From c11bed964af340d790c12df53b3551a5303f4f94 Mon Sep 17 00:00:00 2001 From: jhh Date: Fri, 23 Aug 2019 14:31:30 -0500 Subject: remove usecases archetype Issue-ID: POLICY-1957 Signed-off-by: jhh Change-Id: I90436e2d633bf0e9f6153dd40e164214f309b8dc --- .../src/main/resources/usecases.drl | 1588 ++++++++++++++++++++ 1 file changed, 1588 insertions(+) create mode 100644 controlloop/common/controller-usecases/src/main/resources/usecases.drl (limited to 'controlloop/common/controller-usecases/src/main') diff --git a/controlloop/common/controller-usecases/src/main/resources/usecases.drl b/controlloop/common/controller-usecases/src/main/resources/usecases.drl new file mode 100644 index 000000000..37d7b6936 --- /dev/null +++ b/controlloop/common/controller-usecases/src/main/resources/usecases.drl @@ -0,0 +1,1588 @@ +/* + * ============LICENSE_START======================================================= + * ONAP + * ================================================================================ + * Copyright (C) 2018-2019 AT&T Intellectual Property. All rights reserved. + * ================================================================================ + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * ============LICENSE_END========================================================= + */ + +package org.onap.policy.controlloop; + +import org.onap.policy.controlloop.params.ControlLoopParams; +import org.onap.policy.controlloop.VirtualControlLoopEvent; +import org.onap.policy.controlloop.VirtualControlLoopNotification; +import org.onap.policy.controlloop.ControlLoopEventStatus; +import org.onap.policy.controlloop.ControlLoopNotificationType; +import org.onap.policy.controlloop.ControlLoopLogger; +import org.onap.policy.controlloop.ControlLoopResponse; +import org.onap.policy.controlloop.policy.PolicyResult; +import org.onap.policy.controlloop.policy.ControlLoopPolicy; +import org.onap.policy.controlloop.policy.Policy; +import org.onap.policy.controlloop.eventmanager.ControlLoopEventManager; +import org.onap.policy.controlloop.eventmanager.ControlLoopEventManager.NewEventStatus; +import org.onap.policy.controlloop.eventmanager.ControlLoopOperationManager; +import org.onap.policy.controlloop.utils.ControlLoopUtils; +import org.onap.policy.controlloop.actor.so.SoActorServiceProvider; +import org.onap.policy.aai.AaiNqResponseWrapper; +import org.onap.policy.appc.Request; +import org.onap.policy.appc.Response; +import org.onap.policy.appc.CommonHeader; +import org.onap.policy.appclcm.LcmRequestWrapper; +import org.onap.policy.appclcm.LcmResponseWrapper; +import org.onap.policy.appclcm.LcmRequest; +import org.onap.policy.appclcm.LcmResponse; +import org.onap.policy.appclcm.LcmCommonHeader; +import org.onap.policy.sdnr.PciRequestWrapper; +import org.onap.policy.sdnr.PciResponseWrapper; +import org.onap.policy.sdnr.PciRequest; +import org.onap.policy.sdnr.PciResponse; +import org.onap.policy.vfc.VfcRequest; +import org.onap.policy.vfc.VfcResponse; +import org.onap.policy.vfc.VfcManager; +import org.onap.policy.so.SoManager; +import org.onap.policy.so.SoRequest; +import org.onap.policy.so.SoResponseWrapper; +import org.onap.policy.sdnc.SdncRequest; +import org.onap.policy.sdnc.SdncManager; +import org.onap.policy.sdnc.SdncResponse; +import org.onap.policy.guard.PolicyGuard; +import org.onap.policy.guard.PolicyGuard.LockResult; +import org.onap.policy.guard.TargetLock; +import org.onap.policy.guard.GuardResult; +import org.onap.policy.guard.PolicyGuardRequest; +import org.onap.policy.guard.PolicyGuardResponse; +import org.onap.policy.guard.PolicyGuardXacmlRequestAttributes; +import org.onap.policy.guard.PolicyGuardXacmlHelper; +import org.onap.policy.models.tosca.authorative.concepts.ToscaPolicy; + +import org.yaml.snakeyaml.Yaml; +import org.yaml.snakeyaml.constructor.Constructor; + +import org.slf4j.LoggerFactory; +import org.slf4j.Logger; + +import java.time.Instant; +import java.util.LinkedList; +import java.util.Iterator; + +import org.onap.policy.drools.system.PolicyEngineConstants; + +/* + * This object is to provide support for timeouts + * due to a bug in drools' built-in timers + */ +declare ControlLoopTimer + closedLoopControlName : String + requestId : String + delay : String + expired : boolean + //timerType is the type of timer: either "ClosedLoop" or "Operation" + timerType : String +end + +/* +* +* Called when the ControlLoopParams object has been inserted into working memory from the BRMSGW. +* +*/ +rule "INSERT.PARAMS" + when + $params : ControlLoopParams() + then + + Logger logger = LoggerFactory.getLogger(drools.getRule().getPackage()); + logger.info("{}: {} : YAML=[{}]", $params.getClosedLoopControlName(), $params.getPolicyName() + "." + + drools.getRule().getName(), $params.getControlLoopYaml()); +end + +/* +* +* Called when a Tosca Policy is present. +* +*/ +rule "NEW.TOSCA.POLICY" + when + $policy : ToscaPolicy() + then + + Logger logger = LoggerFactory.getLogger(drools.getRule().getPackage()); + logger.info("{}: [{}|{}|{}|{}]: CONTENT: {}", drools.getRule().getName(), + $policy.getType(), $policy.getTypeVersion(), $policy.getName(), + $policy.getVersion(), $policy); + + ControlLoopParams params = ControlLoopUtils.toControlLoopParams($policy); + if (params != null) { + insert(params); + } +end + +/* + * Remove Control Loop Parameters. + */ +rule "REMOVE.PARAMS" + when + $params : ControlLoopParams( $policyName : getPolicyName(), $policyVersion : getPolicyVersion() ) + not ( ToscaPolicy( getName() == $policyName, getVersion() == $policyVersion ) ) + then + + Logger logger = LoggerFactory.getLogger(drools.getRule().getPackage()); + logger.info("{}: [{}|{}|{}]", drools.getRule().getName(), + $params.getPolicyScope(), $params.getPolicyName(), $params.getPolicyVersion()); + + retract($params); +end + +/* +* +* This rule responds to DCAE Events where there is no manager yet. Either it is +* the first ONSET, or a subsequent badly formed Event (i.e. Syntax error, or is-closed-loop-disabled) +* +*/ +rule "EVENT" + when + $params : ControlLoopParams( $clName : getClosedLoopControlName() ) + $event : VirtualControlLoopEvent( closedLoopControlName == $clName ) + not ( ControlLoopEventManager( closedLoopControlName == $event.getClosedLoopControlName(), + requestId == $event.getRequestId() ) ) + then + + Logger logger = LoggerFactory.getLogger(drools.getRule().getPackage()); + logger.info("{}: {}", $clName, $params.getPolicyName() + "." + drools.getRule().getName()); + + try { + + // + // Check the event, because we need it to not be null when + // we create the ControlLoopEventManager. The ControlLoopEventManager + // will do extra syntax checking as well check if the closed loop is disabled. + // + if ($event.getRequestId() == null) { + VirtualControlLoopNotification notification = new VirtualControlLoopNotification($event); + notification.setNotification(ControlLoopNotificationType.REJECTED); + notification.setFrom("policy"); + notification.setMessage("Missing requestId"); + notification.setPolicyName($params.getPolicyName() + "." + drools.getRule().getName()); + notification.setPolicyScope($params.getPolicyScope()); + notification.setPolicyVersion($params.getPolicyVersion()); + + // + // Let interested parties know + // + PolicyEngineConstants.getManager().deliver("POLICY-CL-MGT", notification); + + // + // Retract it from memory + // + retract($event); + } else if ($event.getClosedLoopEventStatus() != ControlLoopEventStatus.ONSET) { + throw new ControlLoopException($event.getClosedLoopEventStatus() + " received with no prior onset"); + } else { + // + // Create an EventManager + // + ControlLoopEventManager manager = new ControlLoopEventManager($clName, $event.getRequestId()); + // + // Determine if EventManager can actively process the event + // (i.e. syntax, is_closed_loop_disabled checks etc.) + // + VirtualControlLoopNotification notification = manager.activate($params.getControlLoopYaml(), $event); + notification.setFrom("pdp-0001-controller=controlloop"); // Engine.getInstanceName() + notification.setPolicyName($params.getPolicyName() + "." + drools.getRule().getName()); + notification.setPolicyScope($params.getPolicyScope()); + notification.setPolicyVersion($params.getPolicyVersion()); + // + // Are we actively pursuing this event? + // + if (notification.getNotification() == ControlLoopNotificationType.ACTIVE) { + // + // Insert Event Manager into memory, this will now kick off processing. + // + insert(manager); + // + // Let interested parties know + // + PolicyEngineConstants.getManager().deliver("POLICY-CL-MGT", notification); + // + // Setup the Overall Control Loop timer + // + ControlLoopTimer clTimer = new ControlLoopTimer(); + clTimer.setTimerType("ClosedLoop"); + clTimer.setClosedLoopControlName($event.getClosedLoopControlName()); + clTimer.setRequestId($event.getRequestId().toString()); + clTimer.setDelay(manager.getControlLoopTimeout(1500) + "s"); + // + // Insert it + // + insert(clTimer); + } else { + // + // Let interested parties know + // + PolicyEngineConstants.getManager().deliver("POLICY-CL-MGT", notification); + // + // Retract it from memory + // + retract($event); + } + + // + // Now that the manager is inserted into Drools working memory, we'll wait for + // another rule to fire in order to continue processing. This way we can also + // then screen for additional ONSET and ABATED events for this RequestId. + // + } + } catch (Exception e) { + logger.warn("{}: {}", $clName, $params.getPolicyName() + "." + drools.getRule().getName(), e); + + VirtualControlLoopNotification notification = new VirtualControlLoopNotification($event); + notification.setNotification(ControlLoopNotificationType.REJECTED); + notification.setMessage("Exception occurred: " + e.getMessage()); + notification.setPolicyName($params.getPolicyName() + "." + drools.getRule().getName()); + notification.setPolicyScope($params.getPolicyScope()); + notification.setPolicyVersion($params.getPolicyVersion()); + // + // + // + PolicyEngineConstants.getManager().deliver("POLICY-CL-MGT", notification); + // + // Retract the event + // + retract($event); + } +end + +/* +* +* This rule happens when we got a valid ONSET, closed loop is enabled and an Event Manager +* is now created. We can start processing the yaml specification via the Event Manager. +* +*/ +rule "EVENT.MANAGER" + when + $params : ControlLoopParams( $clName : getClosedLoopControlName() ) + $event : VirtualControlLoopEvent( closedLoopControlName == $clName ) + $manager : ControlLoopEventManager( closedLoopControlName == $event.getClosedLoopControlName(), + requestId == $event.getRequestId() ) + $clTimer : ControlLoopTimer( closedLoopControlName == $event.getClosedLoopControlName(), + requestId == $event.getRequestId().toString(), timerType == "ClosedLoop", !expired ) + then + + Logger logger = LoggerFactory.getLogger(drools.getRule().getPackage()); + logger.info("{}: {}: event={} manager={} clTimer={}", + $clName, $params.getPolicyName() + "." + drools.getRule().getName(), + $event, $manager, $clTimer); + + try { + // + // Check which event this is. + // + ControlLoopEventManager.NewEventStatus eventStatus = $manager.onNewEvent($event); + // + // Check what kind of event this is + // + if (eventStatus == NewEventStatus.SUBSEQUENT_ONSET) { + // + // We don't care about subsequent onsets + // + logger.info("{}: {}: subsequent onset", + $clName, $params.getPolicyName() + "." + drools.getRule().getName()); + retract($event); + return; + } + if (eventStatus == NewEventStatus.SYNTAX_ERROR) { + // + // Ignore any bad syntax events + // + logger.warn("{}: {}: syntax error", + $clName, $params.getPolicyName() + "." + drools.getRule().getName()); + retract($event); + return; + } + // + // We only want the initial ONSET event in memory, + // all the other events need to be retracted to support + // cleanup and avoid the other rules being fired for this event. + // + if (eventStatus != NewEventStatus.FIRST_ONSET) { + logger.warn("{}: {}: no first onset", + $clName, $params.getPolicyName() + "." + drools.getRule().getName()); + retract($event); + } + + logger.debug("{}: {}: target={}", $clName, + $params.getPolicyName() + "." + drools.getRule().getName(), $event.getTarget()); + // + // Now start seeing if we need to process this event + // + + // + // Check if this is a Final Event + // + VirtualControlLoopNotification notification = $manager.isControlLoopFinal(); + + + if (notification != null) { + // + // Its final, but are we waiting for abatement? + // + if ($manager.getNumAbatements() > 0) { + logger.info("{}: {}: abatement received for {}. Closing the control loop", + $clName, $params.getPolicyName() + "." + drools.getRule().getName(), + $event.getRequestId()); + notification.setFrom("policy"); + notification.setPolicyName($params.getPolicyName() + "." + drools.getRule().getName()); + notification.setPolicyScope($params.getPolicyScope()); + notification.setPolicyVersion($params.getPolicyVersion()); + // + // In this case, we are done + // + PolicyEngineConstants.getManager().deliver("POLICY-CL-MGT", notification); + // + // Unlock the target + // + TargetLock lock = $manager.unlockCurrentOperation(); + if (lock != null) { + logger.debug("{}: {}: retracting lock=", $clName, + $params.getPolicyName() + "." + drools.getRule().getName(), lock); + retract(lock); + } + // + // Retract everything from memory + // + logger.info("{}: {}: retracting onset, manager, and timer", + $clName, $params.getPolicyName() + "." + drools.getRule().getName()); + + retract($manager.getOnsetEvent()); + + // don't retract manager, etc. - a clean-up rule will do that + + // + // TODO - what if we get subsequent Events for this RequestId? + // By default, it will all start over again. May be confusing for Ruby. + // Or, we could track this and then subsequently ignore the events + // + } else { + // + // Check whether we need to wait for abatement + // + if ($manager.getProcessor().getControlLoop().getAbatement() == true && notification.getNotification() == ControlLoopNotificationType.FINAL_SUCCESS) { + logger.info("{}: {}: waiting for abatement ..", + $clName, $params.getPolicyName() + "." + drools.getRule().getName()); + } else { + logger.info("{}: {}: no abatement expect for {}. Closing the control loop", + $clName, $params.getPolicyName() + "." + drools.getRule().getName(), + $event.getRequestId()); + + notification.setFrom("policy"); + notification.setPolicyName($params.getPolicyName() + "." + drools.getRule().getName()); + notification.setPolicyScope($params.getPolicyScope()); + notification.setPolicyVersion($params.getPolicyVersion()); + + // + // In