From 9705e69b5e6725f3c0811212b5b91091c3bb8403 Mon Sep 17 00:00:00 2001 From: rameshiyer27 Date: Mon, 28 Mar 2022 23:46:06 +0100 Subject: Add smoke testing documentation for acm participants Issue-ID: POLICY-4004 Signed-off-by: zrrmmua Change-Id: Idea5261380d318bdce2d2993e20a131e5660e0fd --- .../devtools/acm-participants-smoke.rst | 258 +++++++++++++++++++++ .../development/devtools/cl-participants-smoke.rst | 251 -------------------- .../devtools/json/acm-instantiation.json | 53 +++++ .../devtools/json/cl-instantiation.json | 53 ----- .../devtools/tosca/smoke-test-participants.yaml | 68 +++--- 5 files changed, 345 insertions(+), 338 deletions(-) create mode 100644 docs/development/devtools/acm-participants-smoke.rst delete mode 100644 docs/development/devtools/cl-participants-smoke.rst create mode 100644 docs/development/devtools/json/acm-instantiation.json delete mode 100644 docs/development/devtools/json/cl-instantiation.json (limited to 'docs') diff --git a/docs/development/devtools/acm-participants-smoke.rst b/docs/development/devtools/acm-participants-smoke.rst new file mode 100644 index 00000000..3c5b6f88 --- /dev/null +++ b/docs/development/devtools/acm-participants-smoke.rst @@ -0,0 +1,258 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 International License. + +.. _clamp-acm-participants-smoke-tests: + +CLAMP participants (kubernetes, http) Smoke Tests +------------------------------------------------- +1. Introduction +*************** +The CLAMP participants (kubernetes and http) are used to interact with the helm client in a kubernetes environment for the +deployment of microservices via helm chart as well as to configure the microservices over REST endpoints. Both of these participants are +often used together in the Automation Composition Management workflow. + +This document will serve as a guide to do smoke tests on the different components that are involved when working with the participants and outline how they operate. It will also show a developer how to set up their environment for carrying out smoke tests on these participants. + +2. Setup Guide +************** +This article assumes that: + +* You are using the operating systems such as linux/macOS/windows. +* You are using a directory called *git* off your home directory *(~/git)* for your git repositories +* Your local maven repository is in the location *~/.m2/repository* +* You have copied the settings.xml from oparent to *~/.m2/* directory +* You have added settings to access the ONAP Nexus to your M2 configuration, see `Maven Settings Example `_ (bottom of the linked page) + +The procedure documented in this article has been verified using Ubuntu 20.04 LTS VM. + +2.1 Prerequisites +================= +- Java 11 +- Docker +- Maven 3 +- Git +- helm3 +- k8s cluster +- Refer to this guide for basic environment setup `Setting up dev environment `_ + +2.2 Assumptions +=============== +- You are accessing the policy repositories through gerrit. + +The following repositories are required for development in this project. These repositories should be present on your machine and you should run "mvn clean install" on all of them so that the packages are present in your .m2 repository. + +- policy/parent +- policy/common +- policy/models +- policy/clamp +- policy/docker + +In this setup guide, we will be setting up all the components technically required for a working dev environment. + +2.3 Setting up the components +============================= + +2.3.1 MariaDB Setup +^^^^^^^^^^^^^^^^^^^ +We will be using Docker to run our mariadb instance. It will have the acm-runtime database running in it. + +- AutomationComposition: the runtime-acm db + +The easiest way to do this is to perform a small alteration on an SQL script provided by the clamp backend in the file "runtime/extra/sql/bulkload/create-db.sql" + +.. code-block:: mysql + + CREATE DATABASE `clampacm`; + USE `clampacm`; + DROP USER 'policy'; + CREATE USER 'policy'; + GRANT ALL on clampacm.