Initial seed code for graphadmin

Issue-ID: AAI-1469
Change-Id: Ic170c326ad1fe4b43960de674797766f6f7b94bf
Signed-off-by: Kajur, Harish (vk250x) <vk250x@att.com>

18 files changed, 1086 insertions, 0 deletions

diff --git a/src/main/scripts/audit_schema.sh b/src/main/scripts/audit_schema.sh
new file mode 100644
index 0000000..686dd49
--- /dev/null
+++ b/src/main/scripts/audit_schema.sh
@@ -0,0 +1,32 @@
+#!/bin/sh
+#
+# ============LICENSE_START=======================================================
+# org.onap.aai
+# ================================================================================
+# Copyright © 2017 AT&T Intellectual Property. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#    http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+#
+# ECOMP is a trademark and service mark of AT&T Intellectual Property.
+#
+#
+COMMON_ENV_PATH=$( cd "$(dirname "$0")" ; pwd -P )
+. ${COMMON_ENV_PATH}/common_functions.sh
+
+start_date;
+check_user;
+source_profile;
+execute_spring_jar org.onap.aai.db.schema.ScriptDriver "/opt/app/aai-graphadmin/resources/logback.xml" "$@"
+end_date;
+exit 0
diff --git a/src/main/scripts/common_functions.sh b/src/main/scripts/common_functions.sh
new file mode 100644
index 0000000..ed795fe
--- /dev/null
+++ b/src/main/scripts/common_functions.sh
@@ -0,0 +1,65 @@
+#!/bin/ksh
+#
+# Common functions that can be used throughout multiple scripts
+# In order to call these functions, this file needs to be sourced
+
+# Checks if the user that is currently running is aaiadmin
+check_user(){
+
+    userid=$( id | cut -f2 -d"(" | cut -f1 -d")" )
+
+    if [ "${userid}" != "aaiadmin" ]; then
+        echo "You must be aaiadmin to run $0. The id used $userid."
+        exit 1
+    fi
+}
+
+# Sources the profile and sets the project home
+source_profile(){
+    . /etc/profile.d/aai.sh
+    PROJECT_HOME=/opt/app/aai-graphadmin
+}
+
+# Runs the spring boot jar based on which main class
+# to execute and which logback file to use for that class
+execute_spring_jar(){
+
+    className=$1;
+    logbackFile=$2;
+
+    shift 2;
+
+    EXECUTABLE_JAR=$(ls ${PROJECT_HOME}/lib/*.jar);
+
+    JAVA_OPTS="${JAVA_PRE_OPTS} -DAJSC_HOME=$PROJECT_HOME";
+    JAVA_OPTS="$JAVA_OPTS -DBUNDLECONFIG_DIR=resources";
+    JAVA_OPTS="$JAVA_OPTS -Daai.home=$PROJECT_HOME ";
+    JAVA_OPTS="$JAVA_OPTS -Dhttps.protocols=TLSv1.1,TLSv1.2";
+    JAVA_OPTS="$JAVA_OPTS -Dloader.main=${className}";
+    JAVA_OPTS="$JAVA_OPTS -Dloader.path=${PROJECT_HOME}/resources";
+    JAVA_OPTS="$JAVA_OPTS -Dlogback.configurationFile=${logbackFile}";
+
+    export SOURCE_NAME=$(grep '^schema.source.name=' ${PROJECT_HOME}/resources/application.properties | cut -d"=" -f2-);
+    # Needed for the schema ingest library beans
+    eval $(grep '^schema\.' ${PROJECT_HOME}/resources/application.properties | \
+     sed 's/^\(.*\)$/JAVA_OPTS="$JAVA_OPTS -D\1"/g' | \
+     sed 's/${server.local.startpath}/${PROJECT_HOME}\/resources/g'| \
+     sed 's/${schema.source.name}/'${SOURCE_NAME}'/g'\
+    )
+
+    JAVA_OPTS="${JAVA_OPTS} ${JAVA_POST_OPTS}";
+
+    ${JAVA_HOME}/bin/java ${JVM_OPTS} ${JAVA_OPTS} -jar ${EXECUTABLE_JAR} "$@"
+}
+
+# Prints the start date and the script that the user called
+start_date(){
+    echo
+    echo `date` "   Starting $0"
+}
+
+# Prints the end date and the script that the user called
+end_date(){
+    echo
+    echo `date` "   Done $0"
+}
diff --git a/src/main/scripts/createDBSchema.sh b/src/main/scripts/createDBSchema.sh
new file mode 100644
index 0000000..01fef07
--- /dev/null
+++ b/src/main/scripts/createDBSchema.sh
@@ -0,0 +1,44 @@
+#!/bin/ksh
+#
+# ============LICENSE_START=======================================================
+# org.onap.aai
+# ================================================================================
+# Copyright © 2017 AT&T Intellectual Property. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#    http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+#
+# ECOMP is a trademark and service mark of AT&T Intellectual Property.
+# The script invokes GenTester java class to create the DB schema
+#
+# NOTE: you can pass an option GEN_DB_WITH_NO_SCHEMA if you want it to create an instance of
+#       the graph - but with no schema (this is useful when using the Hbase copyTable to
+#       copy our database to different environments).
+#       Ie. createDbSchema.sh GEN_DB_WITH_NO_SCHEMA
+#
+#
+#
+#
+
+COMMON_ENV_PATH=$( cd "$(dirname "$0")" ; pwd -P )	
+. ${COMMON_ENV_PATH}/common_functions.sh
+start_date;
+check_user;
+source_profile;
+if [ -z "$1" ]; then
+    execute_spring_jar org.onap.aai.schema.GenTester ${PROJECT_HOME}/resources/logback.xml
+else
+    execute_spring_jar org.onap.aai.schema.GenTester ${PROJECT_HOME}/resources/logback.xml "$1"
+fi;
+end_date;
+exit 0
\ No newline at end of file
diff --git a/src/main/scripts/dataGrooming.sh b/src/main/scripts/dataGrooming.sh
new file mode 100644
index 0000000..a6b5f4f
--- /dev/null
+++ b/src/main/scripts/dataGrooming.sh
@@ -0,0 +1,116 @@
+#!/bin/ksh
+#
+# The script invokes the dataGrooming java class to run some tests and generate a report and
+#     potentially do some auto-deleteing.