this case, we are done + // + PolicyEngineConstants.getManager().deliver("POLICY-CL-MGT", notification); + // + // Unlock the target + // + TargetLock lock = $manager.unlockCurrentOperation(); + if (lock != null) { + logger.debug("{}: {}: retracting lock=", $clName, + $params.getPolicyName() + "." + drools.getRule().getName(), lock); + retract(lock); + } + // + // Retract everything from memory + // + logger.info("{}: {}: retracting onset, manager, and timer", + $clName, $params.getPolicyName() + "." + drools.getRule().getName()); + + retract($manager.getOnsetEvent()); + + // don't retract manager, etc. - a clean-up rule will do that + } + } + } else { + // + // NOT final, so let's ask for the next operation + // + ControlLoopOperationManager operation = $manager.processControlLoop(); + if (operation != null) { + // + // Let's ask for a lock right away + // + LockResult result = $manager.lockCurrentOperation(); + logger.info("{}: {}: guard lock acquired={}", + $clName, $params.getPolicyName() + "." + drools.getRule().getName(), + result.getB()); + if (result.getA().equals(GuardResult.LOCK_ACQUIRED)) { + // + // insert the operation into memory + // + insert(operation); + + // + // insert operation timeout object + // + ControlLoopTimer opTimer = new ControlLoopTimer(); + opTimer.setTimerType("Operation"); + opTimer.setClosedLoopControlName($event.getClosedLoopControlName()); + opTimer.setRequestId($event.getRequestId().toString()); + Integer timeout = operation.getOperationTimeout(); + opTimer.setDelay(timeout > 0 ? timeout.toString() + "s" : $clTimer.getDelay()); + insert(opTimer); + + // + // Insert lock into memory + // + insert(result.getB()); + } + else { + logger.debug("The target resource {} is already processing", + $event.getAai().get($event.getTarget())); + notification = new VirtualControlLoopNotification($event); + notification.setNotification(ControlLoopNotificationType.REJECTED); + notification.setMessage("The target " + $event.getAai().get($event.getTarget()) + + " is already locked"); + notification.setFrom("policy"); + notification.setPolicyName($params.getPolicyName() + "." + drools.getRule().getName()); + notification.setPolicyScope($params.getPolicyScope()); + notification.setPolicyVersion($params.getPolicyVersion()); + + PolicyEngineConstants.getManager().deliver("POLICY-CL-MGT", notification); + + retract($event); + + // don't retract manager, etc. - a clean-up rule will do that + + if(result.getB() != null) { + retract(result.getB()); + } + } + logger.info("{}: {}: starting operation={}", + $clName, $params.getPolicyName() + "." + drools.getRule().getName(), + operation); + } else { + // + // Probably waiting for abatement + // + logger.info("{}: {}: no operation, probably waiting for abatement", + $clName, $params.getPolicyName() + "." + drools.getRule().getName()); + } + } + } catch (Exception e) { + logger.warn("{}: {}: unexpected", + $clName, + $params.getPolicyName() + "." + drools.getRule().getName(), e); + + VirtualControlLoopNotification notification = new VirtualControlLoopNotification($event); + notification.setNotification(ControlLoopNotificationType.FINAL_FAILURE); + notification.setMessage(e.getMessage()); + notification.setFrom("policy"); + notification.setPolicyName($params.getPolicyName() + "." + drools.getRule().getName()); + notification.setPolicyScope($params.getPolicyScope()); + notification.setPolicyVersion($params.getPolicyVersion()); + + PolicyEngineConstants.getManager().deliver("POLICY-CL-MGT", notification); + + retract($event); + + // don't retract manager, etc. - a clean-up rule will do that + } + +end + +/* +* +* Guard Permitted, let's send request to the actor. +* +*/ +rule "EVENT.MANAGER.OPERATION.LOCKED.GUARD_PERMITTED" + when + $params : ControlLoopParams( $clName : getClosedLoopControlName() ) + $event : VirtualControlLoopEvent( closedLoopControlName == $clName ) + $manager : ControlLoopEventManager( closedLoopControlName == $event.getClosedLoopControlName(), + requestId == $event.getRequestId() ) + $operation : ControlLoopOperationManager( onset.closedLoopControlName == $event.getClosedLoopControlName(), + onset.getRequestId() == $event.getRequestId(), "Permit".equalsIgnoreCase(getGuardApprovalStatus()) ) + $lock : TargetLock (requestId == $event.getRequestId()) + $opTimer : ControlLoopTimer( closedLoopControlName == $event.getClosedLoopControlName(), + requestId == $event.getRequestId().toString(), timerType == "Operation", !expired ) + then + + Logger logger = LoggerFactory.getLogger(drools.getRule().getPackage()); + logger.info("{}: {}: event={} manager={} operation={} lock={}", + $clName, $params.getPolicyName() + "." + drools.getRule().getName(), + $event, $manager, $operation, $lock); + + Object request = null; + boolean caughtException = false; + + try { + request = $operation.startOperation($event); + + if (request != null) { + logger.debug("{}: {}: starting operation ..", + $clName, + $params.getPolicyName() + "." + drools.getRule().getName()); + // + // Tell interested parties we are performing this Operation + // + VirtualControlLoopNotification notification = new VirtualControlLoopNotification($event); + notification.setNotification(ControlLoopNotificationType.OPERATION); + notification.setMessage($operation.getOperationMessage()); + notification.setHistory($operation.getHistory()); + notification.setFrom("policy"); + notification.setPolicyName($params.getPolicyName() + "." + drools.getRule().getName()); + notification.setPolicyScope($params.getPolicyScope()); + notification.setPolicyVersion($params.getPolicyVersion()); + + PolicyEngineConstants.getManager().deliver("POLICY-CL-MGT", notification); + + switch ($operation.policy.getActor()){ + + case "APPC": + + if (request instanceof Request) { + PolicyEngineConstants.getManager().deliver("APPC-CL", request); + } + else if (request instanceof LcmRequestWrapper) { + PolicyEngineConstants.getManager().deliver("APPC-LCM-READ", request); + } + break; + case "SO": + // at this point the AAI named query request should have already been made, the response + // recieved and used in the construction of the SO Request which is stored in operationRequest + + if(request instanceof SoRequest) { + // Call SO. The response will be inserted into memory once it's received + class mySoCallback implements SoManager.SoCallback { + public void onSoResponseWrapper(SoResponseWrapper wrapper) { + drools.getWorkingMemory().insert(wrapper); + } + } + SoActorServiceProvider.sendRequest($event.getRequestId().toString(), + new mySoCallback(), + request, + PolicyEngineConstants.getManager().getEnvironmentProperty("so.url"), + PolicyEngineConstants.getManager().getEnvironmentProperty("so.username"), + PolicyEngineConstants.getManager().getEnvironmentProperty("so.password")); + } + break; + case "VFC": + if (request instanceof VfcRequest) { + class myVfcCallback implements VfcManager.VfcCallback { + + public void onResponse(VfcResponse responseError) { + drools.getWorkingMemory().insert(responseError); + } + }; + // Start VFC thread + Thread t = new Thread(new VfcManager(new