From a54a2373f1b48cdb64d4920ec57ffeab4f228814 Mon Sep 17 00:00:00 2001 From: jhh Date: Fri, 17 Jan 2020 15:43:58 -0600 Subject: Comment from 100393 review Missed 2020 year update in license of docker-install.sh: https://gerrit.onap.org/r/#/c/policy/drools-pdp/+/100393 Issue-ID: POLICY-1586 Signed-off-by: jhh Change-Id: I1b2e67a5444597a71f2402638dd5784e72b64137 Signed-off-by: jhh --- packages/docker/src/main/docker/docker-install.sh | 1346 ++++++++++----------- 1 file changed, 667 insertions(+), 679 deletions(-) (limited to 'packages/docker/src') diff --git a/packages/docker/src/main/docker/docker-install.sh b/packages/docker/src/main/docker/docker-install.sh index 824735ca..dfef59f3 100644 --- a/packages/docker/src/main/docker/docker-install.sh +++ b/packages/docker/src/main/docker/docker-install.sh @@ -4,14 +4,14 @@ # ============LICENSE_START======================================================= # Installation Package # ================================================================================ -# Copyright (C) 2017-2019 AT&T Intellectual Property. All rights reserved. +# Copyright (C) 2017-2020 AT&T Intellectual Property. All rights reserved. # ================================================================================ # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at -# +# # http://www.apache.org/licenses/LICENSE-2.0 -# +# # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. @@ -20,560 +20,552 @@ # ============LICENSE_END========================================================= ### - function JAVA_HOME() { - if [[ $DEBUG == y ]]; then - echo "-- ${FUNCNAME[0]} $@ --" - set -x - fi - - if [[ -z ${JAVA_HOME} ]]; then - echo "error: aborting installation: JAVA_HOME variable must be present in base.conf" - exit 1; - fi - - echo "JAVA_HOME is ${JAVA_HOME}" + if [[ $DEBUG == y ]]; then + echo "-- ${FUNCNAME[0]} $@ --" + set -x + fi + + if [[ -z ${JAVA_HOME} ]]; then + echo "error: aborting installation: JAVA_HOME variable must be present in base.conf" + exit 1 + fi + + echo "JAVA_HOME is ${JAVA_HOME}" } function POLICY_HOME() { - if [[ $DEBUG == y ]]; then - echo "-- ${FUNCNAME[0]} $@ --" - set -x - fi - - local POLICY_HOME_ABS - - if [[ -z ${POLICY_HOME} ]]; then - echo "error: aborting installation: the installation directory POLICY_HOME must be set" - exit 1 - fi - - POLICY_HOME_ABS=$(readlink -f "${POLICY_HOME}") - if [[ -n ${POLICY_HOME_ABS} ]]; then - export POLICY_HOME=${POLICY_HOME_ABS} - fi - - echo "POLICY_HOME is ${POLICY_HOME}" - - # Do not allow installations from within POLICY_HOME dir or sub-dirs - if [[ "$(pwd)/" == ${POLICY_HOME}/* ]]; then - echo "error: aborting installation: cannot be executed from '${POLICY_HOME}' or sub-directories. " - exit 1 - fi + if [[ $DEBUG == y ]]; then + echo "-- ${FUNCNAME[0]} $@ --" + set -x + fi + + local POLICY_HOME_ABS + + if [[ -z ${POLICY_HOME} ]]; then + echo "error: aborting installation: the installation directory POLICY_HOME must be set" + exit 1 + fi + + POLICY_HOME_ABS=$(readlink -f "${POLICY_HOME}") + if [[ -n ${POLICY_HOME_ABS} ]]; then + export POLICY_HOME=${POLICY_HOME_ABS} + fi + + echo "POLICY_HOME is ${POLICY_HOME}" + + # Do not allow installations from within POLICY_HOME dir or sub-dirs + if [[ "$(pwd)/" == ${POLICY_HOME}/* ]]; then + echo "error: aborting installation: cannot be executed from '${POLICY_HOME}' or sub-directories. " + exit 1 + fi } function process_configuration() { - if [[ $DEBUG == y ]]; then - echo "-- ${FUNCNAME[0]} $@ --" - set -x - fi - - local CONF_FILE name value - - CONF_FILE=$1 - while read line || [ -n "${line}" ]; do + if [[ $DEBUG == y ]]; then + echo "-- ${FUNCNAME[0]} $@ --" + set -x + fi + + local CONF_FILE name value + + CONF_FILE=$1 + while read line || [ -n "${line}" ]; do if [[ -n ${line} ]] && [[ ${line} != *#* ]]; then - name=$(echo "${line%%=*}") - value=$(echo "${line#*=}") - # escape ampersand so that sed does not replace it with the search string + name=$(echo "${line%%=*}") + value=$(echo "${line#*=}") + # escape ampersand so that sed does not replace it with the search string value=${value//&/\\&} - if [[ -z ${name} ]] || [[ -z $value ]]; then - echo "WARNING: ${line} missing name or value" - fi - export ${name}="${value}" - eval "${name}" "${value}" 2> /dev/null + if [[ -z ${name} ]] || [[ -z $value ]]; then + echo "WARNING: ${line} missing name or value" + fi + export ${name}="${value}" + eval "${name}" "${value}" 2>/dev/null fi - done < "${CONF_FILE}" - return 0 + done <"${CONF_FILE}" + return 0 } function component_preinstall() { - if [[ $DEBUG == y ]]; then - echo "-- ${FUNCNAME[0]} $@ --" - set -x - fi - - /bin/sed -i -e 's!${{POLICY_HOME}}!'"${POLICY_HOME}!g" \ - -e 's!${{FQDN}}!'"${FQDN}!g" \ - *.conf > /dev/null 2>&1 + if [[ $DEBUG == y ]]; then + echo "-- ${FUNCNAME[0]} $@ --" + set -x + fi + + /bin/sed -i -e 's!${{POLICY_HOME}}!'"${POLICY_HOME}!g" \ + -e 's!${{FQDN}}!'"