diff options
Diffstat (limited to 'httpserver/src/main/assembly/tomcat/bin')
| -rw-r--r-- | httpserver/src/main/assembly/tomcat/bin/catalina.bat | 350 | ||||
| -rw-r--r-- | httpserver/src/main/assembly/tomcat/bin/catalina.sh | 616 |
2 files changed, 0 insertions, 966 deletions
diff --git a/httpserver/src/main/assembly/tomcat/bin/catalina.bat b/httpserver/src/main/assembly/tomcat/bin/catalina.bat deleted file mode 100644 index 49864c5..0000000 --- a/httpserver/src/main/assembly/tomcat/bin/catalina.bat +++ /dev/null @@ -1,350 +0,0 @@ -@echo off
-rem Licensed to the Apache Software Foundation (ASF) under one or more
-rem contributor license agreements. See the NOTICE file distributed with
-rem this work for additional information regarding copyright ownership.
-rem The ASF licenses this file to You under the Apache License, Version 2.0
-rem (the "License"); you may not use this file except in compliance with
-rem the License. You may obtain a copy of the License at
-rem
-rem http://www.apache.org/licenses/LICENSE-2.0
-rem
-rem Unless required by applicable law or agreed to in writing, software
-rem distributed under the License is distributed on an "AS IS" BASIS,
-rem WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-rem See the License for the specific language governing permissions and
-rem limitations under the License.
-
-rem ---------------------------------------------------------------------------
-rem Start/Stop Script for the CATALINA Server
-rem
-rem Environment Variable Prerequisites
-rem
-rem Do not set the variables in this script. Instead put them into a script
-rem setenv.bat in CATALINA_BASE/bin to keep your customizations separate.
-rem
-rem WHEN RUNNING TOMCAT AS A WINDOWS SERVICE:
-rem Note that the environment variables that affect the behavior of this
-rem script will have no effect at all on Windows Services. As such, any
-rem local customizations made in a CATALINA_BASE/bin/setenv.bat script
-rem will also have no effect on Tomcat when launched as a Windows Service.
-rem The configuration that controls Windows Services is stored in the Windows
-rem Registry, and is most conveniently maintained using the "tomcatXw.exe"
-rem maintenance utility, where "X" is the major version of Tomcat you are
-rem running.
-rem
-rem CATALINA_HOME May point at your Catalina "build" directory.
-rem
-rem CATALINA_BASE (Optional) Base directory for resolving dynamic portions
-rem of a Catalina installation. If not present, resolves to
-rem the same directory that CATALINA_HOME points to.
-rem
-rem CATALINA_OPTS (Optional) Java runtime options used when the "start",
-rem "run" or "debug" command is executed.
-rem Include here and not in JAVA_OPTS all options, that should
-rem only be used by Tomcat itself, not by the stop process,
-rem the version command etc.
-rem Examples are heap size, GC logging, JMX ports etc.
-rem
-rem CATALINA_TMPDIR (Optional) Directory path location of temporary directory
-rem the JVM should use (java.io.tmpdir). Defaults to
-rem %CATALINA_BASE%\temp.
-rem
-rem JAVA_HOME Must point at your Java Development Kit installation.
-rem Required to run the with the "debug" argument.
-rem
-rem JRE_HOME Must point at your Java Runtime installation.
-rem Defaults to JAVA_HOME if empty. If JRE_HOME and JAVA_HOME
-rem are both set, JRE_HOME is used.
-rem
-rem JAVA_OPTS (Optional) Java runtime options used when any command
-rem is executed.
-rem Include here and not in CATALINA_OPTS all options, that
-rem should be used by Tomcat and also by the stop process,
-rem the version command etc.
-rem Most options should go into CATALINA_OPTS.
-rem
-rem JPDA_TRANSPORT (Optional) JPDA transport used when the "jpda start"
-rem command is executed. The default is "dt_socket".
-rem
-rem JPDA_ADDRESS (Optional) Java runtime options used when the "jpda start"
-rem command is executed. The default is localhost:8000.
-rem
-rem JPDA_SUSPEND (Optional) Java runtime options used when the "jpda start"
-rem command is executed. Specifies whether JVM should suspend
-rem execution immediately after startup. Default is "n".
-rem
-rem JPDA_OPTS (Optional) Java runtime options used when the "jpda start"
-rem command is executed. If used, JPDA_TRANSPORT, JPDA_ADDRESS,
-rem and JPDA_SUSPEND are ignored. Thus, all required jpda
-rem options MUST be specified. The default is:
-rem
-rem -agentlib:jdwp=transport=%JPDA_TRANSPORT%,
-rem address=%JPDA_ADDRESS%,server=y,suspend=%JPDA_SUSPEND%
-rem
-rem JSSE_OPTS (Optional) Java runtime options used to control the TLS
-rem implementation when JSSE is used. Default is:
-rem "-Djdk.tls.ephemeralDHKeySize=2048"
-rem
-rem LOGGING_CONFIG (Optional) Override Tomcat's logging config file
-rem Example (all one line)
-rem set LOGGING_CONFIG="-Djava.util.logging.config.file=%CATALINA_BASE%\conf\logging.properties"
-rem
-rem LOGGING_MANAGER (Optional) Override Tomcat's logging manager
-rem Example (all one line)
-rem set LOGGING_MANAGER="-Djava.util.logging.manager=org.apache.juli.ClassLoaderLogManager"
-rem
-rem TITLE (Optional) Specify the title of Tomcat window. The default
-rem TITLE is Tomcat if it's not specified.