* to 'policy' identified by 'P01icY' with GRANT OPTION; + +Once this has been done, we can run the bash script provided here: "runtime/extra/bin-for-dev/start-db.sh" + +.. code-block:: bash + + ./start-db.sh + +This will setup all the automation composition runtime database. The database will be exposed locally on port 3306 and will be backed by an anonymous docker volume. + +2.3.2 DMAAP Simulator +^^^^^^^^^^^^^^^^^^^^^ +For convenience, a dmaap simulator has been provided in the policy/models repository. To start the simulator, you can do the following: + +1. Navigate to /models-sim/policy-models-simulators in the policy/models repository. +2. Add a configuration file to src/test/resources with the following contents: + +.. code-block:: json + + { + "dmaapProvider":{ + "name":"DMaaP simulator", + "topicSweepSec":900 + }, + "restServers":[ + { + "name":"DMaaP simulator", + "providerClass":"org.onap.policy.models.sim.dmaap.rest.DmaapSimRestControllerV1", + "host":"localhost", + "port":3904, + "https":false + } + ] + } + +3. You can then start dmaap with: + +.. code-block:: bash + + mvn exec:java -Dexec.mainClass=org.onap.policy.models.simulators.Main -Dexec.args="src/test/resources/YOUR_CONF_FILE.json" + +At this stage the dmaap simulator should be running on your local machine on port 3904. + + +2.3.3 Automation composition Runtime +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +To start the automation composition runtime service, we need to execute the following maven command from the "runtime-acm" directory in the clamp repo. Automation composition runtime uses the config file "src/main/resources/application.yaml" by default. + +.. code-block:: bash + + mvn spring-boot:run + +2.3.4 Helm chart repository +^^^^^^^^^^^^^^^^^^^^^^^^^^^ +Kubernetes participant consumes helm charts from the local chart database as well as from a helm repository. For the smoke testing, we are going to add `nginx-stable` helm repository to the helm client. +The following command can be used to add nginx repository to the helm client. + +.. code-block:: bash + + helm repo add nginx-stable https://helm.nginx.com/stable + +2.3.5 Kubernetes and http participants +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +The participants can be started from the clamp repository by executing the following maven command from the appropriate directories. +The participants will be started and get registered to the Automation composition runtime. + +Navigate to the directory "participant/participant-impl/participant-impl-kubernetes/" and start kubernetes participant. + +.. code-block:: bash + + mvn spring-boot:run + +Navigate to the directory "participant/participant-impl/participant-impl-http/" and start http participant. + +.. code-block:: bash + + mvn spring-boot:run + +For building docker images of runtime-acm and participants: + +.. code-block:: bash + + cd ~/git/onap/policy/clamp/packages/ + mvn clean install -P docker + + +3. Running Tests +**************** +In this section, we will run through the sequence of steps in ACM workflow . The workflow can be triggered via Postman client. + +3.1 Commissioning +================= +Commission Automation composition TOSCA definitions to Runtime. + +The Automation composition definitions are commissioned to runtime-acm which populates the ACM runtime database. +The following sample TOSCA template is commissioned to the runtime endpoint which contains definitions for kubernetes participant that deploys nginx ingress microservice +helm chart and a http POST request for http participant. + +:download:`Tosca Service Template ` + +Commissioning Endpoint: + +.. code-block:: bash + + POST: https:// : /onap/policy/clamp/acm/v2/commission + +A successful commissioning gives 200 response in the postman client. + + +3.2 Create New Instances of Automation composition +================================================== +Once the template is commissioned, we can instantiate automation composition instances. This will create the instances with default state "UNINITIALISED". + +Instantiation Endpoint: + +.. code-block:: bash + + POST: https:// : /onap/policy/clamp/acm/v2/instantiation + +Request body: + +:download:`Instantiation json ` + +3.3 Change the State of the Instance +==================================== +When the automation composition is updated with state “PASSIVE”, the Kubernetes participant fetches the node template for all automation composition elements and deploys the helm chart of each AC element in to the cluster. The following sample json input is passed on the request body. + +Automation Composition Update Endpoint: + +.. code-block:: bash + + PUT: https:// : /onap/policy/clamp/acm/v2/instantiation/command + + Request body: +.. code-block:: bash + + { + "orderedState": "PASSIVE", + "automationCompositionIdentifierList": [ + { + "name": "K8SInstance0", + "version": "1.0.1" + } + ] + } + + +After the state changed to "PASSIVE", nginx-ingress pod is deployed in the kubernetes cluster. And http participant should have posted the dummy data to the configured URL in the tosca template. + +The following command can be used to verify the pods deployed successfully by kubernetes participant. + +.. code-block:: bash + + helm ls -n onap | grep nginx + kubectl get po -n onap | grep nginx + +The overall state of the automation composition should be "PASSIVE" to indicate both the participants has successfully completed the operations. This can be verified by the following rest endpoint. + +Verify automation composition state: + +.. code-block:: bash + + GET: https:// : /onap/policy/clamp/acm/v2/instantiation + + +3.4 Automation Compositions can be "UNINITIALISED" after deployment +=================================================================== + +By changing the state to "UNINITIALISED", all the helm deployments under the corresponding automation composition will be uninstalled from the cluster. +Automation Composition Update Endpoint: + +.. code-block:: bash + + PUT: https:// : /onap/policy/clamp/acm/v2/instantiation/command + + Request body: +.. code-block:: bash + + { + "orderedState": "UNINITIALISED", + "automationCompositionIdentifierList": [ + { + "name": "K8SInstance0", + "version": "1.0.1" + } + ] + } + +The nginx pod should be deleted from the k8s cluster. + +This concludes the required smoke tests for http and kubernetes participants. diff --git a/docs/development/devtools/cl-participants-smoke.rst b/docs/development/devtools/cl-participants-smoke.rst deleted file mode 100644 index 202f5d75..00000000 --- a/docs/development/devtools/cl-participants-smoke.rst +++ /dev/null @@ -1,251 +0,0 @@ -.. This work is licensed under a Creative Commons Attribution 4.0 International License. - -.. _clamp-controlloop-participants-smoke-tests: - -CLAMP participants (kubernetes, http) Smoke Tests -------------------------------------------------- -1. Introduction -*************** -The CLAMP participants (kubernetes and http) are used to interact with the helm client in a kubernetes environment for the -deployment of microservices via helm chart as well as to configure the microservices over REST endpoints. Both of these participants are -often used together in the Control loop workflow. - -This document will serve as a guide to do smoke tests on the different components that are involved when working with the participants and outline how they operate. It will also show a developer how to set up their environment for carrying out smoke tests on these participants. - -2. Setup Guide -************** -This article assumes that: - -* You are using the operating systems such as linux/macOS/windows. -* You are using a directory called *git* off your home directory *(~/git)* for your git repositories -* Your local maven repository is in the location *~/.m2/repository* -* You have copied the settings.xml from oparent to *~/.m2/* directory -* You have added settings to access the ONAP Nexus to your M2 configuration, see `Maven Settings Example `_ (bottom of the linked page) - -The procedure documented in this article has been verified using Ubuntu 20.04 LTS VM. - -2.1 Prerequisites -================= -- Java 11 -- Docker -- Maven 3 -- Git -- helm3 -- k8s cluster -- Refer to this guide for basic environment setup `Setting up dev environment `_ - -2.2 Assumptions -=============== -- You are accessing the policy repositories through gerrit. - -The following repositories are required for development in this project. These repositories should be present on your machine and you should run "mvn clean install" on all of them so that the packages are present in your .m2 repository. - -- policy/parent -- policy/common -- policy/models -- policy/clamp -- policy/docker - -In this setup guide, we will be setting up all the components technically required for a working dev environment. - -2.3 Setting up the components -============================= - -2.3.1 MariaDB Setup -^^^^^^^^^^^^^^^^^^^ -We will be using Docker to run our mariadb instance. It will have the runtime-controlloop database running in it. - -- controlloop: the runtime-controlloop db - -The easiest way to do this is to perform a small alteration on an SQL script provided by the clamp backend in the file "runtime/extra/sql/bulkload/create-db.sql" - -.. code-block:: mysql - - CREATE DATABASE `controlloop`; - USE `controlloop`; - DROP USER 'policy'; - CREATE USER 'policy'; - GRANT ALL on controlloop.