+#
+# Here are the allowed Parameters.  Note - they are all optional and can be mixed and matched.
+#
+#  -f oldFileName  (see note below)
+#  -autoFix 
+#  -sleepMinutes nn
+#  -edgesOnly
+#  -skipEdges
+#  -timeWindowMinutes nn
+#  -dontFixOrphans
+#  -maxFix
+#  -skipHostCheck
+#  -singleCommits
+#  -dupeCheckOff
+#  -dupeFixOn
+#  -ghost2CheckOff
+#  -ghost2FixOn
+#
+#
+#
+#
+# NOTES:
+# -f  The name of a previous report can optionally be passed in with the "-f" option. 
+#     Just the filename --  ie. "dataGrooming.sh -f dataGrooming.201504272106.out"   
+#     The file will be assumed to be in the directory that it was created in.
+#     If a filename is passed, then the "deleteCandidate" vertex-id's and bad edges
+#     listed inside that report file will be deleted on this run if they are encountered as
+#     bad nodes/edges again.
+#     
+# -autoFix  If you don't use the "-f" option, you could choose to use "-autofix" which will
+#           automatically run the script twice: once to look for problems, then after 
+#           sleeping for a few minutes, it will re-run with the inital-run's output as
+#           an input file.  
+#
+# -maxFix   When using autoFix, you might want to limit how many 'bad' records get fixed.
+#           This is a safeguard against accidently deleting too many records automatically.
+#           It has a default value set in AAIConstants:  AAI_GROOMING_DEFAULT_MAX_FIX = 15;
+#           If there are more than maxFix candidates found -- then none will be deleted (ie. 
+#           someone needs to look into it)
+# 
+# -sleepMinutes   When using autoFix, this defines how many minutes we sleep before the second run.
+#           It has a default value set in AAIConstants:  AAI_GROOMING_DEFAULT_SLEEP_MINUTES = 7;
+#           The reason we sleep at all between runs is that our DB is "eventually consistant", so
+#           we want to give it time to resolve itself if possible.
+#
+# -edgesOnly    Can be used any time you want to limit this tool so it only looks at edges.
+#            Note - as of 1710, we have not been seeing many purely bad edges, 
+#            (ie. not associated with a phantom node) so this option is not used often.
+#           
+# -skipEdgeChecks  Use it to bypass checks for bad Edges (which are pretty rare).
+#
+# -timeWindowMinutes   Use it to limit the nodes looked at to ones whose update-timestamp tells us that it was last updated less than this many minutes ago.  Note this is usually used along with the skipEdgeChecks option.
+#
+# -dontFixOrphans   Since there can sometimes be a lot of orphan nodes, and they don't 
+#           harm processing as much as phantom-nodes or bad-edges, it is useful to be
+#           able to ignore them when fixing things.  
+#
+# -skipHostCheck    By default, the grooming tool will check to see that it is running
+#           on the host that is the first one in the list found in:
+#               aaiconfig.properties  aai.primary.filetransfer.serverlist
+#           This is so that when run from the cron, it only runs on one machine.
+#           This option lets you turn that checking off.
+#
+# -singleCommits    By default, the grooming tool will do all of its processing and then do
+#           a commit of all the changes at once.  This option (maybe could have been named better)
+#           is letting the user override the default behavior and do a commit for each
+#           individual 'remove" one by one as they are encountered by the grooming logic. 
+#           NOTE - this only applies when using either the "-f" or "-autoFix" options since 
+#           those are the only two that make changes to the database.
+#
+# -dupeCheckOff    By default, we will check all of our nodes for duplicates.  This parameter lets
+#           us turn this check off if we don't want to do it for some reason.
+#
+# -dupeFixOn    When we're fixing data, by default we will NOT fix duplicates  This parameter lets us turn 
+#           that fixing ON when we are comfortable that it can pick the correct duplicate to preserve. 
+#
+# -ghost2CheckOff    By default, we will check for the "new" kind of ghost that we saw on
+#           Production in early February 2016.  This parameter lets us turn this check off if we 
+#           don't want to do it for some reason.
+#
+# -ghost2FixOn    When we're fixing data, by default we will NOT try to fix the "new" ghost nodes.  
+#           This parameter lets us turn that fixing ON if we want to try to fix them. 
+#
+#
+COMMON_ENV_PATH=$( cd "$(dirname "$0")" ; pwd -P )
+. ${COMMON_ENV_PATH}/common_functions.sh
+
+# TODO: There is a better way where you can pass in the function
+# and then let the common functions check if the function exist and invoke it
+# So this all can be templated out
+start_date;
+check_user;
+
+processStat=$(ps -ef | grep '[D]ataGrooming');
+if [ "$processStat" != "" ]
+	then
+	echo "Found dataGrooming is already running: " $processStat
+	exit 1
+fi
+
+# Make sure that it's not already running
+processStat=`ps -ef|grep aaiadmin|grep -E "org.onap.aai.dbgen.DataGrooming"|grep -v grep`
+if [ "$processStat" != "" ]
+	then
+	echo "Found dataGrooming is already running: " $processStat
+	exit 1
+fi
+
+source_profile;
+execute_spring_jar org.onap.aai.datagrooming.DataGrooming $PROJECT_HOME/resources/logback.xml "$@"
+end_date;
+exit 0
diff --git a/src/main/scripts/dataRestoreFromSnapshot.sh b/src/main/scripts/dataRestoreFromSnapshot.sh
new file mode 100644
index 0000000..405a667
--- /dev/null
+++ b/src/main/scripts/dataRestoreFromSnapshot.sh
@@ -0,0 +1,50 @@
+#!/bin/ksh
+#
+# This script uses the dataSnapshot and SchemaGenerator (via GenTester) java classes to restore 
+# data to a database by doing three things: 
+#   1) clear out whatever data and schema are currently in the db 
+#   2) rebuild the schema (using the SchemaGenerator)
+#   3) reload data from the passed-in datafile (which must found in the dataSnapShots directory and
+#      contain an xml view of the db data).
