Remove policy-os and policy-base images

Remove the policy-os and policy-base images in favour of including their contents directly in the policy-pdp and policy-pe images

Issue-ID: POLICY-624
Change-Id: Ie4ef62d5a7fc0edb481be13891ee12cf9271674c
Signed-off-by: mmis <michael.morris@ericsson.com>

1 files changed, 0 insertions, 910 deletions

diff --git a/policy-drools/docker-install.sh b/policy-drools/docker-install.sh
deleted file mode 100644
index e65329da..00000000
--- a/policy-drools/docker-install.sh
+++ /dev/null
@@ -1,910 +0,0 @@
-#!/bin/bash
-
-###
-# ============LICENSE_START=======================================================
-# Installation Package
-# ================================================================================
-# Copyright (C) 2017 AT&T Intellectual Property. All rights reserved.
-# ================================================================================
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-# 
-#      http://www.apache.org/licenses/LICENSE-2.0
-# 
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-# ============LICENSE_END=========================================================
-###
-
-
-function JAVA_HOME() {
-	if [[ $DEBUG == y ]]; then
-		echo "-- ${FUNCNAME[0]} $@ --"
-		set -x
-	fi
-		
-	if [[ -z ${JAVA_HOME} ]]; then
-		echo "error: aborting installation: JAVA_HOME variable must be present in base.conf"
-		exit 1;
-	fi
-	
-	echo "JAVA_HOME is ${JAVA_HOME}"
-}
-
-function POLICY_HOME() {
-	if [[ $DEBUG == y ]]; then
-		echo "-- ${FUNCNAME[0]} $@ --"
-		set -x
-	fi
-	
-	local POLICY_HOME_ABS
-	
-	if [[ -z ${POLICY_HOME} ]]; then
-		echo "error: aborting installation: the installation directory POLICY_HOME must be set"
-		exit 1
-	fi
-	
-	POLICY_HOME_ABS=$(readlink -f "${POLICY_HOME}")
-	if [[ -n ${POLICY_HOME_ABS} ]]; then
-		export POLICY_HOME=${POLICY_HOME_ABS}
-	fi
-	
-	echo "POLICY_HOME is ${POLICY_HOME}"
-	
-	# Do not allow installations from within POLICY_HOME dir or sub-dirs
-	if [[ "$(pwd)/" == ${POLICY_HOME}/* ]]; then
-	 	echo "error: aborting installation: cannot be executed from '${POLICY_HOME}' or sub-directories. "
-	 	exit 1
-	fi
-}
-
-function check_java() {
-	if [[ $DEBUG == y ]]; then
-		echo "-- ${FUNCNAME[0]} $@ --"
-		set -x
-	fi
-	
-	local TARGET_JAVA_VERSION INSTALLED_JAVA_VERSION
-	
-	TARGET_JAVA_VERSION=$1
-	
-	if [[ -z ${JAVA_HOME} ]]; then
-		echo "error: ${JAVA_HOME} is not set"
-		return 1
-	fi
-	
-	if ! check_x_file "${JAVA_HOME}/bin/java"; then
-		echo "error: ${JAVA_HOME}/bin/java is not accessible"
-		return 1
-	fi
-	
-	INSTALLED_JAVA_VERSION=$("${JAVA_HOME}/bin/java" -version 2>&1 | awk -F '"' '/version/ {print $2}')
-	if [[ -z $INSTALLED_JAVA_VERSION ]]; then
-		echo "error: ${JAVA_HOME}/bin/java is invalid"
-		return 1
-	fi
-	
-	if [[ "${INSTALLED_JAVA_VERSION}" != ${TARGET_JAVA_VERSION}* ]]; then
-		echo "error: java version (${INSTALLED_JAVA_VERSION}) does not"\
-			 "march desired version ${TARGET_JAVA_VERSION}"
-		return 1
-	fi 
-	
-	echo "OK: java ${INSTALLED_JAVA_VERSION} installed"
-	
-	if ! type -p "${JAVA_HOME}/bin/keytool" > /dev/null 2>&1; then
-		echo "error: {JAVA_HOME}/bin/keytool is not installed"
-		return 1
-	fi
-}
-
-function process_configuration() {
-	if [[ $DEBUG == y ]]; then
