From c6d74e6cee17405b9d26506b06259ccb2f38c737 Mon Sep 17 00:00:00 2001 From: ramverma Date: Wed, 11 Jul 2018 14:21:13 +0100 Subject: Adding client deployment module to apex-pdp Change-Id: Idd74e9846c3fa75d305a9dde98a98d92dd0520a9 Issue-ID: POLICY-864 Signed-off-by: ramverma --- .../src/main/resources/webapp/css/apexChartLib.css | 74 - .../main/resources/webapp/css/interfaceAssets.css | 3454 ----- .../src/main/resources/webapp/css/styles.css | 441 - .../src/main/resources/webapp/index.html | 5 +- .../src/main/resources/webapp/js/ApexAjax.js | 113 +- .../src/main/resources/webapp/js/ApexChart.js | 410 +- .../src/main/resources/webapp/js/ApexContext.js | 115 +- .../main/resources/webapp/js/ApexEngineService.js | 123 +- .../main/resources/webapp/js/ApexEngineStatus.js | 261 +- .../main/resources/webapp/js/ApexEngineSummary.js | 204 +- .../main/resources/webapp/js/ApexServicesMain.js | 364 +- .../src/main/resources/webapp/js/ApexTable.js | 45 +- .../src/main/resources/webapp/js/ApexUtils.js | 479 +- .../src/main/resources/webapp/js/avsc/avsc.js | 958 +- .../resources/webapp/js/jquery/jquery-1.12.4.js | 13201 ------------------- 15 files changed, 1513 insertions(+), 18734 deletions(-) delete mode 100644 client/client-monitoring/src/main/resources/webapp/css/apexChartLib.css delete mode 100644 client/client-monitoring/src/main/resources/webapp/css/interfaceAssets.css delete mode 100644 client/client-monitoring/src/main/resources/webapp/css/styles.css delete mode 100644 client/client-monitoring/src/main/resources/webapp/js/jquery/jquery-1.12.4.js (limited to 'client/client-monitoring/src/main') diff --git a/client/client-monitoring/src/main/resources/webapp/css/apexChartLib.css b/client/client-monitoring/src/main/resources/webapp/css/apexChartLib.css deleted file mode 100644 index 628fc0eb9..000000000 --- a/client/client-monitoring/src/main/resources/webapp/css/apexChartLib.css +++ /dev/null @@ -1,74 +0,0 @@ -/* - * ============LICENSE_START======================================================= - * Copyright (C) 2016-2018 Ericsson. All rights reserved. - * ================================================================================ - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - * SPDX-License-Identifier: Apache-2.0 - * ============LICENSE_END========================================================= - */ -path { // - stroke: #5fbadd; - stroke-width: 2; - fill: none; -} - -.axis path, .axis line { - fill: none; - stroke: grey; - stroke-width: 1; - shape-rendering: crispEdges; -} - -.tooltip { - position: absolute; - text-align: center; - width: 90px; - height: 42px; - padding: 2px; - font: 12px sans-serif; - background: white; - border: 2px solid grey; - border-radius: 8px; - pointer-events: none; -} - -.apexChart { - display: inline-block; - position: relative; - width: 45%; - padding-bottom: 21%; - vertical-align: top; - overflow: hidden; -} - -.apexChart:nth-child(even) { - margin-left: 50px; -} - -.svg-content-responsive { - display: inline-block; - position: absolute; - top: 10px; - left: 0; -} - -.apexChart_inline { - display: inline-block; - position: relative; - width: 45%; - padding-bottom: 21%; - vertical-align: top; - overflow: hidden; - margin-left: -25px; -} \ No newline at end of file diff --git a/client/client-monitoring/src/main/resources/webapp/css/interfaceAssets.css b/client/client-monitoring/src/main/resources/webapp/css/interfaceAssets.css deleted file mode 100644 index acb8fe23b..000000000 --- a/client/client-monitoring/src/main/resources/webapp/css/interfaceAssets.css +++ /dev/null @@ -1,3454 +0,0 @@ -/* - * ============LICENSE_START======================================================= - * Copyright (C) 2016-2018 Ericsson. All rights reserved. - * ================================================================================ - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - * SPDX-License-Identifier: Apache-2.0 - * ============LICENSE_END========================================================= - */ -@charset "utf-8"; - -html { - position: relative; - font-family: Arial, Helvetica, sans-serif; - font-size: 10px !important; - line-height: 10px !important; - margin: 0; - padding: 0; - width: 100%; - height: 100%; -} - -body { - font-size: 1.6rem; - line-height: 1.2rem; - color: #333333; - background-color: #ffffff; - margin: 0; - padding: 0; -} - -*:focus, .ebInput:focus, .ebIcon:focus, .ebCheckbox:focus+.ebCheckbox-inputStatus:after, - .ebRadioBtn:focus+.ebRadioBtn-inputStatus:after, textarea:focus, button:focus, - i:focus { - /** - * FF outline do not looks same as Chrome so adding box shadow - * FF outline is not working as expected - **/ - /* - * one way of outline - outline: #4d90fe auto 5px; - box-shadow: 0 0 0 1px #4d90fe; - -webkit-box-shadow: none; - */ - outline: none; // - box-shadow: 0 0 2px 1px #FFFFFF; -} - -h1, h2, h3, h4, h5, h6 { - color: #4d4d4d; - font-weight: bold; -} - -h1 { - line-height: 3.2rem; - font-size: 3.2rem; - font-weight: normal; - padding: 0.6rem 0; - margin: 0 0 0.6rem 0; -} - -h2 { - border-bottom: #000000 solid 1px; - line-height: 2.0rem; - font-size: 2.0rem; - font-weight: normal; - padding: 1.2rem 0 0.7rem 0; - margin: 0 0 0.4rem 0; -} - -h3 { - border-bottom: #7f7f7f solid 1px; - line-height: 1.6rem; - font-size: 1.6rem; - padding: 1.2rem 0 0.7rem 0; - margin: 0 0 0.4rem 0; - font-weight: normal; - color: #333333; -} - -h4 { - border-bottom: #b2b2b2 solid 1px; - line-height: 1.2rem; - font-size: 1.2rem; - padding: 0.6rem 0; - margin: 0 0 0.6rem 0; - font-weight: bold; - color: #333333; -} - -.ebLayout-SectionSubheading h3 { - float: left; - margin: 0; - border-bottom: none; -} - -/* System Bar */ -.ebSystemBar { - position: relative; - width: 100%; - height: 40px; - border-top: 4px solid #0066b3; - background-image: linear-gradient(180deg, #ffffff 0%, #f4f4f4 100%); - box-shadow: 0 1px 2px #D2D2D2; -} - -.ebSystemBar::before { - position: absolute; - top: -4px; - left: 0; - width: 100%; - height: 4px; - content: ""; - font-size: 0; - background: #0066b3; - background: -o-linear-gradient(left, #a2c517 10%, #009046 30%, #0082b6 50%, #151f77 - 75%, #db0050 100%); - background: -moz-linear-gradient(left, #a2c517 10%, #009046 30%, #0082b6 50%, - #151f77 75%, #db0050 100%); - background: -webkit-linear-gradient(left, #a2c517 10%, #009046 30%, #0082b6 50%, - #151f77 75%, #db0050 100%); - background: -ms-linear-gradient(left, #a2c517 10%, #009046 30%, #0082b6 50%, #151f77 - 75%, #db0050 100%); - background: -webkit-gradient(linear, left top, right top, color-stop(0.1, #a2c517), - color-stop(0.3, #009046), color-stop(0.5, #0082b6), - color-stop(0.75, #151f77), color-stop(1, #db0050)); - background: linear-gradient(left, #a2c517 10%, #009046 30%, #0082b6 50%, #151f77 75% - , #db0050 100%); -} - -.ebSystemBar-logo { - position: absolute; - top: 0; - bottom: 0; - left: 0; - height: 40px; - width: 20px; - padding: 0 10px; - background: url('../resources/systemBar/econ01.svg') no-repeat center - center transparent; - background-size: 20px; -} - -.ebSystemBar-topMenuName { - display: inline-block; - padding: 0 5px 0 40px; - margin: 0; - line-height: 40px; - font-size: 16.8px; - color: #58585A; -} - -.ebSystemBar-topMenu { - position: absolute; - top: 0; - bottom: 0; - left: 50px; - list-style: none; - height: 40px; - margin: 0; - padding: 0; -} - -.ebSystemBar-topMenu li { - display: inline-block; -} - -.ebSystemBar-topMenu a { - padding: 0 5px 0 15px; - margin: 0; - font-size: 1.6em; - line-height: 40px; - color: #58585a; - cursor: pointer; - text-decoration: none; -} - -.ebSystemBar-topMenu a:hover { - color: #0066B3; -} - -.ebSystemBar-rightButton { - float: right; - display: inline-block; - line-height: 40px; - vertical-align: middle; -} - -.ebSystemBar-rightButton a { - display: block; - padding: 0 18px 0 18px; - font-size: 1.3rem; - color: #0066B3; - background-color: transparent; - background-repeat: no-repeat; - background-position: 18px center; - border-left: solid 1px #D2D2D2; -} - -.ebSystemBar-rightButton a:hover { - text-decoration: underline; -} - -.ebSystemBar-rightButton:hover { - background-image: linear-gradient(180deg, #f2f2f2 0%, #e8e8e8 100%); -} - -@media screen and (max-width: 640px) { - .ebSystemBar-topBar-rightButton a { - width: 0; - padding-left: 34px; - text-indent: -9999px; - } -} - -/* Inline Message */ -.ebInlineMessage { - padding: 5px 15px 0px 7px; - font-size: 0; - position: fixed; - bottom: 0; - left: 2; - width: calc(100% - 30px); - height: 66px; - border: 3px solid #adadad; - background-color: #FFFFFF; -} - -.ebInlineMessage-iconHolder, .ebInlineMessage-contentHolder { - display: inline-block; - vertical-align: top; -} - -.ebInlineMessage-iconHolder { - width: 20px; - margin: 0 12px 0 0; -} - -.ebInlineMessage-contentHolder { - width: calc(100% - 32px); - font-size: 1.2rem; -} - -.ebInlineMessage-header { - margin-top: 3px; - font-size: 14px; - line-height: 14px; -} - -.ebInlineMessage-separator { - height: 1px; - margin: 12px 0; - background-color: #adadad; - opacity: 0.3; -} - -.ebInlineMessage-description { - color: #666666; - white-space: pre; -} - -/* Table */ -.ebTable { - margin: 0; - padding: 0; - table-layout: fixed; - border-left: 1px solid #cccccc; // - ewatkmi: added for visible border; - border-right: 1px solid #cccccc; // - ewatkmi: added for visible border; - border-bottom: 1px solid #cccccc; // - ewatkmi: added for visible border; - border-collapse: collapse; - border-spacing: 0; - color: #1a1a1a; -} - -.ebTable_fullW { - width: 100%; -} - -.ebTable-th_resizable, .ebTable-th_sortable { - position: relative; -} - -.ebTable-th_resizable .ebTable-headerResize { - position: absolute; - top: -20px; - bottom: -20px; - right: -12px; - width: 10px; - cursor: col-resize; - -khtml-user-select: none; - -moz-user-select: none; - -o-user-select: none; - -webkit-user-select: none; - user-select: none; -} - -.ebTable-th_sortable { - cursor: pointer !important; -} - -.ebTable-th_sortable .ebTable-header { - display: flex; - flex-wrap: nowrap; - flex-direction: row; - align-items: center; -} - -.ebTable-th_sortable .ebTable-headerText { - flex-shrink: 1; - flex-grow: 0; - margin-right: 8px; - box-sizing: border-box; - -khtml-user-select: none; - -moz-user-select: none; - -o-user-select: none; - -webkit-user-select: none; - user-select: none; -} - -.ebTable-th_sortable .ebTable-headerSort { - flex-grow: 0; - flex-shrink: 0; - flex-basis: 10px; - margin-left: 4px; -} - -.ebTable-th_sortable .ebTable-headerSortOrder { - flex-grow: 1; - color: #999999; - font-weight: normal; -} - -.ebTable-header { - position: relative; - display: block; - width: 100%; - -moz-box-sizing: border-box; - box-sizing: border-box; -} - -.ebTable-headerText { - padding: 4px 0; - display: inline-block; - vertical-align: middle; - width: 100%; - overflow: hidden; - white-space: nowrap; - text-overflow: ellipsis; -} - -.ebTable thead tr { - height: 3.2rem; - font-size: 1.2rem; - font-weight: bold; - text-align: left; -} - -.ebTable thead tr th { - padding-left: 1.2rem; - padding-right: 1.2rem; - text-align: left; - cursor: default; - border-top: #cccccc solid 1px; - border-bottom: #cccccc solid 1px; - border-right: #e6e6e6 solid 1px; - overflow: hidden; - text-overflow: ellipsis; - white-space: nowrap; -} - -.ebTable thead tr th:last-child { - border-right: none; -} - -.ebTable thead tr:hover { - background: none; -} - -.ebTable thead tr:active { - background: none; -} - -.ebTable tbody tr { - height: 3.2rem; - font-size: 1.2rem; - border-bottom: #e6e6e6 solid 1px; -} - -.ebTable tbody tr td { - margin: 0; - padding: 0 1.2rem; - overflow: hidden; - text-overflow: ellipsis; - white-space: nowrap; - cursor: default; - border-right: #e6e6e6 solid 1px; -} - -.ebTable tbody tr td:last-child { - border-right: none; -} - -.ebTable_striped tbody tr { - border-bottom: none; -} - -.ebTable_striped tbody tr td { - border-right: none; -} - -.ebTable_striped tbody tr:nth-of-type(even) { - background-color: #f2f2f2; -} - -.ebTable_striped tbody tr:nth-of-type(odd) { // - ewatkmi: added for nested tables; - background-color: #ffffff; -} - -.ebTable_compact tbody tr { - height: 2.6rem; -} - -.ebTable_expandableStriped { - border-collapse: separate; -} - -.ebTable_expandableStriped tbody tr { - border-bottom: none; -} - -.ebTable_expandableStriped tbody tr td { - border-right: none; -} - -.ebTable_expandableStriped tbody tr:nth-of-type(4n-1), - .ebTable_expandableStriped tbody tr:nth-of-type(4n) { - background-color: #f2f2f2; -} - -.ebTable_pinstripe tr td { - border-bottom: #e6e6e6 solid 1px; -} - -.ebTable_color_paleBlue.ebTable thead tr th { - background-color: #99ddee; - border-top: none; - border-bottom: none; -} - -.ebTable_color_paleBlue.ebTable_striped tbody tr:nth-of-type(even) { - background-color: #e6f6fb; -} - -.ebTable_color_purple.ebTable thead tr th { - background-color: #ca9bc1; - border-top: none; - border-bottom: none; -} - -.ebTable_color_purple.ebTable_striped tbody tr:nth-of-type(even) { - background-color: #f2e6ef; -} - -.ebTable_color_darkGreen.ebTable thead tr th { - background-color: #99c0bf; - border-top: none; - border-bottom: none; -} - -.ebTable_color_darkGreen.ebTable_striped tbody tr:nth-of-type(even) { - background-color: #e6efef; -} - -.ebTable_color_green.ebTable thead tr th { - background-color: #d0e3a2; - border-top: none; - border-bottom: none; -} - -.ebTable_color_green.ebTable_striped tbody tr:nth-of-type(even) { - background-color: #f3f8e8; -} - -.ebTable_color_yellow.ebTable thead tr th { - background-color: #fde499; - border-top: none; - border-bottom: none; -} - -.ebTable_color_yellow.ebTable_striped tbody tr:nth-of-type(even) { - background-color: #fff8e6; -} - -.ebTable_color_orange.ebTable thead tr th { - background-color: #f9d099; - border-top: none; - border-bottom: none; -} - -.ebTable_color_orange.ebTable_striped tbody tr:nth-of-type(even) { - background-color: #fef3e6; -} - -.ebTable_color_red.ebTable thead tr th { - background-color: #f4a6a3; - border-top: none; - border-bottom: none; -} - -.ebTable_color_red.ebTable_striped tbody tr:nth-of-type(even) { - background-color: #fce9e8; -} - -.ebTable_borderTop_none thead tr th { - border-top: none; -} - -.ebTable_verticalBorders_none thead tr th, .ebTable_verticalBorders_none tr td - { - border-right: none !important; - border-left: none !important; -} - -.ebTable_wrapHeaders th { - white-space: normal !important; - text-overflow: inherit !important; -} - -.ebTable_wrapHeaders th .ebTable-headerText { - white-space: normal !important; - text-overflow: inherit !important; -} - -.ebTable-expandableRow { - height: inherit !important; - display: none; -} - -.ebTable-expandableRow_expanded { - display: table-row; -} - -.ebTable-expandableRow>td { - padding: 0 !important; -} - -.ebTable-expandableRow>td>div { - overflow: hidden; - height: 0; - transition: height 0.3s ease-in-out; -} -/** - * Hover/Active/Selected Effects - * - * Modifiers: - * .ebTable_hoverActive_none (disables native hover and active selectors, primarily for pin columns plugin) - */ -.ebTable { - /** Hover effect **/ - -} - -.ebTable.ebTable:not (.ebTable_hoverActive_none ) tbody tr:not (.ebTable-expandableRow - ):not (.headerRow ):hover>*, .ebTable tbody tr:not (.ebTable-expandableRow - ):not (.headerRow ).ebTableRow_hover>* { - background-image: linear-gradient(0deg, rgba(0, 102, 179, 0.1), - rgba(0, 102, 179, 0.1)); -} - -.ebTable.ebTable_highlightedEffect_solid tbody tr:not (.ebTable-expandableRow - ).ebTableRow_highlighted>* { - background-color: #ffffff !important; -} - -/* Context Menu */ -.ebContextMenu { - position: relative; - width: 16px; - height: 16px; -} - -.ebContextMenu:focus { - outline: none; -} - -.ebContextMenu-ExpandBtn, .ebContextMenu-expandBtn { - width: 16px; - height: 16px; - position: relative; - -khtml-user-select: none; - -moz-user-select: none; - -o-user-select: none; - -webkit-user-select: none; - user-select: none; -} - -.ebContextMenu-ExpandBtn:focus, .ebContextMenu-expandBtn:focus { - outline: none; -} - -.ebContextMenu-Dropdown, .ebContextMenu-body { - position: absolute; - z-index: 1500; - min-width: 60px; - width: auto; - height: auto; - white-space: nowrap; - overflow: hidden; - text-overflow: ellipsis; - -khtml-user-select: none; - -moz-user-select: none; - -o-user-select: none; - -webkit-user-select: none; - user-select: none; - box-shadow: 5px 5px 5px #87888A; -} - -.ebContextMenu-Dropdown_corner_default, - .ebContextMenu-body_corner_default { - position: absolute; - top: 20px; - left: 0px; -} - -.ebContextMenu-Dropdown_corner_topRight, - .ebContextMenu-body_corner_topRight { - position: absolute; - top: 20px; - right: 0px; -} - -.ebContextMenu-Dropdown_corner_bottomLeft, - .ebContextMenu-body_corner_bottomLeft { - position: absolute; - bottom: 20px; - left: 0px; -} - -.ebContextMenu-Dropdown_corner_bottomRight, - .ebContextMenu-body_corner_bottomRight { - position: absolute; - bottom: 20px; - right: 0px; -} - -.ebContextMenu-Dropdown_visible_false, .ebContextMenu-body_visible_false - { - visibility: hidden; -} - -.ebContextMenu-Dropdown_visible_true, .ebContextMenu-body_visible_true { - display: block; -} - -/* Component List */ -.ebComponentList { - position: relative; - z-index: 1500; - padding: 4px 0; - margin: 0; - color: #333333; - list-style: none; - background-color: #ffffff; - border: #bfbfbf solid 1px; - box-shadow: 0 0 5px 0 rgba(0, 0, 0, 0.2); - border-radius: 3px; - -moz-box-sizing: border-box; - box-sizing: border-box; -} - -.ebComponentList-group, .ebComponentList-item { - padding: 0 0.8rem; - line-height: 2.4rem; - font-size: 1.2rem; - background-color: #ffffff; -} - -.ebComponentList-iconHolder { - display: inline-block; - vertical-align: middle; - width: 16px; - padding-right: 8px; -} - -.ebComponentList-item { - cursor: pointer; -} - -.ebComponentList-item-name { - display: inline-block; - font-size: 12px; - text-overflow: ellipsis; - overflow: hidden; - width: calc(100% - 24px); - vertical-align: middle; -} - -.ebComponentList-item_icon { - font-size: 0; -} - -.ebComponentList-link, .ebComponentList-item, .ebComponentList-item>*, - .ebComponentList-group-header { - white-space: nowrap; - text-overflow: ellipsis; - overflow: hidden; -} - -.ebComponentList-group { - display: block; -} - -.ebComponentList-group_expandable_collapsed>.ebComponentList-group-header, - .ebComponentList-group_expandable_expanded>.ebComponentList-group-header - { - font-size: 0; - cursor: pointer; - white-space: nowrap; - height: 24px; - vertical-align: middle; -} - -.ebComponentList-group_expandable_collapsed>.ebComponentList-group-header .ebComponentList-iconHolder+.ebComponentList-group-name, - .ebComponentList-group_expandable_expanded>.ebComponentList-group-header .ebComponentList-iconHolder+.ebComponentList-group-name - { - width: calc(100% - 40px); -} - -.ebComponentList-group_expandable_collapsed>.ebComponentList-inner, - .ebComponentList-group_expandable_expanded>.ebComponentList-inner { - padding: 0 0 0 24px; - margin: 0 -0.8rem; -} - -.ebComponentList-group_expandable_collapsed>.ebComponentList-group-header - { - border: none; -} - -.ebComponentList-group_expandable_collapsed>.ebComponentList-inner .ebComponentList-item - { - overflow: hidden; - padding: 0; - margin: 0; - height: 0; - opacity: 0; - transition: height 0.2s linear, padding 0.075s 0.075s linear, margin - 0.075s 0.075s linear, opacity 0.075s linear; -} - -.ebComponentList-group_expandable_collapsed>.ebComponentList-inner .ebComponentList-group_expandable_collapsed .ebComponentList-group-header, - .ebComponentList-group_expandable_collapsed>.ebComponentList-inner .ebComponentList-group_expandable_expanded .ebComponentList-group-header - { - overflow: hidden; - padding: 0; - margin: 0; - height: 0; - opacity: 0; - transition: height 0.2s linear, padding 0.075s 0.075s linear, margin - 0.075s 0.075s linear, opacity 0.075s linear; -} - -.ebComponentList-group_expandable_collapsed>.ebComponentList-inner .ebComponentList-group>.ebComponentList-inner - { - padding: 0; - margin: 0; - transition: padding 0.1s 0.1s linear, margin 0.1s 0.1s linear; -} - -.ebComponentList-group_expandable_expanded>.ebComponentList-group-header - { - border-bottom: 1px solid #999; -} - -.ebComponentList-group_expandable_expanded>.ebComponentList-inner>.ebComponentList-item - { - overflow: hidden; - height: 24px; - transition: height 0.2s linear, padding 0.075s linear, margin 0.075s - linear, opacity 0.15s 0.15s linear; -} - -.ebComponentList-group_expandable_expanded>.ebComponentList-inner>.ebComponentList-group_expandable_expanded>.ebComponentList-group-header, - .ebComponentList-group_expandable_expanded>.ebComponentList-inner>.ebComponentList-group_expandable_collapsed>.ebComponentList-group-header - { - overflow: hidden; - height: 24px; - text-overflow: ellipsis; - transition: height 0.2s linear, padding 0.075s linear, margin 0.075s - linear, opacity 0.15s 0.15s linear; -} - -.ebComponentList-group:not (.ebComponentList-group_expandable_collapsed - ):not (.ebComponentList-group_expandable_expanded ) >.ebComponentList-group-header - { - cursor: default !important; - pointer-events: none !important; - -ms-touch-action: none !important; - touch-action: none !important; - -khtml-user-select: none !important; - -moz-user-select: none !important; - -o-user-select: none !important; - -webkit-user-select: none !important; - user-select: none; -} - -.ebComponentList-group-header { - font-size: 1.2rem; - font-weight: bold; - line-height: 2.4rem; - border-bottom: 1px solid #999; - background-color: #ffffff; -} - -.ebComponentList-group-header_icon { - font-size: 0; -} - -.ebComponentList-group-header_icon>.ebComponentList-group-name { - width: calc(100% - 24px); -} - -.ebComponentList-group-name { - display: inline-block; - width: calc(100% - 16px); - font-size: 1.2rem; - line-height: 2.4rem; - font-weight: bold; - text-overflow: ellipsis; - overflow: hidden; - white-space: nowrap; - vertical-align: middle; -} - -.ebComponentList-inner { - margin: 0 -0.8rem; - padding: 4px 0 0 0; -} - -.ebComponentList-link { - display: block; -} - -.ebComponentList-link:hover { - text-decoration: none; -} - -.ebComponentList-separator { - height: 1px; - margin: 0.4rem; - background-color: #E6E6E6; -} - -.ebComponentList_focus_forced .ebComponentList-item:hover { - background-color: transparent; -} - -.ebComponentList_focus_forced .ebComponentList-item_focused:hover { - background-color: #e6f0f7; -} - -.ebComponentList:not (.ebComponentList_focus_forced ) .ebComponentList-item:hover - { - background-color: #e6f0f7; -} - -.ebComponentList_focus_forced .ebComponentList-item:active, - .ebComponentList:not (.ebComponentList_focus_forced ) .ebComponentList-item:active - { - background-color: #cce0f0; -} - -.ebComponentList-item { - /* Fixes MultiSelectBox ellipsis bug in Firefox */ - margin: 0px !important; - font-size: 1em !important; -} - -.ebComponentList-item_focused { - background-color: #e6f0f7; -} - -.ebComponentList-item_disabled { - color: #b0b0af; - cursor: not-allowed !important; -} - -.ebComponentList-item_disabled:hover, .ebComponentList-item_disabled:active - { - background-color: inherit !important; -} - -.ebComponentList-item_selected { - position: relative; - cursor: default; -} - -.ebComponentList-item_selected>.ebComponentList-link { - cursor: default; - color: #333333; - cursor: default !important; - pointer-events: none !important; - -ms-touch-action: none !important; - touch-action: none !important; - -khtml-user-select: none !important; - -moz-user-select: none !important; - -o-user-select: none !important; - -webkit-user-select: none !important; - user-select: none; -} - -.ebComponentList-item_selected:before { - position: absolute; - content: ""; - left: 0; - top: 0; - bottom: 0; - width: 100%; - opacity: .2; - background-color: #0967b2; -} - -.ebComponentList-item>.ebComponentList-checkboxHolder>.ebCheckbox { - margin-left: 1px; -} - -.ebComponentList-item>.ebComponentList-checkboxHolder>.ebCheckbox-label - { - padding-left: 3px; - overflow: hidden; - font-size: 12px; - line-height: 2.4rem; - text-overflow: ellipsis; - width: calc(100% - 24px); -} - -.ebComponentList-info { - color: #333333; - font-style: italic; - text-align: center; -} - -.ebComponentList-info:hover { - background-color: #ffffff; -} - -.ebComponentList-info:active { - background-color: #ffffff; -} - -.ebComponentList-info, .ebComponentList-loader { - display: none; - margin: 0.6rem; - cursor: default; -} - -.ebComponentList_info .ebComponentList-group, .ebComponentList_info .ebComponentList-separator, - .ebComponentList_info .ebComponentList-item { - display: none; -} - -.ebComponentList_info .ebComponentList-info { - display: block; -} - -.ebComponentList_loading { - min-height: 34px; -} - -.ebComponentList_loading .ebComponentList-loader { - display: block; -} - -.ebComponentList_loading .ebComponentList-item_selected:before { - display: none; -} - -.ebComponentList_loading>.ebComponentList-group, - .ebComponentList_loading>.ebComponentList-item, - .ebComponentList_loading>.ebComponentList-items>.ebComponentList-group, - .ebComponentList_loading>.ebComponentList-items>.ebComponentList-item { - opacity: 0.4; -} - -/* Scrollbar */ -.eb_scrollbar { - -webkit-overflow-scrolling: touch; - overflow: auto; -} - -.eb_scrollbar::-webkit-scrollbar { - width: 14px; - height: 14px; -} - -.eb_scrollbar::-webkit-scrollbar-track { - background-color: #f0f0f0; - background-clip: content-box; -} - -.eb_scrollbar::-webkit-scrollbar-thumb { - background-color: #cccccc; - border-radius: 3px; - transition: all 0.2s linear; - background-clip: content-box; -} - -.eb_scrollbar::-webkit-scrollbar-thumb:hover { - background-color: #999999; -} - -.eb_scrollbar::-webkit-scrollbar-button { - width: 14px; - height: 14px; - background-repeat: no-repeat; - background-color: #f0f0f0; - background-position: center; -} - -.eb_scrollbar::-webkit-scrollbar-button:hover { - background-color: #cccccc; -} - -.eb_scrollbar::-webkit-scrollbar-button:vertical:decrement { - background-position: center 4px; - background-image: - url("data:image/svg+xml;utf8,"); - border-top-left-radius: 2px; - border-top-right-radius: 2px; -} - -.eb_scrollbar::-webkit-scrollbar-button:vertical:increment { - background-image: - url("data:image/svg+xml;utf8,"); - border-bottom-left-radius: 2px; - border-bottom-right-radius: 2px; -} - -.eb_scrollbar::-webkit-scrollbar-button:horizontal:decrement { - background-position: 4px center; - background-image: - url("data:image/svg+xml;utf8,"); - border-bottom-left-radius: 2px; - border-top-left-radius: 2px; -} - -.eb_scrollbar::-webkit-scrollbar-button:horizontal:increment { - background-image: - url("data:image/svg+xml;utf8,"); - border-bottom-right-radius: 2px; - border-top-right-radius: 2px; -} - -/* Input */ -.ebInput { - display: inline-block; - vertical-align: middle; - text-align: left; - font-size: 1.2rem; - width: 140px; - height: 2.4rem; - padding: 0.4rem 0.6rem; - border: 1px solid #b3b3b3; - -moz-box-sizing: border-box; - box-sizing: border-box; - border-radius: 3px; - box-shadow: inset 1px 1px 0 0 #cccccc; - -webkit-appearance: none; - -moz-appearance: none; - -ms-appearance: none; - appearance: none; -} - -.ebInput_wMargin { - margin: 6px; -} - -.ebInput_txtCenter { - text-align: center; -} - -.ebInput_miniW, .ebInput_width_mini { - width: 40px; -} - -.ebInput_smallW, .ebInput_width_small { - width: 80px; -} - -.ebInput_longW, .ebInput_width_long { - width: 180px; -} - -.ebInput_xLongW, .ebInput_width_xLong { - width: 220px; -} - -.ebInput_width_full { - min-width: 40px; - width: 100%; -} - -.ebInput_noRightSide { - border-width: 1px 0 1px 1px; - border-radius: 3px 0 0 3px; -} - -.ebInput_noLeftSide { - border-width: 1px 1px 1px 0; - border-radius: 0 3px 3px 0; - box-shadow: inset 0 1px 0 0 #cccccc; -} - -.ebInput:hover { - border-color: #666666; -} - -.ebInput[readonly] { - cursor: text; // - box-shadow: none; - border-color: #E3E3E3; - background-color: #f0f0f0; - color: #b2b2b2; -} - -.ebInput[readonly]:hover { // - border-color: #E3E3E3; -} - -.ebInput_disabled, .ebInput:disabled { - color: #B2B2B2; - border-color: #B2B2B2; - background-color: rgba(0, 0, 0, 0.05); - -webkit-text-fill-color: #b2b2b2; - opacity: 1; - -ms-touch-action: none !important; - touch-action: none !important; - box-shadow: inset 1px 1px 0 0 #cccccc; -} - -.ebInput_borderColor { - border-color: #b3b3b3; -} - -.ebInput_borderColor_red { - border-color: #e32119; -} - -.ebInput_status_none { - border-color: #b3b3b3; -} - -.ebInput_status_warning { - border-color: #f08a00; -} - -.ebInput_status_error { - border-color: #e32119; -} - -.ebInput.eb_wMargin+.ebInput-status { - margin: -0.2rem 0.8rem 0 0.6rem; -} - -.ebInput-status { - display: block; - margin: 0.4rem 0 0 0; - line-height: 1.2rem; - min-height: 1.8rem; - font-size: 1.2rem; - font-weight: normal; -} - -.ebInput-statusOk, .ebInput-statusError { - vertical-align: middle; -} - -.ebInput-statusOk:before, .ebInput-statusError:before { - display: inline-block; - vertical-align: middle; - margin: 0 0.6rem 0 0; - width: 1.2rem; - height: 1.2rem; - content: ''; - background-repeat: no-repeat; -} - -.ebInput-statusInfo { - vertical-align: middle; - color: #8d8d8d; -} - -.ebInput-statusOk { - color: #89ba17; - display: none; -} - -.ebInput-statusOk:before { - background-image: url('../resources/form/valid_icon.svg'); -} - -.ebInput-statusError { - color: #e32119; - display: none; -} - -.ebInput-statusError:before { - background-image: url('../resources/form/invalid_icon.svg'); -} - -.ebInput-status_none { - display: none; -} - -.ebInput-status_hide .ebInput-statusOk, .ebInput-status_hide .ebInput-statusError, - .ebInput-status_hide .ebInput-statusInfo { - display: none; -} - -.ebInput-status_info .ebInput-statusInfo { - display: inline-block; -} - -.ebInput-status_info .ebInput-statusOk, .ebInput-status_info .ebInput-statusError - { - display: none; -} - -.ebInput-status_ok .ebInput-statusOk { - display: inline-block; -} - -.ebInput-status_ok .ebInput-statusError, .ebInput-status_ok .ebInput-statusInfo - { - display: none; -} - -.ebInput-status_error .ebInput-statusError { - display: inline-block; -} - -.ebInput-status_error .ebInput-statusOk, .ebInput-status_error .ebInput-statusInfo - { - display: none; -} - -.ebInput:not (.ebInput_validation_focusLost ):valid+.ebInput-status:not - (.ebInput-status_hide ):not (.ebInput-status_info ):not (.ebInput-status_ok - ):not (.ebInput-status_error ) .ebInput-statusOk { - display: inline-block; -} - -.ebInput:not (.ebInput_validation_focusLost ):invalid:not (.ebInput_borderColor - ):not (.ebInput_status_warning ):not (.ebInput_status_none ) { - border-color: #e32119; -} - -.ebInput:not (.ebInput_validation_focusLost ):invalid+.ebInput-status:not - (.ebInput-status_hide ):not (.ebInput-status_info ):not (.ebInput-status_ok - ):not (.ebInput-status_error ) .ebInput-statusError { - display: inline-block; -} - -.ebInput:not (.ebInput_validation_focusLost ):invalid+.ebInput-status:not - (.ebInput-status_hide ):not (.ebInput-status_info ):not (.ebInput-status_ok - ):not (.ebInput-status_error ) .ebInput-statusInfo { - display: none; -} - -.ebInput.ebInput_validation_focusLost:not (:focus ):valid+.ebInput-status:not - (.ebInput-status_hide ):not (.ebInput-status_info ):not (.ebInput-status_ok - ):not (.ebInput-status_error ) .ebInput-statusOk { - display: inline-block; -} - -.ebInput.ebInput_validation_focusLost:not (:focus ):invalid:not (.ebInput_borderColor - ):not (.ebInput_status_warning ):not (.ebInput_status_none ) { - border-color: #e32119; -} - -.ebInput.ebInput_validation_focusLost:not (:focus ):invalid+.ebInput-status:not - (.ebInput-status_hide ):not (.ebInput-status_info ):not (.ebInput-status_ok - ):not (.ebInput-status_error ) .ebInput-statusError { - display: inline-block; -} - -.ebInput.ebInput_validation_focusLost:not (:focus ):invalid+.ebInput-status:not - (.ebInput-status_hide ):not (.ebInput-status_info ):not (.ebInput-status_ok - ):not (.ebInput-status_error ) .ebInput-statusInfo { - display: none; -} - -/* Textarea */ -.ebTextArea { - -webkit-overflow-scrolling: touch; - overflow: auto; - display: inline-block; - vertical-align: middle; - text-align: left; - font-size: 1.2rem; - width: 140px; - padding: 0.4rem 0.6rem; - margin: 0; - border: 1px solid #b3b3b3; - font-family: arial; - -moz-box-sizing: border-box; - box-sizing: border-box; - border-radius: 3px; - box-shadow: inset 1px 1px 0 0 #cccccc; - -webkit-appearance: none; - -moz-appearance: none; - -ms-appearance: none; - appearance: none; -} - -.ebTextArea::-webkit-scrollbar { - width: 14px; - height: 14px; -} - -.ebTextArea::-webkit-scrollbar-track { - background-color: #f0f0f0; - background-clip: content-box; -} - -.ebTextArea::-webkit-scrollbar-thumb { - background-color: #cccccc; - border-radius: 3px; - transition: all 0.2s linear; - background-clip: content-box; -} - -.ebTextArea::-webkit-scrollbar-thumb:hover { - background-color: #999999; -} - -.ebTextArea::-webkit-scrollbar-button { - width: 14px; - height: 14px; - background-repeat: no-repeat; - background-color: #f0f0f0; - background-position: center; -} - -.ebTextArea::-webkit-scrollbar-button:hover { - background-color: #cccccc; -} - -.ebTextArea::-webkit-scrollbar-button:vertical:decrement { - background-position: center 4px; - background-image: - url("data:image/svg+xml;utf8,"); - border-top-left-radius: 2px; - border-top-right-radius: 2px; -} - -.ebTextArea::-webkit-scrollbar-button:vertical:increment { - background-image: - url("data:image/svg+xml;utf8,"); - border-bottom-left-radius: 2px; - border-bottom-right-radius: 2px; -} - -.ebTextArea::-webkit-scrollbar-button:horizontal:decrement { - background-position: 4px center; - background-image: - url("data:image/svg+xml;utf8,"); - border-bottom-left-radius: 2px; - border-top-left-radius: 2px; -} - -.ebTextArea::-webkit-scrollbar-button:horizontal:increment { - background-image: - url("data:image/svg+xml;utf8,"); - border-bottom-right-radius: 2px; - border-top-right-radius: 2px; -} - -.ebTextArea_noMargin { - margin: 0; -} - -.ebTextArea_txtCenter { - text-align: center; -} - -.ebTextArea_miniW, .ebTextArea_width_mini { - width: 40px; -} - -.ebTextArea_smallW, .ebTextArea_width_small { - width: 80px; -} - -.ebTextArea_longW, .ebTextArea_width_long { - width: 180px; -} - -.ebTextArea_xLongW, .ebTextArea_width_xLong { - width: 220px; -} - -.ebTextArea_width_full { - min-width: 40px; - width: 100%; -} - -.ebTextArea_noRightSide { - border-width: 1px 0 1px 1px; - border-radius: 3px 0 0 3px; -} - -.ebTextArea_noLeftSide { - border-width: 1px 1px 1px 0; - border-radius: 0 3px 3px 0; -} - -.ebTextArea:hover { - border-color: #666666; -} - -.ebTextArea[readonly] { - cursor: text; - border-color: #E3E3E3; - background-color: #f0f0f0; - color: #b2b2b2; -} - -.ebTextArea[readonly]:hover { // - border-color: #E3E3E3; -} - -.ebTextArea_disabled, .ebTextArea:disabled { - color: #B2B2B2; - border-color: #B2B2B2; - background-color: rgba(0, 0, 0, 0.05); - -ms-touch-action: none; - touch-action: none; - -webkit-text-fill-color: #b2b2b2; - opacity: 1; - box-shadow: inset 1px 1px 0 0 #cccccc; -} - -.ebTextArea_status_none { - border-color: #b3b3b3; -} - -.ebTextArea_status_warning { - border-color: #f08a00; -} - -.ebTextArea_status_error { - border-color: #e32119; -} - -.ebTextArea:invalid:not (.ebTextArea_status_warning ):not (.ebTextArea_status_none - ) { - border-color: #e32119; -} - -/* Button */ -.ebBtn { - position: relative; - display: inline-block; - vertical-align: middle; - color: #333333; - background-color: #ffffff; - border: none; - min-width: 60px; - box-shadow: inset 0 0 0 1px rgba(0, 0, 0, 0.2); - border-radius: 3px; - -moz-box-sizing: border-box; - box-sizing: border-box; - background-image: linear-gradient(180deg, rgba(0, 0, 0, 0) 0%, - rgba(0, 0, 0, 0.1) 100%); - padding: 0 8px; - height: 2.4rem; - font-size: 1.2rem; - white-space: nowrap; - text-decoration: none; - text-align: center; - cursor: pointer; -} - -a.ebBtn:hover { - color: #333; -} - -a.ebBtn:focus, a.ebBtn:active, a.ebBtn_active { - text-decoration: none; -} - -.ebBtn:focus { - outline: none; - box-shadow: 0 0 2px 1px #4d90fe, 0 0 0 1px rgba(0, 0, 0, 0.2) inset; -} - -.ebBtn_color_blue, .ebBtn_color_darkBlue, .ebBtn_color_paleBlue, - .ebBtn_color_darkGreen, .ebBtn_color_green, .ebBtn_color_orange, - .ebBtn_color_red, .ebBtn_color_purple { - background-image: linear-gradient(180deg, rgba(0, 0, 0, 0) 0%, - rgba(0, 0, 0, 0.3) 100%); - color: #F0F0F0 !important; -} - -.ebBtn_color_blue:hover, .ebBtn_color_darkBlue:hover, - .ebBtn_color_paleBlue:hover, .ebBtn_color_darkGreen:hover, - .ebBtn_color_green:hover, .ebBtn_color_orange:hover, .ebBtn_color_red:hover, - .ebBtn_color_purple:hover { - background-image: linear-gradient(180deg, rgba(0, 0, 0, 0) 0%, - rgba(0, 0, 0, 0.1) 100%); -} - -.ebBtn_color_blue { - background-color: #0966b3; -} - -.ebBtn_color_darkBlue { - background-color: #0066b3; -} - -.ebBtn_color_paleBlue { - background-color: #00A9D4; -} - -.ebBtn_color_darkGreen { - background-color: #00625F; -} - -.ebBtn_color_green { - background-color: #89BA17; -} - -.ebBtn_color_orange { - background-color: #F08A00; -} - -.ebBtn_color_red { - background-color: #E32119; -} - -.ebBtn_color_purple { - background-color: #953882; -} - -.ebBtn_small { - font-size: 1.1rem; - padding: 0 6px; - height: 2rem; -} - -.ebBtn_large { - font-size: 1.4rem; - padding: 0 10px; - height: 3.8rem; -} - -.ebBtn:hover { - text-decoration: none; - background-image: linear-gradient(180deg, rgba(0, 0, 0, 0) 0%, - rgba(0, 0, 0, 0.15) 100%); -} - -.ebBtn_active, .ebBtn:active, .ebBtn_active:hover { - text-decoration: none; - box-shadow: inset 2px 2px 2.5px 0 rgba(0, 0, 0, 0.35), inset 0 0 0 1px - rgba(0, 0, 0, 0.2); - background-image: linear-gradient(180deg, rgba(0, 0, 0, 0.2) 0%, - rgba(0, 0, 0, 0.2) 100%); -} - -.ebBtn:disabled, .ebBtn_disabled, .ebBtn:disabled:hover, .ebBtn_disabled:hover, - .ebBtn:disabled:active, .ebBtn_disabled:active { - -ms-touch-action: none !important; - cursor: not-allowed !important; - touch-action: none !important; - background: rgba(0, 0, 0, 0.1); - color: #8d8d8d !important; -} - -.ebBtn:disabled .ebIcon, .ebBtn_disabled .ebIcon { - opacity: 0.3; -} - -.ebBtn_subtle { - background-image: none; - background-color: transparent; - box-shadow: none; - min-width: auto; -} - -.ebBtn_subtle:hover { - background-image: none; - box-shadow: inset 0 0 0 1px rgba(0, 0, 0, 0.2); -} - -.ebBtn_subtle:focus { - box-shadow: 0 0 2px 1px #4d90fe, 0 0 0 1px rgba(0, 0, 0, 0.2) inset; -} - -.ebBtn_subtle:active, .ebBtn_subtle.ebBtn_subtle_active { - text-decoration: none; - box-shadow: inset 2px 2px 2.5px 0 rgba(0, 0, 0, 0.35), inset 0 0 0 1px - rgba(0, 0, 0, 0.2); - background-image: linear-gradient(180deg, rgba(0, 0, 0, 0.2) 0%, - rgba(0, 0, 0, 0.2) 100%); -} - -.ebBtn_subtle:disabled, .ebBtn_subtle.ebBtn_subtle_disabled, - .ebBtn_subtle:disabled:hover, .ebBtn_subtle.ebBtn_subtle_disabled:hover, - .ebBtn_subtle:disabled:active, .ebBtn_subtle.ebBtn_subtle_disabled:active - { - background-color: transparent; - box-shadow: none; -} - -.ebBtn:active:focus, .ebBtn_active:focus { - box-shadow: inset 2px 2px 2.5px 0 rgba(0, 0, 0, 0.35), inset 0 0 0 1px - rgba(0, 0, 0, 0.2), 0 0 2px 1px #4d90fe; - background-image: linear-gradient(180deg, rgba(0, 0, 0, 0.2) 0%, - rgba(0, 0, 0, 0.2) 100%); -} - -/* Combobox */ -.ebCombobox { - position: relative; - display: inline-block; - vertical-align: middle; - white-space: nowrap; - margin: 0; - padding: 0; - height: 2.4rem; -} - -.ebCombobox_width_full { - min-width: 70px; - width: 100%; -} - -.ebCombobox_width_full .ebInput { - width: calc(100% - 30px); -} - -.ebCombobox-list, .ebCombobox-body { - position: absolute; - margin-top: 6px; - display: none; - width: 100%; -} - -.ebCombobox-list_rightAlign, .ebCombobox-body_rightAlign { - right: 0; -} - -.ebCombobox-Helper, .ebCombobox-helper { - position: relative; - display: inline-block; - vertical-align: middle; - width: 30px; - /*height: 100%; ewwatkmi: replaced with 2.4rem below*/ - height: 2.4rem; - cursor: pointer; - border: 1px solid #999999; - background-color: #ffffff; - -moz-box-sizing: border-box; - box-sizing: border-box; - border-radius: 0 3px 3px 0; - -webkit-appearance: none; - -moz-appearance: none; - -ms-appearance: none; - appearance: none; - background-image: linear-gradient(180deg, rgba(0, 0, 0, 0) 0%, - rgba(0, 0, 0, 0.1) 100%); -} - -.ebCombobox-Helper:hover, .ebCombobox-helper:hover { - background-image: linear-gradient(180deg, rgba(0, 0, 0, 0) 0%, - rgba(0, 0, 0, 0.15) 100%); -} - -.ebCombobox-Helper:active, .ebCombobox-helper:active { - box-shadow: inset 2px 2px 3px 0 rgba(0, 0, 0, 0.35); - background-image: linear-gradient(180deg, rgba(0, 0, 0, 0.2) 0%, - rgba(0, 0, 0, 0.2) 100%); -} - -.ebCombobox-Helper:disabled, .ebCombobox-helper:disabled { - border-color: #b2b2b2; -} - -.ebCombobox-Helper:disabled, .ebCombobox-helper:disabled, - .ebCombobox-Helper:disabled:hover, .ebCombobox-helper:disabled:hover, - .ebCombobox-Helper:disabled:active, .ebCombobox-helper:disabled:active - { - -ms-touch-action: none !important; - cursor: not-allowed !important; - touch-action: none !important; - background: #e5e5e5; - color: #B2B2B2; - cursor: not-allowed; - box-shadow: none; -} - -.ebCombobox-Helper .ebCombobox-iconHolder, .ebCombobox-helper .ebCombobox-iconHolder - { - display: inline-block; - opacity: 0.7; - cursor: pointer; - line-height: 2.2rem; -} - -.ebCombobox-Helper .ebCombobox-iconHolder .ebIcon, .ebCombobox-helper .ebCombobox-iconHolder .ebIcon - { - position: absolute; - top: 0; - bottom: 0; - left: 0; - right: 0; - margin: auto; -} - -.ebCombobox:hover>.ebCombobox-Helper, .ebCombobox:hover>.ebCombobox-helper - { - border-color: #666666; -} - -.ebCombobox - -.ebInput -:focus - -~ -.ebCombobox-list -, /*.ebCombobox .ebInput:focus ~ .ebCombobox-body,*/ -.ebCombobox -:active -> -.ebCombobox-list -, /*.ebCombobox:active > .ebCombobox-body*/ -{ -display -: - -block -; - - -} -.ebCombobox>.ebCombobox-list, .ebCombobox>.ebCombobox-body { - display: none; -} - -.ebCombobox_noMargin { - margin: 0; -} - -.ebCombobox_disabled, .ebCombobox_disabled *:hover { - -ms-touch-action: none !important; - cursor: not-allowed !important; - touch-action: none !important; -} - -.ebCombobox_disabled .ebCombobox-iconHolder, .ebCombobox_disabled .ebCombobox-iconHolder:hover, - .ebCombobox_disabled .ebCombobox-iconHolder:active { - -ms-touch-action: none !important; - cursor: not-allowed !important; - touch-action: none !important; - opacity: 0.3; -} - -.ebCombobox_disabled:hover>.ebCombobox-Helper, .ebCombobox_disabled:hover>.ebCombobox-helper - { - border-color: #b2b2b2; -} - -.ebCombobox_disabled:active>.ebCombobox-list, .ebCombobox_disabled:active>.ebCombobox-body - { - display: none; -} - -.ebCombobox_disabled .ebInput:focus ~ .ebCombobox-list, - .ebCombobox_disabled .ebInput:focus ~ .ebCombobox-body { - display: none; -} - -.ebCombobox_status_warning .ebInput { - border-color: #f08a00; -} - -.ebCombobox_status_error .ebInput { - border-color: #e32119; -} - -/* Switcher */ -.ebSwitcher { - position: relative; - height: 24px; - width: 84px; - display: block; - overflow: hidden; - cursor: pointer; - border: 1px solid #ccc; - border-radius: 3px; - -khtml-user-select: none; - -moz-user-select: none; - -o-user-select: none; - -webkit-user-select: none; - user-select: none; -} - -.ebSwitcher-checkbox { - display: none; -} - -.ebSwitcher-body { - position: relative; - font-size: 0; - white-space: nowrap; - top: 0; - left: 0; - width: 100%; - height: 100%; - transition: left 0.2s linear; -} - -.ebSwitcher-onLabel, .ebSwitcher-switch, .ebSwitcher-offLabel { - display: inline-block; - vertical-align: top; - overflow: hidden; - height: 100%; -} - -.ebSwitcher-onLabel, .ebSwitcher-offLabel { - width: calc(100% - 24px); - line-height: 2.4rem; - color: white; - text-align: center; - font-size: 1.2rem; -} - -.ebSwitcher-onLabel { - background-color: red; -} - -.ebSwitcher-onLabel2 { - background-color: #89ba17; -} - -.ebSwitcher-offLabel { - background-color: #89ba17; -} - -.ebSwitcher-offLabel2 { - background-color: red; -} - -.ebSwitcher-switch { - height: 24px; - width: 24px; - transition: left 0.2s; -} - -.ebSwitcher-switch::after { - content: ""; - position: absolute; - margin: -1px; - width: 24px; - height: 24px; - display: inline-block; - background: #ffffff; - background-image: linear-gradient(180deg, rgba(0, 0, 0, 0) 0%, - rgba(0, 0, 0, 0.1) 100%); - border-radius: 3px; - border: 1px solid rgba(0, 0, 0, 0.2); -} - -.ebSwitcher-checkbox:not (:checked ) +.ebSwitcher-body { - left: calc(-100% + 24px); -} - -.ebSwitcher:focus { - /* - outline: #4d90fe auto 5px; - box-shadow: 0 0 0 1px #4d90fe; - -webkit-box-shadow: none; - */ - outline: none; - box-shadow: 0 0 2px 1px #4d90fe; -} - -.ebSwitcher_status_warning { - border-color: #f08a00; -} - -.ebSwitcher_status_error { - border-color: #e32119; -} - -.ebSwitcher_disabled { - cursor: not-allowed; -} - -.ebSwitcher_disabled .ebSwitcher-onLabel, .ebSwitcher_disabled .ebSwitcher-offLabel, - .ebSwitcher_disabled .ebSwitcher-switch::after { - background-color: #e5e5e5; - background-image: none; - color: #8d8d8d; -} - -/* Dropdown */ -.ebDropdown { - position: relative; - display: inline-block; - height: 2.4rem; - padding: 0; - margin: 0; -} - -.ebDropdown-list, .ebDropdown-body { - position: absolute; - margin-top: 6px; - display: none; - min-width: 100%; -} - -.ebDropdown-list_rightAlign, .ebDropdown-body_rightAlign { - right: 0; -} - -.ebDropdown-Header, .ebDropdown-header { - position: relative; - display: inline-block; - vertical-align: middle; - height: 100%; - min-width: 60px; - margin: 0; - padding: 6px 8px; - line-height: 1.2rem; - font-size: 1.2rem; - text-align: left; - text-decoration: none; - white-space: nowrap; - color: #333333; - background-color: #ffffff; - border: none; - cursor: pointer; - box-shadow: inset 0 0 0 1px rgba(0, 0, 0, 0.2); - border-radius: 3px; - -moz-box-sizing: border-box; - box-sizing: border-box; - background-image: linear-gradient(180deg, rgba(0, 0, 0, 0) 0%, - rgba(0, 0, 0, 0.1) 100%); -} - -.ebDropdown-Header:hover, .ebDropdown-header:hover { - background-image: linear-gradient(180deg, rgba(0, 0, 0, 0) 0%, - rgba(0, 0, 0, 0.15) 100%); -} - -.ebDropdown-Header:active, .ebDropdown-header:active { - box-shadow: inset 2px 2px 2.5px 0 rgba(0, 0, 0, 0.35), inset 0 0 0 1px - rgba(0, 0, 0, 0.2); - background-image: linear-gradient(180deg, rgba(0, 0, 0, 0.2) 0%, - rgba(0, 0, 0, 0.2) 100%); -} - -.ebDropdown-Header .ebDropdown-caption, .ebDropdown-header .ebDropdown-caption - { - display: inline-block; - padding: 0 4px 0 0; - vertical-align: middle; - min-width: 27px; -} - -.ebDropdown-Header .ebDropdown-iconHolder, .ebDropdown-header .ebDropdown-iconHolder - { - display: inline-block; - cursor: pointer; - opacity: 0.7; -} - -.ebDropdown .ebDropdown-Header:focus+.ebDropdown-list, .ebDropdown .ebDropdown-header:focus+.ebDropdown-body, - .ebDropdown .ebDropdown-Header:active+.ebDropdown-list, .ebDropdown .ebDropdown-header:active+.ebDropdown-body, - .ebDropdown:focus>.ebDropdown-list, .ebDropdown:focus>.ebDropdown-body, - .ebDropdown:active>.ebDropdown-list, .ebDropdown:active>.ebDropdown-body - { - display: block; -} - -.ebDropdown_disabled .ebDropdown-Header, .ebDropdown_disabled .ebDropdown-header - { - background: rgba(0, 0, 0, 0.1); - color: #B2B2B2; -} - -.ebDropdown_disabled .ebDropdown-Header, .ebDropdown_disabled .ebDropdown-header, - .ebDropdown_disabled .ebDropdown-Header:hover, .ebDropdown_disabled .ebDropdown-header:hover, - .ebDropdown_disabled .ebDropdown-Header:active, .ebDropdown_disabled .ebDropdown-header:active - { - -ms-touch-action: none !important; - cursor: not-allowed !important; - touch-action: none !important; -} - -.ebDropdown_disabled .ebDropdown-Header:hover, .ebDropdown_disabled .ebDropdown-header:hover, - .ebDropdown_disabled .ebDropdown-Header:active, .ebDropdown_disabled .ebDropdown-header:active - { - background: rgba(0, 0, 0, 0.1); - color: #B2B2B2; - box-shadow: inset 0 0 0 1px rgba(0, 0, 0, 0.2); -} - -.ebDropdown_disabled .ebDropdown-Header .ebDropdown-iconHolder, - .ebDropdown_disabled .ebDropdown-header .ebDropdown-iconHolder, - .ebDropdown_disabled .ebDropdown-Header .ebDropdown-iconHolder:hover, - .ebDropdown_disabled .ebDropdown-header .ebDropdown-iconHolder:hover, - .ebDropdown_disabled .ebDropdown-Header .ebDropdown-iconHolder:active, - .ebDropdown_disabled .ebDropdown-header .ebDropdown-iconHolder:active { - -ms-touch-action: none !important; - cursor: not-allowed !important; - touch-action: none !important; - opacity: 0.3; -} - -.ebDropdown_disabled .ebDropdown-Header:focus+.ebDropdown-list, - .ebDropdown_disabled .ebDropdown-header:focus+.ebDropdown-body, - .ebDropdown_disabled .ebDropdown-Header:active+.ebDropdown-list, - .ebDropdown_disabled .ebDropdown-header:active+.ebDropdown-body, - .ebDropdown_disabled:focus>.ebDropdown-list, .ebDropdown_disabled:focus>.ebDropdown-body, - .ebDropdown_disabled:active>.ebDropdown-list, .ebDropdown_disabled:active>.ebDropdown-body - { - display: none; -} - -/* Icons */ -.ebIcon { - display: inline-block; - vertical-align: middle; - border: none; - height: 16px; - width: 16px; - line-height: 1.6rem; - background-repeat: no-repeat; - background-position: center; - background-color: transparent; - background-size: 100%; - -khtml-user-select: none; - -moz-user-select: none; - -o-user-select: none; - -webkit-user-select: none; - user-select: none; - /*small icons */ - /*16px icons*/ -} - -.ebIcon_interactive { - opacity: 0.7; - cursor: pointer; -} - -.ebIcon_interactive:hover { - opacity: 1.0; -} - -.ebIcon_interactive:active { - opacity: 0.4; -} - -.ebIcon_button { - margin: 10px; -} - -.ebIcon_noVertAlign { - vertical-align: inherit; -} - -.ebIcon_disabled { - cursor: default; -} - -.ebIcon_disabled, .ebIcon_disabled:hover, .ebIcon_disabled:active { - opacity: 0.3; -} - -.ebIcon_small { - width: 1rem; - height: 1rem; - line-height: 1rem; -} - -.ebIcon_big { - width: 2rem; - height: 2rem; - line-height: 2rem; -} - -.ebIcon_large { - width: 2.8rem; - height: 2.8rem; - line-height: 2.8rem; -} - -.ebIcon_wMargin { - margin: 4px; -} - -.ebIcon_upArrow { - background-image: url('../resources/16px/ArrowUpSmall_black_16px.svg'); -} - -.ebIcon_upArrow_white { - background-image: url('../resources/16px/arrowUpSmall_white_16px.svg'); -} - -.ebIcon_downArrow { - background-image: url('../resources/16px/ArrowDownSmall_black_16px.svg'); -} - -.ebIcon_downArrow_white { - background-image: url('../resources/16px/ArrowDownSmall_white_16px.svg'); -} - -.ebIcon_leftArrow { - background-image: url('../resources/16px/ArrowLeftSmall_black_16px.svg'); -} - -.ebIcon_leftArrow_white { - background-image: url('../resources/16px/ArrowLeftSmall_white_16px.svg'); -} - -.ebIcon_rightArrow { - background-image: - url('../resources/16px/ArrowRightSmall_black_16px.svg'); -} - -.ebIcon_rightArrow_white { - background-image: - url('../resources/16px/ArrowRightSmall_white_16px.svg'); -} - -.ebIcon_prevArrow { - background-image: - url('../resources/16px/ArrowDoubleLeftSmall_black_16px.svg'); -} - -.ebIcon_nextArrow { - background-image: - url('../resources/16px/ArrowDoubleRightSmall_black_16px.svg'); -} - -.ebIcon_upArrow_10px { - background-image: url('../resources/10px/ArrowUpSmall_black_10px.svg'); -} - -.ebIcon_downArrow_10px { - background-image: url('../resources/10px/ArrowDownSmall_black_10px.svg'); -} - -.ebIcon_leftArrow_10px { - background-image: url('../resources/10px/ArrowLeftSmall_black_10px.svg'); -} - -.ebIcon_rightArrow_10px { - background-image: - url('../resources/10px/ArrowRightSmall_black_10px.svg'); -} - -.ebIcon_prevArrow_10px { - background-image: - url('../resources/10px/ArrowDoubleLeftSmall_black_10px.svg'); -} - -.ebIcon_nextArrow_10px { - background-image: - url('../resources/10px/ArrowDoubleRightSmall_black_10px.svg'); -} - -.ebIcon_errorSmall { - background-image: url('../resources/other/errorSmall_red_10px.svg'); -} - -.ebIcon_tickSmallBlack { - background-image: url('../resources/other/tick_black_10x8px.svg'); -} - -.ebIcon_tickSmallGreen { - background-image: url('../resources/other/tick_green_10x8px.svg'); -} - -.ebIcon_upArrowLarge { - background-image: url('../resources/16px/ArrowUp_black_16px.svg'); -} - -.ebIcon_upArrowLarge_white { - background-image: url('../resources/16px/ArrowUp_white_16px.svg'); -} - -.ebIcon_downArrowLarge { - background-image: url('../resources/16px/ArrowDown_black_16px.svg'); -} - -.ebIcon_downArrowLarge_white { - background-image: url('../resources/16px/ArrowDown_white_16px.svg'); -} - -.ebIcon_downArrowLarge_blue { - background-image: url('../resources/16px/ArrowDown_blue_16px.svg'); -} - -.ebIcon_leftArrowLarge { - background-image: url('../resources/16px/ArrowLeft_black_16px.svg'); -} - -.ebIcon_leftArrowLarge_white { - background-image: url('../resources/16px/ArrowLeft_white_16px.svg'); -} - -.ebIcon_rightArrowLarge { - background-image: url('../resources/16px/ArrowRight_black_16px.svg'); -} - -.ebIcon_rightArrowLarge_white { - background-image: url('../resources/16px/ArrowRight_white_16px.svg'); -} - -.ebIcon_circleArrowDown { - background-image: - url('../resources/16px/circleArrowDown_black_16px.svg'); -} - -.ebIcon_circleArrowDown_white { - background-image: - url('../resources/16px/circleArrowDown_white_16px.svg'); -} - -.ebIcon_circleArrowLeft { - background-image: - url('../resources/16px/circleArrowLeft_black_16px.svg'); -} - -.ebIcon_circleArrowLeft_white { - background-image: - url('../resources/16px/circleArrowLeft_white_16px.svg'); -} - -.ebIcon_circleArrowRight { - background-image: - url('../resources/16px/circleArrowRight_black_16px.svg'); -} - -.ebIcon_circleArrowRight_white { - background-image: - url('../resources/16px/circleArrowRight_white_16px.svg'); -} - -.ebIcon_circleArrowUp { - background-image: url('../resources/16px/circleArrowUp_black_16px.svg'); -} - -.ebIcon_circleArrowUp_white { - background-image: url('../resources/16px/circleArrowUp_white_16px.svg'); -} - -.ebIcon_circleCaretDown { - background-image: - url('../resources/16px/circleCaretDown_black_16px.svg'); -} - -.ebIcon_circleCaretDown_white { - background-image: - url('../resources/16px/circleCaretDown_white_16px.svg'); -} - -.ebIcon_circleCaretLeft { - background-image: - url('../resources/16px/circleCaretLeft_black_16px.svg'); -} - -.ebIcon_circleCaretLeft_white { - background-image: - url('../resources/16px/circleCaretLeft_white_16px.svg'); -} - -.ebIcon_circleCaretRight { - background-image: - url('../resources/16px/circleCaretRight_black_16px.svg'); -} - -.ebIcon_circleCaretRight_white { - background-image: - url('../resources/16px/circleCaretRight_white_16px.svg'); -} - -.ebIcon_circleCaretUp { - background-image: url('../resources/16px/circleCaretUp_black_16px.svg'); -} - -.ebIcon_circleCaretUp_white { - background-image: url('../resources/16px/circleCaretUp_white_16px.svg'); -} - -.ebIcon_eLogo { - background-image: url('../resources/systemBar/econ01.svg'); -} - -.ebIcon_comment { - background-image: url('../resources/16px/Comment_black_16px.svg'); -} - -.ebIcon_comment_white { - background-image: url('../resources/16px/comment_white.svg'); -} - -.ebIcon_copy { - background-image: url('../resources/16px/copy_black_16px.svg'); -} - -.ebIcon_copy_white { - background-image: url('../resources/16px/copy_white_16px.svg'); -} - -.ebIcon_cut { - background-image: url('../resources/16px/cut_black.svg'); -} - -.ebIcon_cut_white { - background-image: url('../resources/16px/cut_white.svg'); -} - -.ebIcon_delete { - background-image: url('../resources/16px/delete_black_16px.svg'); -} - -.ebIcon_delete_white { - background-image: url('../resources/16px/delete_white_16px.svg'); -} - -.ebIcon_duplicate { - background-image: url('../resources/16px/duplicate_black_16px.svg'); -} - -.ebIcon_duplicate_white { - background-image: url('../resources/16px/duplicate_white_16px.svg'); -} - -.ebIcon_edit { - background-image: url('../resources/16px/edit_black_16px.svg'); -} - -.ebIcon_editWhite { - background-image: url('../resources/16px/edit_white_16px.svg'); -} - -.ebIcon_newFile { - background-image: url('../resources/16px/newFile_black_16px.svg'); -} - -.ebIcon_newFile_white { - background-image: url('../resources/16px/newFile_white_16px.svg'); -} - -.ebIcon_save { - background-image: url('../resources/16px/save_black_16px.svg'); -} - -.ebIcon_save_white { - background-size: contain; - background-image: url('../resources/16px/save_white.svg'); -} - -.ebIcon_filter { - background-image: url('../resources/16px/filter_black_16px.svg'); -} - -.ebIcon_filterOn { - background-image: url('../resources/16px/filters_on.svg'); -} - -.ebIcon_filterOff { - background-image: url('../resources/16px/filters_off.svg'); -} - -.ebIcon_filter_white { - background-image: url('../resources/16px/filter_white_16px.svg'); -} - -.ebIcon_folder { - background-image: url('../resources/16px/folder_black_16px.svg'); -} - -.ebIcon_folder_white { - background-image: url('../resources/16px/folder_white_16px.svg'); -} - -.ebIcon_folderClosed { - background-image: url('../resources/16px/folderClosed_black.svg'); -} - -.ebIcon_folderClosed_white { - background-image: url('../resources/16px/folderClosed_white.svg'); -} - -.ebIcon_detach { - background-image: url('../resources/16px/detach_black_16px.svg'); -} - -.ebIcon_detach_white { - background-size: contain; - background-image: url('../resources/16px/detach_white.svg'); -} - -.ebIcon_import { - background-image: url('../resources/16px/import_black.svg'); -} - -.ebIcon_import_white { - background-image: url('../resources/16px/import_white.svg'); -} - -.ebIcon_export { - background-image: url('../resources/16px/export_black_16px.svg'); -} - -.ebIcon_export_white { - background-image: url('../resources/16px/export_white.svg'); -} - -.ebIcon_undo { - background-image: url('../resources/16px/undo_black_16px.svg'); -} - -.ebIcon_undo_white { - background-image: url('../resources/16px/undo_white_16px.svg'); -} - -.ebIcon_cancelled { - background-image: url('../resources/16px/Cancelled_Black_16px.svg'); -} - -.ebIcon_draft { - background-size: contain; - background-image: url('../resources/16px/draft.svg'); -} - -.ebIcon_importExport { - background-image: url('../resources/16px/import_export.svg'); -} - -.ebIcon_login { - background-image: url('../resources/16px/login.svg'); -} - -.ebIcon_move { - background-image: url('../resources/16px/move.svg'); -} - -.ebIcon_remove { - background-image: url('../resources/16px/remove.svg'); -} - -.ebIcon_valid { - background-image: url('../resources/16px/valid_icon.svg'); -} - -.ebIcon_invalid { - background-image: url('../resources/16px/invalid_icon.svg'); -} - -.ebIcon_error { - background-image: url('../resources/16px/error_red_16px.svg'); -} - -.ebIcon_warning { - background-image: url('../resources/16px/warning_yellow_16px.svg'); -} - -.ebIcon_warningOrange { - background-image: url('../resources/16px/warning_orange_16px.svg'); -} - -.ebIcon_warning_white { - background-image: url('../resources/16px/warning_white.svg'); -} - -.ebIcon_warningShield { - background-image: url('../resources/16px/warningShield_black_16px.svg'); -} - -.ebIcon_warningShield_white { - background-size: contain; - background-image: url('../resources/16px/warningShield_white.svg'); -} - -.ebIcon_mail { - background-image: url('../resources/16px/mail_black_16px.svg'); -} - -.ebIcon_mail_white { - background-image: url('../resources/16px/mail_white_16px.svg'); -} - -.ebIcon_mailRead { - background-image: url('../resources/16px/mailRead_black_16px.svg'); -} - -.ebIcon_mailRead_white { - background-image: url('../resources/16px/mailRead_white_16px.svg'); -} - -.ebIcon_link { - background-image: url('../resources/16px/Link_black_16px.svg');; -} - -.ebIcon_lock { - background-image: url('../resources/16px/lock_black_16px.svg'); -} - -.ebIcon_lock_white { - background-image: url('../resources/16px/lock_white_16px.svg'); -} - -.ebIcon_unlock { - background-image: url('../resources/16px/unlock_black_16px.svg'); -} - -.ebIcon_unlock_white { - background-image: url('../resources/16px/unlock_white_16px.svg'); -} - -.ebIcon_logout { - background-image: url('../resources/16px/logout_black_16px.svg'); -} - -.ebIcon_menu { - background-image: url('../resources/16px/menu_black_16px.svg'); -} - -.ebIcon_menu_white { - background-image: url('../resources/16px/menu_white_16px.svg'); -} - -.ebIcon_search { - background-image: url('../resources/16px/search_black_16px.svg'); -} - -.ebIcon_searchWhite { - background-image: url('../resources/16px/search_white_16px.svg'); -} - -.ebIcon_advancedSearch { - background-image: - url('../resources/16px/advanced_search_black_16px.svg'); -} - -.ebIcon_advancedSearchWhite { - background-image: - url('../resources/16px/advanced_search_white_16px.svg'); -} - -.ebIcon_share { - background-image: url('../resources/16px/share_black_16px.svg'); -} - -.ebIcon_share_white { - background-image: url('../resources/16px/share_white.svg'); -} - -.ebIcon_star { - background-image: url('../resources/16px/star_black_16px.svg'); -} - -.ebIcon_star_white { - background-image: url('../resources/16px/star_white_16px.svg'); -} - -.ebIcon_star_yellow { - background-image: url('../resources/16px/star_yellow_16px.svg'); -} - -.ebIcon_starOutline { - background-image: url('../resources/16px/star_outline_black_16px.svg'); -} - -.ebIcon_starOutline_white { - background-image: url('../resources/16px/star_outline_white_16px.svg'); -} - -.ebIcon_starOutline_yellow { - background-image: url('../resources/16px/star_outline_yellow_16px.svg'); -} - -.ebIcon_tick { - background-image: url('../resources/16px/tick_green_16px.svg'); -} - -.ebIcon_tick_black { - background-image: url('../resources/16px/tick_16px.svg'); -} - -.ebIcon_simpleGreenTick { - background-image: url('../resources/16px/simple_green_tick.svg'); -} - -.ebIcon_simpleTick_black { - background-image: url('../resources/16px/simple_tick.svg'); -} - -.ebIcon_download { - background-image: url('../resources/16px/download_black.svg'); -} - -.ebIcon_download_white { - background-image: url('../resources/16px/download_white.svg'); -} - -.ebIcon_downloadWhite { - background-image: url('../resources/16px/download_white_16px.svg'); -} - -.ebIcon_documentWhite { - background-image: url('../resources/16px/document_white_16px.svg'); -} - -.ebIcon_expand { - background-image: url('../resources/16px/expand_black_16px.svg'); -} - -.ebIcon_rowCollapsed { - background-image: url('../resources/16px/rowCollapsed_black_16px.svg'); -} - -.ebIcon_rowExpanded { - background-image: url('../resources/16px/rowExpanded_black_16px.svg'); -} - -.ebIcon_rowView { - background-image: url('../resources/16px/rowView_black_16px.svg'); -} - -.ebIcon_rowView_white { - background-image: url('../resources/16px/rowView_white.svg'); -} - -.ebIcon_externalApp { - background-image: url('../resources/16px/externalApp_black_16px.svg'); -} - -.ebIcon_externalApp_white { - background-image: url('../resources/16px/externalApp_white_16px.svg'); -} - -.ebIcon_fullscreen { - background-image: url('../resources/16px/fullscreen_black_16px.svg'); -} - -.ebIcon_fullscreenMinimize { - background-image: - url('../resources/16px/fullscreenMinimise_black_16px.svg'); -} - -.ebIcon_help { - background-image: url('../resources/16px/help_black_16px.svg'); -} - -.ebIcon_help_white { - background-image: url('../resources/16px/help_white.svg'); -} - -.ebIcon_info { - background-image: url('../resources/16px/info_black.svg'); -} - -.ebIcon_info_white { - background-image: url('../resources/16px/info_white.svg'); -} - -.ebIcon_dialogInfo { - background-image: url('../resources/16px/dialogInfo_blue.svg'); -} - -.ebIcon_dialogInfo_white { - background-image: url('../resources/16px/dialogInfo_white.svg'); -} - -.ebIcon_infoMsgIndicator { - background-image: url('../resources/16px/infoMsgIndicator_16px.svg'); -} - -.ebIcon_exitFullscreen { - background-image: - url('../resources/16px/minimiseFullscreen_black_16px.svg'); -} - -.ebIcon_refresh { - background-image: url('../resources/16px/refresh_black_16px.svg'); -} - -.ebIcon_refresh_white { - background-image: url('../resources/16px/refresh_white_16px.svg'); -} - -.ebIcon_settings { - background-image: url('../resources/16px/settings_black_16px.svg'); -} - -.ebIcon_settings_white { - background-image: url('../resources/16px/settings_white_16px.svg'); -} - -.ebIcon_user { - background-image: url('../resources/16px/user_black_16px.svg'); -} - -.ebIcon_user_white { - background-image: url('../resources/16px/user_white_16px.svg'); -} - -.ebIcon_close { - background-image: url('../resources/16px/X_black_16px.svg'); -} - -.ebIcon_close_white { - background-image: url('../resources/16px/close_white_16px.svg'); -} - -.ebIcon_close_blue { - background-image: url('../resources/16px/X_blue_16px.svg'); -} - -.ebIcon_close_paleBlue { - background-image: url('../resources/16px/X_paleBlue_16px.svg'); -} - -.ebIcon_close_green { - background-image: url('../resources/16px/X_green_16px.svg'); -} - -.ebIcon_close_orange { - background-image: url('../resources/16px/X_orange_16px.svg'); -} - -.ebIcon_close_red { - background-image: url('../resources/16px/X_red_16px.svg'); -} - -.ebIcon_close_yellow { - background-image: url('../resources/16px/X_yellow_16px.svg'); -} - -.ebIcon_minus { - background-image: url('../resources/16px/minus_black_16px.svg'); -} - -.ebIcon_plus { - background-image: url('../resources/16px/plus_black_16px.svg'); -} - -.ebIcon_add { - background-image: url('../resources/16px/add_black_16px.svg'); -} - -.ebIcon_add_white { - background-image: url('../resources/16px/add_white_16px.svg'); -} - -.ebIcon_multiSelect { - background-image: url('../resources/16px/multiSelect_black_16px.svg'); -} - -.ebIcon_multiSelect_white { - background-size: contain; - background-image: url('../resources/16px/multiSelect_white.svg'); -} - -.ebIcon_multiSort { - background-image: url('../resources/16px/multi-sort.svg'); -} - -.ebIcon_multiSort_white { - background-image: url('../resources/16px/multi-sort_white.svg'); -} - -.ebIcon_sort { - background-image: url('../resources/16px/sort.svg'); -} - -.ebIcon_sort_white { - background-image: url('../resources/16px/sort_white.svg'); -} - -.ebIcon_stop { - background-image: url('../resources/16px/stop_black_16px.svg'); -} - -.ebIcon_pause { - background-image: url('../resources/16px/pause_black_16px.svg'); -} - -.ebIcon_suspend { - background-image: url('../resources/16px/suspend_black_16px.svg'); -} - -.ebIcon_resume { - background-image: url('../resources/16px/resume_black_16px.svg'); -} - -.ebIcon_play { - background-image: url('../resources/16px/play_black_16px.svg'); -} - -.ebIcon_fastForward { - background-image: url('../resources/16px/fastForward_black_16px.svg'); -} - -.ebIcon_fastRewind { - background-image: url('../resources/16px/fastRewind_black_16px.svg'); -} - -.ebIcon_print { - background-image: url('../resources/16px/print_black_16px.svg'); -} - -.ebIcon_print_white { - background-image: url('../resources/16px/print_white_16px.svg'); -} - -.ebIcon_calendar { - background-image: url('../resources/16px/calendar_black_16px.svg'); -} - -.ebIcon_calendar_white { - background-image: url('../resources/16px/calendar_white_16px.svg'); -} - -.ebIcon_addToFolder { - background-image: url('../resources/16px/addToFolder_black.svg'); -} - -.ebIcon_addToFolder_white { - background-image: url('../resources/16px/addToFolder_white.svg'); -} - -.ebIcon_alarmCleared { - background-image: url('../resources/16px/alarmCleared_16px.svg'); -} - -.ebIcon_alarmCleared_white { - background-image: url('../resources/16px/alarmCleared_white_16px.svg'); -} - -.ebIcon_alarmCritical { - background-image: url('../resources/16px/alarmCritical_16px.svg'); -} - -.ebIcon_alarmCritical_white { - background-image: url('../resources/16px/alarmCritical_white_16px.svg'); -} - -.ebIcon_alarmHeartbeat { - background-image: url('../resources/16px/alarmHeartbeat_16px.svg'); -} - -.ebIcon_alarmIndeterminate { - background-image: url('../resources/16px/alarmIndeterminate_16px.svg'); -} - -.ebIcon_alarmIndeterminate_white { - background-image: - url('../resources/16px/alarmIndeterminate_white_16px.svg'); -} - -.ebIcon_alarmMajor { - background-image: url('../resources/16px/alarmMajor_16px.svg'); -} - -.ebIcon_alarmMajor_white { - background-image: url('../resources/16px/alarmMajor_white_16px.svg'); -} - -.ebIcon_alarmMinor { - background-image: url('../resources/16px/alarmMinor_16px.svg'); -} - -.ebIcon_alarmMinor_white { - background-image: url('../resources/16px/alarmMinor_white_16px.svg'); -} - -.ebIcon_alarmWarning { - background-image: url('../resources/16px/alarmWarning_16px.svg'); -} - -.ebIcon_alarmWarning_white { - background-image: url('../resources/16px/alarmWarning_white_16px.svg'); -} - -.ebIcon_alarmOtherGrouping { - background-image: url('../resources/16px/alarmOtherGrouping_16px.svg'); -} - -.ebIcon_alarmUnacknowledged { - background-image: url('../resources/16px/alarmUnacknowledged.svg'); -} - -.ebIcon_alarmUnacknowledged_white { - background-image: url('../resources/16px/alarmUnacknowledged_white.svg'); -} - -.ebIcon_alarmUnspecified { - background-image: url('../resources/16px/alarmUnspecified_16px.svg'); -} - -.ebIcon_acknowledgeAlarm { - background-image: url('../resources/16px/acknowledgeAlarm.svg'); -} - -.ebIcon_acknowledgeAlarm_white { - background-image: url('../resources/16px/acknowledgeAlarm_white.svg'); -} - -.ebIcon_clearAlarm { - background-image: url('../resources/16px/clearAlarm.svg'); -} - -.ebIcon_clearAlarm_white { - background-image: url('../resources/16px/clearAlarm_white.svg'); -} - -.ebIcon_bsc { - background-image: url('../resources/16px/BSC_black_16px.svg'); -} - -.ebIcon_bscYellow { - background-image: url('../resources/16px/BSC_Yellow_16px.svg'); -} - -.ebIcon_bscFunction { - background-image: url('../resources/16px/BSCFunction_black_16px.svg'); -} - -.ebIcon_bscFunctionYellow { - background-image: url('../resources/16px/BSCFunction_Yellow_16px.svg'); -} - -.ebIcon_cabinet { - background-image: url('../resources/16px/cabinet_black_16px.svg'); -} - -.ebIcon_cellGray { - background-image: url('../resources/16px/cell_gray_16px.svg'); -} - -.ebIcon_cellGreen { - background-image: url('../resources/16px/cell_green_16px.svg'); -} - -.ebIcon_cellRed { - background-image: url('../resources/16px/cell_red_16px.svg'); -} - -.ebIcon_cellAdjacent { - background-image: url('../resources/16px/cellAdjacent_16px.svg'); -} - -.ebIcon_cellExternal { - background-image: url('../resources/16px/cellExternal_16px.svg'); -} - -.ebIcon_charging { - background-image: url('../resources/16px/charging_black.svg'); -} - -.ebIcon_charging_white { - background-size: contain; - background-image: url('../resources/16px/charging_white.svg'); -} - -.ebIcon_connected { - background-image: url('../resources/16px/connected_black_16px.svg'); -} - -.ebIcon_disconnected { - background-image: url('../resources/16px/disconnected_black_16px.svg'); -} - -.ebIcon_connectionError { - background-image: - url('../resources/16px/connectionError_black_16px.svg'); -} - -.ebIcon_core { - background-image: url('../resources/16px/core_black_16px.svg'); -} - -.ebIcon_coreSubscriber { - background-image: url('../resources/16px/coreSubscriber_black_16px.svg'); -} - -.ebIcon_database { - background-image: url('../resources/16px/database_black_16px.svg'); -} - -.ebIcon_ftpServer { - background-image: url('../resources/16px/ftpServer_black_16px.svg'); -} - -.ebIcon_ftpServerFunction { - background-image: - url('../resources/16px/ftpServerFunction_black_16px.svg'); -} - -.ebIcon_gatewayFunction { - background-image: - url('../resources/16px/gatewayFunction_black_16px.svg'); -} - -.ebIcon_grabHandle { - background-image: url('../resources/16px/grabHandle_black_16px.svg'); -} - -.ebIcon_grabHandle_white { - background-size: contain; - background-image: url('../resources/16px/grabHandle_white.svg'); -} - -.ebIcon_managedFunction { - background-image: - url('../resources/16px/managedFunction_black_16px.svg'); -} - -.ebIcon_managedGroup { - background-image: url('../resources/16px/managedGroup_black_16px.svg'); -} - -.ebIcon_managementNode { - background-image: url('../resources/16px/managementNode_black_16px.svg'); -} - -.ebIcon_network { - background-image: url('../resources/16px/network_black_16px.svg'); -} - -.ebIcon_networkElement { - background-image: url('../resources/16px/networkElement_black_16px.svg'); -} - -.ebIcon_networkElement_white { - background-image: url('../resources/16px/networkElement_white_16px.svg'); -} - -.ebIcon_rbs { - background-image: url('../resources/16px/RBS_black_16px.svg'); -} - -.ebIcon_rbs_white { - background-image: url('../resources/16px/RBS_white_16px.svg'); -} - -.ebIcon_routeSwitch { - background-image: url('../resources/16px/routeSwitch.svg'); -} - -.ebIcon_rxi { - background-image: url('../resources/16px/rxi_black_16px.svg'); -} - -.ebIcon_switchFunction { - background-image: url('../resources/16px/switchFunction_black_16px.svg'); -} - -.ebIcon_technicianPresent { - background-image: url('../resources/16px/technicianPresent_16px.svg'); -} - -.ebIcon_terminal { - background-image: url('../resources/16px/terminal_black_16px.svg'); -} - -.ebIcon_topology { - background-image: url('../resources/16px/topology_black_16px.svg'); -} - -.ebIcon_access { - background-image: url('../resources/16px/access_black_16px.svg'); -} - -.ebIcon_access_white { - background-image: url('../resources/16px/access_white_16px.svg'); -} - -.ebIcon_accessSettings { - background-image: url('../resources/16px/accessSettings_black_16px.svg'); -} - -.ebIcon_accessSettings_white { - background-image: url('../resources/16px/accessSettings_white_16px.svg'); -} - -.ebIcon_alignCenter { - background-image: url('../resources/16px/alignCenter_black_16px.svg'); -} - -.ebIcon_alignCenter_white { - background-image: url('../resources/16px/alignCenter_white.svg'); -} - -.ebIcon_alignLeft { - background-image: url('../resources/16px/alignLeft_black_16px.svg'); -} - -.ebIcon_alignLeft_white { - background-image: url('../resources/16px/alignLeft_white.svg'); -} - -.ebIcon_alignRight { - background-image: url('../resources/16px/alignRight_black_16px.svg'); -} - -.ebIcon_alignRight_white { - background-image: url('../resources/16px/alignRight_white.svg'); -} - -.ebIcon_cli { - background-image: - url('../resources/16px/CommandLineInterface_black_16px.svg'); -} - -.ebIcon_cli_white { - background-image: - url('../resources/16px/CommandLineInterface_white_16px.svg'); -} - -.ebIcon_controllingNode { - background-image: url('../resources/16px/controllingNode.svg'); -} - -.ebIcon_grid3x3 { - background-image: url('../resources/16px/grid3X3_black_16px.svg'); -} - -.ebIcon_grid3x3_white { - background-image: url('../resources/16px/grid3x3_white.svg'); -} - -.ebIcon_grid4x4 { - background-image: url('../resources/16px/grid4X4_black_16px.svg'); -} - -.ebIcon_grid4x4_white { - background-image: url('../resources/16px/grid4x4_white.svg'); -} - -.ebIcon_gridView { - background-image: url('../resources/16px/gridView_black_16px.svg'); -} - -.ebIcon_gridView_white { - background-image: url('../resources/16px/gridView_white.svg'); -} - -.ebIcon_jumpTo { - background-image: url('../resources/16px/jumpTo_black_16px.svg'); -} - -.ebIcon_microwave { - background-image: url('../resources/16px/microwave.svg'); -} - -.ebIcon_mo { - background-image: url('../resources/16px/mo.svg'); -} - -.ebIcon_security { - background-image: url('../resources/16px/security_black_16px.svg'); -} - -.ebIcon_security_white { - background-image: url('../resources/16px/security_white_16px.svg'); -} - -.ebIcon_site { - background-image: url('../resources/16px/site_black_16px.svg'); -} - -.ebIcon_siteManager { - background-image: url('../resources/16px/siteManager_black_16px.svg'); -} - -.ebIcon_subnetwork { - background-image: url('../resources/16px/subnetwork.svg'); -} - -.ebIcon_gateway, .ebIcon_switch { - background-image: url('../resources/16px/switch.svg'); -} - -.ebIcon_tip { - background-image: url('../resources/16px/tip_black_16px.svg'); -} - -.ebIcon_tip_white { - background-image: url('../resources/16px/tip_white_16px.svg'); -} - -.ebIcon_attach { - background-image: url('../resources/16px/attach_black_16px.svg'); -} - -.ebIcon_attach_white { - background-size: contain; - background-image: url('../resources/16px/attach_white.svg'); -} - -.ebIcon_clock { - background-image: url('../resources/16px/clock_black_16px.svg'); -} - -.ebIcon_clock_white { - background-image: url('../resources/16px/clock_white_16px.svg'); -} - -.ebIcon_windowMaximize { - background-image: url('../resources/16px/WindowMaximize_black_16px.svg'); -} - -.ebIcon_windowMinimize { - background-image: url('../resources/16px/WindowMinimize_black_16px.svg'); -} - -.ebIcon_deprecated { - background-image: url('../resources/16px/deprecated_16px.svg'); -} - -.ebIcon_obsolete { - background-image: url('../resources/16px/obsolete_16px.svg'); -} - -.ebIcon_newStatus_blue { - background-image: url('../resources/16px/newStatus_blue_16px.svg'); -} - -.ebIcon_newStatus_green { - background-image: url('../resources/16px/newStatus_green_16px.svg'); -} - -.ebIcon_upload { - background-image: url('../resources/16px/upload_black_16px.svg'); -} - -.ebIcon_activate { - background-image: url('../resources/16px/activate_black_16px.svg'); -} - -.ebIcon_activate_white { - background-size: contain; - background-image: url('../resources/16px/activate_white.svg'); -} - -.ebIcon_deactivate { - background-image: url('../resources/16px/deactivate_black_16px.svg'); -} - -.ebIcon_deactivate_white { - background-size: contain; - background-image: url('../resources/16px/deactivate_white.svg'); -} - -.ebIcon_switchBetween { - background-image: url('../resources/16px/switchBetween_black_16px.svg'); -} - -.ebIcon_switchBetween_white { - background-image: url('../resources/16px/switchBetween_white_16px.svg'); -} - -.ebIcon_eye { - background-image: url('../resources/16px/eye_black_16px.svg'); -} - -.ebIcon_eye_white { - background-image: url('../resources/16px/eye_white_16px.svg'); -} - -.ebIcon_eyeLine { - background-image: url('../resources/16px/eyeLine_black_16px.svg'); -} - -.ebIcon_eyeLine_white { - background-image: url('../resources/16px/eyeLine_white.svg'); -} - -.ebIcon_activityTray { - background-image: url('../resources/16px/activity_16px_black.svg'); -} - -.ebIcon_note { - background-image: url('../resources/16px/note_black_16px.svg'); - background-size: contain; -} - -.ebIcon_note_white { - background-image: url('../resources/16px/note_white_16px.svg'); -} - -.ebIcon_tableView { - background-image: url('../resources/16px/tableView_black_16px.svg'); -} - -.ebIcon_tableView_white { - background-image: url('../resources/16px/tableView_white_16px.svg'); -} - -.ebIcon_synced { - background-image: url('../resources/16px/Syncd_16px.svg'); -} - -.ebIcon_syncError { - background-image: url('../resources/16px/SyncError_16px.svg'); -} - -.ebIcon_syncing { - background-image: url('../resources/16px/Syncing_Static_16px.svg'); -} - -.ebIcon_syncing_animated { - background-image: url('../resources/16px/Syncing_Animated_16px.svg'); -} - -/* Breadcrumb */ -.ebBreadcrumbs { - position: relative; - display: block; - font-size: 0; - margin-top: 12px; - margin-bottom: 4px; -} - -.ebBreadcrumbs-link { - font-size: 1.2rem; - vertical-align: middle; - display: inline-block -} - -.ebBreadcrumbs-list { - position: absolute; - left: 0; - margin-top: 6px; - display: none; - min-width: calc(100% - 16px); - max-width: 250px; - z-index: 1500 -} - -.ebBreadcrumbs-arrow { - margin-left: .6rem; - vertical-align: middle; - outline: none; - display: inline-block; - line-height: 12px -} - -.ebBreadcrumbs-arrow:focus>* { - opacity: 1 -} - -.ebBreadcrumbs-arrow_hidden { - display: none -} - -.ebBreadcrumbs-arrow:focus+.ebBreadcrumbs-list { - display: block -} - -.ebBreadcrumbs-item { - position: relative; - font-size: 0; - white-space: nowrap; - display: inline-block; - margin-bottom: .8rem -} - -.ebBreadcrumbs-item:after { - vertical-align: middle; - display: inline-block; - width: 20px; - content: "/"; - font-size: 1.6rem; - text-align: center; - color: #999; - cursor: default !important; - pointer-events: none !important; - -ms-touch-action: none !important; - touch-action: none !important; - -khtml-user-select: none !important; - -moz-user-select: none !important; - -o-user-select: none !important; - -webkit-user-select: none !important; - user-select: none -} - -.ebBreadcrumbs-item:last-child { - margin-right: 0 -} - -.ebBreadcrumbs-item:last-child>.ebBreadcrumbs-link { - -ms-touch-action: none !important; - touch-action: none !important; - -khtml-user-select: none !important; - -moz-user-select: none !important; - -o-user-select: none !important; - -webkit-user-select: none !important; - user-select: none -} - -.ebBreadcrumbs-item:last-child:after { - content: ""; - padding: 0; - font-size: 0; - width: 0; -} - -.ebBreadcrumbs a { - font-size: 1.2rem; - color: #0066b3; - text-decoration: none; -} - -.ebBreadcrumbs a:hover { - text-decoration: underline; - outline: none; -} - -.ebBreadcrumbs a:active { - text-decoration: underline -} - -.ebBreadcrumbs a:focus { - outline: none; - text-decoration: underline; - box-shadow: none; -} \ No newline at end of file diff --git a/client/client-monitoring/src/main/resources/webapp/css/styles.css b/client/client-monitoring/src/main/resources/webapp/css/styles.css deleted file mode 100644 index fcb78fb43..000000000 --- a/client/client-monitoring/src/main/resources/webapp/css/styles.css +++ /dev/null @@ -1,441 +0,0 @@ -/* - * ============LICENSE_START======================================================= - * Copyright (C) 2016-2018 Ericsson. All rights reserved. - * ================================================================================ - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - * SPDX-License-Identifier: Apache-2.0 - * ============LICENSE_END========================================================= - */ -.ebSystemBar-config { - position: absolute; - top: 0; - bottom: 0; - right: 0; - height: 40px; - width: 20px; - padding: 0 10px; - background: url('../resources/16px/settings_black_16px.svg') no-repeat - center center transparent; - background-size: 20px; - cursor: pointer; -} - -.content { - display: none; - padding: 10px; -} - -.context { - margin-left: 5px; -} - -.wrapper { - border: 1px dashed #ddd; - box-shadow: 0 0 0 3px #fff, 0 0 0 5px #ddd, 0 0 0 10px #fff, 0 0 2px - 10px #eee; - padding: 10px; - margin: 10px; - min-width: 1287px; -} - -.wrapper_borderless { - margin-left: 5px; - min-width: 1287px; -} - -.engineService { - margin-left: 5px; - padding-bottom: 10px; -} - -.apexDialogDiv { - background-color: white; - position: fixed; - top: 50%; - left: 50%; - transform: translate(-50%, -50%); - min-width: 310px; - min-height: 140px; - resize: both; - overflow: auto; - padding: 10px 10px 10px 10px; - border: 1px solid #c0c0c0; - border-radius: 3px; - box-shadow: 3px 7px 5px #555555; -} - -.apexDialogDiv { - background-color: white; - position: fixed; - top: 50%; - left: 50%; - transform: translate(-50%, -50%); - min-width: 310px; - min-height: 140px; - resize: both; - overflow: auto; - padding: 10px 10px 10px 10px; - border: 1px solid #c0c0c0; - border-radius: 3px; - box-shadow: 3px 7px 5px #555555; -} - -.apexErrorDialogDiv { - max-width: 80%; - max-height: 80%; - overflow: hidden; -} - -/* Dialog */ -.apexDialogDiv .headingSpan { - width: 100%; - height: 30px; - display: inline-block; - text-align: center; - font-weight: bold; - font-size: 20px; - padding: 5px 0px 0px 0px; - border-bottom: #c0c0c0 solid 1px; -} - -.apexDialogDivBackground { - position: fixed; - height: 100%; - width: 100%; - background-color: rgba(0, 0, 0, 0.5); - top: 0px; - left: 0px; -} - -.dialogMessage { - white-space: pre-wrap; - font: 14px "Lucida Sans Unicode", "Lucida Grande", sans-serif; - overflow-y: auto; - max-height: 480px; - overflow-x: hidden; - word-wrap: break-word; -} - -/* Form */ -.resultFormDiv .form-style-1 .field-textarea { - height: 480px; - font-size: 15px; -} - -.form-style-1 { - margin: 10px auto; - font: 16px "Lucida Sans Unicode", "Lucida Grande", sans-serif; -} - -.form-style-1 li { - padding: 0; - display: block; - list-style: none; - margin: 10px 0 0 0; -} - -.form-style-1 label { - margin: 0 0 3px 0; - padding: 0px; - display: block; - font-weight: bold; -} - -.form-style-1 input[type=text], .form-style-1 input[type=date], - .form-style-1 input[type=datetime], .form-style-1 input[type=number], - .form-style-1 input[type=search], .form-style-1 input[type=time], - .form-style-1 input[type=url], .form-style-1 input[type=email], - textarea, select { - box-sizing: border-box; - -webkit-box-sizing: border-box; - -moz-box-sizing: border-box; - border: 1px solid #BEBEBE; - padding: 0px 7px; - margin: 0px; - -webkit-transition: all 0.30s ease-in-out; - -moz-transition: all 0.30s ease-in-out; - -ms-transition: all 0.30s ease-in-out; - -o-transition: all 0.30s ease-in-out; - outline: none; -} - -.form-style-1 input[type=text]:focus, .form-style-1 input[type=date]:focus, - .form-style-1 input[type=datetime]:focus, .form-style-1 input[type=number]:focus, - .form-style-1 input[type=search]:focus, .form-style-1 input[type=time]:focus, - .form-style-1 input[type=url]:focus, .form-style-1 input[type=email]:focus, - .form-style-1 textarea:focus, .form-style-1 select:focus { - -moz-box-shadow: 0 0 8px #88D5E9; - -webkit-box-shadow: 0 0 8px #88D5E9; - box-shadow: 0 0 8px #88D5E9; - border: 1px solid #88D5E9; -} - -.form-style-1 input:focus::-webkit-input-placeholder { - color: transparent; -} - -.form-style-1 input:focus:-moz-placeholder { - color: transparent; -} - -.form-style-1 .field { - font-size: 15px; -} - -.form-style-1 .field-divided { - width: 49%; - font-size: 15px; -} - -.form-style-1 .field-long { - width: 100%; - font-size: 15px; -} - -.form-style-1 .field-medium { - width: 50%; - font-size: 15px; -} - -.form-style-1 .field-select { - width: 100%; - font-size: 15px; -} - -.form-style-1 .field-textarea { - height: 100px; - font-size: 15px; -} - -.form-style-1 .field-javaType { - width: 100%; - font-size: 15px; -} - -.form-style-1 .field-schemaFlavour { - width: 100%; - font-size: 15px; -} - -.form-style-1 .field-taskSelLogic { - width: 100%; - font-size: 15px; - height: 300px; -} - -.form-style-1 .field-taskLogic { - width: 100%; - font-size: 15px; - height: 300px; -} - -.form-style-1 .field-finalizerLogic { - width: 100%; - font-size: 15px; - height: 300px; -} - -.form-style-1 .field-schemaDefinition { - width: 100%; - font-size: 15px; - height: 100px; -} - -.form-style-1 .required { - color: red; -} - -.form-style-1 .button { - font-size: 15px; -} - -.form-style-1 .delete_ex { - height: 30px; - width: 30px; - opacity: 1; - font-size: 30px; - line-height: 30px; - transition: all 0.8s; - border: 1px solid transparent; - text-align: center; -} - -.form-style-1 .delete_ex:hover { - border-radius: 50%; - background: tomato; - border: 1px solid black; -} - -.form-style-1 .delete_ex_disabled { - width: 0px; - opacity: 0; -} - -/* Icons */ -.expandIcon { - float: right; -} - -.ignoreConflictsLabel { - font-size: 1.4rem; - padding-right: 15px; -} - -#engineServicesTable_periodic_events { - align-items: center; - display: flex; - height: 30px; -} - -.modelLoading { - margin-left: 5px; - display: none; -} - -.layoutWrapper { - margin: 0 40px; -} - -.appHeading { - color: rgb(51, 51, 51); - display: block; - font-family: Arial, Helvetica, sans-serif; - font-size: 12px; - height: 32px; - line-height: 12px; - position: relative; -} - -.ebQuickActionBar { - margin-top: 1.2rem; - font-size: 0; - height: 32px; - padding: 0.4rem 0; - background-color: #e8e8e8; - position: relative; - width: 100%; - overflow: hidden; - line-height: 0; - box-sizing: border-box; - -webkit-transition: background-color 0.1s ease-in; - transition: background-color 0.1s ease-in; - -webkit-border-radius: 3px; - -moz-border-radius: 3px; - -ms-border-radius: 3px; - border-radius: 3px; -} - -.ebQuickActionBar_context { - background-color: #f3f3f3; - border-bottom: 2px solid #65cbe5; - box-sizing: border-box; - height: 32px; -} - -.ebQuickActionBar>* { - margin-left: 0.4rem; - margin-right: 0.4rem; - vertical-align: middle; -} - -.ebQuickActionBar-iconHolder { - display: inline-block; - vertical-align: middle; - height: 1.6rem; -} - -.ebQuickActionBar-separator { - display: inline-block; - vertical-align: middle; - border-left: 1px solid #CCCCCC; - margin: 0 8px; - height: 2.4rem; -} - -.ebQuickActionBar-Commands, .ebQuickActionBar-commands { - display: inline-block; - margin: 0; - font-size: 0; - line-height: 2.4rem; -} - -.ebQuickActionBar-Commands-iconHolder, - .ebQuickActionBar-commands-iconHolder { - display: inline-block; - vertical-align: middle; - height: 1.6rem; -} - -.ebQuickActionBar-Commands-separator, - .ebQuickActionBar-commands-separator { - display: inline-block; - vertical-align: middle; - border-left: 1px solid #CCCCCC; - margin: 0 8px; - height: 2.4rem; -} - -.ebQuickActionBar-Commands>*, .ebQuickActionBar-commands>* { - margin-left: 0.4rem; - margin-right: 0.4rem; - vertical-align: middle; -} - -.ebQuickActionBar-Commands-block, .ebQuickActionBar-commands-block, - .ebQuickActionBar-CommandsBlock, .ebQuickActionBar-commandsBlock { - margin: 0 0.8rem; - display: inline-block; -} - -.ebQuickActionBar-Commands-block>*, .ebQuickActionBar-commands-block>*, - .ebQuickActionBar-CommandsBlock>*, .ebQuickActionBar-commandsBlock>* { - margin-left: 0.4rem; - margin-right: 0.4rem; - vertical-align: middle; -} - -.ebQuickActionBar-Commands-block :last-child, - .ebQuickActionBar-commands-block :last-child, - .ebQuickActionBar-CommandsBlock :last-child, - .ebQuickActionBar-commandsBlock :last-child { - margin-right: 0; -} - -.title { - padding: 0px; -} - -.dataTd { - max-width: 1000px; - word-wrap: break-word; - white-space: normal !important; -} - -.dataTd_wordwrap { - max-width: 1000px; - word-wrap: break-word; - white-space: pre-wrap !important; -} - -.engineContextTitle { - padding: 1.2rem 0 .7rem 0; - font-weight: normal; -} - -.engineContextWrapper { - display: inline-block; - float: left; - padding-right: 10px; - padding-bottom: 10px; -} \ No newline at end of file diff --git a/client/client-monitoring/src/main/resources/webapp/index.html b/client/client-monitoring/src/main/resources/webapp/index.html index bd5ce0f70..8015f436b 100644 --- a/client/client-monitoring/src/main/resources/webapp/index.html +++ b/client/client-monitoring/src/main/resources/webapp/index.html @@ -22,7 +22,7 @@ -Apex Deployment and Monitoring +Apex Monitoring @@ -34,7 +34,6 @@ - @@ -81,7 +80,7 @@ - + diff --git a/client/client-monitoring/src/main/resources/webapp/js/ApexAjax.js b/client/client-monitoring/src/main/resources/webapp/js/ApexAjax.js index e62489fa2..beb2cb11d 100644 --- a/client/client-monitoring/src/main/resources/webapp/js/ApexAjax.js +++ b/client/client-monitoring/src/main/resources/webapp/js/ApexAjax.js @@ -22,68 +22,63 @@ * Send a GET request */ function ajax_get(requestURL, callback, hostName, port, params, errorCallback) { - var data = { - hostName : hostName, - port : port - }; - for ( var p in params) { - data[p] = params[p]; - } - return $ - .ajax({ - type : 'GET', - url : requestURL, - dataType : "json", - data : data, - success : function(data, textStatus, jqXHR) { - if (callback) { - callback(data); - } - }, - error : function(jqXHR, textStatus, errorThrown) { - if (jqXHR.status == 500 || jqXHR.status == 404) { - if (jqXHR.responseText - .indexOf("cound not handshake with server") !== -1 - || jqXHR.status == 404) { - clearEngineURL(); - getEngineURL(jqXHR.responseText); - } else { - apexErrorDialog_activate(document.body, - jqXHR.responseText); - } - } - if (errorCallback) { - errorCallback(jqXHR, textStatus, errorThrown); - } - } - }); + var data = { + hostName : hostName, + port : port + }; + for ( var p in params) { + data[p] = params[p]; + } + return $.ajax({ + type : 'GET', + url : requestURL, + dataType : "json", + data : data, + success : function(data, textStatus, jqXHR) { + if (callback) { + callback(data); + } + }, + error : function(jqXHR, textStatus, errorThrown) { + if (jqXHR.status == 500 || jqXHR.status == 404) { + if (jqXHR.responseText.indexOf("cound not handshake with server") !== -1 || jqXHR.status == 404) { + clearEngineURL(); + getEngineURL(jqXHR.responseText); + } else { + apexErrorDialog_activate(document.body, jqXHR.responseText); + } + } + if (errorCallback) { + errorCallback(jqXHR, textStatus, errorThrown); + } + } + }); } /* * Send a POST request and add a file to its payload */ -function ajax_upload(requestURL, callback, hostName, port, fileUrl, - ignoreConflicts, forceUpdate) { - var formData = new FormData(); - formData.append("hostName", hostName); - formData.append("port", port); - formData.append("file", fileUrl); - formData.append("ignoreConflicts", ignoreConflicts); - formData.append("forceUpdate", forceUpdate); - return $.ajax({ - url : requestURL, - type : "POST", - contentType : false, - dataType : "text", - processData : false, - data : formData, - success : function(data, textStatus, jqXHR) { - callback(data); - }, - error : function(jqXHR, textStatus, errorThrown) { - if (jqXHR.status == 500) { - apexErrorDialog_activate(document.body, jqXHR.responseText); - } - } - }); +function ajax_upload(requestURL, callback, hostName, port, fileUrl, ignoreConflicts, forceUpdate) { + var formData = new FormData(); + formData.append("hostName", hostName); + formData.append("port", port); + formData.append("file", fileUrl); + formData.append("ignoreConflicts", ignoreConflicts); + formData.append("forceUpdate", forceUpdate); + return $.ajax({ + url : requestURL, + type : "POST", + contentType : false, + dataType : "text", + processData : false, + data : formData, + success : function(data, textStatus, jqXHR) { + callback(data); + }, + error : function(jqXHR, textStatus, errorThrown) { + if (jqXHR.status == 500) { + apexErrorDialog_activate(document.body, jqXHR.responseText); + } + } + }); } diff --git a/client/client-monitoring/src/main/resources/webapp/js/ApexChart.js b/client/client-monitoring/src/main/resources/webapp/js/ApexChart.js index 438a3e5d9..7a288f5c1 100644 --- a/client/client-monitoring/src/main/resources/webapp/js/ApexChart.js +++ b/client/client-monitoring/src/main/resources/webapp/js/ApexChart.js @@ -22,112 +22,112 @@ * Create a chart and append it to a container */ function createChart(data, container, title, unit, lineStroke, nodeColour) { - // Set the dimensions of the canvas - var margin = { - top : 30, - right : 20, - bottom : 30, - left : 50 - }, width = 600 - margin.left - margin.right, height = 270 - margin.top - - margin.bottom; - - // Set the ranges - var x = d3.time.scale().range([ 0, width ]); - var y = d3.scale.linear().range([ height, 0 ]); - - // Define the axes - var xAxis = d3.svg.axis().scale(x).orient("bottom").ticks(5).innerTickSize( - -height).outerTickSize(0).tickPadding(10); - - var yAxis = d3.svg.axis().scale(y).orient("left").ticks(10).innerTickSize( - -width).outerTickSize(0).tickPadding(10); - - // Define the line - var valueline = d3.svg.line().x(function(d) { - return x(d.timestamp); - }).y(function(d) { - return y(d.value); - }); - - // Add the svg canvas to the container - var svg = d3.select(container).append("svg").attr("preserveAspectRatio", - "xMinYMin meet").attr("viewBox", "0 0 600 400").classed( - "svg-content-responsive", true).append("g").attr("transform", - "translate(" + margin.left + "," + margin.top + ")"); - - // Set the unit for the value - svg.attr("unit", unit); - - // Format the data for the chart - data.forEach(function(d) { - d.timestamp = d.timestamp; - d.value = +d.value; - }); - - // Scale the range of the data - x.domain(d3.extent(data, function(d) { - return d.timestamp; - })); - y.domain([ 0, d3.max(data, function(d) { - return Math.ceil((d.value + 1) / 10) * 10; - }) ]); - - // Set the colour of the line - if (!lineStroke) { - lineStroke = "#5fbadd" - } - - // Set the colour of the circles - if (!nodeColour) { - nodeColour = "#00A9D4" - } - - // Add the valueline path - svg.append("path").attr("class", "line").data(data).attr("unit", unit) - .attr("stroke", lineStroke).attr("d", valueline(data)); - - // Add the scatterplot - svg.selectAll("circle").data(data).enter().append("circle").attr("r", 3.5) - .attr("class", "circle").attr("fill", nodeColour).attr("cx", - function(d) { - return x(d.timestamp); - }).attr("cy", function(d) { - return y(d.value); - }) - - // Apply the tooltip to each node - .on( - "mouseover", - function(d) { - d3.select("body").select(".tooltip").transition() - .duration(50).style("opacity", 1); - d3.select("body").select(".tooltip").html( - formatDate(new Date(d.timestamp)) + "
" - + d.value + (unit ? " " + unit : "")) - .style("left", (d3.event.pageX) + "px").style( - "top", (d3.event.pageY - 28) + "px"); - }).on( - "mouseout", - function(d) { - d3.select("body").select(".tooltip").transition() - .duration(500).style("opacity", 0); - }); - - // Add the X Axis - svg.append("g").attr("class", "x axis").attr("transform", - "translate(0," + height + ")").call(xAxis); - - // Add the Y Axis - svg.append("g").attr("class", "y axis").call(yAxis); - - // Add the title - svg.append("text").attr("x", (width / 2)).attr("y", 0 - (margin.top / 2)) - .attr("text-anchor", "middle").style("font-size", "16px").style( - "text-decoration", "underline").text(title); - - // Add the background - svg.selectAll(".tick:not(:first-of-type) line").attr("stroke", "#777") - .attr("stroke-dasharray", "2,2"); + // Set the dimensions of the canvas + var margin = { + top : 30, + right : 20, + bottom : 30, + left : 50 + }, width = 600 - margin.left - margin.right, height = 270 - margin.top + - margin.bottom; + + // Set the ranges + var x = d3.time.scale().range([ 0, width ]); + var y = d3.scale.linear().range([ height, 0 ]); + + // Define the axes + var xAxis = d3.svg.axis().scale(x).orient("bottom").ticks(5).innerTickSize( + -height).outerTickSize(0).tickPadding(10); + + var yAxis = d3.svg.axis().scale(y).orient("left").ticks(10).innerTickSize( + -width).outerTickSize(0).tickPadding(10); + + // Define the line + var valueline = d3.svg.line().x(function(d) { + return x(d.timestamp); + }).y(function(d) { + return y(d.value); + }); + + // Add the svg canvas to the container + var svg = d3.select(container).append("svg").attr("preserveAspectRatio", + "xMinYMin meet").attr("viewBox", "0 0 600 400").classed( + "svg-content-responsive", true).append("g").attr("transform", + "translate(" + margin.left + "," + margin.top + ")"); + + // Set the unit for the value + svg.attr("unit", unit); + + // Format the data for the chart + data.forEach(function(d) { + d.timestamp = d.timestamp; + d.value = +d.value; + }); + + // Scale the range of the data + x.domain(d3.extent(data, function(d) { + return d.timestamp; + })); + y.domain([ 0, d3.max(data, function(d) { + return Math.ceil((d.value + 1) / 10) * 10; + }) ]); + + // Set the colour of the line + if (!lineStroke) { + lineStroke = "#5fbadd" + } + + // Set the colour of the circles + if (!nodeColour) { + nodeColour = "#00A9D4" + } + + // Add the valueline path + svg.append("path").attr("class", "line").data(data).attr("unit", unit) + .attr("stroke", lineStroke).attr("d", valueline(data)); + + // Add the scatterplot + svg.selectAll("circle").data(data).enter().append("circle").attr("r", 3.5) + .attr("class", "circle").attr("fill", nodeColour).attr("cx", + function(d) { + return x(d.timestamp); + }).attr("cy", function(d) { + return y(d.value); + }) + + // Apply the tooltip to each node + .on( + "mouseover", + function(d) { + d3.select("body").select(".tooltip").transition() + .duration(50).style("opacity", 1); + d3.select("body").select(".tooltip").html( + formatDate(new Date(d.timestamp)) + "
" + + d.value + (unit ? " " + unit : "")) + .style("left", (d3.event.pageX) + "px").style( + "top", (d3.event.pageY - 28) + "px"); + }).on( + "mouseout", + function(d) { + d3.select("body").select(".tooltip").transition() + .duration(500).style("opacity", 0); + }); + + // Add the X Axis + svg.append("g").attr("class", "x axis").attr("transform", + "translate(0," + height + ")").call(xAxis); + + // Add the Y Axis + svg.append("g").attr("class", "y axis").call(yAxis); + + // Add the title + svg.append("text").attr("x", (width / 2)).attr("y", 0 - (margin.top / 2)) + .attr("text-anchor", "middle").style("font-size", "16px").style( + "text-decoration", "underline").text(title); + + // Add the background + svg.selectAll(".tick:not(:first-of-type) line").attr("stroke", "#777") + .attr("stroke-dasharray", "2,2"); } /* @@ -135,108 +135,108 @@ function createChart(data, container, title, unit, lineStroke, nodeColour) { * are not empty on load */ function generateRandomData() { - var data = []; - for (var i = 0; i < 30; i++) { - data.push({ - timestamp : new Date().getTime() - (i * 5000), - value : Math.floor(Math.random() * 100) + 1 - }); - } - return data; + var data = []; + for (var i = 0; i < 30; i++) { + data.push({ + timestamp : new Date().getTime() - (i * 5000), + value : Math.floor(Math.random() * 100) + 1 + }); + } + return data; } /* * Update a chart belonging to a specific container */ function updateChart(container, data, nodeColour) { - var margin = { - top : 30, - right : 20, - bottom : 30, - left : 50 - }, width = 600 - margin.left - margin.right, height = 270 - margin.top - - margin.bottom; - var parseDate = d3.time.format("%d-%b-%y").parse; - - // Format the data for the chart - data.forEach(function(d) { - d.timestamp = d.timestamp; - d.value = +d.value; - }); - - // Select the chart - var svg = d3.select(container); - - // Set the ranges - var x = d3.time.scale().range([ 0, width ]); - var y = d3.scale.linear().range([ height, 0 ]); - - // Define the axes - var xAxis = d3.svg.axis().scale(x).orient("bottom").ticks(5).innerTickSize( - -height).outerTickSize(0).tickPadding(10); - - var yAxis = d3.svg.axis().scale(y).orient("left").ticks(10).innerTickSize( - -width).outerTickSize(0).tickPadding(10); - - // Scale the range of the data - x.domain(d3.extent(data, function(d) { - return d.timestamp; - })); - y.domain([ 0, d3.max(data, function(d) { - return Math.ceil((d.value + 1) / 10) * 10; - }) ]); - - // Update the valueline path - var valueline = d3.svg.line().x(function(d) { - return x(d.timestamp); - }).y(function(d) { - return y(d.value); - }); - - var unit = svg.select(".line").attr("unit"); - - // Remove all nodes - svg.selectAll("circle").remove(); - - // Set the node colour if one is passed in - if (!nodeColour) { - nodeColour = "#00A9D4" - } - - // Make the changes - svg.select(".line").data(data) // change the line - .transition().duration(750).attr("d", valueline(data)); - svg.select(".x.axis") // change the x axis - .transition().duration(750).call(xAxis.ticks(5)); - svg.select(".y.axis") // change the y axis - .transition().duration(750).call(yAxis); - - // Redraw the nodes based on the new data - svg.select("svg").select("g").selectAll("circle").data(data).enter() - .append("circle").attr("r", 3.5).attr("class", "circle").attr( - "fill", nodeColour).attr("cx", function(d) { - return x(d.timestamp); - }).attr("cy", function(d) { - return y(d.value); - }) - - // Apply the tooltip to each node - .on( - "mouseover", - function(d) { - d3.select("body").select(".tooltip").transition() - .duration(50).style("opacity", 1); - d3.select("body").select(".tooltip").html( - formatDate(new Date(d.timestamp)) + "
" - + d.value + (unit ? " " + unit : "")) - .style("left", (d3.event.pageX) + "px").style( - "top", (d3.event.pageY - 28) + "px"); - }).on( - "mouseout", - function(d) { - d3.select("body").select(".tooltip").transition() - .duration(500).style("opacity", 0); - }); + var margin = { + top : 30, + right : 20, + bottom : 30, + left : 50 + }, width = 600 - margin.left - margin.right, height = 270 - margin.top + - margin.bottom; + var parseDate = d3.time.format("%d-%b-%y").parse; + + // Format the data for the chart + data.forEach(function(d) { + d.timestamp = d.timestamp; + d.value = +d.value; + }); + + // Select the chart + var svg = d3.select(container); + + // Set the ranges + var x = d3.time.scale().range([ 0, width ]); + var y = d3.scale.linear().range([ height, 0 ]); + + // Define the axes + var xAxis = d3.svg.axis().scale(x).orient("bottom").ticks(5).innerTickSize( + -height).outerTickSize(0).tickPadding(10); + + var yAxis = d3.svg.axis().scale(y).orient("left").ticks(10).innerTickSize( + -width).outerTickSize(0).tickPadding(10); + + // Scale the range of the data + x.domain(d3.extent(data, function(d) { + return d.timestamp; + })); + y.domain([ 0, d3.max(data, function(d) { + return Math.ceil((d.value + 1) / 10) * 10; + }) ]); + + // Update the valueline path + var valueline = d3.svg.line().x(function(d) { + return x(d.timestamp); + }).y(function(d) { + return y(d.value); + }); + + var unit = svg.select(".line").attr("unit"); + + // Remove all nodes + svg.selectAll("circle").remove(); + + // Set the node colour if one is passed in + if (!nodeColour) { + nodeColour = "#00A9D4" + } + + // Make the changes + svg.select(".line").data(data) // change the line + .transition().duration(750).attr("d", valueline(data)); + svg.select(".x.axis") // change the x axis + .transition().duration(750).call(xAxis.ticks(5)); + svg.select(".y.axis") // change the y axis + .transition().duration(750).call(yAxis); + + // Redraw the nodes based on the new data + svg.select("svg").select("g").selectAll("circle").data(data).enter() + .append("circle").attr("r", 3.5).attr("class", "circle").attr( + "fill", nodeColour).attr("cx", function(d) { + return x(d.timestamp); + }).attr("cy", function(d) { + return y(d.value); + }) + + // Apply the tooltip to each node + .on( + "mouseover", + function(d) { + d3.select("body").select(".tooltip").transition() + .duration(50).style("opacity", 1); + d3.select("body").select(".tooltip").html( + formatDate(new Date(d.timestamp)) + "
" + + d.value + (unit ? " " + unit : "")) + .style("left", (d3.event.pageX) + "px").style( + "top", (d3.event.pageY - 28) + "px"); + }).on( + "mouseout", + function(d) { + d3.select("body").select(".tooltip").transition() + .duration(500).style("opacity", 0); + }); } @@ -244,13 +244,13 @@ function updateChart(container, data, nodeColour) { * Initialize a singleton div used as a floating tooltip for all charts */ function initTooltip() { - d3.select("body").append("div").attr("class", "tooltip").attr("id", - "tooltip").style("opacity", 0); + d3.select("body").append("div").attr("class", "tooltip").attr("id", + "tooltip").style("opacity", 0); } /* * Format a date object to string */ function formatDate(date) { - return date.toLocaleString().replace(',', ''); + return date.toLocaleString().replace(',', ''); } \ No newline at end of file diff --git a/client/client-monitoring/src/main/resources/webapp/js/ApexContext.js b/client/client-monitoring/src/main/resources/webapp/js/ApexContext.js index 437d8177d..8e249ac0b 100644 --- a/client/client-monitoring/src/main/resources/webapp/js/ApexContext.js +++ b/client/client-monitoring/src/main/resources/webapp/js/ApexContext.js @@ -22,73 +22,72 @@ * Create a Context Table */ function createEngineContextTable(wrapper) { - var tableId = config.engineContext.tableId; - var headers = config.engineContext.headers.map(function(a) { - return a.title; - }); - return createEngineTable($(wrapper), tableId, headers); + var tableId = config.engineContext.tableId; + var headers = config.engineContext.headers.map(function(a) { + return a.title; + }); + return createEngineTable($(wrapper), tableId, headers); } /* * Update each Context Table with the latest data */ function setEngineContextData(engineContextData) { - var tableId = config.engineContext.tableId; - for ( var ecd in engineContextData) { - var id = tableId + "_" + engineContextData[ecd].id; - var existingTable = undefined; - for ( var ect in this.engineContextTables) { - if (id === this.engineContextTables[ect].getAttribute("id")) { - existingTable = this.engineContextTables[ect]; - } - } - var engineInfo = JSON.parse(engineContextData[ecd].engine_info); - var contextAlbums = engineInfo.ContextAlbums; - var data = []; + var tableId = config.engineContext.tableId; + for ( var ecd in engineContextData) { + var id = tableId + "_" + engineContextData[ecd].id; + var existingTable = undefined; + for ( var ect in this.engineContextTables) { + if (id === this.engineContextTables[ect].getAttribute("id")) { + existingTable = this.engineContextTables[ect]; + } + } + var engineInfo = JSON.parse(engineContextData[ecd].engine_info); + var contextAlbums = engineInfo.ContextAlbums; + var data = []; - for ( var ca in contextAlbums) { - var cAlbumn = contextAlbums[ca]; - data.push([ cAlbumn.AlbumKey.name, cAlbumn.AlbumKey.version, - JSON.stringify(cAlbumn.AlbumContent, undefined, 50) ]); - } + for ( var ca in contextAlbums) { + var cAlbumn = contextAlbums[ca]; + data.push([ cAlbumn.AlbumKey.name, cAlbumn.AlbumKey.version, + JSON.stringify(cAlbumn.AlbumContent, undefined, 50) ]); + } - var table = existingTable; - // If no table already exists for the context, add one - if (!table) { - var wrapper = document.createElement("div"); - wrapper.setAttribute("class", "engineContextWrapper"); - var title = document.createElement("div"); - title.setAttribute("class", "engineContextTitle"); - title.innerHTML = engineContextData[ecd].id; - $(wrapper).append(title); - $("." + config.engineContext.parent).append(wrapper); - table = createEngineContextTable(wrapper); - table.setAttribute("id", id); - table.style["margin-bottom"] = "10px"; - this.engineContextTables.push(table); - } + var table = existingTable; + // If no table already exists for the context, add one + if (!table) { + var wrapper = document.createElement("div"); + wrapper.setAttribute("class", "engineContextWrapper"); + var title = document.createElement("div"); + title.setAttribute("class", "engineContextTitle"); + title.innerHTML = engineContextData[ecd].id; + $(wrapper).append(title); + $("." + config.engineContext.parent).append(wrapper); + table = createEngineContextTable(wrapper); + table.setAttribute("id", id); + table.style["margin-bottom"] = "10px"; + this.engineContextTables.push(table); + } - var old_data = $(table).data(tableId); - if (!deepCompare(old_data, data)) { - $(table).find("tbody").remove(); - var tbody = document.createElement("tbody"); + var old_data = $(table).data(tableId); + if (!deepCompare(old_data, data)) { + $(table).find("tbody").remove(); + var tbody = document.createElement("tbody"); - for ( var d in data) { - var rowData = data[d]; - var row = document.createElement("tr"); - var rowContent = ""; - for ( var rd in rowData) { - var tdClass = (rd == 2 ? "dataTd_wordwrap" : "dataTd"); - rowContent += "" + rowData[rd] - + ""; - } - rowContent += ""; - row.innerHTML = rowContent; - $(tbody).append(row); - } - $(table).data(tableId, data); - $(table).append(tbody); - } + for ( var d in data) { + var rowData = data[d]; + var row = document.createElement("tr"); + var rowContent = ""; + for ( var rd in rowData) { + var tdClass = (rd == 2 ? "dataTd_wordwrap" : "dataTd"); + rowContent += "" + rowData[rd] + ""; + } + rowContent += ""; + row.innerHTML = rowContent; + $(tbody).append(row); + } + $(table).data(tableId, data); + $(table).append(tbody); + } - } + } } \ No newline at end of file diff --git a/client/client-monitoring/src/main/resources/webapp/js/ApexEngineService.js b/client/client-monitoring/src/main/resources/webapp/js/ApexEngineService.js index 0573dd886..f47c98f07 100644 --- a/client/client-monitoring/src/main/resources/webapp/js/ApexEngineService.js +++ b/client/client-monitoring/src/main/resources/webapp/js/ApexEngineService.js @@ -22,43 +22,42 @@ * Create the Engine Service Table */ function createEngineServiceTable() { - var tableId = config.engineService.tableId; - var headers = config.engineService.headers; - var table = createEngineTable($("." + config.engineService.parent), - tableId, headers.map(function(a) { - return a.title; - })); - var tableRow = document.createElement("tr"); - var tableData = ""; - for ( var h in headers) { - tableData += ""; - } - tableRow.innerHTML = tableData; - var actionTD = $(tableRow).find("#" + tableId + "_periodic_events"); - actionTD - .html(''); - var period = actionTD.find("#period"); - var switcher = actionTD.find(".ebSwitcher"); - switcher.css('display', 'inline-block'); - switcher.css('margin-left', '5px'); - switcher.css('vertical-align', 'middle'); - var checkbox = $(actionTD).find('input:checkbox:first'); - checkbox.change(function(event) { - var startstop; - if (checkbox.prop('checked')) { - startstop = "Stop"; - } else { - startstop = "Start"; - } - this.servicesCall.abort(); - ajax_get(restRootURL + "periodiceventstartstop", startStopCallback, - this.engineURL.hostname, this.engineURL.port, { - engineId : this.engineId, - startstop : startstop, - period : period.val() - }, resetPeriodicEvents); - }.bind(this)); - $(table).children("#engineTableBody").append(tableRow); + var tableId = config.engineService.tableId; + var headers = config.engineService.headers; + var table = createEngineTable($("." + config.engineService.parent), tableId, headers.map(function(a) { + return a.title; + })); + var tableRow = document.createElement("tr"); + var tableData = ""; + for ( var h in headers) { + tableData += ""; + } + tableRow.innerHTML = tableData; + var actionTD = $(tableRow).find("#" + tableId + "_periodic_events"); + actionTD + .html(''); + var period = actionTD.find("#period"); + var switcher = actionTD.find(".ebSwitcher"); + switcher.css('display', 'inline-block'); + switcher.css('margin-left', '5px'); + switcher.css('vertical-align', 'middle'); + var checkbox = $(actionTD).find('input:checkbox:first'); + checkbox.change(function(event) { + var startstop; + if (checkbox.prop('checked')) { + startstop = "Stop"; + } else { + startstop = "Start"; + } + this.servicesCall.abort(); + ajax_get(restRootURL + "periodiceventstartstop", startStopCallback, this.engineURL.hostname, + this.engineURL.port, { + engineId : this.engineId, + startstop : startstop, + period : period.val() + }, resetPeriodicEvents); + }.bind(this)); + $(table).children("#engineTableBody").append(tableRow); } /* @@ -66,39 +65,37 @@ function createEngineServiceTable() { * necessary */ function setEngineServiceData(engineId, modelId, server, port, periodicEvents) { - this.engineId = engineId; - var tableId = config.engineService.tableId; - var headers = config.engineService.headers.map(function(a) { - return a.id; - }); - var data = [ engineId, server + ":" + port, modelId ]; + this.engineId = engineId; + var tableId = config.engineService.tableId; + var headers = config.engineService.headers.map(function(a) { + return a.id; + }); + var data = [ engineId, server + ":" + port, modelId ]; - var engineServiceTable = $("#engineServicesTable"); + var engineServiceTable = $("#engineServicesTable"); - for ( var h in headers) { - var td = engineServiceTable.find("#" + tableId + "_" + headers[h]); - if (td.html() !