+#
+
+COMMON_ENV_PATH=$( cd "$(dirname "$0")" ; pwd -P )
+. ${COMMON_ENV_PATH}/common_functions.sh
+
+start_date;
+check_user;
+
+if [ "$#" -lt 1 ]; then
+    echo "Illegal number of parameters"
+    echo "usage: $0 previous_snapshot_filename"
+    exit 1
+fi
+
+source_profile;
+export PRE_JAVA_OPTS=${PRE_JAVA_OPTS:--Xms6g -Xmx8g};
+
+#### Step 1) clear out the database
+execute_spring_jar org.onap.aai.datasnapshot.DataSnapshot ${PROJECT_HOME}/resources/logback.xml "CLEAR_ENTIRE_DATABASE" "$1" "$2"
+if [ "$?" -ne "0" ]; then
+    echo "Problem clearing out database."
+    exit 1
+fi
+ 
+#### Step 2) rebuild the db-schema
+execute_spring_jar org.onap.aai.schema.GenTester ${PROJECT_HOME}/resources/logback.xml "GEN_DB_WITH_NO_DEFAULT_CR"
+if [ "$?" -ne "0" ]; then
+    echo "Problem rebuilding the schema (SchemaGenerator)."
+    exit 1
+fi
+
+#### Step 3) reload the data from a snapshot file
+
+execute_spring_jar org.onap.aai.datasnapshot.DataSnapshot ${PROJECT_HOME}/resources/logback.xml "RELOAD_DATA" "$1"
+if [ "$?" -ne "0" ]; then
+    echo "Problem reloading data into the database."
+    end_date;
+    exit 1
+fi
+ 
+end_date;
+exit 0
diff --git a/src/main/scripts/dataSnapshot.sh b/src/main/scripts/dataSnapshot.sh
new file mode 100644
index 0000000..f380e85
--- /dev/null
+++ b/src/main/scripts/dataSnapshot.sh
@@ -0,0 +1,28 @@
+#!/bin/ksh
+#
+# This script invokes the dataSnapshot java class passing an option to tell it to take
+# a snapshot of the database and store it as a single-line XML file.
+#
+#
+#
+#
+#
+COMMON_ENV_PATH=$( cd "$(dirname "$0")" ; pwd -P )
+. ${COMMON_ENV_PATH}/common_functions.sh
+
+processStat=$(ps -ef | grep '[D]ataSnapshot');
+if [ "$processStat" != "" ]
+	then
+	echo "Found dataSnapshot is already running: " $processStat
+	exit 1
+fi
+
+# TODO: There is a better way where you can pass in the function
+# and then let the common functions check if the function exist and invoke it
+# So this all can be templated out
+start_date;
+check_user;
+source_profile;
+execute_spring_jar org.onap.aai.datasnapshot.DataSnapshot $PROJECT_HOME/resources/logback.xml "$@"
+end_date;
+exit 0
diff --git a/src/main/scripts/dupeTool.sh b/src/main/scripts/dupeTool.sh
new file mode 100644
index 0000000..350b0bd
--- /dev/null
+++ b/src/main/scripts/dupeTool.sh
@@ -0,0 +1,73 @@
+#!/bin/ksh
+
+###
+# ============LICENSE_START=======================================================
+# org.onap.aai
+# ================================================================================
+# Copyright (C) 2017 AT&T Intellectual Property. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+# 
+#      http://www.apache.org/licenses/LICENSE-2.0
+# 
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+###
+#
+#
+# dupeTool.sh  -- This tool is used to look at or fix duplicate nodes for one nodeType
+#       at a time and can be used to limit what it's looking at to just nodes created
+#       within a recent time window.
+#       It is made to deal with situations (like we have in 1610/1702) where one type
+#       of node keeps needing to have duplicates cleaned up (tenant nodes).
+#       It is needed because DataGrooming cannot be run often and cannot be focused just
+#       on duplicates or just on one nodeType.
+#
+# Parameters:
+#
+#  -userId (required) must be followed by a userid
+#  -nodeType (required) must be followed by a valid nodeType
+#  -timeWindowMinutes (optional) by default we would look at all nodes of the
+#        given nodeType, but if a window is given, then we will only look at
+#        nodes created that many (or fewer) minutes ago.
+#  -autoFix (optional) use this if you want duplicates fixed automatically (if we
+#           can figure out which to delete)
+#  -maxFix (optional) like with dataGrooming lets you override the default maximum 
+#           number of dupes that can be processed at one time
+#  -skipHostCheck (optional) By default, the dupe tool will check to see that it is running
+#           on the host that is the first one in the list found in:
+#               aaiconfig.properties  aai.primary.filetransfer.serverlist
+#           This is so that when run from the cron, it only runs on one machine.
+#           This option lets you turn that checking off.
+#  -sleepMinutes (optional) like with DataGrooming, you can override the 
+#           sleep time done when doing autoFix between first and second checks of the data.
+#  -params4Collect (optional) followed by a string to tell what properties/values to use 
+#  		to limit the nodes being looked at.  Must be in the format
+#  		of “propertName|propValue” use commas to separate if there
+#  		are more than one name/value being passed.
+#  -specialTenantRule (optional) turns on logic which will use extra logic to figure
+#       out which tenant node can be deleted in a common scenario.
