Initial OpenECOMP policy/drools-pdp commit

Change-Id: I0072ccab6f40ed32da39667f9f8523b6d6dad2e2
Signed-off-by: Pamela Dragosh <pdragosh@research.att.com>

11 files changed, 745 insertions, 0 deletions

diff --git a/policy-management/src/main/server/config/IntegrityMonitor.properties b/policy-management/src/main/server/config/IntegrityMonitor.properties
new file mode 100644
index 00000000..1201a9da
--- /dev/null
+++ b/policy-management/src/main/server/config/IntegrityMonitor.properties
@@ -0,0 +1,81 @@
+###
+# ============LICENSE_START=======================================================
+# policy-management
+# ================================================================================
+# Copyright (C) 2017 AT&T Intellectual Property. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+# 
+#      http://www.apache.org/licenses/LICENSE-2.0
+# 
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+###
+
+hostPort = ${{host_port}}
+
+# The following were added as part of US673632
+#
+# Forward Progress Monitor update interval seconds
+fp_monitor_interval = ${{fp_monitor_interval}}
+# Failed counter threshold before failover 
+failed_counter_threshold = ${{failed_counter_threshold}}
+# Interval between test transactions when no traffic seconds
+test_trans_interval = ${{test_trans_interval}}
+# Interval between writes of the FPC to the DB seconds 
+write_fpc_interval = ${{write_fpc_interval}}
+# Name of the site in which this node is hosted 
+site_name = ${{site_name}}
+# Node type
+# Note: Make sure you don't leave any trailing spaces, or you'll get an 'invalid node type' error! 
+node_type = pdp_drools
+# Dependency groups are groups of resources upon which a node operational state is dependent upon. 
+# Each group is a comma-separated list of resource names and groups are separated by a semicolon.  For example:
+dependency_groups=${{dependency_groups}}
+# When set to true, dependent health checks are performed by using JMX to invoke test() on the dependent.
+# The default false is to use state checks for health.
+test_via_jmx=${{test_via_jmx}}
+# This is the max number of seconds beyond which a non incrementing FPC is considered a failure
+max_fpc_update_interval=${{max_fpc_update_interval}}
+
+# Needed by DroolsPdpsElectionHandler
+pdp.checkInterval=7000
+pdp.updateInterval=10000
+#pdp.timeout=3000
+# Need long timeout, because testTransaction is only run every 10 seconds.
+pdp.timeout=15000
+#how long do we wait for the pdp table to populate on initial startup
+pdp.initialWait=20000
+
+# Known as the PDPID in the droolpdpentity table.
+#resource.name=pdp1
+resource.name=${{resource_name}}
+
+# The amount of this a resource (entity) should sleep between audit executions.
+# If not specified, defaults to five seconds.
+# -1 turns off audit
+# zero forces audit to run continuously
+integrity_audit_period_seconds=-1
+
+# Properties needed for repository audit
+repository.audit.id=${{repositoryID}}
+repository.audit.url=${{repositoryUrl}}
+repository.audit.username=${{repositoryUsername}}
+repository.audit.password=${{repositoryPassword}}
+
+# Flag to control the execution of the subsystemTest for the Database
+db.audit.is.active=false
+
+# Flag to control the execution of the subsystemTest for the Nexus Maven repository
+repository.audit.is.active=false
+
+
+
+
+
diff --git a/policy-management/src/main/server/config/controller.properties.README b/policy-management/src/main/server/config/controller.properties.README
new file mode 100644
index 00000000..8421cf40
--- /dev/null
+++ b/policy-management/src/main/server/config/controller.properties.README
@@ -0,0 +1,153 @@
+#
+# *-controller.properties configuration
+#
+#
+# The <controller-name>-controller.properties file define the
+# configuration aspects of a give controller at initialization time.
+#
+# It contains 3 major sections:
+#
+# 1. CONTROLLER
+# 2. DMAAP
+# 4. UEB
+# 5. DROOLS
+#
+# 1. CONTROLLER
+#
+# controller.name: controller unique name identifier.
+#
+# 2. DMAAP:
+#    2.1. DMAAP Sources Information
+#         2.1.1. Topics that this controller supports over DMAAP.
+#         2.1.1. DMAAP Network Information for each topic.
+#         2.1.2. Decoders information for each topic to map network input to
+#                an object that will be injected into its appropriate drools
+#                sessions.
+#         2.1.3. Filtering information for each decoder, to filter out from
+#                drools, messages that should not be processed. 
+#    2.2. DMAAP Sinks Information
+#         2.2.1. Topics that this controller supports over DMAAP.
+#         2.2.2. DMAAP Network Information for each topic.
+#         2.2.3. Encoders information for each topic to map a model object
+#                to serialize network output that will be send over the 
+#                appropriate DMAAP topic according to its network information.
+#
+# 2.1 DMAAP Sources
+#
+# dmaap.source.topics:  comma separated list of DMAAP topics source of events.
+# dmaap.source.topics.<aTopic>.servers:  comma separated list of DMAAP servers to poll for events.