-rem Example (all one line)
-rem set TITLE=Tomcat.Cluster#1.Server#1 [%DATE% %TIME%]
-rem ---------------------------------------------------------------------------
-
-setlocal
-
-rem Suppress Terminate batch job on CTRL+C
-if not ""%1"" == ""run"" goto mainEntry
-if "%TEMP%" == "" goto mainEntry
-if exist "%TEMP%\%~nx0.run" goto mainEntry
-echo Y>"%TEMP%\%~nx0.run"
-if not exist "%TEMP%\%~nx0.run" goto mainEntry
-echo Y>"%TEMP%\%~nx0.Y"
-call "%~f0" %* <"%TEMP%\%~nx0.Y"
-rem Use provided errorlevel
-set RETVAL=%ERRORLEVEL%
-del /Q "%TEMP%\%~nx0.Y" >NUL 2>&1
-exit /B %RETVAL%
-:mainEntry
-del /Q "%TEMP%\%~nx0.run" >NUL 2>&1
-
-rem Guess CATALINA_HOME if not defined
-set "CURRENT_DIR=%cd%"
-if not "%CATALINA_HOME%" == "" goto gotHome
-set "CATALINA_HOME=%CURRENT_DIR%"
-if exist "%CATALINA_HOME%\bin\catalina.bat" goto okHome
-cd ..
-set "CATALINA_HOME=%cd%"
-cd "%CURRENT_DIR%"
-:gotHome
-
-if exist "%CATALINA_HOME%\bin\catalina.bat" goto okHome
-echo The CATALINA_HOME environment variable is not defined correctly
-echo This environment variable is needed to run this program
-goto end
-:okHome
-
-rem Copy CATALINA_BASE from CATALINA_HOME if not defined
-if not "%CATALINA_BASE%" == "" goto gotBase
-set "CATALINA_BASE=%CATALINA_HOME%"
-:gotBase
-
-rem Ensure that neither CATALINA_HOME nor CATALINA_BASE contains a semi-colon
-rem as this is used as the separator in the classpath and Java provides no
-rem mechanism for escaping if the same character appears in the path. Check this
-rem by replacing all occurrences of ';' with '' and checking that neither
-rem CATALINA_HOME nor CATALINA_BASE have changed
-if "%CATALINA_HOME%" == "%CATALINA_HOME:;=%" goto homeNoSemicolon
-echo Using CATALINA_HOME: "%CATALINA_HOME%"
-echo Unable to start as CATALINA_HOME contains a semicolon (;) character
-goto end
-:homeNoSemicolon
-
-if "%CATALINA_BASE%" == "%CATALINA_BASE:;=%" goto baseNoSemicolon
-echo Using CATALINA_BASE: "%CATALINA_BASE%"
-echo Unable to start as CATALINA_BASE contains a semicolon (;) character
-goto end
-:baseNoSemicolon
-
-rem Ensure that any user defined CLASSPATH variables are not used on startup,
-rem but allow them to be specified in setenv.bat, in rare case when it is needed.
-set CLASSPATH=
-
-rem Get standard environment variables
-if not exist "%CATALINA_BASE%\bin\setenv.bat" goto checkSetenvHome
-call "%CATALINA_BASE%\bin\setenv.bat"
-goto setenvDone
-:checkSetenvHome
-if exist "%CATALINA_HOME%\bin\setenv.bat" call "%CATALINA_HOME%\bin\setenv.bat"
-:setenvDone
-
-rem Get standard Java environment variables
-if exist "%CATALINA_HOME%\bin\setclasspath.bat" goto okSetclasspath
-echo Cannot find "%CATALINA_HOME%\bin\setclasspath.bat"
-echo This file is needed to run this program
-goto end
-:okSetclasspath
-call "%CATALINA_HOME%\bin\setclasspath.bat" %1
-if errorlevel 1 goto end
-
-rem Add on extra jar file to CLASSPATH
-rem Note that there are no quotes as we do not want to introduce random
-rem quotes into the CLASSPATH
-if "%CLASSPATH%" == "" goto emptyClasspath
-set "CLASSPATH=%CLASSPATH%;"
-:emptyClasspath
-set "CLASSPATH=%CLASSPATH%%CATALINA_HOME%\bin\bootstrap.jar"
-
-if not "%CATALINA_TMPDIR%" == "" goto gotTmpdir
-set "CATALINA_TMPDIR=%CATALINA_BASE%\temp"
-:gotTmpdir
-
-rem Add tomcat-juli.jar to classpath
-rem tomcat-juli.jar can be over-ridden per instance
-if not exist "%CATALINA_BASE%\bin\tomcat-juli.jar" goto juliClasspathHome
-set "CLASSPATH=%CLASSPATH%;%CATALINA_BASE%\bin\tomcat-juli.jar"
-goto juliClasspathDone
-:juliClasspathHome
-set "CLASSPATH=%CLASSPATH%;%CATALINA_HOME%\bin\tomcat-juli.jar"
-:juliClasspathDone
-
-if not "%JSSE_OPTS%" == "" goto gotJsseOpts
-set JSSE_OPTS="-Djdk.tls.ephemeralDHKeySize=2048"
-:gotJsseOpts
-set "JAVA_OPTS=%JAVA_OPTS% %JSSE_OPTS%"
-
-rem Register custom URL handlers
-rem Do this here so custom URL handles (specifically 'war:...') can be used in the security policy
-set "JAVA_OPTS=%JAVA_OPTS% -Djava.protocol.handler.pkgs=org.apache.catalina.webresources"
-
-if not "%LOGGING_CONFIG%" == "" goto noJuliConfig
-set LOGGING_CONFIG=-Dnop