-		echo "-- ${FUNCNAME[0]} $@ --"
-		set -x
-	fi
-
-	local CONF_FILE name value
-	
-	CONF_FILE=$1
-	while read line || [ -n "${line}" ]; do
-        if [[ -n ${line} ]] && [[ ${line} != *#* ]]; then
-	        name=$(echo "${line%%=*}")
-	        value=$(echo "${line#*=}")
-	        # escape ampersand so that sed does not replace it with the search string
-            value=${value//&/\\&}
-	        if [[ -z ${name} ]] || [[ -z $value ]]; then
-	        	echo "WARNING: ${line} missing name or value"
-	    	fi
-	    	export ${name}="${value}"
-	        eval "${name}" "${value}" 2> /dev/null
-        fi
-	done < "${CONF_FILE}"
-	return 0
-}
-
-function component_preinstall() {
-	if [[ $DEBUG == y ]]; then
-		echo "-- ${FUNCNAME[0]} $@ --"
-		set -x
-	fi
-
-	/bin/sed -i -e 's!${{POLICY_HOME}}!'"${POLICY_HOME}!g" \
-		-e 's!${{FQDN}}!'"${FQDN}!g" \
-		*.conf > /dev/null 2>&1
-}
-
-function configure_component() {
-	if [[ $DEBUG == y ]]; then
-		echo "-- ${FUNCNAME[0]} $@ --"
-		set -x
-	fi
-
-	local CONF_FILE COMPONENT_ROOT_DIR SED_LINE SED_FILES name value
-		
-	CONF_FILE=$1
-	COMPONENT_ROOT_DIR=$2
-	
-	SED_LINE="sed -i"
-	SED_LINE+=" -e 's!\${{POLICY_HOME}}!${POLICY_HOME}!g' "
-	SED_LINE+=" -e 's!\${{POLICY_USER}}!${POLICY_USER}!g' "
-	SED_LINE+=" -e 's!\${{POLICY_GROUP}}!${POLICY_GROUP}!g' "
-	SED_LINE+=" -e 's!\${{KEYSTORE_PASSWD}}!${KEYSTORE_PASSWD}!g' "
-	SED_LINE+=" -e 's!\${{JAVA_HOME}}!${JAVA_HOME}!g' "
-		
-	while read line || [ -n "${line}" ]; do
-		if [[ -n ${line} ]] && [[ ${line:0:1} != \# ]]; then
-			name=$(echo "${line%%=*}")
-			value=$(echo "${line#*=}")
-			# escape ampersand so that sed does not replace it with the search string
-			value=$(echo "${value}" | sed -e 's/[\/&]/\\&/g')
-	    	if [[ -z ${name} ]] || [[ -z ${value} ]]; then
-	        	echo "WARNING: ${line} missing name or value"
-	    	fi
-	    	SED_LINE+=" -e 's/\${{${name}}}/${value}/g' "
-        fi
-	done < "$CONF_FILE"
-	
-	SED_FILES=""
-	for sed_file in $(find "${COMPONENT_ROOT_DIR}" -type f -exec grep -Iq . {} \; -print 2> /dev/null); do
-		if fgrep -l '${{' ${sed_file} > /dev/null 2>&1; then
-			SED_FILES+="${sed_file} "
-		fi
-	done
-
-	if [[ -z ${SED_FILES} ]]; then
-		echo "WARNING: no files to perform variable expansion"
-	else
-		SED_LINE+=${SED_FILES}
-		eval "${SED_LINE}"
-	fi
-}
-
-function configure_settings() {
-	if [[ $DEBUG == y ]]; then
-		echo "-- ${FUNCNAME[0]} $@ --"
-		set -x
-	fi
-
-	# The goal is to have repositories for both 'release' and 'snapshot'
-	# artifacts. These may either be remote (e.g. Nexus) repositories, or
-	# a local file-based repository. 
-	local fileRepoID=file-repository
-	local fileRepoUrl=file:$HOME_M2/file-repository
-	mkdir -p "${fileRepoUrl#file:}"
-		
-	# The following parameters are also used outside of this function.
-	# if snapshotRepositoryUrl and/or releaseRepositoryUrl is defined,
-	# the corresponding ID and url will be updated below
-	releaseRepoID=${fileRepoID}
-	releaseRepoUrl=${fileRepoUrl}
-	snapshotRepoID=${fileRepoID}
-	snapshotRepoUrl=${fileRepoUrl}
-
-	# if both snapshotRepositoryUrl and releaseRepositoryUrl are null,
-	# use standalone-settings.xml that just defines the file-based repo.
-	# if only one of them is specified, use file-based repo for the other.