+#  
+#  
+#  For example (there are many valid ways to use it):
+#  
+#  dupeTool.sh -userId am8383 -nodeType tenant -timeWindowMinutes 60 -autoFix
+#  or
+#  dupeTool.sh -userId am8383 -nodeType tenant -specialTenantRule -autoFix -maxFix 100
+# 
+
+COMMON_ENV_PATH=$( cd "$(dirname "$0")" ; pwd -P )
+. ${COMMON_ENV_PATH}/common_functions.sh
+
+start_date;
+check_user;
+source_profile;
+execute_spring_jar org.onap.aai.dbgen.DupeTool ${PROJECT_HOME}/resources/dupeTool-logback.xml "$@"
+end_date;
+exit 0
\ No newline at end of file
diff --git a/src/main/scripts/dynamicPayloadArchive.sh b/src/main/scripts/dynamicPayloadArchive.sh
new file mode 100644
index 0000000..87cce13
--- /dev/null
+++ b/src/main/scripts/dynamicPayloadArchive.sh
@@ -0,0 +1,75 @@
+#!/bin/ksh
+#
+###
+# ============LICENSE_START=======================================================
+# org.onap.aai
+# ================================================================================
+# Copyright (C) 2017 AT&T Intellectual Property. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+# 
+#      http://www.apache.org/licenses/LICENSE-2.0
+# 
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+###
+
+#
+# The script is called to tar and gzip the files under /opt/app/aai-graphadmin/data/scriptdata/addmanualdata/tenant_isolation/payload 
+# which contains the payload files created by the dynamicPayloadGenerator.sh tool.
+# /opt/app/aai-graphadmin/data/scriptdata/addmanualdata/tenant_isolation is mounted to the docker container
+#
+
+COMMON_ENV_PATH=$( cd "$(dirname "$0")" ; pwd -P )
+. ${COMMON_ENV_PATH}/common_functions.sh
+
+. /etc/profile.d/aai.sh
+PROJECT_HOME=/opt/app/aai-graphadmin
+
+PROGNAME=$(basename $0)
+
+TS=$(date "+%Y_%m_%d_%H_%M_%S")
+
+CHECK_USER="aaiadmin"
+userid=$( id | cut -f2 -d"(" | cut -f1 -d")" )
+if [ "${userid}" != $CHECK_USER ]; then
+    echo "You must be  $CHECK_USER to run $0. The id used $userid."
+    exit 1
+fi
+PAYLOAD_DIRECTORY=${PROJECT_HOME}/resources/etc/scriptdata/addmanualdata/tenant_isolation/payload
+ARCHIVE_DIRECTORY=${PROJECT_HOME}/resources/etc/scriptdata/addmanualdata/tenant_isolation/archive
+if [ ! -d ${PAYLOAD_DIRECTORY} ]
+then
+	echo " ${PAYLOAD_DIRECTORY} doesn't exist"
+	exit 1
+fi
+if [ ! -d ${ARCHIVE_DIRECTORY} ]
+then
+	mkdir -p ${ARCHIVE_DIRECTORY}
+	chown aaiadmin:aaiadmin ${ARCHIVE_DIRECTORY}
+	chmod u+w ${ARCHIVE_DIRECTORY}
+fi
+cd ${PAYLOAD_DIRECTORY}
+tar c * -f ${ARCHIVE_DIRECTORY}/dynamicPayloadArchive_${TS}.tar --exclude=payload
+if [ $? -ne 0 ]
+then
+	echo " Unable to tar ${PAYLOAD_DIRECTORY}"
+	exit 1
+fi
+
+cd ${ARCHIVE_DIRECTORY}
+gzip ${ARCHIVE_DIRECTORY}/dynamicPayloadArchive_${TS}.tar 
+
+if [ $? -ne 0 ]
+then
+	echo " Unable to gzip ${ARCHIVE_DIRECTORY}/dynamicPayloadArchive_${TS}.tar"
+	exit 1
+fi
+echo "Completed successfully: ${ARCHIVE_DIRECTORY}/dynamicPayloadArchive_${TS}.tar"
+exit 0
diff --git a/src/main/scripts/dynamicPayloadGenerator.sh b/src/main/scripts/dynamicPayloadGenerator.sh
new file mode 100644
index 0000000..3d30790
--- /dev/null
+++ b/src/main/scripts/dynamicPayloadGenerator.sh
@@ -0,0 +1,155 @@
+#!/bin/ksh
+#
+###
+# ============LICENSE_START=======================================================
+# org.onap.aai
+# ================================================================================
+# Copyright (C) 2017 AT&T Intellectual Property. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+# 
+#      http://www.apache.org/licenses/LICENSE-2.0
+# 
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+###
+
+#
+# dynamicPayloadGenerator.sh  -- This tool is used to dynamically load payloads from snapshots
+#       It is used to load a snapshot into memory and generate payloads for any input nodes
+#       
+#
+# Parameters:
+#
+#  -d (required) name of the fully qualified Datasnapshot file that you need to load
+#  -s (optional) true or false to enable or disable schema, By default it is true for production, 
+# 	     you can change to false if the snapshot has duplicates
+#  -c (optional) config file to use for loading snapshot into memory.
+#  -o (required) output file to store the data files
+#  -f (optional) PAYLOAD or DMAAP-MR
+#  -n (optional) input file for the script 
+#  
+#  
+#  For example (there are many valid ways to use it):
+#  
+#  dynamicPayloadGenerator.sh -d '/opt/app/snapshots/snaphot.graphSON' -o '/opt/app/aai-graphadmin/resources/etc/scriptdata/addmanualdata/payload_dir/'
+#              
+#  or
+#  dynamicPayloadGenerator.sh -d '/opt/app/snapshots/snaphot.graphSON' -s false -c '/opt/app/aai-graphadmin/resources/etc/appprops/dynamic.properties'
+#					-o '/opt/app/aai-graphadmin/resources/etc/scriptdata/addmanualdata/payload_dir/' -f PAYLOAD -n '/opt/app/aai-graphadmin/resources/etc/scriptdata/nodes.json'
+# 
+
+
+echo
+echo `date` "   Starting $0"
+
+display_usage() {
+        cat <<EOF
+        Usage: $0 [options]
+
+        1. Usage: dynamicPayloadGenerator -d <graphsonPath> -o  <output-path>
+        2. This script has  2 arguments that are required.
