3 files changed, 885 insertions, 0 deletions
diff --git a/platform-logic/lcm/src/main/xml/LCM_upgrade-post-check.xml b/platform-logic/lcm/src/main/xml/LCM_upgrade-post-check.xml
new file mode 100644
index 00000000..9569433d
--- /dev/null
+++ b/platform-logic/lcm/src/main/xml/LCM_upgrade-post-check.xml
@@ -0,0 +1,295 @@
+<service-logic
+    xmlns='http://www.onap.org/sdnc/svclogic'
+    xmlns:xsi='http://www.w3.org/2001/XMLSchema-instance' xsi:schemaLocation='http://www.onap.org/sdnc/svclogic ./svclogic.xsd' module='LCM' version='${project.version}'>
+    <method rpc='upgrade-post-check' mode='sync'>
+        <block>
+            <execute plugin='org.onap.ccsdk.sli.plugins.prop.PropertiesNode' method='readProperties' >
+                <parameter name='fileName' value='%SDNC_CONFIG_DIR%/lcm-dg.properties' />
+                <parameter name='contextPrefix' value='prop' />
+            </execute>
+            <execute plugin='org.onap.ccsdk.sli.adaptors.ansible.AnsibleAdapter' method='reqExec' >
+                <parameter name='AgentUrl' value='`$prop.ansible.agenturl`'/>
+                <parameter name='User' value='`$prop.ansible.user`'/>
+                <parameter name='Password' value='`prop.ansible.password`'/>
+                <parameter name='LocalParameters' value='`$prop.ansible.lcm.localparameters`'/>
+                <parameter name='EnvParameters' value='`$upgrade-post-check-input.payload`'/>
+                <parameter name='NodeList' value='`$prop.ansible.nodelist`'/>
+                <parameter name='Timeout' value='`$prop.ansible.timeout`'/>
+                <parameter name='Version' value='`$prop.ansible.version`'/>
+                <parameter name='Id' value='`$upgrade-post-check-input.common-header.request-id`'/>
+                <parameter name='PlaybookName' value='`$prop.lcm.upgrade-post-check.playbookname`'/>
+                <outcome value='not-found'>
+                    <block>
+                        <set>
+                            <parameter name='$org.onap.ccsdk.sli.adaptors.ansible.result.code' value='200'/>
+                            <parameter name='org.onap.ccsdk.sli.adaptors.ansible.message' value='Ansible Adapter was not found'/>
+                        </set>
+                        <block>
+                            <set>
+                                <parameter name='lcm-dmaap.version' value='`$prop.lcm.dmaap.version`'/>
+                                <parameter name='lcm-dmaap.correlation-id' value='`$upgrade-post-check-input.common-header.sub-request-id`'/>
+                                <parameter name='lcm-dmaap.partition' value='`$prop.lcm.dmaap.partition`'/>
+                                <parameter name='lcm-dmaap.rpc-name' value='upgrade-post-check'/>
+                                <parameter name='lcm-dmaap.type' value='`$prop.lcm.dmaap.type`'/>
+                                <parameter name='lcm-dmaap.timestamp' value='`$upgrade-post-check-input.common-header.timestamp`'/>
+                                <parameter name='lcm-dmaap.api-ver' value='`$upgrade-post-check-input.common-header.api-ver`'/>
+                                <parameter name='lcm-dmaap.originator-id' value='`$upgrade-post-check-input.common-header.originator-id`'/>
+                                <parameter name='lcm-dmaap.request-id' value='`$upgrade-post-check-input.common-header.originator-id`'/>
+                                <parameter name='lcm-dmaap.sub-request-id' value='`$upgrade-post-check-input.common-header.sub-request-id`'/>
+                                <parameter name='lcm-dmaap.flags.mode' value='`$upgrade-post-check-input.common-header.flags.mode`'/>
+                                <parameter name='lcm-dmaap.flags.force' value='`$upgrade-post-check-input.common-header.flags.force`'/>
+                                <parameter name='lcm-dmaap.flags.ttl' value='`$upgrade-post-check-input.common-header.flags.ttl`'/>
+                                <parameter name='lcm-dmaap.payload' value='`$org.onap.appc.adapter.ansible.results`'/>
+                                <parameter name='lcm-dmaap.status.code' value='`$org.onap.ccsdk.sli.adaptors.ansible.result.code`' />
+                                <parameter name='lcm-dmaap.status.message' value='`$org.onap.ccsdk.sli.adaptors.ansible.message`'/>
+                            </set>
+                            <execute plugin='org.onap.ccsdk.sli.plugins.restapicall.RestapiCallNode' method='sendRequest' >
+                                <parameter name='templateFileName' value="`$prop.restapi.templateDir + '/' + $prop.restapi.lcm.dmaap.publish.templatefile`" />
+                                <parameter name='restapiUrl' value='`$prop.lcm.dmaap.url`' />
+                                <parameter name='restapiUser' value='`$prop.lcm.dmaap.user`' />
+                                <parameter name='restapiPassword' value='`$prop.lcm.dmaap.password`' />
+                                <parameter name='format' value='json' />
+                                <parameter name='httpMethod' value='POST' />
+                                <parameter name='contentType' value='application/json' />
+                                <parameter name="responsePrefix" value="lcm" />
+                                <outcome value='failure'>
+                                    <record plugin="org.onap.ccsdk.sli.core.sli.recording.Slf4jRecorder">
+                                        <parameter name="logger" value="message-log"/>
+                                        <parameter name="field1" value='Failed to Publish to DMaap'/>
+                                    </record>
+                                </outcome>
+                            </execute>
+                            <return status='failure'>
+                                <parameter name='error-code' value='200' />
+                                <parameter name='error-message' value='`$org.onap.ccsdk.sli.adaptors.ansible.message`' />
+                            </return>
+                        </block>
+                    </block>
+                </outcome>
+                <outcome value='failure'>
+                    <block>
+                        <set>
+                            <parameter name='lcm-dmaap.version' value='`$prop.lcm.dmaap.version`'/>
+                            <parameter name='lcm-dmaap.correlation-id' value='`$upgrade-post-check-input.common-header.sub-request-id`'/>
+                            <parameter name='lcm-dmaap.partition' value='`$prop.lcm.dmaap.partition`'/>
+                            <parameter name='lcm-dmaap.rpc-name' value='upgrade-post-check'/>
+                            <parameter name='lcm-dmaap.type' value='`$prop.lcm.dmaap.type`'/>
+                            <parameter name='lcm-dmaap.timestamp' value='`$upgrade-post-check-input.common-header.timestamp`'/>
+                            <parameter name='lcm-dmaap.api-ver' value='`$upgrade-post-check-input.common-header.api-ver`'/>
+                            <parameter name='lcm-dmaap.originator-id' value='`$upgrade-post-check-input.common-header.originator-id`'/>
+                            <parameter name='lcm-dmaap.request-id' value='`$upgrade-post-check-input.common-header.originator-id`'/>
+                            <parameter name='lcm-dmaap.sub-request-id' value='`$upgrade-post-check-input.common-header.sub-request-id`'/>
+                            <parameter name='lcm-dmaap.flags.mode' value='`$upgrade-post-check-input.common-header.flags.mode`'/>
+                            <parameter name='lcm-dmaap.flags.force' value='`$upgrade-post-check-input.common-header.flags.force`'/>
+                            <parameter name='lcm-dmaap.flags.ttl' value='`$upgrade-post-check-input.common-header.flags.ttl`'/>
+                            <parameter name='lcm-dmaap.payload' value='`$org.onap.appc.adapter.ansible.results`'/>
+                            <parameter name='lcm-dmaap.status.code' value='`$org.onap.ccsdk.sli.adaptors.ansible.result.code`' />
+                            <parameter name='lcm-dmaap.status.message' value='`$org.onap.ccsdk.sli.adaptors.ansible.message`'/>
+                        </set>
+                        <execute plugin='org.onap.ccsdk.sli.plugins.restapicall.RestapiCallNode' method='sendRequest' >
+                            <parameter name='templateFileName' value="`$prop.restapi.templateDir + '/' + $prop.restapi.lcm.dmaap.publish.templatefile`" />
+                            <parameter name='restapiUrl' value='`$prop.lcm.dmaap.url`' />
+                            <parameter name='restapiUser' value='`$prop.lcm.dmaap.user`' />
+                            <parameter name='restapiPassword' value='`$prop.lcm.dmaap.password`' />
+                            <parameter name='format' value='json' />
+                            <parameter name='httpMethod' value='POST' />
+                            <parameter name='contentType' value='application/json' />
+                            <parameter name="responsePrefix" value="lcm" />
+                            <outcome value='failure'>
+                                <record plugin="org.onap.ccsdk.sli.core.sli.recording.Slf4jRecorder">
+                                    <parameter name="logger" value="message-log"/>
+                                    <parameter name="field1" value='Failed to Publish to DMaap'/>
+                                </record>
+                            </outcome>
+                        </execute>
+                        <return status='failure'>
+                            <parameter name='error-code' value='200' />
+                            <parameter name='error-message' value='`$org.onap.ccsdk.sli.adaptors.ansible.message`' />
+                        </return>
+                    </block>
+                </outcome>
+                <outcome value='Other'>
+                    <switch test="`$org.onap.ccsdk.sli.adaptors.ansible.result.code`">
+                        <outcome value='101'>
+                            <block>
+                                <set>
+                                    <parameter name='lcm-dmaap.version' value='`$prop.lcm.dmaap.version`'/>
+                                    <parameter name='lcm-dmaap.correlation-id' value='`$upgrade-post-check-input.common-header.sub-request-id`'/>
+                                    <parameter name='lcm-dmaap.partition' value='`$prop.lcm.dmaap.partition`'/>
