Add tomcat server to esr-server.

Change-Id: Id6148623e7d15fef60648fe51124d65f58978167
Issue-ID: AAI-291
Signed-off-by: lizi00164331 <li.zi30@zte.com.cn>

2 files changed, 966 insertions, 0 deletions

diff --git a/httpserver/src/main/assembly/tomcat/bin/catalina.bat b/httpserver/src/main/assembly/tomcat/bin/catalina.bat
new file mode 100644
index 0000000..49864c5
--- /dev/null
+++ b/httpserver/src/main/assembly/tomcat/bin/catalina.bat
@@ -0,0 +1,350 @@
+@echo off

+rem Licensed to the Apache Software Foundation (ASF) under one or more

+rem contributor license agreements.  See the NOTICE file distributed with

+rem this work for additional information regarding copyright ownership.

+rem The ASF licenses this file to You under the Apache License, Version 2.0

+rem (the "License"); you may not use this file except in compliance with

+rem the License.  You may obtain a copy of the License at

+rem

+rem     http://www.apache.org/licenses/LICENSE-2.0

+rem

+rem Unless required by applicable law or agreed to in writing, software

+rem distributed under the License is distributed on an "AS IS" BASIS,

+rem WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

+rem See the License for the specific language governing permissions and

+rem limitations under the License.

+

+rem ---------------------------------------------------------------------------

+rem Start/Stop Script for the CATALINA Server

+rem

+rem Environment Variable Prerequisites

+rem

+rem   Do not set the variables in this script. Instead put them into a script

+rem   setenv.bat in CATALINA_BASE/bin to keep your customizations separate.

+rem

+rem   WHEN RUNNING TOMCAT AS A WINDOWS SERVICE:

+rem   Note that the environment variables that affect the behavior of this

+rem   script will have no effect at all on Windows Services. As such, any

+rem   local customizations made in a CATALINA_BASE/bin/setenv.bat script

+rem   will also have no effect on Tomcat when launched as a Windows Service.

+rem   The configuration that controls Windows Services is stored in the Windows

+rem   Registry, and is most conveniently maintained using the "tomcatXw.exe"

+rem   maintenance utility, where "X" is the major version of Tomcat you are

+rem   running.

+rem

+rem   CATALINA_HOME   May point at your Catalina "build" directory.

+rem

+rem   CATALINA_BASE   (Optional) Base directory for resolving dynamic portions

+rem                   of a Catalina installation.  If not present, resolves to

+rem                   the same directory that CATALINA_HOME points to.

+rem

+rem   CATALINA_OPTS   (Optional) Java runtime options used when the "start",

+rem                   "run" or "debug" command is executed.

+rem                   Include here and not in JAVA_OPTS all options, that should

+rem                   only be used by Tomcat itself, not by the stop process,

+rem                   the version command etc.

+rem                   Examples are heap size, GC logging, JMX ports etc.

+rem

+rem   CATALINA_TMPDIR (Optional) Directory path location of temporary directory

+rem                   the JVM should use (java.io.tmpdir).  Defaults to

+rem                   %CATALINA_BASE%\temp.

+rem

+rem   JAVA_HOME       Must point at your Java Development Kit installation.

+rem                   Required to run the with the "debug" argument.

+rem

+rem   JRE_HOME        Must point at your Java Runtime installation.

+rem                   Defaults to JAVA_HOME if empty. If JRE_HOME and JAVA_HOME

+rem                   are both set, JRE_HOME is used.

+rem

+rem   JAVA_OPTS       (Optional) Java runtime options used when any command

+rem                   is executed.

+rem                   Include here and not in CATALINA_OPTS all options, that

+rem                   should be used by Tomcat and also by the stop process,

+rem                   the version command etc.

+rem                   Most options should go into CATALINA_OPTS.

+rem

+rem   JPDA_TRANSPORT  (Optional) JPDA transport used when the "jpda start"

+rem                   command is executed. The default is "dt_socket".

+rem

+rem   JPDA_ADDRESS    (Optional) Java runtime options used when the "jpda start"

+rem                   command is executed. The default is localhost:8000.

+rem

+rem   JPDA_SUSPEND    (Optional) Java runtime options used when the "jpda start"

+rem                   command is executed. Specifies whether JVM should suspend

+rem                   execution immediately after startup. Default is "n".

+rem

+rem   JPDA_OPTS       (Optional) Java runtime options used when the "jpda start"

+rem                   command is executed. If used, JPDA_TRANSPORT, JPDA_ADDRESS,

+rem                   and JPDA_SUSPEND are ignored. Thus, all required jpda

+rem                   options MUST be specified. The default is:

+rem

+rem                   -agentlib:jdwp=transport=%JPDA_TRANSPORT%,

+rem                       address=%JPDA_ADDRESS%,server=y,suspend=%JPDA_SUSPEND%

+rem

+rem   JSSE_OPTS       (Optional) Java runtime options used to control the TLS

+rem                   implementation when JSSE is used. Default is:

+rem                   "-Djdk.tls.ephemeralDHKeySize=2048"

+rem

+rem   LOGGING_CONFIG  (Optional) Override Tomcat's logging config file

+rem                   Example (all one line)

+rem                   set LOGGING_CONFIG="-Djava.util.logging.config.file=%CATALINA_BASE%\conf\logging.properties"

+rem

+rem   LOGGING_MANAGER (Optional) Override Tomcat's logging manager

+rem                   Example (all one line)

+rem                   set LOGGING_MANAGER="-Djava.util.logging.manager=org.apache.juli.ClassLoaderLogManager"

+rem

+rem   TITLE           (Optional) Specify the title of Tomcat window. The default

+rem                   TITLE is Tomcat if it's not specified.