== data[h]) { - engineServiceTable.find("#" + tableId + "_" + headers[h]).html( - data[h]); - } - } + for ( var h in headers) { + var td = engineServiceTable.find("#" + tableId + "_" + headers[h]); + if (td.html() !== data[h]) { + engineServiceTable.find("#" + tableId + "_" + headers[h]).html(data[h]); + } + } - var actionTD = engineServiceTable.find("#" + tableId + "_periodic_events"); - var checkbox = $(actionTD).find('input:checkbox:first'); - if (checkbox.is(":checked") === periodicEvents) { - checkbox.prop("checked", !checkbox.prop("checked")); - } + var actionTD = engineServiceTable.find("#" + tableId + "_periodic_events"); + var checkbox = $(actionTD).find('input:checkbox:first'); + if (checkbox.is(":checked") === periodicEvents) { + checkbox.prop("checked", !checkbox.prop("checked")); + } } /* * Resets the switcher for Periodic Events in the Engine Service Table */ function resetPeriodicEvents() { - var engineServiceTable = $("#engineServicesTable"); - var periodicEventsTD = $(engineServiceTable).find( - "#engineServicesTable_periodic_events"); - var checkbox = $(periodicEventsTD).find('input:checkbox:first'); - if (checkbox.is(":checked")) { - checkbox.prop("checked", false); - } + var engineServiceTable = $("#engineServicesTable"); + var periodicEventsTD = $(engineServiceTable).find("#engineServicesTable_periodic_events"); + var checkbox = $(periodicEventsTD).find('input:checkbox:first'); + if (checkbox.is(":checked")) { + checkbox.prop("checked", false); + } } diff --git a/client/client-monitoring/src/main/resources/webapp/js/ApexEngineStatus.js b/client/client-monitoring/src/main/resources/webapp/js/ApexEngineStatus.js index 832a704f7..36a89dab0 100644 --- a/client/client-monitoring/src/main/resources/webapp/js/ApexEngineStatus.js +++ b/client/client-monitoring/src/main/resources/webapp/js/ApexEngineStatus.js @@ -22,73 +22,64 @@ * Create an Engine Status Table and its charts */ function createEngineStatusTable(id, startStopStatus) { - var tableId = config.engineStatus.tableId; - var headers = config.engineStatus.headers; + var tableId = config.engineStatus.tableId; + var headers = config.engineStatus.headers; - // Create a wrapper div for both the table and the charts - var wrapper = document.createElement("div"); - wrapper.setAttribute("id", id + "_wrapper"); - wrapper.setAttribute("class", "wrapper"); - $("." + config.engineStatus.parent).append(wrapper); + // Create a wrapper div for both the table and the charts + var wrapper = document.createElement("div"); + wrapper.setAttribute("id", id + "_wrapper"); + wrapper.setAttribute("class", "wrapper"); + $("." + config.engineStatus.parent).append(wrapper); - // Create the table - var table = createEngineTable($(wrapper), id, headers.map(function(a) { - return a.title; - })); - var tableRow = document.createElement("tr"); - var tableData = ""; - for ( var h in headers) { - tableData += ""; - } - tableRow.innerHTML = tableData; - var actionTD = $(tableRow).find("#" + tableId + "_action"); - var checked = (startStopStatus === "STOPPED") ? "checked" : ""; - var chartWrapper = document.createElement("div"); - chartWrapper.setAttribute("id", "chartWrapper"); - actionTD - .html(''); + // Create the table + var table = createEngineTable($(wrapper), id, headers.map(function(a) { + return a.title; + })); + var tableRow = document.createElement("tr"); + var tableData = ""; + for ( var h in headers) { + tableData += ""; + } + tableRow.innerHTML = tableData; + var actionTD = $(tableRow).find("#" + tableId + "_action"); + var checked = (startStopStatus === "STOPPED") ? "checked" : ""; + var chartWrapper = document.createElement("div"); + chartWrapper.setAttribute("id", "chartWrapper"); + actionTD + .html(''); - var checkbox = $(actionTD).find('input:checkbox:first'); - checkbox.change(function(event) { - var startstop; - if (checkbox.prop('checked')) { - startstop = "Stop"; - } else { - startstop = "Start"; - } - this.servicesCall.abort(); - ajax_get(restRootURL + "startstop", startStopCallback, - this.engineURL.hostname, this.engineURL.port, { - engineId : id.split("_")[1], - startstop : startstop - }); - }.bind(this)); + var checkbox = $(actionTD).find('input:checkbox:first'); + checkbox.change(function(event) { + var startstop; + if (checkbox.prop('checked')) { + startstop = "Stop"; + } else { + startstop = "Start"; + } + this.servicesCall.abort(); + ajax_get(restRootURL + "startstop", startStopCallback, this.engineURL.hostname, this.engineURL.port, { + engineId : id.split("_")[1], + startstop : startstop + }); + }.bind(this)); - $(table).children("#engineTableBody").append(tableRow); + $(table).children("#engineTableBody").append(tableRow); - var expand = document.createElement("i"); - expand - .setAttribute("class", - "ebIcon ebIcon_rowExpanded ebIcon_large ebIcon_interactive expandIcon"); - $(expand) - .click( - function() { - if ($(chartWrapper).is(":visible")) { - expand - .setAttribute("class", - "ebIcon ebIcon_rowCollapsed ebIcon_large ebIcon_interactive expandIcon"); - } else { - expand - .setAttribute("class", - "ebIcon ebIcon_rowExpanded ebIcon_large ebIcon_interactive expandIcon"); - } - $(chartWrapper).slideToggle(); - }.bind(this)); - $(wrapper).append(expand); - $(wrapper).append(chartWrapper); - return table; + var expand = document.createElement("i"); + expand.setAttribute("class", "ebIcon ebIcon_rowExpanded ebIcon_large ebIcon_interactive expandIcon"); + $(expand).click(function() { + if ($(chartWrapper).is(":visible")) { + expand.setAttribute("class", "ebIcon ebIcon_rowCollapsed ebIcon_large ebIcon_interactive expandIcon"); + } else { + expand.setAttribute("class", "ebIcon ebIcon_rowExpanded ebIcon_large ebIcon_interactive expandIcon"); + } + $(chartWrapper).slideToggle(); + }.bind(this)); + $(wrapper).append(expand); + $(wrapper).append(chartWrapper); + return table; } /* @@ -96,89 +87,81 @@ function createEngineStatusTable(id, startStopStatus) { * update only where necessary */ function setEngineStatusData(engineStatusData) { - var tableId = config.engineStatus.tableId; - var headers = config.engineStatus.headers.map(function(a) { - return a.id; - }); - for ( var esd in engineStatusData) { - var id = tableId + "_" + engineStatusData[esd].id; - var existingTable = undefined; - for ( var est in this.engineStatusTables) { - if (id === this.engineStatusTables[est].getAttribute("id")) { - existingTable = this.engineStatusTables[est]; - } - } + var tableId = config.engineStatus.tableId; + var headers = config.engineStatus.headers.map(function(a) { + return a.id; + }); + for ( var esd in engineStatusData) { + var id = tableId + "_" + engineStatusData[esd].id; + var existingTable = undefined; + for ( var est in this.engineStatusTables) { + if (id === this.engineStatusTables[est].getAttribute("id")) { + existingTable = this.engineStatusTables[est]; + } + } - var data = [ engineStatusData[esd].timestamp, id.split("_")[1], - engineStatusData[esd].status, - engineStatusData[esd].last_message, - engineStatusData[esd].up_time, - engineStatusData[esd].policy_executions ]; + var data = [ engineStatusData[esd].timestamp, id.split("_")[1], engineStatusData[esd].status, + engineStatusData[esd].last_message, engineStatusData[esd].up_time, + engineStatusData[esd].policy_executions ]; - var table = existingTable; - // If no table already exists for the engine, add one - if (!table) { - table = createEngineStatusTable(id, engineStatusData[esd].status); - table.setAttribute("id", id); - table.style["margin-bottom"] = "10px"; - table.style.display = "inline-block"; - this.engineStatusTables.push(table); - } + var table = existingTable; + // If no table already exists for the engine, add one + if (!table) { + table = createEngineStatusTable(id, engineStatusData[esd].status); + table.setAttribute("id", id); + table.style["margin-bottom"] = "10px"; + table.style.display = "inline-block"; + this.engineStatusTables.push(table); + } - // Update data in table - for ( var h in headers) { - var td = $(table).find("#" + tableId + "_" + headers[h]); - if (td.html() !== data[h]) { - $(table).find("#" + tableId + "_" + headers[h]).html(data[h]); - } - } + // Update data in table + for ( var h in headers) { + var td = $(table).find("#" + tableId + "_" + headers[h]); + if (td.html() !== data[h]) { + $(table).find("#" + tableId + "_" + headers[h]).html(data[h]); + } + } - var checked = (engineStatusData[esd].status === "STOPPED"); - var actionTD = $(table).find("#engineStatusTable_action"); - var checkbox = $(actionTD).find('input:checkbox:first'); - if (checkbox.is(":checked") !== checked) { - checkbox.prop("checked", !checkbox.prop("checked")); - } + var checked = (engineStatusData[esd].status === "STOPPED"); + var actionTD = $(table).find("#engineStatusTable_action"); + var checkbox = $(actionTD).find('input:checkbox:first'); + if (checkbox.is(":checked") !== checked) { + checkbox.prop("checked", !checkbox.prop("checked")); + } - // Update charts - var wrapper = $(table).parent(); - var chartWrapper = $(wrapper).find("#chartWrapper") + // Update charts + var wrapper = $(table).parent(); + var chartWrapper = $(wrapper).find("#chartWrapper") - var chartConfig = this.config.engineChart.lastPolicyDurationChart; - var lastPolicyDurationChart = wrapper.find("#" + chartConfig.parent)[0]; - if (lastPolicyDurationChart) { - updateChart(lastPolicyDurationChart, JSON - .parse(engineStatusData[esd].last_policy_duration), - chartConfig.nodeColour); - } else { - chartConfig = this.config.engineChart.lastPolicyDurationChart; - var lastPolicyDurationDiv = document.createElement("div"); - lastPolicyDurationDiv.setAttribute("id", chartConfig.parent); - lastPolicyDurationDiv.setAttribute("class", "apexChart"); - createChart(JSON.parse(engineStatusData[esd].last_policy_duration), - lastPolicyDurationDiv, chartConfig.title, chartConfig.unit, - chartConfig.lineStroke, chartConfig.nodeColour); - $(chartWrapper).append(lastPolicyDurationDiv); - } + var chartConfig = this.config.engineChart.lastPolicyDurationChart; + var lastPolicyDurationChart = wrapper.find("#" + chartConfig.parent)[0]; + if (lastPolicyDurationChart) { + updateChart(lastPolicyDurationChart, JSON.parse(engineStatusData[esd].last_policy_duration), + chartConfig.nodeColour); + } else { + chartConfig = this.config.engineChart.lastPolicyDurationChart; + var lastPolicyDurationDiv = document.createElement("div"); + lastPolicyDurationDiv.setAttribute("id", chartConfig.parent); + lastPolicyDurationDiv.setAttribute("class", "apexChart"); + createChart(JSON.parse(engineStatusData[esd].last_policy_duration), lastPolicyDurationDiv, + chartConfig.title, chartConfig.unit, chartConfig.lineStroke, chartConfig.nodeColour); + $(chartWrapper).append(lastPolicyDurationDiv); + } - chartConfig = this.config.engineChart.averagePolicyDurationChart; - var averagePolicyDurationChart = wrapper.find("#" + chartConfig.parent)[0]; - if (averagePolicyDurationChart) { - updateChart(averagePolicyDurationChart, JSON - .parse(engineStatusData[esd].average_policy_duration), - chartConfig.nodeColour); - } else { - chartConfig = this.config.engineChart.averagePolicyDurationChart; - var averagePolicyDurationDiv = document.createElement("div"); - averagePolicyDurationDiv.setAttribute("id", chartConfig.parent); - averagePolicyDurationDiv.setAttribute("class", "apexChart"); - createChart(JSON - .parse(engineStatusData[esd].average_policy_duration), - averagePolicyDurationDiv, chartConfig.title, - chartConfig.unit, chartConfig.lineStroke, - chartConfig.nodeColour); - $(chartWrapper).append(averagePolicyDurationDiv); - } + chartConfig = this.config.engineChart.averagePolicyDurationChart; + var averagePolicyDurationChart = wrapper.find("#" + chartConfig.parent)[0]; + if (averagePolicyDurationChart) { + updateChart(averagePolicyDurationChart, JSON.parse(engineStatusData[esd].average_policy_duration), + chartConfig.nodeColour); + } else { + chartConfig = this.config.engineChart.averagePolicyDurationChart; + var averagePolicyDurationDiv = document.createElement("div"); + averagePolicyDurationDiv.setAttribute("id", chartConfig.parent); + averagePolicyDurationDiv.setAttribute("class", "apexChart"); + createChart(JSON.parse(engineStatusData[esd].average_policy_duration), averagePolicyDurationDiv, + chartConfig.title, chartConfig.unit, chartConfig.lineStroke, chartConfig.nodeColour); + $(chartWrapper).append(averagePolicyDurationDiv); + } - } + } } \ No newline at end of file diff --git a/client/client-monitoring/src/main/resources/webapp/js/ApexEngineSummary.js b/client/client-monitoring/src/main/resources/webapp/js/ApexEngineSummary.js index 8b4051467..8f1e7c9b6 100644 --- a/client/client-monitoring/src/main/resources/webapp/js/ApexEngineSummary.js +++ b/client/client-monitoring/src/main/resources/webapp/js/ApexEngineSummary.js @@ -22,131 +22,125 @@ * Create the Engine Service Table */ function createEngineSummaryTable() { - var tableId = config.engineSummary.tableId; - var headers = config.engineSummary.headers; - - // Create a wrapper div for both the table and the charts - var wrapper = document.createElement("div"); - wrapper.setAttribute("id", "engineSummary_wrapper"); - wrapper.setAttribute("class", "wrapper_borderless"); - $("." + config.engineSummary.parent).append(wrapper); - - var table = createEngineTable($(wrapper), tableId, headers.map(function(a) { - return a.title; - })); - var tableRow = document.createElement("tr"); - var tableData = ""; - for ( var h in headers) { - tableData += ""; - } - tableRow.innerHTML = tableData; - - $(table).children("#engineTableBody").append(tableRow); + var tableId = config.engineSummary.tableId; + var headers = config.engineSummary.headers; + + // Create a wrapper div for both the table and the charts + var wrapper = document.createElement("div"); + wrapper.setAttribute("id", "engineSummary_wrapper"); + wrapper.setAttribute("class", "wrapper_borderless"); + $("." + config.engineSummary.parent).append(wrapper); + + var table = createEngineTable($(wrapper), tableId, headers.map(function(a) { + return a.title; + })); + var tableRow = document.createElement("tr"); + var tableData = ""; + for ( var h in headers) { + tableData += ""; + } + tableRow.innerHTML = tableData; + + $(table).children("#engineTableBody").append(tableRow); } function setEngineSummaryData(data) { - this._setEngineSummaryData(getLatestTimestamp(data), - getUptimeOfOldestEngine(data), getSumOfPolicyExecutions(data), - getAvgPolicyDuration(data)); + this._setEngineSummaryData(getLatestTimestamp(data), getUptimeOfOldestEngine(data), getSumOfPolicyExecutions(data), + getAvgPolicyDuration(data)); } /* * Check for any changes in the Engine Summary Table data and update only where * necessary */ -function _setEngineSummaryData(timestamp, upTime, policyExecutions, - avgPolicyDuration) { - - var tableId = config.engineSummary.tableId; - var headers = config.engineSummary.headers.map(function(a) { - return a.id; - }); - var data = [ timestamp, upTime, policyExecutions ]; - - var engineSummaryTable = $("#engineSummaryTable"); - - for ( var h in headers) { - var td = engineSummaryTable.find("#" + tableId + "_" + headers[h]); - if (td.html() !== data[h]) { - engineSummaryTable.find("#" + tableId + "_" + headers[h]).html( - data[h]); - } - } - - // Update charts - var wrapper = engineSummaryTable.parent(); - var chartConfig = this.config.engineSummary.chart.avgPolicyDurationChart; - var avgPolicyDurationChart = wrapper.find("#" + chartConfig.parent)[0]; - if (avgPolicyDurationChart) { - updateChart(avgPolicyDurationChart, avgPolicyDuration, - chartConfig.nodeColour); - } else { - var avgPolicyDurationDiv = document.createElement("div"); - avgPolicyDurationDiv.setAttribute("id", chartConfig.parent); - avgPolicyDurationDiv.setAttribute("class", "apexChart_inline"); - createChart(avgPolicyDuration, avgPolicyDurationDiv, chartConfig.title, - chartConfig.unit, chartConfig.lineStroke, - chartConfig.nodeColour); - $(wrapper).append(avgPolicyDurationDiv); - } +function _setEngineSummaryData(timestamp, upTime, policyExecutions, avgPolicyDuration) { + + var tableId = config.engineSummary.tableId; + var headers = config.engineSummary.headers.map(function(a) { + return a.id; + }); + var data = [ timestamp, upTime, policyExecutions ]; + + var engineSummaryTable = $("#engineSummaryTable"); + + for ( var h in headers) { + var td = engineSummaryTable.find("#" + tableId + "_" + headers[h]); + if (td.html() !== data[h]) { + engineSummaryTable.find("#" + tableId + "_" + headers[h]).html(data[h]); + } + } + + // Update charts + var wrapper = engineSummaryTable.parent(); + var chartConfig = this.config.engineSummary.chart.avgPolicyDurationChart; + var avgPolicyDurationChart = wrapper.find("#" + chartConfig.parent)[0]; + if (avgPolicyDurationChart) { + updateChart(avgPolicyDurationChart, avgPolicyDuration, chartConfig.nodeColour); + } else { + var avgPolicyDurationDiv = document.createElement("div"); + avgPolicyDurationDiv.setAttribute("id", chartConfig.parent); + avgPolicyDurationDiv.setAttribute("class", "apexChart_inline"); + createChart(avgPolicyDuration, avgPolicyDurationDiv, chartConfig.title, chartConfig.unit, + chartConfig.lineStroke, chartConfig.nodeColour); + $(wrapper).append(avgPolicyDurationDiv); + } } function getLatestTimestamp(data) { - var latestTimestamp = { - displayText : "-1", - value : -1 - }; - for ( var d in data) { - var currentDateInMillis = new Date(data[d].timestamp.replace(/-/g, '/') - .split('.')[0]).getTime(); - if (currentDateInMillis > latestTimestamp.value) { - latestTimestamp.displayText = data[d].timestamp; - latestTimestamp.value = currentDateInMillis; - } - } - return latestTimestamp.displayText; + var latestTimestamp = { + displayText : "-1", + value : -1 + }; + for ( var d in data) { + var currentDateInMillis = new Date(data[d].timestamp.replace(/-/g, '/').split('.')[0]).getTime(); + if (currentDateInMillis > latestTimestamp.value) { + latestTimestamp.displayText = data[d].timestamp; + latestTimestamp.value = currentDateInMillis; + } + } + return latestTimestamp.displayText; } function getUptimeOfOldestEngine(data) { - var oldestUpTime = -1; - for ( var d in data) { - if (data[d].up_time > oldestUpTime) { - oldestUpTime = data[d].up_time; - } - } - return oldestUpTime; + var oldestUpTime = -1; + for ( var d in data) { + if (data[d].up_time > oldestUpTime) { + oldestUpTime = data[d].up_time; + } + } + return oldestUpTime; } function getSumOfPolicyExecutions(data) { - var totalPolicyExecutions = 0; - for ( var d in data) { - totalPolicyExecutions += data[d].policy_executions; - } - return totalPolicyExecutions; + var totalPolicyExecutions = 0; + for ( var d in data) { + totalPolicyExecutions += data[d].policy_executions; + } + return totalPolicyExecutions; } function getAvgPolicyDuration(data) { - var chartData = []; - var avgPolicyDurations = []; - for ( var d in data) { - var avgPolicyDuration = JSON.parse(data[d].average_policy_duration); - avgPolicyDurations.push(avgPolicyDuration); - } - - if (avgPolicyDurations.length > 0) { - chartData = avgPolicyDurations[0]; - for (var i = 1; i < avgPolicyDurations.length; i++) { - var engineData = avgPolicyDurations[i]; - for ( var c in chartData) { - chartData[c].value += engineData[c].value; - } - } - } - - for ( var c2 in chartData) { - chartData[c2].value = Math.round(chartData[c2].value / data.length); - } - - return chartData; + var chartData = []; + var avgPolicyDurations = []; + for ( var d in data) { + var avgPolicyDuration = JSON.parse(data[d].average_policy_duration); + avgPolicyDurations.push(avgPolicyDuration); + } + + if (avgPolicyDurations.length > 0) { + chartData = avgPolicyDurations[0]; + for (var i = 1; i < avgPolicyDurations.length; i++) { + var engineData = avgPolicyDurations[i]; + for ( var c in chartData) { + chartData[c].value += engineData[c].value; + } + } + } + + for ( var c2 in chartData) { + chartData[c2].value = Math.round(chartData[c2].value / data.length); + } + + return chartData; } \ No newline at end of file diff --git a/client/client-monitoring/src/main/resources/webapp/js/ApexServicesMain.js b/client/client-monitoring/src/main/resources/webapp/js/ApexServicesMain.js index f22b3077c..eb7d4db90 100644 --- a/client/client-monitoring/src/main/resources/webapp/js/ApexServicesMain.js +++ b/client/client-monitoring/src/main/resources/webapp/js/ApexServicesMain.js @@ -22,162 +22,159 @@ var restRootURL; // Configuration used for page layout and charts var config = { - refresh : 5000, - engineService : { - parent : "engineService", - tableId : "engineServicesTable", - headers : [ { - title : "Engine Service ID", - id : "engine_id" - }, { - title : "server:port", - id : "server_port" - }, { - title : "Model ID", - id : "model_id" - }, { - title : "Periodic Events", - id : "periodic_events" - } ] - }, - engineSummary : { - parent : "engineSummary", - tableId : "engineSummaryTable", - headers : [ { - title : "Timestamp", - id : "timestamp" - }, { - title : "Up Time of oldest engine (ms)", - id : "up_time" - }, { - title : "Sum of policy executions", - id : "policy_executions" - } ], - chart : { - avgPolicyDurationChart : { - parent : "avgPolicyDuration", - title : "Average Policy Duration (ms)", - unit : "ms", - lineStroke : "#5FBADD", - nodeColour : "#00A9D4" - }, - } - }, - engineStatus : { - parent : "engineStatus", - tableId : "engineStatusTable", - headers : [ { - title : "Timestamp", - id : "timestamp" - }, { - title : "Engine ID", - id : "engine_id" - }, { - title : "Engine Status", - id : "engine_status" - }, { - title : "Last Message", - id : "last_message" - }, { - title : "Up Time (ms)", - id : "up_time" - }, { - title : "Policy Executions", - id : "policy_executions" - }, { - title : "Action", - id : "action" - } ] - }, - engineContext : { - parent : "context", - tableId : "engineContextTable", - headers : [ { - title : "Name", - id : "name" - }, { - title : "Version", - id : "version" - }, { - title : "Info", - id : "schema" - } ] - }, - engineChart : { - lastPolicyDurationChart : { - parent : "lastPolicyDurationChart", - title : "Last Policy Duration (ms)", - unit : "ms", - lineStroke : "#F5A241", - nodeColour : "#F08A00" - }, - averagePolicyDurationChart : { - parent : "averagePolicyDurationChart", - title : "Average Policy Duration (ms)", - unit : "ms", - lineStroke : "#00625F", - nodeColour : "#007B78" - } - } + refresh : 5000, + engineService : { + parent : "engineService", + tableId : "engineServicesTable", + headers : [ { + title : "Engine Service ID", + id : "engine_id" + }, { + title : "server:port", + id : "server_port" + }, { + title : "Model ID", + id : "model_id" + }, { + title : "Periodic Events", + id : "periodic_events" + } ] + }, + engineSummary : { + parent : "engineSummary", + tableId : "engineSummaryTable", + headers : [ { + title : "Timestamp", + id : "timestamp" + }, { + title : "Up Time of oldest engine (ms)", + id : "up_time" + }, { + title : "Sum of policy executions", + id : "policy_executions" + } ], + chart : { + avgPolicyDurationChart : { + parent : "avgPolicyDuration", + title : "Average Policy Duration (ms)", + unit : "ms", + lineStroke : "#5FBADD", + nodeColour : "#00A9D4" + }, + } + }, + engineStatus : { + parent : "engineStatus", + tableId : "engineStatusTable", + headers : [ { + title : "Timestamp", + id : "timestamp" + }, { + title : "Engine ID", + id : "engine_id" + }, { + title : "Engine Status", + id : "engine_status" + }, { + title : "Last Message", + id : "last_message" + }, { + title : "Up Time (ms)", + id : "up_time" + }, { + title : "Policy Executions", + id : "policy_executions" + }, { + title : "Action", + id : "action" + } ] + }, + engineContext : { + parent : "context", + tableId : "engineContextTable", + headers : [ { + title : "Name", + id : "name" + }, { + title : "Version", + id : "version" + }, { + title : "Info", + id : "schema" + } ] + }, + engineChart : { + lastPolicyDurationChart : { + parent : "lastPolicyDurationChart", + title : "Last Policy Duration (ms)", + unit : "ms", + lineStroke : "#F5A241", + nodeColour : "#F08A00" + }, + averagePolicyDurationChart : { + parent : "averagePolicyDurationChart", + title : "Average Policy Duration (ms)", + unit : "ms", + lineStroke : "#00625F", + nodeColour : "#007B78" + } + } }; function servicesCallback(data) { - // If engine url in cookie has not been cleared - if (localStorage.getItem("apex-monitor-services")) { - setEngineServiceData(data.engine_id, data.model_id, data.server, - data.port, data.periodic_events); - setEngineSummaryData(data.status); - setEngineStatusData(data.status); - setEngineContextData(data.context); - - // Make content visible after data has been returned for the first time - if (!$(".content").is(':visible')) { - $(".content").fadeIn(); - } - - // Repeat the same request - setTimeout(function() { - this.servicesCall = ajax_get(restRootURL, servicesCallback, - this.engineURL.hostname, this.engineURL.port); - }, config.refresh); - } + // If engine url in cookie has not been cleared + if (localStorage.getItem("apex-monitor-services")) { + setEngineServiceData(data.engine_id, data.model_id, data.server, data.port, data.periodic_events); + setEngineSummaryData(data.status); + setEngineStatusData(data.status); + setEngineContextData(data.context); + + // Make content visible after data has been returned for the first time + if (!$(".content").is(':visible')) { + $(".content").fadeIn(); + } + + // Repeat the same request + setTimeout(function() { + this.servicesCall = ajax_get(restRootURL, servicesCallback, this.engineURL.hostname, this.engineURL.port); + }, config.refresh); + } } /* * Callback for starting/stopping an engine/events */ function startStopCallback() { - this.servicesCall = ajax_get(restRootURL, servicesCallback, - this.engineURL.hostname, this.engineURL.port); + this.servicesCall = ajax_get(restRootURL, servicesCallback, this.engineURL.hostname, this.engineURL.port); } /* * Callback for uploading a model */ function uploadCallback(response) { - // Open a dialog showing the response - apexSuccessDialog_activate(document.body, response); + // Open a dialog showing the response + apexSuccessDialog_activate(document.body, response); } /* * Clears and resets all content on the page */ function setUpPage() { - // Hide all content - $('#content').hide(); + // Hide all content + $('#content').hide(); - // Clear each div - $('#content > div').each(function() { - $(this).empty(); - }); + // Clear each div + $('#content > div').each(function() { + $(this).empty(); + }); - // Reset trackers for tables - this.engineStatusTables = []; - this.engineContextTables = []; + // Reset trackers for tables + this.engineStatusTables = []; + this.engineContextTables = []; - // Set up content div's - createEngineServiceTable(); - createEngineSummaryTable(); + // Set up content div's + createEngineServiceTable(); + createEngineSummaryTable(); } /* @@ -185,69 +182,64 @@ function setUpPage() { * dialog is shown asking for it */ function getEngineURL(message) { - // The engine URL is stored in a cookie using the key - // "apex-monitor-services" - var engineURL = localStorage.getItem("apex-monitor-services"); - - // This url is used to store the last known engine URL so that the user - // doesn't have to retype it every time - var oldEngineURL = localStorage.getItem("apex-monitor-services_old"); - - // If an engine URL is stored in the cookie - if (engineURL) { - // Parse the engine URL - this.engineURL = JSON.parse(engineURL); - - // Send a request with that engine URL - this.servicesCall = ajax_get(restRootURL, servicesCallback, - this.engineURL.hostname, this.engineURL.port); - } else { - // Prompt for engine URL - apexDialogForm_activate(document.body, message); - } + // The engine URL is stored in a cookie using the key + // "apex-monitor-services" + var engineURL = localStorage.getItem("apex-monitor-services"); + + // This url is used to store the last known engine URL so that the user + // doesn't have to retype it every time + var oldEngineURL = localStorage.getItem("apex-monitor-services_old"); + + // If an engine URL is stored in the cookie + if (engineURL) { + // Parse the engine URL + this.engineURL = JSON.parse(engineURL); + + // Send a request with that engine URL + this.servicesCall = ajax_get(restRootURL, servicesCallback, this.engineURL.hostname, this.engineURL.port); + } else { + // Prompt for engine URL + apexDialogForm_activate(document.body, message); + } } /* * Clears the cookie and reset the page */ function clearEngineURL() { - // Remove engine URL from cookie - localStorage.removeItem("apex-monitor-services"); + // Remove engine URL from cookie + localStorage.removeItem("apex-monitor-services"); - // Reset the page - setUpPage(); + // Reset the page + setUpPage(); } /* * Called after the DOM is ready */ -$(document) - .ready( - function() { - restRootURL = location.protocol - + "//" - + window.location.hostname - + (location.port ? ':' + location.port : '') - + (location.pathname.endsWith("/monitoring/") ? location.pathname - .substring(0, location.pathname - .indexOf("monitoring/")) - : location.pathname) - + "apexservices/monitoring/"; - // Initialize tooltip for the charts - initTooltip(); - - // Set up the structure of the page - setUpPage(); - - // Check cookies for engine URL - getEngineURL(); - - // Add click event to config icon for clearing engine URL - $(".ebSystemBar-config").click(function() { - // Clear the engine URL - clearEngineURL(); - - // Request the engine URL - getEngineURL(); - }); - }); \ No newline at end of file +$(document).ready( + function() { + restRootURL = location.protocol + + "//" + + window.location.hostname + + (location.port ? ':' + location.port : '') + + (location.pathname.endsWith("/monitoring/") ? location.pathname.substring(0, location.pathname + .indexOf("monitoring/")) : location.pathname) + "apexservices/monitoring/"; + // Initialize tooltip for the charts + initTooltip(); + + // Set up the structure of the page + setUpPage(); + + // Check cookies for engine URL + getEngineURL(); + + // Add click event to config icon for clearing engine URL + $(".ebSystemBar-config").click(function() { + // Clear the engine URL + clearEngineURL(); + + // Request the engine URL + getEngineURL(); + }); + }); \ No newline at end of file diff --git a/client/client-monitoring/src/main/resources/webapp/js/ApexTable.js b/client/client-monitoring/src/main/resources/webapp/js/ApexTable.js index 95e9ec1f8..20e3d08bd 100644 --- a/client/client-monitoring/src/main/resources/webapp/js/ApexTable.js +++ b/client/client-monitoring/src/main/resources/webapp/js/ApexTable.js @@ -22,39 +22,38 @@ * Create a table with given headers */ function createEngineTable(parent, id, tableHeaders) { - var table = createTable(id); + var table = createTable(id); - var tableHead = document.createElement("thead"); - table.appendChild(tableHead); - tableHead.setAttribute("id", "engineTableHeader"); + var tableHead = document.createElement("thead"); + table.appendChild(tableHead); + tableHead.setAttribute("id", "engineTableHeader"); - var tableHeaderRow = document.createElement("tr"); - tableHead.appendChild(tableHeaderRow); - tableHeaderRow.setAttribute("id", "engineTableHeaderRow"); + var tableHeaderRow = document.createElement("tr"); + tableHead.appendChild(tableHeaderRow); + tableHeaderRow.setAttribute("id", "engineTableHeaderRow"); - for ( var t in tableHeaders) { - var tableHeader = document.createElement("th"); - tableHeaderRow.appendChild(tableHeader); - tableHeader.setAttribute("id", "engineTableHeader"); - tableHeader.appendChild(document.createTextNode(tableHeaders[t])); - } + for ( var t in tableHeaders) { + var tableHeader = document.createElement("th"); + tableHeaderRow.appendChild(tableHeader); + tableHeader.setAttribute("id", "engineTableHeader"); + tableHeader.appendChild(document.createTextNode(tableHeaders[t])); + } - var tableBody = document.createElement("tbody"); - tableBody.setAttribute("id", "engineTableBody"); - table.appendChild(tableBody); + var tableBody = document.createElement("tbody"); + tableBody.setAttribute("id", "engineTableBody"); + table.appendChild(tableBody); - parent.append(table); + parent.append(table); - return table; + return table; } /* * Create a table and apply UISDK styles to it */ function createTable(id) { - var table = document.createElement("table"); - table.setAttribute("id", id); - table.setAttribute("class", - "apexTable ebTable elTablelib-Table-table ebTable_striped"); - return table; + var table = document.createElement("table"); + table.setAttribute("id", id); + table.setAttribute("class", "apexTable ebTable elTablelib-Table-table ebTable_striped"); + return table; } \ No newline at end of file diff --git a/client/client-monitoring/src/main/resources/webapp/js/ApexUtils.js b/client/client-monitoring/src/main/resources/webapp/js/ApexUtils.js index 732fbfd25..b48c8cbd1 100644 --- a/client/client-monitoring/src/main/resources/webapp/js/ApexUtils.js +++ b/client/client-monitoring/src/main/resources/webapp/js/ApexUtils.js @@ -22,311 +22,304 @@ * Crate a dialog with input, attach it to a given parent and show an optional message */ function apexDialogForm_activate(formParent, message) { - apexUtils_removeElement("apexDialogDiv"); + apexUtils_removeElement("apexDialogDiv"); - var contentelement = document.createElement("apexDialogDiv"); - var formDiv = document.createElement("div"); - var backgroundDiv = document.createElement("div"); - backgroundDiv.setAttribute("id", "apexDialogDivBackground"); - backgroundDiv.setAttribute("class", "apexDialogDivBackground"); + var contentelement = document.createElement("apexDialogDiv"); + var formDiv = document.createElement("div"); + var backgroundDiv = document.createElement("div"); + backgroundDiv.setAttribute("id", "apexDialogDivBackground"); + backgroundDiv.setAttribute("class", "apexDialogDivBackground"); - backgroundDiv.appendChild(formDiv); - contentelement.appendChild(backgroundDiv); - formParent.appendChild(contentelement); + backgroundDiv.appendChild(formDiv); + contentelement.appendChild(backgroundDiv); + formParent.appendChild(contentelement); - formDiv.setAttribute("id", "apexDialogDiv"); - formDiv.setAttribute("class", "apexDialogDiv"); + formDiv.setAttribute("id", "apexDialogDiv"); + formDiv.setAttribute("class", "apexDialogDiv"); - var headingSpan = document.createElement("span"); - formDiv.appendChild(headingSpan); + var headingSpan = document.createElement("span"); + formDiv.appendChild(headingSpan); - headingSpan.setAttribute("class", "headingSpan"); - headingSpan.innerHTML = "Apex Engine Configuration"; + headingSpan.setAttribute("class", "headingSpan"); + headingSpan.innerHTML = "Apex Engine Configuration"; - var form = document.createElement("apexDialog"); - formDiv.appendChild(form); + var form = document.createElement("apexDialog"); + formDiv.appendChild(form); - form.setAttribute("id", "apexDialog"); - form.setAttribute("class", "form-style-1"); - form.setAttribute("method", "post"); + form.setAttribute("id", "apexDialog"); + form.setAttribute("class", "form-style-1"); + form.setAttribute("method", "post"); - if (message) { - var messageLI = document.createElement("li"); - messageLI.setAttribute("class", "dialogMessage"); - messageLI.innerHTML = message; - form.appendChild(messageLI); - } + if (message) { + var messageLI = document.createElement("li"); + messageLI.setAttribute("class", "dialogMessage"); + messageLI.innerHTML = message; + form.appendChild(messageLI); + } - var urlLI = document.createElement("li"); - form.appendChild(urlLI); + var urlLI = document.createElement("li"); + form.appendChild(urlLI); - var urlLabel = document.createElement("label"); - urlLI.appendChild(urlLabel); + var urlLabel = document.createElement("label"); + urlLI.appendChild(urlLabel); - urlLabel.setAttribute("for", "apexDialogUrlInput"); - urlLabel.innerHTML = "Apex Engine rest URL:"; + urlLabel.setAttribute("for", "apexDialogUrlInput"); + urlLabel.innerHTML = "Apex Engine rest URL:"; - var urlLabelSpan = document.createElement("span"); - urlLabel.appendChild(urlLabelSpan); + var urlLabelSpan = document.createElement("span"); + urlLabel.appendChild(urlLabelSpan); - urlLabelSpan.setAttribute("class", "required"); - urlLabelSpan.innerHTML = "*"; + urlLabelSpan.setAttribute("class", "required"); + urlLabelSpan.innerHTML = "*"; - var engineUrl = localStorage.getItem("apex-monitor-services_old"); + var engineUrl = localStorage.getItem("apex-monitor-services_old"); - var urlInput = document.createElement("input"); - urlInput.setAttribute("id", "services_url_input"); - urlInput.setAttribute("placeholder", "localhost:12345"); - urlInput.value = (engineUrl && engineUrl !