* to 'policy' identified by 'P01icY' with GRANT OPTION; - -Once this has been done, we can run the bash script provided here: "runtime/extra/bin-for-dev/start-db.sh" - -.. code-block:: bash - - ./start-db.sh - -This will setup all the Control Loop runtime database. The database will be exposed locally on port 3306 and will be backed by an anonymous docker volume. - -2.3.2 DMAAP Simulator -^^^^^^^^^^^^^^^^^^^^^ -For convenience, a dmaap simulator has been provided in the policy/models repository. To start the simulator, you can do the following: - -1. Navigate to /models-sim/policy-models-simulators in the policy/models repository. -2. Add a configuration file to src/test/resources with the following contents: - -.. code-block:: json - - { - "dmaapProvider":{ - "name":"DMaaP simulator", - "topicSweepSec":900 - }, - "restServers":[ - { - "name":"DMaaP simulator", - "providerClass":"org.onap.policy.models.sim.dmaap.rest.DmaapSimRestControllerV1", - "host":"localhost", - "port":3904, - "https":false - } - ] - } - -3. You can then start dmaap with: - -.. code-block:: bash - - mvn exec:java -Dexec.mainClass=org.onap.policy.models.simulators.Main -Dexec.args="src/test/resources/YOUR_CONF_FILE.json" - -At this stage the dmaap simulator should be running on your local machine on port 3904. - - -2.3.3 Controlloop Runtime -^^^^^^^^^^^^^^^^^^^^^^^^^ -To start the controlloop runtime service, we need to execute the following maven command from the "runtime-controlloop" directory in the clamp repo. Control Loop runtime uses the config file "src/main/resources/application.yaml" by default. - -.. code-block:: bash - - mvn spring-boot:run - -2.3.4 Helm chart repository -^^^^^^^^^^^^^^^^^^^^^^^^^^^ -Kubernetes participant consumes helm charts from the local chart database as well as from a helm repository. For the smoke testing, we are going to add `nginx-stable` helm repository to the helm client. -The following command can be used to add nginx repository to the helm client. - -.. code-block:: bash - - helm repo add nginx-stable https://helm.nginx.com/stable - -2.3.5 Kubernetes and http participants -^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ -The participants can be started from the clamp repository by executing the following maven command from the appropriate directories. -The participants will be started and get registered to the Control Loop runtime. - -Navigate to the directory "participant/participant-impl/participant-impl-kubernetes/" and start kubernetes participant. - -.. code-block:: bash - - mvn spring-boot:run - -Navigate to the directory "participant/participant-impl/participant-impl-http/" and start http participant. - -.. code-block:: bash - - mvn spring-boot:run - - -3. Running Tests -**************** -In this section, we will run through the sequence of steps in Control Loop workflow . The workflow can be triggered via Postman client. - -3.1 Commissioning -================= -Commission Control loop TOSCA definitions to Runtime. - -The Control Loop definitions are commissioned to CL runtime which populates the CL runtime database. -The following sample TOSCA template is commissioned to the runtime endpoint which contains definitions for kubernetes participant that deploys nginx ingress microservice -helm chart and a http POST request for http participant. - -:download:`Tosca Service Template ` - -Commissioning Endpoint: - -.. code-block:: bash - - POST: https:// : /onap/controlloop/v2/commission - -A successful commissioning gives 200 response in the postman client. - - -3.2 Create New Instances of Control Loops -========================================= -Once the template is commissioned, we can instantiate Control Loop instances. This will create the instances with default state "UNINITIALISED". - -Instantiation Endpoint: - -.. code-block:: bash - - POST: https:// : /onap/controlloop/v2/instantiation - -Request body: - -:download:`Instantiation json ` - -3.3 Change the State of the Instance -==================================== -When the Control loop is updated with state “PASSIVE”, the