-if not exist "%CATALINA_BASE%\conf\logging.properties" goto noJuliConfig
-set LOGGING_CONFIG=-Djava.util.logging.config.file="%CATALINA_BASE%\conf\logging.properties"
-:noJuliConfig
-set "JAVA_OPTS=%JAVA_OPTS% %LOGGING_CONFIG%"
-JAVA_OPTS="-server -Xms128m -Xmx128m"
-
-if not "%LOGGING_MANAGER%" == "" goto noJuliManager
-set LOGGING_MANAGER=-Djava.util.logging.manager=org.apache.juli.ClassLoaderLogManager
-:noJuliManager
-set "JAVA_OPTS=%JAVA_OPTS% %LOGGING_MANAGER%"
-
-rem ----- Execute The Requested Command ---------------------------------------
-
-echo Using CATALINA_BASE: "%CATALINA_BASE%"
-echo Using CATALINA_HOME: "%CATALINA_HOME%"
-echo Using CATALINA_TMPDIR: "%CATALINA_TMPDIR%"
-if ""%1"" == ""debug"" goto use_jdk
-echo Using JRE_HOME: "%JRE_HOME%"
-goto java_dir_displayed
-:use_jdk
-echo Using JAVA_HOME: "%JAVA_HOME%"
-:java_dir_displayed
-echo Using CLASSPATH: "%CLASSPATH%"
-
-set _EXECJAVA=%_RUNJAVA%
-set MAINCLASS=org.apache.catalina.startup.Bootstrap
-set ACTION=start
-set SECURITY_POLICY_FILE=
-set DEBUG_OPTS=
-set JPDA=
-
-if not ""%1"" == ""jpda"" goto noJpda
-set JPDA=jpda
-if not "%JPDA_TRANSPORT%" == "" goto gotJpdaTransport
-set JPDA_TRANSPORT=dt_socket
-:gotJpdaTransport
-if not "%JPDA_ADDRESS%" == "" goto gotJpdaAddress
-set JPDA_ADDRESS=localhost:8000
-:gotJpdaAddress
-if not "%JPDA_SUSPEND%" == "" goto gotJpdaSuspend
-set JPDA_SUSPEND=n
-:gotJpdaSuspend
-if not "%JPDA_OPTS%" == "" goto gotJpdaOpts
-set JPDA_OPTS=-agentlib:jdwp=transport=%JPDA_TRANSPORT%,address=%JPDA_ADDRESS%,server=y,suspend=%JPDA_SUSPEND%
-:gotJpdaOpts
-shift
-:noJpda
-
-if ""%1"" == ""debug"" goto doDebug
-if ""%1"" == ""run"" goto doRun
-if ""%1"" == ""start"" goto doStart
-if ""%1"" == ""stop"" goto doStop
-if ""%1"" == ""configtest"" goto doConfigTest
-if ""%1"" == ""version"" goto doVersion
-
-echo Usage: catalina ( commands ... )
-echo commands:
-echo debug Start Catalina in a debugger
-echo debug -security Debug Catalina with a security manager
-echo jpda start Start Catalina under JPDA debugger
-echo run Start Catalina in the current window
-echo run -security Start in the current window with security manager
-echo start Start Catalina in a separate window
-echo start -security Start in a separate window with security manager
-echo stop Stop Catalina
-echo configtest Run a basic syntax check on server.xml
-echo version What version of tomcat are you running?
-goto end
-
-:doDebug
-shift
-set _EXECJAVA=%_RUNJDB%
-set DEBUG_OPTS=-sourcepath "%CATALINA_HOME%\..\..\java"
-if not ""%1"" == ""-security"" goto execCmd
-shift
-echo Using Security Manager
-set "SECURITY_POLICY_FILE=%CATALINA_BASE%\conf\catalina.policy"
-goto execCmd
-
-:doRun
-shift
-if not ""%1"" == ""-security"" goto execCmd
-shift
-echo Using Security Manager
-set "SECURITY_POLICY_FILE=%CATALINA_BASE%\conf\catalina.policy"
-goto execCmd
-
-:doStart
-shift
-if "%TITLE%" == "" set TITLE=Tomcat
-set _EXECJAVA=start "%TITLE%" %_RUNJAVA%
-if not ""%1"" == ""-security"" goto execCmd
-shift
-echo Using Security Manager
-set "SECURITY_POLICY_FILE=%CATALINA_BASE%\conf\catalina.policy"
-goto execCmd
-
-:doStop
-shift
-set ACTION=stop
-set CATALINA_OPTS=
-goto execCmd
-
-:doConfigTest
-shift
-set ACTION=configtest
-set CATALINA_OPTS=
-goto execCmd
-
-:doVersion
-%_EXECJAVA% -classpath "%CATALINA_HOME%\lib\catalina.jar" org.apache.catalina.util.ServerInfo
-goto end
-
-
-:execCmd
-rem Get remaining unshifted command line arguments and save them in the
-set CMD_LINE_ARGS=
-:setArgs
-if ""%1""=="""" goto doneSetArgs
-set CMD_LINE_ARGS=%CMD_LINE_ARGS% %1
-shift
-goto setArgs
-:doneSetArgs
-
-rem Execute Java with the applicable properties
-if not "%JPDA%" == "" goto doJpda
-if not "%SECURITY_POLICY_FILE%" == "" goto doSecurity
-%_EXECJAVA% %JAVA_OPTS% %CATALINA_OPTS% %DEBUG_OPTS% -classpath "%CLASSPATH%" -Dcatalina.base="%CATALINA_BASE%" -Dcatalina.home="%CATALINA_HOME%" -Djava.io.tmpdir="%CATALINA_TMPDIR%" %MAINCLASS% %CMD_LINE_ARGS% %ACTION%
-goto end
-:doSecurity