== "null") ? JSON - .parse(engineUrl).hostname - + ":" + JSON.parse(engineUrl).port : ""; - urlLI.appendChild(urlInput); + var urlInput = document.createElement("input"); + urlInput.setAttribute("id", "services_url_input"); + urlInput.setAttribute("placeholder", "localhost:12345"); + urlInput.value = (engineUrl && engineUrl !== "null") ? JSON.parse(engineUrl).hostname + ":" + + JSON.parse(engineUrl).port : ""; + urlLI.appendChild(urlInput); - var inputLI = document.createElement("li"); - form.appendChild(inputLI); + var inputLI = document.createElement("li"); + form.appendChild(inputLI); - var submitInput = document.createElement("input"); - submitInput.setAttribute("id", "submit"); - submitInput.setAttribute("class", "button ebBtn"); - submitInput.setAttribute("type", "submit"); - submitInput.setAttribute("value", "Submit"); - submitInput.onclick = apexDialogForm_submitPressed; - inputLI.appendChild(submitInput); + var submitInput = document.createElement("input"); + submitInput.setAttribute("id", "submit"); + submitInput.setAttribute("class", "button ebBtn"); + submitInput.setAttribute("type", "submit"); + submitInput.setAttribute("value", "Submit"); + submitInput.onclick = apexDialogForm_submitPressed; + inputLI.appendChild(submitInput); - // Enter key press triggers submit - $(urlInput).keyup(function(event) { - if (event.keyCode == 13) { - $(submitInput).click(); - } - }); + // Enter key press triggers submit + $(urlInput).keyup(function(event) { + if (event.keyCode == 13) { + $(submitInput).click(); + } + }); - urlInput.focus(); + urlInput.focus(); } /* * Create a dialog for displaying text */ function apexTextDialog_activate(formParent, message, title) { - apexUtils_removeElement("apexDialogDiv"); - - var contentelement = document.createElement("div"); - contentelement.setAttribute("id", "apexDialogDiv") - var formDiv = document.createElement("div"); - var backgroundDiv = document.createElement("div"); - backgroundDiv.setAttribute("id", "apexDialogDivBackground"); - backgroundDiv.setAttribute("class", "apexDialogDivBackground"); - - backgroundDiv.appendChild(formDiv); - contentelement.appendChild(backgroundDiv); - formParent.appendChild(contentelement); - - formDiv.setAttribute("id", "apexErrorDialogDiv"); - formDiv.setAttribute("class", "apexDialogDiv apexErrorDialogDiv"); - - var headingSpan = document.createElement("span"); - formDiv.appendChild(headingSpan); - - headingSpan.setAttribute("class", "headingSpan"); - headingSpan.innerHTML = title; - - var form = document.createElement("div"); - formDiv.appendChild(form); - - form.setAttribute("id", "apexDialog"); - form.setAttribute("class", "form-style-1"); - form.setAttribute("method", "post"); - - if (message) { - var messageLI = document.createElement("li"); - messageLI.setAttribute("class", "dialogMessage"); - messageLI.innerHTML = message; - form.appendChild(messageLI); - } - - var inputLI = document.createElement("li"); - form.appendChild(inputLI); - - var cancelInput = document.createElement("input"); - cancelInput.setAttribute("class", "button ebBtn"); - cancelInput.setAttribute("type", "submit"); - cancelInput.setAttribute("value", "Close"); - cancelInput.onclick = newModelForm_cancelPressed; - form.appendChild(cancelInput); + apexUtils_removeElement("apexDialogDiv"); + + var contentelement = document.createElement("div"); + contentelement.setAttribute("id", "apexDialogDiv") + var formDiv = document.createElement("div"); + var backgroundDiv = document.createElement("div"); + backgroundDiv.setAttribute("id", "apexDialogDivBackground"); + backgroundDiv.setAttribute("class", "apexDialogDivBackground"); + + backgroundDiv.appendChild(formDiv); + contentelement.appendChild(backgroundDiv); + formParent.appendChild(contentelement); + + formDiv.setAttribute("id", "apexErrorDialogDiv"); + formDiv.setAttribute("class", "apexDialogDiv apexErrorDialogDiv"); + + var headingSpan = document.createElement("span"); + formDiv.appendChild(headingSpan); + + headingSpan.setAttribute("class", "headingSpan"); + headingSpan.innerHTML = title; + + var form = document.createElement("div"); + formDiv.appendChild(form); + + form.setAttribute("id", "apexDialog"); + form.setAttribute("class", "form-style-1"); + form.setAttribute("method", "post"); + + if (message) { + var messageLI = document.createElement("li"); + messageLI.setAttribute("class", "dialogMessage"); + messageLI.innerHTML = message; + form.appendChild(messageLI); + } + + var inputLI = document.createElement("li"); + form.appendChild(inputLI); + + var cancelInput = document.createElement("input"); + cancelInput.setAttribute("class", "button ebBtn"); + cancelInput.setAttribute("type", "submit"); + cancelInput.setAttribute("value", "Close"); + cancelInput.onclick = newModelForm_cancelPressed; + form.appendChild(cancelInput); } /* * Create a Success dialog */ function apexSuccessDialog_activate(formParent, message) { - apexTextDialog_activate(formParent, message, "Success"); + apexTextDialog_activate(formParent, message, "Success"); } /* * Create an Error dialog */ function apexErrorDialog_activate(formParent, message) { - apexTextDialog_activate(formParent, message, "Error"); + apexTextDialog_activate(formParent, message, "Error"); } /* * Dialog cancel callback */ function newModelForm_cancelPressed() { - apexUtils_removeElement("apexDialogDivBackground"); + apexUtils_removeElement("apexDialogDivBackground"); } /* * Dialog submit callback */ function apexDialogForm_submitPressed() { - var url = $('#services_url_input').val(); - if (url && url.length > 0) { - var engineConfig = { - hostname : url.split(":")[0], - port : url.split(":")[1] - }; - localStorage.setItem("apex-monitor-services_old", JSON - .stringify(engineConfig)); - localStorage.setItem("apex-monitor-services", JSON - .stringify(engineConfig)); - apexUtils_removeElement("apexDialogDivBackground"); - getEngineURL(); - } + var url = $('#services_url_input').val(); + if (url && url.length > 0) { + var engineConfig = { + hostname : url.split(":")[0], + port : url.split(":")[1] + }; + localStorage.setItem("apex-monitor-services_old", JSON.stringify(engineConfig)); + localStorage.setItem("apex-monitor-services", JSON.stringify(engineConfig)); + apexUtils_removeElement("apexDialogDivBackground"); + getEngineURL(); + } } /* * Remove an element from the page */ function apexUtils_removeElement(elementname) { - var element = document.getElementById(elementname); - if (element != null) { - element.parentNode.removeChild(element); - } + var element = document.getElementById(elementname); + if (element != null) { + element.parentNode.removeChild(element); + } } /* * Compare two objects */ function deepCompare() { - var i, l, leftChain, rightChain; - - function compare2Objects(x, y) { - var p; - - // remember that NaN === NaN returns false - // and isNaN(undefined) returns true - if (isNaN(x) && isNaN(y) && typeof x === 'number' - && typeof y === 'number') { - return true; - } - - // Compare primitives and functions. - // Check if both arguments link to the same object. - // Especially useful on the step where we compare prototypes - if (x === y) { - return true; - } - - // Works in case when functions are created in constructor. - // Comparing dates is a common scenario. Another built-ins? - // We can even handle functions passed across iframes - if ((typeof x === 'function' && typeof y === 'function') - || (x instanceof Date && y instanceof Date) - || (x instanceof RegExp && y instanceof RegExp) - || (x instanceof String && y instanceof String) - || (x instanceof Number && y instanceof Number)) { - return x.toString() === y.toString(); - } - - // At last checking prototypes as good as we can - if (!(x instanceof Object && y instanceof Object)) { - return false; - } - - if (x.isPrototypeOf(y) || y.isPrototypeOf(x)) { - return false; - } - - if (x.constructor !== y.constructor) { - return false; - } - - if (x.prototype !== y.prototype) { - return false; - } - - // Check for infinitive linking loops - if (leftChain.indexOf(x) > -1 || rightChain.indexOf(y) > -1) { - return false; - } - - // Quick checking of one object being a subset of another. - // todo: cache the structure of arguments[0] for performance - for (p in y) { - if (y.hasOwnProperty(p) !== x.hasOwnProperty(p)) { - return false; - } else if (typeof y[p] !== typeof x[p]) { - return false; - } - } - - for (p in x) { - if (y.hasOwnProperty(p) !== x.hasOwnProperty(p)) { - return false; - } else if (typeof y[p] !== typeof x[p]) { - return false; - } - - switch (typeof (x[p])) { - case 'object': - case 'function': - - leftChain.push(x); - rightChain.push(y); - - if (!compare2Objects(x[p], y[p])) { - return false; - } - - leftChain.pop(); - rightChain.pop(); - break; - - default: - if (x[p] !== y[p]) { - return false; - } - break; - } - } - - return true; - } - - if (arguments.length < 1) { - return true; - } - - for (i = 1, l = arguments.length; i < l; i++) { - - leftChain = []; // Todo: this can be cached - rightChain = []; - - if (!compare2Objects(arguments[0], arguments[i])) { - return false; - } - } - - return true; + var i, l, leftChain, rightChain; + + function compare2Objects(x, y) { + var p; + + // remember that NaN === NaN returns false + // and isNaN(undefined) returns true + if (isNaN(x) && isNaN(y) && typeof x === 'number' && typeof y === 'number') { + return true; + } + + // Compare primitives and functions. + // Check if both arguments link to the same object. + // Especially useful on the step where we compare prototypes + if (x === y) { + return true; + } + + // Works in case when functions are created in constructor. + // Comparing dates is a common scenario. Another built-ins? + // We can even handle functions passed across iframes + if ((typeof x === 'function' && typeof y === 'function') || (x instanceof Date && y instanceof Date) + || (x instanceof RegExp && y instanceof RegExp) || (x instanceof String && y instanceof String) + || (x instanceof Number && y instanceof Number)) { + return x.toString() === y.toString(); + } + + // At last checking prototypes as good as we can + if (!(x instanceof Object && y instanceof Object)) { + return false; + } + + if (x.isPrototypeOf(y) || y.isPrototypeOf(x)) { + return false; + } + + if (x.constructor !== y.constructor) { + return false; + } + + if (x.prototype !== y.prototype) { + return false; + } + + // Check for infinitive linking loops + if (leftChain.indexOf(x) > -1 || rightChain.indexOf(y) > -1) { + return false; + } + + // Quick checking of one object being a subset of another. + // todo: cache the structure of arguments[0] for performance + for (p in y) { + if (y.hasOwnProperty(p) !== x.hasOwnProperty(p)) { + return false; + } else if (typeof y[p] !== typeof x[p]) { + return false; + } + } + + for (p in x) { + if (y.hasOwnProperty(p) !== x.hasOwnProperty(p)) { + return false; + } else if (typeof y[p] !== typeof x[p]) { + return false; + } + + switch (typeof (x[p])) { + case 'object': + case 'function': + + leftChain.push(x); + rightChain.push(y); + + if (!compare2Objects(x[p], y[p])) { + return false; + } + + leftChain.pop(); + rightChain.pop(); + break; + + default: + if (x[p] !== y[p]) { + return false; + } + break; + } + } + + return true; + } + + if (arguments.length < 1) { + return true; + } + + for (i = 1, l = arguments.length; i < l; i++) { + + leftChain = []; // Todo: this can be cached + rightChain = []; + + if (!compare2Objects(arguments[0], arguments[i])) { + return false; + } + } + + return true; } function getHomepageURL() { - var homepageURL = location.protocol - + "//" - + window.location.hostname - + (location.port ? ':' + location.port : '') - + (location.pathname.endsWith("/monitoring/") ? location.pathname - .substring(0, location.pathname.indexOf("monitoring/")) - : location.pathname); - location.href = homepageURL; + var homepageURL = location.protocol + + "//" + + window.location.hostname + + (location.port ? ':' + location.port : '') + + (location.pathname.endsWith("/monitoring/") ? location.pathname.substring(0, location.pathname + .indexOf("monitoring/")) : location.pathname); + location.href = homepageURL; } \ No newline at end of file diff --git a/client/client-monitoring/src/main/resources/webapp/js/avsc/avsc.js b/client/client-monitoring/src/main/resources/webapp/js/avsc/avsc.js index 717794363..5a731c91f 100644 --- a/client/client-monitoring/src/main/resources/webapp/js/avsc/avsc.js +++ b/client/client-monitoring/src/main/resources/webapp/js/avsc/avsc.js @@ -671,9 +671,9 @@ module.exports = { Z_TREES: 6, /* - * Return codes for the compression/decompression functions. Negative values - * are errors, positive values are used for special but normal events. - */ + * Return codes for the compression/decompression functions. Negative values + * are errors, positive values are used for special but normal events. + */ Z_OK: 0, Z_STREAM_END: 1, Z_NEED_DICT: 2, @@ -852,14 +852,14 @@ var BUSY_STATE = 113; var FINISH_STATE = 666; var BS_NEED_MORE = 1; /* - * block not completed, need more input or more - * output - */ + * block not completed, need more input or more + * output + */ var BS_BLOCK_DONE = 2; /* block flush performed */ var BS_FINISH_STARTED = 3; /* - * finish started, need only more output at next - * deflate - */ + * finish started, need only more output at next + * deflate + */ var BS_FINISH_DONE = 4; /* finish done, accept no more input or output */ var OS_CODE = 0x03; // Unix :) . Don't detect, use this default. @@ -987,18 +987,18 @@ function longest_match(s, cur_match) { var prev = s.prev; /* - * Stop when cur_match becomes <= limit. To simplify the code, we prevent - * matches with the string of window index 0. - */ + * Stop when cur_match becomes <= limit. To simplify the code, we prevent + * matches with the string of window index 0. + */ var strend = s.strstart + MAX_MATCH; var scan_end1 = _win[scan + best_len - 1]; var scan_end = _win[scan + best_len]; /* - * The code is optimized for HASH_BITS >= 8 and MAX_MATCH-2 multiple of 16. - * It is easy to get rid of this optimization if necessary. - */ + * The code is optimized for HASH_BITS >= 8 and MAX_MATCH-2 multiple of 16. + * It is easy to get rid of this optimization if necessary. + */ // Assert(s->hash_bits >= 8 && MAX_MATCH == 258, "Code too clever"); /* Do not waste too much time if we already have a good match: */ @@ -1006,9 +1006,9 @@ function longest_match(s, cur_match) { chain_length >>= 2; } /* - * Do not look for matches beyond the end of the input. This is necessary to - * make deflate deterministic. - */ + * Do not look for matches beyond the end of the input. This is necessary to + * make deflate deterministic. + */ if (nice_match > s.lookahead) { nice_match = s.lookahead; } // Assert((ulg)s->strstart <= s->window_size-MIN_LOOKAHEAD, "need @@ -1019,14 +1019,14 @@ function longest_match(s, cur_match) { match = cur_match; /* - * Skip to next match if the match length cannot increase or if the match - * length is less than 2. Note that the checks below for insufficient - * lookahead only occur occasionally for performance reasons. Therefore - * uninitialized memory will be accessed, and conditional jumps will be made - * that depend on those values. However the length of the match is limited - * to the lookahead, so the output of deflate is not affected by the - * uninitialized values. - */ + * Skip to next match if the match length cannot increase or if the match + * length is less than 2. Note that the checks below for insufficient + * lookahead only occur occasionally for performance reasons. Therefore + * uninitialized memory will be accessed, and conditional jumps will be made + * that depend on those values. However the length of the match is limited + * to the lookahead, so the output of deflate is not affected by the + * uninitialized values. + */ if (_win[match + best_len] !== scan_end || _win[match + best_len - 1] !== scan_end1 || @@ -1036,19 +1036,19 @@ function longest_match(s, cur_match) { } /* - * The check at best_len-1 can be removed because it will be made again - * later. (This heuristic is not always a win.) It is not necessary to - * compare scan[2] and match[2] since they are always equal when the other - * bytes match, given that the hash keys are equal and that HASH_BITS >= 8. - */ + * The check at best_len-1 can be removed because it will be made again + * later. (This heuristic is not always a win.) It is not necessary to + * compare scan[2] and match[2] since they are always equal when the other + * bytes match, given that the hash keys are equal and that HASH_BITS >= 8. + */ scan += 2; match++; // Assert(*scan == *match, "match[2]?"); /* - * We check for insufficient lookahead only every 8th comparison; the 256th - * check will be made at strstart+258. - */ + * We check for insufficient lookahead only every 8th comparison; the 256th + * check will be made at strstart+258. + */ do { /* jshint noempty:false */ } while (_win[++scan] === _win[++match] && _win[++scan] === _win[++match] && @@ -1115,9 +1115,9 @@ function fill_window(s) { /* - * If the window is almost full and there is insufficient lookahead, move - * the upper half to the lower one to make room in the upper half. - */ + * If the window is almost full and there is insufficient lookahead, move + * the upper half to the lower one to make room in the upper half. + */ if (s.strstart >= _w_size + (_w_size - MIN_LOOKAHEAD)) { utils.arraySet(s.window, s.window, _w_size, _w_size, 0); @@ -1127,12 +1127,12 @@ function fill_window(s) { s.block_start -= _w_size; /* - * Slide the hash table (could be avoided with 32 bit values at the - * expense of memory usage). We slide even when level == 0 to keep the - * hash table consistent if we switch back to level > 0 later. (Using - * level 0 permanently is not an optimal usage of zlib, so we don't care - * about this pathological case.) - */ + * Slide the hash table (could be avoided with 32 bit values at the + * expense of memory usage). We slide even when level == 0 to keep the + * hash table consistent if we switch back to level > 0 later. (Using + * level 0 permanently is not an optimal usage of zlib, so we don't care + * about this pathological case.) + */ n = s.hash_size; p = n; @@ -1147,9 +1147,9 @@ function fill_window(s) { m = s.prev[--p]; s.prev[p] = (m >= _w_size ? m - _w_size : 0); /* - * If n is not on any hash chain, prev[n] is garbage but its value will - * never be used. - */ + * If n is not on any hash chain, prev[n] is garbage but its value will + * never be used. + */ } while (--n); more += _w_size; @@ -1159,15 +1159,15 @@ function fill_window(s) { } /* - * If there was no sliding: strstart <= WSIZE+MAX_DIST-1 && lookahead <= - * MIN_LOOKAHEAD - 1 && more == window_size - lookahead - strstart => more >= - * window_size - (MIN_LOOKAHEAD-1 + WSIZE + MAX_DIST-1) => more >= - * window_size - 2*WSIZE + 2 In the BIG_MEM or MMAP case (not yet - * supported), window_size == input_size + MIN_LOOKAHEAD && strstart + - * s->lookahead <= input_size => more >= MIN_LOOKAHEAD. Otherwise, - * window_size == 2*WSIZE so more >= 2. If there was sliding, more >= WSIZE. - * So in all cases, more >= 2. - */ + * If there was no sliding: strstart <= WSIZE+MAX_DIST-1 && lookahead <= + * MIN_LOOKAHEAD - 1 && more == window_size - lookahead - strstart => more >= + * window_size - (MIN_LOOKAHEAD-1 + WSIZE + MAX_DIST-1) => more >= + * window_size - 2*WSIZE + 2 In the BIG_MEM or MMAP case (not yet + * supported), window_size == input_size + MIN_LOOKAHEAD && strstart + + * s->lookahead <= input_size => more >= MIN_LOOKAHEAD. Otherwise, + * window_size == 2*WSIZE so more >= 2. If there was sliding, more >= WSIZE. + * So in all cases, more >= 2. + */ // Assert(more >= 2, "more < 2"); n = read_buf(s.strm, s.window, s.strstart + s.lookahead, more); s.lookahead += n; @@ -1196,20 +1196,20 @@ function fill_window(s) { } } /* - * If the whole input has less than MIN_MATCH bytes, ins_h is garbage, but - * this is not important since only literal bytes will be emitted. - */ + * If the whole input has less than MIN_MATCH bytes, ins_h is garbage, but + * this is not important since only literal bytes will be emitted. + */ } while (s.lookahead < MIN_LOOKAHEAD && s.strm.avail_in !== 0); /* - * If the WIN_INIT bytes after the end of the current data have never been - * written, then zero those bytes in order to avoid memory check reports of - * the use of uninitialized (or uninitialised as Julian writes) bytes by the - * longest match routines. Update the high water mark for the next time - * through here. WIN_INIT is set to MAX_MATCH since the longest match - * routines allow scanning to strstart + MAX_MATCH, ignoring lookahead. - */ + * If the WIN_INIT bytes after the end of the current data have never been + * written, then zero those bytes in order to avoid memory check reports of + * the use of uninitialized (or uninitialised as Julian writes) bytes by the + * longest match routines. Update the high water mark for the next time + * through here. WIN_INIT is set to MAX_MATCH since the longest match + * routines allow scanning to strstart + MAX_MATCH, ignoring lookahead. + */ // if (s.high_water < s.window_size) { // var curr = s.strstart + s.lookahead; // var init = 0; @@ -1251,9 +1251,9 @@ function fill_window(s) { */ function deflate_stored(s, flush) { /* - * Stored blocks are limited to 0xffff bytes, pending_buf is limited to - * pending_buf_size, and each stored block has a 5 byte header: - */ + * Stored blocks are limited to 0xffff bytes, pending_buf is limited to + * pending_buf_size, and each stored block has a 5 byte header: + */ var max_block_size = 0xffff; if (max_block_size > s.pending_buf_size - 5) { @@ -1305,9 +1305,9 @@ function deflate_stored(s, flush) { } /* - * Flush if we may have to slide, otherwise block_start may become negative - * and the data will be gone: - */ + * Flush if we may have to slide, otherwise block_start may become negative + * and the data will be gone: + */ if (s.strstart - s.block_start >= (s.w_size - MIN_LOOKAHEAD)) { /** * FLUSH_BLOCK(s, 0); ** */ flush_block_only(s, false); @@ -1355,10 +1355,10 @@ function deflate_fast(s, flush) { for (;;) { /* - * Make sure that we always have enough lookahead, except at the end of the - * input file. We need MAX_MATCH bytes for the next match, plus MIN_MATCH - * bytes to insert the string following the next match. - */ + * Make sure that we always have enough lookahead, except at the end of the + * input file. We need MAX_MATCH bytes for the next match, plus MIN_MATCH + * bytes to insert the string following the next match. + */ if (s.lookahead < MIN_LOOKAHEAD) { fill_window(s); if (s.lookahead < MIN_LOOKAHEAD && flush === Z_NO_FLUSH) { @@ -1370,9 +1370,9 @@ function deflate_fast(s, flush) { } /* - * Insert the string window[strstart .. strstart+2] in the dictionary, and - * set hash_head to the head of the hash chain: - */ + * Insert the string window[strstart .. strstart+2] in the dictionary, and + * set hash_head to the head of the hash chain: + */ hash_head = 0/* NIL */; if (s.lookahead >= MIN_MATCH) { /** * INSERT_STRING(s, s.strstart, hash_head); ** */ @@ -1383,15 +1383,15 @@ function deflate_fast(s, flush) { } /* - * Find the longest match, discarding those <= prev_length. At this point we - * have always match_length < MIN_MATCH - */ + * Find the longest match, discarding those <= prev_length. At this point we + * have always match_length < MIN_MATCH + */ if (hash_head !== 0/* NIL */ && ((s.strstart - hash_head) <= (s.w_size - MIN_LOOKAHEAD))) { /* - * To simplify the code, we prevent matches with the string of window - * index 0 (in particular we have to avoid a match of the string with - * itself at the start of the input file). - */ + * To simplify the code, we prevent matches with the string of window + * index 0 (in particular we have to avoid a match of the string with + * itself at the start of the input file). + */ s.match_length = longest_match(s, hash_head); /* longest_match() sets match_start */ } @@ -1400,17 +1400,17 @@ function deflate_fast(s, flush) { // debug only /*********************************************************************** - * * _tr_tally_dist(s, s.strstart - s.match_start, s.match_length - - * MIN_MATCH, bflush); - **********************************************************************/ + * * _tr_tally_dist(s, s.strstart - s.match_start, s.match_length - + * MIN_MATCH, bflush); + **********************************************************************/ bflush = trees._tr_tally(s, s.strstart - s.match_start, s.match_length - MIN_MATCH); s.lookahead -= s.match_length; /* - * Insert new strings in the hash table only if the match length is not - * too large. This saves time but degrades compression. - */ + * Insert new strings in the hash table only if the match length is not + * too large. This saves time but degrades compression. + */ if (s.match_length <= s.max_lazy_match/* max_insert_length */ && s.lookahead >= MIN_MATCH) { s.match_length--; /* string at strstart already in table */ do { @@ -1421,9 +1421,9 @@ function deflate_fast(s, flush) { s.head[s.ins_h] = s.strstart; /***/ /* - * strstart never exceeds WSIZE-MAX_MATCH, so there are always - * MIN_MATCH bytes ahead. - */ + * strstart never exceeds WSIZE-MAX_MATCH, so there are always + * MIN_MATCH bytes ahead. + */ } while (--s.match_length !== 0); s.strstart++; } else @@ -1438,9 +1438,9 @@ function deflate_fast(s, flush) { // Call UPDATE_HASH() MIN_MATCH-3 more times // #endif /* - * If lookahead < MIN_MATCH, ins_h is garbage, but it does not matter - * since it will be recomputed at next deflate call. - */ + * If lookahead < MIN_MATCH, ins_h is garbage, but it does not matter + * since it will be recomputed at next deflate call. + */ } } else { /* No match, output a literal byte */ @@ -1496,10 +1496,10 @@ function deflate_slow(s, flush) { /* Process the input block. */ for (;;) { /* - * Make sure that we always have enough lookahead, except at the end of the - * input file. We need MAX_MATCH bytes for the next match, plus MIN_MATCH - * bytes to insert the string following the next match. - */ + * Make sure that we always have enough lookahead, except at the end of the + * input file. We need MAX_MATCH bytes for the next match, plus MIN_MATCH + * bytes to insert the string following the next match. + */ if (s.lookahead < MIN_LOOKAHEAD) { fill_window(s); if (s.lookahead < MIN_LOOKAHEAD && flush === Z_NO_FLUSH) { @@ -1509,9 +1509,9 @@ function deflate_slow(s, flush) { } /* - * Insert the string window[strstart .. strstart+2] in the dictionary, and - * set hash_head to the head of the hash chain: - */ + * Insert the string window[strstart .. strstart+2] in the dictionary, and + * set hash_head to the head of the hash chain: + */ hash_head = 0/* NIL */; if (s.lookahead >= MIN_MATCH) { /** * INSERT_STRING(s, s.strstart, hash_head); ** */ @@ -1522,8 +1522,8 @@ function deflate_slow(s, flush) { } /* - * Find the longest match, discarding those <= prev_length. - */ + * Find the longest match, discarding those <= prev_length. + */ s.prev_length = s.match_length; s.prev_match = s.match_start; s.match_length = MIN_MATCH - 1; @@ -1531,10 +1531,10 @@ function deflate_slow(s, flush) { if (hash_head !== 0/* NIL */ && s.prev_length < s.max_lazy_match && s.strstart - hash_head <= (s.w_size - MIN_LOOKAHEAD)/* MAX_DIST(s) */) { /* - * To simplify the code, we prevent matches with the string of window - * index 0 (in particular we have to avoid a match of the string with - * itself at the start of the input file). - */ + * To simplify the code, we prevent matches with the string of window + * index 0 (in particular we have to avoid a match of the string with + * itself at the start of the input file). + */ s.match_length = longest_match(s, hash_head); /* longest_match() sets match_start */ @@ -1542,16 +1542,16 @@ function deflate_slow(s, flush) { (s.strategy === Z_FILTERED || (s.match_length === MIN_MATCH && s.strstart - s.match_start > 4096/* TOO_FAR */))) { /* - * If prev_match is also MIN_MATCH, match_start is garbage but we will - * ignore the current match anyway. - */ + * If prev_match is also MIN_MATCH, match_start is garbage but we will + * ignore the current match anyway. + */ s.match_length = MIN_MATCH - 1; } } /* - * If there was a match at the previous step and the current match is not - * better, output the previous match: - */ + * If there was a match at the previous step and the current match is not + * better, output the previous match: + */ if (s.prev_length >= MIN_MATCH && s.match_length <= s.prev_length) { max_insert = s.strstart + s.lookahead - MIN_MATCH; /* Do not insert strings in hash table beyond this. */ @@ -1559,15 +1559,15 @@ function deflate_slow(s, flush) { // check_match(s, s.strstart-1, s.prev_match, s.prev_length); /*********************************************************************** - * *_tr_tally_dist(s, s.strstart - 1 - s.prev_match, s.prev_length - - * MIN_MATCH, bflush); - **********************************************************************/ + * *_tr_tally_dist(s, s.strstart - 1 - s.prev_match, s.prev_length - + * MIN_MATCH, bflush); + **********************************************************************/ bflush = trees._tr_tally(s, s.strstart - 1 - s.prev_match, s.prev_length - MIN_MATCH); /* - * Insert in hash table all strings up to the end of the match. - * strstart-1 and strstart are already inserted. If there is not enough - * lookahead, the last two strings are not inserted in the hash table. - */ + * Insert in hash table all strings up to the end of the match. + * strstart-1 and strstart are already inserted. If there is not enough + * lookahead, the last two strings are not inserted in the hash table. + */ s.lookahead -= s.prev_length - 1; s.prev_length -= 2; do { @@ -1594,10 +1594,10 @@ function deflate_slow(s, flush) { } else if (s.match_available) { /* - * If there was no match at the previous position, output a single - * literal. If there was a match but the current match is longer, - * truncate the previous match to a single literal. - */ + * If there was no match at the previous position, output a single + * literal. If there was a match but the current match is longer, + * truncate the previous match to a single literal. + */ // Tracevv((stderr,"%c", s->window[s->strstart-1])); /** * _tr_tally_lit(s, s.window[s.strstart-1], bflush); ** */ bflush = trees._tr_tally(s, 0, s.window[s.strstart - 1]); @@ -1614,9 +1614,9 @@ function deflate_slow(s, flush) { } } else { /* - * There is no previous match to compare with, wait for the next step to - * decide. - */ + * There is no previous match to compare with, wait for the next step to + * decide. + */ s.match_available = 1; s.strstart++; s.lookahead--; @@ -1668,10 +1668,10 @@ function deflate_rle(s, flush) { for (;;) { /* - * Make sure that we always have enough lookahead, except at the end of the - * input file. We need MAX_MATCH bytes for the longest run, plus one for the - * unrolled loop. - */ + * Make sure that we always have enough lookahead, except at the end of the + * input file. We need MAX_MATCH bytes for the longest run, plus one for the + * unrolled loop. + */ if (s.lookahead <= MAX_MATCH) { fill_window(s); if (s.lookahead <= MAX_MATCH && flush === Z_NO_FLUSH) { @@ -1828,9 +1828,9 @@ configuration_table = [ /* good lazy nice chain */ new Config(0, 0, 0, 0, deflate_stored), /* 0 store only */ new Config(4, 4, 8, 4, deflate_fast), /* - * 1 max speed, no lazy - * matches - */ + * 1 max speed, no lazy + * matches + */ new Config(4, 5, 16, 8, deflate_fast), /* 2 */ new Config(4, 6, 32, 32, deflate_fast), /* 3 */ @@ -1854,8 +1854,8 @@ function lm_init(s) { zero(s.head); // Fill with NIL (= 0); /* - * Set the default configuration parameters: - */ + * Set the default configuration parameters: + */ s.max_lazy_match = configuration_table[s.level].max_lazy; s.good_match = configuration_table[s.level].good_length; s.nice_match = configuration_table[s.level].nice_length; @@ -1890,25 +1890,25 @@ function DeflateState() { this.window = null; /* - * Sliding window. Input bytes are read into the second half of the window, - * and move to the first half later to keep a dictionary of at least wSize - * bytes. With this organization, matches are limited to a distance of - * wSize-MAX_MATCH bytes, but this ensures that IO is always performed with - * a length multiple of the block size. - */ + * Sliding window. Input bytes are read into the second half of the window, + * and move to the first half later to keep a dictionary of at least wSize + * bytes. With this organization, matches are limited to a distance of + * wSize-MAX_MATCH bytes, but this ensures that IO is always performed with + * a length multiple of the block size. + */ this.window_size = 0; /* - * Actual size of window: 2*wSize, except when the user input buffer is - * directly used as sliding window. - */ + * Actual size of window: 2*wSize, except when the user input buffer is + * directly used as sliding window. + */ this.prev = null; /* - * Link to older string with same hash index. To limit the size of this - * array to 64K, this link is maintained only for the last 32K strings. An - * index in this array is thus a window index modulo 32K. - */ + * Link to older string with same hash index. To limit the size of this + * array to 64K, this link is maintained only for the last 32K strings. An + * index in this array is thus a window index modulo 32K. + */ this.head = null; /* Heads of the hash chains or NIL. */ @@ -1919,16 +1919,16 @@ function DeflateState() { this.hash_shift = 0; /* - * Number of bits by which ins_h must be shifted at each input step. It must - * be such that after MIN_MATCH steps, the oldest byte no longer takes part - * in the hash key, that is: hash_shift * MIN_MATCH >= hash_bits - */ + * Number of bits by which ins_h must be shifted at each input step. It must + * be such that after MIN_MATCH steps, the oldest byte no longer takes part + * in the hash key, that is: hash_shift * MIN_MATCH >= hash_bits + */ this.block_start = 0; /* - * Window position at the beginning of the current output block. Gets - * negative when the window is moved backwards. - */ + * Window position at the beginning of the current output block. Gets + * negative when the window is moved backwards. + */ this.match_length = 0; /* length of best match */ this.prev_match = 0; /* previous match */ @@ -1939,29 +1939,29 @@ function DeflateState() { this.prev_length = 0; /* - * Length of the best match at previous step. Matches not greater than this - * are discarded. This is used in the lazy match evaluation. - */ + * Length of the best match at previous step. Matches not greater than this + * are discarded. This is used in the lazy match evaluation. + */ this.max_chain_length = 0; /* - * To speed up deflation, hash chains are never searched beyond this length. - * A higher limit improves compression ratio but degrades the speed. - */ + * To speed up deflation, hash chains are never searched beyond this length. + * A higher limit improves compression ratio but degrades the speed. + */ this.max_lazy_match = 0; /* - * Attempt to find a better match only when the current match is strictly - * smaller than this value. This mechanism is used only for compression - * levels >= 4. - */ + * Attempt to find a better match only when the current match is strictly + * smaller than this value. This mechanism is used only for compression + * levels >= 4. + */ // That's alias to max_lazy_match, don't use directly // this.max_insert_length = 0; /* - * Insert new strings in the hash table only if the match length is not - * greater than this length. This saves time but degrades compression. - * max_insert_length is used only for compression levels <= 3. - */ + * Insert new strings in the hash table only if the match length is not + * greater than this length. This saves time but degrades compression. + * max_insert_length is used only for compression levels <= 3. + */ this.level = 0; /* compression level (1..9) */ this.strategy = 0; /* favor or force Huffman coding */ @@ -1999,52 +1999,52 @@ function DeflateState() { // int heap[2*L_CODES+1]; /* heap used to build the Huffman trees */ this.heap = new utils.Buf16(2 * L_CODES + 1); /* - * heap used to build the - * Huffman trees - */ + * heap used to build the + * Huffman trees + */ zero(this.heap); this.heap_len = 0; /* number of elements in the heap */ this.heap_max = 0; /* element of largest frequency */ /* - * The sons of heap[n] are heap[2*n] and heap[2*n+1]. heap[0] is not used. - * The same heap array is used to build all trees. - */ + * The sons of heap[n] are heap[2*n] and heap[2*n+1]. heap[0] is not used. + * The same heap array is used to build all trees. + */ this.depth = new utils.Buf16(2 * L_CODES + 1); // uch depth[2*L_CODES+1]; zero(this.depth); /* - * Depth of each subtree used as tie breaker for trees of equal frequency - */ + * Depth of each subtree used as tie breaker for trees of equal frequency + */ this.l_buf = 0; /* buffer index for literals or lengths */ this.lit_bufsize = 0; /* - * Size of match buffer for literals/lengths. There are 4 reasons for - * limiting lit_bufsize to 64K: - frequencies can be kept in 16 bit counters - - * if compression is not successful for the first block, all input data is - * still in the window so we can still emit a stored block even when input - * comes from standard input. (This can also be done for all blocks if - * lit_bufsize is not greater than 32K.) - if compression is not successful - * for a file smaller than 64K, we can even emit a stored file instead of a - * stored block (saving 5 bytes). This is applicable only for zip (not gzip - * or zlib). - creating new Huffman trees less frequently may not provide - * fast adaptation to changes in the input data statistics. (Take for - * example a binary file with poorly compressible code followed by a highly - * compressible string table.) Smaller buffer sizes give fast adaptation but - * have of course the overhead of transmitting trees more frequently. - I - * can't count above 4 - */ + * Size of match buffer for literals/lengths. There are 4 reasons for + * limiting lit_bufsize to 64K: - frequencies can be kept in 16 bit counters - + * if compression is not successful for the first block, all input data is + * still in the window so we can still emit a stored block even when input + * comes from standard input. (This can also be done for all blocks if + * lit_bufsize is not greater than 32K.) - if compression is not successful + * for a file smaller than 64K, we can even emit a stored file instead of a + * stored block (saving 5 bytes). This is applicable only for zip (not gzip + * or zlib). - creating new Huffman trees less frequently may not provide + * fast adaptation to changes in the input data statistics. (Take for + * example a binary file with poorly compressible code followed by a highly + * compressible string table.) Smaller buffer sizes give fast adaptation but + * have of course the overhead of transmitting trees more frequently. - I + * can't count above 4 + */ this.last_lit = 0; /* running index in l_buf */ this.d_buf = 0; /* - * Buffer index for distances. To simplify the code, d_buf and l_buf have - * the same number of elements. To use different lengths, an extra flag - * array would be necessary. - */ + * Buffer index for distances. To simplify the code, d_buf and l_buf have + * the same number of elements. To use different lengths, an extra flag + * array would be necessary. + */ this.opt_len = 0; /* bit length of current block with optimal trees */ this.static_len = 0; /* bit length of current block with static trees */ @@ -2054,24 +2054,24 @@ function DeflateState() { this.bi_buf = 0; /* - * Output buffer. bits are inserted starting at the bottom (least - * significant bits). - */ + * Output buffer. bits are inserted starting at the bottom (least + * significant bits). + */ this.bi_valid = 0; /* - * Number of valid bits in bi_buf. All bits above the last valid bit are - * always zero. - */ + * Number of valid bits in bi_buf. All bits above the last valid bit are + * always zero. + */ // Used for window memory init. We safely ignore it for JS. That makes // sense only for pointers and memory check tools. // this.high_water = 0; /* - * High water mark offset in window for initialized bytes -- bytes above - * this are set to zero in order to avoid memory check warnings when longest - * match routines access bytes past the input. This is then updated to the - * new high water mark. - */ + * High water mark offset in window for initialized bytes -- bytes above + * this are set to zero in order to avoid memory check warnings when longest + * match routines access bytes past the input. This is then updated to the + * new high water mark. + */ } @@ -2430,20 +2430,20 @@ function deflate(strm, flush) { flush_pending(strm); if (strm.avail_out === 0) { /* - * Since avail_out is 0, deflate will be called again with more output - * space, but possibly with both pending and avail_in equal to zero. - * There won't be anything to do, but this is not an error situation so - * make sure we return OK instead of BUF_ERROR at next call of deflate: - */ + * Since avail_out is 0, deflate will be called again with more output + * space, but possibly with both pending and avail_in equal to zero. + * There won't be anything to do, but this is not an error situation so + * make sure we return OK instead of BUF_ERROR at next call of deflate: + */ s.last_flush = -1; return Z_OK; } /* - * Make sure there is something to do and avoid duplicate consecutive - * flushes. For repeated and useless calls with Z_FINISH, we keep returning - * Z_STREAM_END instead of Z_BUF_ERROR. - */ + * Make sure there is something to do and avoid duplicate consecutive + * flushes. For repeated and useless calls with Z_FINISH, we keep returning + * Z_STREAM_END instead of Z_BUF_ERROR. + */ } else if (strm.avail_in === 0 && rank(flush) <= rank(old_flush) && flush !