+                                    <parameter name='lcm-dmaap.rpc-name' value='upgrade-post-check'/>
+                                    <parameter name='lcm-dmaap.type' value='`$prop.lcm.dmaap.type`'/>
+                                    <parameter name='lcm-dmaap.timestamp' value='`$upgrade-post-check-input.common-header.timestamp`'/>
+                                    <parameter name='lcm-dmaap.api-ver' value='`$upgrade-post-check-input.common-header.api-ver`'/>
+                                    <parameter name='lcm-dmaap.originator-id' value='`$upgrade-post-check-input.common-header.originator-id`'/>
+                                    <parameter name='lcm-dmaap.request-id' value='`$upgrade-post-check-input.common-header.originator-id`'/>
+                                    <parameter name='lcm-dmaap.sub-request-id' value='`$upgrade-post-check-input.common-header.sub-request-id`'/>
+                                    <parameter name='lcm-dmaap.flags.mode' value='`$upgrade-post-check-input.common-header.flags.mode`'/>
+                                    <parameter name='lcm-dmaap.flags.force' value='`$upgrade-post-check-input.common-header.flags.force`'/>
+                                    <parameter name='lcm-dmaap.flags.ttl' value='`$upgrade-post-check-input.common-header.flags.ttl`'/>
+                                    <parameter name='lcm-dmaap.payload' value='`$org.onap.appc.adapter.ansible.results`'/>
+                                    <parameter name='lcm-dmaap.status.code' value='`$org.onap.ccsdk.sli.adaptors.ansible.result.code`' />
+                                    <parameter name='lcm-dmaap.status.message' value='`$org.onap.ccsdk.sli.adaptors.ansible.message`'/>
+                                </set>
+                                <execute plugin='org.onap.ccsdk.sli.plugins.restapicall.RestapiCallNode' method='sendRequest' >
+                                    <parameter name='templateFileName' value="`$prop.restapi.templateDir + '/' + $prop.restapi.lcm.dmaap.publish.templatefile`" />
+                                    <parameter name='restapiUrl' value='`$prop.lcm.dmaap.url`' />
+                                    <parameter name='restapiUser' value='`$prop.lcm.dmaap.user`' />
+                                    <parameter name='restapiPassword' value='`$prop.lcm.dmaap.password`' />
+                                    <parameter name='format' value='json' />
+                                    <parameter name='httpMethod' value='POST' />
+                                    <parameter name='contentType' value='application/json' />
+                                    <parameter name="responsePrefix" value="lcm" />
+                                    <outcome value='failure'>
+                                        <record plugin="org.onap.ccsdk.sli.core.sli.recording.Slf4jRecorder">
+                                            <parameter name="logger" value="message-log"/>
+                                            <parameter name="field1" value='Failed to Publish to DMaap'/>
+                                        </record>
+                                    </outcome>
+                                </execute>
+                                <return status='failure'>
+                                    <parameter name='error-code' value='200' />
+                                    <parameter name='error-message' value='`$org.onap.ccsdk.sli.adaptors.ansible.message`' />
+                                </return>
+                            </block>
+                        </outcome>
+                        <outcome value='500'>
+                            <block>
+                                <set>
+                                    <parameter name='lcm-dmaap.version' value='`$prop.lcm.dmaap.version`'/>
+                                    <parameter name='lcm-dmaap.correlation-id' value='`$upgrade-post-check-input.common-header.sub-request-id`'/>
+                                    <parameter name='lcm-dmaap.partition' value='`$prop.lcm.dmaap.partition`'/>
+                                    <parameter name='lcm-dmaap.rpc-name' value='upgrade-post-check'/>
+                                    <parameter name='lcm-dmaap.type' value='`$prop.lcm.dmaap.type`'/>
+                                    <parameter name='lcm-dmaap.timestamp' value='`$upgrade-post-check-input.common-header.timestamp`'/>
+                                    <parameter name='lcm-dmaap.api-ver' value='`$upgrade-post-check-input.common-header.api-ver`'/>
+                                    <parameter name='lcm-dmaap.originator-id' value='`$upgrade-post-check-input.common-header.originator-id`'/>
+                                    <parameter name='lcm-dmaap.request-id' value='`$upgrade-post-check-input.common-header.originator-id`'/>
+                                    <parameter name='lcm-dmaap.sub-request-id' value='`$upgrade-post-check-input.common-header.sub-request-id`'/>
+                                    <parameter name='lcm-dmaap.flags.mode' value='`$upgrade-post-check-input.common-header.flags.mode`'/>
+                                    <parameter name='lcm-dmaap.flags.force' value='`$upgrade-post-check-input.common-header.flags.force`'/>
+                                    <parameter name='lcm-dmaap.flags.ttl' value='`$upgrade-post-check-input.common-header.flags.ttl`'/>
+                                    <parameter name='lcm-dmaap.payload' value='`$org.onap.appc.adapter.ansible.results`'/>
+                                    <parameter name='lcm-dmaap.status.code' value='`$org.onap.ccsdk.sli.adaptors.ansible.result.code`' />
+                                    <parameter name='lcm-dmaap.status.message' value='`$org.onap.ccsdk.sli.adaptors.ansible.message`'/>
+                                </set>
+                                <execute plugin='org.onap.ccsdk.sli.plugins.restapicall.RestapiCallNode' method='sendRequest' >
+                                    <parameter name='templateFileName' value="`$prop.restapi.templateDir + '/' + $prop.restapi.lcm.dmaap.publish.templatefile`" />
+                                    <parameter name='restapiUrl' value='`$prop.lcm.dmaap.url`' />
+                                    <parameter name='restapiUser' value='`$prop.lcm.dmaap.user`' />
+                                    <parameter name='restapiPassword' value='`$prop.lcm.dmaap.password`' />
+                                    <parameter name='format' value='json' />
+                                    <parameter name='httpMethod' value='POST' />
+                                    <parameter name='contentType' value='application/json' />
+                                    <parameter name="responsePrefix" value="lcm" />
+                                    <outcome value='failure'>
+                                        <record plugin="org.onap.ccsdk.sli.core.sli.recording.Slf4jRecorder">
+                                            <parameter name="logger" value="message-log"/>
+                                            <parameter name="field1" value='Failed to Publish to DMaap'/>
+                                        </record>
+                                    </outcome>
+                                </execute>
+                                <return status='failure'>
+                                    <parameter name='error-code' value='200' />
+                                    <parameter name='error-message' value='`$org.onap.ccsdk.sli.adaptors.ansible.message`' />
+                                </return>
+                            </block>
+                        </outcome>
+                        <outcome value='100'>
+                            <execute plugin='org.onap.ccsdk.sli.adaptors.ansible.AnsibleAdapter' method='reqExecResult' >
+                                <parameter name='AgentUrl' value='`$prop.ansible.agenturl`'/>
+                                <parameter name='User' value='`$prop.ansible.user`'/>
+                                <parameter name='Password' value='`$prop.ansible.password`'/>
+                                <parameter name='Id' value='`$upgrade-post-check-input.common-header.request-id`'/>
+                                <parameter name='PlaybookName' value='`$prop.lcm.upgrade-post-check.playbookname`'/>
+                                <outcome value='failure'>
+                                    <block>
+                                        <set>
+                                            <parameter name='lcm-dmaap.version' value='`$prop.lcm.dmaap.version`'/>
+                                            <parameter name='lcm-dmaap.correlation-id' value='`$upgrade-post-check-input.common-header.sub-request-id`'/>
+                                            <parameter name='lcm-dmaap.partition' value='`$prop.lcm.dmaap.partition`'/>
+                                            <parameter name='lcm-dmaap.rpc-name' value='upgrade-post-check'/>
+                                            <parameter name='lcm-dmaap.type' value='`$prop.lcm.dmaap.type`'/>
+                                            <parameter name='lcm-dmaap.timestamp' value='`$upgrade-post-check-input.common-header.timestamp`'/>
+                                            <parameter name='lcm-dmaap.api-ver' value='`$upgrade-post-check-input.common-header.api-ver`'/>
+                                            <parameter name='lcm-dmaap.originator-id' value='`$upgrade-post-check-input.common-header.originator-id`'/>
+                                            <parameter name='lcm-dmaap.request-id' value='`$upgrade-post-check-input.common-header.originator-id`'/>
+                                            <parameter name='lcm-dmaap.sub-request-id' value='`$upgrade-post-check-input.common-header.sub-request-id`'/>
+                                            <parameter name='lcm-dmaap.flags.mode' value='`$upgrade-post-check-input.common-header.flags.mode`'/>
+                                            <parameter name='lcm-dmaap.flags.force' value='`$upgrade-post-check-input.common-header.flags.force`'/>
+                                            <parameter name='lcm-dmaap.flags.ttl' value='`$upgrade-post-check-input.common-header.flags.ttl`'/>
+                                            <parameter name='lcm-dmaap.payload' value='`$org.onap.appc.adapter.ansible.results`'/>
