.. This work is licensed under a Creative Commons Attribution 4.0 International License. .. http://creativecommons.org/licenses/by/4.0 Introduction ============ The purpose of this document is to explain how to build an ONAP SDNC Instance on vanilla Openstack deployment. The document begins with creation of a network, and a VM. Then, the document explains how to run the installation scripts on the VM. Finally, the document shows how to check that the SDNC installation was completed successfully. This document and logs were created on 22 November, 2018. Infrastructure setup on OpenStack --------------------------------- Create the network, we call it “ONAP-net”: :: cloud@olc-ubuntu2:~$ neutron net-create onap-net neutron CLI is deprecated and will be removed in the future. Use openstack CLI instead. Created a new network: +-----------------+--------------------------------------+ | Field | Value | +-----------------+--------------------------------------+ | admin_state_up | True | | id | 662650f0-d178-4745-b4fe-dd2cb735160c | | name | onap-net | | router:external | False | | shared | False | | status | ACTIVE | | subnets | | | tenant_id | 324b90de6e9a4ad88e93a100c2cedd5d | +-----------------+--------------------------------------+ cloud@olc-ubuntu2:~$ Create the subnet, “ONAP-subnet”: :: cloud@olc-ubuntu2:~$ neutron subnet-create --name onap-subnet onap-net 10.0.0.0/16 neutron CLI is deprecated and will be removed in the future. Use openstack CLI instead. Created a new subnet: +-------------------+----------------------------------------------+ | Field | Value | +-------------------+----------------------------------------------+ | allocation_pools | {"start": "10.0.0.2", "end": "10.0.255.254"} | | cidr | 10.0.0.0/16 | | dns_nameservers | | | enable_dhcp | True | | gateway_ip | 10.0.0.1 | | host_routes | | | id | 574df42f-15e9-4761-a4c5-e48d64f04b99 | | ip_version | 4 | | ipv6_address_mode | | | ipv6_ra_mode | | | name | onap-subnet | | network_id | 662650f0-d178-4745-b4fe-dd2cb735160c | | tenant_id | 324b90de6e9a4ad88e93a100c2cedd5d | +-------------------+----------------------------------------------+ cloud@olc-ubuntu2:~$ Boot an Ubuntu 14.04 instance, using the correct flavor name according to your Openstack : :: cloud@olc-ubuntu2:~$ nova boot --flavor n2.cw.standard-4 --image "Ubuntu 14.04" --key-name olc- key2 --nic net-name=onap-net,v4-fixed-ip=10.0.7.1 vm1-sdnc +--------------------------------------+-----------------------------------------------------+ | Property | Value | +--------------------------------------+-----------------------------------------------------+ | OS-DCF:diskConfig | MANUAL | | OS-EXT-AZ:availability_zone | | | OS-EXT-STS:power_state | 0 | | OS-EXT-STS:task_state | scheduling | | OS-EXT-STS:vm_state | building | | OS-SRV-USG:launched_at | - | | OS-SRV-USG:terminated_at | - | | accessIPv4 | | | accessIPv6 | | | config_drive | | | created | 2017-11-14T15:48:37Z | | flavor | n2.cw.standard-4 (44) | | hostId | | | id | 596e2b1f-ff09-4c8e-b3e8-fc06566306cf | | image | Ubuntu 14.04 (ac9d6735-7c2b-4ff1-90e9-b45225fd80a9) | | key_name | olc-key2 | | metadata | {} | | name | vm1-sdnc | | os-extended-volumes:volumes_attached | [] | | progress | 0 | | security_groups | default | | status | BUILD | | tenant_id | 324b90de6e9a4ad88e93a100c2cedd5d | | updated | 2017-11-14T15:48:38Z | | user_id | 24c673ecc97f4b42887a195654d6a0b9 | +--------------------------------------+-----------------------------------------------------+ cloud@olc-ubuntu2:~$ Create a floating IP and associate to the SDNC VM so that it can access internet to download needed files: :: cloud@olc-ubuntu2:~$ neutron floatingip-create public neutron CLI is deprecated and will be removed in the future. Use openstack CLI instead. Created a new floatingip: +---------------------+--------------------------------------+ | Field | Value | +---------------------+--------------------------------------+ | fixed_ip_address | | | floating_ip_address | 84.39.47.153 | | floating_network_id | b5dd7532-1533-4b9c-8bf9-e66631a9be1d | | id | eac0124f-9c92-47e5-a694-53355c06c6b2 | | port_id | | | router_id | | | status | ACTIVE | | tenant_id | 