+rem                   Example (all one line)

+rem                   set TITLE=Tomcat.Cluster#1.Server#1 [%DATE% %TIME%]

+rem ---------------------------------------------------------------------------

+

+setlocal

+

+rem Suppress Terminate batch job on CTRL+C

+if not ""%1"" == ""run"" goto mainEntry

+if "%TEMP%" == "" goto mainEntry

+if exist "%TEMP%\%~nx0.run" goto mainEntry

+echo Y>"%TEMP%\%~nx0.run"

+if not exist "%TEMP%\%~nx0.run" goto mainEntry

+echo Y>"%TEMP%\%~nx0.Y"

+call "%~f0" %* <"%TEMP%\%~nx0.Y"

+rem Use provided errorlevel

+set RETVAL=%ERRORLEVEL%

+del /Q "%TEMP%\%~nx0.Y" >NUL 2>&1

+exit /B %RETVAL%

+:mainEntry

+del /Q "%TEMP%\%~nx0.run" >NUL 2>&1

+

+rem Guess CATALINA_HOME if not defined

+set "CURRENT_DIR=%cd%"

+if not "%CATALINA_HOME%" == "" goto gotHome

+set "CATALINA_HOME=%CURRENT_DIR%"

+if exist "%CATALINA_HOME%\bin\catalina.bat" goto okHome

+cd ..

+set "CATALINA_HOME=%cd%"

+cd "%CURRENT_DIR%"

+:gotHome

+

+if exist "%CATALINA_HOME%\bin\catalina.bat" goto okHome

+echo The CATALINA_HOME environment variable is not defined correctly

+echo This environment variable is needed to run this program

+goto end

+:okHome

+

+rem Copy CATALINA_BASE from CATALINA_HOME if not defined

+if not "%CATALINA_BASE%" == "" goto gotBase

+set "CATALINA_BASE=%CATALINA_HOME%"

+:gotBase

+

+rem Ensure that neither CATALINA_HOME nor CATALINA_BASE contains a semi-colon

+rem as this is used as the separator in the classpath and Java provides no

+rem mechanism for escaping if the same character appears in the path. Check this

+rem by replacing all occurrences of ';' with '' and checking that neither

+rem CATALINA_HOME nor CATALINA_BASE have changed

+if "%CATALINA_HOME%" == "%CATALINA_HOME:;=%" goto homeNoSemicolon

+echo Using CATALINA_HOME:   "%CATALINA_HOME%"

+echo Unable to start as CATALINA_HOME contains a semicolon (;) character

+goto end

+:homeNoSemicolon

+

+if "%CATALINA_BASE%" == "%CATALINA_BASE:;=%" goto baseNoSemicolon

+echo Using CATALINA_BASE:   "%CATALINA_BASE%"

+echo Unable to start as CATALINA_BASE contains a semicolon (;) character

+goto end

+:baseNoSemicolon

+

+rem Ensure that any user defined CLASSPATH variables are not used on startup,

+rem but allow them to be specified in setenv.bat, in rare case when it is needed.

+set CLASSPATH=

+

+rem Get standard environment variables

+if not exist "%CATALINA_BASE%\bin\setenv.bat" goto checkSetenvHome

+call "%CATALINA_BASE%\bin\setenv.bat"

+goto setenvDone

+:checkSetenvHome

+if exist "%CATALINA_HOME%\bin\setenv.bat" call "%CATALINA_HOME%\bin\setenv.bat"

+:setenvDone

+

+rem Get standard Java environment variables

+if exist "%CATALINA_HOME%\bin\setclasspath.bat" goto okSetclasspath

+echo Cannot find "%CATALINA_HOME%\bin\setclasspath.bat"

+echo This file is needed to run this program

+goto end

+:okSetclasspath

+call "%CATALINA_HOME%\bin\setclasspath.bat" %1

+if errorlevel 1 goto end

+

+rem Add on extra jar file to CLASSPATH

+rem Note that there are no quotes as we do not want to introduce random

+rem quotes into the CLASSPATH

+if "%CLASSPATH%" == "" goto emptyClasspath

+set "CLASSPATH=%CLASSPATH%;"

+:emptyClasspath

+set "CLASSPATH=%CLASSPATH%%CATALINA_HOME%\bin\bootstrap.jar"

+

+if not "%CATALINA_TMPDIR%" == "" goto gotTmpdir

+set "CATALINA_TMPDIR=%CATALINA_BASE%\temp"

+:gotTmpdir

+

+rem Add tomcat-juli.jar to classpath

+rem tomcat-juli.jar can be over-ridden per instance

+if not exist "%CATALINA_BASE%\bin\tomcat-juli.jar" goto juliClasspathHome

+set "CLASSPATH=%CLASSPATH%;%CATALINA_BASE%\bin\tomcat-juli.jar"

+goto juliClasspathDone

+:juliClasspathHome

+set "CLASSPATH=%CLASSPATH%;%CATALINA_HOME%\bin\tomcat-juli.jar"

+:juliClasspathDone

+

+if not "%JSSE_OPTS%" == "" goto gotJsseOpts

+set JSSE_OPTS="-Djdk.tls.ephemeralDHKeySize=2048"

+:gotJsseOpts

+set "JAVA_OPTS=%JAVA_OPTS% %JSSE_OPTS%"

+

+rem Register custom URL handlers

+rem Do this here so custom URL handles (specifically 'war:...') can be used in the security policy

+set "JAVA_OPTS=%JAVA_OPTS% -Djava.protocol.handler.pkgs=org.apache.catalina.webresources"

+

+if not "%LOGGING_CONFIG%" == "" goto noJuliConfig

+set LOGGING_CONFIG=-Dnop

+if not exist "%CATALINA_BASE%\conf\logging.properties" goto noJuliConfig

+set LOGGING_CONFIG=-Djava.util.logging.config.file="%CATALINA_BASE%\conf\logging.properties"

+:noJuliConfig

+set "JAVA_OPTS=%JAVA_OPTS% %LOGGING_CONFIG%"