+           a.	-d (required) Name of the fully qualified Datasnapshot file that you need to load
+           b.	-o (required) output file to store the data files
+        3. Optional Parameters:
+		   a.   -s (optional) true or false to enable or disable schema, By default it is true for production, 
+		   b.	-c (optional) config file to use for loading snapshot into memory. By default it is set to /opt/app/aai-graphadmin/resources/etc/appprops/dynamic.properties
+		   c.	-f (optional) PAYLOAD or DMAAP-MR
+		   d.	-n (optional) input file specifying the nodes and relationships to export. Default: /opt/app/aai-graphadmin/scriptdata/tenant_isolation/nodes.json
+		   e.   -m (optional) true or false to read multiple snapshots or not, by default is false
+		   f.   -i (optional) the file containing the input filters based on node property and regex/value. By default, it is: /opt/app/aai-graphadmin/scriptdata/tenant_isolation/inputFilters.json
+		4. For example (there are many valid ways to use it):
+			dynamicPayloadGenerator.sh -d '/opt/app/snapshots/snaphot.graphSON' -o '/opt/app/aai-graphadmin/resources/etc/scriptdata/addmanualdata/tenant_isolation/'
+				
+			dynamicPayloadGenerator.sh -d '/opt/app/snapshots/snaphot.graphSON' -s false -c '/opt/app/aai-graphadmin/resources/etc/appprops/dynamic.properties'
+					-o '/opt/app/aai-graphadmin/resources/etc/scriptdata/addmanualdata/tenant_isolation/' -f PAYLOAD -n '/opt/app/aai-graphadmin/resources/etc/scriptdata/tenant_isolation/nodes.json'
+					-m false -i '/opt/app/aai-graphadmin/resources/etc/scriptdata/tenant_isolation/inputFilters.json'
+   
+EOF
+}
+if [ $# -eq 0 ]; then
+        display_usage
+        exit 1
+fi
+
+COMMON_ENV_PATH=$( cd "$(dirname "$0")" ; pwd -P )
+. ${COMMON_ENV_PATH}/common_functions.sh
+
+start_date;
+check_user;
+source_profile;
+export JVM_OPTS="-Xmx9000m -Xms9000m"
+
+while getopts ":f:s:d:n:c:i:m:o:p:" opt; do
+      case ${opt} in
+        f )
+          PAYLOAD=$OPTARG
+          echo ${opt}
+          ;;
+        s )
+          VALIDATE_SCHEMA=$OPTARG
+          echo ${opt}
+          ;;
+        d )
+          INPUT_DATASNAPSHOT_FILE=$OPTARG
+          echo ${opt}
+          ;;
+        n )
+          NODE_CONFIG_FILE=$OPTARG
+          echo ${opt}
+          ;;
+        c )
+          DYNAMIC_CONFIG_FILE=$OPTARG
+          echo ${opt}
+          ;;
+        i )
+          INPUT_FILTER_FILE=$OPTARG
+          echo ${opt}
+          ;;
+        m )
+          MULTIPLE_SNAPSHOTS=$OPTARG
+          echo ${opt}
+          ;;
+        p )
+          PARTIAL=$OPTARG
+          echo ${opt}
+          ;;
+        o )
+          OUTPUT_DIR=$OPTARG
+          echo ${opt}
+          ;;
+        \? )
+          echo "Invalid Option: -$OPTARG" 1>&2
+          ;;
+        : )
+          echo "Invalid Option: -$OPTARG requires an argument" 1>&2
+          ;;
+      esac
+    done
+    shift $((OPTIND -1))
+
+echo 'Done'
+
+set -A nodes pserver cloud-region availability-zone tenant zone complex
+
+#Create empty partial file
+ > $INPUT_DATASNAPSHOT_FILE".partial"
+
+for nodeType in ${nodes[@]}
+	do
+         grep "aai-node-type.*\"value\":\"$nodeType\"" $INPUT_DATASNAPSHOT_FILE >>$INPUT_DATASNAPSHOT_FILE'.partial'
+    done
+
+
+execute_spring_jar org.onap.aai.dbgen.DynamicPayloadGenerator ${PROJECT_HOME}/resources/dynamicPayloadGenerator-logback.xml -s ${VALIDATE_SCHEMA} \
+		-f ${PAYLOAD} -o ${OUTPUT_DIR} -c ${DYNAMIC_CONFIG_FILE} -i ${INPUT_FILTER_FILE} -m ${MULTIPLE_SNAPSHOTS} \
+		-d ${INPUT_DATASNAPSHOT_FILE} -n ${NODE_CONFIG_FILE} ;
+		
+end_date;
+exit 0
diff --git a/src/main/scripts/dynamicPayloadPartial.sh b/src/main/scripts/dynamicPayloadPartial.sh
new file mode 100644
index 0000000..8021aa6
--- /dev/null
+++ b/src/main/scripts/dynamicPayloadPartial.sh
@@ -0,0 +1,13 @@
+#!/bin/ksh
+
+#Create empty partial snapshot file
+INPUT_DATASNAPSHOT_FILE=$1
+
+set -A nodes pserver cloud-region availability-zone tenant zone complex
+ > $INPUT_DATASNAPSHOT_FILE".partial"
+
+for nodeType in ${nodes[@]}
+	do
+         grep "aai-node-type.*\"value\":\"$nodeType\"" $INPUT_DATASNAPSHOT_FILE >>$INPUT_DATASNAPSHOT_FILE'.partial'
+    done
+exit 0
\ No newline at end of file
diff --git a/src/main/scripts/forceDeleteTool.sh b/src/main/scripts/forceDeleteTool.sh
new file mode 100644
index 0000000..2d42fda
--- /dev/null
+++ b/src/main/scripts/forceDeleteTool.sh
@@ -0,0 +1,84 @@
+#!/bin/ksh
+#
+# ============LICENSE_START=======================================================
+# org.onap.aai
+# ================================================================================
+# Copyright © 2017 AT&T Intellectual Property. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#    http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+#
+# ECOMP is a trademark and service mark of AT&T Intellectual Property.
+#
+#
+#
+# forceDeleteTool.sh  -- This tool is used to delete nodes that cannot be deleted using
+#        the normal REST API because of internal DB problems.  For example, Phantom nodes
+#        and duplicate nodes cause errors to happen in "normal" REST API codes and must
+#        be deleted using this tool.  