Kubernetes participant fetches the node template for all control loop elements and deploys the helm chart of each CL element in to the cluster. The following sample json input is passed on the request body. - -Control Loop Update Endpoint: - -.. code-block:: bash - - PUT: https:// : /onap/controlloop/v2/instantiation/command - - Request body: -.. code-block:: bash - - { - "orderedState": "PASSIVE", - "controlLoopIdentifierList": [ - { - "name": "K8SInstance0", - "version": "1.0.1" - } - ] - } - - -After the state changed to "PASSIVE", nginx-ingress pod is deployed in the kubernetes cluster. And http participant should have posted the dummy data to the configured URL in the tosca template. - -The following command can be used to verify the pods deployed successfully by kubernetes participant. - -.. code-block:: bash - - helm ls -n onap | grep nginx - kubectl get po -n onap | grep nginx - -The overall state of the control loop should be "PASSIVE" to indicate both the participants has successfully completed the operations. This can be verified by the following rest endpoint. - -Verify control loop state: - -.. code-block:: bash - - GET: https:// : /onap/controlloop/v2/instantiation - - -3.4 Control Loop can be "UNINITIALISED" after deployment -======================================================== - -By changing the state to "UNINITIALISED", all the helm deployments under the corresponding control loop will be uninstalled from the cluster. -Control Loop Update Endpoint: - -.. code-block:: bash - - PUT: https:// : /onap/controlloop/v2/instantiation/command - - Request body: -.. code-block:: bash - - { - "orderedState": "UNINITIALISED", - "controlLoopIdentifierList": [ - { - "name": "K8SInstance0", - "version": "1.0.1" - } - ] - } - -The nginx pod should be deleted from the k8s cluster. - -This concludes the required smoke tests for http and kubernetes participants. diff --git a/docs/development/devtools/json/acm-instantiation.json b/docs/development/devtools/json/acm-instantiation.json new file mode 100644 index 00000000..9977cf02 --- /dev/null +++ b/docs/development/devtools/json/acm-instantiation.json @@ -0,0 +1,53 @@ +{ + "automationCompositionList ": [ + { + "name": "K8SInstance0", + "version": "1.0.1", + "definition": { + "name": "org.onap.domain.sample.GenericK8s_AutomationCompositionDefinition", + "version": "1.2.3" + }, + "state": "UNINITIALISED", + "orderedState": "UNINITIALISED", + "description": "K8s automation composition instance 0", + "elements": { + "709c62b3-8918-41b9-a747-d21eb79c6c21": { + "id": "709c62b3-8918-41b9-a747-d21eb79c6c21", + "definition": { + "name": "org.onap.policy.clamp.Local_K8SMicroserviceAutomationCompositionElement", + "version": "1.2.3" + }, + "participantId": { + "name": "K8sParticipant0", + "version": "1.0.0" + }, + "participantType": { + "name": "org.onap.policy.clamp.acm.KubernetesParticipant", + "version": "2.3.4" + }, + "state": "UNINITIALISED", + "orderedState": "UNINITIALISED", + "description": "K8s Automation composition Element for the nginx-ingress microservice" + }, + "709c62b3-8918-41b9-a747-d21eb79c6c22": { + "id": "709c62b3-8918-41b9-a747-d21eb79c6c22", + "definition": { + "name": "org.onap.policy.clamp.Http_AutomationCompositionElement", + "version": "1.2.3" + }, + "participantId": { + "name": "HttpParticipant0", + "version": "1.0.0" + }, + "participantType": { + "name": "org.onap.policy.clamp.acm.HttpParticipant", + "version": "2.3.4" + }, + "state": "UNINITIALISED", + "orderedState": "UNINITIALISED", + "description": "Http Automation composition Element" + } + } + } + ] +} \ No newline at end of file diff --git a/docs/development/devtools/json/cl-instantiation.json b/docs/development/devtools/json/cl-instantiation.json deleted file mode 100644 index 66197860..00000000 --- a/docs/development/devtools/json/cl-instantiation.json +++ /dev/null @@ -1,53 +0,0 @@ -{ - "controlLoopList": [ - { - "name": "K8SInstance0", - "version": "1.0.1", - "definition": { - "name": "org.onap.domain.sample.GenericK8s_ControlLoopDefinition", - "version": "1.2.3" - }, - "state": "UNINITIALISED", - "orderedState": "UNINITIALISED", - "description": "K8s control loop instance 