+# [optional] dmaap.source.topics.<aTopic>.apiKey=<APIKEY>  : api key       
+# [optional] dmaap.source.topics.<aTopic>.apiSecret=<APISECRET>  : api secret
+# [optional] dmaap.source.topics.<aTopic>.consumerGroup=<CONSUMER-GROUP> : consumer group
+# [optional] dmaap.source.topics.<aTopic>.consumerInstance=<CONSUMER-INSTANCE>  : consumer instance
+# dmaap.source.topics.<aTopic>.events:  comma separated list of classes to which an event can be mapped to,
+#    where <aTopic> must be declared in dmaap.source.topics
+# [optional] dmaap.source.topics.<aTopic>.events.<eventClass>.filter:  comma separated list of conditions in the form of 
+#      pairs of "<field-name>=<field-value-regex>" values, where <field-name> identifies a field of the event, and
+#      <field-value-regex> is a regular expression that that field's value in the event must match
+#      against each particular instantiation of the event for this controller.   Note that multiple 
+#      "<field-name>=<field-value-regex>" are evaluated for acceptance by AND'ing each condition.
+#      Further, <aTopic> must be declared in dmaap.source.topics, and 
+#      <eventClass> in dmaap.source.topics.<aTopic>.events.
+# [optional] dmaap.source.topics.<aTopic>.events.custom.gson:  comma separated pair, where the first item
+#      is a class in the model that contains a gson parser, and the second is the actual gson parser in
+#      the class.   This setting overrides the PDP-D generic framework parsers with an specific model
+#      provided one
+# [optional] dmaap.source.topics.<aTopic>.events.custom.jackson:  comma separated pair, where the first item
+#      is a class in the model that contains a jackson parser, and the second is the actual jackson parser in
+#      the class.   This setting overrides the PDP-D generic framework parsers with an specific model
+#      provided one
+#
+# 2.2 DMAAP Sinks
+#
+# dmaap.sink.topics:  comma separated list of DMAAP topics destination of locally produced events.
+# dmaap.sink.topics.<aTopic>.servers:  comma separated list of DMAAP servers to send events.
+# [optional] dmaap.sink.topics.<aTopic>.apiKey=<API-KEY>  : api key       
+# [optional] dmaap.sink.topics.<aTopic>.apiSecret=<API-SECRET>  : api secret
+# [optional] dmaap.sink.topics.<aTopic>.partitionKey=<PARTITIONKEY> : partition key
+# dmaap.sink.topics.<aTopic>.events:  comma separated list of classes to which an event can be mapped to,
+#    where <aTopic> must be declared in dmaap.sink.topics
+# [optional] dmaap.sink.topics.<aTopic>.events.custom.gson:  comma separated pair, where the first item
+#      is a class in the model that contains a gson parser, and the second is the actual gson parser in
+#      the class.   This setting overrides the PDP-D generic framework parsers with an specific model
+#      provided one
+# [optional] dmaap.sink.topics.<aTopic>.events.custom.jackson:  comma separated pair, where the first item
+#      is a class in the model that contains a jackson parser, and the second is the actual jackson parser in
+#      the class.   This setting overrides the PDP-D generic framework parsers with an specific model
+#      provided one
+#
+# 2. UEB:
+#    2.1. UEB Sources Information
+#         2.1.1. Topics that this controller supports over UEB.
+#         2.1.1. UEB Network Information for each topic.
+#         2.1.2. Decoders information for each topic to map network input to
+#                an object that will be injected into its appropriate drools
+#                sessions.
+#         2.1.3. Filtering information for each decoder, to filter out from
+#                drools, messages that should not be processed. 
+#    2.2. UEB Sinks Information
+#         2.2.1. Topics that this controller supports over UEB.
+#         2.2.2. UEB Network Information for each topic.
+#         2.2.3. Encoders information for each topic to map a model object
+#                to serialize network output that will be send over the 
+#                appropriate UEB topic according to its network information.
+#
+#
+# 2.1 UEB Sources
+#
+# ueb.source.topics:  comma separated list of UEB topics source of events.
+# ueb.source.topics.<aTopic>.servers:  comma separated list of UEB servers to poll for events.
+# [optional] ueb.source.topics.<aTopic>.apiKey=<API-KEY>  : api key       
+# [optional] ueb.source.topics.<aTopic>.apiSecret=<API-SECRET>  : api secret
+# [optional] ueb.source.topics.<aTopic>.consumerGroup=<CONSUMER-GROUP> : consumer group
+# [optional] ueb.source.topics.<aTopic>.consumerInstance=<CONSUMER-INSTANCE>  : consumer instance
+# ueb.source.topics.<aTopic>.events:  comma separated list of classes to which an event can be mapped to,
+#    where <aTopic> must be declared in ueb.source.topics
+# ueb.source.topics.<aTopic>.events.<eventClass>.filter:  comma separated list of conditions in the form of 
+#      pairs of "<field-name>=<field-value-regex>" values, where <field-name> identifies a field of the event, and
+#      <field-value-regex> is a regular expression that that field's value in the event must match
+#      against each particular instantiation of the event for this controller.   Note that multiple 
+#      "<field-name>=<field-value-regex>" are evaluated for acceptance by AND'ing each condition.
