Fix headings and code-blocks formatting

Headings added to aid navigation and fixed all the code examples to use
code-block

Issue-ID: DOC-114

Change-Id: I205f47016df26a298473ee8290931e0d809a140d
Signed-off-by: MatthewHarffy <Matthew.harffy@amdocs.com>

1 files changed, 99 insertions, 71 deletions

diff --git a/docs/platform/Getting Started/AAI_Developer_Environment_Setup.rst b/docs/platform/Getting Started/AAI_Developer_Environment_Setup.rst
index a5809ec2..6f7871cc 100644
--- a/docs/platform/Getting Started/AAI_Developer_Environment_Setup.rst
+++ b/docs/platform/Getting Started/AAI_Developer_Environment_Setup.rst
@@ -13,15 +13,17 @@ Ubuntu 16.04.  
 For this exercise, I set up a new instance of Ubuntu in Virtualbox and
 gave it 16G RAM, 200GB dynamically allocated storage, and 3 processors.
 
-- install openjdk 8
+Install openjdk 8
+-----------------
 
-   ..code:: bash
+   .. code:: bash
 
-       sudo apt install openjdk-8-jdk
+      sudo apt install openjdk-8-jdk
 
-- Install single node hadoop/titan
+Install single node hadoop/titan
+--------------------------------
 
-   ..code:: bash
+   .. code-block:: bash
 
      wget http://s3.thinkaurelius.com/downloads/titan/titan-1.0.0-hadoop1.zip
 
@@ -31,9 +33,10 @@ gave it 16G RAM, 200GB dynamically allocated storage, and 3 processors.
      
      sudo ./bin/titan.sh start
 
-- Install haproxy
+Install haproxy
+---------------
 
-   ..code:: bash
+   .. code-block:: bash
 
      sudo apt-get -y install haproxy
 
@@ -46,7 +49,7 @@ gave it 16G RAM, 200GB dynamically allocated storage, and 3 processors.
 
     `haproxy.cfg <https://wiki.onap.org/download/attachments/10782088/haproxy.cfg?version=2&modificationDate=1501018863000&api=v2>`__
 
-  ..code:: bash
+  .. code-block:: bash
 
     sudo cp aai.pem /etc/ssl/private/aai.pem
 
@@ -56,26 +59,29 @@ gave it 16G RAM, 200GB dynamically allocated storage, and 3 processors.
 
   `aai.pem <https://wiki.onap.org/download/attachments/10782088/aai.pem?version=1&modificationDate=1501019585000&api=v2>`__
 
-  ..code::bash
+  .. code-block:: bash
 
     sudo mkdir /usr/local/etc/haproxy
 
-- Add these hostnames to the loopback interface in /etc/hosts: 
+- Add these hostnames to the loopback interface in /etc/hosts
 
-   ..code:: bash
+   .. code-block:: bash
 
      127.0.0.1 localhost aai-traversal.api.simpledemo.openecomp.org aai-resouces.api.simpledemo.openecomp.org
 
 - Restart haproxy
 
-   ..code:: bash
+   .. code-block:: bash
 
      sudo service haproxy restart
 
-- Set up repos. First, follow the initial setup instructions in 
+Set up repos
+------------
+
+- First, follow the initial setup instructions in 
   `Setting Up Your Development Environment <https://wiki.onap.org/display/DW/Setting+Up+Your+Development+Environment>`__
 
-  ..code:: bash
+  .. code-block:: bash
 
     mkdir -p ~/LF/AAI
 
@@ -95,9 +101,10 @@ gave it 16G RAM, 200GB dynamically allocated storage, and 3 processors.
   settings.xml file should solve this problem:
   `Setting Up Your Development Environment#MavenExamplesettings.xml <https://wiki.onap.org/display/DW/Setting+Up+Your+Development+Environment#SettingUpYourDevelopmentEnvironment-MavenExamplesettings.xml>`__
 
-- Build aai-common, traversal, and resources
+Build aai-common, traversal, and resources
+------------------------------------------
 
-   ..code:: bash
+   .. code-block:: bash
      
      cd ~/LF/AAI/aai-common
 
@@ -111,21 +118,26 @@ gave it 16G RAM, 200GB dynamically allocated storage, and 3 processors.
 
      mvn clean install # Should result in BUILD SUCCESS
 
-     cd ~/LF/AAI/traversal # I had to add the following to traversal/pom.xml to get
-         traversal to build: 
+     cd ~/LF/AAI/traversal
+
+You might need to add the following to traversal/pom.xml to get traversal to build: 
+
+       .. code-block:: xml
 