-	if [[ -z "$snapshotRepositoryUrl" && -z $releaseRepositoryUrl ]]; then
-		echo "snapshotRepositoryUrl and releaseRepositoryUrl properties not set, configuring settings.xml for standalone operation"
-		mv $HOME_M2/standalone-settings.xml $HOME_M2/settings.xml
-	else
-		rm $HOME_M2/standalone-settings.xml
-
-		if [[ -n "${snapshotRepositoryUrl}" ]] ; then
-			snapshotRepoID=${snapshotRepositoryID}
-			snapshotRepoUrl=${snapshotRepositoryUrl}
-		fi
-		if [[ -n "${releaseRepositoryUrl}" ]] ; then
-			releaseRepoID=${releaseRepositoryID}
-			releaseRepoUrl=${releaseRepositoryUrl}
-		fi
-	fi
-
-	SED_LINE="sed -i"
-	SED_LINE+=" -e 's!\${{snapshotRepositoryID}}!${snapshotRepoID}!g' "
-	SED_LINE+=" -e 's!\${{snapshotRepositoryUrl}}!${snapshotRepoUrl}!g' "
-	SED_LINE+=" -e 's!\${{releaseRepositoryID}}!${releaseRepoID}!g' "
-	SED_LINE+=" -e 's!\${{releaseRepositoryUrl}}!${releaseRepoUrl}!g' "
-	SED_LINE+=" -e 's!\${{repositoryUsername}}!${repositoryUsername}!g' "
-	SED_LINE+=" -e 's!\${{repositoryPassword}}!${repositoryPassword}!g' "
-	SED_LINE+=" -e 's!\${{fileRepoID}}!${fileRepoID}!g' "
-	SED_LINE+=" -e 's!\${{fileRepoUrl}}!${fileRepoUrl}!g' "
-	
-	SED_LINE+="$HOME_M2/settings.xml"
-	eval "${SED_LINE}"
-	
-}
-
-
-function check_r_file() {
-	if [[ $DEBUG == y ]]; then
-		echo "-- ${FUNCNAME[0]} $@ --"
-		set -x
-	fi
-
-	FILE=$1
-	if [[ ! -f ${FILE} || ! -r ${FILE} ]]; then
-        return 1
-	fi
-
-	return 0
-}
-
-function check_x_file() {	
-	if [[ $DEBUG == y ]]; then
-		echo "-- ${FUNCNAME[0]} $@ --"
-		set -x
-	fi
-
-	FILE=$1
-	if [[ ! -f ${FILE} || ! -x ${FILE} ]]; then
-        return 1
-	fi
-
-	return 0
-}
-
-function install_prereqs() {
-	if [[ $DEBUG == y ]]; then
-		echo "-- ${FUNCNAME[0]} $@ --"
-		set -x
-	fi
-
-	local CONF_FILE HOME_OWNER
-	
-	CONF_FILE=$1
-	
-	if ! check_r_file "${CONF_FILE}"; then
-		echo "error: aborting ${COMPONENT_TYPE} installation: ${CONF_FILE} is not accessible"
-		exit 1
-	fi
-	
-	if ! process_configuration "${CONF_FILE}"; then
-		echo "error: aborting ${COMPONENT_TYPE} installation: cannot process configuration ${CONF_FILE}"
-		exit 1
-	fi
-	
-	if ! check_java "1.8"; then
-		echo "error: aborting ${COMPONENT_TYPE} installation: invalid java version"
-		exit 1
-	fi
-	
-
-	if [[ -z ${POLICY_HOME} ]]; then
-		echo "error: aborting ${COMPONENT_TYPE} installation: ${POLICY_HOME} is not set"
-		exit 1	
-	fi
-
-	HOME_OWNER=$(ls -ld "${POLICY_HOME}" | awk '{print $3}')
-	if [[ ${HOME_OWNER} != ${POLICY_USER} ]]; then
-		echo "error: aborting ${COMPONENT_TYPE} installation: ${POLICY_USER} does not own ${POLICY_HOME} directory"
-		exit 1
-	fi
-	
-	echo -n "Starting ${OPERATION} of ${COMPONENT_TYPE} under ${POLICY_USER}:${POLICY_GROUP} "
-	echo "ownership with umask $(umask)."