+#        Since it is not using the "normal" REST logic, it is also not invoking the "normal" 
+#        edge rules that we use to cascade deletes to "child" nodes.  So - this tool can be dangerous.  
+#        Ie. if you accidently delete a parent node (like a cloud-region) that has many dependent 
+#        child nodes, there will be no way to get to any of those child-nodes after the cloud-region
+#        has been deleted.  
+#        There are several environment variables defined in aaiconfig.properties to help minimize errors like that.
+#                aai.forceDel.protected.nt.list=cloud-region
+#                aai.forceDel.protected.edge.count=10
+#                aai.forceDel.protected.descendant.count=10
+#
+# Parameters:
+#
+#  -action (required) valid values: COLLECT_DATA or DELETE_NODE or DELETE_EDGE
+#  -userId (required) must be followed by a userid
+#  -params4Collect (followed by a string to tell what properties/values to use 
+#  		as part of a COLLECT_DATA request.  Must be in the format
+#  		of ?propertName|propValue? use commas to separate if there
+#  		are more than one name/value being passed.
+#  -vertexId - required for a DELETE_NODE request
+#  -edgeId - required for a DELETE_EDGE request
+#  -overRideProtection --- WARNING ? This over-rides the protections we introduced!
+#       It will let you override a protected vertex or vertex that has more
+#       than the allowed number of edges or descendants.
+#  -DISPLAY_ALL_VIDS (optional) - in the rare case when you want to see the 
+#       vertex-ids (vids) of all the CONNECTED vertices, you can use this.  By 
+#       default, we do not show them.
+#  
+#  
+#  For example:
+#  
+#  forceDeleteTool.sh -action COLLECT_DATA -userId am8383 -params4Collect "tenant-id|junk tenant01 ID 0224"
+#  
+#  forceDeleteTool.sh -action COLLECT_DATA -userId am8383 -params4Collect "cloud-owner|junkTesterCloudOwner 0224,cloud-region-id|junkTesterCloud REgion ID 0224"
+#
+#  forceDeleteTool.sh -action DELETE_NODE -userId am8383 -vertexId 1234567
+#
+#  forceDeleteTool.sh -action DELETE_EDGE -userId am8383 -edgeId 9876543
+#
+# 
+
+COMMON_ENV_PATH=$( cd "$(dirname "$0")" ; pwd -P )
+. ${COMMON_ENV_PATH}/common_functions.sh
+
+start_date;
+
+echo " NOTE - if you are deleting data, please run the dataSnapshot.sh script first or "
+echo "     at least make a note the details of the node that you are deleting. "
+
+check_user;
+source_profile;
+
+execute_spring_jar org.onap.aai.dbgen.ForceDeleteTool ${PROJECT_HOME}/resources/forceDelete-logback.xml "$@"
+
+end_date;
+
+exit 0
diff --git a/src/main/scripts/migration_verification.sh b/src/main/scripts/migration_verification.sh
new file mode 100644
index 0000000..1e1b228
--- /dev/null
+++ b/src/main/scripts/migration_verification.sh
@@ -0,0 +1,61 @@
+#!/bin/ksh
+
+###
+# ============LICENSE_START=======================================================
+# org.onap.aai
+# ================================================================================
+# Copyright (C) 2018 AT&T Intellectual Property. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+# 
+#      http://www.apache.org/licenses/LICENSE-2.0
+# 
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+###
+
+#
+# migration_verification.sh  -- This tool is used to provide a summary of migration logs
+# This searches for pre-defined strings "Migration Error" and "Migration Summary Count" in log files and outputs those lines.
+#
+
+display_usage() {
+  cat << EOF
+  Usage: $0 [options]
+  
+  1. Usage: migration_verification.sh <last_modified> <logs_path>
+  2. The <logs_path> should be a directory containing all of the logs. If empty, default path is /opt/app/aai-graphadmin/logs/migration.
+  3. The <last_modified> parameter should be an integer for up to how many minutes ago a log file should be parsed.
+  4. Example: migration_verification.sh 60 /opt/app/aai-graphadmin/logs/migration
+EOF
+}
+
+if [ $# -eq 0 ]; then
+  display_usage
+  exit 1
+fi
+
+LOGS_DIRECTORY=${2:-/opt/app/aai-graphadmin/logs/migration/}
+MTIME=$1
+
+echo
+echo 'Running migration summary:'
+print "Logs directory: $LOGS_DIRECTORY"
+print "Searching log files modified within last $MTIME minutes: \n"
+echo
+
+for i in $(find -L $LOGS_DIRECTORY -mtime -$MTIME -name '*.log' );
+do
+  echo "Checking Log File: $i"
+  grep "Migration Error:" $i
+  grep "Migration Summary Count:" $i
+  echo
+done
+
+echo 'Done'
diff --git a/src/main/scripts/run_Migrations.sh b/src/main/scripts/run_Migrations.sh
new file mode 100644
index 0000000..2b0f5c5
--- /dev/null
+++ b/src/main/scripts/run_Migrations.sh
@@ -0,0 +1,49 @@
+#!/bin/sh
+
+###
+# ============LICENSE_START=======================================================
+# org.onap.aai
+# ================================================================================
+# Copyright (C) 2017-2018 AT&T Intellectual Property. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+# 
+#      http://www.apache.org/licenses/LICENSE-2.0
+# 
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+###
+
+COMMON_ENV_PATH=$( cd "$(dirname "$0")" ; pwd -P )
+. ${COMMON_ENV_PATH}/common_functions.sh
+
+# TODO: There is a better way where you can pass in the function
+# and then let the common functions check if the function exist and invoke it
+# So this all can be templated out
+start_date;
+check_user;
+source_profile;
+
+ARGS="-c ${PROJECT_HOME}/resources/etc/appprops/janusgraph-realtime.properties";
+
+if [ -f "$PROJECT_HOME/resources/application.properties" ]; then
+    # Get the application properties file and look for all lines