-       ..code:: xml
         <repositories><repository><id>maven-restlet</id><name>Restlet repository</name><url>https://maven.restlet.com</url></repository></repositories>
 
+   .. code-block:: bash
+
      mvn clean install # Should result in BUILD SUCCESS
 
-- Titan setup
+Titan setup
+-----------
 
    1. Modify both titan-cached.properties and
         titan-realtime.properties to the following (for all MS’s that
         will connect to the local Cassandra backend)
       
-	..code:: bash
+	.. code-block:: bash
 
 	  storage.backend=\ *cassandra*
 	  storage.hostname=\ *localhost*
@@ -147,7 +159,7 @@ gave it 16G RAM, 200GB dynamically allocated storage, and 3 processors.
         specified Titan will try to create/use a defaulted keyspace
         named titan.
 
-	..code:: bash
+	.. code-block:: bash
 
 	  storage.cassandra.keyspace=<keyspace name>
 
@@ -160,103 +172,119 @@ gave it 16G RAM, 200GB dynamically allocated storage, and 3 processors.
     Runnable class org.onap.aai.dbgen.GenTester with the following vm
     args.
 
-    ..code:: bash
+    .. code-block:: bash
 
       -DAJSC_HOME=~/LF/AAI/resources -DBUNDLECONFIG\_DIR="bundleconfig-local"
 
    9. Here's the command I used, and it worked:
 
-      ..code:: bash
+      .. code-block:: bash
 
         cd ~/LF/AAI; java -DAJSC_HOME=/home/jimmy/LF/AAI/resources/aai-resources
         -DBUNDLECONFIG_DIR="bundleconfig-local" -cp
         aai-common/aai-core/target/aai-core-1.1.0-SNAPSHOT.jar:resources/aai-resources/target/aai-resources.jar:resources/aai-resources/target/userjars/\*
         org.onap.aai.dbgen.GenTester
 
-- Start the "resources" microservice
+Start the "resources" microservice
+----------------------------------
 
    1. Resources runs on port 8446.  Go to the resources directory
    
-      ..code:: bash
-        cd ~/LF/AAI/resources
+      .. code-block:: bash
+
+       $ cd ~/LF/AAI/resources
 
    2. Set the debug port to 9446
 
-      ..code:: bash
-      
-        export MAVEN_OPTS="-Xms1024m -Xmx5120m -XX:PermSize=2024m
+      .. code-block:: bash
+
+          export MAVEN_OPTS="-Xms1024m -Xmx5120m -XX:PermSize=2024m
           -Xdebug -Xnoagent -Djava.compiler=NONE
           -Xrunjdwp:transport=dt_socket,address=9446,server=y,suspend=n"
 
    3. Start the microservice
 
-      ..code::bash
+      .. code-block::bash
 
-        mvn -P runAjsc
+        $ mvn -P runAjsc
 
-16. Verify the resources microservice (this example uses Postman utility
-   for Google Chrome)
+Verify the resources microservice (this example uses Postman utility for Google Chrome)
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
-   1. | Use basic auth, user = AAI, pw = AAI
+   1.  Use basic auth, user = AAI, pw = AAI
 
-   2. | Set the X-TransactionId header (in the example below, the value is
-      | 9999)
+   2.  Set the X-TransactionId header (in the example below, the value is
+       9999)
 
-   3. | Set the X-FromAppId header (in the example below, the value is
-      | jimmy-postman)
+   3.  Set the X-FromAppId header (in the example below, the value is
+       jimmy-postman)
 
-   4. | Perform a GET of https://127.0.0.1:8443/aai/v11/network/vces
+   4.  Perform a GET of https://127.0.0.1:8443/aai/v11/network/vces
 
-   5. | You should see an error as below, 404 Not Found, ERR.5.4.6114. 
-      | This indicates that the service is functioning normally:
+   5.  You should see an error as below, 404 Not Found, ERR.5.4.6114. 
+       This indicates that the service is functioning normally:
 
 +------------------------------------------+
-| |image1|   |
+| |image1|                                 |
 +------------------------------------------+
 
+Start the "traversal" microservice
+----------------------------------
+
+   1. Traversal runs on port 8447.  Go to the traversal directory:
 