-}
-
-function configure_base() {
-	if [[ $DEBUG == y ]]; then
-		echo "-- ${FUNCNAME[0]} $@ --"
-		set -x
-	fi
-
-	local BASH_PROFILE_LINE PROFILE_LINE
-	
-	# check if fqdn is set in base.conf and use that value if set
-	if [[ -z ${INSTALL_FQDN} ]]
-	then
-		echo "FQDN not set in config...using the default FQDN ${FQDN}"
-	else
-		echo "Using FQDN ${INSTALL_FQDN} from config"
-		FQDN=${INSTALL_FQDN}
-	fi
-
-	configure_component "${BASE_CONF}" "${POLICY_HOME}"
-	
-	configure_settings
-	
-	BASH_PROFILE_LINE=". ${POLICY_HOME}/etc/profile.d/env.sh"
-	PROFILE_LINE="ps -p \$\$ | grep -q bash || . ${POLICY_HOME}/etc/profile.d/env.sh"
-
-	# Note: adding to .bashrc instead of .bash_profile
-	if ! fgrep -x "${BASH_PROFILE_LINE}" "${HOME}/.bashrc" >/dev/null 2>&1; then
-		echo "${BASH_PROFILE_LINE}" >> "${HOME}/.bashrc"
-	fi
-
-	if ! fgrep -x "${PROFILE_LINE}" "${HOME}/.profile" >/dev/null 2>&1; then
-		echo "${PROFILE_LINE}" >> "${HOME}/.profile"
-	fi
-
-	. "${POLICY_HOME}/etc/profile.d/env.sh"
-	
-	cat "${POLICY_HOME}"/etc/cron.d/* | crontab
-}
-
-function install_base() {
-	if [[ $DEBUG == y ]]; then
-		echo "-- ${FUNCNAME[0]} $@ --"
-		set -x
-	fi
-
-	local POLICY_HOME_CONTENTS BASE_TGZ BASEX_TGZ BASH_PROFILE_LINE
-	
-	install_prereqs "${BASE_CONF}"
-
-	# following properties must be set:
-	# POLICY_HOME - installation directory, must exist and be writable
-
-	# test that all required properties are set
-	for var in POLICY_HOME JAVA_HOME
-	do
-		if [[ -z $(eval echo \$$var) ]]; then
-			echo "ERROR: $var must be set in $BASE_CONF"
-			exit 1
-		fi
-	done
-
-	if [[ ! ( -d "$POLICY_HOME" && -w "$POLICY_HOME" ) ]]; then
-		echo "ERROR: Installation directory $POLICY_HOME does not exist or not writable"
-		exit 1
-	fi
-
-	if ! /bin/rm -fr "${POLICY_HOME}"/* > /dev/null 2>&1; then
-		echo "error: aborting base installation: cannot delete the underlying ${POLICY_HOME} files"
-		exit 1
-	fi
-	
-	POLICY_HOME_CONTENTS=$(ls -A "${POLICY_HOME}" 2> /dev/null)
-	if [[ -n ${POLICY_HOME_CONTENTS} ]]; then
-		echo "error: aborting base installation: ${POLICY_HOME} directory is not empty"
-		exit 1
-	fi
-	
-	if ! /bin/mkdir -p "${POLICY_HOME}/logs/" > /dev/null 2>&1; then	
-		echo "error: aborting base installation: cannot create ${POLICY_HOME}/logs/"
-		exit 1
-	fi	
-	
-	BASE_TGZ=$(ls base-*.tar.gz)
-	if [ ! -r ${BASE_TGZ} ]; then
-		echo "error: aborting: base package is not accessible"
-		exit 1			
-	fi
-	
-	tar -tzf ${BASE_TGZ} > /dev/null 2>&1
-	if [[ $? != 0 ]]; then
-		echo >&2 "error: aborting installation: invalid base package file: ${BASE_TGZ}"
-		exit 1
-	fi
-	
-	BASEX_TGZ=$(ls basex-*.tar.gz 2> /dev/null)
-	if [ -z ${BASEX_TGZ} ]; then
-		echo "warning: no basex application package present"
-		BASEX_TGZ=
-	else
-		tar -tzf ${BASEX_TGZ} > /dev/null 2>&1
-		if [[ $? != 0 ]]; then
-			echo >&2 "warning: invalid basex application package tar file: ${BASEX_TGZ}"
-			BASEX_TGZ=
-		fi			
-	fi
-	
-	# Undo any changes in the $HOME directory if any
-	
-	BASH_PROFILE_LINE=". ${POLICY_HOME}/etc/profile.d/env.sh"
-#	PROFILE_LINE="ps -p \$\$ | grep -q bash || . ${POLICY_HOME}/etc/profile.d/env.sh"
-		
-	# Note: using .bashrc instead of .bash_profile
-	if [[ -f ${HOME}/.bashrc ]]; then
-		/bin/sed -i.bak "\:${BASH_PROFILE_LINE}:d" "${HOME}/.bashrc"
-	fi
-	
-#	if [[ -f ${HOME}/.profile ]]; then
-#		/bin/sed -i.bak "\:${PROFILE_LINE}:d" "${HOME}/.profile"
-#	fi
-	
-	tar -C ${POLICY_HOME} -xf ${BASE_TGZ} --no-same-owner
-	if [[ $? != 0 ]]; then
-		# this should not happened
-		echo "error: aborting base installation: base package cannot be unpacked: ${BASE_TGZ}"
-		exit 1
-	fi
-	
-	if [ ! -z ${BASEX_TGZ} ]; then