${FQDN}!g" \ + *.conf >/dev/null 2>&1 } function configure_component() { - if [[ $DEBUG == y ]]; then - echo "-- ${FUNCNAME[0]} $@ --" - set -x - fi - - local CONF_FILE COMPONENT_ROOT_DIR SED_LINE SED_FILES name value - - CONF_FILE=$1 - COMPONENT_ROOT_DIR=$2 - - SED_LINE="sed -i" - SED_LINE+=" -e 's!\${{POLICY_HOME}}!${POLICY_HOME}!g' " - SED_LINE+=" -e 's!\${{POLICY_USER}}!${POLICY_USER}!g' " - SED_LINE+=" -e 's!\${{POLICY_GROUP}}!${POLICY_GROUP}!g' " - SED_LINE+=" -e 's!\${{KEYSTORE_PASSWD}}!${KEYSTORE_PASSWD}!g' " - SED_LINE+=" -e 's!\${{TRUSTSTORE_PASSWD}}!${TRUSTSTORE_PASSWD}!g' " - SED_LINE+=" -e 's!\${{JAVA_HOME}}!${JAVA_HOME}!g' " - - while read line || [ -n "${line}" ]; do - if [[ -n ${line} ]] && [[ ${line:0:1} != \# ]]; then - name=$(echo "${line%%=*}") - value=$(echo "${line#*=}") - # escape ampersand so that sed does not replace it with the search string - value=$(echo "${value}" | sed -e 's/[\/&]/\\&/g') - if [[ -z ${name} ]] || [[ -z ${value} ]]; then - echo "WARNING: ${line} missing name or value" - fi - SED_LINE+=" -e 's/\${{${name}}}/${value}/g' " + if [[ $DEBUG == y ]]; then + echo "-- ${FUNCNAME[0]} $@ --" + set -x + fi + + local CONF_FILE COMPONENT_ROOT_DIR SED_LINE SED_FILES name value + + CONF_FILE=$1 + COMPONENT_ROOT_DIR=$2 + + SED_LINE="sed -i" + SED_LINE+=" -e 's!\${{POLICY_HOME}}!${POLICY_HOME}!g' " + SED_LINE+=" -e 's!\${{POLICY_USER}}!${POLICY_USER}!g' " + SED_LINE+=" -e 's!\${{POLICY_GROUP}}!${POLICY_GROUP}!g' " + SED_LINE+=" -e 's!\${{KEYSTORE_PASSWD}}!${KEYSTORE_PASSWD}!g' " + SED_LINE+=" -e 's!\${{TRUSTSTORE_PASSWD}}!${TRUSTSTORE_PASSWD}!g' " + SED_LINE+=" -e 's!\${{JAVA_HOME}}!${JAVA_HOME}!g' " + + while read line || [ -n "${line}" ]; do + if [[ -n ${line} ]] && [[ ${line:0:1} != \# ]]; then + name=$(echo "${line%%=*}") + value=$(echo "${line#*=}") + # escape ampersand so that sed does not replace it with the search string + value=$(echo "${value}" | sed -e 's/[\/&]/\\&/g') + if [[ -z ${name} ]] || [[ -z ${value} ]]; then + echo "WARNING: ${line} missing name or value" + fi + SED_LINE+=" -e 's/\${{${name}}}/${value}/g' " + fi + done <"$CONF_FILE" + + SED_FILES="" + for sed_file in $(find "${COMPONENT_ROOT_DIR}" -type f -exec grep -Iq . {} \; -print 2>/dev/null); do + if fgrep -l '${{' ${sed_file} >/dev/null 2>&1; then + SED_FILES+="${sed_file} " fi - done < "$CONF_FILE" - - SED_FILES="" - for sed_file in $(find "${COMPONENT_ROOT_DIR}" -type f -exec grep -Iq . {} \; -print 2> /dev/null); do - if fgrep -l '${{' ${sed_file} > /dev/null 2>&1; then - SED_FILES+="${sed_file} " - fi - done - - if [[ -z ${SED_FILES} ]]; then - echo "WARNING: no files to perform variable expansion" - else - SED_LINE+=${SED_FILES} - eval "${SED_LINE}" - fi + done + + if [[ -z ${SED_FILES} ]]; then + echo "WARNING: no files to perform variable expansion" + else + SED_LINE+=${SED_FILES} + eval "${SED_LINE}" + fi } function configure_settings() { - if [[ $DEBUG == y ]]; then - echo "-- ${FUNCNAME[0]} $@ --" - set -x - fi - - # The goal is to have repositories for both 'release' and 'snapshot' - # artifacts. These may either be remote (e.g. Nexus) repositories, or - # a local file-based repository. - local fileRepoID=file-repository - local fileRepoUrl=file:$HOME_M2/file-repository - mkdir -p "${fileRepoUrl#file:}" - - # The following parameters are also used outside of this function. - # if SNAPSHOT_REPOSITORY_URL and/or RELEASE_REPOSITORY_URL is defined, - # the corresponding ID and url will be updated below - releaseRepoID=${fileRepoID} - releaseRepoUrl=${fileRepoUrl} - snapshotRepoID=${fileRepoID} - snapshotRepoUrl=${fileRepoUrl} - - # if both SNAPSHOT_REPOSITORY_URL and RELEASE_REPOSITORY_URL are null, - # use standalone-settings.xml that just defines the file-based repo. - # if only one of them is specified, use file-based repo for the other. - - ${POLICY_HOME}/bin/configure-maven - - if [[ -n "${SNAPSHOT_REPOSITORY_URL}" ]] ; then - snapshotRepoID=${SNAPSHOT_REPOSITORY_ID} - snapshotRepoUrl=${SNAPSHOT_REPOSITORY_URL} - fi - - if [[ -n "${RELEASE_REPOSITORY_URL}" ]] ; then - releaseRepoID=${RELEASE_REPOSITORY_ID} - releaseRepoUrl=${RELEASE_REPOSITORY_URL} - fi + if [[ $DEBUG == y ]]; then + echo "-- ${FUNCNAME[0]} $@ --" + set -x + fi + + # The goal is to have repositories for both 'release' and 'snapshot' + # artifacts. These may either be remote (e.g. Nexus) repositories, or + # a local file-based repository. + local fileRepoID=file-repository + local fileRepoUrl=file:$HOME_M2/file-repository + mkdir -p "${fileRepoUrl#file:}" + + # The following parameters are also used outside of this function. + # if SNAPSHOT_REPOSITORY_URL and/or RELEASE_REPOSITORY_URL is defined, + # the corresponding ID and url will be updated below + releaseRepoID=${fileRepoID} + releaseRepoUrl=${fileRepoUrl} + snapshotRepoID=${fileRepoID} + snapshotRepoUrl=${fileRepoUrl} + + # if both SNAPSHOT_REPOSITORY_URL and RELEASE_REPOSITORY_URL