.. This work is licensed under a Creative Commons Attribution 4.0 International License. .. http://creativecommons.org/licenses/by/4.0 Introduction ============ The purpose of this document is to explain how to build an ONAP SDNC Instance on vanilla Openstack deployment. The document begins with creation of a network, and a VM. Then, the document explains how to run the installation scripts on the VM. Finally, the document shows how to check that the SDNC installation was completed successfully. This document and logs were created on 14 November, 2017. Infrastructure setup on OpenStack --------------------------------- Create the network, we call it “ONAP-net”: :: cloud@olc-ubuntu2:~$ neutron net-create onap-net neutron CLI is deprecated and will be removed in the future. Use openstack CLI instead. Created a new network: +-----------------+--------------------------------------+ | Field | Value | +-----------------+--------------------------------------+ | admin_state_up | True | | id | 662650f0-d178-4745-b4fe-dd2cb735160c | | name | onap-net | | router:external | False | | shared | False | | status | ACTIVE | | subnets | | | tenant_id | 324b90de6e9a4ad88e93a100c2cedd5d | +-----------------+--------------------------------------+ cloud@olc-ubuntu2:~$ Create the subnet, “ONAP-subnet”: :: cloud@olc-ubuntu2:~$ neutron subnet-create --name onap-subnet onap-net 10.0.0.0/16 neutron CLI is deprecated and will be removed in the future. Use openstack CLI instead. Created a new subnet: +-------------------+----------------------------------------------+ | Field | Value | +-------------------+----------------------------------------------+ | allocation_pools | {"start": "10.0.0.2", "end": "10.0.255.254"} | | cidr | 10.0.0.0/16 | | dns_nameservers | | | enable_dhcp | True | | gateway_ip | 10.0.0.1 | | host_routes | | | id | 574df42f-15e9-4761-a4c5-e48d64f04b99 | | ip_version | 4 | | ipv6_address_mode | | | ipv6_ra_mode | | | name | onap-subnet | | network_id | 662650f0-d178-4745-b4fe-dd2cb735160c | | tenant_id | 324b90de6e9a4ad88e93a100c2cedd5d | +-------------------+----------------------------------------------+ cloud@olc-ubuntu2:~$ Boot an Ubuntu 14.04 instance, using the correct flavor name according to your Openstack : :: cloud@olc-ubuntu2:~$ nova boot --flavor n2.cw.standard-4 --image "Ubuntu 14.04" --key-name olc- key2 --nic net-name=onap-net,v4-fixed-ip=10.0.7.1 vm1-sdnc +--------------------------------------+-----------------------------------------------------+ | Property | Value | +--------------------------------------+-----------------------------------------------------+ | OS-DCF:diskConfig | MANUAL | | OS-EXT-AZ:availability_zone | | | OS-EXT-STS:power_state | 0 | | OS-EXT-STS:task_state | scheduling | | OS-EXT-STS:vm_state | building | | OS-SRV-USG:launched_at | - | | OS-SRV-USG:terminated_at | - | | accessIPv4 | | | accessIPv6 | | | config_drive | | | created | 2017-11-14T15:48:37Z | | flavor | n2.cw.standard-4 (44) | | hostId | | | id | 596e2b1f-ff09-4c8e-b3e8-fc06566306cf | | image | Ubuntu 14.04 (ac9d6735-7c2b-4ff1-90e9-b45225fd80a9) | | key_name | olc-key2 | | metadata | {} | | name | vm1-sdnc | | os-extended-volumes:volumes_attached | [] | | progress | 0 | | security_groups | default | | status | BUILD | | tenant_id | 324b90de6e9a4ad88e93a100c2cedd5d | | updated | 2017-11-14T15:48:38Z | | user_id | 24c673ecc97f4b42887a195654d6a0b9 | +--------------------------------------+-----------------------------------------------------+ cloud@olc-ubuntu2:~$ Create a floating IP and associate to the SDNC VM so that it can access internet to download needed files: :: cloud@olc-ubuntu2:~$ neutron floatingip-create public neutron CLI is deprecated and will be removed in the future. Use openstack CLI instead. Created a new floatingip: +---------------------+--------------------------------------+ | Field | Value | +---------------------+--------------------------------------+ | fixed_ip_address | | | floating_ip_address | 84.39.47.153 | | floating_network_id | b5dd7532-1533-4b9c-8bf9-e66631a9be1d | | id | eac0124f-9c92-47e5-a694-53355c06c6b2 | | port_id | | | router_id | | | status | ACTIVE | | tenant_id | 324b90de6e9a4ad88e93a100c2cedd5d | +---------------------+--------------------------------------+ cloud@olc-ubuntu2:~$ cloud@olc-ubuntu2:~$ neutron port-list neutron CLI is deprecated and will be removed in the future. Use openstack CLI instead. +--------------------------------------+--------------------------------------+-------------------+-------------------------------------------------------------------------------------+ | id | name | mac_address | fixed_ips | +--------------------------------------+--------------------------------------+-------------------+-------------------------------------------------------------------------------------+ | 5d8e8f30-a13a-417d-b5b4-f4038224364b | 5d8e8f30-a13a-417d-b5b4-f4038224364b | 02:5d:8e:8f:30:a1 | {"subnet_id": "574df42f-15e9-4761-a4c5-e48d64f04b99", "ip_address": "10.0.7.1"} | +--------------------------------------+--------------------------------------+-------------------+-------------------------------------------------------------------------------------+ cloud@olc-ubuntu2:~$ cloud@olc-ubuntu2:~$ neutron floatingip-associate eac0124f-9c92-47e5-a694-53355c06c6b25d8e8f30-a13a-417d-b5b4-f4038224364b neutron CLI is deprecated and will be removed in the future. Use openstack CLI instead. Associated floating IP eac0124f-9c92-47e5-a694-53355c06c6b2 cloud@olc-ubuntu2:~$ Add the security group to the VM in order to open needed ports for SDNC like port 22, 3000, 8282 etc ...: :: cloud@olc-ubuntu2:~$ nova add-secgroup vm1-sdnc olc-onap cloud@olc-ubuntu2:~$ Installing SDNC --------------- Connect to the new VM and change to user "root", and run the following commands to start the installation (the full logs are listed in the attached text file): :: cloud@vm1-sdnc:~$ sudo -i root@vm1-sdnc:~# mkdir -p /opt/config root@vm1-sdnc:~# root@vm1-sdnc:~# echo "https://nexus.onap.org/content/sites/raw" > /opt/config/nexus_repo.txt root@vm1-sdnc:~# echo "nexus3.onap.org:10001" > /opt/config/nexus_docker_repo.txt root@vm1-sdnc:~# echo "docker" > /opt/config/nexus_username.txt root@vm1-sdnc:~# echo "docker" > /opt/config/nexus_password.txt root@vm1-sdnc:~# echo "1.1.0-SNAPSHOT" > /opt/config/artifacts_version.txt root@vm1-sdnc:~# echo "10.0.100.1" > /opt/config/dns_ip_addr.txt root@vm1-sdnc:~# wget https://git.onap.org/integration/plain/version-manifest/src/main/resources/docker-manifest.csv root@vm1-sdnc:~# DOCKER_SDNC_VERSION=$(grep onap/sdnc-image docker-manifest.csv | awk '{v=$1; gsub(".*/*,","",$1); print ($1) }') root@vm1-sdnc:~# echo $DOCKER_SDNC_VERSION > /opt/config/docker_version.txt root@vm1-sdnc:~# echo "master" > /opt/config/gerrit_branch.txt root@vm1-sdnc:~# echo "openstack" > /opt/config/cloud_env.txt root@vm1-sdnc:~# echo "8.8.8.8" > /opt/config/external_dns.txt root@vm1-sdnc:~# echo "http://gerrit.onap.org/r/sdnc/oam.git" > /opt/config/remote_repo.txt root@vm1-sdnc:~# DOCKER_BUILDER_VERSION=$(grep dgbuilder docker-manifest.csv | awk '{v=$1; gsub(".*/*,","",$1); print ($1) }') root@vm1-sdnc:~# echo $DOCKER_BUILDER_VERSION > /opt/config/dgbuilder_version.txt root@vm1-sdnc:~# curl -k https://nexus.onap.org/content/sites/raw/org.onap.demo/boot/1.1.0- SNAPSHOT/sdnc_install.sh -o /opt/sdnc_install.sh % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 100 3701 100 3701 0 0 5196 0 --:--:-- --:--:-- --:--:-- 5190 root@vm1-sdnc:~# cd /opt root@vm1-sdnc:/opt# chmod +x sdnc_install.sh root@vm1-sdnc:/opt# ./sdnc_install.sh cp: cannot stat ‘/home/ubuntu/.ssh/authorized_keys’: No such file or directory Get:1 http://security.ubuntu.com trusty-security InRelease [65.9 kB] … output truncated … The following install logs shows the containers are coming up, meaning a successful deployment of the SDNC: :: ... truncated output ... Status: Downloaded newer image for mysql/mysql-server:5.6 Creating sdnc_db_container Creating sdnc_controller_container Creating sdnc_portal_container Creating sdnc_dgbuilder_container Creating sdnc_dmaaplistener_container Creating sdnc_ueblistener_container root@vm1-sdnc:/opt# Check that the containers are up and running: :: cloud@vm1-sdnc:~$ sudo docker container list CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES 30fd20166145 onap/sdnc-dmaap-listener-image:latest "/opt/onap/sdnc/dm..." 25 minutes ago Up 25 minutes sdnc_dmaaplistener_container 484220f3b38a onap/sdnc-ueb-listener-image:latest "/opt/onap/sdnc/ue..." 25 minutes ago Up 25 minutes sdnc_ueblistener_container 674ad3ff7f24 onap/ccsdk-dgbuilder-image:latest "/bin/bash -c 'cd ..." 25 minutes ago Up 25 minutes 0.0.0.0:3000->3100/tcp sdnc_dgbuilder_container d2a915c8e2e5 onap/admportal-sdnc-image:latest "/bin/bash -c 'cd ..." 25 minutes ago Up 25 minutes 0.0.0.0:8843->8843/tcp sdnc_portal_container a65b7fb486e7 onap/sdnc-image:latest "/opt/onap/sdnc/bi..." 25 minutes ago Up 25 minutes 0.0.0.0:8201->8101/tcp, 0.0.0.0:8282->8181/tcp sdnc_controller_container 2b9b2f5a79f8 mysql/mysql-server:5.6 "/entrypoint.sh my..." 25 minutes ago Up 25 minutes (healthy) 0.0.0.0:32768->3306/tcp sdnc_db_container cloud@vm1-sdnc:~$ Login into APIDOC Explorer and check that you can see Swagger UI interface with all the APIs: :: APIDOC Explorer URL: http://{SDNC-IP}:8282/apidoc/explorer/index.html Username: admin Password: Kp8bJ4SXszM0WXlhak3eHlcse2gAw84vaoGGmJvUy2U Login into DG Builder and check that you can see the GUI: :: DG Builder URL: http://dguser:test123@{SDNC-IP}:3000