-		tar -C ${POLICY_HOME} -xf ${BASEX_TGZ} --no-same-owner
-		if [[ $? != 0 ]]; then
-			# this should not happened
-			echo "warning: basex package cannot be unpacked: ${BASEX_TGZ}"
-		fi
-	fi
-
-#	/bin/mkdir -p ${POLICY_HOME}/etc/ssl > /dev/null 2>&1
-#	/bin/mkdir -p ${POLICY_HOME}/etc/init.d > /dev/null 2>&1
-#	/bin/mkdir -p ${POLICY_HOME}/nagios/tmp > /dev/null 2>&1
-#	/bin/mkdir -p ${POLICY_HOME}/tmp > /dev/null 2>&1
-#	/bin/mkdir -p ${POLICY_HOME}/var > /dev/null 2>&1
-			
-#	chmod -R 755 ${POLICY_HOME}/nagios > /dev/null 2>&1
-	
-	if [[ -d $HOME_M2 ]]; then
-		echo "Renaming existing $HOME_M2 to $HOME/m2.$TIMESTAMP"
-		mv $HOME_M2 $HOME/m2.$TIMESTAMP
-		if [[ $? != 0 ]]; then
-			echo "WARNING: Failed to rename $HOME_M2 directory; will use old directory"
-		fi
-	fi
-	if [[ ! -d $HOME_M2 ]]; then
-		echo "Moving m2 directory to $HOME_M2"
-		mv $POLICY_HOME/m2 $HOME_M2
-		if [[ $? != 0 ]]; then
-			echo "ERROR: Error in moving m2 directory"
-			exit 1
-		fi
-	fi
-	
-	configure_base
-	
-	# save ${BASE_CONF} in PDP-D installation
-	cp "${BASE_CONF}" "${POLICY_HOME}"/etc/profile.d
-	
-#	if ! create_keystore; then
-#		echo "error: aborting base installation: creating keystore"
-#		exit 1
-#	fi
-	
-#	list_unexpanded_files ${POLICY_HOME}
-
-}
-
-function install_controller()
-{
-	if [[ $DEBUG == y ]]; then
-		echo "-- ${FUNCNAME[0]} $@ --"
-		set -x
-	fi
-
-	if [[ $DEBUG == y ]]; then
-		echo "-- ${FUNCNAME[0]} $@ --"
-		set -x
-	fi
-	
-	if [[ -f "${HOME}/.bashrc" ]]; then
-		source "${HOME}/.bashrc"
-	fi
-	
-	if [[ -z ${POLICY_HOME} ]]; then
-		echo "error: aborting installation: POLICY_HOME environment variable is not set."
-		exit 1	
-	fi
-	
-	if ! check_r_file ${POLICY_HOME}/etc/profile.d/env.sh; then
-		echo "error: aborting installation: ${POLICY_HOME}/etc/profile.d/env.sh is not accessible"
-		exit 1	
-	fi
-
-	local CONTROLLER_CONF CONTROLLER_ZIP RULES_JAR SOURCE_DIR CONTROLLER_DIR AAAA BBBB PORT UTOPIC ARTIFACT_VERSION
-	
-	CONTROLLER_CONF=$COMPONENT_TYPE.conf
-	install_prereqs "${CONTROLLER_CONF}"
-
-	# following properties must be set in conf file:
-	# CONTROLLER_ARTIFACT_ID - Maven artifactId for controller
-	# CONTROLLER_NAME - directory name for the controller; controller will be installed to
-	#                   $POLICY_HOME/controllers/$CONTROLLER_NAME
-	# CONTROLLER_PORT - port number for the controller REST interface
-	# RULES_ARTIFACT -  rules artifact specifier: groupId:artifactId:version
-	
-	# test that all required properties are set
-	for var in CONTROLLER_ARTIFACT_ID CONTROLLER_NAME CONTROLLER_PORT RULES_ARTIFACT UEB_TOPIC
-	do
-		if [[ -z $(eval echo \$$var) ]]; then
-			echo "ERROR: $var must be set in $CONTROLLER_CONF"
-			exit 1
-		fi
-	done
-	
-	CONTROLLER_ZIP=$(ls $CONTROLLER_ARTIFACT_ID*.zip 2>&-)
-	if [[ -z $CONTROLLER_ZIP ]]; then
-		echo "ERROR: Cannot find controller zip file ($CONTROLLER_ARTIFACT_ID*.zip)"
-		exit 1
-	fi
-
-	if [[ ! "$CONTROLLER_NAME" =~ ^[A-Za-z0-9_-]+$ ]]; then
-		echo "ERROR: CONTROLLER_NAME may only contain alphanumeric, underscore, and dash characters"
-		exit 1
-	fi
-
-	if [[ ! "$CONTROLLER_PORT" =~ ^[0-9]+$ ]]; then
-		echo "ERROR: CONTROLLER_PORT is not a valid integer"
-		exit 1
-	fi
-
-	# split artifact string into parts
-	IFS=: read RULES_GROUPID RULES_ARTIFACTID RULES_VERSION <<<$RULES_ARTIFACT
-	if [[ -z $RULES_GROUPID || -z $RULES_ARTIFACTID || -z $RULES_VERSION ]]; then
-		echo "ERROR: Invalid setting for RULES_ARTIFACT property"
-		exit 1
-	fi
-
-	#RULES_JAR=$RULES_ARTIFACTID-$RULES_VERSION.jar
-	RULES_JAR=$(echo ${RULES_ARTIFACTID}-*.jar)
-	if ! check_r_file $RULES_JAR; then
-		echo "WARNING: Rules jar file $RULES_JAR not found in installer package, must be installed manually"