+JAVA_OPTS="-server -Xms128m -Xmx128m"

+

+if not "%LOGGING_MANAGER%" == "" goto noJuliManager

+set LOGGING_MANAGER=-Djava.util.logging.manager=org.apache.juli.ClassLoaderLogManager

+:noJuliManager

+set "JAVA_OPTS=%JAVA_OPTS% %LOGGING_MANAGER%"

+

+rem ----- Execute The Requested Command ---------------------------------------

+

+echo Using CATALINA_BASE:   "%CATALINA_BASE%"

+echo Using CATALINA_HOME:   "%CATALINA_HOME%"

+echo Using CATALINA_TMPDIR: "%CATALINA_TMPDIR%"

+if ""%1"" == ""debug"" goto use_jdk

+echo Using JRE_HOME:        "%JRE_HOME%"

+goto java_dir_displayed

+:use_jdk

+echo Using JAVA_HOME:       "%JAVA_HOME%"

+:java_dir_displayed

+echo Using CLASSPATH:       "%CLASSPATH%"

+

+set _EXECJAVA=%_RUNJAVA%

+set MAINCLASS=org.apache.catalina.startup.Bootstrap

+set ACTION=start

+set SECURITY_POLICY_FILE=

+set DEBUG_OPTS=

+set JPDA=

+

+if not ""%1"" == ""jpda"" goto noJpda

+set JPDA=jpda

+if not "%JPDA_TRANSPORT%" == "" goto gotJpdaTransport

+set JPDA_TRANSPORT=dt_socket

+:gotJpdaTransport

+if not "%JPDA_ADDRESS%" == "" goto gotJpdaAddress

+set JPDA_ADDRESS=localhost:8000

+:gotJpdaAddress

+if not "%JPDA_SUSPEND%" == "" goto gotJpdaSuspend

+set JPDA_SUSPEND=n

+:gotJpdaSuspend

+if not "%JPDA_OPTS%" == "" goto gotJpdaOpts

+set JPDA_OPTS=-agentlib:jdwp=transport=%JPDA_TRANSPORT%,address=%JPDA_ADDRESS%,server=y,suspend=%JPDA_SUSPEND%

+:gotJpdaOpts

+shift

+:noJpda

+

+if ""%1"" == ""debug"" goto doDebug

+if ""%1"" == ""run"" goto doRun

+if ""%1"" == ""start"" goto doStart

+if ""%1"" == ""stop"" goto doStop

+if ""%1"" == ""configtest"" goto doConfigTest

+if ""%1"" == ""version"" goto doVersion

+

+echo Usage:  catalina ( commands ... )

+echo commands:

+echo   debug             Start Catalina in a debugger

+echo   debug -security   Debug Catalina with a security manager

+echo   jpda start        Start Catalina under JPDA debugger

+echo   run               Start Catalina in the current window

+echo   run -security     Start in the current window with security manager

+echo   start             Start Catalina in a separate window

+echo   start -security   Start in a separate window with security manager

+echo   stop              Stop Catalina

+echo   configtest        Run a basic syntax check on server.xml

+echo   version           What version of tomcat are you running?

+goto end

+

+:doDebug

+shift

+set _EXECJAVA=%_RUNJDB%

+set DEBUG_OPTS=-sourcepath "%CATALINA_HOME%\..\..\java"

+if not ""%1"" == ""-security"" goto execCmd

+shift

+echo Using Security Manager

+set "SECURITY_POLICY_FILE=%CATALINA_BASE%\conf\catalina.policy"

+goto execCmd

+

+:doRun

+shift

+if not ""%1"" == ""-security"" goto execCmd

+shift

+echo Using Security Manager

+set "SECURITY_POLICY_FILE=%CATALINA_BASE%\conf\catalina.policy"

+goto execCmd

+

+:doStart

+shift

+if "%TITLE%" == "" set TITLE=Tomcat

+set _EXECJAVA=start "%TITLE%" %_RUNJAVA%

+if not ""%1"" == ""-security"" goto execCmd

+shift

+echo Using Security Manager

+set "SECURITY_POLICY_FILE=%CATALINA_BASE%\conf\catalina.policy"

+goto execCmd

+

+:doStop

+shift

+set ACTION=stop

+set CATALINA_OPTS=

+goto execCmd

+

+:doConfigTest

+shift

+set ACTION=configtest

+set CATALINA_OPTS=

+goto execCmd

+

+:doVersion

+%_EXECJAVA% -classpath "%CATALINA_HOME%\lib\catalina.jar" org.apache.catalina.util.ServerInfo

+goto end

+

+

+:execCmd

+rem Get remaining unshifted command line arguments and save them in the

+set CMD_LINE_ARGS=

+:setArgs

+if ""%1""=="""" goto doneSetArgs

+set CMD_LINE_ARGS=%CMD_LINE_ARGS% %1

+shift

+goto setArgs

+:doneSetArgs

+

+rem Execute Java with the applicable properties

+if not "%JPDA%" == "" goto doJpda

+if not "%SECURITY_POLICY_FILE%" == "" goto doSecurity

+%_EXECJAVA% %JAVA_OPTS% %CATALINA_OPTS% %DEBUG_OPTS% -classpath "%CLASSPATH%" -Dcatalina.base="%CATALINA_BASE%" -Dcatalina.home="%CATALINA_HOME%" -Djava.io.tmpdir="%CATALINA_TMPDIR%" %MAINCLASS% %CMD_LINE_ARGS% %ACTION%

+goto end

+:doSecurity

+%_EXECJAVA% %JAVA_OPTS% %CATALINA_OPTS% %DEBUG_OPTS% -classpath "%CLASSPATH%" -Djava.security.manager -Djava.security.policy=="%SECURITY_POLICY_FILE%" -Dcatalina.base="%CATALINA_BASE%" -Dcatalina.home="%CATALINA_HOME%" -Djava.io.tmpdir="%CATALINA_TMPDIR%" %MAINCLASS% %CMD_LINE_ARGS% %ACTION%