+                                            <parameter name='lcm-dmaap.status.code' value='`$org.onap.ccsdk.sli.adaptors.ansible.result.code`' />
+                                            <parameter name='lcm-dmaap.status.message' value='`$org.onap.ccsdk.sli.adaptors.ansible.message`'/>
+                                        </set>
+                                        <execute plugin='org.onap.ccsdk.sli.plugins.restapicall.RestapiCallNode' method='sendRequest' >
+                                            <parameter name='templateFileName' value="`$prop.restapi.templateDir + '/' + $prop.restapi.lcm.dmaap.publish.templatefile`" />
+                                            <parameter name='restapiUrl' value='`$prop.lcm.dmaap.url`' />
+                                            <parameter name='restapiUser' value='`$prop.lcm.dmaap.user`' />
+                                            <parameter name='restapiPassword' value='`$prop.lcm.dmaap.password`' />
+                                            <parameter name='format' value='json' />
+                                            <parameter name='httpMethod' value='POST' />
+                                            <parameter name='contentType' value='application/json' />
+                                            <parameter name="responsePrefix" value="lcm" />
+                                            <outcome value='failure'>
+                                                <record plugin="org.onap.ccsdk.sli.core.sli.recording.Slf4jRecorder">
+                                                    <parameter name="logger" value="message-log"/>
+                                                    <parameter name="field1" value='Failed to Publish to DMaap'/>
+                                                </record>
+                                            </outcome>
+                                        </execute>
+                                        <return status='failure'>
+                                            <parameter name='error-code' value='200' />
+                                            <parameter name='error-message' value='`$org.onap.ccsdk.sli.adaptors.ansible.message`' />
+                                        </return>
+                                    </block>
+                                </outcome>
+                                <outcome value='success'>
+                                    <block>
+                                        <set>
+                                            <parameter name='lcm-dmaap.version' value='`$prop.lcm.dmaap.version`'/>
+                                            <parameter name='lcm-dmaap.correlation-id' value='`$upgrade-post-check-input.common-header.sub-request-id`'/>
+                                            <parameter name='lcm-dmaap.partition' value='`$prop.lcm.dmaap.partition`'/>
+                                            <parameter name='lcm-dmaap.rpc-name' value='upgrade-post-check'/>
+                                            <parameter name='lcm-dmaap.type' value='`$prop.lcm.dmaap.type`'/>
+                                            <parameter name='lcm-dmaap.timestamp' value='`$upgrade-post-check-input.common-header.timestamp`'/>
+                                            <parameter name='lcm-dmaap.api-ver' value='`$upgrade-post-check-input.common-header.api-ver`'/>
+                                            <parameter name='lcm-dmaap.originator-id' value='`$upgrade-post-check-input.common-header.originator-id`'/>
+                                            <parameter name='lcm-dmaap.request-id' value='`$upgrade-post-check-input.common-header.originator-id`'/>
+                                            <parameter name='lcm-dmaap.sub-request-id' value='`$upgrade-post-check-input.common-header.sub-request-id`'/>
+                                            <parameter name='lcm-dmaap.flags.mode' value='`$upgrade-post-check-input.common-header.flags.mode`'/>
+                                            <parameter name='lcm-dmaap.flags.force' value='`$upgrade-post-check-input.common-header.flags.force`'/>
+                                            <parameter name='lcm-dmaap.flags.ttl' value='`$upgrade-post-check-input.common-header.flags.ttl`'/>
+                                            <parameter name='lcm-dmaap.payload' value='`$org.onap.appc.adapter.ansible.results`'/>
+                                            <parameter name='lcm-dmaap.status.code' value='`$org.onap.ccsdk.sli.adaptors.ansible.result.code`' />
+                                            <parameter name='lcm-dmaap.status.message' value='`$org.onap.ccsdk.sli.adaptors.ansible.message`'/>
+                                        </set>
+                                        <execute plugin='org.onap.ccsdk.sli.plugins.restapicall.RestapiCallNode' method='sendRequest' >
+                                            <parameter name='templateFileName' value="`$prop.restapi.templateDir + '/' + $prop.restapi.lcm.dmaap.publish.templatefile`" />
+                                            <parameter name='restapiUrl' value='`$prop.lcm.dmaap.url`' />
+                                            <parameter name='restapiUser' value='`$prop.lcm.dmaap.user`' />
+                                            <parameter name='restapiPassword' value='`$prop.lcm.dmaap.password`' />
+                                            <parameter name='format' value='json' />
+                                            <parameter name='httpMethod' value='POST' />
+                                            <parameter name='contentType' value='application/json' />
+                                            <parameter name="responsePrefix" value="lcm" />
+                                            <outcome value='failure'>
+                                                <record plugin="org.onap.ccsdk.sli.core.sli.recording.Slf4jRecorder">
+                                                    <parameter name="logger" value="message-log"/>
+                                                    <parameter name="field1" value='Failed to Publish to DMaap'/>
+                                                </record>
+                                            </outcome>
+                                        </execute>
+                                        <return status='success'>
+                                            <parameter name='status.code' value='`$org.onap.ccsdk.sli.adaptors.ansible.result.code`' />
+                                            <parameter name='status.message' value='`$org.onap.ccsdk.sli.adaptors.ansible.message`'/>
+                                        </return>
+                                    </block>
+                                </outcome>
+                            </execute>
+                        </outcome>
+                    </switch>
+                </outcome>
+            </execute>
+        </block>
+    </method>
+</service-logic>
+\ No newline at end of file
diff --git a/platform-logic/lcm/src/main/xml/LCM_upgrade-pre-check.xml b/platform-logic/lcm/src/main/xml/LCM_upgrade-pre-check.xml
new file mode 100644
index 00000000..da83a54d
--- /dev/null
+++ b/platform-logic/lcm/src/main/xml/LCM_upgrade-pre-check.xml
@@ -0,0 +1,295 @@
+<service-logic
+    xmlns='http://www.onap.org/sdnc/svclogic'
+    xmlns:xsi='http://www.w3.org/2001/XMLSchema-instance' xsi:schemaLocation='http://www.onap.org/sdnc/svclogic ./svclogic.xsd' module='LCM' version='${project.version}'>
+    <method rpc='upgrade-pre-check' mode='sync'>
+        <block>
+            <execute plugin='org.onap.ccsdk.sli.plugins.prop.PropertiesNode' method='readProperties' >
+                <parameter name='fileName' value='%SDNC_CONFIG_DIR%/lcm-dg.properties' />
+                <parameter name='contextPrefix' value='prop' />
+            </execute>
+            <execute plugin='org.onap.ccsdk.sli.adaptors.ansible.AnsibleAdapter' method='reqExec' >
+                <parameter name='AgentUrl' value='`$prop.ansible.agenturl`'/>
+                <parameter name='User' value='`$prop.ansible.user`'/>
+                <parameter name='Password' value='`prop.ansible.password`'/>
+                <parameter name='LocalParameters' value='`$prop.ansible.lcm.localparameters`'/>
+                <parameter name='EnvParameters' value='`$upgrade-pre-check-input.payload`'/>
+                <parameter name='NodeList' value='`$prop.ansible.nodelist`'/>
+                <parameter name='Timeout' value='`$prop.ansible.timeout`'/>
+                <parameter name='Version' value='`$prop.ansible.version`'/>
+                <parameter name='Id' value='`$upgrade-pre-check-input.common-header.request-id`'/>
+                <parameter name='PlaybookName' value='`$prop.lcm.upgrade-pre-check.playbookname`'/>
+                <outcome value='not-found'>
+                    <block>
+                        <set>
+                            <parameter name='$org.onap.ccsdk.sli.adaptors.ansible.result.code' value='200'/>
+                            <parameter name='org.onap.ccsdk.sli.adaptors.ansible.message' value='Ansible Adapter was not found'/>
+                        </set>
+                        <block>
+                            <set>
+                                <parameter name='lcm-dmaap.version' value='`$prop.lcm.dmaap.version`'/>
+                                <parameter name='lcm-dmaap.correlation-id' value='`$upgrade-pre-check-input.common-header.sub-request-id`'/>
+                                <parameter name='lcm-dmaap.partition' value='`$prop.lcm.dmaap.partition`'/>
+                                <parameter name='lcm-dmaap.rpc-name' value='upgrade-pre-check'/>
+                                <parameter name='lcm-dmaap.type' value='`$prop.lcm.dmaap.type`'/>
+                                <parameter name='lcm-dmaap.timestamp' value='`$upgrade-pre-check-input.common-header.timestamp`'/>
+                                <parameter name='lcm-dmaap.api-ver' value='`$upgrade-pre-check-input.common-header.api-ver`'/>
+                                <parameter name='lcm-dmaap.originator-id' value='`$upgrade-pre-check-input.common-header.originator-id`'/>
+                                <parameter name='lcm-dmaap.request-id' value='`$upgrade-pre-check-input.common-header.originator-id`'/>