-		RULES_JAR=
-	fi
-
-
-	SOURCE_DIR=$PWD
-	CONTROLLER_DIR=$POLICY_HOME
-
-	cd $CONTROLLER_DIR
-
-	echo "Unpacking controller zip file"
-	# use jar command in case unzip not present on system
-	jar xf $SOURCE_DIR/$CONTROLLER_ZIP
-	if [[ $? != 0 ]]; then
-		echo "ERROR: unpack of controller zip file failed, install aborted"
-		exit 1
-	fi
-
-	chmod +x bin/*
-
-	# Perform base variable replacement in controller config file
-	configure_component "${SOURCE_DIR}/${BASE_CONF}" "${CONTROLLER_DIR}"
-	
-	# Perform variable replacements in config files.
-	# config files may contain the following strings that need to be replaced with
-	# real values:
-	#	AAAA - artifactId
-	#	BBBB - Substring of AAAA after first dash (stripping initial "ncomp-" or "policy-")
-	#	PORT - Port number for REST server
-
-	echo "Performing variable replacement in config files"
-	AAAA=$CONTROLLER_ARTIFACT_ID
-	BBBB=${AAAA#[a-z]*-}
-	PORT=$CONTROLLER_PORT
-	UTOPIC=${UEB_TOPIC}
-
-	for file in config/*
-	do
-		sed -i -e "s/AAAA/$AAAA/" -e "s/BBBB/$BBBB/" -e "s/PORT/$PORT/" -e "s!\${{UEB_TOPIC}}!${UTOPIC}!" $file
-		if [[ $? != 0 ]]; then
-			echo "ERROR: variable replacement failed for file $file, install aborted"
-			exit 1
-		fi
-	done
-
-	# append properties for rules artifact to server properties
-	cat >>config/server.properties <<EOF
-
-rules.groupId=$RULES_GROUPID
-rules.artifactId=$RULES_ARTIFACTID
-rules.version=$RULES_VERSION
-EOF
-
-	# TODO: run pw.sh script to set passwords
-
-	# return to directory where we started
-	cd $SOURCE_DIR
-	
-	# install rules jar into repository if present
-	if [[ -n $RULES_JAR ]]; then
-		# can't use RULES_VERSION because may be set to "LATEST",
-		# so extract version from the jar filename
-		ARTIFACT_VERSION=$(sed -e "s/${RULES_ARTIFACTID}-//" -e "s/\.jar//" <<<${RULES_JAR})
-		if [[ -n $repositoryUrl ]]; then
-			echo "Deploying rules artifact to Policy Repository"
-			mvn deploy:deploy-file -Dfile=$RULES_JAR \
-				-DgroupId=$RULES_GROUPID -DartifactId=$RULES_ARTIFACTID -Dversion=$ARTIFACT_VERSION \
-				-DrepositoryId=${repositoryID} -Durl=${repositoryUrl} \
-				-DgeneratePom=true -DupdateReleaseInfo=true
-		else
-			echo "Installing rules artifact into local .m2 repository"
-			mvn --offline org.apache.maven.plugins:maven-install-plugin:2.5.2:install-file \
-				-Dfile=$RULES_JAR -DgeneratePom=true -DupdateReleaseInfo=true
-		fi
-	fi
-
-	update_monitor $CONTROLLER_NAME
-
-	# save install configuration as an environment file
-	ln -s -f "${POLICY_HOME}/etc/profile.d/${BASE_CONF}" "${POLICY_HOME}/config/${BASE_CONF}.environment"
-}
-
-
-function update_monitor() {
-	if [[ $DEBUG == y ]]; then
-		echo "-- ${FUNCNAME[0]} $@ --"
-		set -x
-	fi
-
-	local NAME lastline
-	
-	NAME=$1
-	
-	if [[ -f ${POLICY_HOME}/etc/monitor/monitor.cfg ]]; then
-		if grep -q "^${NAME}=" ${POLICY_HOME}/etc/monitor/monitor.cfg; then
-			echo "OK: updating monitoring entry for ${NAME}"
-			/bin/sed -i.bak \
-				-e "s/^${NAME}=.*/${NAME}=off/g" \
-				${POLICY_HOME}/etc/monitor/monitor.cfg
-		else
-			# make sure file ends with newline
-			lastline=$(tail -n 1 ${POLICY_HOME}/etc/monitor/monitor.cfg; echo x)
-			lastline=${lastline%x}
-			if [ "${lastline: -1}" = $'\n' ]; then
-				echo "OK: adding an entry for ${NAME} in ${POLICY_HOME}/etc/monitor/monitor.cfg"
-			else
-				echo "OK: adding an entry for ${NAME} in ${POLICY_HOME}/etc/monitor/monitor.cfg (with newline)"
-				echo "" >> ${POLICY_HOME}/etc/monitor/monitor.cfg
-			fi
-
-
-			echo "${NAME}=off" >> ${POLICY_HOME}/etc/monitor/monitor.cfg
-		fi
-	else
-		echo "WARNING: ${POLICY_HOME}/etc/monitor/monitor.cfg does not exist. No monitoring enabled."	