+goto end

+:doJpda

+if not "%SECURITY_POLICY_FILE%" == "" goto doSecurityJpda

+%_EXECJAVA% %JAVA_OPTS% %JPDA_OPTS% %CATALINA_OPTS% %DEBUG_OPTS% -classpath "%CLASSPATH%" -Dcatalina.base="%CATALINA_BASE%" -Dcatalina.home="%CATALINA_HOME%" -Djava.io.tmpdir="%CATALINA_TMPDIR%" %MAINCLASS% %CMD_LINE_ARGS% %ACTION%

+goto end

+:doSecurityJpda

+%_EXECJAVA% %JAVA_OPTS% %JPDA_OPTS% %CATALINA_OPTS% %DEBUG_OPTS% -classpath "%CLASSPATH%" -Djava.security.manager -Djava.security.policy=="%SECURITY_POLICY_FILE%" -Dcatalina.base="%CATALINA_BASE%" -Dcatalina.home="%CATALINA_HOME%" -Djava.io.tmpdir="%CATALINA_TMPDIR%" %MAINCLASS% %CMD_LINE_ARGS% %ACTION%

+goto end

+

+:end

diff --git a/httpserver/src/main/assembly/tomcat/bin/catalina.sh b/httpserver/src/main/assembly/tomcat/bin/catalina.sh
new file mode 100644
index 0000000..2cdfd32
--- /dev/null
+++ b/httpserver/src/main/assembly/tomcat/bin/catalina.sh
@@ -0,0 +1,616 @@
+#!/bin/sh
+
+# Licensed to the Apache Software Foundation (ASF) under one or more
+# contributor license agreements.  See the NOTICE file distributed with
+# this work for additional information regarding copyright ownership.
+# The ASF licenses this file to You under the Apache License, Version 2.0
+# (the "License"); you may not use this file except in compliance with
+# the License.  You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# -----------------------------------------------------------------------------
+# Control Script for the CATALINA Server
+#
+# Environment Variable Prerequisites
+#
+#   Do not set the variables in this script. Instead put them into a script
+#   setenv.sh in CATALINA_BASE/bin to keep your customizations separate.
+#
+#   CATALINA_HOME   May point at your Catalina "build" directory.
+#
+#   CATALINA_BASE   (Optional) Base directory for resolving dynamic portions
+#                   of a Catalina installation.  If not present, resolves to
+#                   the same directory that CATALINA_HOME points to.
+#
+#   CATALINA_OUT    (Optional) Full path to a file where stdout and stderr
+#                   will be redirected.
+#                   Default is $CATALINA_BASE/logs/catalina.out
+#
+#   CATALINA_OPTS   (Optional) Java runtime options used when the "start",
+#                   "run" or "debug" command is executed.
+#                   Include here and not in JAVA_OPTS all options, that should
+#                   only be used by Tomcat itself, not by the stop process,
+#                   the version command etc.
+#                   Examples are heap size, GC logging, JMX ports etc.
+#
+#   CATALINA_TMPDIR (Optional) Directory path location of temporary directory
+#                   the JVM should use (java.io.tmpdir).  Defaults to
+#                   $CATALINA_BASE/temp.
+#
+#   JAVA_HOME       Must point at your Java Development Kit installation.
+#                   Required to run the with the "debug" argument.
+#
+#   JRE_HOME        Must point at your Java Runtime installation.
+#                   Defaults to JAVA_HOME if empty. If JRE_HOME and JAVA_HOME
+#                   are both set, JRE_HOME is used.
+#
+#   JAVA_OPTS       (Optional) Java runtime options used when any command
+#                   is executed.
+#                   Include here and not in CATALINA_OPTS all options, that
+#                   should be used by Tomcat and also by the stop process,
+#                   the version command etc.
+#                   Most options should go into CATALINA_OPTS.
+#
+#   JPDA_TRANSPORT  (Optional) JPDA transport used when the "jpda start"
+#                   command is executed. The default is "dt_socket".
+#
+#   JPDA_ADDRESS    (Optional) Java runtime options used when the "jpda start"
+#                   command is executed. The default is localhost:8000.
+#
+#   JPDA_SUSPEND    (Optional) Java runtime options used when the "jpda start"
+#                   command is executed. Specifies whether JVM should suspend
+#                   execution immediately after startup. Default is "n".
+#
+#   JPDA_OPTS       (Optional) Java runtime options used when the "jpda start"
+#                   command is executed. If used, JPDA_TRANSPORT, JPDA_ADDRESS,
+#                   and JPDA_SUSPEND are ignored. Thus, all required jpda
+#                   options MUST be specified. The default is:
+#
+#                   -agentlib:jdwp=transport=$JPDA_TRANSPORT,
+#                       address=$JPDA_ADDRESS,server=y,suspend=$JPDA_SUSPEND
+#
+#   JSSE_OPTS       (Optional) Java runtime options used to control the TLS