+#      Further, <aTopic> must be declared in ueb.source.topics, and 
+#      <eventClass> in ueb.source.topics.<aTopic>.events
+# ueb.source.topics.<aTopic>.events:  comma separated list of classes to which an event can be mapped to,
+#    where <aTopic> must be declared in dmaap.source.topics
+# [optional] ueb.source.topics.<aTopic>.events.<eventClass>.filter:  comma separated list of conditions in the form of 
+#      pairs of "<field-name>=<field-value-regex>" values, where <field-name> identifies a field of the event, and
+#      <field-value-regex> is a regular expression that that field's value in the event must match
+#      against each particular instantiation of the event for this controller.   Note that multiple 
+#      "<field-name>=<field-value-regex>" are evaluated for acceptance by AND'ing each condition.
+#      Further, <aTopic> must be declared in dmaap.source.topics, and 
+#      <eventClass> in dmaap.source.topics.<aTopic>.events.
+# [optional] ueb.source.topics.<aTopic>.events.custom.gson:  comma separated pair, where the first item
+#      is a class in the model that contains a gson parser, and the second is the actual gson parser in
+#      the class.   This setting overrides the PDP-D generic framework parsers with an specific model
+#      provided one
+# [optional] ueb.source.topics.<aTopic>.events.custom.jackson:  comma separated pair, where the first item
+#      is a class in the model that contains a jackson parser, and the second is the actual jackson parser in
+#      the class.   This setting overrides the PDP-D generic framework parsers with an specific model
+#      provided one
+#
+# 2.1 UEB Sinks
+#
+# ueb.sink.topics:  comma separated list of UEB topics destination of locally produced events.
+# ueb.sink.topics.<aTopic>.servers:  comma separated list of UEB servers to send events.
+# [optional] ueb.sink.topics.<aTopic>.apiKey=<APIKEY>  : api key       
+# [optional] ueb.sink.topics.<aTopic>.apiSecret=<APISECRET>  : api secret
+# [optional] ueb.sink.topics.<aTopic>.partitionKey=<PARTITIONKEY> : partition key
+# ueb.sink.topics.<aTopic>.events:  comma separated list of classes to which an event can be mapped to,
+#    where <aTopic> must be declared in ueb.sink.topics
+# [optional] ueb.sink.topics.<aTopic>.events.custom.gson:  comma separated pair, where the first item
+#      is a class in the model that contains a gson parser, and the second is the actual gson parser in
+#      the class.   This setting overrides the PDP-D generic framework parsers with an specific model
+#      provided one
+# [optional] ueb.sink.topics.<aTopic>.events.custom.jackson:  comma separated pair, where the first item
+#      is a class in the model that contains a jackson parser, and the second is the actual jackson parser in
+#      the class.   This setting overrides the PDP-D generic framework parsers with an specific model
+#      provided one
+#
+# 3. DROOLS (Maven Group Coordinates):
+# 
+# rules.groupId: maven group id of rules jar file
+# rules.artifactId: maven artifact id of rules jar file
+# rules.version: comma separated list of versions supported and detected that include the drl.
diff --git a/policy-management/src/main/server/config/droolsPersistence.properties b/policy-management/src/main/server/config/droolsPersistence.properties
new file mode 100644
index 00000000..60793cdc
--- /dev/null
+++ b/policy-management/src/main/server/config/droolsPersistence.properties
@@ -0,0 +1,51 @@
+###
+# ============LICENSE_START=======================================================
+# policy-management
+# ================================================================================
+# Copyright (C) 2017 AT&T Intellectual Property. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+# 
+#      http://www.apache.org/licenses/LICENSE-2.0
+# 
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+###
+
+#javax.persistence.jdbc.driver = org.h2.Driver
+#javax.persistence.jdbc.url  = jdbc:h2:file:./sql/drools
+#javax.persistence.jdbc.user = sa
+#javax.persistence.jdbc.password =
+
+#javax.persistence.jdbc.driver=org.mariadb.jdbc.Driver
+#javax.persistence.jdbc.url=jdbc:mariadb://localhost:3306/drools
+#javax.persistence.jdbc.user=root
+#javax.persistence.jdbc.password=policy
+
+javax.persistence.jdbc.driver = ${{JDBC_DRIVER}}
+javax.persistence.jdbc.url  = ${{JDBC_DROOLS_URL}}
+javax.persistence.jdbc.user = ${{JDBC_USER}}
+javax.persistence.jdbc.password = ${{JDBC_PASSWORD}}
+
+# Needed?