-	fi
-}
-
-# Usage: getPomAttributes <pom-file> <attribute> ...
-#
-# This function performs simplistic parsing of a 'pom.xml' file, extracting
-# the specified attributes (e.g. 'groupId', 'artifactId', 'version'). The
-# attributes are returned as environment variables with the associated name.
-
-function getPomAttributes
-{
-	local tab=$'\t'
-	local rval=0
-	local file="$1"
-	local attr
-	local value
-	shift
-	for attr in "$@" ; do
-		# Try to fetch the parameter associated with the 'pom.xml' file.
-		# Initially, the 'parent' element is excluded. If the desired
-		# parameter is not found, the 'parent' element is included in the
-		# second attempt.
-		value=$(sed -n \
-			-e '/<parent>/,/<\/parent>/d' \
-			-e '/<dependencies>/,/<\/dependencies>/d' \
-			-e '/<build>/,/<\/build>/d' \
-			-e "/^[ ${tab}]*<${attr}>\([^<]*\)<\/${attr}>.*/{s//\1/p;}" \
-			<"${file}")
-
-		if [[ "${value}" == "" ]] ; then
-			# need to check parent for parameter
-			value=$(sed -n \
-				-e '/<dependencies>/,/<\/dependencies>/d' \
-				-e '/<build>/,/<\/build>/d' \
-				-e "/^[ ${tab}]*<${attr}>\([^<]*\)<\/${attr}>.*/{s//\1/p;}" \
-				<"${file}")
-			if [[ "${value}" == "" ]] ; then
-				echo "${file}: Can't determine ${attr}" >&2
-				rval=1
-			fi
-		fi
-		# the following sets an environment variable with the name referred
-		# to by ${attr}
-		read ${attr} <<<"${value}"
-	done
-	return ${rval}
-}
-
-
-# Usage: installPom <pom-file>
-#
-# This function installs a 'pom.xml' file in the local repository
-
-function installPom
-{
-	# need to extract attributes from POM file
-	if getPomAttributes "${1}" artifactId groupId version ; then
-		local repoID repoUrl
-		if [[ "${version}" =~ SNAPSHOT ]] ; then
-			repoID=${snapshotRepoID}
-			repoUrl=${snapshotRepoUrl}
-		else
-			repoID=${releaseRepoID}
-			repoUrl=${releaseRepoUrl}
-		fi
-		echo "${1}: Deploying POM artifact to remote repository"
-		mvn deploy:deploy-file -Dfile="$1" \
-			-Dpackaging=pom -DgeneratePom=false \
-			-DgroupId=${groupId} \
-			-DartifactId=${artifactId} \
-			-Dversion=${version} \
-			-DrepositoryId=${repoID} -Durl=${repoUrl} \
-			-DupdateReleaseInfo=true
-	else
-		echo "${1}: Can't install pom due to missing attributes" >&2
-		return 1
-	fi
-}
-
-# Usage: installJar <jar-file>
-#
-# This function installs a JAR file in the local repository, as well as
-# the 'pom.xml' member it contains.