are null, + # use standalone-settings.xml that just defines the file-based repo. + # if only one of them is specified, use file-based repo for the other. + + ${POLICY_HOME}/bin/configure-maven + + if [[ -n "${SNAPSHOT_REPOSITORY_URL}" ]]; then + snapshotRepoID=${SNAPSHOT_REPOSITORY_ID} + snapshotRepoUrl=${SNAPSHOT_REPOSITORY_URL} + fi + + if [[ -n "${RELEASE_REPOSITORY_URL}" ]]; then + releaseRepoID=${RELEASE_REPOSITORY_ID} + releaseRepoUrl=${RELEASE_REPOSITORY_URL} + fi } function configure_keystore() { - if [[ $DEBUG == y ]]; then - echo "-- ${FUNCNAME[0]} $@ --" - set -x - fi + if [[ $DEBUG == y ]]; then + echo "-- ${FUNCNAME[0]} $@ --" + set -x + fi local DEFAULT_TRUSTSTORE_PASSWORD='Pol1cy_0nap' local DEFAULT_KEYSTORE_PASSWORD='Pol1cy_0nap' - if [[ -n ${TRUSTSTORE_PASSWD} ]]; then - keytool -storepasswd -storepass "${DEFAULT_TRUSTSTORE_PASSWORD}" -keystore "${POLICY_HOME}/etc/ssl/policy-truststore" -new "${TRUSTSTORE_PASSWD}" - fi + if [[ -n ${TRUSTSTORE_PASSWD} ]]; then + keytool -storepasswd -storepass "${DEFAULT_TRUSTSTORE_PASSWORD}" -keystore "${POLICY_HOME}/etc/ssl/policy-truststore" -new "${TRUSTSTORE_PASSWD}" + fi - if [[ -n ${KEYSTORE_PASSWD} ]]; then - keytool -storepasswd -storepass "${DEFAULT_KEYSTORE_PASSWORD}" -keystore "${POLICY_HOME}/etc/ssl/policy-keystore" -new "${KEYSTORE_PASSWD}" - fi + if [[ -n ${KEYSTORE_PASSWD} ]]; then + keytool -storepasswd -storepass "${DEFAULT_KEYSTORE_PASSWORD}" -keystore "${POLICY_HOME}/etc/ssl/policy-keystore" -new "${KEYSTORE_PASSWD}" + fi } - function check_r_file() { - if [[ $DEBUG == y ]]; then - echo "-- ${FUNCNAME[0]} $@ --" - set -x - fi + if [[ $DEBUG == y ]]; then + echo "-- ${FUNCNAME[0]} $@ --" + set -x + fi - FILE=$1 - if [[ ! -f ${FILE} || ! -r ${FILE} ]]; then + FILE=$1 + if [[ ! -f ${FILE} || ! -r ${FILE} ]]; then return 1 - fi + fi - return 0 + return 0 } -function check_x_file() { - if [[ $DEBUG == y ]]; then - echo "-- ${FUNCNAME[0]} $@ --" - set -x - fi +function check_x_file() { + if [[ $DEBUG == y ]]; then + echo "-- ${FUNCNAME[0]} $@ --" + set -x + fi - FILE=$1 - if [[ ! -f ${FILE} || ! -x ${FILE} ]]; then + FILE=$1 + if [[ ! -f ${FILE} || ! -x ${FILE} ]]; then return 1 - fi + fi - return 0 + return 0 } function install_prereqs() { - if [[ $DEBUG == y ]]; then - echo "-- ${FUNCNAME[0]} $@ --" - set -x - fi - - local CONF_FILE HOME_OWNER - - CONF_FILE=$1 - - if ! check_r_file "${CONF_FILE}"; then - echo "error: aborting ${COMPONENT_TYPE} installation: ${CONF_FILE} is not accessible" - exit 1 - fi - - if ! process_configuration "${CONF_FILE}"; then - echo "error: aborting ${COMPONENT_TYPE} installation: cannot process configuration ${CONF_FILE}" - exit 1 - fi - - if [[ -z ${POLICY_HOME} ]]; then - echo "error: aborting ${COMPONENT_TYPE} installation: ${POLICY_HOME} is not set" - exit 1 - fi - - HOME_OWNER=$(ls -ld "${POLICY_HOME}" | awk '{print $3}') - if [[ ${HOME_OWNER} != ${POLICY_USER} ]]; then - echo "error: aborting ${COMPONENT_TYPE} installation: ${POLICY_USER} does not own ${POLICY_HOME} directory" - exit 1 - fi - - echo -n "Starting ${OPERATION} of ${COMPONENT_TYPE} under ${POLICY_USER}:${POLICY_GROUP} " - echo "ownership with umask $(umask)." + if [[ $DEBUG == y ]]; then + echo "-- ${FUNCNAME[0]} $@ --" + set -x + fi + + local CONF_FILE HOME_OWNER + + CONF_FILE=$1 + + if ! check_r_file "${CONF_FILE}"; then + echo "error: aborting ${COMPONENT_TYPE} installation: ${CONF_FILE} is not accessible" + exit 1 + fi + + if ! process_configuration "${CONF_FILE}"; then + echo "error: aborting ${COMPONENT_TYPE} installation: cannot process configuration ${CONF_FILE}" + exit 1 + fi + + if [[ -z ${POLICY_HOME} ]]; then + echo "error: aborting ${COMPONENT_TYPE} installation: ${POLICY_HOME} is not set" + exit 1 + fi + + HOME_OWNER=$(ls -ld "${POLICY_HOME}" | awk '{print $3}') + if [[ ${HOME_OWNER} != ${POLICY_USER} ]]; then + echo "error: aborting ${COMPONENT_TYPE} installation: ${POLICY_USER} does not own ${POLICY_HOME} directory" + exit 1 + fi + + echo -n "Starting ${OPERATION} of ${COMPONENT_TYPE} under ${POLICY_USER}:${POLICY_GROUP} " + echo "ownership with umask $(umask)." } function configure_base() { - if [[ $DEBUG == y ]]; then - echo "-- ${FUNCNAME[0]} $@ --" - set -x - fi - - local BASH_PROFILE_LINE PROFILE_LINE - - # check if fqdn is set in base.conf and use that value if set - if [[ -z ${INSTALL_FQDN} ]] - then - echo "FQDN not set in config...using the default FQDN ${FQDN}" - else - echo "Using FQDN ${INSTALL_FQDN} from config" - FQDN=${INSTALL_FQDN} - fi - - configure_component "${BASE_CONF}" "${POLICY_HOME}" - - configure_settings - configure_keystore - - BASH_PROFILE_LINE=". ${POLICY_HOME}/etc/profile.d/env.sh" - PROFILE_LINE="ps -p \$\$ | grep -q bash || . ${POLICY_HOME}/etc/profile.d/env.sh" - - # Note: adding to .bashrc instead of .bash_profile - if ! fgrep -x "${BASH_PROFILE_LINE}" "${HOME}/.bashrc" >/dev/null 2>&1; then - echo "${BASH_PROFILE_LINE}" >> "${HOME}/.bashrc" - fi - - if ! fgrep -x "${PROFILE_LINE}" "${HOME}/.profile" >/dev/null 2>&1; then - echo "${PROFILE_LINE}" >> "${HOME}/.profile" - fi - - source "${POLICY_HOME}/etc/profile.d/env.sh" - - cat "${POLICY_HOME}"/etc/cron.d/* | crontab + if [[ $DEBUG == y ]]; then + echo "-- ${FUNCNAME[0]} $@ --" + set -x + fi + + local BASH_PROFILE_LINE PROFILE_LINE + + # check if fqdn is set in base.conf and use that value if set + if [[ -z ${INSTALL_FQDN} ]]; then + echo "FQDN not set in config...using the default FQDN ${FQDN}" + else + echo "Using FQDN ${INSTALL_FQDN} from config" + FQDN=${INSTALL_FQDN} + fi + + configure_component "${BASE_CONF}" "${POLICY_HOME}" + + configure_settings + configure_keystore + + BASH_PROFILE_LINE=". ${POLICY_HOME}/etc/profile.d/env.sh" + PROFILE_LINE="ps -p \$\$ | grep -q bash || . ${POLICY_HOME}/etc/profile.d/env.sh" + + # Note: adding to .bashrc instead of .bash_profile + if ! fgrep -x "${BASH_PROFILE_LINE}" "${HOME}/.bashrc" >/dev/null 2>&1; then + echo "${BASH_PROFILE_LINE}" >>"${HOME}/.bashrc" + fi + + if ! fgrep -x "${PROFILE_LINE}" "${HOME}/.profile" >/dev/null 2>&1; then + echo "${PROFILE_LINE}" >>"${HOME}/.profile" + fi + + source "${POLICY_HOME}/etc/profile.d/env.sh" + + cat "${POLICY_HOME}"/etc/cron.d/* | crontab } function install_base() { - if [[ $DEBUG == y ]]; then - echo "-- ${FUNCNAME[0]} $@ --" - set -x - fi - - local POLICY_HOME_CONTENTS BASE_TGZ BASEX_TGZ BASH_PROFILE_LINE - - install_prereqs "${BASE_CONF}" - - # following properties must be set: - # POLICY_HOME - installation directory, must exist and be writable - - # test that all required properties are set - for var in POLICY_HOME JAVA_HOME - do - if [[ -z $(eval echo \$$var) ]]; then - echo "ERROR: $var must be set in $BASE_CONF" - exit 1 - fi - done - - /bin/mkdir -p "${POLICY_HOME}/logs/" > /dev/null 2>&1 - - if [[ ! ( -d "$POLICY_HOME" && -w "$POLICY_HOME" ) ]]; then - echo "ERROR: Installation directory $POLICY_HOME does not exist or not writable" - exit 1 - fi - - if [[ -z ${POLICY_DOCKER} ]]; then - if ! /bin/rm -fr "${POLICY_HOME}"/* > /dev/null 2>&1; then - echo "error: aborting base installation: cannot delete the underlying ${POLICY_HOME} files" - exit 1 - fi - - POLICY_HOME_CONTENTS=$(ls -A "${POLICY_HOME}" 2> /dev/null) - if [[ -n ${POLICY_HOME_CONTENTS} ]]; then - echo "error: aborting base installation: ${POLICY_HOME} directory is not empty" - exit 1 - fi - - if [[ -n ${POLICY_LOGS} ]]; then - if ! /bin/mkdir -p "${POLICY_LOGS}" > /dev/null 2>&1; then - echo "error: aborting base installation: cannot create ${POLICY_LOGS}" - exit 1 - fi - fi - fi - - BASE_TGZ=$(ls base-*.tar.gz) - if [ ! -r ${BASE_TGZ} ]; then - echo "error: aborting: base package is not accessible" - exit 1 - fi - - tar -tzf ${BASE_TGZ} > /dev/null 2>&1 - if [[ $? != 0 ]]; then - echo >&2 "error: aborting installation: invalid base package file: ${BASE_TGZ}" - exit 1 - fi - - BASEX_TGZ=$(ls basex-*.tar.gz 2> /dev/null) - if [ -z ${BASEX_TGZ} ]; then - echo "warning: no basex application package present" - BASEX_TGZ= - else - tar -tzf ${BASEX_TGZ} > /dev/null 2>&1 - if [[ $? != 0 ]]; then - echo >&2 "warning: invalid basex application package tar file: ${BASEX_TGZ}" - BASEX_TGZ= - fi - fi - - # Undo any changes in the $HOME directory if any - - BASH_PROFILE_LINE=". ${POLICY_HOME}/etc/profile.d/env.sh" - - # Note: using .bashrc instead of .bash_profile - if [[ -f ${HOME}/.bashrc ]]; then - /bin/sed -i "\:${BASH_PROFILE_LINE}:d" "${HOME}/.bashrc" - fi - - tar -C ${POLICY_HOME} -xf ${BASE_TGZ} --no-same-owner - if [[ $? != 0 ]]; then - # this should not happened - echo "error: aborting base installation: base package cannot be unpacked: ${BASE_TGZ}" - exit 1 - fi - - if [ ! -z ${BASEX_TGZ} ]; then - tar -C ${POLICY_HOME} -xf ${BASEX_TGZ} --no-same-owner - if [[ $? != 0 ]]; then - # this should not happened - echo "warning: basex package cannot be unpacked: ${BASEX_TGZ}" - fi - fi - - if [[ -d $HOME_M2 ]]; then - echo "Renaming existing $HOME_M2 to $HOME/m2.$TIMESTAMP" - mv $HOME_M2 $HOME/m2.$TIMESTAMP - if [[ $? != 0 ]]; then - echo "WARNING: Failed to rename $HOME_M2 directory; will use old directory" - fi - fi - - mkdir -p ${HOME_M2} - if [[ $? != 0 ]]; then - echo "ERROR: Cannot create ${HOME_M2} directory" - exit 1 - fi + if [[ $DEBUG == y ]]; then + echo "-- ${FUNCNAME[0]} $@ --" + set -x + fi + + local POLICY_HOME_CONTENTS BASE_TGZ BASEX_TGZ BASH_PROFILE_LINE + + install_prereqs "${BASE_CONF}" + + # following properties must be set: + # POLICY_HOME - installation directory, must exist and be writable + + # test that all required properties are set + for var in POLICY_HOME JAVA_HOME; do + if [[ -z $(eval echo \$$var) ]]; then + echo "ERROR: $var must be set in $BASE_CONF" + exit 1 + fi + done + + /bin/mkdir -p "${POLICY_HOME}/logs/" >/dev/null 2>&1 + + if [[ ! (-d "$POLICY_HOME" && -w "$POLICY_HOME") ]]; then + echo "ERROR: Installation directory $POLICY_HOME does not exist or not writable" + exit 1 + fi + + if [[ -z ${POLICY_DOCKER} ]]; then + if ! /bin/rm -fr "${POLICY_HOME}"/* >/dev/null 2>&1; then + echo "error: aborting base installation: cannot delete the underlying ${POLICY_HOME} files" + exit 1 + fi + + POLICY_HOME_CONTENTS=$(ls -A "${POLICY_HOME}" 2>/dev/null) + if [[ -n ${POLICY_HOME_CONTENTS} ]]; then + echo "error: aborting base installation: ${POLICY_HOME} directory is not empty" + exit 1 + fi + + if [[ -n ${POLICY_LOGS} ]]; then + if ! /bin/mkdir -p "${POLICY_LOGS}" >/dev/null 2>&1; then + echo "error: aborting base installation: cannot create ${POLICY_LOGS}" + exit 1 + fi + fi + fi + + BASE_TGZ=$(ls base-*.tar.gz) + if [ ! -r ${BASE_TGZ} ]; then + echo "error: aborting: base package is not accessible" + exit 1 + fi + + tar -tzf ${BASE_TGZ} >/dev/null 2>&1 + if [[ $? != 0 ]]; then + echo >&2 "error: aborting installation: invalid base package file: ${BASE_TGZ}" + exit 1 + fi + + BASEX_TGZ=$(ls basex-*.tar.gz 2>/dev/null) + if [ -z ${BASEX_TGZ} ]; then + echo "warning: no basex application package present" + BASEX_TGZ= + else + tar -tzf ${BASEX_TGZ} >/dev/null 2>&1 + if [[ $? != 0 ]]; then + echo >&2 "warning: invalid basex application package tar file: ${BASEX_TGZ}" + BASEX_TGZ= + fi + fi + + # Undo any changes in the $HOME directory if any + + BASH_PROFILE_LINE=". ${POLICY_HOME}/etc/profile.d/env.sh" + + # Note: using .bashrc instead of .bash_profile + if [[ -f ${HOME}/.bashrc ]]; then + /bin/sed -i "\:${BASH_PROFILE_LINE}:d" "${HOME}/.bashrc" + fi + + tar -C ${POLICY_HOME} -xf ${BASE_TGZ} --no-same-owner + if [[ $? != 0 ]]; then + # this should not happened + echo "error: aborting base installation: base package cannot be unpacked: ${BASE_TGZ}" + exit 1 + fi + + if [ ! -z ${BASEX_TGZ} ]; then + tar -C ${POLICY_HOME} -xf ${BASEX_TGZ} --no-same-owner + if [[ $? != 0 ]]; then + # this should not happened + echo "warning: basex package cannot be unpacked: ${BASEX_TGZ}" + fi + fi + + if [[ -d $HOME_M2 ]]; then + echo "Renaming existing $HOME_M2 to $HOME/m2.$TIMESTAMP" + mv $HOME_M2 $HOME/m2.$TIMESTAMP + if [[ $? != 0 ]]; then + echo "WARNING: Failed to rename $HOME_M2 directory; will use old directory" + fi + fi + + mkdir -p ${HOME_M2} + if [[ $? != 0 ]]; then + echo "ERROR: Cannot create ${HOME_M2} directory" + exit 1 + fi # base.conf properties may have characters with special meaning to bash, # so wrap all the values in quotes in the profile.d version so it can # be sourced into scripts that need the values. Also remove any blanks # that may be present around the = sign. - # save ${BASE_CONF} in PDP-D installation - cp "${BASE_CONF}" "${POLICY_HOME}"/etc/profile.d + # save ${BASE_CONF} in PDP-D installation + cp "${BASE_CONF}" "${POLICY_HOME}"/etc/profile.d sed -i -e "s/ *= */=/" -e "s/=\(.*$\)/='\1'/" ${POLICY_HOME}/etc/profile.d/base.conf - configure_base + configure_base } -function install_controller() -{ - if [[ $DEBUG == y ]]; then - echo "-- ${FUNCNAME[0]} $@ --" - set -x - fi - - if [[ $DEBUG == y ]]; then - echo "-- ${FUNCNAME[0]} $@ --" - set -x - fi - - if [[ -f "${HOME}/.bashrc" ]]; then - source "${HOME}/.bashrc" - fi - - if [[ -z ${POLICY_HOME} ]]; then - echo "error: aborting installation: POLICY_HOME environment variable is not set." - exit 1 - fi - - if ! check_r_file ${POLICY_HOME}/etc/profile.d/env.sh; then - echo "error: aborting installation: ${POLICY_HOME}/etc/profile.d/env.sh is not accessible" - exit 1 - fi - - local CONTROLLER_CONF CONTROLLER_ZIP RULES_JAR SOURCE_DIR CONTROLLER_DIR AAAA BBBB PORT UTOPIC ARTIFACT_VERSION - - CONTROLLER_CONF=$COMPONENT_TYPE.conf - install_prereqs "${CONTROLLER_CONF}" - - # following properties must be set in conf file: - # CONTROLLER_ARTIFACT_ID - Maven artifactId for controller - # CONTROLLER_NAME - directory name for the controller; controller will be installed to - # $POLICY_HOME/controllers/$CONTROLLER_NAME - # CONTROLLER_PORT - port number for the controller REST interface - # RULES_ARTIFACT - rules artifact specifier: groupId:artifactId:version - - # test that all required properties are set - for var in CONTROLLER_ARTIFACT_ID CONTROLLER_NAME CONTROLLER_PORT RULES_ARTIFACT UEB_TOPIC - do - if [[ -z $(eval echo \$$var) ]]; then - echo "ERROR: $var must be set in $CONTROLLER_CONF" - exit 1 - fi - done - - CONTROLLER_ZIP=$(ls $CONTROLLER_ARTIFACT_ID*.zip 2>&-) - if [[ -z $CONTROLLER_ZIP ]]; then - echo "ERROR: Cannot find controller zip file ($CONTROLLER_ARTIFACT_ID*.zip)" - exit 1 - fi - - if [[ ! "$CONTROLLER_NAME" =~ ^[A-Za-z0-9_-]+$ ]]; then - echo "ERROR: CONTROLLER_NAME may only contain alphanumeric, underscore, and dash characters" - exit 1 - fi - - if [[ ! "$CONTROLLER_PORT" =~ ^[0-9]+$ ]]; then - echo "ERROR: CONTROLLER_PORT is not a valid integer" - exit 1 - fi - - # split artifact string into parts - IFS=: read RULES_GROUPID