+                                <parameter name='lcm-dmaap.sub-request-id' value='`$upgrade-pre-check-input.common-header.sub-request-id`'/>
+                                <parameter name='lcm-dmaap.flags.mode' value='`$upgrade-pre-check-input.common-header.flags.mode`'/>
+                                <parameter name='lcm-dmaap.flags.force' value='`$upgrade-pre-check-input.common-header.flags.force`'/>
+                                <parameter name='lcm-dmaap.flags.ttl' value='`$upgrade-pre-check-input.common-header.flags.ttl`'/>
+                                <parameter name='lcm-dmaap.payload' value='`$org.onap.appc.adapter.ansible.results`'/>
+                                <parameter name='lcm-dmaap.status.code' value='`$org.onap.ccsdk.sli.adaptors.ansible.result.code`' />
+                                <parameter name='lcm-dmaap.status.message' value='`$org.onap.ccsdk.sli.adaptors.ansible.message`'/>
+                            </set>
+                            <execute plugin='org.onap.ccsdk.sli.plugins.restapicall.RestapiCallNode' method='sendRequest' >
+                                <parameter name='templateFileName' value="`$prop.restapi.templateDir + '/' + $prop.restapi.lcm.dmaap.publish.templatefile`" />
+                                <parameter name='restapiUrl' value='`$prop.lcm.dmaap.url`' />
+                                <parameter name='restapiUser' value='`$prop.lcm.dmaap.user`' />
+                                <parameter name='restapiPassword' value='`$prop.lcm.dmaap.password`' />
+                                <parameter name='format' value='json' />
+                                <parameter name='httpMethod' value='POST' />
+                                <parameter name='contentType' value='application/json' />
+                                <parameter name="responsePrefix" value="lcm" />
+                                <outcome value='failure'>
+                                    <record plugin="org.onap.ccsdk.sli.core.sli.recording.Slf4jRecorder">
+                                        <parameter name="logger" value="message-log"/>
+                                        <parameter name="field1" value='Failed to Publish to DMaap'/>
+                                    </record>
+                                </outcome>
+                            </execute>
+                            <return status='failure'>
+                                <parameter name='error-code' value='200' />
+                                <parameter name='error-message' value='`$org.onap.ccsdk.sli.adaptors.ansible.message`' />
+                            </return>
+                        </block>
+                    </block>
+                </outcome>
+                <outcome value='failure'>
+                    <block>
+                        <set>
+                            <parameter name='lcm-dmaap.version' value='`$prop.lcm.dmaap.version`'/>
+                            <parameter name='lcm-dmaap.correlation-id' value='`$upgrade-pre-check-input.common-header.sub-request-id`'/>
+                            <parameter name='lcm-dmaap.partition' value='`$prop.lcm.dmaap.partition`'/>
+                            <parameter name='lcm-dmaap.rpc-name' value='upgrade-pre-check'/>
+                            <parameter name='lcm-dmaap.type' value='`$prop.lcm.dmaap.type`'/>
+                            <parameter name='lcm-dmaap.timestamp' value='`$upgrade-pre-check-input.common-header.timestamp`'/>
+                            <parameter name='lcm-dmaap.api-ver' value='`$upgrade-pre-check-input.common-header.api-ver`'/>
+                            <parameter name='lcm-dmaap.originator-id' value='`$upgrade-pre-check-input.common-header.originator-id`'/>
+                            <parameter name='lcm-dmaap.request-id' value='`$upgrade-pre-check-input.common-header.originator-id`'/>
+                            <parameter name='lcm-dmaap.sub-request-id' value='`$upgrade-pre-check-input.common-header.sub-request-id`'/>
+                            <parameter name='lcm-dmaap.flags.mode' value='`$upgrade-pre-check-input.common-header.flags.mode`'/>
+                            <parameter name='lcm-dmaap.flags.force' value='`$upgrade-pre-check-input.common-header.flags.force`'/>
+                            <parameter name='lcm-dmaap.flags.ttl' value='`$upgrade-pre-check-input.common-header.flags.ttl`'/>
+                            <parameter name='lcm-dmaap.payload' value='`$org.onap.appc.adapter.ansible.results`'/>
+                            <parameter name='lcm-dmaap.status.code' value='`$org.onap.ccsdk.sli.adaptors.ansible.result.code`' />
+                            <parameter name='lcm-dmaap.status.message' value='`$org.onap.ccsdk.sli.adaptors.ansible.message`'/>
+                        </set>
+                        <execute plugin='org.onap.ccsdk.sli.plugins.restapicall.RestapiCallNode' method='sendRequest' >
+                            <parameter name='templateFileName' value="`$prop.restapi.templateDir + '/' + $prop.restapi.lcm.dmaap.publish.templatefile`" />
+                            <parameter name='restapiUrl' value='`$prop.lcm.dmaap.url`' />
+                            <parameter name='restapiUser' value='`$prop.lcm.dmaap.user`' />
+                            <parameter name='restapiPassword' value='`$prop.lcm.dmaap.password`' />
+                            <parameter name='format' value='json' />
+                            <parameter name='httpMethod' value='POST' />
+                            <parameter name='contentType' value='application/json' />
+                            <parameter name="responsePrefix" value="lcm" />
+                            <outcome value='failure'>
+                                <record plugin="org.onap.ccsdk.sli.core.sli.recording.Slf4jRecorder">
+                                    <parameter name="logger" value="message-log"/>
+                                    <parameter name="field1" value='Failed to Publish to DMaap'/>
+                                </record>
+                            </outcome>
+                        </execute>
+                        <return status='failure'>
+                            <parameter name='error-code' value='200' />
+                            <parameter name='error-message' value='`$org.onap.ccsdk.sli.adaptors.ansible.message`' />
+                        </return>
+                    </block>
+                </outcome>
+                <outcome value='Other'>
+                    <switch test="`$org.onap.ccsdk.sli.adaptors.ansible.result.code`">
+                        <outcome value='101'>
+                            <block>
+                                <set>
+                                    <parameter name='lcm-dmaap.version' value='`$prop.lcm.dmaap.version`'/>
+                                    <parameter name='lcm-dmaap.correlation-id' value='`$upgrade-pre-check-input.common-header.sub-request-id`'/>
+                                    <parameter name='lcm-dmaap.partition' value='`$prop.lcm.dmaap.partition`'/>
+                                    <parameter name='lcm-dmaap.rpc-name' value='upgrade-pre-check'/>
+                                    <parameter name='lcm-dmaap.type' value='`$prop.lcm.dmaap.type`'/>
+                                    <parameter name='lcm-dmaap.timestamp' value='`$upgrade-pre-check-input.common-header.timestamp`'/>
+                                    <parameter name='lcm-dmaap.api-ver' value='`$upgrade-pre-check-input.common-header.api-ver`'/>
+                                    <parameter name='lcm-dmaap.originator-id' value='`$upgrade-pre-check-input.common-header.originator-id`'/>
+                                    <parameter name='lcm-dmaap.request-id' value='`$upgrade-pre-check-input.common-header.originator-id`'/>
+                                    <parameter name='lcm-dmaap.sub-request-id' value='`$upgrade-pre-check-input.common-header.sub-request-id`'/>
+                                    <parameter name='lcm-dmaap.flags.mode' value='`$upgrade-pre-check-input.common-header.flags.mode`'/>
+                                    <parameter name='lcm-dmaap.flags.force' value='`$upgrade-pre-check-input.common-header.flags.force`'/>
+                                    <parameter name='lcm-dmaap.flags.ttl' value='`$upgrade-pre-check-input.common-header.flags.ttl`'/>
+                                    <parameter name='lcm-dmaap.payload' value='`$org.onap.appc.adapter.ansible.results`'/>
+                                    <parameter name='lcm-dmaap.status.code' value='`$org.onap.ccsdk.sli.adaptors.ansible.result.code`' />
+                                    <parameter name='lcm-dmaap.status.message' value='`$org.onap.ccsdk.sli.adaptors.ansible.message`'/>
+                                </set>
+                                <execute plugin='org.onap.ccsdk.sli.plugins.restapicall.RestapiCallNode' method='sendRequest' >
+                                    <parameter name='templateFileName' value="`$prop.restapi.templateDir + '/' + $prop.restapi.lcm.dmaap.publish.templatefile`" />
+                                    <parameter name='restapiUrl' value='`$prop.lcm.dmaap.url`' />
+                                    <parameter name='restapiUser' value='`$prop.lcm.dmaap.user`' />
+                                    <parameter name='restapiPassword' value='`$prop.lcm.dmaap.password`' />
+                                    <parameter name='format' value='json' />
+                                    <parameter name='httpMethod' value='POST' />
+                                    <parameter name='contentType' value='application/json' />
+                                    <parameter name="responsePrefix" value="lcm" />
+                                    <outcome value='failure'>
+                                        <record plugin="org.onap.ccsdk.sli.core.sli.recording.Slf4jRecorder">
+                                            <parameter name="logger" value="message-log"/>
+                                            <parameter name="field1" value='Failed to Publish to DMaap'/>
+                                        </record>
+                                    </outcome>
+                                </execute>
+                                <return status='failure'>
+                                    <parameter name='error-code' value='200' />
+                                    <parameter name='error-message' value='`$org.onap.ccsdk.sli.adaptors.ansible.message`' />