+#                   implementation when JSSE is used. Default is:
+#                   "-Djdk.tls.ephemeralDHKeySize=2048"
+#
+#   CATALINA_PID    (Optional) Path of the file which should contains the pid
+#                   of the catalina startup java process, when start (fork) is
+#                   used
+#
+#   LOGGING_CONFIG  (Optional) Override Tomcat's logging config file
+#                   Example (all one line)
+#                   LOGGING_CONFIG="-Djava.util.logging.config.file=$CATALINA_BASE/conf/logging.properties"
+#
+#   LOGGING_MANAGER (Optional) Override Tomcat's logging manager
+#                   Example (all one line)
+#                   LOGGING_MANAGER="-Djava.util.logging.manager=org.apache.juli.ClassLoaderLogManager"
+#
+#   UMASK           (Optional) Override Tomcat's default UMASK of 0027
+#
+#   USE_NOHUP       (Optional) If set to the string true the start command will
+#                   use nohup so that the Tomcat process will ignore any hangup
+#                   signals. Default is "false" unless running on HP-UX in which
+#                   case the default is "true"
+# -----------------------------------------------------------------------------
+
+# OS specific support.  $var _must_ be set to either true or false.
+JAVA_OPTS="-server -Xms128m -Xmx128m"
+cygwin=false
+darwin=false
+os400=false
+hpux=false
+case "`uname`" in
+CYGWIN*) cygwin=true;;
+Darwin*) darwin=true;;
+OS400*) os400=true;;
+HP-UX*) hpux=true;;
+esac
+
+# resolve links - $0 may be a softlink
+PRG="$0"
+
+while [ -h "$PRG" ]; do
+  ls=`ls -ld "$PRG"`
+  link=`expr "$ls" : '.*-> \(.*\)$'`
+  if expr "$link" : '/.*' > /dev/null; then
+    PRG="$link"
+  else
+    PRG=`dirname "$PRG"`/"$link"
+  fi
+done
+
+# Get standard environment variables
+PRGDIR=`dirname "$PRG"`
+
+# Only set CATALINA_HOME if not already set
+[ -z "$CATALINA_HOME" ] && CATALINA_HOME=`cd "$PRGDIR/.." >/dev/null; pwd`
+
+# Copy CATALINA_BASE from CATALINA_HOME if not already set
+[ -z "$CATALINA_BASE" ] && CATALINA_BASE="$CATALINA_HOME"
+
+# Ensure that any user defined CLASSPATH variables are not used on startup,
+# but allow them to be specified in setenv.sh, in rare case when it is needed.
+CLASSPATH=
+
+if [ -r "$CATALINA_BASE/bin/setenv.sh" ]; then
+  . "$CATALINA_BASE/bin/setenv.sh"
+elif [ -r "$CATALINA_HOME/bin/setenv.sh" ]; then
+  . "$CATALINA_HOME/bin/setenv.sh"
+fi
+
+# For Cygwin, ensure paths are in UNIX format before anything is touched
+if $cygwin; then
+  [ -n "$JAVA_HOME" ] && JAVA_HOME=`cygpath --unix "$JAVA_HOME"`
+  [ -n "$JRE_HOME" ] && JRE_HOME=`cygpath --unix "$JRE_HOME"`
+  [ -n "$CATALINA_HOME" ] && CATALINA_HOME=`cygpath --unix "$CATALINA_HOME"`
+  [ -n "$CATALINA_BASE" ] && CATALINA_BASE=`cygpath --unix "$CATALINA_BASE"`
+  [ -n "$CLASSPATH" ] && CLASSPATH=`cygpath --path --unix "$CLASSPATH"`
+fi
+
+# Ensure that neither CATALINA_HOME nor CATALINA_BASE contains a colon
+# as this is used as the separator in the classpath and Java provides no
+# mechanism for escaping if the same character appears in the path.
+case $CATALINA_HOME in
+  *:*) echo "Using CATALINA_HOME:   $CATALINA_HOME";
+       echo "Unable to start as CATALINA_HOME contains a colon (:) character";
+       exit 1;
+esac
+case $CATALINA_BASE in
+  *:*) echo "Using CATALINA_BASE:   $CATALINA_BASE";
+       echo "Unable to start as CATALINA_BASE contains a colon (:) character";
+       exit 1;
+esac
+
+# For OS400
+if $os400; then
+  # Set job priority to standard for interactive (interactive - 6) by using
+  # the interactive priority - 6, the helper threads that respond to requests
+  # will be running at the same priority as interactive jobs.
+  COMMAND='chgjob job('$JOBNAME') runpty(6)'
+  system $COMMAND
+
+  # Enable multi threading
+  export QIBM_MULTI_THREADED=Y
+fi
+
+# Get standard Java environment variables
+if $os400; then
+  # -r will Only work on the os400 if the files are:
+  # 1. owned by the user
+  # 2. owned by the PRIMARY group of the user
+  # this will not work if the user belongs in secondary groups
+  . "$CATALINA_HOME"/bin/setclasspath.sh
+else
+  if [ -r "$CATALINA_HOME"/bin/setclasspath.sh ]; then
+    . "$CATALINA_HOME"/bin/setclasspath.sh
+  else
+    echo "Cannot find $CATALINA_HOME/bin/setclasspath.sh"
+    echo "This file is needed to run this program"
+    exit 1
+  fi
+fi
+
+# Add on extra jar files to CLASSPATH
+if [ ! -z "$CLASSPATH" ] ; then
+  CLASSPATH="$CLASSPATH":
+fi
+CLASSPATH="$CLASSPATH""$CATALINA_HOME"/bin/bootstrap.jar
+
+if [ -z "$CATALINA_OUT" ] ; then
+  CATALINA_OUT="$CATALINA_BASE"/logs/catalina.out
+fi
+
+if [ -z "$CATALINA_TMPDIR" ] ; then