+#javax.persistence.jdbc.driver = org.h2.Driver
+#javax.persistence.jdbc.url  = jdbc:h2:file:./sql/ncomp
+#javax.persistence.jdbc.user = sa
+#javax.persistence.jdbc.password =
+#persistenceDisabled=false
+#javax.persistence.jdbc.driver=org.mariadb.jdbc.Driver
+#javax.persistence.jdbc.url=jdbc:mariadb://192.168.56.30:3306/drools
+#javax.persistence.jdbc.user=patb
+#javax.persistence.jdbc.password=policy
+
+hibernate.dataSource=org.mariadb.jdbc.MySQLDataSource
+
+# For testing purposes, it may be convenient to disable persistence
+persistenceDisabled=false
+
diff --git a/policy-management/src/main/server/config/log4j.properties b/policy-management/src/main/server/config/log4j.properties
new file mode 100644
index 00000000..6ad25643
--- /dev/null
+++ b/policy-management/src/main/server/config/log4j.properties
@@ -0,0 +1,48 @@
+###
+# ============LICENSE_START=======================================================
+# policy-management
+# ================================================================================
+# Copyright (C) 2017 AT&T Intellectual Property. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+# 
+#      http://www.apache.org/licenses/LICENSE-2.0
+# 
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+###
+
+log4j.rootLogger=INFO,stdout
+
+log4j.logger.org.apache.http.headers=INFO,stdout
+log4j.logger.org.apache.http.wire=INFO,stdout
+log4j.logger.networkLogger=INFO,network
+
+log4j.additivity.networkLogger=false
+
+log4j.appender.stdout=org.apache.log4j.RollingFileAppender
+log4j.appender.stdout.layout=org.apache.log4j.PatternLayout
+log4j.appender.stdout.layout.ConversionPattern=%d %5p [%t] %m %C:%L%n
+
+log4j.appender.network=org.apache.log4j.RollingFileAppender
+log4j.appender.network.File=logs/network.log
+log4j.appender.network.layout=org.apache.log4j.PatternLayout
+log4j.appender.network.layout.ConversionPattern=[%d|%t]%m%n%n
+log4j.appender.network.MaxFileSize=50MB
+log4j.appender.network.MaxBackupIndex=4
+
+log4j.logger.debugLogger=INFO,debug
+log4j.additivity.debugLogger=false
+log4j.appender.debug=org.apache.log4j.RollingFileAppender
+log4j.appender.debug.File=logs/debug.log
+log4j.appender.debug.layout=org.apache.log4j.PatternLayout
+log4j.appender.debug.layout.ConversionPattern=[%d|%t]%m%n%n
+log4j.appender.debug.MaxFileSize=50MB
+log4j.appender.debug.MaxBackupIndex=4
+
diff --git a/policy-management/src/main/server/config/logback.xml b/policy-management/src/main/server/config/logback.xml
new file mode 100644
index 00000000..545b6f48
--- /dev/null
+++ b/policy-management/src/main/server/config/logback.xml
@@ -0,0 +1,211 @@
+<!--
+  ============LICENSE_START=======================================================
+  policy-management
+  ================================================================================
+  Copyright (C) 2017 AT&T Intellectual Property. All rights reserved.
+  ================================================================================
+  Licensed under the Apache License, Version 2.0 (the "License");
+  you may not use this file except in compliance with the License.
+  You may obtain a copy of the License at
+  
+       http://www.apache.org/licenses/LICENSE-2.0
+  
+  Unless required by applicable law or agreed to in writing, software
+  distributed under the License is distributed on an "AS IS" BASIS,
+  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  See the License for the specific language governing permissions and
+  limitations under the License.
+  ============LICENSE_END=========================================================
+  -->
+
+<configuration scan="true" scanPeriod="3 seconds" debug="true">
+  <!--<jmxConfigurator /> -->
+  <!-- directory path for all other type logs -->
+  <property name="logDir" value="logs" />
+  
+  <!-- directory path for debugging type logs -->
+  <property name="debugDir" value="debug-logs" />
+  
+  <!--  specify the component name 
+    <ECOMP-component-name>::= "MSO" | "DCAE" | "ASDC " | "AAI" |"Policy" | "SDNC" | "AC"  -->
+  <property name="componentName" value="Policy"></property>
+  
+  <!--  log file names -->
+  <property name="errorLogName" value="error" />
+  <property name="metricsLogName" value="metrics" />
+  <property name="auditLogName" value="audit" />
+  <property name="debugLogName" value="debug" />
+  <!-- modified time stamp format -->