RULES_ARTIFACTID RULES_VERSION <<<$RULES_ARTIFACT - if [[ -z $RULES_GROUPID || -z $RULES_ARTIFACTID || -z $RULES_VERSION ]]; then - echo "ERROR: Invalid setting for RULES_ARTIFACT property" - exit 1 - fi - - #RULES_JAR=$RULES_ARTIFACTID-$RULES_VERSION.jar - RULES_JAR=$(echo ${RULES_ARTIFACTID}-*.jar) - if ! check_r_file $RULES_JAR; then - echo "WARNING: Rules jar file $RULES_JAR not found in installer package, must be installed manually" - RULES_JAR= - fi - - - SOURCE_DIR=$PWD - CONTROLLER_DIR=$POLICY_HOME - - cd $CONTROLLER_DIR - - echo "Unpacking controller zip file" - # use jar command in case unzip not present on system - jar xf $SOURCE_DIR/$CONTROLLER_ZIP - if [[ $? != 0 ]]; then - echo "ERROR: unpack of controller zip file failed, install aborted" - exit 1 - fi - - chmod +x bin/* - - # Perform base variable replacement in controller config file - configure_component "${SOURCE_DIR}/${BASE_CONF}" "${CONTROLLER_DIR}" - - # Perform variable replacements in config files. - # config files may contain the following strings that need to be replaced with - # real values: - # AAAA - artifactId - # BBBB - Substring of AAAA after first dash (stripping initial "ncomp-" or "policy-") - # PORT - Port number for REST server - - echo "Performing variable replacement in config files" - AAAA=$CONTROLLER_ARTIFACT_ID - BBBB=${AAAA#[a-z]*-} - PORT=$CONTROLLER_PORT - UTOPIC=${UEB_TOPIC} - - for file in config/* - do - sed -i -e "s/AAAA/$AAAA/" -e "s/BBBB/$BBBB/" -e "s/PORT/$PORT/" -e "s!\${{UEB_TOPIC}}!${UTOPIC}!" $file - if [[ $? != 0 ]]; then - echo "ERROR: variable replacement failed for file $file, install aborted" - exit 1 - fi - done - - # append properties for rules artifact to server properties - cat >>config/server.properties <&-) + if [[ -z $CONTROLLER_ZIP ]]; then + echo "ERROR: Cannot find controller zip file ($CONTROLLER_ARTIFACT_ID*.zip)" + exit 1 + fi + + if [[ ! "$CONTROLLER_NAME" =~ ^[A-Za-z0-9_-]+$ ]]; then + echo "ERROR: CONTROLLER_NAME may only contain alphanumeric, underscore, and dash characters" + exit 1 + fi + + if [[ ! "$CONTROLLER_PORT" =~ ^[0-9]+$ ]]; then + echo "ERROR: CONTROLLER_PORT is not a valid integer" + exit 1 + fi + + # split artifact string into parts + IFS=: read RULES_GROUPID RULES_ARTIFACTID RULES_VERSION <<<$RULES_ARTIFACT + if [[ -z $RULES_GROUPID || -z $RULES_ARTIFACTID || -z $RULES_VERSION ]]; then + echo "ERROR: Invalid setting for RULES_ARTIFACT property" + exit 1 + fi + + #RULES_JAR=$RULES_ARTIFACTID-$RULES_VERSION.jar + RULES_JAR=$(echo ${RULES_ARTIFACTID}-*.jar) + if ! check_r_file $RULES_JAR; then + echo "WARNING: Rules jar file $RULES_JAR not found in installer package, must be installed manually" + RULES_JAR= + fi + + SOURCE_DIR=$PWD + CONTROLLER_DIR=$POLICY_HOME + + cd $CONTROLLER_DIR + + echo "Unpacking controller zip file" + # use jar command in case unzip not present on system + jar xf $SOURCE_DIR/$CONTROLLER_ZIP + if [[ $? != 0 ]]; then + echo "ERROR: unpack of controller zip file failed, install aborted" + exit 1 + fi + + chmod +x bin/* + + # Perform base variable replacement in controller config file + configure_component "${SOURCE_DIR}/${BASE_CONF}" "${CONTROLLER_DIR}" + + # Perform variable replacements in config files. + # config files may contain the following strings that need to be replaced with + # real values: + # AAAA - artifactId + # BBBB - Substring of AAAA after first dash (stripping initial "ncomp-" or "policy-") + # PORT - Port number for REST server + + echo "Performing variable replacement in config files" + AAAA=$CONTROLLER_ARTIFACT_ID + BBBB=${AAAA#[a-z]*-} + PORT=$CONTROLLER_PORT + UTOPIC=${UEB_TOPIC} + + for file in config/*; do + sed -i -e "s/AAAA/$AAAA/" -e "s/BBBB/$BBBB/" -e "s/PORT/$PORT/" -e "s!\${{UEB_TOPIC}}!${UTOPIC}!" $file + if [[ $? != 0 ]]; then + echo "ERROR: variable replacement failed for file $file, install aborted" + exit 1 + fi + done + + # append properties for rules artifact to server properties + cat >>config/server.properties < ... @@ -582,74 +574,71 @@ EOF # the specified attributes (e.g. 'groupId', 'artifactId', 'version'). The # attributes are returned as environment variables with the associated name. -function getPomAttributes -{ - local tab=$'\t' - local rval=0 - local file="$1" - local attr - local value - shift - for attr in "$@" ; do - # Try to fetch the parameter associated with the 'pom.xml' file. - # Initially, the 'parent' element is excluded. If the desired - # parameter is not found, the 'parent' element is included in the - # second attempt. - value=$(sed -n \ - -e '//,/<\/parent>/d' \ - -e '//,/<\/dependencies>/d' \ - -e '//,/<\/build>/d' \ - -e "/^[ ${tab}]*<${attr}>\([^<]*\)<\/${attr}>.*/{s//\1/p;}" \ - <"${file}") - - if [[ "${value}" == "" ]] ; then - # need to check parent for parameter - value=$(sed -n \ - -e '//,/<\/dependencies>/d' \ - -e '//,/<\/build>/d' \ - -e "/^[ ${tab}]*<${attr}>\([^<]*\)<\/${attr}>.