== Z_FINISH) { return err(strm, Z_BUF_ERROR); @@ -2455,8 +2455,8 @@ function deflate(strm, flush) { } /* - * Start a new block or continue the current one. - */ + * Start a new block or continue the current one. + */ if (strm.avail_in !== 0 || s.lookahead !== 0 || (flush !== Z_NO_FLUSH && s.status !== FINISH_STATE)) { var bstate = (s.strategy === Z_HUFFMAN_ONLY) ? deflate_huff(s, flush) : @@ -2473,12 +2473,12 @@ function deflate(strm, flush) { } return Z_OK; /* - * If flush != Z_NO_FLUSH && avail_out == 0, the next call of deflate - * should use the same flush parameter to make sure that the flush is - * complete. So we don't have to output an empty block here, this will - * be done at next call. This also ensures that for a very small output - * buffer, we emit at most one empty block. - */ + * If flush != Z_NO_FLUSH && avail_out == 0, the next call of deflate + * should use the same flush parameter to make sure that the flush is + * complete. So we don't have to output an empty block here, this will + * be done at next call. This also ensures that for a very small output + * buffer, we emit at most one empty block. + */ } if (bstate === BS_BLOCK_DONE) { if (flush === Z_PARTIAL_FLUSH) { @@ -2488,9 +2488,9 @@ function deflate(strm, flush) { trees._tr_stored_block(s, 0, 0, false); /* - * For a full flush, this empty block will be recognized as a special - * marker by inflate_sync(). - */ + * For a full flush, this empty block will be recognized as a special + * marker by inflate_sync(). + */ if (flush === Z_FULL_FLUSH) { /** * CLEAR_HASH(s); ** */ /* forget history */ zero(s.head); // Fill with NIL (= 0); @@ -2534,9 +2534,9 @@ function deflate(strm, flush) { flush_pending(strm); /* - * If avail_out is zero, the application will call deflate again to flush - * the rest. - */ + * If avail_out is zero, the application will call deflate again to flush + * the rest. + */ if (s.wrap > 0) { s.wrap = -s.wrap; } /* write the trailer only once! */ return s.pending !== 0 ? Z_OK : Z_STREAM_END; @@ -2699,15 +2699,14 @@ var TYPE = 12; /* i: waiting for type bits, including last-flag bit */ * reached end of block code, inflate() to interpret next block BAD -- error in * block data * - * Notes: - * - The maximum input bits used by a length/distance pair is 15 bits for the - * length code, 5 bits for the length extra, 15 bits for the distance code, and - * 13 bits for the distance extra. This totals 48 bits, or six bytes. Therefore - * if strm.avail_in >= 6, then there is enough input to avoid checking for - * available input while decoding. - * - The maximum bytes that a single length/distance pair can output is 258 - * bytes, which is the maximum length that can be coded. inflate_fast() requires - * strm.avail_out >= 258 for each loop to avoid checking for output space. + * Notes: - The maximum input bits used by a length/distance pair is 15 bits for + * the length code, 5 bits for the length extra, 15 bits for the distance code, + * and 13 bits for the distance extra. This totals 48 bits, or six bytes. + * Therefore if strm.avail_in >= 6, then there is enough input to avoid checking + * for available input while decoding. - The maximum bytes that a single + * length/distance pair can output is 258 bytes, which is the maximum length + * that can be coded. inflate_fast() requires strm.avail_out >= 258 for each + * loop to avoid checking for output space. */ module.exports = function inflate_fast(strm, start) { var state; @@ -2768,9 +2767,9 @@ module.exports = function inflate_fast(strm, start) { /* - * decode literals and length/distances until end-of-block or not enough - * input data or output space - */ + * decode literals and length/distances until end-of-block or not enough + * input data or output space + */ top: do { @@ -3052,9 +3051,9 @@ var HEAD = 1; /* i: waiting for magic header */ var FLAGS = 2; /* i: waiting for method and flags (gzip) */ var TIME = 3; /* i: waiting for modification time (gzip) */ var OS = 4; /* - * i: waiting for extra flags and operating system - * (gzip) - */ + * i: waiting for extra flags and operating system + * (gzip) + */ var EXLEN = 5; /* i: waiting for extra length (gzip) */ var EXTRA = 6; /* i: waiting for extra bytes (gzip) */ var NAME = 7; /* i: waiting for end of file name (gzip) */ @@ -3064,24 +3063,24 @@ var DICTID = 10; /* i: waiting for dictionary check value */ var DICT = 11; /* waiting for inflateSetDictionary() call */ var TYPE = 12; /* i: waiting for type bits, including last-flag bit */ var TYPEDO = 13; /* - * i: same, but skip check to exit inflate on new - * block - */ + * i: same, but skip check to exit inflate on new + * block + */ var STORED = 14; /* - * i: waiting for stored size (length and - * complement) - */ + * i: waiting for stored size (length and + * complement) + */ var COPY_ = 15; /* i/o: same as COPY below, but only first time in */ var COPY = 16; /* - * i/o: waiting for input or output to copy stored - * block - */ + * i/o: waiting for input or output to copy stored + * block + */ var TABLE = 17; /* i: waiting for dynamic block table lengths */ var LENLENS = 18; /* i: waiting for code length code lengths */ var CODELENS = 19; /* - * i: waiting for length/lit and distance code - * lengths - */ + * i: waiting for length/lit and distance code + * lengths + */ var LEN_ = 20; /* i: same as LEN below, but only first time in */ var LEN = 21; /* i: waiting for length/lit/eob code */ var LENEXT = 22; /* i: waiting for length extra bits */ @@ -3094,13 +3093,13 @@ var LENGTH = 28; /* i: waiting for 32-bit length (gzip) */ var DONE = 29; /* finished check, done -- remain here until reset */ var BAD = 30; /* got a data error -- remain here until reset */ var MEM = 31; /* - * got an inflate() memory error -- remain here until - * reset - */ + * got an inflate() memory error -- remain here until + * reset + */ var SYNC = 32; /* - * looking for synchronization bytes to restart - * inflate() - */ + * looking for synchronization bytes to restart + * inflate() + */ /* =========================================================================== */ @@ -3170,18 +3169,18 @@ function InflateState() { this.work = new utils.Buf16(288); /* work area for code table building */ /* - * because we don't have pointers in js, we use lencode and distcode - * directly as buffers so we don't need codes - */ + * because we don't have pointers in js, we use lencode and distcode + * directly as buffers so we don't need codes + */ // this.codes = new utils.Buf32(ENOUGH); /* space for code tables */ this.lendyn = null; /* - * dynamic table for length/literal codes - * (JS specific) - */ + * dynamic table for length/literal codes + * (JS specific) + */ this.distdyn = null; /* - * dynamic table for distance codes (JS - * specific) - */ + * dynamic table for distance codes (JS + * specific) + */ this.sane = 0; /* if false, allow invalid distance too far */ this.back = 0; /* bits back of last unprocessed length/lit */ this.was = 0; /* initial length of match */ @@ -3647,9 +3646,9 @@ function inflate(strm, flush) { // - no need for additional size check copy, /* - * len + copy > state.head.extra_max - len ? - * state.head.extra_max : copy, - */ + * len + copy > state.head.extra_max - len ? + * state.head.extra_max : copy, + */ len ); // zmemcpy(state.head.extra + len, next, @@ -4075,10 +4074,10 @@ function inflate(strm, flush) { } /* - * build code tables -- note: do not change the lenbits or distbits - * values here (9 and 6) without reading the comments in inftrees.h - * concerning the ENOUGH constants, which depend on those values - */ + * build code tables -- note: do not change the lenbits or distbits + * values here (9 and 6) without reading the comments in inftrees.h + * concerning the ENOUGH constants, which depend on those values + */ state.lenbits = 9; opts = { bits: state.lenbits }; @@ -4168,9 +4167,9 @@ function inflate(strm, flush) { for (;;) { here = state.lencode[last_val + ((hold & ((1 << (last_bits + last_op)) - 1))/* - * BITS(last.bits + - * last.op) - */ >> last_bits)]; + * BITS(last.bits + + * last.op) + */ >> last_bits)]; here_bits = here >>> 24; here_op = (here >>> 16) & 0xff; here_val = here & 0xffff; @@ -4260,9 +4259,9 @@ function inflate(strm, flush) { for (;;) { here = state.distcode[last_val + ((hold & ((1 << (last_bits + last_op)) - 1))/* - * BITS(last.bits + - * last.op) - */ >> last_bits)]; + * BITS(last.bits + + * last.op) + */ >> last_bits)]; here_bits = here >>> 24; here_op = (here >>> 16) & 0xff; here_val = here & 0xffff; @@ -4456,11 +4455,11 @@ function inflate(strm, flush) { // inf_leave" /* - * Return from inflate(), updating the total counts and the check value. If - * there was no progress during the inflate() call, return a buffer error. - * Call updatewindow() to create and/or update the window state. Note: a - * memory error from inflate() is non-recoverable. - */ + * Return from inflate(), updating the total counts and the check value. If + * there was no progress during the inflate() call, return a buffer error. + * Call updatewindow() to create and/or update the window state. Note: a + * memory error from inflate() is non-recoverable. + */ // --- RESTORE() --- strm.next_out = put; @@ -4485,9 +4484,9 @@ function inflate(strm, flush) { state.total += _out; if (state.wrap && _out) { strm.adler = state.check = /* - * UPDATE(state.check, strm.next_out - _out, - * _out); - */ + * UPDATE(state.check, strm.next_out - _out, + * _out); + */ (state.flags ? crc32(state.check, output, _out, strm.next_out - _out) : adler32(state.check, output, _out, strm.next_out - _out)); } strm.data_type = state.bits + (state.last ? 64 : 0) + @@ -4552,9 +4551,9 @@ function inflateSetDictionary(strm, dictionary) { } } /* - * copy dictionary to window using updatewindow(), which will amend the - * existing dictionary if appropriate - */ + * copy dictionary to window using updatewindow(), which will amend the + * existing dictionary if appropriate + */ ret = updatewindow(strm, dictionary, dictLength, dictLength); if (ret) { state.mode = MEM; @@ -4654,32 +4653,32 @@ module.exports = function inflate_table(type, lens, lens_index, codes, table, ta var here_bits, here_op, here_val; /* - * Process a set of code lengths to create a canonical Huffman code. The - * code lengths are lens[0..codes-1]. Each length corresponds to the symbols - * 0..codes-1. The Huffman code is generated by first sorting the symbols by - * length from short to long, and retaining the symbol order for codes with - * equal lengths. Then the code starts with all zero bits for the first code - * of the shortest length, and the codes are integer increments for the same - * length, and zeros are appended as the length increases. For the deflate - * format, these bits are stored backwards from their more natural integer - * increment ordering, and so when the decoding tables are built in the - * large loop below, the integer codes are incremented backwards. - * - * This routine assumes, but does not check, that all of the entries in - * lens[] are in the range 0..MAXBITS. The caller must assure this. - * 1..MAXBITS is interpreted as that code length. zero means that that - * symbol does not occur in this code. - * - * The codes are sorted by computing a count of codes for each length, - * creating from that a table of starting indices for each length in the - * sorted table, and then entering the symbols in order in the sorted table. - * The sorted table is work[], with that space being provided by the caller. - * - * The length counts are used for other purposes as well, i.e. finding the - * minimum and maximum length codes, determining if there are any codes at - * all, checking for a valid set of lengths, and looking ahead at length - * counts to determine sub-table sizes when building the decoding tables. - */ + * Process a set of code lengths to create a canonical Huffman code. The + * code lengths are lens[0..codes-1]. Each length corresponds to the symbols + * 0..codes-1. The Huffman code is generated by first sorting the symbols by + * length from short to long, and retaining the symbol order for codes with + * equal lengths. Then the code starts with all zero bits for the first code + * of the shortest length, and the codes are integer increments for the same + * length, and zeros are appended as the length increases. For the deflate + * format, these bits are stored backwards from their more natural integer + * increment ordering, and so when the decoding tables are built in the + * large loop below, the integer codes are incremented backwards. + * + * This routine assumes, but does not check, that all of the entries in + * lens[] are in the range 0..MAXBITS. The caller must assure this. + * 1..MAXBITS is interpreted as that code length. zero means that that + * symbol does not occur in this code. + * + * The codes are sorted by computing a count of codes for each length, + * creating from that a table of starting indices for each length in the + * sorted table, and then entering the symbols in order in the sorted table. + * The sorted table is work[], with that space being provided by the caller. + * + * The length counts are used for other purposes as well, i.e. finding the + * minimum and maximum length codes, determining if there are any codes at + * all, checking for a valid set of lengths, and looking ahead at length + * counts to determine sub-table sizes when building the decoding tables. + */ /* accumulate lengths for codes (assumes lens[] all in 0..MAXBITS) */ for (len = 0; len <= MAXBITS; len++) { @@ -4747,35 +4746,35 @@ module.exports = function inflate_table(type, lens, lens_index, codes, table, ta } /* - * Create and fill in decoding tables. In this loop, the table being filled - * is at next and has curr index bits. The code being used is huff with - * length len. That code is converted to an index by dropping drop bits off - * of the bottom. For codes where len is less than drop + curr, those top - * drop + curr - len bits are incremented through all values to fill the - * table with replicated entries. - * - * root is the number of index bits for the root table. When len exceeds - * root, sub-tables are created pointed to by the root entry with an index - * of the low root bits of huff. This is saved in low to check for when a - * new sub-table should be started. drop is zero when the root table is - * being filled, and drop is root when sub-tables are being filled. - * - * When a new sub-table is needed, it is necessary to look ahead in the code - * lengths to determine what size sub-table is needed. The length counts are - * used for this, and so count[] is decremented as codes are entered in the - * tables. - * - * used keeps track of how many table entries have been allocated from the - * provided *table space. It is checked for LENS and DIST tables against the - * constants ENOUGH_LENS and ENOUGH_DISTS to guard against changes in the - * initial root table size constants. See the comments in inftrees.h for - * more information. - * - * sym increments through all symbols, and the loop terminates when all - * codes of length max, i.e. all codes, have been processed. This routine - * permits incomplete codes, so another loop after this one fills in the - * rest of the decoding tables with invalid code markers. - */ + * Create and fill in decoding tables. In this loop, the table being filled + * is at next and has curr index bits. The code being used is huff with + * length len. That code is converted to an index by dropping drop bits off + * of the bottom. For codes where len is less than drop + curr, those top + * drop + curr - len bits are incremented through all values to fill the + * table with replicated entries. + * + * root is the number of index bits for the root table. When len exceeds + * root, sub-tables are created pointed to by the root entry with an index + * of the low root bits of huff. This is saved in low to check for when a + * new sub-table should be started. drop is zero when the root table is + * being filled, and drop is root when sub-tables are being filled. + * + * When a new sub-table is needed, it is necessary to look ahead in the code + * lengths to determine what size sub-table is needed. The length counts are + * used for this, and so count[] is decremented as codes are entered in the + * tables. + * + * used keeps track of how many table entries have been allocated from the + * provided *table space. It is checked for LENS and DIST tables against the + * constants ENOUGH_LENS and ENOUGH_DISTS to guard against changes in the + * initial root table size constants. See the comments in inftrees.h for + * more information. + * + * sym increments through all symbols, and the loop terminates when all + * codes of length max, i.e. all codes, have been processed. This routine + * permits incomplete codes, so another loop after this one fills in the + * rest of the decoding tables with invalid code markers. + */ /* set up for code type */ // poor man optimization - use if-else instead of switch, @@ -4891,18 +4890,18 @@ module.exports = function inflate_table(type, lens, lens_index, codes, table, ta /* point entry in root table to sub-table */ low = huff & mask; /* - * table.op[low] = curr; table.bits[low] = root; table.val[low] = next - - * opts.table_index; - */ + * table.op[low] = curr; table.bits[low] = root; table.val[low] = next - + * opts.table_index; + */ table[low] = (root << 24) | (curr << 16) | (next - table_index) |0; } } /* - * fill in remaining table entry if code is incomplete (guaranteed to have - * at most one remaining entry, since if the code is incomplete, the maximum - * code length that was allowed to get this far is one bit) - */ + * fill in remaining table entry if code is incomplete (guaranteed to have + * at most one remaining entry, since if the code is incomplete, the maximum + * code length that was allowed to get this far is one bit) + */ if (huff !== 0) { // table.op[next + huff] = 64; /* invalid code marker */ // table.bits[next + huff] = len - drop; @@ -5217,9 +5216,9 @@ function gen_bitlen(s, desc) } /* - * In a first pass, compute the optimal bit lengths (which may overflow in - * the case of the bit length tree). - */ + * In a first pass, compute the optimal bit lengths (which may overflow in + * the case of the bit length tree). + */ tree[s.heap[s.heap_max] * 2 + 1]/* .Len */ = 0; /* root of the heap */ for (h = s.heap_max + 1; h < HEAP_SIZE; h++) { @@ -5258,18 +5257,18 @@ function gen_bitlen(s, desc) s.bl_count[bits + 1] += 2; /* move one overflow item as its brother */ s.bl_count[max_length]--; /* - * The brother of the overflow item also moves one step up, but this does - * not affect bl_count[max_length] - */ + * The brother of the overflow item also moves one step up, but this does + * not affect bl_count[max_length] + */ overflow -= 2; } while (overflow > 0); /* - * Now recompute all bit lengths, scanning in increasing frequency. h is - * still equal to HEAP_SIZE. (It is simpler to reconstruct all lengths - * instead of fixing only the wrong ones. This idea is taken from 'ar' - * written by Haruhiko Okumura.) - */ + * Now recompute all bit lengths, scanning in increasing frequency. h is + * still equal to HEAP_SIZE. (It is simpler to reconstruct all lengths + * instead of fixing only the wrong ones. This idea is taken from 'ar' + * written by Haruhiko Okumura.) + */ for (bits = max_length; bits !== 0; bits--) { n = s.bl_count[bits]; while (n !== 0) { @@ -5300,24 +5299,24 @@ function gen_codes(tree, max_code, bl_count) // ushf *bl_count; /* number of codes at each bit length */ { var next_code = new Array(MAX_BITS + 1); /* - * next code value for each bit - * length - */ + * next code value for each bit + * length + */ var code = 0; /* running code value */ var bits; /* bit index */ var n; /* code index */ /* - * The distribution counts are first used to generate the code values - * without bit reversal. - */ + * The distribution counts are first used to generate the code values + * without bit reversal. + */ for (bits = 1; bits <= MAX_BITS; bits++) { next_code[bits] = code = (code + bl_count[bits - 1]) << 1; } /* - * Check that the bit counts in bl_count are consistent. The last code must - * be all ones. - */ + * Check that the bit counts in bl_count are consistent. The last code must + * be all ones. + */ // Assert (code + bl_count[MAX_BITS]-1 == (1< dist code (0..29) */ @@ -5419,9 +5418,9 @@ function tr_static_init() { bl_count[8]++; } /* - * Codes 286 and 287 do not exist, but we must include them in the tree - * construction to get a canonical Huffman tree (longest code all ones) - */ + * Codes 286 and 287 do not exist, but we must include them in the tree + * construction to get a canonical Huffman tree (longest code all ones) + */ gen_codes(static_ltree, L_CODES + 1, bl_count); /* The static distance tree is trivial: */ @@ -5624,10 +5623,10 @@ function build_tree(s, desc) var node; /* new node being created */ /* - * Construct the initial heap, with least frequent element in - * heap[SMALLEST]. The sons of heap[n] are heap[2*n] and heap[2*n+1]. - * heap[0] is not used. - */ + * Construct the initial heap, with least frequent element in + * heap[SMALLEST]. The sons of heap[n] are heap[2*n] and heap[2*n+1]. + * heap[0] is not used. + */ s.heap_len = 0; s.heap_max = HEAP_SIZE; @@ -5642,11 +5641,11 @@ function build_tree(s, desc) } /* - * The pkzip format requires that at least one distance code exists, and - * that at least one bit should be sent even if there is only one possible - * code. So to avoid special checks later on we force at least two codes of - * non zero frequency. - */ + * The pkzip format requires that at least one distance code exists, and + * that at least one bit should be sent even if there is only one possible + * code. So to avoid special checks later on we force at least two codes of + * non zero frequency. + */ while (s.heap_len < 2) { node = s.heap[++s.heap_len] = (max_code < 2 ? ++max_code : 0); tree[node * 2]/* .Freq */ = 1; @@ -5661,15 +5660,15 @@ function build_tree(s, desc) desc.max_code = max_code; /* - * The elements heap[heap_len/2+1 .. heap_len] are leaves of the tree, - * establish sub-heaps of increasing lengths: - */ + * The elements heap[heap_len/2+1 .. heap_len] are leaves of the tree, + * establish sub-heaps of increasing lengths: + */ for (n = (s.heap_len >> 1/* int /2 */); n >= 1; n--) { pqdownheap(s, tree, n); } /* - * Construct the Huffman tree by repeatedly combining the least two frequent - * nodes. - */ + * Construct the Huffman tree by repeatedly combining the least two frequent + * nodes. + */ node = elems; /* next internal node of the tree */ do { // pqremove(s, tree, n); /* n = node of least frequency */ @@ -5698,9 +5697,9 @@ function build_tree(s, desc) s.heap[--s.heap_max] = s.heap[1/* SMALLEST */]; /* - * At this point, the fields freq and dad are set. We can now generate the - * bit lengths. - */ + * At this point, the fields freq and dad are set. We can now generate the + * bit lengths. + */ gen_bitlen(s, desc); /* The field len is now set, we can generate the bit codes */ @@ -5862,15 +5861,15 @@ function build_bl_tree(s) { /* Build the bit length tree: */ build_tree(s, s.bl_desc); /* - * opt_len now includes the length of the tree representations, except the - * lengths of the bit lengths codes and the 5+5+4 bits for the counts. - */ + * opt_len now includes the length of the tree representations, except the + * lengths of the bit lengths codes and the 5+5+4 bits for the counts. + */ /* - * Determine the number of bit length codes to send. The pkzip format - * requires that at least 4 bit length codes be sent. (appnote.txt says 3 - * but the actual value used is 4.) - */ + * Determine the number of bit length codes to send. The pkzip format + * requires that at least 4 bit length codes be sent. (appnote.txt says 3 + * but the actual value used is 4.) + */ for (max_blindex = BL_CODES - 1; max_blindex >= 3; max_blindex--) { if (s.bl_tree[bl_order[max_blindex] * 2 + 1]/* .Len */ !== 0) { break; @@ -5932,9 +5931,9 @@ function send_all_trees(s, lcodes, dcodes, blcodes) */ function detect_data_type(s) { /* - * black_mask is the bit mask of black-listed bytes set bits 0..6, 14..25, - * and 28..31 0xf3ffc07f = binary 11110011111111111100000001111111 - */ + * black_mask is the bit mask of black-listed bytes set bits 0..6, 14..25, + * and 28..31 0xf3ffc07f = binary 11110011111111111100000001111111 + */ var black_mask = 0xf3ffc07f; var n; @@ -5957,9 +5956,9 @@ function detect_data_type(s) { } /* - * There are no "black-listed" or "white-listed" bytes: this stream either - * is empty or has tolerated ("gray-listed") bytes only. - */ + * There are no "black-listed" or "white-listed" bytes: this stream either + * is empty or has tolerated ("gray-listed") bytes only. + */ return Z_BINARY; } @@ -6030,9 +6029,9 @@ function _tr_flush_block(s, buf, stored_len, last) { var opt_lenb, static_lenb; /* opt_len and static_len in bytes */ var max_blindex = 0; /* - * index of last bit length code of non zero - * freq - */ + * index of last bit length code of non zero + * freq + */ /* Build the Huffman trees unless a stored block is forced */ if (s.level > 0) { @@ -6051,14 +6050,14 @@ function _tr_flush_block(s, buf, stored_len, last) // Tracev((stderr, "\ndist data: dyn %ld, stat %ld", s->opt_len, // s->static_len)); /* - * At this point, opt_len and static_len are the total bit lengths of the - * compressed block data, excluding the tree representations. - */ + * At this point, opt_len and static_len are the total bit lengths of the + * compressed block data, excluding the tree representations. + */ /* - * Build the bit length tree for the above two trees, and get the index in - * bl_order of the last bit length code to send. - */ + * Build the bit length tree for the above two trees, and get the index in + * bl_order of the last bit length code to send. + */ max_blindex = build_bl_tree(s); /* Determine the best encoding. Compute the block lengths in bytes. */ @@ -6080,11 +6079,11 @@ function _tr_flush_block(s, buf, stored_len, last) /* 4: two words for the lengths */ /* - * The test buf != NULL is only necessary if LIT_BUFSIZE > WSIZE. Otherwise - * we can't have processed more than WSIZE input bytes since the last block - * flush, because compression would have been successful. If LIT_BUFSIZE <= - * WSIZE, it is never too late to transform a block into a stored block. - */ + * The test buf != NULL is only necessary if LIT_BUFSIZE > WSIZE. Otherwise + * we can't have processed more than WSIZE input bytes since the last block + * flush, because compression would have been successful. If LIT_BUFSIZE <= + * WSIZE, it is never too late to transform a block into a stored block. + */ _tr_stored_block(s, buf, stored_len, last); } else if (s.strategy === Z_FIXED || static_lenb === opt_lenb) { @@ -6099,9 +6098,9 @@ function _tr_flush_block(s, buf, stored_len, last) } // Assert (s->compressed_len == s->bits_sent, "bad compressed size"); /* - * The above check is made mod 2^32, for files larger than 512 MB and uLong - * implemented on 32 bits. - */ + * The above check is made mod 2^32, for files larger than 512 MB and uLong + * implemented on 32 bits. + */ init_block(s); if (last) { @@ -6170,9 +6169,9 @@ function _tr_tally(s, dist, lc) return (s.last_lit === s.lit_bufsize - 1); /* - * We avoid equality with lit_bufsize because of wraparound at 64K on 16 bit - * machines and because stored blocks are restricted to 64K-1 bytes. - */ + * We avoid equality with lit_bufsize because of wraparound at 64K on 16 bit + * machines and because stored blocks are restricted to 64K-1 bytes. + */ } exports._tr_init = _tr_init; @@ -13936,9 +13935,9 @@ RawEncoder.prototype._flush = function (cb) { * * @param schema * @param opts - * {Object} - * + `blockSize`, uncompressed. + `codec` + `codecs` + `noCheck` + - * `omitHeader`, useful to append to an existing block file. + * {Object} + `blockSize`, uncompressed. + `codec` + `codecs` + + * `noCheck` + `omitHeader`, useful to append to an existing block + * file. */ function BlockEncoder(schema, opts) { opts = opts || {}; @@ -16805,20 +16804,20 @@ function assembleProtocol(fpath, opts, cb) { /** * Convenience function to parse multiple inputs into protocols and schemas. * - * It should cover most basic use-cases but has a few limitations: - * + It doesn't allow passing options to the parsing step. + The protocol/type - * inference logic can be deceived. + * It should cover most basic use-cases but has a few limitations: + It doesn't + * allow passing options to the parsing step. + The protocol/type inference + * logic can be deceived. * - * The parsing logic is as follows: - * + If `str` contains `path.sep` (on windows `\`, otherwise `/`) and is a path - * to an existing file, it will first be read as JSON, then as an IDL - * specification if JSON parsing failed. If either succeeds, the result is - * returned, otherwise the next steps are run using the file's content instead - * of the input path. + If `str` is a valid JSON string, it is parsed then - * returned. + If `str` is a valid IDL protocol specification, it is parsed and - * returned if no imports are present (and an error is thrown if there are any - * imports). + If `str` is a valid IDL type specification, it is parsed and - * returned. + If neither of the above cases apply, `str` is returned. + * The parsing logic is as follows: + If `str` contains `path.sep` (on windows + * `\`, otherwise `/`) and is a path to an existing file, it will first be read + * as JSON, then as an IDL specification if JSON parsing failed. If either + * succeeds, the result is returned, otherwise the next steps are run using the + * file's content instead of the input path. + If `str` is a valid JSON string, + * it is parsed then returned. + If `str` is a valid IDL protocol specification, + * it is parsed and returned if no imports are present (and an error is thrown + * if there are any imports). + If `str` is a valid IDL type specification, it + * is parsed and returned. + If neither of the above cases apply, `str` is + * returned. */ function read(str) { var schema; @@ -17172,12 +17171,12 @@ Reader.prototype._readImports = function (imports, maybeMessage) { /** * Simple class to split an input string into tokens. * - * There are different types of tokens, characterized by their `id`: - * + `number` numbers. + `name` references. + `string` double-quoted. + - * `operator`, anything else, always single character. + `javadoc`, only emitted - * when `next` is called with `emitJavadoc` set. + `json`, only emitted when - * `next` is called with `'json'` as `id` (the tokenizer doesn't have enough - * context to predict these). + * There are different types of tokens, characterized by their `id`: + `number` + * numbers. + `name` references. + `string` double-quoted. + `operator`, + * anything else, always single character. + `javadoc`, only emitted when `next` + * is called with `emitJavadoc` set. + `json`, only emitted when `next` is + * called with `'json'` as `id` (the tokenizer doesn't have enough context to + * predict these). */ function Tokenizer(str) { this._str = str; @@ -17437,9 +17436,9 @@ var LOGICAL_TYPE = null; * * This class' constructor will register any named types to support recursive * schemas. All type values are represented in memory similarly to their JSON - * representation, except for: - * + `bytes` and `fixed` which are represented as `Buffer`s. + `union`s which - * will be "unwrapped" unless the `wrapUnions` option is set. + * representation, except for: + `bytes` and `fixed` which are represented as + * `Buffer`s. + `union`s which will be "unwrapped" unless the `wrapUnions` + * option is set. * * See individual subclasses for details. */ @@ -18576,9 +18575,8 @@ UnionType.prototype.getTypes = function () { return this.types; }; * number types are in the union). * * Currently, this union supports at most one type in each of the categories - * below: - * + `null` + `boolean` + `int`, `long`, `float`, `double` + `string`, `enum` + - * `bytes`, `fixed` + `array` + `map`, `record` + * below: + `null` + `boolean` + `int`, `long`, `float`, `double` + `string`, + * `enum` + `bytes`, `fixed` + `array` + `map`, `record` */ function UnwrappedUnionType(schema, opts) { UnionType.call(this, schema, opts); @@ -18763,15 +18761,15 @@ UnwrappedUnionType.prototype.random = function () { * contained type). * * This is not ideal, but is the most efficient way to unambiguously support all - * unions. Here are a few reasons why the wrapping object is necessary: - * + Unions with multiple number types would have undefined behavior, unless - * numbers are wrapped (either everywhere, leading to large performance and - * convenience costs; or only when necessary inside unions, making it hard to - * understand when numbers are wrapped or not). + Fixed types would have to be - * wrapped to be distinguished from bytes. + Using record's constructor names - * would work (after a slight change to use the fully qualified name), but would - * mean that generic objects could no longer be valid records (making it - * inconvenient to do simple things like creating new records). + * unions. Here are a few reasons why the wrapping object is necessary: + Unions + * with multiple number types would have undefined behavior, unless numbers are + * wrapped (either everywhere, leading to large performance and convenience + * costs; or only when necessary inside unions, making it hard to understand + * when numbers are wrapped or not). + Fixed types would have to be wrapped to + * be distinguished from bytes. + Using record's constructor names would work + * (after a slight change to use the fully qualified name), but would mean that + * generic objects could no longer be valid records (making it inconvenient to + * do simple things like creating new records). */ function WrappedUnionType(schema, opts) { UnionType.call(this, schema, opts); @@ -20284,9 +20282,9 @@ function readArraySize(tap) { * @param n * {Number} The number. * - * Two things to note: - * + We are not using the `Number` constants for compatibility with older - * browsers. + We must remove one from each bound because of rounding errors. + * Two things to note: + We are not using the `Number` constants for + * compatibility with older browsers. + We must remove one from each bound + * because of rounding errors. */ function isSafeLong(n) { return n >= -9007199254740990 && n <= 9007199254740990; diff --git a/client/client-monitoring/src/main/resources/webapp/js/jquery/jquery-1.12.4.js b/client/client-monitoring/src/main/resources/webapp/js/jquery/jquery-1.12.4.js deleted file mode 100644 index 13ca4772b..000000000 --- a/client/client-monitoring/src/main/resources/webapp/js/jquery/jquery-1.12.4.js +++ /dev/null @@ -1,13201 +0,0 @@ -/*! - * jQuery JavaScript Library v1.12.4 - * http://jquery.com/ - * - * Includes Sizzle.js - * http://sizzlejs.com/ - * - * Copyright jQuery Foundation and other contributors - * Released under the MIT license - * http://jquery.org/license - * - * Date: 2016-05-20T17:17Z - */ - -(function(global, factory) { - - if (typeof module === "object" && typeof module.exports === "object") { - // For CommonJS and CommonJS-like environments where a proper `window` - // is present, execute the factory and get jQuery. - // For environments that do not have a `window` with a `document` - // (such as Node.js), expose a factory as module.exports. - // This accentuates the need for the creation of a real `window`. - // e.g. var jQuery = require("jquery")(window); - // See ticket #14549 for more info. - module.exports = global.document ? factory(global, true) : function(w) { - if (!w.document) { - throw new Error("jQuery requires a window with a document"); - } - return factory(w); - }; - } else { - factory(global); - } - - // Pass this if window is not defined yet -} - ( - typeof window !