324b90de6e9a4ad88e93a100c2cedd5d | +---------------------+--------------------------------------+ cloud@olc-ubuntu2:~$ cloud@olc-ubuntu2:~$ neutron port-list neutron CLI is deprecated and will be removed in the future. Use openstack CLI instead. +--------------------------------------+--------------------------------------+-------------------+-------------------------------------------------------------------------------------+ | id | name | mac_address | fixed_ips | +--------------------------------------+--------------------------------------+-------------------+-------------------------------------------------------------------------------------+ | 5d8e8f30-a13a-417d-b5b4-f4038224364b | 5d8e8f30-a13a-417d-b5b4-f4038224364b | 02:5d:8e:8f:30:a1 | {"subnet_id": "574df42f-15e9-4761-a4c5-e48d64f04b99", "ip_address": "10.0.7.1"} | +--------------------------------------+--------------------------------------+-------------------+-------------------------------------------------------------------------------------+ cloud@olc-ubuntu2:~$ cloud@olc-ubuntu2:~$ neutron floatingip-associate eac0124f-9c92-47e5-a694-53355c06c6b25d8e8f30-a13a-417d-b5b4-f4038224364b neutron CLI is deprecated and will be removed in the future. Use openstack CLI instead. Associated floating IP eac0124f-9c92-47e5-a694-53355c06c6b2 cloud@olc-ubuntu2:~$ Add the security group to the VM in order to open needed ports for SDNC like port 22, 3000, 8282 etc ...: :: cloud@olc-ubuntu2:~$ nova add-secgroup vm1-sdnc olc-onap cloud@olc-ubuntu2:~$ Installing SDNC --------------- Connect to the new VM and change to user "root", and run the following commands to start the installation: :: # Login as root sudo -i # Clone Casablanca branch for demo Repo root@sdnc-test:~# git clone https://gerrit.onap.org/r/demo -b casablanca Cloning into 'demo'... remote: Counting objects: 10, done remote: Finding sources: 100% (10/10) remote: Total 9562 (delta 0), reused 9562 (delta 0) Receiving objects: 100% (9562/9562), 43.00 MiB | 13.84 MiB/s, done. Resolving deltas: 100% (5922/5922), done. Checking connectivity... done. root@sdnc-test:~# Use below commands to update installation environment :: # Create Configuration directory mkdir -p /opt/config # Update configuration folder with variables used during the installation awk '$1 == "artifacts_version:" {print $2}' /root/demo/heat/ONAP/onap_openstack.env > /opt/config/artifacts_version.txt awk '$1 == "sdnc_repo:" {print $2}' /root/demo/heat/ONAP/onap_openstack.env > /opt/config/remote_repo.txt awk '$1 == "sdnc_branch:" {print $2}' /root/demo/heat/ONAP/onap_openstack.env > /opt/config/gerrit_branch.txt echo "no_proxy" > /opt/config/http_proxy.txt echo "no_proxy" > /opt/config/https_proxy.txt echo "https://nexus.onap.org" > /opt/config/nexus_artifact_repo.txt echo "8.8.8.8" > /opt/config/external_dns.txt awk '$1 == "dns_ip_addr:" {print $2}' /root/demo/heat/ONAP/onap_openstack.env > /opt/config/dns_ip_addr.txt awk '$1 == "nexus_username:" {print $2}' /root/demo/heat/ONAP/onap_openstack.env > /opt/config/nexus_username.txt awk '$1 == "nexus_password:" {print $2}' /root/demo/heat/ONAP/onap_openstack.env > /opt/config/nexus_password.txt awk '$1 == "nexus_docker_repo:" {print $2}' /root/demo/heat/ONAP/onap_openstack.env > /opt/config/nexus_docker_repo.txt awk '$1 == "sdnc_docker:" {gsub("\"","",$2);print $2}' /root/demo/heat/ONAP/onap_openstack.env > /opt/config/docker_version.txt awk '$1 == "dgbuilder_docker:" {gsub("\"","",$2);print $2}' /root/demo/heat/ONAP/onap_openstack.env > /opt/config/dgbuilder_version.txt # Add host name to /etc/host to avoid warnings in openstack images echo 127.0.0.1 $(hostname) >> /etc/hosts # Install additional components apt update apt-get install -y linux-image-extra-$(uname -r) linux-image-extra-virtual apt-transport-https ca-certificates wget git ntp ntpdate make jq unzip # Enable autorestart when VM reboots chmod +x /root/demo/heat/ONAP/cloud-config/serv.sh cp /root/demo/heat/ONAP/cloud-config/serv.sh /etc/init.d update-rc.d serv.sh defaults Install docker engine :: echo "deb https://apt.dockerproject.org/repo ubuntu-$(lsb_release -cs) main" | tee /etc/apt/sources.list.d/docker.list apt-get update apt-get install -y --allow-unauthenticated docker-engine Install docker-compose & complete docker configuration :: root@sdnc-test:~# mkdir -p /opt/docker root@sdnc-test:~# curl -L "https://github.com/docker/compose/releases/download/1.16.1/docker-compose-$(uname -s)-$(uname -m)" > /opt/docker/docker-compose % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 100 8648k 100 8648k 0 0 3925k 0 0:00:02 0:00:02 --:--:-- 10.3M root@sdnc-test:~# chmod +x /opt/docker/docker-compose # Set the MTU size of docker containers to the minimum MTU size supported by vNICs root@sdnc-test:~# MTU=$(/sbin/ifconfig | grep MTU | sed 's/.