0", - "elements": { - "709c62b3-8918-41b9-a747-d21eb79c6c21": { - "id": "709c62b3-8918-41b9-a747-d21eb79c6c21", - "definition": { - "name": "org.onap.domain.database.Local_K8SMicroserviceControlLoopElement", - "version": "1.2.3" - }, - "participantId": { - "name": "K8sParticipant0", - "version": "1.0.0" - }, - "participantType": { - "name": "org.onap.k8s.controlloop.K8SControlLoopParticipant", - "version": "2.3.4" - }, - "state": "UNINITIALISED", - "orderedState": "UNINITIALISED", - "description": "K8s Control Loop Element for the nginx-ingress microservice" - }, - "709c62b3-8918-41b9-a747-d21eb79c6c22": { - "id": "709c62b3-8918-41b9-a747-d21eb79c6c22", - "definition": { - "name": "org.onap.domain.database.Http_MicroserviceControlLoopElement", - "version": "1.2.3" - }, - "participantId": { - "name": "HttpParticipant0", - "version": "1.0.0" - }, - "participantType": { - "name": "org.onap.k8s.controlloop.HttpControlLoopParticipant", - "version": "2.3.4" - }, - "state": "UNINITIALISED", - "orderedState": "UNINITIALISED", - "description": "Http Control Loop Element" - } - } - } - ] -} \ No newline at end of file diff --git a/docs/development/devtools/tosca/smoke-test-participants.yaml b/docs/development/devtools/tosca/smoke-test-participants.yaml index a10e05ec..7823a773 100644 --- a/docs/development/devtools/tosca/smoke-test-participants.yaml +++ b/docs/development/devtools/tosca/smoke-test-participants.yaml @@ -9,7 +9,7 @@ data_types: version: type: string required: true - org.onap.datatypes.policy.clamp.controlloop.httpControlLoopElement.RestRequest: + org.onap.datatypes.policy.clamp.acm.httpAutomationCompositionElement.RestRequest: version: 1.0.0 derived_from: tosca.datatypes.Root properties: @@ -38,7 +38,7 @@ data_types: constraints: - in_range: [100, 599] description: THe expected HTTP status code for the REST request - org.onap.datatypes.policy.clamp.controlloop.httpControlLoopElement.ConfigurationEntity: + org.onap.datatypes.policy.clamp.acm.httpAutomationCompositionElement.ConfigurationEntity: version: 1.0.0 derived_from: tosca.datatypes.Root properties: @@ -46,22 +46,22 @@ data_types: type: onap.datatypes.ToscaConceptIdentifier typeVersion: 1.0.0 required: true - description: The name and version of a Configuration Entity to be handled by the HTTP Control Loop Element + description: The name and version of a Configuration Entity to be handled by the HTTP Automation Composition Element restSequence: type: list entry_schema: - type: org.onap.datatypes.policy.clamp.controlloop.httpControlLoopElement.RestRequest + type: org.onap.datatypes.policy.clamp.acm.httpAutomationCompositionElement.RestRequest typeVersion: 1.0.0 description: A sequence of REST commands to send to the REST endpoint node_types: - org.onap.policy.clamp.controlloop.Participant: + org.onap.policy.clamp.acm.Participant: version: 1.0.1 derived_from: tosca.nodetypes.Root properties: provider: type: string required: false - org.onap.policy.clamp.controlloop.ControlLoopElement: + org.onap.policy.clamp.acm.AutomationCompositionElement: version: 1.0.1 derived_from: tosca.nodetypes.Root properties: @@ -76,7 +76,7 @@ node_types: required: true metadata: common: true - description: The identity of the participant type that hosts this type of Control Loop Element + description: The identity of the participant type that hosts this type of Automation Composition Element startPhase: type: integer required: false @@ -84,9 +84,9 @@ node_types: - greater_or_equal: 0 metadata: common: true - description: A value indicating the start phase in which this control loop element will be started, the - first start phase is zero. Control Loop Elements are started in their start_phase order and stopped - in reverse start phase order. Control Loop Elements with the same start phase are started and + description: A value indicating the start phase in which this ACM element will be started, the + first start phase is zero. Automation Composition Elements are started in their start_phase order and stopped + in reverse start phase order. Automation Composition Elements with the same start phase are started and stopped simultaneously uninitializedToPassiveTimeout: type: integer @@ -124,7 +124,7 @@ node_types: metadata: common: true description: The maximum time in seconds to wait for a state chage from passive to uninitialized - org.onap.policy.clamp.controlloop.ControlLoop: + org.onap.policy.clamp.acm.AutomationComposition: version: 1.0.1 derived_from: tosca.nodetypes.Root properties: @@ -136,9 +136,9 @@ node_types: required: true