+  # Define the java.io.tmpdir to use for Catalina
+  CATALINA_TMPDIR="$CATALINA_BASE"/temp
+fi
+
+# Add tomcat-juli.jar to classpath
+# tomcat-juli.jar can be over-ridden per instance
+if [ -r "$CATALINA_BASE/bin/tomcat-juli.jar" ] ; then
+  CLASSPATH=$CLASSPATH:$CATALINA_BASE/bin/tomcat-juli.jar
+else
+  CLASSPATH=$CLASSPATH:$CATALINA_HOME/bin/tomcat-juli.jar
+fi
+
+# Bugzilla 37848: When no TTY is available, don't output to console
+have_tty=0
+if [ "`tty`" != "not a tty" ]; then
+    have_tty=1
+fi
+
+# For Cygwin, switch paths to Windows format before running java
+if $cygwin; then
+  JAVA_HOME=`cygpath --absolute --windows "$JAVA_HOME"`
+  JRE_HOME=`cygpath --absolute --windows "$JRE_HOME"`
+  CATALINA_HOME=`cygpath --absolute --windows "$CATALINA_HOME"`
+  CATALINA_BASE=`cygpath --absolute --windows "$CATALINA_BASE"`
+  CATALINA_TMPDIR=`cygpath --absolute --windows "$CATALINA_TMPDIR"`
+  CLASSPATH=`cygpath --path --windows "$CLASSPATH"`
+fi
+
+if [ -z "$JSSE_OPTS" ] ; then
+  JSSE_OPTS="-Djdk.tls.ephemeralDHKeySize=2048"
+fi
+JAVA_OPTS="$JAVA_OPTS $JSSE_OPTS"
+
+# Register custom URL handlers
+# Do this here so custom URL handles (specifically 'war:...') can be used in the security policy
+JAVA_OPTS="$JAVA_OPTS -Djava.protocol.handler.pkgs=org.apache.catalina.webresources"
+
+# Set juli LogManager config file if it is present and an override has not been issued
+if [ -z "$LOGGING_CONFIG" ]; then
+  if [ -r "$CATALINA_BASE"/conf/logging.properties ]; then
+    LOGGING_CONFIG="-Djava.util.logging.config.file=$CATALINA_BASE/conf/logging.properties"
+  else
+    # Bugzilla 45585
+    LOGGING_CONFIG="-Dnop"
+  fi
+fi
+
+if [ -z "$LOGGING_MANAGER" ]; then
+  LOGGING_MANAGER="-Djava.util.logging.manager=org.apache.juli.ClassLoaderLogManager"
+fi
+
+# Set UMASK unless it has been overridden
+if [ -z "$UMASK" ]; then
+    UMASK="0027"
+fi
+umask $UMASK
+
+# Uncomment the following line to make the umask available when using the
+# org.apache.catalina.security.SecurityListener
+#JAVA_OPTS="$JAVA_OPTS -Dorg.apache.catalina.security.SecurityListener.UMASK=`umask`"
+
+if [ -z "$USE_NOHUP" ]; then
+    if $hpux; then
+        USE_NOHUP="true"
+    else
+        USE_NOHUP="false"
+    fi
+fi
+unset _NOHUP
+if [ "$USE_NOHUP" = "true" ]; then
+    _NOHUP=nohup
+fi
+
+# ----- Execute The Requested Command -----------------------------------------
+
+# Bugzilla 37848: only output this if we have a TTY
+if [ $have_tty -eq 1 ]; then
+  echo "Using CATALINA_BASE:   $CATALINA_BASE"
+  echo "Using CATALINA_HOME:   $CATALINA_HOME"
+  echo "Using CATALINA_TMPDIR: $CATALINA_TMPDIR"
+  if [ "$1" = "debug" ] ; then
+    echo "Using JAVA_HOME:       $JAVA_HOME"
+  else
+    echo "Using JRE_HOME:        $JRE_HOME"
+  fi
+  echo "Using CLASSPATH:       $CLASSPATH"
+  if [ ! -z "$CATALINA_PID" ]; then
+    echo "Using CATALINA_PID:    $CATALINA_PID"
+  fi
+fi
+
+if [ "$1" = "jpda" ] ; then
+  if [ -z "$JPDA_TRANSPORT" ]; then
+    JPDA_TRANSPORT="dt_socket"
+  fi
+  if [ -z "$JPDA_ADDRESS" ]; then
+    JPDA_ADDRESS="localhost:8000"
+  fi
+  if [ -z "$JPDA_SUSPEND" ]; then
+    JPDA_SUSPEND="n"
+  fi
+  if [ -z "$JPDA_OPTS" ]; then
+    JPDA_OPTS="-agentlib:jdwp=transport=$JPDA_TRANSPORT,address=$JPDA_ADDRESS,server=y,suspend=$JPDA_SUSPEND"
+  fi
+  CATALINA_OPTS="$JPDA_OPTS $CATALINA_OPTS"
+  shift
+fi
+
+if [ "$1" = "debug" ] ; then
+  if $os400; then
+    echo "Debug command not available on OS400"
+    exit 1
+  else
+    shift
+    if [ "$1" = "-security" ] ; then
+      if [ $have_tty -eq 1 ]; then
+        echo "Using Security Manager"
+      fi
+      shift
+      exec "$_RUNJDB" "$LOGGING_CONFIG" $LOGGING_MANAGER $JAVA_OPTS $CATALINA_OPTS \
+        -classpath "$CLASSPATH" \
+        -sourcepath "$CATALINA_HOME"/../../java \
+        -Djava.security.manager \
+        -Djava.security.policy=="$CATALINA_BASE"/conf/catalina.policy \
+        -Dcatalina.base="$CATALINA_BASE" \
+        -Dcatalina.home="$CATALINA_HOME" \
+        -Djava.io.tmpdir="$CATALINA_TMPDIR" \
+        org.apache.catalina.startup.Bootstrap "$@" start
+    else
+      exec "$_RUNJDB" "$LOGGING_CONFIG" $LOGGING_MANAGER $JAVA_OPTS $CATALINA_OPTS \
+        -classpath "$CLASSPATH" \
+        -sourcepath "$CATALINA_HOME"/../../java \
+        -Dcatalina.base="$CATALINA_BASE" \
+        -Dcatalina.home="$CATALINA_HOME" \
+        -Djava.io.tmpdir="$CATALINA_TMPDIR" \
+        org.apache.catalina.startup.Bootstrap "$@" start
+    fi
+  fi
+
+elif [ "$1" = "run" ]; then
+
+  shift
+  if [ "$1" = "-security" ] ; then
+    if [ $have_tty -eq 1 ]; then