+                                </return>
+                            </block>
+                        </outcome>
+                        <outcome value='500'>
+                            <block>
+                                <set>
+                                    <parameter name='lcm-dmaap.version' value='`$prop.lcm.dmaap.version`'/>
+                                    <parameter name='lcm-dmaap.correlation-id' value='`$upgrade-pre-check-input.common-header.sub-request-id`'/>
+                                    <parameter name='lcm-dmaap.partition' value='`$prop.lcm.dmaap.partition`'/>
+                                    <parameter name='lcm-dmaap.rpc-name' value='upgrade-pre-check'/>
+                                    <parameter name='lcm-dmaap.type' value='`$prop.lcm.dmaap.type`'/>
+                                    <parameter name='lcm-dmaap.timestamp' value='`$upgrade-pre-check-input.common-header.timestamp`'/>
+                                    <parameter name='lcm-dmaap.api-ver' value='`$upgrade-pre-check-input.common-header.api-ver`'/>
+                                    <parameter name='lcm-dmaap.originator-id' value='`$upgrade-pre-check-input.common-header.originator-id`'/>
+                                    <parameter name='lcm-dmaap.request-id' value='`$upgrade-pre-check-input.common-header.originator-id`'/>
+                                    <parameter name='lcm-dmaap.sub-request-id' value='`$upgrade-pre-check-input.common-header.sub-request-id`'/>
+                                    <parameter name='lcm-dmaap.flags.mode' value='`$upgrade-pre-check-input.common-header.flags.mode`'/>
+                                    <parameter name='lcm-dmaap.flags.force' value='`$upgrade-pre-check-input.common-header.flags.force`'/>
+                                    <parameter name='lcm-dmaap.flags.ttl' value='`$upgrade-pre-check-input.common-header.flags.ttl`'/>
+                                    <parameter name='lcm-dmaap.payload' value='`$org.onap.appc.adapter.ansible.results`'/>
+                                    <parameter name='lcm-dmaap.status.code' value='`$org.onap.ccsdk.sli.adaptors.ansible.result.code`' />
+                                    <parameter name='lcm-dmaap.status.message' value='`$org.onap.ccsdk.sli.adaptors.ansible.message`'/>
+                                </set>
+                                <execute plugin='org.onap.ccsdk.sli.plugins.restapicall.RestapiCallNode' method='sendRequest' >
+                                    <parameter name='templateFileName' value="`$prop.restapi.templateDir + '/' + $prop.restapi.lcm.dmaap.publish.templatefile`" />
+                                    <parameter name='restapiUrl' value='`$prop.lcm.dmaap.url`' />
+                                    <parameter name='restapiUser' value='`$prop.lcm.dmaap.user`' />
+                                    <parameter name='restapiPassword' value='`$prop.lcm.dmaap.password`' />
+                                    <parameter name='format' value='json' />
+                                    <parameter name='httpMethod' value='POST' />
+                                    <parameter name='contentType' value='application/json' />
+                                    <parameter name="responsePrefix" value="lcm" />
+                                    <outcome value='failure'>
+                                        <record plugin="org.onap.ccsdk.sli.core.sli.recording.Slf4jRecorder">
+                                            <parameter name="logger" value="message-log"/>
+                                            <parameter name="field1" value='Failed to Publish to DMaap'/>
+                                        </record>
+                                    </outcome>
+                                </execute>
+                                <return status='failure'>
+                                    <parameter name='error-code' value='200' />
+                                    <parameter name='error-message' value='`$org.onap.ccsdk.sli.adaptors.ansible.message`' />
+                                </return>
+                            </block>
+                        </outcome>
+                        <outcome value='100'>
+                            <execute plugin='org.onap.ccsdk.sli.adaptors.ansible.AnsibleAdapter' method='reqExecResult' >
+                                <parameter name='AgentUrl' value='`$prop.ansible.agenturl`'/>
+                                <parameter name='User' value='`$prop.ansible.user`'/>
+                                <parameter name='Password' value='`$prop.ansible.password`'/>
+                                <parameter name='Id' value='`$upgrade-pre-check-input.common-header.request-id`'/>
+                                <parameter name='PlaybookName' value='`$prop.lcm.upgrade-pre-check.playbookname`'/>
+                                <outcome value='failure'>
+                                    <block>
+                                        <set>
+                                            <parameter name='lcm-dmaap.version' value='`$prop.lcm.dmaap.version`'/>
+                                            <parameter name='lcm-dmaap.correlation-id' value='`$upgrade-pre-check-input.common-header.sub-request-id`'/>
+                                            <parameter name='lcm-dmaap.partition' value='`$prop.lcm.dmaap.partition`'/>
+                                            <parameter name='lcm-dmaap.rpc-name' value='upgrade-pre-check'/>
+                                            <parameter name='lcm-dmaap.type' value='`$prop.lcm.dmaap.type`'/>
+                                            <parameter name='lcm-dmaap.timestamp' value='`$upgrade-pre-check-input.common-header.timestamp`'/>
+                                            <parameter name='lcm-dmaap.api-ver' value='`$upgrade-pre-check-input.common-header.api-ver`'/>
+                                            <parameter name='lcm-dmaap.originator-id' value='`$upgrade-pre-check-input.common-header.originator-id`'/>
+                                            <parameter name='lcm-dmaap.request-id' value='`$upgrade-pre-check-input.common-header.originator-id`'/>
+                                            <parameter name='lcm-dmaap.sub-request-id' value='`$upgrade-pre-check-input.common-header.sub-request-id`'/>
+                                            <parameter name='lcm-dmaap.flags.mode' value='`$upgrade-pre-check-input.common-header.flags.mode`'/>
+                                            <parameter name='lcm-dmaap.flags.force' value='`$upgrade-pre-check-input.common-header.flags.force`'/>
+                                            <parameter name='lcm-dmaap.flags.ttl' value='`$upgrade-pre-check-input.common-header.flags.ttl`'/>
+                                            <parameter name='lcm-dmaap.payload' value='`$org.onap.appc.adapter.ansible.results`'/>
+                                            <parameter name='lcm-dmaap.status.code' value='`$org.onap.ccsdk.sli.adaptors.ansible.result.code`' />
+                                            <parameter name='lcm-dmaap.status.message' value='`$org.onap.ccsdk.sli.adaptors.ansible.message`'/>
+                                        </set>
+                                        <execute plugin='org.onap.ccsdk.sli.plugins.restapicall.RestapiCallNode' method='sendRequest' >
+                                            <parameter name='templateFileName' value="`$prop.restapi.templateDir + '/' + $prop.restapi.lcm.dmaap.publish.templatefile`" />
+                                            <parameter name='restapiUrl' value='`$prop.lcm.dmaap.url`' />
+                                            <parameter name='restapiUser' value='`$prop.lcm.dmaap.user`' />
+                                            <parameter name='restapiPassword' value='`$prop.lcm.dmaap.password`' />
+                                            <parameter name='format' value='json' />
+                                            <parameter name='httpMethod' value='POST' />
+                                            <parameter name='contentType' value='application/json' />
+                                            <parameter name="responsePrefix" value="lcm" />
+                                            <outcome value='failure'>
+                                                <record plugin="org.onap.ccsdk.sli.core.sli.recording.Slf4jRecorder">
+                                                    <parameter name="logger" value="message-log"/>
+                                                    <parameter name="field1" value='Failed to Publish to DMaap'/>
+                                                </record>
+                                            </outcome>
+                                        </execute>
+                                        <return status='failure'>
+                                            <parameter name='error-code' value='200' />
+                                            <parameter name='error-message' value='`$org.onap.ccsdk.sli.adaptors.ansible.message`' />
+                                        </return>
+                                    </block>
+                                </outcome>
+                                <outcome value='success'>
+                                    <block>
+                                        <set>
+                                            <parameter name='lcm-dmaap.version' value='`$prop.lcm.dmaap.version`'/>
+                                            <parameter name='lcm-dmaap.correlation-id' value='`$upgrade-pre-check-input.common-header.sub-request-id`'/>
+                                            <parameter name='lcm-dmaap.partition' value='`$prop.lcm.dmaap.partition`'/>
+                                            <parameter name='lcm-dmaap.rpc-name' value='upgrade-pre-check'/>
+                                            <parameter name='lcm-dmaap.type' value='`$prop.lcm.dmaap.type`'/>
+                                            <parameter name='lcm-dmaap.timestamp' value='`$upgrade-pre-check-input.common-header.timestamp`'/>
+                                            <parameter name='lcm-dmaap.api-ver' value='`$upgrade-pre-check-input.common-header.api-ver`'/>
+                                            <parameter name='lcm-dmaap.originator-id' value='`$upgrade-pre-check-input.common-header.originator-id`'/>