+  <property name="defaultPattern" value="%X{BeginTimestamp}|%X{EndTimestamp}|%X{RequestId}|%X{ServiceInstanceId}|%thread|%X{ServerName}|%X{ServiceName}|%X{PartnerName}|%X{TargetEntity}|%X{TargetServiceName}|%X{StatusCode}|%X{ResponseCode}|%X{ResponseDescription}|%X{InstanceUUID}|%.-5level|%X{AlertSeverity}|%X{ServerIPAddress}|%X{ElapsedTime}|%X{ServerFQDN}|%X{RemoteHost}|%X{ClassName}||%X{ProcessKey}|%X{TargetVirtualEntity}|%X{CustomField1}|%X{CustomField2}|%X{CustomField3}|%X{CustomField4}|%msg%n" />
+  <property name="defaultMetricPattern" value="%X{BeginTimestamp}|%X{EndTimestamp}|%X{RequestId}|%X{ServiceInstanceId}|%thread|%X{ServerName}|%X{ServiceName}|%X{PartnerName}|%X{TargetEntity}|%X{TargetServiceName}|%X{StatusCode}|%X{ResponseCode}|%X{ResponseDescription}|%X{InstanceUUID}|%.-5level|%X{AlertSeverity}|%X{ServerIPAddress}|%X{ElapsedTime}|%X{ServerFQDN}|%X{RemoteHost}|%X{ClassName}||%X{ProcessKey}|%X{TargetVirtualEntity}|%X{CustomField1}|%X{CustomField2}|%X{CustomField3}|%X{CustomField4}|%msg%n" />
+  <property name="defaultAuditPattern" value="%X{BeginTimestamp}|%X{EndTimestamp}|%X{RequestId}|%X{ServiceInstanceId}|%thread|%X{ServerName}|%X{ServiceName}|%X{PartnerName}|%X{StatusCode}|%X{ResponseCode}|%X{ResponseDescription}|%X{InstanceUUID}|%.-5level|%X{AlertSeverity}|%X{ServerIPAddress}|%X{ElapsedTime}|%X{ServerFQDN}|%X{RemoteHost}|%X{ClassName}||%X{ProcessKey}|%X{TargetVirtualEntity}|%X{CustomField1}|%X{CustomField2}|%X{CustomField3}|%X{CustomField4}|%msg%n" />
+  <property name="defaultErrorPattern" value="%d{yyyy-MM-dd'T'HH:mm:ss.SSS+00:00, UTC}|%X{RequestId}|%thread|%X{ServiceName}|%X{PartnerName}|%X{TargetEntity}|%X{TargetServiceName}|%X{ErrorCategory}|%X{ErrorCode}|%X{ErrorDesciption}|%msg%n" />
+  
+  <property name="defaultPatternOld" value="%d{MM/dd-HH:mm:ss.SSS}|%logger|%X{RequestId}|%X{ServiceInstanceId}|%thread|%X{ServiceName}|%X{InstanceUUID}|%.-5level|%X{AlertSeverity}|%X{ServerIPAddress}|%X{ServerFQDN}|%X{RemoteHost}|%X{ClassName}|%X{Timer}|%msg%n" />
+  
+   <property name="debugLoggerPattern" value="%d{yyyy-MM-dd'T'HH:mm:ss.SSS+00:00, UTC}|%X{RequestId}|%X{ClassName}|%msg%n" />  
+<!--  <property name="debugLoggerPattern" value="%X{BeginTimestamp}|%X{EndTimestamp}|%X{RequestId}|%X{ServiceInstanceId}|%thread|%X{ServerName}|%X{ServiceName}|%X{PartnerName}|%X{StatusCode}|%X{ResponseCode}|%X{ResponseDescription}|%X{ServiceName}|%X{InstanceUUID}|%.-5level|%X{AlertSeverity}|%X{ServerIPAddress}|%X{ElapsedTime}|%X{ServerFQDN}|%X{RemoteHost}|%X{ClassName}||%X{ProcessKey}|%X{CustomField1}|%X{CustomField2}|%X{CustomField3}|%X{CustomField4}|%msg%n" /> -->
+ 
+  <property name="debugLoggerPatternOld" value="%d{MM/dd-HH:mm:ss.SSS}|%X{RequestId}|%X{ServiceInstanceId}|%thread|%X{ServiceName}|%X{InstanceUUID}|%.-5level|%X{AlertSeverity}|%X{ServerIPAddress}|%X{ServerFQDN}|%X{RemoteHost}|%X{Timer}|[%caller{3}]|%msg%n" />
+  
+  <property name="logDirectory" value="${logDir}/${componentName}" />
+  <property name="debugLogDirectory" value="${logDir}/${componentName}" />
+  
+  
+  <!-- Example evaluator filter applied against console appender -->
+  <appender name="STDOUT" class="ch.qos.logback.core.ConsoleAppender">
+    <encoder>
+      <pattern>${defaultPattern}</pattern>
+    </encoder>
+  </appender>
+
+  <!-- ============================================================================ -->
+  <!-- EELF Appenders -->
+  <!-- ============================================================================ -->
+
+  <!-- The EELFAppender is used to record events to the general application 
+    log -->
+    
+    
+
+  
+  <!-- EELF Audit Appender. This appender is used to record audit engine 
+    related logging events. The audit logger and appender are specializations 
+    of the EELF application root logger and appender. This can be used to segregate 
+    Policy engine events from other components, or it can be eliminated to record 
+    these events as part of the application root log. -->
+    
+  <appender name="EELFAudit"
+    class="ch.qos.logback.core.rolling.RollingFileAppender">
+    <file>${logDirectory}/${auditLogName}.log</file>
+    <rollingPolicy
+      class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
+      <fileNamePattern>${logDirectory}/${auditLogName}.%i.log.zip
+      </fileNamePattern>
+      <minIndex>1</minIndex>
+      <maxIndex>9</maxIndex>
+    </rollingPolicy>
+    <triggeringPolicy
+      class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
+      <maxFileSize>5MB</maxFileSize>
+    </triggeringPolicy>