-%_EXECJAVA% %JAVA_OPTS% %CATALINA_OPTS% %DEBUG_OPTS% -classpath "%CLASSPATH%" -Djava.security.manager -Djava.security.policy=="%SECURITY_POLICY_FILE%" -Dcatalina.base="%CATALINA_BASE%" -Dcatalina.home="%CATALINA_HOME%" -Djava.io.tmpdir="%CATALINA_TMPDIR%" %MAINCLASS% %CMD_LINE_ARGS% %ACTION%
-goto end
-:doJpda
-if not "%SECURITY_POLICY_FILE%" == "" goto doSecurityJpda
-%_EXECJAVA% %JAVA_OPTS% %JPDA_OPTS% %CATALINA_OPTS% %DEBUG_OPTS% -classpath "%CLASSPATH%" -Dcatalina.base="%CATALINA_BASE%" -Dcatalina.home="%CATALINA_HOME%" -Djava.io.tmpdir="%CATALINA_TMPDIR%" %MAINCLASS% %CMD_LINE_ARGS% %ACTION%
-goto end
-:doSecurityJpda
-%_EXECJAVA% %JAVA_OPTS% %JPDA_OPTS% %CATALINA_OPTS% %DEBUG_OPTS% -classpath "%CLASSPATH%" -Djava.security.manager -Djava.security.policy=="%SECURITY_POLICY_FILE%" -Dcatalina.base="%CATALINA_BASE%" -Dcatalina.home="%CATALINA_HOME%" -Djava.io.tmpdir="%CATALINA_TMPDIR%" %MAINCLASS% %CMD_LINE_ARGS% %ACTION%
-goto end
-
-:end
diff --git a/httpserver/src/main/assembly/tomcat/bin/catalina.sh b/httpserver/src/main/assembly/tomcat/bin/catalina.sh deleted file mode 100644 index 2cdfd32..0000000 --- a/httpserver/src/main/assembly/tomcat/bin/catalina.sh +++ /dev/null @@ -1,616 +0,0 @@ -#!/bin/sh - -# Licensed to the Apache Software Foundation (ASF) under one or more -# contributor license agreements. See the NOTICE file distributed with -# this work for additional information regarding copyright ownership. -# The ASF licenses this file to You under the Apache License, Version 2.0 -# (the "License"); you may not use this file except in compliance with -# the License. You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -# ----------------------------------------------------------------------------- -# Control Script for the CATALINA Server -# -# Environment Variable Prerequisites -# -# Do not set the variables in this script. Instead put them into a script -# setenv.sh in CATALINA_BASE/bin to keep your customizations separate. -# -# CATALINA_HOME May point at your Catalina "build" directory. -# -# CATALINA_BASE (Optional) Base directory for resolving dynamic portions -# of a Catalina installation. If not present, resolves to -# the same directory that CATALINA_HOME points to. -# -# CATALINA_OUT (Optional) Full path to a file where stdout and stderr -# will be redirected. -# Default is $CATALINA_BASE/logs/catalina.out -# -# CATALINA_OPTS (Optional) Java runtime options used when the "start", -# "run" or "debug" command is executed. -# Include here and not in JAVA_OPTS all options, that should -# only be used by Tomcat itself, not by the stop process, -# the version command etc. -# Examples are heap size, GC logging, JMX ports etc. -# -# CATALINA_TMPDIR (Optional) Directory path location of temporary directory -# the JVM should use (java.io.tmpdir). Defaults to -# $CATALINA_BASE/temp. -# -# JAVA_HOME Must point at your Java Development Kit installation. -# Required to run the with the "debug" argument. -# -# JRE_HOME Must point at your Java Runtime installation. -# Defaults to JAVA_HOME if empty. If JRE_HOME and JAVA_HOME -# are both set, JRE_HOME is used. -# -# JAVA_OPTS (Optional) Java runtime options used when any command -# is executed. -# Include here and not in CATALINA_OPTS all options, that -# should be used by Tomcat and also by the stop process, -# the version command etc. -# Most options should go into CATALINA_OPTS. -# -# JPDA_TRANSPORT (Optional) JPDA transport used when the "jpda start" -# command is executed. The default is "dt_socket". -# -# JPDA_ADDRESS (Optional) Java runtime options used when the "jpda start" -# command is executed. The default is localhost:8000. -# -# JPDA_SUSPEND (Optional) Java runtime options used when the "jpda start" -# command is executed. Specifies whether JVM should suspend -# execution immediately after startup. Default is "n". -# -# JPDA_OPTS (Optional) Java runtime options used when the "jpda start" -# command is executed. If used, JPDA_TRANSPORT, JPDA_ADDRESS, -# and JPDA_SUSPEND are ignored. Thus, all required jpda -# options MUST be specified. The default is: -# -# -agentlib:jdwp=transport=$JPDA_TRANSPORT, -# address=$JPDA_ADDRESS,server=y,suspend=$JPDA_SUSPEND -# -# JSSE_OPTS (Optional) Java runtime