+                                            <parameter name='lcm-dmaap.request-id' value='`$upgrade-pre-check-input.common-header.originator-id`'/>
+                                            <parameter name='lcm-dmaap.sub-request-id' value='`$upgrade-pre-check-input.common-header.sub-request-id`'/>
+                                            <parameter name='lcm-dmaap.flags.mode' value='`$upgrade-pre-check-input.common-header.flags.mode`'/>
+                                            <parameter name='lcm-dmaap.flags.force' value='`$upgrade-pre-check-input.common-header.flags.force`'/>
+                                            <parameter name='lcm-dmaap.flags.ttl' value='`$upgrade-pre-check-input.common-header.flags.ttl`'/>
+                                            <parameter name='lcm-dmaap.payload' value='`$org.onap.appc.adapter.ansible.results`'/>
+                                            <parameter name='lcm-dmaap.status.code' value='`$org.onap.ccsdk.sli.adaptors.ansible.result.code`' />
+                                            <parameter name='lcm-dmaap.status.message' value='`$org.onap.ccsdk.sli.adaptors.ansible.message`'/>
+                                        </set>
+                                        <execute plugin='org.onap.ccsdk.sli.plugins.restapicall.RestapiCallNode' method='sendRequest' >
+                                            <parameter name='templateFileName' value="`$prop.restapi.templateDir + '/' + $prop.restapi.lcm.dmaap.publish.templatefile`" />
+                                            <parameter name='restapiUrl' value='`$prop.lcm.dmaap.url`' />
+                                            <parameter name='restapiUser' value='`$prop.lcm.dmaap.user`' />
+                                            <parameter name='restapiPassword' value='`$prop.lcm.dmaap.password`' />
+                                            <parameter name='format' value='json' />
+                                            <parameter name='httpMethod' value='POST' />
+                                            <parameter name='contentType' value='application/json' />
+                                            <parameter name="responsePrefix" value="lcm" />
+                                            <outcome value='failure'>
+                                                <record plugin="org.onap.ccsdk.sli.core.sli.recording.Slf4jRecorder">
+                                                    <parameter name="logger" value="message-log"/>
+                                                    <parameter name="field1" value='Failed to Publish to DMaap'/>
+                                                </record>
+                                            </outcome>
+                                        </execute>
+                                        <return status='success'>
+                                            <parameter name='status.code' value='`$org.onap.ccsdk.sli.adaptors.ansible.result.code`' />
+                                            <parameter name='status.message' value='`$org.onap.ccsdk.sli.adaptors.ansible.message`'/>
+                                        </return>
+                                    </block>
+                                </outcome>
+                            </execute>
+                        </outcome>
+                    </switch>
+                </outcome>
+            </execute>
+        </block>
+    </method>
+</service-logic>
+\ No newline at end of file
diff --git a/platform-logic/lcm/src/main/xml/LCM_upgrade-software.xml b/platform-logic/lcm/src/main/xml/LCM_upgrade-software.xml
new file mode 100644
index 00000000..e3ce5afb
--- /dev/null
+++ b/platform-logic/lcm/src/main/xml/LCM_upgrade-software.xml
@@ -0,0 +1,295 @@
+<service-logic
+    xmlns='http://www.onap.org/sdnc/svclogic'
+    xmlns:xsi='http://www.w3.org/2001/XMLSchema-instance' xsi:schemaLocation='http://www.onap.org/sdnc/svclogic ./svclogic.xsd' module='LCM' version='${project.version}'>
+    <method rpc='upgrade-software' mode='sync'>
+        <block>
+            <execute plugin='org.onap.ccsdk.sli.plugins.prop.PropertiesNode' method='readProperties' >
+                <parameter name='fileName' value='%SDNC_CONFIG_DIR%/lcm-dg.properties' />
+                <parameter name='contextPrefix' value='prop' />
+            </execute>
+            <execute plugin='org.onap.ccsdk.sli.adaptors.ansible.AnsibleAdapter' method='reqExec' >
+                <parameter name='AgentUrl' value='`$prop.ansible.agenturl`'/>
+                <parameter name='User' value='`$prop.ansible.user`'/>
+                <parameter name='Password' value='`prop.ansible.password`'/>
+                <parameter name='LocalParameters' value='`$prop.ansible.lcm.localparameters`'/>
+                <parameter name='EnvParameters' value='`$upgrade-software-input.payload`'/>
+                <parameter name='NodeList' value='`$prop.ansible.nodelist`'/>
+                <parameter name='Timeout' value='`$prop.ansible.timeout`'/>
+                <parameter name='Version' value='`$prop.ansible.version`'/>
+                <parameter name='Id' value='`$upgrade-software-input.common-header.request-id`'/>
+                <parameter name='PlaybookName' value='`$prop.lcm.upgrade-software.playbookname`'/>
+                <outcome value='not-found'>
+                    <block>
+                        <set>
+                            <parameter name='$org.onap.ccsdk.sli.adaptors.ansible.result.code' value='200'/>
+                            <parameter name='org.onap.ccsdk.sli.adaptors.ansible.message' value='Ansible Adapter was not found'/>
+                        </set>
+                        <block>
+                            <set>
+                                <parameter name='lcm-dmaap.version' value='`$prop.lcm.dmaap.version`'/>
+                                <parameter name='lcm-dmaap.correlation-id' value='`$upgrade-software-input.common-header.sub-request-id`'/>
+                                <parameter name='lcm-dmaap.partition' value='`$prop.lcm.dmaap.partition`'/>
+                                <parameter name='lcm-dmaap.rpc-name' value='upgrade-software'/>
+                                <parameter name='lcm-dmaap.type' value='`$prop.lcm.dmaap.type`'/>
+                                <parameter name='lcm-dmaap.timestamp' value='`$upgrade-software-input.common-header.timestamp`'/>
+                                <parameter name='lcm-dmaap.api-ver' value='`$upgrade-software-input.common-header.api-ver`'/>
+                                <parameter name='lcm-dmaap.originator-id' value='`$upgrade-software-input.common-header.originator-id`'/>
+                                <parameter name='lcm-dmaap.request-id' value='`$upgrade-software-input.common-header.originator-id`'/>
+                                <parameter name='lcm-dmaap.sub-request-id' value='`$upgrade-software-input.common-header.sub-request-id`'/>
+                                <parameter name='lcm-dmaap.flags.mode' value='`$upgrade-software-input.common-header.flags.mode`'/>
+                                <parameter name='lcm-dmaap.flags.force' value='`$upgrade-software-input.common-header.flags.force`'/>
+                                <parameter name='lcm-dmaap.flags.ttl' value='`$upgrade-software-input.common-header.flags.ttl`'/>
+                                <parameter name='lcm-dmaap.payload' value='`$org.onap.appc.adapter.ansible.results`'/>
+                                <parameter name='lcm-dmaap.status.code' value='`$org.onap.ccsdk.sli.adaptors.ansible.result.code`' />
+                                <parameter name='lcm-dmaap.status.message' value='`$org.onap.ccsdk.sli.adaptors.ansible.message`'/>
+                            </set>
+                            <execute plugin='org.onap.ccsdk.sli.plugins.restapicall.RestapiCallNode' method='sendRequest' >
+                                <parameter name='templateFileName' value="`$prop.restapi.templateDir + '/' + $prop.restapi.lcm.dmaap.publish.templatefile`" />
+                                <parameter name='restapiUrl' value='`$prop.lcm.dmaap.url`' />
+                                <parameter name='restapiUser' value='`$prop.lcm.dmaap.user`' />
+                                <parameter name='restapiPassword' value='`$prop.lcm.dmaap.password`' />
+                                <parameter name='format' value='json' />
+                                <parameter name='httpMethod' value='POST' />
+                                <parameter name='contentType' value='application/json' />
+                                <parameter name="responsePrefix" value="lcm" />
+                                <outcome value='failure'>
+                                    <record plugin="org.onap.ccsdk.sli.core.sli.recording.Slf4jRecorder">
+                                        <parameter name="logger" value="message-log"/>
+                                        <parameter name="field1" value='Failed to Publish to DMaap'/>
+                                    </record>
+                                </outcome>
+                            </execute>
+                            <return status='failure'>
+                                <parameter name='error-code' value='200' />
+                                <parameter name='error-message' value='`$org.onap.ccsdk.sli.adaptors.ansible.message`' />
+                            </return>
+                        </block>
+                    </block>
+                </outcome>
+                <outcome value='failure'>
+                    <block>
+                        <set>
+                            <parameter name='lcm-dmaap.version' value='`$prop.lcm.dmaap.version`'/>
+                            <parameter name='lcm-dmaap.correlation-id' value='`$upgrade-software-input.common-header.sub-request-id`'/>
+                            <parameter name='lcm-dmaap.partition' value='`$prop.lcm.dmaap.partition`'/>
+                            <parameter name='lcm-dmaap.rpc-name' value='upgrade-software'/>
+                            <parameter name='lcm-dmaap.type' value='`$prop.lcm.dmaap.type`'/>
+                            <parameter name='lcm-dmaap.timestamp' value='`$upgrade-software-input.common-header.timestamp`'/>
+                            <parameter name='lcm-dmaap.api-ver' value='`$upgrade-software-input.common-header.api-ver`'/>