== "undefined" ? window : this, - function(window, noGlobal) { - - // Support: Firefox 18+ - // Can't be in strict mode, several libs including ASP.NET - // trace - // the stack via arguments.caller.callee and Firefox dies if - // you try to trace through "use strict" call chains. - // (#13335) - // "use strict"; - var deletedIds = []; - - var document = window.document; - - var slice = deletedIds.slice; - - var concat = deletedIds.concat; - - var push = deletedIds.push; - - var indexOf = deletedIds.indexOf; - - var class2type = {}; - - var toString = class2type.toString; - - var hasOwn = class2type.hasOwnProperty; - - var support = {}; - - var version = "1.12.4", - - // Define a local copy of jQuery - jQuery = function(selector, context) { - - // The jQuery object is actually just the init - // constructor 'enhanced' - // Need init if jQuery is called (just allow error to be - // thrown if not included) - return new jQuery.fn.init(selector, context); - }, - - // Support: Android<4.1, IE<9 - // Make sure we trim BOM and NBSP - rtrim = /^[\s\uFEFF\xA0]+|[\s\uFEFF\xA0]+$/g, - - // Matches dashed string for camelizing - rmsPrefix = /^-ms-/, rdashAlpha = /-([\da-z])/gi, - - // Used by jQuery.camelCase as callback to replace() - fcamelCase = function(all, letter) { - return letter.toUpperCase(); - }; - - jQuery.fn = jQuery.prototype = { - - // The current version of jQuery being used - jquery : version, - - constructor : jQuery, - - // Start with an empty selector - selector : "", - - // The default length of a jQuery object is 0 - length : 0, - - toArray : function() { - return slice.call(this); - }, - - // Get the Nth element in the matched element set OR - // Get the whole matched element set as a clean array - get : function(num) { - return num != null ? - - // Return just the one element from the set - (num < 0 ? this[num + this.length] : this[num]) : - - // Return all the elements in a clean array - slice.call(this); - }, - - // Take an array of elements and push it onto the stack - // (returning the new matched element set) - pushStack : function(elems) { - - // Build a new jQuery matched element set - var ret = jQuery.merge(this.constructor(), elems); - - // Add the old object onto the stack (as a - // reference) - ret.prevObject = this; - ret.context = this.context; - - // Return the newly-formed element set - return ret; - }, - - // Execute a callback for every element in the matched - // set. - each : function(callback) { - return jQuery.each(this, callback); - }, - - map : function(callback) { - return this.pushStack(jQuery.map(this, function( - elem, i) { - return callback.call(elem, i, elem); - })); - }, - - slice : function() { - return this.pushStack(slice.apply(this, arguments)); - }, - - first : function() { - return this.eq(0); - }, - - last : function() { - return this.eq(-1); - }, - - eq : function(i) { - var len = this.length, j = +i + (i < 0 ? len : 0); - return this - .pushStack(j >= 0 && j < len ? [ this[j] ] - : []); - }, - - end : function() { - return this.prevObject || this.constructor(); - }, - - // For internal use only. - // Behaves like an Array's method, not like a jQuery - // method. - push : push, - sort : deletedIds.sort, - splice : deletedIds.splice - }; - - jQuery.extend = jQuery.fn.extend = function() { - var src, copyIsArray, copy, name, options, clone, target = arguments[0] - || {}, i = 1, length = arguments.length, deep = false; - - // Handle a deep copy situation - if (typeof target === "boolean") { - deep = target; - - // skip the boolean and the target - target = arguments[i] || {}; - i++; - } - - // Handle case when target is a string or something - // (possible in deep copy) - if (typeof target !== "object" - && !jQuery.isFunction(target)) { - target = {}; - } - - // extend jQuery itself if only one argument is passed - if (i === length) { - target = this; - i--; - } - - for (; i < length; i++) { - - // Only deal with non-null/undefined values - if ((options = arguments[i]) != null) { - - // Extend the base object - for (name in options) { - src = target[name]; - copy = options[name]; - - // Prevent never-ending loop - if (target === copy) { - continue; - } - - // Recurse if we're merging plain objects or - // arrays - if (deep - && copy - && (jQuery.isPlainObject(copy) || (copyIsArray = jQuery - .isArray(copy)))) { - - if (copyIsArray) { - copyIsArray = false; - clone = src && jQuery.isArray(src) ? src - : []; - - } else { - clone = src - && jQuery - .isPlainObject(src) ? src - : {}; - } - - // Never move original objects, clone - // them - target[name] = jQuery.extend(deep, - clone, copy); - - // Don't bring in undefined values - } else if (copy !== undefined) { - target[name] = copy; - } - } - } - } - - // Return the modified object - return target; - }; - - jQuery - .extend({ - - // Unique for each copy of jQuery on the page - expando : "jQuery" - + (version + Math.random()).replace( - /\D/g, ""), - - // Assume jQuery is ready without the ready - // module - isReady : true, - - error : function(msg) { - throw new Error(msg); - }, - - noop : function() { - }, - - // See test/unit/core.js for details concerning - // isFunction. - // Since version 1.3, DOM methods and functions - // like alert - // aren't supported. They return false on IE - // (#2968). - isFunction : function(obj) { - return jQuery.type(obj) === "function"; - }, - - isArray : Array.isArray || function(obj) { - return jQuery.type(obj) === "array"; - }, - - isWindow : function(obj) { - /* jshint eqeqeq: false */ - return obj != null && obj == obj.window; - }, - - isNumeric : function(obj) { - - // parseFloat NaNs numeric-cast false - // positives (null|true|false|"") - // ...but misinterprets leading-number - // strings, particularly hex literals - // ("0x...") - // subtraction forces infinities to NaN - // adding 1 corrects loss of precision from - // parseFloat (#15100) - var realStringObj = obj && obj.toString(); - return !jQuery.isArray(obj) - && (realStringObj - - parseFloat(realStringObj) + 1) >= 0; - }, - - isEmptyObject : function(obj) { - var name; - for (name in obj) { - return false; - } - return true; - }, - - isPlainObject : function(obj) { - var key; - - // Must be an Object. - // Because of IE, we also have to check the - // presence of the constructor property. - // Make sure that DOM nodes and window - // objects don't pass through, as well - if (!obj || jQuery.type(obj) !== "object" - || obj.nodeType - || jQuery.isWindow(obj)) { - return false; - } - - try { - - // Not own constructor property must be - // Object - if (obj.constructor - && !hasOwn.call(obj, - "constructor") - && !hasOwn - .call( - obj.constructor.prototype, - "isPrototypeOf")) { - return false; - } - } catch (e) { - - // IE8,9 Will throw exceptions on - // certain host objects #9897 - return false; - } - - // Support: IE<9 - // Handle iteration over inherited - // properties before own properties. - if (!support.ownFirst) { - for (key in obj) { - return hasOwn.call(obj, key); - } - } - - // Own properties are enumerated firstly, so - // to speed up, - // if last one is own, then all properties - // are own. - for (key in obj) { - } - - return key === undefined - || hasOwn.call(obj, key); - }, - - type : function(obj) { - if (obj == null) { - return obj + ""; - } - return typeof obj === "object" - || typeof obj === "function" ? class2type[toString - .call(obj)] - || "object" - : typeof obj; - }, - - // Workarounds based on findings by Jim Driscoll - // http://weblogs.java.net/blog/driscoll/archive/2009/09/08/eval-javascript-global-context - globalEval : function(data) { - if (data && jQuery.trim(data)) { - - // We use execScript on Internet - // Explorer - // We use an anonymous function so that - // context is window - // rather than jQuery in Firefox - (window.execScript || function(data) { - window["eval"].call(window, data); // jscs:ignore - // requireDotNotation - })(data); - } - }, - - // Convert dashed to camelCase; used by the css - // and data modules - // Microsoft forgot to hump their vendor prefix - // (#9572) - camelCase : function(string) { - return string.replace(rmsPrefix, "ms-") - .replace(rdashAlpha, fcamelCase); - }, - - nodeName : function(elem, name) { - return elem.nodeName - && elem.nodeName.toLowerCase() === name - .toLowerCase(); - }, - - each : function(obj, callback) { - var length, i = 0; - - if (isArrayLike(obj)) { - length = obj.length; - for (; i < length; i++) { - if (callback - .call(obj[i], i, obj[i]) === false) { - break; - } - } - } else { - for (i in obj) { - if (callback - .call(obj[i], i, obj[i]) === false) { - break; - } - } - } - - return obj; - }, - - // Support: Android<4.1, IE<9 - trim : function(text) { - return text == null ? "" : (text + "") - .replace(rtrim, ""); - }, - - // results is for internal usage only - makeArray : function(arr, results) { - var ret = results || []; - - if (arr != null) { - if (isArrayLike(Object(arr))) { - jQuery - .merge( - ret, - typeof arr === "string" ? [ arr ] - : arr); - } else { - push.call(ret, arr); - } - } - - return ret; - }, - - inArray : function(elem, arr, i) { - var len; - - if (arr) { - if (indexOf) { - return indexOf.call(arr, elem, i); - } - - len = arr.length; - i = i ? i < 0 ? Math.max(0, len + i) - : i : 0; - - for (; i < len; i++) { - - // Skip accessing in sparse arrays - if (i in arr && arr[i] === elem) { - return i; - } - } - } - - return -1; - }, - - merge : function(first, second) { - var len = +second.length, j = 0, i = first.length; - - while (j < len) { - first[i++] = second[j++]; - } - - // Support: IE<9 - // Workaround casting of .length to NaN on - // otherwise arraylike objects (e.g., - // NodeLists) - if (len !== len) { - while (second[j] !== undefined) { - first[i++] = second[j++]; - } - } - - first.length = i; - - return first; - }, - - grep : function(elems, callback, invert) { - var callbackInverse, matches = [], i = 0, length = elems.length, callbackExpect = !invert; - - // Go through the array, only saving the - // items - // that pass the validator function - for (; i < length; i++) { - callbackInverse = !callback(elems[i], i); - if (callbackInverse !== callbackExpect) { - matches.push(elems[i]); - } - } - - return matches; - }, - - // arg is for internal usage only - map : function(elems, callback, arg) { - var length, value, i = 0, ret = []; - - // Go through the array, translating each of - // the items to their new values - if (isArrayLike(elems)) { - length = elems.length; - for (; i < length; i++) { - value = callback(elems[i], i, arg); - - if (value != null) { - ret.push(value); - } - } - - // Go through every key on the object, - } else { - for (i in elems) { - value = callback(elems[i], i, arg); - - if (value != null) { - ret.push(value); - } - } - } - - // Flatten any nested arrays - return concat.apply([], ret); - }, - - // A global GUID counter for objects - guid : 1, - - // Bind a function to a context, optionally - // partially applying any - // arguments. - proxy : function(fn, context) { - var args, proxy, tmp; - - if (typeof context === "string") { - tmp = fn[context]; - context = fn; - fn = tmp; - } - - // Quick check to determine if target is - // callable, in the spec - // this throws a TypeError, but we will just - // return undefined. - if (!jQuery.isFunction(fn)) { - return undefined; - } - - // Simulated bind - args = slice.call(arguments, 2); - proxy = function() { - return fn.apply(context || this, args - .concat(slice.call(arguments))); - }; - - // Set the guid of unique handler to the - // same of original handler, so it can be - // removed - proxy.guid = fn.guid = fn.guid - || jQuery.guid++; - - return proxy; - }, - - now : function() { - return +(new Date()); - }, - - // jQuery.support is not used in Core but other - // projects attach their - // properties to it so it needs to exist. - support : support - }); - - // JSHint would error on this code due to the Symbol not - // being defined in ES5. - // Defining this global in .jshintrc would create a danger - // of using the global - // unguarded in another place, it seems safer to just - // disable JSHint for these - // three lines. - /* jshint ignore: start */ - if (typeof Symbol === "function") { - jQuery.fn[Symbol.iterator] = deletedIds[Symbol.iterator]; - } - /* jshint ignore: end */ - - // Populate the class2type map - jQuery.each( - "Boolean Number String Function Array Date RegExp Object Error Symbol" - .split(" "), function(i, name) { - class2type["[object " + name + "]"] = name - .toLowerCase(); - }); - - function isArrayLike(obj) { - - // Support: iOS 8.2 (not reproducible in simulator) - // `in` check used to prevent JIT error (gh-2145) - // hasOwn isn't used here due to false negatives - // regarding Nodelist length in IE - var length = !!obj && "length" in obj && obj.length, type = jQuery - .type(obj); - - if (type === "function" || jQuery.isWindow(obj)) { - return false; - } - - return type === "array" || length === 0 - || typeof length === "number" && length > 0 - && (length - 1) in obj; - } - var Sizzle = - /* - * ! Sizzle CSS Selector Engine v2.2.1 http://sizzlejs.com/ - * - * Copyright jQuery Foundation and other contributors - * Released under the MIT license http://jquery.org/license - * - * Date: 2015-10-17 - */ - (function(window) { - - var i, support, Expr, getText, isXML, tokenize, compile, select, outermostContext, sortInput, hasDuplicate, - - // Local document vars - setDocument, document, docElem, documentIsHTML, rbuggyQSA, rbuggyMatches, matches, contains, - - // Instance-specific data - expando = "sizzle" + 1 * new Date(), preferredDoc = window.document, dirruns = 0, done = 0, classCache = createCache(), tokenCache = createCache(), compilerCache = createCache(), sortOrder = function( - a, b) { - if (a === b) { - hasDuplicate = true; - } - return 0; - }, - - // General-purpose constants - MAX_NEGATIVE = 1 << 31, - - // Instance methods - hasOwn = ({}).hasOwnProperty, arr = [], pop = arr.pop, push_native = arr.push, push = arr.push, slice = arr.slice, - // Use a stripped-down indexOf as it's faster than - // native - // http://jsperf.com/thor-indexof-vs-for/5 - indexOf = function(list, elem) { - var i = 0, len = list.length; - for (; i < len; i++) { - if (list[i] === elem) { - return i; - } - } - return -1; - }, - - booleans = "checked|selected|async|autofocus|autoplay|controls|defer|disabled|hidden|ismap|loop|multiple|open|readonly|required|scoped", - - // Regular expressions - - // http://www.w3.org/TR/css3-selectors/#whitespace - whitespace = "[\\x20\\t\\r\\n\\f]", - - // http://www.w3.org/TR/CSS21/syndata.html#value-def-identifier - identifier = "(?:\\\\.|[\\w-]|[^\\x00-\\xa0])+", - - // Attribute selectors: - // http://www.w3.org/TR/selectors/#attribute-selectors - attributes = "\\[" + whitespace + "*(" + identifier - + ")(?:" + whitespace + - // Operator (capture 2) - "*([*^$|!~]?=)" + whitespace + - // "Attribute values must be CSS identifiers - // [capture 5] or strings [capture 3 or capture - // 4]" - "*(?:'((?:\\\\.|[^\\\\'])*)'|\"((?:\\\\.|[^\\\\\"])*)\"|(" - + identifier + "))|)" + whitespace + "*\\]", - - pseudos = ":(" + identifier + ")(?:\\((" + - // To reduce the number of selectors needing tokenize in - // the preFilter, prefer arguments: - // 1. quoted (capture 3; capture 4 or capture 5) - "('((?:\\\\.|[^\\\\'])*)'|\"((?:\\\\.|[^\\\\\"])*)\")|" - + - // 2. simple (capture 6) - "((?:\\\\.|[^\\\\()[\\]]|" + attributes - + ")*)|" + - // 3. anything else (capture 2) - ".*" + ")\\)|)", - - // Leading and non-escaped trailing whitespace, - // capturing some non-whitespace characters preceding - // the latter - rwhitespace = new RegExp(whitespace + "+", "g"), rtrim = new RegExp( - "^" + whitespace - + "+|((?:^|[^\\\\])(?:\\\\.)*)" - + whitespace + "+$", "g"), - - rcomma = new RegExp("^" + whitespace + "*," - + whitespace + "*"), rcombinators = new RegExp( - "^" + whitespace + "*([>+~]|" + whitespace - + ")" + whitespace + "*"), - - rattributeQuotes = new RegExp("=" + whitespace - + "*([^\\]'\"]*?)" + whitespace + "*\\]", "g"), - - rpseudo = new RegExp(pseudos), ridentifier = new RegExp( - "^" + identifier + "$"), - - matchExpr = { - "ID" : new RegExp("^#(" + identifier + ")"), - "CLASS" : new RegExp("^\\.(" + identifier + ")"), - "TAG" : new RegExp("^(" + identifier + "|[*])"), - "ATTR" : new RegExp("^" + attributes), - "PSEUDO" : new RegExp("^" + pseudos), - "CHILD" : new RegExp( - "^:(only|first|last|nth|nth-last)-(child|of-type)(?:\\(" - + whitespace - + "*(even|odd|(([+-]|)(\\d*)n|)" - + whitespace + "*(?:([+-]|)" - + whitespace + "*(\\d+)|))" - + whitespace + "*\\)|)", "i"), - "bool" : new RegExp("^(?:" + booleans + ")$", "i"), - // For use in libraries implementing .is() - // We use this for POS matching in `select` - "needsContext" : new RegExp( - "^" - + whitespace - + "*[>+~]|:(even|odd|eq|gt|lt|nth|first|last)(?:\\(" - + whitespace + "*((?:-\\d)?\\d*)" - + whitespace + "*\\)|)(?=[^-]|$)", - "i") - }, - - rinputs = /^(?:input|select|textarea|button)$/i, rheader = /^h\d$/i, - - rnative = /^[^{]+\{\s*\[native \w/, - - // Easily-parseable/retrievable ID or TAG or CLASS - // selectors - rquickExpr = /^(?:#([\w-]+)|(\w+)|\.([\w-]+))$/, - - rsibling = /[+~]/, rescape = /'|\\/g, - - // CSS escapes - // http://www.w3.org/TR/CSS21/syndata.html#escaped-characters - runescape = new RegExp("\\\\([\\da-f]{1,6}" - + whitespace + "?|(" + whitespace + ")|.)", - "ig"), funescape = function(_, escaped, - escapedWhitespace) { - var high = "0x" + escaped - 0x10000; - // NaN means non-codepoint - // Support: Firefox<24 - // Workaround erroneous numeric interpretation of - // +"0x" - return high !== high || escapedWhitespace ? escaped - : high < 0 ? - // BMP codepoint - String.fromCharCode(high + 0x10000) : - // Supplemental Plane codepoint (surrogate - // pair) - String.fromCharCode(high >> 10 | 0xD800, - high & 0x3FF | 0xDC00); - }, - - // Used for iframes - // See setDocument() - // Removing the function wrapper causes a "Permission - // Denied" - // error in IE - unloadHandler = function() { - setDocument(); - }; - - // Optimize for push.apply( _, NodeList ) - try { - push.apply((arr = slice - .call(preferredDoc.childNodes)), - preferredDoc.childNodes); - // Support: Android<4.0 - // Detect silently failing push.apply - arr[preferredDoc.childNodes.length].nodeType; - } catch (e) { - push = { - apply : arr.length ? - - // Leverage slice if possible - function(target, els) { - push_native.apply(target, slice.call(els)); - } : - - // Support: IE<9 - // Otherwise append directly - function(target, els) { - var j = target.length, i = 0; - // Can't trust NodeList.length - while ((target[j++] = els[i++])) { - } - target.length = j - 1; - } - }; - } - - function Sizzle(selector, context, results, seed) { - var m, i, elem, nid, nidselect, match, groups, newSelector, newContext = context - && context.ownerDocument, - - // nodeType defaults to 9, since context defaults to - // document - nodeType = context ? context.nodeType : 9; - - results = results || []; - - // Return early from calls with invalid selector or - // context - if (typeof selector !== "string" || !selector - || nodeType !== 1 && nodeType !== 9 - && nodeType !== 11) { - - return results; - } - - // Try to shortcut find operations (as opposed to - // filters) in HTML documents - if (!seed) { - - if ((context ? context.ownerDocument || context - : preferredDoc) !== document) { - setDocument(context); - } - context = context || document; - - if (documentIsHTML) { - - // If the selector is sufficiently simple, - // try using a "get*By*" DOM method - // (excepting DocumentFragment context, - // where the methods don't exist) - if (nodeType !== 11 - && (match = rquickExpr - .exec(selector))) { - - // ID selector - if ((m = match[1])) { - - // Document context - if (nodeType === 9) { - if ((elem = context - .getElementById(m))) { - - // Support: IE, Opera, - // Webkit - // TODO: identify versions - // getElementById can match - // elements by name instead - // of ID - if (elem.id === m) { - results.push(elem); - return results; - } - } else { - return results; - } - - // Element context - } else { - - // Support: IE, Opera, Webkit - // TODO: identify versions - // getElementById can match - // elements by name instead of - // ID - if (newContext - && (elem = newContext - .getElementById(m)) - && contains(context, - elem) - && elem.id === m) { - - results.push(elem); - return results; - } - } - - // Type selector - } else if (match[2]) { - push - .apply( - results, - context - .getElementsByTagName(selector)); - return results; - - // Class selector - } else if ((m = match[3]) - && support.getElementsByClassName - && context.getElementsByClassName) { - - push.apply(results, context - .getElementsByClassName(m)); - return results; - } - } - - // Take advantage of querySelectorAll - if (support.qsa - && !compilerCache[selector + " "] - && (!rbuggyQSA || !rbuggyQSA - .test(selector))) { - - if (nodeType !== 1) { - newContext = context; - newSelector = selector; - - // qSA looks outside Element - // context, which is not what we - // want - // Thanks to Andrew Dupont for this - // workaround technique - // Support: IE <=8 - // Exclude object elements - } else if (context.nodeName - .toLowerCase() !== "object") { - - // Capture the context ID, setting - // it first if necessary - if ((nid = context - .getAttribute("id"))) { - nid = nid.replace(rescape, - "\\$&"); - } else { - context.setAttribute("id", - (nid = expando)); - } - - // Prefix every selector in the list - groups = tokenize(selector); - i = groups.length; - nidselect = ridentifier.test(nid) ? "#" - + nid - : "[id='" + nid + "']"; - while (i--) { - groups[i] = nidselect + " " - + toSelector(groups[i]); - } - newSelector = groups.join(","); - - // Expand context for sibling - // selectors - newContext = rsibling - .test(selector) - && testContext(context.parentNode) - || context; - } - - if (newSelector) { - try { - push - .apply( - results, - newContext - .querySelectorAll(newSelector)); - return results; - } catch (qsaError) { - } finally { - if (nid === expando) { - context - .removeAttribute("id"); - } - } - } - } - } - } - - // All others - return select(selector.replace(rtrim, "$1"), - context, results, seed); - } - - /** - * Create key-value caches of limited size - * - * @returns {function(string, object)} Returns the - * Object data after storing it on itself with - * property name the (space-suffixed) string - * and (if the cache is larger than - * Expr.cacheLength) deleting the oldest entry - */ - function createCache() { - var keys = []; - - function cache(key, value) { - // Use (key + " ") to avoid collision with - // native prototype properties (see Issue #157) - if (keys.push(key + " ") > Expr.cacheLength) { - // Only keep the most recent entries - delete cache[keys.shift()]; - } - return (cache[key + " "] = value); - } - return cache; - } - - /** - * Mark a function for special use by Sizzle - * - * @param {Function} - * fn The function to mark - */ - function markFunction(fn) { - fn[expando] = true; - return fn; - } - - /** - * Support testing using an element - * - * @param {Function} - * fn Passed the created div and expects a - * boolean result - */ - function assert(fn) { - var div = document.createElement("div"); - - try { - return !!fn(div); - } catch (e) { - return false; - } finally { - // Remove from its parent by default - if (div.parentNode) { - div.parentNode.removeChild(div); - } - // release memory in IE - div = null; - } - } - - /** - * Adds the same handler for all of the specified attrs - * - * @param {String} - * attrs Pipe-separated list of attributes - * @param {Function} - * handler The method that will be applied - */ - function addHandle(attrs, handler) { - var arr = attrs.split("|"), i = arr.length; - - while (i--) { - Expr.attrHandle[arr[i]] = handler; - } - } - - /** - * Checks document order of two siblings - * - * @param {Element} - * a - * @param {Element} - * b - * @returns {Number} Returns less than 0 if a precedes - * b, greater than 0 if a follows b - */ - function siblingCheck(a, b) { - var cur = b && a, diff = cur && a.nodeType === 1 - && b.nodeType === 1 - && (~b.sourceIndex || MAX_NEGATIVE) - - (~a.sourceIndex || MAX_NEGATIVE); - - // Use IE sourceIndex if available on both nodes - if (diff) { - return diff; - } - - // Check if b follows a - if (cur) { - while ((cur = cur.nextSibling)) { - if (cur === b) { - return -1; - } - } - } - - return a ? 1 : -1; - } - - /** - * Returns a function to use in pseudos for input types - * - * @param {String} - * type - */ - function createInputPseudo(type) { - return function(elem) { - var name = elem.nodeName.toLowerCase(); - return name === "input" && elem.type === type; - }; - } - - /** - * Returns a function to use in pseudos for buttons - * - * @param {String} - * type - */ - function createButtonPseudo(type) { - return function(elem) { - var name = elem.nodeName.toLowerCase(); - return (name === "input" || name === "button") - && elem.type === type; - }; - } - - /** - * Returns a function to use in pseudos for positionals - * - * @param {Function} - * fn - */ - function createPositionalPseudo(fn) { - return markFunction(function(argument) { - argument = +argument; - return markFunction(function(seed, matches) { - var j, matchIndexes = fn([], seed.length, - argument), i = matchIndexes.length; - - // Match elements found at the specified - // indexes - while (i--) { - if (seed[(j = matchIndexes[i])]) { - seed[j] = !(matches[j] = seed[j]); - } - } - }); - }); - } - - /** - * Checks a node for validity as a Sizzle context - * - * @param {Element|Object=} - * context - * @returns {Element|Object|Boolean} The input node if - * acceptable, otherwise a falsy value - */ - function testContext(context) { - return context - && typeof context.getElementsByTagName !== "undefined" - && context; - } - - // Expose support vars for convenience - support = Sizzle.support = {}; - - /** - * Detects XML nodes - * - * @param {Element|Object} - * elem An element or a document - * @returns {Boolean} True iff elem is a non-HTML XML - * node - */ - isXML = Sizzle.isXML = function(elem) { - // documentElement is verified for cases where it - // doesn't yet exist - // (such as loading iframes in IE - #4833) - var documentElement = elem - && (elem.ownerDocument || elem).documentElement; - return documentElement ? documentElement.nodeName !== "HTML" - : false; - }; - - /** - * Sets document-related variables once based on the - * current document - * - * @param {Element|Object} - * [doc] An element or document object to use - * to set the document - * @returns {Object} Returns the current document - */ - setDocument = Sizzle.setDocument = function(node) { - var hasCompare, parent, doc = node ? node.ownerDocument - || node - : preferredDoc; - - // Return early if doc is invalid or already - // selected - if (doc === document || doc.nodeType !== 9 - || !doc.documentElement) { - return document; - } - - // Update global variables - document = doc; - docElem = document.documentElement; - documentIsHTML = !isXML(document); - - // Support: IE 9-11, Edge - // Accessing iframe documents after unload throws - // "permission denied" errors (jQuery #13936) - if ((parent = document.defaultView) - && parent.top !== parent) { - // Support: IE 11 - if (parent.addEventListener) { - parent.addEventListener("unload", - unloadHandler, false); - - // Support: IE 9 - 10 only - } else if (parent.attachEvent) { - parent.attachEvent("onunload", - unloadHandler); - } - } - - /* - * Attributes - * ---------------------------------------------------------------------- - */ - - // Support: IE<8 - // Verify that getAttribute really returns - // attributes and not properties - // (excepting IE8 booleans) - support.attributes = assert(function(div) { - div.className = "i"; - return !div.getAttribute("className"); - }); - - /*************************************************** - * getElement(s)By - * ---------------------------------------------------------------------- - */ - - // Check if getElementsByTagName("*") returns only - // elements - support.getElementsByTagName = assert(function(div) { - div.appendChild(document.createComment("")); - return !div.getElementsByTagName("*").length; - }); - - // Support: IE<9 - support.getElementsByClassName = rnative - .test(document.getElementsByClassName); - - // Support: IE<10 - // Check if getElementById returns elements by name - // The broken getElementById methods don't pick up - // programatically-set names, - // so use a roundabout getElementsByName test - support.getById = assert(function(div) { - docElem.appendChild(div).id = expando; - return !document.getElementsByName - || !document.getElementsByName(expando).length; - }); - - // ID find and filter - if (support.getById) { - Expr.find["ID"] = function(id, context) { - if (typeof context.getElementById !== "undefined" - && documentIsHTML) { - var m = context.getElementById(id); - return m ? [ m ] : []; - } - }; - Expr.filter["ID"] = function(id) { - var attrId = id.replace(runescape, - funescape); - return function(elem) { - return elem.getAttribute("id") === attrId; - }; - }; - } else { - // Support: IE6/7 - // getElementById is not reliable as a find - // shortcut - delete Expr.find["ID"]; - - Expr.filter["ID"] = function(id) { - var attrId = id.replace(runescape, - funescape); - return function(elem) { - var node = typeof elem.getAttributeNode !== "undefined" - && elem.getAttributeNode("id"); - return node && node.value === attrId; - }; - }; - } - - // Tag - Expr.find["TAG"] = support.getElementsByTagName ? function( - tag, context) { - if (typeof context.getElementsByTagName !== "undefined") { - return context.getElementsByTagName(tag); - - // DocumentFragment nodes don't have gEBTN - } else if (support.qsa) { - return context.querySelectorAll(tag); - } - } - : - - function(tag, context) { - var elem, tmp = [], i = 0, - // By happy coincidence, a (broken) - // gEBTN appears on DocumentFragment - // nodes too - results = context - .getElementsByTagName(tag); - - // Filter out possible comments - if (tag === "*") { - while ((elem = results[i++])) { - if (elem.nodeType === 1) { - tmp.push(elem); - } - } - - return tmp; - } - return results; - }; - - // Class - Expr.find["CLASS"] = support.getElementsByClassName - && function(className, context) { - if (typeof context.getElementsByClassName !== "undefined" - && documentIsHTML) { - return context - .getElementsByClassName(className); - } - }; - - /* - * QSA/matchesSelector - * ---------------------------------------------------------------------- - */ - - // QSA and matchesSelector support - // matchesSelector(:active) reports false when true - // (IE9/Opera 11.5) - rbuggyMatches = []; - - // qSa(:focus) reports false when true (Chrome 21) - // We allow this because of a bug in IE8/9 that - // throws an error - // whenever `document.activeElement` is accessed on - // an iframe - // So, we allow :focus to pass through QSA all the - // time to avoid the IE error - // See http://bugs.jquery.com/ticket/13378 - rbuggyQSA = []; - - if ((support.qsa = rnative - .test(document.querySelectorAll))) { - // Build QSA regex - // Regex strategy adopted from Diego Perini - assert(function(div) { - // Select is set to empty string on purpose - // This is to test IE's treatment of not - // explicitly - // setting a boolean content attribute, - // since its presence should be enough - // http://bugs.jquery.com/ticket/12359 - docElem.appendChild(div).innerHTML = "" - + ""; - - // Support: IE8, Opera 11-12.16 - // Nothing should be selected when empty - // strings follow ^= or $= or *= - // The test attribute must be unknown in - // Opera but "safe" for WinRT - // http://msdn.microsoft.com/en-us/library/ie/hh465388.aspx#attribute_section - if (div - .querySelectorAll("[msallowcapture^='']").length) { - rbuggyQSA.push("[*^$]=" + whitespace - + "*(?:''|\"\")"); - } - - // Support: IE8 - // Boolean attributes and "value" are not - // treated correctly - if (!div.querySelectorAll("[selected]").length) { - rbuggyQSA - .push("\\[" + whitespace - + "*(?:value|" - + booleans + ")"); - } - - // Support: Chrome<29, Android<4.4, - // Safari<7.0+, iOS<7.0+, PhantomJS<1.9.8+ - if (!div.querySelectorAll("[id~=" + expando - + "-]").length) { - rbuggyQSA.push("~="); - } - - // Webkit/Opera - :checked should return - // selected option elements - // http://www.w3.org/TR/2011/REC-css3-selectors-20110929/#checked - // IE8 throws error here and will not see - // later tests - if (!div.querySelectorAll(":checked").length) { - rbuggyQSA.push(":checked"); - } - - // Support: Safari 8+, iOS 8+ - // https://bugs.webkit.org/show_bug.cgi?id=136851 - // In-page `selector#id sibing-combinator - // selector` fails - if (!div.querySelectorAll("a#" + expando - + "+*").length) { - rbuggyQSA.push(".#.+[+~]"); - } - }); - - assert(function(div) { - // Support: Windows 8 Native Apps - // The type and name attributes are - // restricted during .innerHTML assignment - var input = document.createElement("input"); - input.setAttribute("type", "hidden"); - div.appendChild(input).setAttribute("name", - "D"); - - // Support: IE8 - // Enforce case-sensitivity of name - // attribute - if (div.querySelectorAll("[name=d]").length) { - rbuggyQSA.push("name" + whitespace - + "*[*^$|!~]?="); - } - - // FF 3.5 - :enabled/:disabled and hidden - // elements (hidden elements are still - // enabled) - // IE8 throws error here and will not see - // later tests - if (!div.querySelectorAll(":enabled").length) { - rbuggyQSA.push(":enabled", ":disabled"); - } - - // Opera 10-11 does not throw on post-comma - // invalid pseudos - div.querySelectorAll("*,:x"); - rbuggyQSA.push(",.*:"); - }); - } - - if ((support.matchesSelector = rnative - .test((matches = docElem.matches - || docElem.webkitMatchesSelector - || docElem.mozMatchesSelector - || docElem.oMatchesSelector - || docElem.msMatchesSelector)))) { - - assert(function(div) { - // Check to see if it's possible to do - // matchesSelector - // on a disconnected node (IE 9) - support.disconnectedMatch = matches.call( - div, "div"); - - // This should fail with an exception - // Gecko does not error, returns false - // instead - matches.call(div, "[s!='']:x"); - rbuggyMatches.push("!=", pseudos); - }); - } - - rbuggyQSA = rbuggyQSA.length - && new RegExp(rbuggyQSA.join("|")); - rbuggyMatches = rbuggyMatches.length - && new RegExp(rbuggyMatches.join("|")); - - /* - * Contains - * ---------------------------------------------------------------------- - */ - hasCompare = rnative - .test(docElem.compareDocumentPosition); - - // Element contains another - // Purposefully self-exclusive - // As in, an element does not contain itself - contains = hasCompare - || rnative.test(docElem.contains) ? function( - a, b) { - var adown = a.nodeType === 9 ? a.documentElement - : a, bup = b && b.parentNode; - return a === bup - || !!(bup && bup.nodeType === 1 && (adown.contains ? adown - .contains(bup) - : a.compareDocumentPosition - && a - .compareDocumentPosition(bup) - & 16)); - } - : function(a, b) { - if (b) { - while ((b = b.parentNode)) { - if (b === a) { - return true; - } - } - } - return false; - }; - - /* - * Sorting - * ---------------------------------------------------------------------- - */ - - // Document order sorting - sortOrder = hasCompare ? function(a, b) { - - // Flag for duplicate removal - if (a === b) { - hasDuplicate = true; - return 0; - } - - // Sort on method existence if only one input - // has compareDocumentPosition - var compare = !a.compareDocumentPosition - - !b.compareDocumentPosition; - if (compare) { - return compare; - } - - // Calculate position if both inputs belong to - // the same document - compare = (a.ownerDocument || a) === (b.ownerDocument || b) ? a - .compareDocumentPosition(b) - : - - // Otherwise we know they are - // disconnected - 1; - - // Disconnected nodes - if (compare - & 1 - || (!support.sortDetached && b - .compareDocumentPosition(a) === compare)) { - - // Choose the first element that is related - // to our preferred document - if (a === document - || a.ownerDocument === preferredDoc - && contains(preferredDoc, a)) { - return -1; - } - if (b === document - || b.ownerDocument === preferredDoc - && contains(preferredDoc, b)) { - return 1; - } - - // Maintain original order - return sortInput ? (indexOf(sortInput, a) - indexOf( - sortInput, b)) - : 0; - } - - return compare & 4 ? -1 : 1; - } - : function(a, b) { - // Exit early if the nodes are identical - if (a === b) { - hasDuplicate = true; - return 0; - } - - var cur, i = 0, aup = a.parentNode, bup = b.parentNode, ap = [ a ], bp = [ b ]; - - // Parentless nodes are either documents - // or disconnected - if (!aup || !bup) { - return a === document ? -1 - : b === document ? 