options used to control the TLS -# implementation when JSSE is used. Default is: -# "-Djdk.tls.ephemeralDHKeySize=2048" -# -# CATALINA_PID (Optional) Path of the file which should contains the pid -# of the catalina startup java process, when start (fork) is -# used -# -# LOGGING_CONFIG (Optional) Override Tomcat's logging config file -# Example (all one line) -# LOGGING_CONFIG="-Djava.util.logging.config.file=$CATALINA_BASE/conf/logging.properties" -# -# LOGGING_MANAGER (Optional) Override Tomcat's logging manager -# Example (all one line) -# LOGGING_MANAGER="-Djava.util.logging.manager=org.apache.juli.ClassLoaderLogManager" -# -# UMASK (Optional) Override Tomcat's default UMASK of 0027 -# -# USE_NOHUP (Optional) If set to the string true the start command will -# use nohup so that the Tomcat process will ignore any hangup -# signals. Default is "false" unless running on HP-UX in which -# case the default is "true" -# ----------------------------------------------------------------------------- - -# OS specific support. $var _must_ be set to either true or false. -JAVA_OPTS="-server -Xms128m -Xmx128m" -cygwin=false -darwin=false -os400=false -hpux=false -case "`uname`" in -CYGWIN*) cygwin=true;; -Darwin*) darwin=true;; -OS400*) os400=true;; -HP-UX*) hpux=true;; -esac - -# resolve links - $0 may be a softlink -PRG="$0" - -while [ -h "$PRG" ]; do - ls=`ls -ld "$PRG"` - link=`expr "$ls" : '.*-> \(.*\)$'` - if expr "$link" : '/.*' > /dev/null; then - PRG="$link" - else - PRG=`dirname "$PRG"`/"$link" - fi -done - -# Get standard environment variables -PRGDIR=`dirname "$PRG"` - -# Only set CATALINA_HOME if not already set -[ -z "$CATALINA_HOME" ] && CATALINA_HOME=`cd "$PRGDIR/.." >/dev/null; pwd` - -# Copy CATALINA_BASE from CATALINA_HOME if not already set -[ -z "$CATALINA_BASE" ] && CATALINA_BASE="$CATALINA_HOME" - -# Ensure that any user defined CLASSPATH variables are not used on startup, -# but allow them to be specified in setenv.sh, in rare case when it is needed. -CLASSPATH= - -if [ -r "$CATALINA_BASE/bin/setenv.sh" ]; then - . "$CATALINA_BASE/bin/setenv.sh" -elif [ -r "$CATALINA_HOME/bin/setenv.sh" ]; then - . "$CATALINA_HOME/bin/setenv.sh" -fi - -# For Cygwin, ensure paths are in UNIX format before anything is touched -if $cygwin; then - [ -n "$JAVA_HOME" ] && JAVA_HOME=`cygpath --unix "$JAVA_HOME"` - [ -n "$JRE_HOME" ] && JRE_HOME=`cygpath --unix "$JRE_HOME"` - [ -n "$CATALINA_HOME" ] && CATALINA_HOME=`cygpath --unix "$CATALINA_HOME"` - [ -n "$CATALINA_BASE" ] && CATALINA_BASE=`cygpath --unix "$CATALINA_BASE"` - [ -n "$CLASSPATH" ] && CLASSPATH=`cygpath --path --unix "$CLASSPATH"` -fi - -# Ensure that neither CATALINA_HOME nor CATALINA_BASE contains a colon -# as this is used as the separator in the classpath and Java provides no -# mechanism for escaping if the same character appears in the path. -case $CATALINA_HOME in - *:*) echo "Using CATALINA_HOME: $CATALINA_HOME"; - echo "Unable to start as CATALINA_HOME contains a colon (:) character"; - exit 1; -esac -case $CATALINA_BASE in - *:*) echo "Using CATALINA_BASE: $CATALINA_BASE"; - echo "Unable to start as CATALINA_BASE contains a colon (:) character"; - exit 1; -esac - -# For OS400 -if $os400; then - # Set job priority to standard for interactive (interactive - 6) by using - # the interactive priority - 6, the helper threads that respond to requests - # will be running at the same priority as interactive jobs. - COMMAND='chgjob job('$JOBNAME') runpty(6)' - system $COMMAND - - # Enable multi threading - export QIBM_MULTI_THREADED=Y -fi - -# Get standard Java environment variables -if $os400; then - # -r will Only work on the os400 if the files are: - # 1. owned by the user - # 2. owned by the PRIMARY group of the user - # this will not work if the user belongs in secondary groups - . "$CATALINA_HOME"/bin/setclasspath.sh -else - if [ -r "$CATALINA_HOME"/bin/setclasspath.sh ]; then - . "$CATALINA_HOME"/bin/setclasspath.sh - else - echo "Cannot find $CATALINA_HOME/bin/setclasspath.sh" - echo "This file is needed to run this program" - exit 1 - fi -fi - -# Add