*MTU://' | sed 's/ .*//' | sort -n | head -1) root@sdnc-test:~# echo "DOCKER_OPTS=\"$DNS_FLAG--mtu=$MTU\"" >> /etc/default/docker root@sdnc-test:~# cp /lib/systemd/system/docker.service /etc/systemd/system root@sdnc-test:~# sed -i "/ExecStart/s/$/ --mtu=$MTU/g" /etc/systemd/system/docker.service root@sdnc-test:~# systemctl daemon-reload root@sdnc-test:~# service docker restart # DNS IP address configuration root@sdnc-test:~# echo "nameserver $(cat /opt/config/external_dns.txt)" >> /etc/resolvconf/resolv.conf.d/head root@sdnc-test:~# resolvconf -u Copy & run installation scripts :: # Copy installation scripts to opt directory root@sdnc-test:~# cp /root/demo/heat/ONAP/cloud-config/sdnc_install.sh /opt/sdnc_install.sh root@sdnc-test:~# cp /root/demo/heat/ONAP/cloud-config/sdnc_vm_init.sh /opt/sdnc_vm_init.sh # Run installation script root@sdnc-test:~# cd /opt root@sdnc-test:~# chmod +x sdnc_install.sh root@sdnc-test:~# chmod +x sdnc_vm_init.sh root@sdnc-test:~# ./sdnc_install.sh Cloning into 'sdnc'... remote: Finding sources: 100% (8962/8962) remote: Total 8962 (delta 3999), reused 8956 (delta 3999) Receiving objects: 100% (8962/8962), 702.76 MiB | 19.20 MiB/s, done. Resolving deltas: 100% (3999/3999), done. Checking connectivity... done. Already up-to-date. Login Succeeded 1.4-STAGING-latest: Pulling from onap/sdnc-image 18d680d61657: Pull complete … output truncated … The following install logs shows the containers are coming up, meaning a successful deployment of the SDNC: :: ... truncated output ... d3565df0a804: Pull complete Digest: sha256:0ba03586c705ca8f79030586a579001c4fab3d6fa8c388b6c1c37c695645b78e Status: Downloaded newer image for mysql/mysql-server:5.6 Creating sdnc_db_container ... Creating sdnc_db_container ... done Creating sdnc_ansible_container ... Creating sdnc_ansible_container ... done Creating sdnc_controller_container ... Creating sdnc_controller_container ... done Creating sdnc_ueblistener_container ... Creating sdnc_portal_container ... Creating sdnc_dgbuilder_container ... Creating sdnc_dmaaplistener_container ... Creating sdnc_ueblistener_container Creating sdnc_portal_container Creating sdnc_dmaaplistener_container Creating sdnc_dgbuilder_container ... done Check that the containers are up and running: :: root@sdnc-test:/opt# docker container list CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES 9de71aea163a onap/ccsdk-dgbuilder-image:latest "/bin/bash -c 'cd ..." 11 minutes ago Up 11 minutes 0.0.0.0:3000->3100/tcp sdnc_dgbuilder_container adffc0e70758 onap/sdnc-dmaap-listener-image:latest "/opt/onap/sdnc/dm..." 11 minutes ago Up 11 minutes sdnc_dmaaplistener_container 53bfa2e31c44 onap/admportal-sdnc-image:latest "/bin/bash -c 'cd ..." 11 minutes ago Up 11 minutes 0.0.0.0:8843->8843/tcp sdnc_portal_container 2fd18ceb09de onap/sdnc-image:latest "/opt/onap/sdnc/bi..." 11 minutes ago Up 11 minutes 0.0.0.0:8282->8181/tcp sdnc_controller_container 3ddb85174acb onap/sdnc-ansible-server-image:latest "/opt/onap/ccsdk/s..." 11 minutes ago Up 11 minutes 0.0.0.0:32769->8000/tcp sdnc_ansible_container 4a11c393ffa3 mysql/mysql-server:5.6 "/entrypoint.sh my..." 11 minutes ago Up 11 minutes (healthy) 0.0.0.0:32768->3306/tcp sdnc_db_container root@sdnc-test:/opt# Login into APIDOC Explorer and check that you can see Swagger UI interface with all the APIs: :: APIDOC Explorer URL: http://{SDNC-IP}:8282/apidoc/explorer/index.html Username: admin Password: Kp8bJ4SXszM0WXlhak3eHlcse2gAw84vaoGGmJvUy2U Login into DG Builder and check that you can see the GUI: :: DG Builder URL: http://dguser:test123@{SDNC-IP}:3000