+    <encoder>
+         <pattern>${defaultAuditPattern}</pattern>
+    </encoder>
+  </appender>
+  <appender name="asyncEELFAudit" class="ch.qos.logback.classic.AsyncAppender">
+    <queueSize>256</queueSize>
+    <appender-ref ref="EELFAudit" />
+  </appender>
+
+<appender name="EELFMetrics"
+    class="ch.qos.logback.core.rolling.RollingFileAppender">
+    <file>${logDirectory}/${metricsLogName}.log</file>
+    <rollingPolicy
+      class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
+      <fileNamePattern>${logDirectory}/${metricsLogName}.%i.log.zip
+      </fileNamePattern>
+      <minIndex>1</minIndex>
+      <maxIndex>9</maxIndex>
+    </rollingPolicy>
+    <triggeringPolicy
+      class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
+      <maxFileSize>5MB</maxFileSize>
+    </triggeringPolicy>
+    <encoder>
+      <!-- <pattern>"%d{HH:mm:ss.SSS} [%thread] %-5level %logger{1024} - 
+        %msg%n"</pattern> -->
+      <pattern>${defaultMetricPattern}</pattern>
+    </encoder>
+  </appender>
+  
+  
+  <appender name="asyncEELFMetrics" class="ch.qos.logback.classic.AsyncAppender">
+    <queueSize>256</queueSize>
+    <appender-ref ref="EELFMetrics"/>
+  </appender>
+   
+  <appender name="EELFError"
+    class="ch.qos.logback.core.rolling.RollingFileAppender">
+    <file>${logDirectory}/${errorLogName}.log</file>
+    <rollingPolicy
+      class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
+      <fileNamePattern>${logDirectory}/${errorLogName}.%i.log.zip
+      </fileNamePattern>
+      <minIndex>1</minIndex>
+      <maxIndex>9</maxIndex>
+    </rollingPolicy>
+    <filter class="ch.qos.logback.classic.filter.ThresholdFilter">
+     <level>ERROR</level>
+     </filter>
+    <triggeringPolicy
+      class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
+      <maxFileSize>5MB</maxFileSize>
+    </triggeringPolicy>
+    <encoder>
+      <pattern>${defaultErrorPattern}</pattern>
+    </encoder>
+  </appender>
+  
+  <appender name="asyncEELFError" class="ch.qos.logback.classic.AsyncAppender">
+    <queueSize>256</queueSize>
+    <appender-ref ref="EELFError"/>
+  </appender>
+  
+   <appender name="EELFDebug"
+    class="ch.qos.logback.core.rolling.RollingFileAppender">
+    <file>${debugLogDirectory}/${debugLogName}.log</file>
+    <rollingPolicy
+      class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
+      <fileNamePattern>${debugLogDirectory}/${debugLogName}.%i.log.zip
+      </fileNamePattern>
+      <minIndex>1</minIndex>
+      <maxIndex>9</maxIndex>
+    </rollingPolicy>
+    <filter class="ch.qos.logback.classic.filter.ThresholdFilter">
+     <level>INFO</level>
+     </filter>
+    <triggeringPolicy
+      class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
+      <maxFileSize>5MB</maxFileSize>
+    </triggeringPolicy>
+    <encoder>
+      <pattern>${debugLoggerPattern}</pattern>
+    </encoder>
+  </appender>
+  
+  <appender name="asyncEELFDebug" class="ch.qos.logback.classic.AsyncAppender">
+    <queueSize>256</queueSize>
+    <appender-ref ref="EELFDebug" />
+    <includeCallerData>true</includeCallerData>
+  </appender>
+ 
+  
+  <!-- ============================================================================ -->
+  <!--  EELF loggers -->
+  <!-- ============================================================================ -->
+ 
+  <logger name="com.att.eelf.audit" level="info" additivity="false">
+    <appender-ref ref="asyncEELFAudit" />
+  </logger>
+  
+  <logger name="com.att.eelf.metrics" level="info" additivity="false">
+        <appender-ref ref="asyncEELFMetrics" />
+  </logger>
+ 
+    <logger name="com.att.eelf.error" level="error" additivity="false">
+  <appender-ref ref="asyncEELFError" />
+  </logger>
+  
+   <logger name="com.att.eelf.debug" level="info" additivity="false">
+        <appender-ref ref="asyncEELFDebug" />
+  </logger>
+  
+  
+  
+  <root level="INFO">
+        <appender-ref ref="asyncEELFDebug" />
+        <appender-ref ref="asyncEELFError" />
+  </root>
+
+</configuration>
diff --git a/policy-management/src/main/server/config/makefile b/policy-management/src/main/server/config/makefile
new file mode 100644
index 00000000..5a96c541
--- /dev/null
+++ b/policy-management/src/main/server/config/makefile
@@ -0,0 +1,9 @@
+
+restart: stop start
+
+start:
+	bin/policy-management-controller start
+stop:
+	bin/policy-management-controller stop
+console:
+	bin/policy-management-controller console