*/{s//\1/p;}" \ - <"${file}") - if [[ "${value}" == "" ]] ; then - echo "${file}: Can't determine ${attr}" >&2 - rval=1 - fi - fi - # the following sets an environment variable with the name referred - # to by ${attr} - read ${attr} <<<"${value}" - done - return ${rval} +function getPomAttributes() { + local tab=$'\t' + local rval=0 + local file="$1" + local attr + local value + shift + for attr in "$@"; do + # Try to fetch the parameter associated with the 'pom.xml' file. + # Initially, the 'parent' element is excluded. If the desired + # parameter is not found, the 'parent' element is included in the + # second attempt. + value=$(sed -n \ + -e '//,/<\/parent>/d' \ + -e '//,/<\/dependencies>/d' \ + -e '//,/<\/build>/d' \ + -e "/^[ ${tab}]*<${attr}>\([^<]*\)<\/${attr}>.*/{s//\1/p;}" \ + <"${file}") + + if [[ "${value}" == "" ]]; then + # need to check parent for parameter + value=$(sed -n \ + -e '//,/<\/dependencies>/d' \ + -e '//,/<\/build>/d' \ + -e "/^[ ${tab}]*<${attr}>\([^<]*\)<\/${attr}>.*/{s//\1/p;}" \ + <"${file}") + if [[ "${value}" == "" ]]; then + echo "${file}: Can't determine ${attr}" >&2 + rval=1 + fi + fi + # the following sets an environment variable with the name referred + # to by ${attr} + read ${attr} <<<"${value}" + done + return ${rval} } - # Usage: installPom # # This function installs a 'pom.xml' file in the local repository -function installPom -{ - # need to extract attributes from POM file - if getPomAttributes "${1}" artifactId groupId version ; then - local repoID repoUrl - if [[ "${version}" =~ SNAPSHOT ]] ; then - repoID=${snapshotRepoID} - repoUrl=${snapshotRepoUrl} - else - repoID=${releaseRepoID} - repoUrl=${releaseRepoUrl} - fi - echo "${1}: Deploying POM artifact to remote repository" - mvn deploy:deploy-file -Dfile="$1" \ - -Dpackaging=pom -DgeneratePom=false \ - -DgroupId=${groupId} \ - -DartifactId=${artifactId} \ - -Dversion=${version} \ - -DrepositoryId=${repoID} -Durl=${repoUrl} \ - -DupdateReleaseInfo=true - else - echo "${1}: Can't install pom due to missing attributes" >&2 - return 1 - fi +function installPom() { + # need to extract attributes from POM file + if getPomAttributes "${1}" artifactId groupId version; then + local repoID repoUrl + if [[ "${version}" =~ SNAPSHOT ]]; then + repoID=${snapshotRepoID} + repoUrl=${snapshotRepoUrl} + else + repoID=${releaseRepoID} + repoUrl=${releaseRepoUrl} + fi + echo "${1}: Deploying POM artifact to remote repository" + mvn deploy:deploy-file -Dfile="$1" \ + -Dpackaging=pom -DgeneratePom=false \ + -DgroupId=${groupId} \ + -DartifactId=${artifactId} \ + -Dversion=${version} \ + -DrepositoryId=${repoID} -Durl=${repoUrl} \ + -DupdateReleaseInfo=true + else + echo "${1}: Can't install pom due to missing attributes" >&2 + return 1 + fi } # Usage: installJar @@ -657,148 +646,147 @@ function installPom # This function installs a JAR file in the local repository, as well as # the 'pom.xml' member it contains. -function installJar -{ - local dir=$(mktemp -d) - local jar="${1##*/}" - cp -p "${1}" "${dir}/${jar}" - - ( - local rval=0 - cd "${dir}" - # determine name of 'pom' file within JAR - local pom=$(jar tf ${jar} META-INF | grep '/pom\.xml$' | head -1) - if [[ "${pom}" ]] ; then - # extract pom file - jar xf ${jar} "${pom}" - - # determine version from pom file - if getPomAttributes "${pom}" version ; then - local repoID repoUrl - if [[ "${version}" =~ SNAPSHOT ]] ; then - repoID=${snapshotRepoID} - repoUrl=${snapshotRepoUrl} - else - repoID=${releaseRepoID} - repoUrl=${releaseRepoUrl} - fi - echo "${1}: Deploying JAR artifact to remote repository" - mvn deploy:deploy-file \ - -Dfile=${jar} \ - -Dversion=${version} \ - -Dpackaging=jar -DgeneratePom=false -DpomFile=${pom} \ - -DrepositoryId=${repoID} -Durl=${repoUrl} \ - -DupdateReleaseInfo=true - else - echo "${1}: Can't determine version from 'pom.xml'" >&2 - rval=1 - fi - else - echo "${1}: Can't find 'pom.xml'" >&2 - rval=1 - fi - rm -rf ${dir} - return ${rval} - ) +function installJar() { + local dir=$(mktemp -d) + local jar="${1##*/}" + cp -p "${1}" "${dir}/${jar}" + + ( + local rval=0 + cd "${dir}" + # determine name of 'pom' file within JAR + local pom=$(jar tf ${jar} META-INF | grep '/pom\.xml$' | head -1) + if [[ "${pom}" ]]; then + # extract pom file + jar xf ${jar} "${pom}" + + # determine version from pom file + if getPomAttributes "${pom}" version; then + local repoID repoUrl + if [[ "${version}" =~ SNAPSHOT ]]; then + repoID=${snapshotRepoID} + repoUrl=${snapshotRepoUrl} + else + repoID=${releaseRepoID} + repoUrl=${releaseRepoUrl} + fi + echo "${1}: Deploying JAR artifact to remote repository" + mvn deploy:deploy-file \ + -Dfile=${jar} \ + -Dversion=${version} \ + -Dpackaging=jar -DgeneratePom=false -DpomFile=${pom} \ + -DrepositoryId=${repoID} -Durl=${repoUrl} \ + -DupdateReleaseInfo=true + else + echo "${1}: Can't determine version from 'pom.xml'" >&2 + rval=1 + fi + else + echo "${1}: Can't find 'pom.xml'" >&2 + rval=1 + fi + rm -rf ${dir} + return ${rval} + ) } # Unzip the 'artifacts-*.zip' file, and install all of the associated # artifacts into the local repository. -function installArtifacts -{ - local file - if [[ -f $(echo artifacts-*.zip) ]] ; then - # use jar command in case unzip not present on system - jar xf artifacts-*.zip - for file in artifacts/* ; do - case "${file}" in - *pom.xml|*.pom) installPom "${file}";; - *.jar) installJar "${file}";; - *) echo "${file}: Don't know how to install artifact" >&2;; - esac - done - fi +function installArtifacts() { + local file + if [[ -f $(echo artifacts-*.zip) ]]; then + # use jar command in case unzip not present on system + jar xf artifacts-*.zip + for file in artifacts/*; do + case "${file}" in + *pom.xml | *.pom) installPom "${file}" ;; + *.jar) installJar "${file}" ;; + *) echo "${file}: Don't know how to install artifact" >&2 ;; + esac + done + fi } -function installFeatures -{ - if [[ $DEBUG == y ]]; then - echo "-- ${FUNCNAME[0]} $@ --" - set -x - fi - - local name featureConf - export FEATURES_HOME="${POLICY_HOME}/${FEATURES_DIR}" - echo "FEATURES_HOME is ${FEATURES_HOME}" - - mkdir -p "${FEATURES_HOME}" > /dev/null 2>&1 - if [[ -d "${FEATURES_HOME}" && -x "${FEATURES_HOME}" ]]; then - SOURCE_DIR=$PWD - for feature in feature-*.zip ; do - name="${feature#feature-}" - name="${name%%-[0-9]*\.zip}" - mkdir -p "${FEATURES_HOME}/${name}" > /dev/null 2>&1 - (cd "${FEATURES_HOME}/${name}"; jar xf ${SOURCE_DIR}/${feature}) - featureConf="feature-${name}.conf" - if [[ -r "${featureConf}" ]]; then - configure_component "${featureConf}" "${FEATURES_HOME}" - cp "${featureConf}" "${POLICY_HOME}"/etc/profile.d - sed -i -e "s/ *= */=/" -e "s/=\(.*$\)/='\1'/" "${POLICY_HOME}/etc/profile.d/${featureConf}" - echo "feature ${name} has been installed (configuration present)" - else - echo "feature ${name} has been installed (no configuration present)" - fi - done - - echo "applying base configuration to features" - configure_component "${BASE_CONF}" "${FEATURES_HOME}" - else - echo "error: aborting ${FEATURES_HOME} is not accessible" - exit 1 - fi +function installFeatures() { + if [[ $DEBUG == y ]]; then + echo "-- ${FUNCNAME[0]} $@ --" + set -x + fi + + local name featureConf + export FEATURES_HOME="${POLICY_HOME}/${FEATURES_DIR}" + echo "FEATURES_HOME is ${FEATURES_HOME}" + + mkdir -p "${FEATURES_HOME}" >/dev/null 2>&1 + if [[ -d "${FEATURES_HOME}" && -x "${FEATURES_HOME}" ]]; then + SOURCE_DIR=$PWD + for feature in feature-*.zip; do + name="${feature#feature-}" + name="${name%%-[0-9]*\.zip}" + mkdir -p "${FEATURES_HOME}/${name}" >/dev/null 2>&1 + ( + cd "${FEATURES_HOME}/${name}" + jar xf ${SOURCE_DIR}/${feature} + ) + featureConf="feature-${name}.conf" + if [[ -r "${featureConf}" ]]; then + configure_component "${featureConf}" "${FEATURES_HOME}" + cp "${featureConf}" "${POLICY_HOME}"/etc/profile.d + sed -i -e "s/ *= */=/" -e "s/=\(.*$\)/='\1'/" "${POLICY_HOME}/etc/profile.d/${featureConf}" + echo "feature ${name} has been installed (configuration present)" + else + echo "feature ${name} has been installed (no configuration present)" + fi + done + + echo "applying base configuration to features" + configure_component "${BASE_CONF}" "${FEATURES_HOME}" + else + echo "error: aborting ${FEATURES_HOME} is not accessible" + exit 1 + fi } -function do_install() -{ - if [[ $DEBUG == y ]]; then - echo "-- ${FUNCNAME[0]} $@ --" - set -x - fi - - echo "Starting installation at $(date) at ${PWD}" - echo - - COMPONENT_TYPE=base - BASE_CONF=base.conf - install_base - component_preinstall - - COMPONENT_TYPE=policy-management - install_controller - - installFeatures - installArtifacts - - appInstallers=$(ls apps*installer 2> /dev/null) +function do_install() { + if [[ $DEBUG == y ]]; then + echo "-- ${FUNCNAME[0]} $@ --" + set -x + fi + + echo "Starting installation at $(date) at ${PWD}" + echo + + COMPONENT_TYPE=base + BASE_CONF=base.conf + install_base + component_preinstall + + COMPONENT_TYPE=policy-management + install_controller + + installFeatures + installArtifacts + + appInstallers=$(ls apps*installer 2>/dev/null) for appInstaller in ${appInstallers}; do echo "Executing application installer ${appInstaller} .." source ${appInstaller} done - echo - echo "Installation complete" - echo "Please logoff and login again to update shell environment" - + echo + echo "Installation complete" + echo "Please logoff and login again to update shell environment" + } export POLICY_USER=$(/usr/bin/id -un) export POLICY_GROUP=$POLICY_USER - -FQDN=$(hostname -f 2> /dev/null) + +FQDN=$(hostname -f 2>/dev/null) if [[ $? != 0 || -z ${FQDN} ]]; then - echo "error: cannot determine the FQDN for this host $(hostname)." - exit 1 + echo "error: cannot determine the FQDN for this host $(hostname)." + exit 1 fi TIMESTAMP=$(date "+%Y%m%d-%H%M%S") -- cgit 1.2.3-korg