entry_schema: type: onap.datatypes.ToscaConceptIdentifier - org.onap.policy.clamp.controlloop.K8SMicroserviceControlLoopElement: + org.onap.policy.clamp.acm.K8SMicroserviceAutomationCompositionElement: version: 1.0.1 - derived_from: org.onap.policy.clamp.controlloop.ControlLoopElement + derived_from: org.onap.policy.clamp.acm.AutomationCompositionElement properties: chart: type: string @@ -156,9 +156,9 @@ node_types: values: type: string required: true - org.onap.policy.clamp.controlloop.HttpControlLoopElement: + org.onap.policy.clamp.acm.HttpAutomationCompositionElement: version: 1.0.1 - derived_from: org.onap.policy.clamp.controlloop.ControlLoopElement + derived_from: org.onap.policy.clamp.acm.AutomationCompositionElement properties: baseUrl: type: string @@ -174,31 +174,31 @@ node_types: type: map required: true entry_schema: - type: org.onap.datatypes.policy.clamp.controlloop.httpControlLoopElement.ConfigurationEntity + type: org.onap.datatypes.policy.clamp.acm.httpAutomationCompositionElement.ConfigurationEntity typeVersion: 1.0.0 - description: The connfiguration entities the Control Loop Element is managing and their associated REST requests + description: The connfiguration entities the Automation Composition Element is managing and their associated REST requests topology_template: node_templates: - org.onap.k8s.controlloop.K8SControlLoopParticipant: + org.onap.policy.clamp.acm.KubernetesParticipant: version: 2.3.4 - type: org.onap.policy.clamp.controlloop.Participant + type: org.onap.policy.clamp.acm.Participant type_version: 1.0.1 description: Participant for K8S properties: provider: ONAP - org.onap.domain.database.Local_K8SMicroserviceControlLoopElement: + org.onap.policy.clamp.Local_K8SMicroserviceAutomationCompositionElement: # Chart installation without passing repository info version: 1.2.3 - type: org.onap.policy.clamp.controlloop.K8SMicroserviceControlLoopElement + type: org.onap.policy.clamp.acm.K8SMicroserviceAutomationCompositionElement type_version: 1.0.0 - description: Control loop element for the K8S microservice for local chart + description: Automation Composition element for the K8S microservice for local chart properties: provider: ONAP participant_id: name: K8sParticipant0 version: 1.0.0 participantType: - name: org.onap.k8s.controlloop.K8SControlLoopParticipant + name: org.onap.policy.clamp.acm.KubernetesParticipant version: 2.3.4 chart: chartId: @@ -206,26 +206,26 @@ topology_template: version: 0.11.0 releaseName: nginxapp namespace: onap - org.onap.controlloop.HttpControlLoopParticipant: + org.onap.policy.clamp.acm.HttpParticipant: version: 2.3.4 - type: org.onap.policy.clamp.controlloop.Participant + type: org.onap.policy.clamp.acm.Participant type_version: 1.0.1 description: Participant for Http requests properties: provider: ONAP - org.onap.domain.database.Http_MicroserviceControlLoopElement: + org.onap.policy.clamp.Http_AutomationCompositionElement: version: 1.2.3 - type: org.onap.policy.clamp.controlloop.HttpControlLoopElement + type: org.onap.policy.clamp.acm.HttpAutomationCompositionElement type_version: 1.0.1 - description: Control loop element for the http requests of PMSH microservice + description: Automation composition element for the http requests of PMSH microservice properties: provider: ONAP participant_id: name: HttpParticipant0 version: 1.0.0 participantType: - name: org.onap.k8s.controlloop.HttpControlLoopParticipant + name: org.onap.policy.clamp.acm.HttpParticipant version: 2.3.4 uninitializedToPassiveTimeout: 180 startPhase: 1 @@ -246,15 +246,15 @@ topology_template: expectedResponse: 200 - org.onap.domain.sample.GenericK8s_ControlLoopDefinition: + org.onap.domain.sample.GenericK8s_AutomationCompositionDefinition: version: 1.2.3 - type: org.onap.policy.clamp.controlloop.ControlLoop + type: org.onap.policy.clamp.acm.AutomationComposition type_version: 1.0.0 - description: Control loop for Hello World + description: Automation compostion for smoke testing participants properties: provider: ONAP elements: - - name: org.onap.domain.database.Local_K8SMicroserviceControlLoopElement + - name: org.onap.policy.clamp.Local_K8SMicroserviceAutomationCompositionElement version: 1.2.3 - - name: org.onap.domain.database.Http_MicroserviceControlLoopElement + - name: org.onap.policy.clamp.Http_AutomationCompositionElement version: 1.2.3 -- cgit 1.2.3-korg