diff --git a/policy-management/src/main/server/config/policy-engine.properties b/policy-management/src/main/server/config/policy-engine.properties
new file mode 100644
index 00000000..647f7367
--- /dev/null
+++ b/policy-management/src/main/server/config/policy-engine.properties
@@ -0,0 +1,46 @@
+###
+# ============LICENSE_START=======================================================
+# policy-management
+# ================================================================================
+# Copyright (C) 2017 AT&T Intellectual Property. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+# 
+#      http://www.apache.org/licenses/LICENSE-2.0
+# 
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+###
+
+# Policy Engine Configuration
+
+# Configuration Channel Settings: PDPD_CONFIGURATION
+
+ueb.source.topics=${{PDPD_CONFIGURATION_TOPIC}}
+ueb.source.topics.${{PDPD_CONFIGURATION_TOPIC}}.servers=${{PDPD_CONFIGURATION_SERVERS}}
+ueb.source.topics.${{PDPD_CONFIGURATION_TOPIC}}.apiKey=${{PDPD_CONFIGURATION_API_KEY}}
+ueb.source.topics.${{PDPD_CONFIGURATION_TOPIC}}.apiSecret=${{PDPD_CONFIGURATION_API_SECRET}}
+ueb.source.topics.${{PDPD_CONFIGURATION_TOPIC}}.consumerGroup=${{PDPD_CONFIGURATION_CONSUMER_GROUP}}
+ueb.source.topics.${{PDPD_CONFIGURATION_TOPIC}}.consumerInstance=${{PDPD_CONFIGURATION_CONSUMER_INSTANCE}}
+ueb.source.topics.${{PDPD_CONFIGURATION_TOPIC}}.managed=false
+
+ueb.sink.topics=${{PDPD_CONFIGURATION_TOPIC}}
+ueb.sink.topics.${{PDPD_CONFIGURATION_TOPIC}}.servers=${{PDPD_CONFIGURATION_SERVERS}}
+ueb.sink.topics.${{PDPD_CONFIGURATION_TOPIC}}.apiKey=${{PDPD_CONFIGURATION_API_KEY}}
+ueb.sink.topics.${{PDPD_CONFIGURATION_TOPIC}}.apiSecret=${{PDPD_CONFIGURATION_API_SECRET}}
+ueb.sink.topics.${{PDPD_CONFIGURATION_TOPIC}}.partitionKey=${{PDPD_CONFIGURATION_PARTITION_KEY}}
+ueb.sink.topics.${{PDPD_CONFIGURATION_TOPIC}}.managed=false
+
+http.server.services=CONFIG
+http.server.services.CONFIG.host=${{ENGINE_MANAGEMENT_HOST}}
+http.server.services.CONFIG.port=${{ENGINE_MANAGEMENT_PORT}}
+http.server.services.CONFIG.userName=${{ENGINE_MANAGEMENT_USER}}
+http.server.services.CONFIG.password=${{ENGINE_MANAGEMENT_PASSWORD}}
+http.server.services.CONFIG.restPackages=org.openecomp.policy.drools.server.restful
+http.server.services.CONFIG.managed=false
diff --git a/policy-management/src/main/server/config/policy-healthcheck.properties b/policy-management/src/main/server/config/policy-healthcheck.properties
new file mode 100644
index 00000000..51da7ece
--- /dev/null
+++ b/policy-management/src/main/server/config/policy-healthcheck.properties
@@ -0,0 +1,23 @@
+http.server.services=HEALTHCHECK
+http.server.services.HEALTHCHECK.host=0.0.0.0
+http.server.services.HEALTHCHECK.port=6969
+http.server.services.HEALTHCHECK.restClasses=org.openecomp.policy.drools.healthcheck.RestHealthCheck
+http.server.services.HEALTHCHECK.managed=false
+
+http.client.services=PAP,PDP
+
+http.client.services.PAP.host=${{PAP_HOST}}
+http.client.services.PAP.port=9091
+http.client.services.PAP.contextUriPath=pap/test
+http.client.services.PAP.https=false
+http.client.services.PAP.userName=${{PAP_USERNAME}}
+http.client.services.PAP.password=${{PAP_PASSWORD}}
+http.client.services.PAP.managed=true
+
+http.client.services.PDP.host=${{PDP_HOST}}
+http.client.services.PDP.port=8081
+http.client.services.PDP.contextUriPath=pdp/test
+http.client.services.PDP.https=false
+http.client.services.PDP.userName=${{PDP_USERNAME}}
+http.client.services.PDP.password=${{PDP_PASSWORD}}
+http.client.services.PDP.managed=false
diff --git a/policy-management/src/main/server/config/policyLogger.properties b/policy-management/src/main/server/config/policyLogger.properties
new file mode 100644
index 00000000..4a977992
--- /dev/null
+++ b/policy-management/src/main/server/config/policyLogger.properties
@@ -0,0 +1,49 @@
+###
+# ============LICENSE_START=======================================================
+# policy-management
+# ================================================================================
+# Copyright (C) 2017 AT&T Intellectual Property. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+# 
+#      http://www.apache.org/licenses/LICENSE-2.0
+# 
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+###
+
+################################### Set concurrentHashMap and timer info  #######################
+#Timer initial delay and the delay between in milliseconds before task is to be execute.