-
-function installJar
-{
-	local dir=$(mktemp -d)
-	local jar="${1##*/}"
-	cp -p "${1}" "${dir}/${jar}"
-
-	(
-		local rval=0
-		cd "${dir}"
-		# determine name of 'pom' file within JAR
-		local pom=$(jar tf ${jar} META-INF | grep '/pom\.xml$' | head -1)
-		if [[ "${pom}" ]] ; then
-			# extract pom file
-			jar xf ${jar} "${pom}"
-
-			# determine version from pom file
-			if getPomAttributes "${pom}" version ; then
-				local repoID repoUrl
-				if [[ "${version}" =~ SNAPSHOT ]] ; then
-					repoID=${snapshotRepoID}
-					repoUrl=${snapshotRepoUrl}
-				else
-					repoID=${releaseRepoID}
-					repoUrl=${releaseRepoUrl}
-				fi
-				echo "${1}: Deploying JAR artifact to remote repository"
-				mvn deploy:deploy-file \
-					-Dfile=${jar} \
-					-Dversion=${version} \
-					-Dpackaging=jar -DgeneratePom=false -DpomFile=${pom} \
-					-DrepositoryId=${repoID} -Durl=${repoUrl} \
-					-DupdateReleaseInfo=true
-			else
-				echo "${1}: Can't determine version from 'pom.xml'" >&2
-				rval=1
-			fi
-		else
-			echo "${1}: Can't find 'pom.xml'" >&2
-			rval=1
-		fi
-		rm -rf ${dir}
-		return ${rval}
-	)
-}
-
-# Unzip the 'artifacts-*.zip' file, and install all of the associated
-# artifacts into the local repository.
-
-function installArtifacts
-{
-	local file
-	if [[ -f $(echo artifacts-*.zip) ]] ; then
-		# use jar command in case unzip not present on system
-		jar xf artifacts-*.zip
-		for file in artifacts/* ; do
-			case "${file}" in
-				*pom.xml|*.pom) installPom "${file}";;
-				*.jar) installJar "${file}";;
-				*) echo "${file}: Don't know how to install artifact" >&2;;
-			esac
-		done
-	fi
-}
-
-function installFeatures
-{
-	if [[ $DEBUG == y ]]; then
-		echo "-- ${FUNCNAME[0]} $@ --"
-		set -x
-	fi
-
-	local name featureConf
-	export FEATURES_HOME="${POLICY_HOME}/${FEATURES_DIR}"
-	echo "FEATURES_HOME is ${FEATURES_HOME}"
-	
-	mkdir -p "${FEATURES_HOME}" > /dev/null 2>&1
-	if [[ -d "${FEATURES_HOME}" && -x "${FEATURES_HOME}" ]]; then
-		SOURCE_DIR=$PWD
-		for feature in feature-*.zip ; do
-			name="${feature#feature-}"
-			name="${name%-[0-9]*\.zip}"
-			mkdir -p "${FEATURES_HOME}/${name}" > /dev/null 2>&1
-			(cd "${FEATURES_HOME}/${name}"; jar xf ${SOURCE_DIR}/${feature})
-			featureConf="feature-${name}.conf"
-			if [[ -r "${featureConf}" ]]; then
-				configure_component "${featureConf}" "${FEATURES_HOME}"
-				cp "${featureConf}" "${POLICY_HOME}"/etc/profile.d
-				echo "feature ${name} has been installed (configuration present)"
-			else
-				echo "feature ${name} has been installed (no configuration present)"
-			fi
-		done
-		
-		echo "applying base configuration to features"
-		configure_component "${BASE_CONF}" "${FEATURES_HOME}"
-	else
-		echo "error: aborting ${FEATURES_HOME} is not accessible"
-		exit 1
-	fi
-}
-
-function do_install()
-{
-	if [[ $DEBUG == y ]]; then
-		echo "-- ${FUNCNAME[0]} $@ --"
-		set -x
-	fi
-
-	echo "Starting installation at $(date)"
-	echo
-	
-	COMPONENT_TYPE=base
-	BASE_CONF=base.conf
-	install_base
-	component_preinstall
-
-	COMPONENT_TYPE=policy-management
-	install_controller
-	
-	installFeatures
-	installArtifacts
-
-
-	if [[ -f apps-installer ]]; then
-		# if exists, any customizations to the 
-		# base drools installation from the drools apps
-		# is executed here
-
-		./apps-installer
-	fi
-	
-	echo
-	echo "Installation complete"
-	echo "Please logoff and login again to update shell environment"
-	
-}
-
-export POLICY_USER=$(/usr/bin/id -un)
-export POLICY_GROUP=$POLICY_USER
-	
-FQDN=$(hostname -f 2> /dev/null)
-if [[ $? != 0 || -z ${FQDN} ]]; then
-	echo "error: cannot determine the FQDN for this host $(hostname)."
-	exit 1
-fi
-
-TIMESTAMP=$(date "+%Y%m%d-%H%M%S")
-LOGFILE=$PWD/install.log.$TIMESTAMP
-
-OPERATION=install
-BASE_CONF=base.conf
-HOME_M2=$HOME/.m2
-FEATURES_DIR="features"
-
-do_install 2>&1 | tee $LOGFILE