+      echo "Using Security Manager"
+    fi
+    shift
+    eval exec "\"$_RUNJAVA\"" "\"$LOGGING_CONFIG\"" $LOGGING_MANAGER $JAVA_OPTS $CATALINA_OPTS \
+      -classpath "\"$CLASSPATH\"" \
+      -Djava.security.manager \
+      -Djava.security.policy=="\"$CATALINA_BASE/conf/catalina.policy\"" \
+      -Dcatalina.base="\"$CATALINA_BASE\"" \
+      -Dcatalina.home="\"$CATALINA_HOME\"" \
+      -Djava.io.tmpdir="\"$CATALINA_TMPDIR\"" \
+      org.apache.catalina.startup.Bootstrap "$@" start
+  else
+    eval exec "\"$_RUNJAVA\"" "\"$LOGGING_CONFIG\"" $LOGGING_MANAGER $JAVA_OPTS $CATALINA_OPTS \
+      -classpath "\"$CLASSPATH\"" \
+      -Dcatalina.base="\"$CATALINA_BASE\"" \
+      -Dcatalina.home="\"$CATALINA_HOME\"" \
+      -Djava.io.tmpdir="\"$CATALINA_TMPDIR\"" \
+      org.apache.catalina.startup.Bootstrap "$@" start
+  fi
+
+elif [ "$1" = "start" ] ; then
+
+  if [ ! -z "$CATALINA_PID" ]; then
+    if [ -f "$CATALINA_PID" ]; then
+      if [ -s "$CATALINA_PID" ]; then
+        echo "Existing PID file found during start."
+        if [ -r "$CATALINA_PID" ]; then
+          PID=`cat "$CATALINA_PID"`
+          ps -p $PID >/dev/null 2>&1
+          if [ $? -eq 0 ] ; then
+            echo "Tomcat appears to still be running with PID $PID. Start aborted."
+            echo "If the following process is not a Tomcat process, remove the PID file and try again:"
+            ps -f -p $PID
+            exit 1
+          else
+            echo "Removing/clearing stale PID file."
+            rm -f "$CATALINA_PID" >/dev/null 2>&1
+            if [ $? != 0 ]; then
+              if [ -w "$CATALINA_PID" ]; then
+                cat /dev/null > "$CATALINA_PID"
+              else
+                echo "Unable to remove or clear stale PID file. Start aborted."
+                exit 1
+              fi
+            fi
+          fi
+        else
+          echo "Unable to read PID file. Start aborted."
+          exit 1
+        fi
+      else
+        rm -f "$CATALINA_PID" >/dev/null 2>&1
+        if [ $? != 0 ]; then
+          if [ ! -w "$CATALINA_PID" ]; then
+            echo "Unable to remove or write to empty PID file. Start aborted."
+            exit 1
+          fi
+        fi
+      fi
+    fi
+  fi
+
+  shift
+  touch "$CATALINA_OUT"
+  if [ "$1" = "-security" ] ; then
+    if [ $have_tty -eq 1 ]; then
+      echo "Using Security Manager"
+    fi
+    shift
+    eval $_NOHUP "\"$_RUNJAVA\"" "\"$LOGGING_CONFIG\"" $LOGGING_MANAGER $JAVA_OPTS $CATALINA_OPTS \
+      -classpath "\"$CLASSPATH\"" \
+      -Djava.security.manager \
+      -Djava.security.policy=="\"$CATALINA_BASE/conf/catalina.policy\"" \
+      -Dcatalina.base="\"$CATALINA_BASE\"" \
+      -Dcatalina.home="\"$CATALINA_HOME\"" \
+      -Djava.io.tmpdir="\"$CATALINA_TMPDIR\"" \
+      org.apache.catalina.startup.Bootstrap "$@" start \
+      >> "$CATALINA_OUT" 2>&1 "&"
+
+  else
+    eval $_NOHUP "\"$_RUNJAVA\"" "\"$LOGGING_CONFIG\"" $LOGGING_MANAGER $JAVA_OPTS $CATALINA_OPTS \
+      -classpath "\"$CLASSPATH\"" \
+      -Dcatalina.base="\"$CATALINA_BASE\"" \
+      -Dcatalina.home="\"$CATALINA_HOME\"" \
+      -Djava.io.tmpdir="\"$CATALINA_TMPDIR\"" \
+      org.apache.catalina.startup.Bootstrap "$@" start \
+      >> "$CATALINA_OUT" 2>&1 "&"
+
+  fi
+
+  if [ ! -z "$CATALINA_PID" ]; then
+    echo $! > "$CATALINA_PID"
+  fi
+
+  echo "Tomcat started."
+
+elif [ "$1" = "stop" ] ; then
+
+  shift
+
+  SLEEP=5
+  if [ ! -z "$1" ]; then
+    echo $1 | grep "[^0-9]" >/dev/null 2>&1
+    if [ $? -gt 0 ]; then
+      SLEEP=$1
+      shift
+    fi
+  fi
+
+  FORCE=0
+  if [ "$1" = "-force" ]; then
+    shift
+    FORCE=1
+  fi
+
+  if [ ! -z "$CATALINA_PID" ]; then
+    if [ -f "$CATALINA_PID" ]; then
+      if [ -s "$CATALINA_PID" ]; then
+        kill -0 `cat "$CATALINA_PID"` >/dev/null 2>&1
+        if [ $? -gt 0 ]; then
+          echo "PID file found but no matching process was found. Stop aborted."
+          exit 1
+        fi
+      else
+        echo "PID file is empty and has been ignored."
+      fi
+    else
+      echo "\$CATALINA_PID was set but the specified file does not exist. Is Tomcat running? Stop aborted."
+      exit 1
+    fi
+  fi
+
+  eval "\"$_RUNJAVA\"" $JAVA_OPTS \
+    -classpath "\"$CLASSPATH\"" \
+    -Dcatalina.base="\"$CATALINA_BASE\"" \
+    -Dcatalina.home="\"$CATALINA_HOME\"" \
+    -Djava.io.tmpdir="\"$CATALINA_TMPDIR\"" \
+    org.apache.catalina.startup.Bootstrap "$@" stop
+
+  # stop failed. Shutdown port disabled? Try a normal kill.
+  if [ $? != 0 ]; then
+    if [ ! -z "$CATALINA_PID" ]; then