+timer.delay.time=1000
+#Timer scheduleAtFixedRate period - time in milliseconds between successive task executions.
+check.interval= 30000
+#Longest time an event info can be stored in the concurrentHashMap for logging - in seconds. 
+event.expired.time=86400
+#Size of the concurrentHashMap which stores the event starting time, etc - when its size reaches this limit, the Timer gets executed 
+#to remove all expired records from this concurrentHashMap.
+concurrentHashMap.limit=5000
+#Size of the concurrentHashMap - when its size drops to this point, stop the Timer
+stop.check.point=2500
+################################### Set logging format #############################################
+# set EELF for EELF logging format, set LOG4J for using log4j, set SYSTEMOUT for using system.out.println
+logger.type=EELF
+#################################### Set level for EELF or SYSTEMOUT logging ##################################
+# Set level for debug file. Set DEBUG to enable .info, .warn and .debug; set INFO for enable .info and .warn; set OFF to disable all 
+# Set override flag. Set TRUE for override the level setups in logback.xml. Set FALSE for using the level setups of logback.xml
+override.logback.level.setup=FALSE
+debugLogger.level=INFO
+# Set level for metrics file. Set OFF to disable; set ON to enable
+metricsLogger.level=ON
+# Set level for error file. Set OFF to disable; set ON to enable
+error.level=ON
+# Set level for audit file. Set OFF to disable; set ON to enable
+audit.level=ON
+#################################### Set Policy Component ##################################
+# Set DROOLS for drools PDP. Set XACML to xacml PDP
+policy.component=DROOLS
diff --git a/policy-management/src/main/server/config/system.properties b/policy-management/src/main/server/config/system.properties
new file mode 100644
index 00000000..feffbd00
--- /dev/null
+++ b/policy-management/src/main/server/config/system.properties
@@ -0,0 +1,31 @@
+###
+# ============LICENSE_START=======================================================
+# policy-management
+# ================================================================================
+# Copyright (C) 2017 AT&T Intellectual Property. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+# 
+#      http://www.apache.org/licenses/LICENSE-2.0
+# 
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+###
+
+# system properties passed to controller
+
+# start JMX server port
+com.sun.management.jmxremote.port = 9991
+com.sun.management.jmxremote.authenticate = false
+com.sun.management.jmxremote.ssl = false
+
+javax.net.ssl.keyStore=/opt/app/policy/etc/ssl/policy-keystore
+javax.net.ssl.keyStorePassword = ${{KEYSTORE_PASSWD}}
+javax.net.ssl.trustStore=/opt/app/policy/etc/ssl/policy-keystore
+javax.net.ssl.trustStorePassword = ${{KEYSTORE_PASSWD}}
diff --git a/policy-management/src/main/server/config/xacmlPersistence.properties b/policy-management/src/main/server/config/xacmlPersistence.properties
new file mode 100644
index 00000000..e88d8aaf
--- /dev/null
+++ b/policy-management/src/main/server/config/xacmlPersistence.properties
@@ -0,0 +1,43 @@
+###
+# ============LICENSE_START=======================================================
+# policy-management
+# ================================================================================
+# Copyright (C) 2017 AT&T Intellectual Property. All rights reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+# 
+#      http://www.apache.org/licenses/LICENSE-2.0
+# 
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+###
+
+#javax.persistence.jdbc.driver = org.h2.Driver
+#javax.persistence.jdbc.url  = jdbc:h2:file:./sql/xacml
+#javax.persistence.jdbc.user = sa
+#javax.persistence.jdbc.password =
+
+#javax.persistence.jdbc.driver=org.mariadb.jdbc.Driver
+#javax.persistence.jdbc.url=jdbc:mariadb://127.0.0.1:3306/xacml
+#javax.persistence.jdbc.user=root
+#javax.persistence.jdbc.password=policy
+
+javax.persistence.jdbc.driver = ${{JDBC_DRIVER}}
+javax.persistence.jdbc.url  = ${{JDBC_URL}}
+javax.persistence.jdbc.user = ${{JDBC_USER}}
+javax.persistence.jdbc.password = ${{JDBC_PASSWORD}}
+
+# Needed?
+hibernate.dataSource=org.mariadb.jdbc.MySQLDataSource
+
+# For testing purposes, it may be convenient to disable persistence
+persistenceDisabled=false
+
+
+