-18. Start the "traversal" microservice
+      .. code-block:: bash
 
-   1. | Traversal runs on port 8447.  Go to the traversal directory
-      ..code:: bash
-      $ cd ~/LF/AAI/traversal
+       $ cd ~/LF/AAI/traversal
+      
+   2.  Set the debug port to 9447
 
-   2. | Set the debug port to 9447
-      | $ export MAVEN_OPTS="-Xms1024m -Xmx5120m -XX:PermSize=2024m
+       $ export MAVEN_OPTS="-Xms1024m -Xmx5120m -XX:PermSize=2024m
         -Xdebug -Xnoagent -Djava.compiler=NONE
         -Xrunjdwp:transport=dt_socket,address=9447,server=y,suspend=n"
 
-   3. | Start the microservice
-      | $ mvn -P runAjsc
-      | Should see something like this: 2017-07-26
-        12:46:35.524:INFO:oejs.Server:com.att.ajsc.runner.Runner.main():
-        Started @25827ms
+   3.  Start the microservice
+
+      .. code-block:: bash
+
+       $ mvn -P runAjsc
+
+      You should see something like this:
 
-- Verify the traversal microservice
+      .. code-block:: bash
 
-   1. | Set up the widget models
-      | This will set up the postman to add widget models: `Add Widget Models.postman_collection.json <https://wiki.onap.org/download/attachments/10782088/Add%20Widget%20Models.postman_collection.json?version=2&modificationDate=1501102559000&api=v2>`__ `NamedQuery.postman_collection.json <https://wiki.onap.org/download/attachments/10782088/NamedQuery.postman_collection.json?version=2&modificationDate=1501102582000&api=v2>`__
+       2017-07-26
+       12:46:35.524:INFO:oejs.Server:com.att.ajsc.runner.Runner.main():
+       Started @25827ms
 
-   2. | Create a runner using this file:
+Verify the traversal microservice
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+   1.  Set up the widget models
+       This will set up the postman to add widget models: `Add Widget Models.postman_collection.json <https://wiki.onap.org/download/attachments/10782088/Add%20Widget%20Models.postman_collection.json?version=2&modificationDate=1501102559000&api=v2>`__ `NamedQuery.postman_collection.json <https://wiki.onap.org/download/attachments/10782088/NamedQuery.postman_collection.json?version=2&modificationDate=1501102582000&api=v2>`__
+
+   2.  Create a runner using this file:
        `models.csv <https://wiki.onap.org/download/attachments/10782088/models.csv?version=1&modificationDate=1501100140000&api=v2>`__
 
-   3. | Run the test runner
-      | |image2|
+   3.  Run the test runner
+       |image2|
+
+   4.  Add a named query called "getComponentList" (this named query is used by VID):
+
+       `NamedQuery.postman_collection.json <ificationDate=1501102582000&api=v2>`__
+       
+       |image3|
 
-   4. | Add a named query called "getComponentList" (this named query is used by VID): 
-      `NamedQuery.postman_collection.json <ificationDate=1501102582000&api=v2>`__
-      | |image3|
+   5.  Add objects:
 
-   5. | Add objects:
-        `Add Instances for Named Query.postman_collection.json <https://wiki.onap.org/download/attachments/10782088/Add%20Instances%20for%20Named%20Query.postman_collection.json?version=1&modificationDate=1501102617000&api=v2>`__ 
+       `Add Instances for Named Query.postman_collection.json <https://wiki.onap.org/download/attachments/10782088/Add%20Instances%20for%20Named%20Query.postman_collection.json?version=1&modificationDate=1501102617000&api=v2>`__ 
 
-   6. | Execute named-query:
-      `Execute Named Query.postman_collection.json <https://wiki.onap.org/download/attachments/10782088/Execute%20Named%20Query.postman_collection.json?version=1&modificationDate=1501102658000&api=v2>`__
-      | You should see something like the following:
-      | |image4|
+   6.  Execute named-query:
+       `Execute Named Query.postman_collection.json <https://wiki.onap.org/download/attachments/10782088/Execute%20Named%20Query.postman_collection.json?version=1&modificationDate=1501102658000&api=v2>`__
+       You should see something like the following:
+       |image4|
 
-- Your A&AI instance is now running, both the resources and traversal
-   microservices are working properly with a local titan graph.
+- Your A&AI instance is now running, both the resources and traversal microservices are working properly with a local titan graph.
 
 - Next: `Tutorial: Making and Testing a Schema Change in A&AI <https://wiki.onap.org/pages/viewpage.action?pageId=10783023>`__