+                            <parameter name='lcm-dmaap.originator-id' value='`$upgrade-software-input.common-header.originator-id`'/>
+                            <parameter name='lcm-dmaap.request-id' value='`$upgrade-software-input.common-header.originator-id`'/>
+                            <parameter name='lcm-dmaap.sub-request-id' value='`$upgrade-software-input.common-header.sub-request-id`'/>
+                            <parameter name='lcm-dmaap.flags.mode' value='`$upgrade-software-input.common-header.flags.mode`'/>
+                            <parameter name='lcm-dmaap.flags.force' value='`$upgrade-software-input.common-header.flags.force`'/>
+                            <parameter name='lcm-dmaap.flags.ttl' value='`$upgrade-software-input.common-header.flags.ttl`'/>
+                            <parameter name='lcm-dmaap.payload' value='`$org.onap.appc.adapter.ansible.results`'/>
+                            <parameter name='lcm-dmaap.status.code' value='`$org.onap.ccsdk.sli.adaptors.ansible.result.code`' />
+                            <parameter name='lcm-dmaap.status.message' value='`$org.onap.ccsdk.sli.adaptors.ansible.message`'/>
+                        </set>
+                        <execute plugin='org.onap.ccsdk.sli.plugins.restapicall.RestapiCallNode' method='sendRequest' >
+                            <parameter name='templateFileName' value="`$prop.restapi.templateDir + '/' + $prop.restapi.lcm.dmaap.publish.templatefile`" />
+                            <parameter name='restapiUrl' value='`$prop.lcm.dmaap.url`' />
+                            <parameter name='restapiUser' value='`$prop.lcm.dmaap.user`' />
+                            <parameter name='restapiPassword' value='`$prop.lcm.dmaap.password`' />
+                            <parameter name='format' value='json' />
+                            <parameter name='httpMethod' value='POST' />
+                            <parameter name='contentType' value='application/json' />
+                            <parameter name="responsePrefix" value="lcm" />
+                            <outcome value='failure'>
+                                <record plugin="org.onap.ccsdk.sli.core.sli.recording.Slf4jRecorder">
+                                    <parameter name="logger" value="message-log"/>
+                                    <parameter name="field1" value='Failed to Publish to DMaap'/>
+                                </record>
+                            </outcome>
+                        </execute>
+                        <return status='failure'>
+                            <parameter name='error-code' value='200' />
+                            <parameter name='error-message' value='`$org.onap.ccsdk.sli.adaptors.ansible.message`' />
+                        </return>
+                    </block>
+                </outcome>
+                <outcome value='Other'>
+                    <switch test="`$org.onap.ccsdk.sli.adaptors.ansible.result.code`">
+                        <outcome value='101'>
+                            <block>
+                                <set>
+                                    <parameter name='lcm-dmaap.version' value='`$prop.lcm.dmaap.version`'/>
+                                    <parameter name='lcm-dmaap.correlation-id' value='`$upgrade-software-input.common-header.sub-request-id`'/>
+                                    <parameter name='lcm-dmaap.partition' value='`$prop.lcm.dmaap.partition`'/>
+                                    <parameter name='lcm-dmaap.rpc-name' value='upgrade-software'/>
+                                    <parameter name='lcm-dmaap.type' value='`$prop.lcm.dmaap.type`'/>
+                                    <parameter name='lcm-dmaap.timestamp' value='`$upgrade-software-input.common-header.timestamp`'/>
+                                    <parameter name='lcm-dmaap.api-ver' value='`$upgrade-software-input.common-header.api-ver`'/>
+                                    <parameter name='lcm-dmaap.originator-id' value='`$upgrade-software-input.common-header.originator-id`'/>
+                                    <parameter name='lcm-dmaap.request-id' value='`$upgrade-software-input.common-header.originator-id`'/>
+                                    <parameter name='lcm-dmaap.sub-request-id' value='`$upgrade-software-input.common-header.sub-request-id`'/>
+                                    <parameter name='lcm-dmaap.flags.mode' value='`$upgrade-software-input.common-header.flags.mode`'/>
+                                    <parameter name='lcm-dmaap.flags.force' value='`$upgrade-software-input.common-header.flags.force`'/>
+                                    <parameter name='lcm-dmaap.flags.ttl' value='`$upgrade-software-input.common-header.flags.ttl`'/>
+                                    <parameter name='lcm-dmaap.payload' value='`$org.onap.appc.adapter.ansible.results`'/>
+                                    <parameter name='lcm-dmaap.status.code' value='`$org.onap.ccsdk.sli.adaptors.ansible.result.code`' />
+                                    <parameter name='lcm-dmaap.status.message' value='`$org.onap.ccsdk.sli.adaptors.ansible.message`'/>
+                                </set>
+                                <execute plugin='org.onap.ccsdk.sli.plugins.restapicall.RestapiCallNode' method='sendRequest' >
+                                    <parameter name='templateFileName' value="`$prop.restapi.templateDir + '/' + $prop.restapi.lcm.dmaap.publish.templatefile`" />
+                                    <parameter name='restapiUrl' value='`$prop.lcm.dmaap.url`' />
+                                    <parameter name='restapiUser' value='`$prop.lcm.dmaap.user`' />
+                                    <parameter name='restapiPassword' value='`$prop.lcm.dmaap.password`' />
+                                    <parameter name='format' value='json' />
+                                    <parameter name='httpMethod' value='POST' />
+                                    <parameter name='contentType' value='application/json' />
+                                    <parameter name="responsePrefix" value="lcm" />
+                                    <outcome value='failure'>
+                                        <record plugin="org.onap.ccsdk.sli.core.sli.recording.Slf4jRecorder">
+                                            <parameter name="logger" value="message-log"/>
+                                            <parameter name="field1" value='Failed to Publish to DMaap'/>
+                                        </record>
+                                    </outcome>
+                                </execute>
+                                <return status='failure'>
+                                    <parameter name='error-code' value='200' />
+                                    <parameter name='error-message' value='`$org.onap.ccsdk.sli.adaptors.ansible.message`' />
+                                </return>
+                            </block>
+                        </outcome>
+                        <outcome value='500'>
+                            <block>
+                                <set>
+                                    <parameter name='lcm-dmaap.version' value='`$prop.lcm.dmaap.version`'/>
+                                    <parameter name='lcm-dmaap.correlation-id' value='`$upgrade-software-input.common-header.sub-request-id`'/>
+                                    <parameter name='lcm-dmaap.partition' value='`$prop.lcm.dmaap.partition`'/>
+                                    <parameter name='lcm-dmaap.rpc-name' value='upgrade-software'/>
+                                    <parameter name='lcm-dmaap.type' value='`$prop.lcm.dmaap.type`'/>
+                                    <parameter name='lcm-dmaap.timestamp' value='`$upgrade-software-input.common-header.timestamp`'/>
+                                    <parameter name='lcm-dmaap.api-ver' value='`$upgrade-software-input.common-header.api-ver`'/>
+                                    <parameter name='lcm-dmaap.originator-id' value='`$upgrade-software-input.common-header.originator-id`'/>
+                                    <parameter name='lcm-dmaap.request-id' value='`$upgrade-software-input.common-header.originator-id`'/>
+                                    <parameter name='lcm-dmaap.sub-request-id' value='`$upgrade-software-input.common-header.sub-request-id`'/>
+                                    <parameter name='lcm-dmaap.flags.mode' value='`$upgrade-software-input.common-header.flags.mode`'/>
+                                    <parameter name='lcm-dmaap.flags.force' value='`$upgrade-software-input.common-header.flags.force`'/>
+                                    <parameter name='lcm-dmaap.flags.ttl' value='`$upgrade-software-input.common-header.flags.ttl`'/>
+                                    <parameter name='lcm-dmaap.payload' value='`$org.onap.appc.adapter.ansible.results`'/>
+                                    <parameter name='lcm-dmaap.status.code' value='`$org.onap.ccsdk.sli.adaptors.ansible.result.code`' />
+                                    <parameter name='lcm-dmaap.status.message' value='`$org.onap.ccsdk.sli.adaptors.ansible.message`'/>
+                                </set>
+                                <execute plugin='org.onap.ccsdk.sli.plugins.restapicall.RestapiCallNode' method='sendRequest' >
+                                    <parameter name='templateFileName' value="`$prop.restapi.templateDir + '/' + $prop.restapi.lcm.dmaap.publish.templatefile`" />
+                                    <parameter name='restapiUrl' value='`$prop.lcm.dmaap.url`' />
+                                    <parameter name='restapiUser' value='`$prop.lcm.dmaap.user`' />
+                                    <parameter name='restapiPassword' value='`$prop.lcm.dmaap.password`' />
+                                    <parameter name='format' value='json' />
+                                    <parameter name='httpMethod' value='POST' />
+                                    <parameter name='contentType' value='application/json' />
+                                    <parameter name="responsePrefix" value="lcm" />
+                                    <outcome value='failure'>
+                                        <record plugin="org.onap.ccsdk.sli.core.sli.recording.Slf4jRecorder">