+      echo "The stop command failed. Attempting to signal the process to stop through OS signal."
+      kill -15 `cat "$CATALINA_PID"` >/dev/null 2>&1
+    fi
+  fi
+
+  if [ ! -z "$CATALINA_PID" ]; then
+    if [ -f "$CATALINA_PID" ]; then
+      while [ $SLEEP -ge 0 ]; do
+        kill -0 `cat "$CATALINA_PID"` >/dev/null 2>&1
+        if [ $? -gt 0 ]; then
+          rm -f "$CATALINA_PID" >/dev/null 2>&1
+          if [ $? != 0 ]; then
+            if [ -w "$CATALINA_PID" ]; then
+              cat /dev/null > "$CATALINA_PID"
+              # If Tomcat has stopped don't try and force a stop with an empty PID file
+              FORCE=0
+            else
+              echo "The PID file could not be removed or cleared."
+            fi
+          fi
+          echo "Tomcat stopped."
+          break
+        fi
+        if [ $SLEEP -gt 0 ]; then
+          sleep 1
+        fi
+        if [ $SLEEP -eq 0 ]; then
+          echo "Tomcat did not stop in time."
+          if [ $FORCE -eq 0 ]; then
+            echo "PID file was not removed."
+          fi
+          echo "To aid diagnostics a thread dump has been written to standard out."
+          kill -3 `cat "$CATALINA_PID"`
+        fi
+        SLEEP=`expr $SLEEP - 1 `
+      done
+    fi
+  fi
+
+  KILL_SLEEP_INTERVAL=5
+  if [ $FORCE -eq 1 ]; then
+    if [ -z "$CATALINA_PID" ]; then
+      echo "Kill failed: \$CATALINA_PID not set"
+    else
+      if [ -f "$CATALINA_PID" ]; then
+        PID=`cat "$CATALINA_PID"`
+        echo "Killing Tomcat with the PID: $PID"
+        kill -9 $PID
+        while [ $KILL_SLEEP_INTERVAL -ge 0 ]; do
+            kill -0 `cat "$CATALINA_PID"` >/dev/null 2>&1
+            if [ $? -gt 0 ]; then
+                rm -f "$CATALINA_PID" >/dev/null 2>&1
+                if [ $? != 0 ]; then
+                    if [ -w "$CATALINA_PID" ]; then
+                        cat /dev/null > "$CATALINA_PID"
+                    else
+                        echo "The PID file could not be removed."
+                    fi
+                fi
+                echo "The Tomcat process has been killed."
+                break
+            fi
+            if [ $KILL_SLEEP_INTERVAL -gt 0 ]; then
+                sleep 1
+            fi
+            KILL_SLEEP_INTERVAL=`expr $KILL_SLEEP_INTERVAL - 1 `
+        done
+        if [ $KILL_SLEEP_INTERVAL -lt 0 ]; then
+            echo "Tomcat has not been killed completely yet. The process might be waiting on some system call or might be UNINTERRUPTIBLE."
+        fi
+      fi
+    fi
+  fi
+
+elif [ "$1" = "configtest" ] ; then
+
+    eval "\"$_RUNJAVA\"" $LOGGING_MANAGER $JAVA_OPTS \
+      -classpath "\"$CLASSPATH\"" \
+      -Dcatalina.base="\"$CATALINA_BASE\"" \
+      -Dcatalina.home="\"$CATALINA_HOME\"" \
+      -Djava.io.tmpdir="\"$CATALINA_TMPDIR\"" \
+      org.apache.catalina.startup.Bootstrap configtest
+    result=$?
+    if [ $result -ne 0 ]; then
+        echo "Configuration error detected!"
+    fi
+    exit $result
+
+elif [ "$1" = "version" ] ; then
+
+    "$_RUNJAVA"   \
+      -classpath "$CATALINA_HOME/lib/catalina.jar" \
+      org.apache.catalina.util.ServerInfo
+
+else
+
+  echo "Usage: catalina.sh ( commands ... )"
+  echo "commands:"
+  if $os400; then
+    echo "  debug             Start Catalina in a debugger (not available on OS400)"
+    echo "  debug -security   Debug Catalina with a security manager (not available on OS400)"
+  else
+    echo "  debug             Start Catalina in a debugger"
+    echo "  debug -security   Debug Catalina with a security manager"
+  fi
+  echo "  jpda start        Start Catalina under JPDA debugger"
+  echo "  run               Start Catalina in the current window"
+  echo "  run -security     Start in the current window with security manager"
+  echo "  start             Start Catalina in a separate window"
+  echo "  start -security   Start in a separate window with security manager"
+  echo "  stop              Stop Catalina, waiting up to 5 seconds for the process to end"
+  echo "  stop n            Stop Catalina, waiting up to n seconds for the process to end"
+  echo "  stop -force       Stop Catalina, wait up to 5 seconds and then use kill -KILL if still running"
+  echo "  stop n -force     Stop Catalina, wait up to n seconds and then use kill -KILL if still running"
+  echo "  configtest        Run a basic syntax check on server.xml - check exit code for result"
+  echo "  version           What version of tomcat are you running?"
+  echo "Note: Waiting for the process to end and use of the -force option require that \$CATALINA_PID is defined"
+  exit 1
+
+fi