+    # starting with either jms dmaap or niws
+    # Turn them into system properties and export JAVA_PRE_OPTS so
+    # execute spring jar will get those values
+    # This is only needed since dmaap is used by run_migrations
+    JAVA_PRE_OPTS="-Xms8g -Xmx8g";
+    JMS_PROPS=$(egrep '^jms.bind.address' $PROJECT_HOME/resources/application.properties | cut -d"=" -f2- |  sed 's/^\(.*\)$/-Dactivemq.tcp.url=\1/g' | tr '\n' ' ');
+    JAVA_PRE_OPTS="${JAVA_PRE_OPTS} ${JMS_PROPS}";
+    export JAVA_PRE_OPTS;
+fi;
+
+execute_spring_jar org.onap.aai.migration.MigrationController ${PROJECT_HOME}/resources/migration-logback.xml ${ARGS} "$@"
+end_date;
+exit 0
\ No newline at end of file
diff --git a/src/main/scripts/run_SendDeleteMigrationNotification.sh b/src/main/scripts/run_SendDeleteMigrationNotification.sh
new file mode 100644
index 0000000..ebd8677
--- /dev/null
+++ b/src/main/scripts/run_SendDeleteMigrationNotification.sh
@@ -0,0 +1,65 @@
+#!/bin/ksh
+
+###
+# ============LICENSE_START=======================================================
+# org.onap.aai
+# ================================================================================
+# Copyright (C) 2017 AT&T Intellectual Property. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+# 
+#      http://www.apache.org/licenses/LICENSE-2.0
+# 
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+###
+
+COMMON_ENV_PATH=$( cd "$(dirname "$0")" ; pwd -P )
+. ${COMMON_ENV_PATH}/common_functions.sh
+
+
+start_date;
+check_user;
+source_profile;
+
+INPUT_PATH=$1
+
+if [ ! -d "$INPUT_PATH" ]; then
+    echo "Input directory $INPUT_PATH does not exist!!";
+    exit
+fi
+
+if [ $(ls ${INPUT_PATH}/* 2> /dev/null | wc -l) -eq 0 ]; then
+    echo "Input directory $INPUT_PATH does not contain any migration files!!";
+    exit
+fi
+
+INPUT_DIR_FOR_JAVA=${INPUT_PATH}/deleteevents
+mkdir -p "$INPUT_DIR_FOR_JAVA"
+INPUT_FILE_FOR_JAVA=${INPUT_DIR_FOR_JAVA}/dmaap_delete_files.txt
+#sort --numeric-sort -k 1 -t '_' $(find ${INPUT_PATH}/DELETE-* -maxdepth 0 -type f) | awk -F '_' '{ print $2"_"$3; }' > $INPUT_FILE_FOR_JAVA
+find ${INPUT_PATH} -type f -name 'DELETE-*' -exec cat {} + > $INPUT_FILE_FOR_JAVA
+
+shift
+
+ARGS="-c ${PROJECT_HOME}/resources/etc/appprops/janusgraph-realtime.properties --inputFile $INPUT_FILE_FOR_JAVA"
+
+if [ -f "$PROJECT_HOME/resources/application.properties" ]; then
+    # Get the application properties file and look for all lines
+    # starting with either jms dmaap or niws
+    # Turn them into system properties and export JAVA_PRE_OPTS so
+    # execute spring jar will get those values
+    # This is only needed since dmaap is used by run_migrations
+    JAVA_PRE_OPTS=$(egrep '^jms.bind.address' $PROJECT_HOME/resources/application.properties | cut -d"=" -f2- |  sed 's/^\(.*\)$/-Dactivemq.tcp.url=\1/g' | tr '\n' ' ');
+    export JAVA_PRE_OPTS;
+fi;
+
+execute_spring_jar org.onap.aai.util.SendDeleteMigrationNotificationsMain ${PROJECT_HOME}/resources/migration-logback.xml ${ARGS} "$@"
+end_date;
+exit 0
\ No newline at end of file
diff --git a/src/main/scripts/run_SendMigrationNotification.sh b/src/main/scripts/run_SendMigrationNotification.sh
new file mode 100644
index 0000000..4bcc0d9
--- /dev/null
+++ b/src/main/scripts/run_SendMigrationNotification.sh
@@ -0,0 +1,64 @@
+#!/bin/ksh
+
+###
+# ============LICENSE_START=======================================================
+# org.onap.aai
+# ================================================================================
+# Copyright (C) 2017 AT&T Intellectual Property. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+# 
+#      http://www.apache.org/licenses/LICENSE-2.0
+# 
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+###
+
+COMMON_ENV_PATH=$( cd "$(dirname "$0")" ; pwd -P )
+. ${COMMON_ENV_PATH}/common_functions.sh
+
+
+start_date;
+check_user;
+source_profile;
+
+INPUT_PATH=$1
+
+if [ ! -d "$INPUT_PATH" ]; then
+    echo "Input directory $INPUT_PATH does not exist!!";
+    exit
+fi
+
+if [ $(ls ${INPUT_PATH}/* 2> /dev/null | wc -l) -eq 0 ]; then
+    echo "Input directory $INPUT_PATH does not contain any migration files!!";
+    exit
+fi
+
+INPUT_DIR_FOR_JAVA=${INPUT_PATH}/combined
+mkdir -p "$INPUT_DIR_FOR_JAVA"
+INPUT_FILE_FOR_JAVA=${INPUT_DIR_FOR_JAVA}/sorted_dmaap_files.txt
+sort --numeric-sort -k 1 -t '_' $(find ${INPUT_PATH}/* -maxdepth 0 -type f) | awk -F '_' '{ print $2"_"$3; }' > $INPUT_FILE_FOR_JAVA
+
+shift
+
+ARGS="-c ${PROJECT_HOME}/resources/etc/appprops/janusgraph-realtime.properties --inputFile $INPUT_FILE_FOR_JAVA"
+
+if [ -f "$PROJECT_HOME/resources/application.properties" ]; then
+    # Get the application properties file and look for all lines
+    # starting with either jms dmaap or niws
+    # Turn them into system properties and export JAVA_PRE_OPTS so
+    # execute spring jar will get those values
+    # This is only needed since dmaap is used by run_migrations
+    JAVA_PRE_OPTS=$(egrep '^jms.bind.address' $PROJECT_HOME/resources/application.properties | cut -d"=" -f2- |  sed 's/^\(.*\)$/-Dactivemq.tcp.url=\1/g' | tr '\n' ' ');
+    export JAVA_PRE_OPTS;
+fi;
+
+execute_spring_jar org.onap.aai.util.SendMigrationNotificationsMain ${PROJECT_HOME}/resources/migration-logback.xml ${ARGS} "$@"
+end_date;
+exit 0
\ No newline at end of file
diff --git a/src/main/scripts/schemaMod.sh b/src/main/scripts/schemaMod.sh
new file mode 100644
index 0000000..d1fb009
--- /dev/null
+++ b/src/main/scripts/schemaMod.sh
@@ -0,0 +1,50 @@
+#!/bin/ksh
+#
+# This script is used to correct mistakes made in the database schema.  