myVfcCallback(), + (VfcRequest)request, + PolicyEngineConstants.getManager().getEnvironmentProperty("vfc.url"), + PolicyEngineConstants.getManager().getEnvironmentProperty("vfc.username"), + PolicyEngineConstants.getManager().getEnvironmentProperty("vfc.password"))); + t.start(); + } + break; + case "SDNR": + if (request instanceof PciRequestWrapper) { + PolicyEngineConstants.getManager().deliver("SDNR-CL", request); + } + break; + + case "SDNC": + if (request instanceof SdncRequest) { + class mySdncCallback implements SdncManager.SdncCallback { + public void onCallback(SdncResponse response) { + drools.getWorkingMemory().insert(response); + } + } + // Start SDNC thread + Thread t = new Thread(new SdncManager(new mySdncCallback(), + (SdncRequest)request, + PolicyEngineConstants.getManager().getEnvironmentProperty("sdnc.url"), + PolicyEngineConstants.getManager().getEnvironmentProperty("sdnc.username"), + PolicyEngineConstants.getManager().getEnvironmentProperty("sdnc.password"))); + t.start(); + } + break; + } + } else { + // + // What happens if its null? + // + logger.warn("{}: {}: unexpected null operation request", + $clName, + $params.getPolicyName() + "." + drools.getRule().getName()); + if ("SO".equals($operation.policy.getActor())) { + retract($opTimer); + retract($operation); + modify($manager) {finishOperation($operation)}; + } + else if ("vfc".equalsIgnoreCase($operation.policy.getActor())) { + retract($opTimer); + retract($operation); + modify($manager) {finishOperation($operation)}; + } + else if ("sdnc".equalsIgnoreCase($operation.policy.getActor())) { + retract($opTimer); + retract($operation); + modify($manager) {finishOperation($operation)}; + } + } + + } catch (Exception e) { + String msg = e.getMessage(); + logger.warn("{}: {}: operation={}: AAI failure: {}", + $clName, + $params.getPolicyName() + "." + drools.getRule().getName(), + $operation, msg, e); + $operation.setOperationHasException(msg); + + if(request != null) { + // + // Create a notification for it ("DB Write - end operation") + // + VirtualControlLoopNotification notification = new VirtualControlLoopNotification($event); + notification.setFrom("policy"); + notification.setPolicyName($params.getPolicyName() + "." + drools.getRule().getName()); + notification.setPolicyScope($params.getPolicyScope()); + notification.setPolicyVersion($params.getPolicyVersion()); + notification.setNotification(ControlLoopNotificationType.OPERATION_FAILURE); + notification.setMessage($operation.getOperationHistory()); + notification.setHistory($operation.getHistory()); + + PolicyEngineConstants.getManager().deliver("POLICY-CL-MGT", notification); + } + + retract($opTimer); + retract($operation); + caughtException = true; + } + + // Having the modify statement in the catch clause doesn't work for whatever reason + if (caughtException) { + modify($manager) {finishOperation($operation)}; + } +end + + +/* +* +* We were able to acquire a lock so now let's ask Xacml Guard whether +* we are allowed to proceed with the request to the actor. +* +*/ +rule "EVENT.MANAGER.OPERATION.LOCKED.GUARD_NOT_YET_QUERIED" + when + $params : ControlLoopParams( $clName : getClosedLoopControlName() ) + $event : VirtualControlLoopEvent( closedLoopControlName == $clName ) + $manager : ControlLoopEventManager( closedLoopControlName == $event.getClosedLoopControlName(), + requestId == $event.getRequestId() ) + $operation : ControlLoopOperationManager( onset.closedLoopControlName == $event.getClosedLoopControlName(), + onset.getRequestId() == $event.getRequestId(), getGuardApprovalStatus() == "NONE" ) + $lock : TargetLock (requestId == $event.getRequestId()) + then + + Logger logger = LoggerFactory.getLogger(drools.getRule().getPackage()); + logger.info("{}: {}: event={} manager={} operation={} lock={}", + $clName, $params.getPolicyName() + "." + drools.getRule().getName(), + $event, $manager, $operation, $lock); + + // + // Sending notification that we are about to query Guard ("DB write - start operation") + // + VirtualControlLoopNotification notification = new VirtualControlLoopNotification($event); + notification.setNotification(ControlLoopNotificationType.OPERATION); + notification.setMessage("Sending guard query for " + $operation.policy.getActor() + " " + + $operation.policy.getRecipe()); + notification.setHistory($operation.getHistory()); + notification.setFrom("policy"); + notification.setPolicyName($params.getPolicyName() + "." + drools.getRule().getName()); + notification.setPolicyScope($params.getPolicyScope()); + notification.setPolicyVersion($params.getPolicyVersion()); + + PolicyEngineConstants.getManager().deliver("POLICY-CL-MGT", notification); + + // + // Now send Guard Request to XACML Guard. In order to bypass the call to Guard, + // just change guardEnabled to false. + // + // In order to use REST XACML, provide a URL instead of "" as a second argument + // to the CallGuardTask() and set the first argument to null + // (instead of XacmlPdpEngine). + // + + // NOTE: The environment properties uses "guard.disabled" but the boolean is guardEnabled + boolean guardEnabled = "false".equalsIgnoreCase(PolicyEngineConstants.getManager().getEnvironmentProperty("guard.disabled")); + + if(guardEnabled){ + + Thread t = new Thread(new org.onap.policy.guard.CallGuardTask( + drools.getWorkingMemory(), + $event.getClosedLoopControlName(), + $operation.policy.getActor().toString(), + $operation.policy.getRecipe(), + $operation.getTargetEntity(), + $event.getRequestId().toString(), + () -> { + AaiNqResponseWrapper resp = $manager.getNqVserverFromAai(); + return(resp == null ? null : resp.countVfModules()); + })); + t.start(); + } + else{ + insert(new PolicyGuardResponse("Permit", $event.getRequestId(), $operation.policy.getRecipe())); + } + +end + +// +// This rule will be triggered when a thread talking to the XACML Guard inserts a +// guardResponse object into the working memory +// +rule "GUARD.RESPONSE" + when + $params : ControlLoopParams( $clName : getClosedLoopControlName() ) + $event : VirtualControlLoopEvent( closedLoopControlName == $clName, + closedLoopEventStatus == ControlLoopEventStatus.ONSET ) + $manager : ControlLoopEventManager( closedLoopControlName == $event.getClosedLoopControlName(), + requestId == $event.getRequestId() ) + $operation : ControlLoopOperationManager( onset.closedLoopControlName == $event.getClosedLoopControlName(), + onset.getRequestId() == $event.getRequestId() ) + $lock : TargetLock (requestId == $event.getRequestId()) + $opTimer : ControlLoopTimer( closedLoopControlName == $event.getClosedLoopControlName(), + requestId == $event.getRequestId().toString(), timerType == "Operation", !expired ) + $guardResponse : PolicyGuardResponse(requestId == $event.getRequestId(), $operation.policy.recipe == operation) + then + + Logger logger = LoggerFactory.getLogger(drools.getRule().getPackage()); + logger.info("{}: {}: event={} manager={} operation={} lock={} opTimer={} guardResponse={}", + $clName, $params.getPolicyName() + "." + drools.getRule().getName(), + $event, $manager, $operation, $lock, $opTimer, $guardResponse); + + + //we will permit the operation if there was no Guard for it + if("Indeterminate".equalsIgnoreCase($guardResponse.getResult())){ + $guardResponse.setResult("Permit"); + } + + // + // This notification has Guard result in "message". ("DB write - end operation in case of Guard Deny") + // + VirtualControlLoopNotification notification = new VirtualControlLoopNotification($event); + notification.setNotification(ControlLoopNotificationType.OPERATION); + notification.setMessage("Guard result for " + $operation.policy.getActor() + " " + $operation.policy.getRecipe() + + " is " + $guardResponse.getResult()); + notification.setHistory($operation.getHistory()); + notification.setFrom("policy"); + notification.setPolicyName($params.getPolicyName() + "." + drools.getRule().getName()); + notification.setPolicyScope($params.getPolicyScope()); + notification.setPolicyVersion($params.getPolicyVersion()); + + PolicyEngineConstants.getManager().deliver("POLICY-CL-MGT", notification); + + if("Permit".equalsIgnoreCase($guardResponse.getResult())){ + + modify($operation){setGuardApprovalStatus($guardResponse.getResult())}; + } + else { + //This is the Deny case + $operation.startOperation($event); + $operation.setOperationHasGuardDeny(); + retract($opTimer); + retract($operation); + modify($manager) {finishOperation($operation)}; + } + + retract($guardResponse); + +end + +/* +* +* This rule responds to APPC Response Events +* +* I would have like to be consistent and write the Response like this: +* $response : Response( CommonHeader.RequestId == $onset.getRequestId() ) +* +* However, no compile error was given. But a runtime error was given. I think +* because drools is confused between the classname CommonHeader vs the property CommonHeader. +* +*/ +rule "APPC.RESPONSE" + when + $params : ControlLoopParams( $clName : getClosedLoopControlName() ) + $event : VirtualControlLoopEvent( closedLoopControlName == $clName, + closedLoopEventStatus == ControlLoopEventStatus.ONSET ) + $manager : ControlLoopEventManager( closedLoopControlName == $event.getClosedLoopControlName(), + requestId == $event.getRequestId() ) + $operation : ControlLoopOperationManager( onset.closedLoopControlName == $event.getClosedLoopControlName(), + onset.getRequestId() == $event.getRequestId() ) + $opTimer : ControlLoopTimer( closedLoopControlName == $event.getClosedLoopControlName(), + requestId == $event.getRequestId().toString(), timerType == "Operation", !expired ) + $lock : TargetLock (requestId == $event.getRequestId()) + $response : Response( getCommonHeader().RequestId == $event.getRequestId() ) + then + + Logger logger = LoggerFactory.getLogger(drools.getRule().getPackage()); + logger.info("{}: {}", $clName, $params.getPolicyName() + "." + drools.getRule().getName()); + logger.debug("{}: {}: event={} manager={} operation={} lock={} opTimer={} response={}", + $clName, $params.getPolicyName() + "." + drools.getRule().getName(), + $event, $manager, $operation, $lock, $opTimer, $response); + // + // Get the result of the operation + // + PolicyResult policyResult = $operation.onResponse($response); + if (policyResult != null) { + logger.debug("{}: {}: operation finished - result={}", + $clName, $params.getPolicyName() + "." + drools.getRule().getName(), + policyResult); + // + // This Operation has completed, construct a notification showing our results. (DB write - end operation) + // + VirtualControlLoopNotification notification = new VirtualControlLoopNotification($event); + notification.setFrom("policy"); + notification.setPolicyName($params.getPolicyName() + "." + drools.getRule().getName()); + notification.setPolicyScope($params.getPolicyScope()); + notification.setPolicyVersion($params.getPolicyVersion()); + notification.setMessage($operation.getOperationHistory()); + notification.setHistory($operation.getHistory()); + if (policyResult.equals(PolicyResult.SUCCESS)) { + notification.setNotification(ControlLoopNotificationType.OPERATION_SUCCESS); + // + // Let interested parties know + // + PolicyEngineConstants.getManager().deliver("POLICY-CL-MGT", notification); + } else { + notification.setNotification(ControlLoopNotificationType.OPERATION_FAILURE); + // + // Let interested parties know + // + PolicyEngineConstants.getManager().deliver("POLICY-CL-MGT", notification); + } + // + // Ensure the operation is complete + // + if ($operation.isOperationComplete() == true) { + // + // It is complete, remove it from memory + // + retract($operation); + // + // We must also retract the timer object + // NOTE: We could write a Rule to do this + // + retract($opTimer); + // + // Complete the operation + // + modify($manager) {finishOperation($operation)}; + } else { + // + // Just doing this will kick off the LOCKED rule again + // + modify($operation) {}; + } + } else { + // + // Its not finished yet (i.e. expecting more Response objects) + // + // Or possibly it is a leftover response that we timed the request out previously + // + } + // + // We are going to retract these objects from memory + // + retract($response); +end + +/* +* +* The problem with Responses is that they don't have a controlLoopControlName +* field in them, so the only way to attach them is via RequestId. If we have multiple +* control loop .drl's loaded in the same container, we need to be sure the cleanup +* rules don't remove Responses for other control loops. +* +*/ +rule "APPC.RESPONSE.CLEANUP" + when + $params : ControlLoopParams( $clName : getClosedLoopControlName() ) + $response : Response($id : getCommonHeader().RequestId ) + not ( VirtualControlLoopEvent( requestId == $id, closedLoopEventStatus == ControlLoopEventStatus.ONSET ) ) + then + + Logger logger = LoggerFactory.getLogger(drools.getRule().getPackage()); + logger.info("{}: {}", $clName, $params.getPolicyName() + "." + drools.getRule().getName()); + logger.debug("{}: {}: orphan appc response={}", + $clName, $params.getPolicyName() + "." + drools.getRule().getName(), $id); + + // + // Retract it + // + retract($response); +end + +/* +* +* This rule responds to APPC Response Events using the new LCM interface provided by appc +* +*/ +rule "APPC.LCM.RESPONSE" + when + $params : ControlLoopParams( $clName : getClosedLoopControlName() ) + $event : VirtualControlLoopEvent( closedLoopControlName == $clName, + closedLoopEventStatus == ControlLoopEventStatus.ONSET ) + $manager : ControlLoopEventManager( closedLoopControlName == $event.getClosedLoopControlName(), + requestId == $event.getRequestId() ) + $operation : ControlLoopOperationManager( onset.closedLoopControlName == $event.getClosedLoopControlName(), + onset.getRequestId() == $event.getRequestId() ) + $opTimer : ControlLoopTimer( closedLoopControlName == $event.getClosedLoopControlName(), + requestId == $event.getRequestId().toString(), timerType == "Operation", !expired ) + $lock : TargetLock (requestId == $event.getRequestId()) + $response : LcmResponseWrapper( getBody().getCommonHeader().getRequestId() == $event.getRequestId() ) + then + + Logger logger = LoggerFactory.getLogger(drools.getRule().getPackage()); + logger.info("{}: {}", $clName, $params.getPolicyName() + "." + drools.getRule().getName()); + logger.debug("{}: {}: event={} manager={} operation={} lock={} opTimer={} response={}", + $clName, $params.getPolicyName() + "." + drools.getRule().getName(), + $event, $manager, $operation, $lock, $operation, $opTimer, $response); + + // + // Get