+                                            <parameter name="logger" value="message-log"/>
+                                            <parameter name="field1" value='Failed to Publish to DMaap'/>
+                                        </record>
+                                    </outcome>
+                                </execute>
+                                <return status='failure'>
+                                    <parameter name='error-code' value='200' />
+                                    <parameter name='error-message' value='`$org.onap.ccsdk.sli.adaptors.ansible.message`' />
+                                </return>
+                            </block>
+                        </outcome>
+                        <outcome value='100'>
+                            <execute plugin='org.onap.ccsdk.sli.adaptors.ansible.AnsibleAdapter' method='reqExecResult' >
+                                <parameter name='AgentUrl' value='`$prop.ansible.agenturl`'/>
+                                <parameter name='User' value='`$prop.ansible.user`'/>
+                                <parameter name='Password' value='`$prop.ansible.password`'/>
+                                <parameter name='Id' value='`$upgrade-software-input.common-header.request-id`'/>
+                                <parameter name='PlaybookName' value='`$prop.lcm.upgrade-software.playbookname`'/>
+                                <outcome value='failure'>
+                                    <block>
+                                        <set>
+                                            <parameter name='lcm-dmaap.version' value='`$prop.lcm.dmaap.version`'/>
+                                            <parameter name='lcm-dmaap.correlation-id' value='`$upgrade-software-input.common-header.sub-request-id`'/>
+                                            <parameter name='lcm-dmaap.partition' value='`$prop.lcm.dmaap.partition`'/>
+                                            <parameter name='lcm-dmaap.rpc-name' value='upgrade-software'/>
+                                            <parameter name='lcm-dmaap.type' value='`$prop.lcm.dmaap.type`'/>
+                                            <parameter name='lcm-dmaap.timestamp' value='`$upgrade-software-input.common-header.timestamp`'/>
+                                            <parameter name='lcm-dmaap.api-ver' value='`$upgrade-software-input.common-header.api-ver`'/>
+                                            <parameter name='lcm-dmaap.originator-id' value='`$upgrade-software-input.common-header.originator-id`'/>
+                                            <parameter name='lcm-dmaap.request-id' value='`$upgrade-software-input.common-header.originator-id`'/>
+                                            <parameter name='lcm-dmaap.sub-request-id' value='`$upgrade-software-input.common-header.sub-request-id`'/>
+                                            <parameter name='lcm-dmaap.flags.mode' value='`$upgrade-software-input.common-header.flags.mode`'/>
+                                            <parameter name='lcm-dmaap.flags.force' value='`$upgrade-software-input.common-header.flags.force`'/>
+                                            <parameter name='lcm-dmaap.flags.ttl' value='`$upgrade-software-input.common-header.flags.ttl`'/>
+                                            <parameter name='lcm-dmaap.payload' value='`$org.onap.appc.adapter.ansible.results`'/>
+                                            <parameter name='lcm-dmaap.status.code' value='`$org.onap.ccsdk.sli.adaptors.ansible.result.code`' />
+                                            <parameter name='lcm-dmaap.status.message' value='`$org.onap.ccsdk.sli.adaptors.ansible.message`'/>
+                                        </set>
+                                        <execute plugin='org.onap.ccsdk.sli.plugins.restapicall.RestapiCallNode' method='sendRequest' >
+                                            <parameter name='templateFileName' value="`$prop.restapi.templateDir + '/' + $prop.restapi.lcm.dmaap.publish.templatefile`" />
+                                            <parameter name='restapiUrl' value='`$prop.lcm.dmaap.url`' />
+                                            <parameter name='restapiUser' value='`$prop.lcm.dmaap.user`' />
+                                            <parameter name='restapiPassword' value='`$prop.lcm.dmaap.password`' />
+                                            <parameter name='format' value='json' />
+                                            <parameter name='httpMethod' value='POST' />
+                                            <parameter name='contentType' value='application/json' />
+                                            <parameter name="responsePrefix" value="lcm" />
+                                            <outcome value='failure'>
+                                                <record plugin="org.onap.ccsdk.sli.core.sli.recording.Slf4jRecorder">
+                                                    <parameter name="logger" value="message-log"/>
+                                                    <parameter name="field1" value='Failed to Publish to DMaap'/>
+                                                </record>
+                                            </outcome>
+                                        </execute>
+                                        <return status='failure'>
+                                            <parameter name='error-code' value='200' />
+                                            <parameter name='error-message' value='`$org.onap.ccsdk.sli.adaptors.ansible.message`' />
+                                        </return>
+                                    </block>
+                                </outcome>
+                                <outcome value='success'>
+                                    <block>
+                                        <set>
+                                            <parameter name='lcm-dmaap.version' value='`$prop.lcm.dmaap.version`'/>
+                                            <parameter name='lcm-dmaap.correlation-id' value='`$upgrade-software-input.common-header.sub-request-id`'/>
+                                            <parameter name='lcm-dmaap.partition' value='`$prop.lcm.dmaap.partition`'/>
+                                            <parameter name='lcm-dmaap.rpc-name' value='upgrade-software'/>
+                                            <parameter name='lcm-dmaap.type' value='`$prop.lcm.dmaap.type`'/>
+                                            <parameter name='lcm-dmaap.timestamp' value='`$upgrade-software-input.common-header.timestamp`'/>
+                                            <parameter name='lcm-dmaap.api-ver' value='`$upgrade-software-input.common-header.api-ver`'/>
+                                            <parameter name='lcm-dmaap.originator-id' value='`$upgrade-software-input.common-header.originator-id`'/>
+                                            <parameter name='lcm-dmaap.request-id' value='`$upgrade-software-input.common-header.originator-id`'/>
+                                            <parameter name='lcm-dmaap.sub-request-id' value='`$upgrade-software-input.common-header.sub-request-id`'/>
+                                            <parameter name='lcm-dmaap.flags.mode' value='`$upgrade-software-input.common-header.flags.mode`'/>
+                                            <parameter name='lcm-dmaap.flags.force' value='`$upgrade-software-input.common-header.flags.force`'/>
+                                            <parameter name='lcm-dmaap.flags.ttl' value='`$upgrade-software-input.common-header.flags.ttl`'/>
+                                            <parameter name='lcm-dmaap.payload' value='`$org.onap.appc.adapter.ansible.results`'/>
+                                            <parameter name='lcm-dmaap.status.code' value='`$org.onap.ccsdk.sli.adaptors.ansible.result.code`' />
+                                            <parameter name='lcm-dmaap.status.message' value='`$org.onap.ccsdk.sli.adaptors.ansible.message`'/>
+                                        </set>
+                                        <execute plugin='org.onap.ccsdk.sli.plugins.restapicall.RestapiCallNode' method='sendRequest' >
+                                            <parameter name='templateFileName' value="`$prop.restapi.templateDir + '/' + $prop.restapi.lcm.dmaap.publish.templatefile`" />
+                                            <parameter name='restapiUrl' value='`$prop.lcm.dmaap.url`' />
+                                            <parameter name='restapiUser' value='`$prop.lcm.dmaap.user`' />
+                                            <parameter name='restapiPassword' value='`$prop.lcm.dmaap.password`' />
+                                            <parameter name='format' value='json' />
+                                            <parameter name='httpMethod' value='POST' />
+                                            <parameter name='contentType' value='application/json' />
+                                            <parameter name="responsePrefix" value="lcm" />
+                                            <outcome value='failure'>
+                                                <record plugin="org.onap.ccsdk.sli.core.sli.recording.Slf4jRecorder">
+                                                    <parameter name="logger" value="message-log"/>
+                                                    <parameter name="field1" value='Failed to Publish to DMaap'/>
+                                                </record>
+                                            </outcome>
+                                        </execute>
+                                        <return status='success'>
+                                            <parameter name='status.code' value='`$org.onap.ccsdk.sli.adaptors.ansible.result.code`' />
+                                            <parameter name='status.message' value='`$org.onap.ccsdk.sli.adaptors.ansible.message`'/>
+                                        </return>
+                                    </block>
+                                </outcome>
+                            </execute>
+                        </outcome>
+                    </switch>
+                </outcome>
+            </execute>
+        </block>
+    </method>
+</service-logic>
+\ No newline at end of file