+# It currently just allows you to change either the dataType and/or indexType on properties used by nodes.    
+#
+# NOTE - Titan is not elegant in 0.5.3 about making changes to the schema.  Bad properties never
+#       actually leave the database, they just get renamed and stop getting used.  So it is 
+#       really worthwhile to get indexes and dataTypes correct the first time around.
+# Note also - This script just makes changes to the schema that is currently live.
+#    If you were to create a new schema in a brandy-new environment, it would look like
+#    whatever ex5.json (as of June 2015) told it to look like.   So, part of making a 
+#    change to the db schema should Always first be to make the change in ex5.json so that
+#    future environments will have the change.  This script is just to change existing
+#    instances of the schema since schemaGenerator (as of June 2015) does not update things - it 
+#    just does the initial creation.
+#
+# Boy, this is getting to be a big comment section...
+#
+# To use this script, you need to pass four parameters:
+#      propertyName    -- the name of the property that you need to change either the index or dataType on
+#      targetDataType  -- whether it's changing or not, you need to give it:  String, Integer, Boolean or Long
+#      targetIndexInfo -- whether it's changing or not, you need to give it: index, noIndex or uniqueIndex
+#      preserveDataFlag -- true or false.     The only reason I can think of why you'd ever want to
+#                   set this to false would be maybe if you were changing to an incompatible dataType so didn't 
+#                   want it to try to use the old data (and fail).  But 99% of the time this will just be 'true'.
+#
+# Ie.    schemaMod flavor-id String index true
+#
+
+COMMON_ENV_PATH=$( cd "$(dirname "$0")" ; pwd -P )	
+. ${COMMON_ENV_PATH}/common_functions.sh
+start_date;
+check_user;
+
+if [ "$#" -ne 4 ]; then
+    echo "Illegal number of parameters"
+    echo "usage: $0 propertyName targetDataType targetIndexInfo preserveDataFlag"
+    exit 1
+fi
+
+source_profile;
+execute_spring_jar org.onap.aai.dbgen.schemamod.SchemaMod ${PROJECT_HOME}/resources/schemaMod-logback.xml "$1" "$2" "$3" "$4"
+if [ "$?" -ne "0" ]; then
+    echo "Problem executing schemaMod "
+    end_date;
+    exit 1
+fi
+ 
+end_date;
+exit 0
diff --git a/src/main/scripts/uniquePropertyCheck.sh b/src/main/scripts/uniquePropertyCheck.sh
new file mode 100644
index 0000000..c3c92bf
--- /dev/null
+++ b/src/main/scripts/uniquePropertyCheck.sh
@@ -0,0 +1,24 @@
+#!/bin/ksh
+#
+# The script invokes UniqueProperty java class to see if the passed property is unique in the db and if
+#    not, to display where duplicate values are found.
+#
+# For example:    uniquePropertyCheck.sh subscriber-name
+#
+
+COMMON_ENV_PATH=$( cd "$(dirname "$0")" ; pwd -P )	
+. ${COMMON_ENV_PATH}/common_functions.sh
+start_date;
+check_user;
+source_profile;
+
+#execute_spring_jar org.onap.aai.util.UniquePropertyCheck ${PROJECT_HOME}/resources/uniquePropertyCheck-logback.xml "$@"
+execute_spring_jar org.onap.aai.util.UniquePropertyCheck ${PROJECT_HOME}/resources/uniquePropertyCheck-logback.xml "$@"
+ret_code=$?
+if [ $ret_code != 0 ]; then
+  end_date;
+  exit $ret_code
+fi
+
+end_date;
+exit 0
\ No newline at end of file
diff --git a/src/main/scripts/updatePem.sh b/src/main/scripts/updatePem.sh
new file mode 100644
index 0000000..e43a2eb
--- /dev/null
+++ b/src/main/scripts/updatePem.sh
@@ -0,0 +1,38 @@
+#!/bin/ksh
+
+###
+# ============LICENSE_START=======================================================
+# org.onap.aai
+# ================================================================================
+# Copyright (C) 2017 AT&T Intellectual Property. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+###
+#
+COMMON_ENV_PATH=$( cd "$(dirname "$0")" ; pwd -P )
+. ${COMMON_ENV_PATH}/common_functions.sh
+
+start_date;
+check_user;
+source_profile;
+
+CERTPATH=$PROJECT_HOME/resources/etc/auth/
+KEYNAME=aaiClientPrivateKey.pem
+CERTNAME=aaiClientPublicCert.pem
+
+pw=$(execute_spring_jar org.onap.aai.util.AAIConfigCommandLinePropGetter "" "aai.keystore.passwd" 2> /dev/null | tail -1)
+openssl pkcs12 -in ${CERTPATH}/aai-client-cert.p12 -out $CERTPATH$CERTNAME -clcerts -nokeys -passin pass:$pw
+openssl pkcs12 -in ${CERTPATH}/aai-client-cert.p12 -out $CERTPATH$KEYNAME -nocerts -nodes -passin pass:$pw
+end_date;
+exit 0
\ No newline at end of file