the result of the operation + // + PolicyResult policyResult = $operation.onResponse($response); + if (policyResult != null) { + logger.debug("{}: {}: operation finished - result={}", + $clName, $params.getPolicyName() + "." + drools.getRule().getName(), + policyResult); + + // + // This Operation has completed, construct a notification showing our results. (DB write - end operation) + // + VirtualControlLoopNotification notification = new VirtualControlLoopNotification($event); + notification.setFrom("policy"); + notification.setPolicyName($params.getPolicyName() + "." + drools.getRule().getName()); + notification.setPolicyScope($params.getPolicyScope()); + notification.setPolicyVersion($params.getPolicyVersion()); + notification.setMessage($operation.getOperationHistory()); + notification.setHistory($operation.getHistory()); + if (policyResult.equals(PolicyResult.SUCCESS)) { + notification.setNotification(ControlLoopNotificationType.OPERATION_SUCCESS); + } else { + notification.setNotification(ControlLoopNotificationType.OPERATION_FAILURE); + } + PolicyEngineConstants.getManager().deliver("POLICY-CL-MGT", notification); + // + // Ensure the operation is complete + // + if ($operation.isOperationComplete() == true) { + // + // It is complete, remove it from memory + // + retract($operation); + // + // We must also retract the timer object + // NOTE: We could write a Rule to do this + // + retract($opTimer); + // + // Complete the operation + // + modify($manager) {finishOperation($operation)}; + } else { + // + // Just doing this will kick off the LOCKED rule again + // + modify($operation) {}; + } + } else { + // + // Its not finished yet (i.e. expecting more Response objects) + // + // Or possibly it is a leftover response that we timed the request out previously + // + } + // + // We are going to retract these objects from memory + // + retract($response); +end + +/* +* +* Clean Up any lingering LCM reponses +* +*/ +rule "APPC.LCM.RESPONSE.CLEANUP" + when + $params : ControlLoopParams( $clName : getClosedLoopControlName() ) + $response : LcmResponseWrapper($id : getBody().getCommonHeader().getRequestId ) + not ( VirtualControlLoopEvent( requestId == $id, closedLoopEventStatus == ControlLoopEventStatus.ONSET ) ) + then + + Logger logger = LoggerFactory.getLogger(drools.getRule().getPackage()); + logger.info("{}: {}", $clName, $params.getPolicyName() + "." + drools.getRule().getName()); + logger.debug("{}: {}: orphan appc response={}", + $clName, $params.getPolicyName() + "." + drools.getRule().getName(), $id); + // + // Retract it + // + retract($response); +end + +/* +* +* This rule responds to SO Response Events +* +*/ +rule "SO.RESPONSE" + when + $params : ControlLoopParams( $clName : getClosedLoopControlName() ) + $event : VirtualControlLoopEvent( closedLoopControlName == $clName, + closedLoopEventStatus == ControlLoopEventStatus.ONSET ) + $manager : ControlLoopEventManager( closedLoopControlName == $event.getClosedLoopControlName(), + requestId == $event.getRequestId() ) + $operation : ControlLoopOperationManager( onset.closedLoopControlName == $event.getClosedLoopControlName(), + onset.getRequestId() == $event.getRequestId() ) + $opTimer : ControlLoopTimer( closedLoopControlName == $event.getClosedLoopControlName(), + requestId == $event.getRequestId().toString(), timerType == "Operation", !expired ) + $lock : TargetLock (requestId == $event.getRequestId()) + $response : SoResponseWrapper(requestId.toString() == $event.getRequestId().toString() ) + then + + Logger logger = LoggerFactory.getLogger(drools.getRule().getPackage()); + logger.info("{}: {}", $clName, $params.getPolicyName() + "." + drools.getRule().getName()); + logger.debug("{}: {}: event={} manager={} operation={} lock={} opTimer={} response={}", + $clName, $params.getPolicyName() + "." + drools.getRule().getName(), + $event, $manager, $operation, $lock, $operation, $opTimer, $response); + + // Get the result of the operation + // + PolicyResult policyResult = $operation.onResponse($response); + if (policyResult != null) { + logger.debug("{}: {}: operation finished - result={}", + $clName, $params.getPolicyName() + "." + drools.getRule().getName(), + policyResult); + + // + // This Operation has completed, construct a notification showing our results + // + VirtualControlLoopNotification notification = new VirtualControlLoopNotification($event); + notification.setFrom("policy"); + notification.setPolicyName($params.getPolicyName() + "." + drools.getRule().getName()); + notification.setPolicyScope($params.getPolicyScope()); + notification.setPolicyVersion($params.getPolicyVersion()); + notification.setMessage($operation.getOperationHistory()); + notification.setHistory($operation.getHistory()); + if (policyResult.equals(PolicyResult.SUCCESS)) { + notification.setNotification(ControlLoopNotificationType.OPERATION_SUCCESS); + } else { + notification.setNotification(ControlLoopNotificationType.OPERATION_FAILURE); + + } + PolicyEngineConstants.getManager().deliver("POLICY-CL-MGT", notification); + // + // Ensure the operation is complete + // + if ($operation.isOperationComplete() == true) { + // + // It is complete, remove it from memory + // + retract($operation); + // + // We must also retract the timer object + // NOTE: We could write a Rule to do this + // + retract($opTimer); + // + // Complete the operation + // + modify($manager) {finishOperation($operation)}; + } else { + // + // Just doing this will kick off the LOCKED rule again + // + modify($operation) {}; + } + } else { + // + // Its not finished yet (i.e. expecting more Response objects) + // + // Or possibly it is a leftover response that we timed the request out previously + // + } + // + // We are going to retract these objects from memory + // + retract($response); + +end + +/* +* +* This rule responds to VFC Response Events +* +*/ +rule "VFC.RESPONSE" + when + $params : ControlLoopParams( $clName : getClosedLoopControlName() ) + $event : VirtualControlLoopEvent( closedLoopControlName == $clName, + closedLoopEventStatus == ControlLoopEventStatus.ONSET ) + $manager : ControlLoopEventManager( closedLoopControlName == $event.getClosedLoopControlName(), + requestId == $event.getRequestId() ) + $operation : ControlLoopOperationManager( onset.closedLoopControlName == $event.getClosedLoopControlName(), + onset.getRequestId() == $event.getRequestId() ) + $opTimer : ControlLoopTimer( closedLoopControlName == $event.getClosedLoopControlName(), + requestId == $event.getRequestId().toString(), timerType == "Operation", !expired ) + $lock : TargetLock (requestId == $event.getRequestId()) + $response : VfcResponse( requestId.toString() == $event.getRequestId().toString() ) + then + Logger logger = LoggerFactory.getLogger(drools.getRule().getPackage()); + logger.info("{}: {}", $clName, $params.getPolicyName() + "." + drools.getRule().getName()); + logger.debug("{}: {}: event={} manager={} operation={} lock={} opTimer={} response={}", + $clName, $params.getPolicyName() + "." + drools.getRule().getName(), + $event, $manager, $operation, $lock, $operation, $opTimer, $response); + + // Get the result of the operation + // + PolicyResult policyResult = $operation.onResponse($response); + if (policyResult != null) { + // + // This Operation has completed, construct a notification showing our results + // + VirtualControlLoopNotification notification = new VirtualControlLoopNotification($event); + notification.setFrom("policy"); + notification.setPolicyName($params.getPolicyName() + "." + drools.getRule().getName()); + notification.setPolicyScope($params.getPolicyScope()); + notification.setPolicyVersion($params.getPolicyVersion()); + notification.setMessage($operation.getOperationHistory()); + notification.setHistory($operation.getHistory()); + // + // Ensure the operation is complete + // + if ($operation.isOperationComplete() == true) { + // + // It is complete, remove it from memory + // + retract($operation); + // + // We must also retract the timer object + // NOTE: We could write a Rule to do this + // + retract($opTimer); + // + // Complete the operation + // + modify($manager) {finishOperation($operation)}; + } else { + // + // Just doing this will kick off the LOCKED rule again + // + modify($operation) {}; + } + } else { + // + // Its not finished yet (i.e. expecting more Response objects) + // + // Or possibly it is a leftover response that we timed the request out previously + // + } + // + // We are going to retract these objects from memory + // + retract($response); + +end + +/* +* +* This rule responds to SDNC Response Events +* +*/ +rule "SDNC.RESPONSE" + when + $params : ControlLoopParams( $clName : getClosedLoopControlName() ) + $event : VirtualControlLoopEvent( closedLoopControlName == $clName, closedLoopEventStatus == ControlLoopEventStatus.ONSET ) + $manager : ControlLoopEventManager( closedLoopControlName == $event.getClosedLoopControlName(), requestId == $event.getRequestId() ) + $operation : ControlLoopOperationManager( onset.closedLoopControlName == $event.getClosedLoopControlName(), onset.getRequestId() == $event.getRequestId() ) + $opTimer : ControlLoopTimer( closedLoopControlName == $event.getClosedLoopControlName(), + requestId == $event.getRequestId().toString(), timerType == "Operation", !expired ) + $lock : TargetLock (requestId == $event.getRequestId()) + $response : SdncResponse( requestId.toString() == $event.getRequestId().toString() ) + then + Logger logger = LoggerFactory.getLogger(drools.getRule().getPackage()); + logger.info("{}: {}", $clName, $params.getPolicyName() + "." + drools.getRule().getName()); + logger.debug("{}: {}: event={} manager={} operation={} lock={} opTimer={} response={}", + $clName, $params.getPolicyName() + "." + drools.getRule().getName(), + $event, $manager, $operation, $lock, $operation, $opTimer, $response); + + // Get the result of the operation + // + PolicyResult policyResult = $operation.onResponse($response); + if (policyResult != null) { + // + // This Operation has completed, construct a notification showing our results + // + VirtualControlLoopNotification notification = new VirtualControlLoopNotification($event); + notification.setFrom("policy"); + notification.setPolicyName($params.getPolicyName() + "." + drools.getRule().getName()); + notification.setPolicyScope($params.getPolicyScope()); + notification.setPolicyVersion($params.getPolicyVersion()); + notification.setMessage($operation.getOperationHistory()); + notification.setHistory($operation.getHistory()); + // + // Ensure the operation is complete + // + if ($operation.isOperationComplete()) { + // + // It is complete, remove it from memory + // + retract($operation); + // + // We must also retract the timer object + // NOTE: We could write a Rule to do this + // + retract($opTimer); + // + // Complete the operation + // + modify($manager) {finishOperation($operation)}; + } else { + // + // Just doing this will kick off the LOCKED rule again + // + modify($operation) {}; + } + } else { + // + // Its not finished yet (i.e. expecting more Response objects) + // + // Or possibly it is a leftover response that we timed the request out previously + // + } + // + // We are going to retract these objects from memory + // + retract($response); + +end + +/* +* +* This manages a single timer. +* Due to a bug in the drools code, the drools timer needed to be split from most of the objects in the when clause +* +*/ +rule "TIMER.FIRED" + timer (expr: $timeout) + when + $timer : ControlLoopTimer($timeout : delay, !expired) + then + Logger logger = LoggerFactory.getLogger(drools.getRule().getPackage()); + logger.info("This is TIMER.FIRED"); + modify($timer){setExpired(true)}; + end + +/* +* +* This is the timer that manages the timeout for an individual operation. +* +*/ +rule "EVENT.MANAGER.OPERATION.TIMEOUT" + when + $params : ControlLoopParams( $clName : getClosedLoopControlName() ) + $event : VirtualControlLoopEvent( closedLoopControlName == $clName ) + $manager : ControlLoopEventManager( closedLoopControlName == $event.getClosedLoopControlName(), + requestId == $event.getRequestId() ) + $operation : ControlLoopOperationManager( onset.closedLoopControlName == $event.getClosedLoopControlName(), + onset.getRequestId() == $event.getRequestId() ) + $opTimer : ControlLoopTimer( closedLoopControlName == $event.getClosedLoopControlName(), + requestId == $event.getRequestId().toString(), timerType == "Operation", expired ) + $lock : TargetLock (requestId == $event.getRequestId()) + then + + Logger logger = LoggerFactory.getLogger(drools.getRule().getPackage()); + logger.info("{}: {}", $clName, $params.getPolicyName() + "." + drools.getRule().getName()); + logger.debug("{}: {}: event={} manager={} operation={} lock={} opTimer={}", + $clName, $params.getPolicyName() + "." + drools.getRule().getName(), + $event, $manager, $operation, $lock, $operation, $opTimer); + + // + // Tell it its timed out + // + $operation.setOperationHasTimedOut(); + // + // Create a notification for it ("DB Write - end operation") + // + VirtualControlLoopNotification notification = new VirtualControlLoopNotification($event); + notification.setFrom("policy"); + notification.setPolicyName($params.getPolicyName() + "." + drools.getRule().getName()); + notification.setPolicyScope($params.getPolicyScope()); + notification.setPolicyVersion($params.getPolicyVersion()); + notification.setNotification(ControlLoopNotificationType.OPERATION_FAILURE); + notification.setMessage($operation.getOperationHistory()); + notification.setHistory($operation.getHistory()); + // + // Let interested parties know + // + PolicyEngineConstants.getManager().deliver("POLICY-CL-MGT", notification); + // + // Get rid of the timer + // + retract($opTimer); + // + // Ensure the operation is complete + // + if ($operation.isOperationComplete() == true) { + // + // It is complete, remove it from memory + // + retract($operation); + // + // Complete the operation + // + modify($manager) {finishOperation($operation)}; + } else { + // + // Just doing this will kick off the LOCKED rule again + // + modify($operation) {}; + } +end + +/* +* +* This is the timer that manages the overall control loop timeout. +* +*/ +rule "EVENT.MANAGER.TIMEOUT" + when + $params : ControlLoopParams( $clName : getClosedLoopControlName() ) + $event : VirtualControlLoopEvent( closedLoopControlName == $clName ) + $manager : ControlLoopEventManager( closedLoopControlName == $event.getClosedLoopControlName(), + requestId == $event.getRequestId() ) + $clTimer : ControlLoopTimer( closedLoopControlName == $event.getClosedLoopControlName(), + requestId == $event.getRequestId().toString(), timerType == "ClosedLoop", expired ) + then + + Logger logger = LoggerFactory.getLogger(drools.getRule().getPackage()); + logger.info("{}: {}", $clName, $params.getPolicyName() + "." + drools.getRule().getName()); + + logger.debug("{}: {}: event={}", + $clName, $params.getPolicyName() + "." + drools.getRule().getName(), + $event); + // + // Tell the Event Manager it has timed out + // + VirtualControlLoopNotification notification = $manager.setControlLoopTimedOut(); + if (notification != null) { + notification.setFrom("policy"); + notification.setPolicyName($params.getPolicyName() + "." + drools.getRule().getName()); + notification.setPolicyScope($params.getPolicyScope()); + notification.setPolicyVersion($params.getPolicyVersion()); + // + // Let interested parties know + // + PolicyEngineConstants.getManager().deliver("POLICY-CL-MGT", notification); + } + // + // Retract the event + // + retract($event); +end + +/* +* +* This rule cleans up the manager and other objects after an event has +* been retracted. +* +*/ +rule "EVENT.MANAGER.CLEANUP" + when + $manager : ControlLoopEventManager( $clName : getClosedLoopControlName(), $requestId : getRequestId() ) + $operations : LinkedList() + from collect( ControlLoopOperationManager( onset.closedLoopControlName == $clName, + onset.getRequestId() == $requestId ) ) + $timers : LinkedList() + from collect( ControlLoopTimer( closedLoopControlName == $clName, + requestId == $requestId.toString() ) ) + $locks : LinkedList() + from collect( TargetLock (requestId == $requestId) ) + not( VirtualControlLoopEvent( closedLoopControlName == $clName, requestId == $requestId ) ) + then + + Logger logger = LoggerFactory.getLogger(drools.getRule().getPackage()); + logger.info("{}: {}", $clName, drools.getRule().getName()); + + logger.debug("{}: {}: manager={} timers={} operations={}", + $clName, drools.getRule().getName(), + $manager, $timers.size(), $operations.size()); + + // + // Retract EVERYTHING + // + retract($manager); + + for(Object manager: $operations) { + retract((ControlLoopOperationManager) manager); + } + for(Object timer: $timers) { + retract((ControlLoopTimer) timer); + } + for(Object lock: $locks) { + TargetLock tgt = (TargetLock) lock; + // + // Ensure we release the lock + // + PolicyGuard.unlockTarget(tgt); + retract(tgt); + } +end + +/* +* +* This rule will clean up any rogue onsets where there is no +* ControlLoopParams object corresponding to the onset event. +* +*/ +rule "EVENT.CLEANUP" + when + $event : VirtualControlLoopEvent( $clName: closedLoopControlName ) + not ( ControlLoopParams( getClosedLoopControlName() == $clName) ) + then + + Logger logger = LoggerFactory.getLogger(drools.getRule().getPackage()); + logger.info("{}: {}", $clName, drools.getRule().getName()); + logger.debug("{}: {}: orphan onset event={}", + $clName, drools.getRule().getName(), $event); + + retract($event); +end + +/* +* +* This rule responds to SDNR Response Events. +* +*/ +rule "SDNR.RESPONSE" + when + $params : ControlLoopParams( $clName : getClosedLoopControlName() ) + $event : VirtualControlLoopEvent( closedLoopControlName == $clName, + closedLoopEventStatus == ControlLoopEventStatus.ONSET ) + $manager : ControlLoopEventManager( closedLoopControlName == $event.getClosedLoopControlName(), + requestId == $event.getRequestId() ) + $operation : ControlLoopOperationManager( onset.closedLoopControlName == $event.getClosedLoopControlName(), + onset.getRequestId() == $event.getRequestId() ) + $opTimer : ControlLoopTimer( closedLoopControlName == $event.getClosedLoopControlName(), + requestId == $event.getRequestId().toString(), timerType == "Operation", !expired ) + $lock : TargetLock (requestId == $event.getRequestId()) + $response : PciResponseWrapper( getBody().getCommonHeader().getRequestId() == $event.getRequestId() ) + then + + Logger logger = LoggerFactory.getLogger(drools.getRule().getPackage()); + logger.info("{}: {}", $clName, $params.getPolicyName() + "." + drools.getRule().getName()); + logger.debug("{}: {}: event={} manager={} operation={} lock={} opTimer={} response={}", + $clName, $params.getPolicyName() + "." + drools.getRule().getName(), + $event, $manager, $operation, $lock, $operation, $opTimer, $response); + + // + // Get the result of the operation + // + PolicyResult policyResult = $operation.onResponse($response); + if (policyResult != null) { + logger.debug("{}: {}: operation finished - result={}", + $clName, $params.getPolicyName() + "." + drools.getRule().getName(), + policyResult); + + // + // This Operation has completed, construct a notification showing our results. (DB write - end operation) + // + VirtualControlLoopNotification notification = new VirtualControlLoopNotification($event); + notification.setFrom("policy"); + notification.setPolicyName($params.getPolicyName() + "." + drools.getRule().getName()); + notification.setPolicyScope($params.getPolicyScope()); + notification.setPolicyVersion($params.getPolicyVersion()); + notification.setMessage($operation.getOperationHistory()); + notification.setHistory($operation.getHistory()); + if (policyResult.equals(PolicyResult.SUCCESS)) { + notification.setNotification(ControlLoopNotificationType.OPERATION_SUCCESS); + } else { + notification.setNotification(ControlLoopNotificationType.OPERATION_FAILURE); + } + PolicyEngineConstants.getManager().deliver("POLICY-CL-MGT", notification); + + ControlLoopResponse clResponse = $operation.getControlLoopResponse($response, $event); + PolicyEngineConstants.getManager().deliver("DCAE_CL_RSP", clResponse); + // + // Ensure the operation is complete + // + if ($operation.isOperationComplete() == true) { + // + // It is complete, remove it from memory + // + retract($operation); + // + // We must also retract the timer object + // NOTE: We could write a Rule to do this + // + retract($opTimer); + // + // Complete the operation + // + modify($manager) {finishOperation($operation)}; + } else { + // + // Just doing this will kick off the LOCKED rule again + // + modify($operation) {}; + } + } else { + // + // Its not finished yet (i.e. expecting more Response objects) + // + // Or possibly it is a leftover response that we timed the request out previously + // + } + // + // We are going to retract these objects from memory + // + retract($response); +end + +/* +* +* Clean Up any lingering SDNR reponses. +* +*/ +rule "SDNR.RESPONSE.CLEANUP" + when + $params : ControlLoopParams( $clName : getClosedLoopControlName() ) + $response : PciResponseWrapper($id : getBody().getCommonHeader().getRequestId ) + not ( VirtualControlLoopEvent( requestId == $id, closedLoopEventStatus == ControlLoopEventStatus.ONSET ) ) + then + + Logger logger = LoggerFactory.getLogger(drools.getRule().getPackage()); + logger.info("{}: {}", $clName, $params.getPolicyName() + "." + drools.getRule().getName()); + logger.debug("{}: {}: orphan sdnr response={}", + $clName, $params.getPolicyName() + "." + drools.getRule().getName(), $id); + // + // Retract it + // + retract($response); +end -- cgit 1.2.3-korg