on extra jar files to CLASSPATH -if [ ! -z "$CLASSPATH" ] ; then - CLASSPATH="$CLASSPATH": -fi -CLASSPATH="$CLASSPATH""$CATALINA_HOME"/bin/bootstrap.jar - -if [ -z "$CATALINA_OUT" ] ; then - CATALINA_OUT="$CATALINA_BASE"/logs/catalina.out -fi - -if [ -z "$CATALINA_TMPDIR" ] ; then - # Define the java.io.tmpdir to use for Catalina - CATALINA_TMPDIR="$CATALINA_BASE"/temp -fi - -# Add tomcat-juli.jar to classpath -# tomcat-juli.jar can be over-ridden per instance -if [ -r "$CATALINA_BASE/bin/tomcat-juli.jar" ] ; then - CLASSPATH=$CLASSPATH:$CATALINA_BASE/bin/tomcat-juli.jar -else - CLASSPATH=$CLASSPATH:$CATALINA_HOME/bin/tomcat-juli.jar -fi - -# Bugzilla 37848: When no TTY is available, don't output to console -have_tty=0 -if [ "`tty`" != "not a tty" ]; then - have_tty=1 -fi - -# For Cygwin, switch paths to Windows format before running java -if $cygwin; then - JAVA_HOME=`cygpath --absolute --windows "$JAVA_HOME"` - JRE_HOME=`cygpath --absolute --windows "$JRE_HOME"` - CATALINA_HOME=`cygpath --absolute --windows "$CATALINA_HOME"` - CATALINA_BASE=`cygpath --absolute --windows "$CATALINA_BASE"` - CATALINA_TMPDIR=`cygpath --absolute --windows "$CATALINA_TMPDIR"` - CLASSPATH=`cygpath --path --windows "$CLASSPATH"` -fi - -if [ -z "$JSSE_OPTS" ] ; then - JSSE_OPTS="-Djdk.tls.ephemeralDHKeySize=2048" -fi -JAVA_OPTS="$JAVA_OPTS $JSSE_OPTS" - -# Register custom URL handlers -# Do this here so custom URL handles (specifically 'war:...') can be used in the security policy -JAVA_OPTS="$JAVA_OPTS -Djava.protocol.handler.pkgs=org.apache.catalina.webresources" - -# Set juli LogManager config file if it is present and an override has not been issued -if [ -z "$LOGGING_CONFIG" ]; then - if [ -r "$CATALINA_BASE"/conf/logging.properties ]; then - LOGGING_CONFIG="-Djava.util.logging.config.file=$CATALINA_BASE/conf/logging.properties" - else - # Bugzilla 45585 - LOGGING_CONFIG="-Dnop" - fi -fi - -if [ -z "$LOGGING_MANAGER" ]; then - LOGGING_MANAGER="-Djava.util.logging.manager=org.apache.juli.ClassLoaderLogManager" -fi - -# Set UMASK unless it has been overridden -if [ -z "$UMASK" ]; then - UMASK="0027" -fi -umask $UMASK - -# Uncomment the following line to make the umask available when using the -# org.apache.catalina.security.SecurityListener -#JAVA_OPTS="$JAVA_OPTS -Dorg.apache.catalina.security.SecurityListener.UMASK=`umask`" - -if [ -z "$USE_NOHUP" ]; then - if $hpux; then - USE_NOHUP="true" - else - USE_NOHUP="false" - fi -fi -unset _NOHUP -if [ "$USE_NOHUP" = "true" ]; then - _NOHUP=nohup -fi - -# ----- Execute The Requested Command ----------------------------------------- - -# Bugzilla 37848: only output this if we have a TTY -if [ $have_tty -eq 1 ]; then - echo "Using CATALINA_BASE: $CATALINA_BASE" - echo "Using CATALINA_HOME: $CATALINA_HOME" - echo "Using CATALINA_TMPDIR: $CATALINA_TMPDIR" - if [ "$1" = "debug" ] ; then - echo "Using JAVA_HOME: $JAVA_HOME" - else - echo "Using JRE_HOME: $JRE_HOME" - fi - echo "Using CLASSPATH: $CLASSPATH" - if [ ! -z "$CATALINA_PID" ]; then - echo "Using CATALINA_PID: $CATALINA_PID" - fi -fi - -if [ "$1" = "jpda" ] ; then - if [ -z "$JPDA_TRANSPORT" ]; then - JPDA_TRANSPORT="dt_socket" - fi - if [ -z "$JPDA_ADDRESS" ]; then - JPDA_ADDRESS="localhost:8000" - fi - if [ -z "$JPDA_SUSPEND" ]; then - JPDA_SUSPEND="n" - fi - if [ -z "$JPDA_OPTS" ]; then - JPDA_OPTS="-agentlib:jdwp=transport=$JPDA_TRANSPORT,address=$JPDA_ADDRESS,server=y,suspend=$JPDA_SUSPEND" - fi - CATALINA_OPTS="$JPDA_OPTS $CATALINA_OPTS" - shift -fi - -if [ "$1" = "debug" ] ; then - if $os400; then - echo "Debug command not available on OS400" - exit 1 - else - shift - if [ "$1" = "-security" ] ; then - if [ $have_tty -eq 1 ]; then - echo "Using Security Manager" - fi - shift - exec "$_RUNJDB" "$LOGGING_CONFIG" $LOGGING_MANAGER $JAVA_OPTS $CATALINA_OPTS \ - -classpath "$CLASSPATH" \ - -sourcepath "$CATALINA_HOME"/../../java \ - -Djava.security.manager \ - -Djava.security.policy=="$CATALINA_BASE"/conf/catalina.policy \ - -Dcatalina.base="$CATALINA_BASE" \ - -Dcatalina.home="$CATALINA_HOME" \ - -Djava.io.tmpdir="$CATALINA_TMPDIR" \ - org.apache.catalina.startup.Bootstrap "$@" start - else - exec "$_RUNJDB" "$LOGGING_CONFIG" $LOGGING_MANAGER $JAVA_OPTS $CATALINA_OPTS \ - -classpath "$CLASSPATH" \ - -sourcepath "$CATALINA_HOME"/../../java \ - -Dcatalina.base="$CATALINA_BASE" \ - -Dcatalina.home="$CATALINA_HOME" \ - -Djava.io.tmpdir="$CATALINA_TMPDIR" \ - org.apache.catalina.startup.Bootstrap "$@" start - fi - fi - -elif [ "$1" = "run" ]; then - - shift - if [ "$1" = "-security" ] ; then - if [ $have_tty -eq 1 ]; then - echo "Using Security Manager" - fi - shift - eval exec "\"$_RUNJAVA\"" "\"$LOGGING_CONFIG\"" $LOGGING_MANAGER $JAVA_OPTS $CATALINA_OPTS \ - -classpath "\"$CLASSPATH\"" \ - -Djava.security.manager \ - -Djava.security.policy=="\"$CATALINA_BASE/conf/catalina.policy\"" \ - -Dcatalina.base="\"$CATALINA_BASE\"" \ - -Dcatalina.home="\"$CATALINA_HOME\"" \ - -Djava.io.tmpdir="\"$CATALINA_TMPDIR\"" \ - org.apache.catalina.startup.Bootstrap "$@" start - else - eval exec "\"$_RUNJAVA\"" "\"$LOGGING_CONFIG\"" $LOGGING_MANAGER $JAVA_OPTS $CATALINA_OPTS \ - -classpath "\"$CLASSPATH\"" \ - -Dcatalina.base="\"$CATALINA_BASE\"" \ - -Dcatalina.home="\"$CATALINA_HOME\"" \ - -Djava.io.tmpdir="\"$CATALINA_TMPDIR\"" \ - org.apache.catalina.startup.Bootstrap "$@" start - fi - -elif [ "$1" = "start" ] ; then - - if [ ! -z "$CATALINA_PID" ]; then - if [ -f "$CATALINA_PID" ]; then - if [ -s "$CATALINA_PID" ]; then - echo "Existing PID file found during start." - if [ -r "$CATALINA_PID" ]; then - PID=`cat "$CATALINA_PID"` - ps -p $PID >/dev/null 2>&1 - if [ $? -eq 0 ] ; then - echo "Tomcat appears to still be running with PID $PID. Start aborted." - echo "If the following process is not a Tomcat process, remove the PID file and try again:" - ps -f -p $PID - exit 1 - else - echo "Removing/clearing stale PID file." - rm -f "$CATALINA_PID" >/dev/null 2>&1 - if [ $? != 0 ]; then - if [ -w "$CATALINA_PID" ]; then - cat /dev/null > "$CATALINA_PID" - else - echo "Unable to remove or clear stale PID file. Start aborted." - exit 1 - fi - fi - fi - else - echo "Unable to read PID file. Start aborted." - exit 1 - fi - else - rm -f "$CATALINA_PID" >/dev/null 2>&1 - if [ $? != 0 ]; then - if [ ! -w "$CATALINA_PID" ]; then - echo "Unable to remove or write to empty PID file. Start aborted." - exit 1 - fi - fi - fi - fi - fi - - shift - touch "$CATALINA_OUT" - if [ "$1" = "-security" ] ; then - if [ $have_tty -eq 1 ]; then - echo "Using Security Manager" - fi - shift - eval $_NOHUP "\"$_RUNJAVA\"" "\"$LOGGING_CONFIG\"" $LOGGING_MANAGER $JAVA_OPTS $CATALINA_OPTS \ - -classpath "\"$CLASSPATH\"" \ - -Djava.security.manager \ - -Djava.security.policy=="\"$CATALINA_BASE/conf/catalina.policy\"" \ - -Dcatalina.base="\"$CATALINA_BASE\"" \ - -Dcatalina.home="\"$CATALINA_HOME\"" \ - -Djava.io.tmpdir="\"$CATALINA_TMPDIR\"" \ - org.apache.catalina.startup.Bootstrap "$@" start \ - >> "$CATALINA_OUT" 2>&1 "&" - - else - eval $_NOHUP "\"$_RUNJAVA\"" "\"$LOGGING_CONFIG\"" $LOGGING_MANAGER $JAVA_OPTS $CATALINA_OPTS \ - -classpath "\"$CLASSPATH\"" \ - -Dcatalina.base="\"$CATALINA_BASE\"" \ - -Dcatalina.home="\"$CATALINA_HOME\"" \ - -Djava.io.tmpdir="\"$CATALINA_TMPDIR\"" \ - org.apache.catalina.startup.Bootstrap "$@" start \ - >> "$CATALINA_OUT" 2>&1 "&" - - fi - - if [ ! -z "$CATALINA_PID" ]; then - echo $! > "$CATALINA_PID" - fi - - echo "Tomcat started." - -elif [ "$1" = "stop" ] ; then - - shift - - SLEEP=5 - if [ ! -z "$1" ]; then - echo $1 | grep "[^0-9]" >/dev/null 2>&1 - if [ $? -gt 0 ]; then - SLEEP=$1 - shift - fi - fi - - FORCE=0 - if [ "$1" = "-force" ]; then - shift - FORCE=1 - fi - - if [ ! -z "$CATALINA_PID" ]; then - if [ -f "$CATALINA_PID" ]; then - if [ -s "$CATALINA_PID" ]; then - kill -0 `cat "$CATALINA_PID"` >/dev/null 2>&1 - if [ $? -gt 0 ]; then - echo "PID file found but no matching process was found. Stop aborted." - exit 1 - fi - else - echo "PID file is empty and has been ignored." - fi - else - echo "\$CATALINA_PID was set but the specified file does not exist. Is Tomcat running? Stop aborted." - exit 1 - fi - fi - - eval "\"$_RUNJAVA\"" $JAVA_OPTS \ - -classpath "\"$CLASSPATH\"" \ - -Dcatalina.base="\"$CATALINA_BASE\"" \ - -Dcatalina.home="\"$CATALINA_HOME\"" \ - -Djava.io.tmpdir="\"$CATALINA_TMPDIR\"" \ - org.apache.catalina.startup.Bootstrap "$@" stop - - # stop failed. Shutdown port disabled? Try a normal kill. - if [ $? != 0 ]; then - if [ ! -z "$CATALINA_PID" ]; then - echo "The stop command failed. Attempting to signal the process to stop through OS signal." - kill -15 `cat "$CATALINA_PID"` >/dev/null 2>&1 - fi - fi - - if [ ! -z "$CATALINA_PID" ]; then - if [ -f "$CATALINA_PID" ]; then - while [ $SLEEP -ge 0 ]; do - kill -0 `cat "$CATALINA_PID"` >/dev/null 2>&1 - if [ $? -gt 0 ]; then - rm -f "$CATALINA_PID" >/dev/null 2>&1 - if [ $? != 0 ]; then - if [ -w "$CATALINA_PID" ]; then - cat /dev/null > "$CATALINA_PID" - # If Tomcat has stopped don't try and force a stop with an empty PID file - FORCE=0 - else - echo "The PID file could not be removed or cleared." - fi - fi - echo "Tomcat stopped." - break - fi - if [ $SLEEP -gt 0 ]; then - sleep 1 - fi - if [ $SLEEP -eq 0 ]; then - echo "Tomcat did not stop in time." - if [ $FORCE -eq 0 ]; then - echo "PID file was not removed." - fi - echo "To aid diagnostics a thread dump has been written to standard out." - kill -3 `cat "$CATALINA_PID"` - fi - SLEEP=`expr $SLEEP - 1 ` - done - fi - fi - - KILL_SLEEP_INTERVAL=5 - if [ $FORCE -eq 1 ]; then - if [ -z "$CATALINA_PID" ]; then - echo "Kill failed: \$CATALINA_PID not set" - else - if [ -f "$CATALINA_PID" ]; then - PID=`cat "$CATALINA_PID"` - echo "Killing Tomcat with the PID: $PID" - kill -9 $PID - while [ $KILL_SLEEP_INTERVAL -ge 0 ]; do - kill -0 `cat "$CATALINA_PID"` >/dev/null 2>&1 - if [ $? -gt 0 ]; then - rm -f "$CATALINA_PID" >/dev/null 2>&1 - if [ $? != 0 ]; then - if [ -w "$CATALINA_PID" ]; then - cat /dev/null > "$CATALINA_PID" - else - echo "The PID file could not be removed." - fi - fi - echo "The Tomcat process has been killed." - break - fi - if [ $KILL_SLEEP_INTERVAL -gt 0 ]; then - sleep 1 - fi - KILL_SLEEP_INTERVAL=`expr $KILL_SLEEP_INTERVAL - 1 ` - done - if [ $KILL_SLEEP_INTERVAL -lt 0 ]; then - echo "Tomcat has not been killed completely yet. The process might be waiting on some system call or might be UNINTERRUPTIBLE." - fi - fi - fi - fi - -elif [ "$1" = "configtest" ] ; then - - eval "\"$_RUNJAVA\"" $LOGGING_MANAGER $JAVA_OPTS \ - -classpath "\"$CLASSPATH\"" \ - -Dcatalina.base="\"$CATALINA_BASE\"" \ - -Dcatalina.home="\"$CATALINA_HOME\"" \ - -Djava.io.tmpdir="\"$CATALINA_TMPDIR\"" \ - org.apache.catalina.startup.Bootstrap configtest - result=$? - if [ $result -ne 0 ]; then - echo "Configuration error detected!" - fi - exit $result - -elif [ "$1" = "version" ] ; then - - "$_RUNJAVA" \ - -classpath "$CATALINA_HOME/lib/catalina.jar" \ - org.apache.catalina.util.ServerInfo - -else - - echo "Usage: catalina.sh ( commands ... )" - echo "commands:" - if $os400; then - echo " debug Start Catalina in a debugger (not available on OS400)" - echo " debug -security Debug Catalina with a security manager (not available on OS400)" - else - echo " debug Start Catalina in a debugger" - echo " debug -security Debug Catalina with a security manager" - fi - echo " jpda start Start Catalina under JPDA debugger" - echo " run Start Catalina in the current window" - echo " run -security Start in the current window with security manager" - echo " start Start Catalina in a separate window" - echo " start -security Start in a separate window with security manager" - echo " stop Stop Catalina, waiting up to 5 seconds for the process to end" - echo " stop n Stop Catalina, waiting up to n seconds for the process to end" - echo " stop -force Stop Catalina, wait up to 5 seconds and then use kill -KILL if still running" - echo " stop n -force Stop Catalina, wait up to n seconds and then use kill -KILL if still running" - echo " configtest Run a basic syntax check on server.xml - check exit code for result" - echo " version What version of tomcat are you running?" - echo "Note: Waiting for the process to end and use of the -force option require that \$CATALINA_PID is defined" - exit 1 - -fi |