1 - : aup ? -1 - : bup ? 1 - : sortInput ? (indexOf( - sortInput, - a) - indexOf( - sortInput, - b)) - : 0; - - // If the nodes are siblings, we can - // do a quick check - } else if (aup === bup) { - return siblingCheck(a, b); - } - - // Otherwise we need full lists of their - // ancestors for comparison - cur = a; - while ((cur = cur.parentNode)) { - ap.unshift(cur); - } - cur = b; - while ((cur = cur.parentNode)) { - bp.unshift(cur); - } - - // Walk down the tree looking for a - // discrepancy - while (ap[i] === bp[i]) { - i++; - } - - return i ? - // Do a sibling check if the nodes have - // a common ancestor - siblingCheck(ap[i], bp[i]) : - - // Otherwise nodes in our document sort - // first - ap[i] === preferredDoc ? -1 - : bp[i] === preferredDoc ? 1 - : 0; - }; - - return document; - }; - - Sizzle.matches = function(expr, elements) { - return Sizzle(expr, null, null, elements); - }; - - Sizzle.matchesSelector = function(elem, expr) { - // Set document vars if needed - if ((elem.ownerDocument || elem) !== document) { - setDocument(elem); - } - - // Make sure that attribute selectors are quoted - expr = expr.replace(rattributeQuotes, "='$1']"); - - if (support.matchesSelector - && documentIsHTML - && !compilerCache[expr + " "] - && (!rbuggyMatches || !rbuggyMatches - .test(expr)) - && (!rbuggyQSA || !rbuggyQSA.test(expr))) { - - try { - var ret = matches.call(elem, expr); - - // IE 9's matchesSelector returns false on - // disconnected nodes - if (ret || support.disconnectedMatch || - // As well, disconnected nodes are said to - // be in a document - // fragment in IE 9 - elem.document - && elem.document.nodeType !== 11) { - return ret; - } - } catch (e) { - } - } - - return Sizzle(expr, document, null, [ elem ]).length > 0; - }; - - Sizzle.contains = function(context, elem) { - // Set document vars if needed - if ((context.ownerDocument || context) !== document) { - setDocument(context); - } - return contains(context, elem); - }; - - Sizzle.attr = function(elem, name) { - // Set document vars if needed - if ((elem.ownerDocument || elem) !== document) { - setDocument(elem); - } - - var fn = Expr.attrHandle[name.toLowerCase()], - // Don't get fooled by Object.prototype properties - // (jQuery #13807) - val = fn - && hasOwn.call(Expr.attrHandle, name - .toLowerCase()) ? fn(elem, name, - !documentIsHTML) : undefined; - - return val !== undefined ? val : support.attributes - || !documentIsHTML ? elem - .getAttribute(name) : (val = elem - .getAttributeNode(name)) - && val.specified ? val.value : null; - }; - - Sizzle.error = function(msg) { - throw new Error( - "Syntax error, unrecognized expression: " - + msg); - }; - - /** - * Document sorting and removing duplicates - * - * @param {ArrayLike} - * results - */ - Sizzle.uniqueSort = function(results) { - var elem, duplicates = [], j = 0, i = 0; - - // Unless we *know* we can detect duplicates, assume - // their presence - hasDuplicate = !support.detectDuplicates; - sortInput = !support.sortStable && results.slice(0); - results.sort(sortOrder); - - if (hasDuplicate) { - while ((elem = results[i++])) { - if (elem === results[i]) { - j = duplicates.push(i); - } - } - while (j--) { - results.splice(duplicates[j], 1); - } - } - - // Clear input after sorting to release objects - // See https://github.com/jquery/sizzle/pull/225 - sortInput = null; - - return results; - }; - - /** - * Utility function for retrieving the text value of an - * array of DOM nodes - * - * @param {Array|Element} - * elem - */ - getText = Sizzle.getText = function(elem) { - var node, ret = "", i = 0, nodeType = elem.nodeType; - - if (!nodeType) { - // If no nodeType, this is expected to be an - // array - while ((node = elem[i++])) { - // Do not traverse comment nodes - ret += getText(node); - } - } else if (nodeType === 1 || nodeType === 9 - || nodeType === 11) { - // Use textContent for elements - // innerText usage removed for consistency of - // new lines (jQuery #11153) - if (typeof elem.textContent === "string") { - return elem.textContent; - } else { - // Traverse its children - for (elem = elem.firstChild; elem; elem = elem.nextSibling) { - ret += getText(elem); - } - } - } else if (nodeType === 3 || nodeType === 4) { - return elem.nodeValue; - } - // Do not include comment or processing instruction - // nodes - - return ret; - }; - - Expr = Sizzle.selectors = { - - // Can be adjusted by the user - cacheLength : 50, - - createPseudo : markFunction, - - match : matchExpr, - - attrHandle : {}, - - find : {}, - - relative : { - ">" : { - dir : "parentNode", - first : true - }, - " " : { - dir : "parentNode" - }, - "+" : { - dir : "previousSibling", - first : true - }, - "~" : { - dir : "previousSibling" - } - }, - - preFilter : { - "ATTR" : function(match) { - match[1] = match[1].replace(runescape, - funescape); - - // Move the given value to match[3] whether - // quoted or unquoted - match[3] = (match[3] || match[4] - || match[5] || "").replace( - runescape, funescape); - - if (match[2] === "~=") { - match[3] = " " + match[3] + " "; - } - - return match.slice(0, 4); - }, - - "CHILD" : function(match) { - /* - * matches from matchExpr["CHILD"] 1 type - * (only|nth|...) 2 what (child|of-type) 3 - * argument - * (even|odd|\d*|\d*n([+-]\d+)?|...) 4 - * xn-component of xn+y argument - * ([+-]?\d*n|) 5 sign of xn-component 6 x - * of xn-component 7 sign of y-component 8 y - * of y-component - */ - match[1] = match[1].toLowerCase(); - - if (match[1].slice(0, 3) === "nth") { - // nth-* requires argument - if (!match[3]) { - Sizzle.error(match[0]); - } - - // numeric x and y parameters for - // Expr.filter.CHILD - // remember that false/true cast - // respectively to 0/1 - match[4] = +(match[4] ? match[5] - + (match[6] || 1) - : 2 * (match[3] === "even" || match[3] === "odd")); - match[5] = +((match[7] + match[8]) || match[3] === "odd"); - - // other types prohibit arguments - } else if (match[3]) { - Sizzle.error(match[0]); - } - - return match; - }, - - "PSEUDO" : function(match) { - var excess, unquoted = !match[6] - && match[2]; - - if (matchExpr["CHILD"].test(match[0])) { - return null; - } - - // Accept quoted arguments as-is - if (match[3]) { - match[2] = match[4] || match[5] || ""; - - // Strip excess characters from unquoted - // arguments - } else if (unquoted - && rpseudo.test(unquoted) - && - // Get excess from tokenize - // (recursively) - (excess = tokenize(unquoted, true)) - && - // advance to the next closing - // parenthesis - (excess = unquoted.indexOf(")", - unquoted.length - excess) - - unquoted.length)) { - - // excess is a negative index - match[0] = match[0].slice(0, excess); - match[2] = unquoted.slice(0, excess); - } - - // Return only captures needed by the pseudo - // filter method (type and argument) - return match.slice(0, 3); - } - }, - - filter : { - - "TAG" : function(nodeNameSelector) { - var nodeName = nodeNameSelector.replace( - runescape, funescape).toLowerCase(); - return nodeNameSelector === "*" ? function() { - return true; - } - : function(elem) { - return elem.nodeName - && elem.nodeName - .toLowerCase() === nodeName; - }; - }, - - "CLASS" : function(className) { - var pattern = classCache[className + " "]; - - return pattern - || (pattern = new RegExp("(^|" - + whitespace + ")" - + className + "(" - + whitespace + "|$)")) - && classCache( - className, - function(elem) { - return pattern - .test(typeof elem.className === "string" - && elem.className - || typeof elem.getAttribute !== "undefined" - && elem - .getAttribute("class") - || ""); - }); - }, - - "ATTR" : function(name, operator, check) { - return function(elem) { - var result = Sizzle.attr(elem, name); - - if (result == null) { - return operator === "!="; - } - if (!operator) { - return true; - } - - result += ""; - - return operator === "=" ? result === check - : operator === "!=" ? result !== check - : operator === "^=" ? check - && result - .indexOf(check) === 0 - : operator === "*=" ? check - && result - .indexOf(check) > -1 - : operator === "$=" ? check - && result - .slice(-check.length) === check - : operator === "~=" ? (" " - + result - .replace( - rwhitespace, - " ") + " ") - .indexOf(check) > -1 - : operator === "|=" ? result === check - || result - .slice( - 0, - check.length + 1) === check - + "-" - : false; - }; - }, - - "CHILD" : function(type, what, argument, first, - last) { - var simple = type.slice(0, 3) !== "nth", forward = type - .slice(-4) !== "last", ofType = what === "of-type"; - - return first === 1 && last === 0 ? - - // Shortcut for :nth-*(n) - function(elem) { - return !!elem.parentNode; - } - : - - function(elem, context, xml) { - var cache, uniqueCache, outerCache, node, nodeIndex, start, dir = simple !== forward ? "nextSibling" - : "previousSibling", parent = elem.parentNode, name = ofType - && elem.nodeName - .toLowerCase(), useCache = !xml - && !ofType, diff = false; - - if (parent) { - - // :(first|last|only)-(child|of-type) - if (simple) { - while (dir) { - node = elem; - while ((node = node[dir])) { - if (ofType ? node.nodeName - .toLowerCase() === name - : node.nodeType === 1) { - - return false; - } - } - // Reverse direction - // for :only-* (if - // we haven't yet - // done so) - start = dir = type === "only" - && !start - && "nextSibling"; - } - return true; - } - - start = [ forward ? parent.firstChild - : parent.lastChild ]; - - // non-xml :nth-child(...) - // stores cache data on - // `parent` - if (forward && useCache) { - - // Seek `elem` from a - // previously-cached - // index - - // ...in a gzip-friendly - // way - node = parent; - outerCache = node[expando] - || (node[expando] = {}); - - // Support: IE <9 only - // Defend against cloned - // attroperties (jQuery - // gh-1709) - uniqueCache = outerCache[node.uniqueID] - || (outerCache[node.uniqueID] = {}); - - cache = uniqueCache[type] - || []; - nodeIndex = cache[0] === dirruns - && cache[1]; - diff = nodeIndex - && cache[2]; - node = nodeIndex - && parent.childNodes[nodeIndex]; - - while ((node = ++nodeIndex - && node - && node[dir] - || - - // Fallback to - // seeking - // `elem` from - // the start - (diff = nodeIndex = 0) - || start.pop())) { - - // When found, cache - // indexes on - // `parent` and - // break - if (node.nodeType === 1 - && ++diff - && node === elem) { - uniqueCache[type] = [ - dirruns, - nodeIndex, - diff ]; - break; - } - } - - } else { - // Use previously-cached - // element index if - // available - if (useCache) { - // ...in a - // gzip-friendly way - node = elem; - outerCache = node[expando] - || (node[expando] = {}); - - // Support: IE <9 - // only - // Defend against - // cloned - // attroperties - // (jQuery gh-1709) - uniqueCache = outerCache[node.uniqueID] - || (outerCache[node.uniqueID] = {}); - - cache = uniqueCache[type] - || []; - nodeIndex = cache[0] === dirruns - && cache[1]; - diff = nodeIndex; - } - - // xml :nth-child(...) - // or - // :nth-last-child(...) - // or - // :nth(-last)?-of-type(...) - if (diff === false) { - // Use the same loop - // as above to seek - // `elem` from the - // start - while ((node = ++nodeIndex - && node - && node[dir] - || (diff = nodeIndex = 0) - || start - .pop())) { - - if ((ofType ? node.nodeName - .toLowerCase() === name - : node.nodeType === 1) - && ++diff) { - - // Cache the - // index of - // each - // encountered - // element - if (useCache) { - outerCache = node[expando] - || (node[expando] = {}); - - // Support: - // IE <9 - // only - // Defend - // against - // cloned - // attroperties - // (jQuery - // gh-1709) - uniqueCache = outerCache[node.uniqueID] - || (outerCache[node.uniqueID] = {}); - - uniqueCache[type] = [ - dirruns, - diff ]; - } - - if (node === elem) { - break; - } - } - } - } - } - - // Incorporate the offset, - // then check against cycle - // size - diff -= last; - return diff === first - || (diff % first === 0 && diff - / first >= 0); - } - }; - }, - - "PSEUDO" : function(pseudo, argument) { - // pseudo-class names are case-insensitive - // http://www.w3.org/TR/selectors/#pseudo-classes - // Prioritize by case sensitivity in case - // custom pseudos are added with uppercase - // letters - // Remember that setFilters inherits from - // pseudos - var args, fn = Expr.pseudos[pseudo] - || Expr.setFilters[pseudo - .toLowerCase()] - || Sizzle - .error("unsupported pseudo: " - + pseudo); - - // The user may use createPseudo to indicate - // that - // arguments are needed to create the filter - // function - // just as Sizzle does - if (fn[expando]) { - return fn(argument); - } - - // But maintain support for old signatures - if (fn.length > 1) { - args = [ pseudo, pseudo, "", argument ]; - return Expr.setFilters - .hasOwnProperty(pseudo - .toLowerCase()) ? markFunction(function( - seed, matches) { - var idx, matched = fn(seed, - argument), i = matched.length; - while (i--) { - idx = indexOf(seed, matched[i]); - seed[idx] = !(matches[idx] = matched[i]); - } - }) - : function(elem) { - return fn(elem, 0, args); - }; - } - - return fn; - } - }, - - pseudos : { - // Potentially complex pseudos - "not" : markFunction(function(selector) { - // Trim the selector passed to compile - // to avoid treating leading and trailing - // spaces as combinators - var input = [], results = [], matcher = compile(selector - .replace(rtrim, "$1")); - - return matcher[expando] ? markFunction(function( - seed, matches, context, xml) { - var elem, unmatched = matcher(seed, - null, xml, []), i = seed.length; - - // Match elements unmatched by `matcher` - while (i--) { - if ((elem = unmatched[i])) { - seed[i] = !(matches[i] = elem); - } - } - }) - : function(elem, context, xml) { - input[0] = elem; - matcher(input, null, xml, - results); - // Don't keep the element (issue - // #299) - input[0] = null; - return !results.pop(); - }; - }), - - "has" : markFunction(function(selector) { - return function(elem) { - return Sizzle(selector, elem).length > 0; - }; - }), - - "contains" : markFunction(function(text) { - text = text.replace(runescape, funescape); - return function(elem) { - return (elem.textContent - || elem.innerText || getText(elem)) - .indexOf(text) > -1; - }; - }), - - // "Whether an element is represented by a - // :lang() selector - // is based solely on the element's language - // value - // being equal to the identifier C, - // or beginning with the identifier C - // immediately followed by "-". - // The matching of C against the element's - // language value is performed - // case-insensitively. - // The identifier C does not have to be a valid - // language name." - // http://www.w3.org/TR/selectors/#lang-pseudo - "lang" : markFunction(function(lang) { - // lang value must be a valid identifier - if (!ridentifier.test(lang || "")) { - Sizzle.error("unsupported lang: " - + lang); - } - lang = lang.replace(runescape, funescape) - .toLowerCase(); - return function(elem) { - var elemLang; - do { - if ((elemLang = documentIsHTML ? elem.lang - : elem - .getAttribute("xml:lang") - || elem - .getAttribute("lang"))) { - - elemLang = elemLang - .toLowerCase(); - return elemLang === lang - || elemLang - .indexOf(lang - + "-") === 0; - } - } while ((elem = elem.parentNode) - && elem.nodeType === 1); - return false; - }; - }), - - // Miscellaneous - "target" : function(elem) { - var hash = window.location - && window.location.hash; - return hash && hash.slice(1) === elem.id; - }, - - "root" : function(elem) { - return elem === docElem; - }, - - "focus" : function(elem) { - return elem === document.activeElement - && (!document.hasFocus || document - .hasFocus()) - && !!(elem.type || elem.href || ~elem.tabIndex); - }, - - // Boolean properties - "enabled" : function(elem) { - return elem.disabled === false; - }, - - "disabled" : function(elem) { - return elem.disabled === true; - }, - - "checked" : function(elem) { - // In CSS3, :checked should return both - // checked and selected elements - // http://www.w3.org/TR/2011/REC-css3-selectors-20110929/#checked - var nodeName = elem.nodeName.toLowerCase(); - return (nodeName === "input" && !!elem.checked) - || (nodeName === "option" && !!elem.selected); - }, - - "selected" : function(elem) { - // Accessing this property makes - // selected-by-default - // options in Safari work properly - if (elem.parentNode) { - elem.parentNode.selectedIndex; - } - - return elem.selected === true; - }, - - // Contents - "empty" : function(elem) { - // http://www.w3.org/TR/selectors/#empty-pseudo - // :empty is negated by element (1) or - // content nodes (text: 3; cdata: 4; entity - // ref: 5), - // but not by others (comment: 8; processing - // instruction: 7; etc.) - // nodeType < 6 works because attributes (2) - // do not appear as children - for (elem = elem.firstChild; elem; elem = elem.nextSibling) { - if (elem.nodeType < 6) { - return false; - } - } - return true; - }, - - "parent" : function(elem) { - return !Expr.pseudos["empty"](elem); - }, - - // Element/input types - "header" : function(elem) { - return rheader.test(elem.nodeName); - }, - - "input" : function(elem) { - return rinputs.test(elem.nodeName); - }, - - "button" : function(elem) { - var name = elem.nodeName.toLowerCase(); - return name === "input" - && elem.type === "button" - || name === "button"; - }, - - "text" : function(elem) { - var attr; - return elem.nodeName.toLowerCase() === "input" - && elem.type === "text" - && - - // Support: IE<8 - // New HTML5 attribute values (e.g., - // "search") appear with elem.type - // === "text" - ((attr = elem.getAttribute("type")) == null || attr - .toLowerCase() === "text"); - }, - - // Position-in-collection - "first" : createPositionalPseudo(function() { - return [ 0 ]; - }), - - "last" : createPositionalPseudo(function( - matchIndexes, length) { - return [ length - 1 ]; - }), - - "eq" : createPositionalPseudo(function( - matchIndexes, length, argument) { - return [ argument < 0 ? argument + length - : argument ]; - }), - - "even" : createPositionalPseudo(function( - matchIndexes, length) { - var i = 0; - for (; i < length; i += 2) { - matchIndexes.push(i); - } - return matchIndexes; - }), - - "odd" : createPositionalPseudo(function( - matchIndexes, length) { - var i = 1; - for (; i < length; i += 2) { - matchIndexes.push(i); - } - return matchIndexes; - }), - - "lt" : createPositionalPseudo(function( - matchIndexes, length, argument) { - var i = argument < 0 ? argument + length - : argument; - for (; --i >= 0;) { - matchIndexes.push(i); - } - return matchIndexes; - }), - - "gt" : createPositionalPseudo(function( - matchIndexes, length, argument) { - var i = argument < 0 ? argument + length - : argument; - for (; ++i < length;) { - matchIndexes.push(i); - } - return matchIndexes; - }) - } - }; - - Expr.pseudos["nth"] = Expr.pseudos["eq"]; - - // Add button/input type pseudos - for (i in { - radio : true, - checkbox : true, - file : true, - password : true, - image : true - }) { - Expr.pseudos[i] = createInputPseudo(i); - } - for (i in { - submit : true, - reset : true - }) { - Expr.pseudos[i] = createButtonPseudo(i); - } - - // Easy API for creating new setFilters - function setFilters() { - } - setFilters.prototype = Expr.filters = Expr.pseudos; - Expr.setFilters = new setFilters(); - - tokenize = Sizzle.tokenize = function(selector, - parseOnly) { - var matched, match, tokens, type, soFar, groups, preFilters, cached = tokenCache[selector - + " "]; - - if (cached) { - return parseOnly ? 0 : cached.slice(0); - } - - soFar = selector; - groups = []; - preFilters = Expr.preFilter; - - while (soFar) { - - // Comma and first run - if (!matched || (match = rcomma.exec(soFar))) { - if (match) { - // Don't consume trailing commas as - // valid - soFar = soFar.slice(match[0].length) - || soFar; - } - groups.push((tokens = [])); - } - - matched = false; - - // Combinators - if ((match = rcombinators.exec(soFar))) { - matched = match.shift(); - tokens.push({ - value : matched, - // Cast descendant combinators to space - type : match[0].replace(rtrim, " ") - }); - soFar = soFar.slice(matched.length); - } - - // Filters - for (type in Expr.filter) { - if ((match = matchExpr[type].exec(soFar)) - && (!preFilters[type] || (match = preFilters[type] - (match)))) { - matched = match.shift(); - tokens.push({ - value : matched, - type : type, - matches : match - }); - soFar = soFar.slice(matched.length); - } - } - - if (!matched) { - break; - } - } - - // Return the length of the invalid excess - // if we're just parsing - // Otherwise, throw an error or return tokens - return parseOnly ? soFar.length : soFar ? Sizzle - .error(selector) : - // Cache the tokens - tokenCache(selector, groups).slice(0); - }; - - function toSelector(tokens) { - var i = 0, len = tokens.length, selector = ""; - for (; i < len; i++) { - selector += tokens[i].value; - } - return selector; - } - - function addCombinator(matcher, combinator, base) { - var dir = combinator.dir, checkNonElements = base - && dir === "parentNode", doneName = done++; - - return combinator.first ? - // Check against closest ancestor/preceding element - function(elem, context, xml) { - while ((elem = elem[dir])) { - if (elem.nodeType === 1 || checkNonElements) { - return matcher(elem, context, xml); - } - } - } - : - - // Check against all ancestor/preceding - // elements - function(elem, context, xml) { - var oldCache, uniqueCache, outerCache, newCache = [ - dirruns, doneName ]; - - // We can't set arbitrary data on XML - // nodes, so they don't benefit from - // combinator caching - if (xml) { - while ((elem = elem[dir])) { - if (elem.nodeType === 1 - || checkNonElements) { - if (matcher(elem, context, - xml)) { - return true; - } - } - } - } else { - while ((elem = elem[dir])) { - if (elem.nodeType === 1 - || checkNonElements) { - outerCache = elem[expando] - || (elem[expando] = {}); - - // Support: IE <9 only - // Defend against cloned - // attroperties (jQuery - // gh-1709) - uniqueCache = outerCache[elem.uniqueID] - || (outerCache[elem.uniqueID] = {}); - - if ((oldCache = uniqueCache[dir]) - && oldCache[0] === dirruns - && oldCache[1] === doneName) { - - // Assign to newCache so - // results - // back-propagate to - // previous elements - return (newCache[2] = oldCache[2]); - } else { - // Reuse newcache so - // results - // back-propagate to - // previous elements - uniqueCache[dir] = newCache; - - // A match means we're - // done; a fail means we - // have to keep checking - if ((newCache[2] = matcher( - elem, context, - xml))) { - return true; - } - } - } - } - } - }; - } - - function elementMatcher(matchers) { - return matchers.length > 1 ? function(elem, - context, xml) { - var i = matchers.length; - while (i--) { - if (!matchers[i](elem, context, xml)) { - return false; - } - } - return true; - } : matchers[0]; - } - - function multipleContexts(selector, contexts, results) { - var i = 0, len = contexts.length; - for (; i < len; i++) { - Sizzle(selector, contexts[i], results); - } - return results; - } - - function condense(unmatched, map, filter, context, xml) { - var elem, newUnmatched = [], i = 0, len = unmatched.length, mapped = map != null; - - for (; i < len; i++) { - if ((elem = unmatched[i])) { - if (!filter || filter(elem, context, xml)) { - newUnmatched.push(elem); - if (mapped) { - map.push(i); - } - } - } - } - - return newUnmatched; - } - - function setMatcher(preFilter, selector, matcher, - postFilter, postFinder, postSelector) { - if (postFilter && !postFilter[expando]) { - postFilter = setMatcher(postFilter); - } - if (postFinder && !postFinder[expando]) { - postFinder = setMatcher(postFinder, - postSelector); - } - return markFunction(function(seed, results, - context, xml) { - var temp, i, elem, preMap = [], postMap = [], preexisting = results.length, - - // Get initial elements from seed or context - elems = seed - || multipleContexts(selector || "*", - context.nodeType ? [ context ] - : context, []), - - // Prefilter to get matcher input, preserving a - // map for seed-results synchronization - matcherIn = preFilter && (seed || !selector) ? condense( - elems, preMap, preFilter, context, xml) - : elems, - - matcherOut = matcher ? - // If we have a postFinder, or filtered seed, or - // non-seed postFilter or preexisting results, - postFinder - || (seed ? preFilter : preexisting - || postFilter) ? - - // ...intermediate processing is necessary - [] : - - // ...otherwise use results directly - results : matcherIn; - - // Find primary matches - if (matcher) { - matcher(matcherIn, matcherOut, context, xml); - } - - // Apply postFilter - if (postFilter) { - temp = condense(matcherOut, postMap); - postFilter(temp, [], context, xml); - - // Un-match failing elements by moving them - // back to matcherIn - i = temp.length; - while (i--) { - if ((elem = temp[i])) { - matcherOut[postMap[i]] = !(matcherIn[postMap[i]] = elem); - } - } - } - - if (seed) { - if (postFinder || preFilter) { - if (postFinder) { - // Get the final matcherOut by - // condensing this intermediate into - // postFinder contexts - temp = []; - i = matcherOut.length; - while (i--) { - if ((elem = matcherOut[i])) { - // Restore matcherIn since - // elem is not yet a final - // match - temp - .push((matcherIn[i] = elem)); - } - } - postFinder(null, (matcherOut = []), - temp, xml); - } - - // Move matched elements from seed to - // results to keep them synchronized - i = matcherOut.length; - while (i--) { - if ((elem = matcherOut[i]) - && (temp = postFinder ? indexOf( - seed, elem) - : preMap[i]) > -1) { - - seed[temp] = !(results[temp] = elem); - } - } - } - - // Add elements to results, through - // postFinder if defined - } else { - matcherOut = condense(matcherOut === results ? matcherOut - .splice(preexisting, - matcherOut.length) - : matcherOut); - if (postFinder) { - postFinder(null, results, matcherOut, - xml); - } else { - push.apply(results, matcherOut); - } - } - }); - } - - function matcherFromTokens(tokens) { - var checkContext, matcher, j, len = tokens.length, leadingRelative = Expr.relative[tokens[0].type], implicitRelative = leadingRelative - || Expr.relative[" "], i = leadingRelative ? 1 - : 0, - - // The foundational matcher ensures that elements - // are reachable from top-level context(s) - matchContext = addCombinator(function(elem) { - return elem === checkContext; - }, implicitRelative, true), matchAnyContext = addCombinator( - function(elem) { - return indexOf(checkContext, elem) > -1; - }, implicitRelative, true), matchers = [ function( - elem, context, xml) { - var ret = (!leadingRelative && (xml || context !== outermostContext)) - || ((checkContext = context).nodeType ? matchContext( - elem, context, xml) - : matchAnyContext(elem, - context, xml)); - // Avoid hanging onto element (issue #299) - checkContext = null; - return ret; - } ]; - - for (; i < len; i++) { - if ((matcher = Expr.relative[tokens[i].type])) { - matchers = [ addCombinator( - elementMatcher(matchers), matcher) ]; - } else { - matcher = Expr.filter[tokens[i].type] - .apply(null, tokens[i].matches); - - // Return special upon seeing a positional - // matcher - if (matcher[expando]) { - // Find the next relative operator (if - // any) for proper handling - j = ++i; - for (; j < len; j++) { - if (Expr.relative[tokens[j].type]) { - break; - } - } - return setMatcher( - i > 1 - && elementMatcher(matchers), - i > 1 - && toSelector( - // If the - // preceding - // token was a - // descendant - // combinator, - // insert an - // implicit - // any-element - // `*` - tokens - .slice( - 0, - i - 1) - .concat( - { - value : tokens[i - 2].type === " " ? "*" - : "" - })) - .replace(rtrim, - "$1"), - matcher, - i < j - && matcherFromTokens(tokens - .slice(i, j)), - j < len - && matcherFromTokens((tokens = tokens - .slice(j))), - j < len && toSelector(tokens)); - } - matchers.push(matcher); - } - } - - return elementMatcher(matchers); - } - - function matcherFromGroupMatchers(elementMatchers, - setMatchers) { - var bySet = setMatchers.length > 0, byElement = elementMatchers.length > 0, superMatcher = function( - seed, context, xml, results, outermost) { - var elem, j, matcher, matchedCount = 0, i = "0", unmatched = seed - && [], setMatched = [], contextBackup = outermostContext, - // We must always have either seed elements or - // outermost context - elems = seed || byElement - && Expr.find["TAG"]("*", outermost), - // Use integer dirruns iff this is the outermost - // matcher - dirrunsUnique = (dirruns += contextBackup == null ? 1 - : Math.random() || 0.1), len = elems.length; - - if (outermost) { - outermostContext = context === document - || context || outermost; - } - - // Add elements passing elementMatchers directly - // to results - // Support: IE<9, Safari - // Tolerate NodeList properties (IE: "length"; - // Safari: ) matching elements by id - for (; i !== len && (elem = elems[i]) != null; i++) { - if (byElement && elem) { - j = 0; - if (!context - && elem.ownerDocument !== document) { - setDocument(elem); - xml = !documentIsHTML; - } - while ((matcher = elementMatchers[j++])) { - if (matcher(elem, context - || document, xml)) { - results.push(elem); - break; - } - } - if (outermost) { - dirruns = dirrunsUnique; - } - } - - // Track unmatched elements for set filters - if (bySet) { - // They will have gone through all - // possible matchers - if ((elem = !matcher && elem)) { - matchedCount--; - } - - // Lengthen the array for every element, - // matched or not - if (seed) { - unmatched.push(elem); - } - } - } - - // `i` is now the count of elements visited - // above, and adding it to `matchedCount` - // makes the latter nonnegative. - matchedCount += i; - - // Apply set filters to unmatched elements - // NOTE: This can be skipped if there are no - // unmatched elements (i.e., `matchedCount` - // equals `i`), unless we didn't visit _any_ - // elements in the above loop because we have - // no element matchers and no seed. - // Incrementing an initially-string "0" `i` - // allows `i` to remain a string only in that - // case, which will result in a "00" - // `matchedCount` that differs from `i` but is - // also - // numerically zero. - if (bySet && i !== matchedCount) { - j = 0; - while ((matcher = setMatchers[j++])) { - matcher(unmatched, setMatched, context, - xml); - } - - if (seed) { - // Reintegrate element matches to - // eliminate the need for sorting - if (matchedCount > 0) { - while (i--) { - if (!(unmatched[i] || setMatched[i])) { - setMatched[i] = pop - .call(results); - } - } - } - - // Discard index placeholder values to - // get only actual matches - setMatched = condense(setMatched); - } - - // Add matches to results - push.apply(results, setMatched); - - // Seedless set matches succeeding multiple - // successful matchers stipulate sorting - if (outermost - && !seed - && setMatched.length > 0 - && (matchedCount + setMatchers.length) > 1) { - - Sizzle.uniqueSort(results); - } - } - - // Override manipulation of globals by nested - // matchers - if (outermost) { - dirruns = dirrunsUnique; - outermostContext = contextBackup; - } - - return unmatched; - }; - - return bySet ? markFunction(superMatcher) - : superMatcher; - } - - compile = Sizzle.compile = function(selector, match /* - * Internal - * Use - * Only - */) { - var i, setMatchers = [], elementMatchers = [], cached = compilerCache[selector - + " "]; - - if (!cached) { - // Generate a function of recursive functions - // that can be used to check each element - if (!match) { - match = tokenize(selector); - } - i = match.length; - while (i--) { - cached = matcherFromTokens(match[i]); - if (cached[expando]) { - setMatchers.push(cached); - } else { - elementMatchers.push(cached); - } - } - - // Cache the compiled function - cached = compilerCache(selector, - matcherFromGroupMatchers( - elementMatchers, setMatchers)); - - // Save selector and tokenization - cached.selector = selector; - } - return cached; - }; - - /** - * A low-level selection function that works with - * Sizzle's compiled selector functions - * - * @param {String|Function} - * selector A selector or a pre-compiled - * selector function built with - * Sizzle.compile - * @param {Element} - * context - * @param {Array} - * [results] - * @param {Array} - * [seed] A set of elements to match against - */ - select = Sizzle.select = function(selector, context, - results, seed) { - var i, tokens, token, type, find, compiled = typeof selector === "function" - && selector, match = !seed - && tokenize((selector = compiled.selector - || selector)); - - results = results || []; - - // Try to minimize operations if there is only one - // selector in the list and no seed - // (the latter of which guarantees us context) - if (match.length === 1) { - - // Reduce context if the leading compound - // selector is an ID - tokens = match[0] = match[0].slice(0); - if (tokens.length > 2 - && (token = tokens[0]).type === "ID" - && support.getById - && context.nodeType === 9 - && documentIsHTML - && Expr.relative[tokens[1].type]) { - - context = (Expr.find["ID"](token.matches[0] - .replace(runescape, funescape), - context) || [])[0]; - if (!context) { - return results; - - // Precompiled matchers will still - // verify ancestry, so step up a level - } else if (compiled) { - context = context.parentNode; - } - - selector = selector - .slice(tokens.shift().value.length); - } - - // Fetch a seed set for right-to-left matching - i = matchExpr["needsContext"].test(selector) ? 0 - : tokens.length; - while (i--) { - token = tokens[i]; - - // Abort if we hit a combinator - if (Expr.relative[(type = token.type)]) { - break; - } - if ((find = Expr.find[type])) { - // Search, expanding context for leading - // sibling combinators - if ((seed = find( - token.matches[0].replace( - runescape, funescape), - rsibling.test(tokens[0].type) - && testContext(context.parentNode) - || context))) { - - // If seed is empty or no tokens - // remain, we can return early - tokens.splice(i, 1); - selector = seed.length - && toSelector(tokens); - if (!selector) { - push.apply(results, seed); - return results; - } - - break; - } - } - } - } - - // Compile and execute a filtering function if one - // is not provided - // Provide `match` to avoid retokenization if we - // modified the selector above - (compiled || compile(selector, match))(seed, - context, !documentIsHTML, results, !context - || rsibling.test(selector) - && testContext(context.parentNode) - || context); - return results; - }; - - // One-time assignments - - // Sort stability - support.sortStable = expando.split("").sort(sortOrder) - .join("") === expando; - - // Support: Chrome 14-35+ - // Always assume duplicates if they aren't passed to the - // comparison function - support.detectDuplicates = !!hasDuplicate; - - // Initialize against the default document - setDocument(); - - // Support: Webkit<537.32 - Safari 6.0.3/Chrome 25 - // (fixed in Chrome 27) - // Detached nodes confoundingly follow *each other* - support.sortDetached = assert(function(div1) { - // Should return 1, but returns 4 (following) - return div1.compareDocumentPosition(document - .createElement("div")) & 1; - }); - - // Support: IE<8 - // Prevent attribute/property "interpolation" - // http://msdn.microsoft.com/en-us/library/ms536429%28VS.85%29.aspx - if (!assert(function(div) { - div.innerHTML = ""; - return div.firstChild.getAttribute("href") === "#"; - })) { - addHandle("type|href|height|width", function(elem, - name, isXML) { - if (!isXML) { - return elem.getAttribute(name, name - .toLowerCase() === "type" ? 1 : 2); - } - }); - } - - // Support: IE<9 - // Use defaultValue in place of getAttribute("value") - if (!support.attributes || !assert(function(div) { - div.innerHTML = ""; - div.firstChild.setAttribute("value", ""); - return div.firstChild.getAttribute("value") === ""; - })) { - addHandle( - "value", - function(elem, name, isXML) { - if (!isXML - && elem.nodeName.toLowerCase() === "input") { - return elem.defaultValue; - } - }); - } - - // Support: IE<9 - // Use getAttributeNode to fetch booleans when - // getAttribute lies - if (!assert(function(div) { - return div.getAttribute("disabled") == null; - })) { - addHandle( - booleans, - function(elem, name, isXML) { - var val; - if (!isXML) { - return elem[name] === true ? name - .toLowerCase() - : (val = elem - .getAttributeNode(name)) - && val.specified ? val.value - : null; - } - }); - } - - return Sizzle; - - })(window); - - jQuery.find = Sizzle; - jQuery.expr = Sizzle.selectors; - jQuery.expr[":"] = jQuery.expr.pseudos; - jQuery.uniqueSort = jQuery.unique = Sizzle.uniqueSort; - jQuery.text = Sizzle.getText; - jQuery.isXMLDoc = Sizzle.isXML; - jQuery.contains = Sizzle.contains; - - var dir = function(elem, dir, until) { - var matched = [], truncate = until !== undefined; - - while ((elem = elem[dir]) && elem.nodeType !== 9) { - if (elem.nodeType === 1) { - if (truncate && jQuery(elem).is(until)) { - break; - } - matched.push(elem); - } - } - return matched; - }; - - var siblings = function(n, elem) { - var matched = []; - - for (; n; n = n.nextSibling) { - if (n.nodeType === 1 && n !== elem) { - matched.push(n); - } - } - - return matched; - }; - - var rneedsContext = jQuery.expr.match.needsContext; - - var rsingleTag = (/^<([\w-]+)\s*\/?>(?:<\/\1>|)$/); - - var risSimple = /^.[^:#\[\.,]*$/; - - // Implement the identical functionality for filter and not - function winnow(elements, qualifier, not) { - if (jQuery.isFunction(qualifier)) { - return jQuery.grep(elements, function(elem, i) { - /* jshint -W018 */ - return !!qualifier.call(elem, i, elem) !== not; - }); - - } - - if (qualifier.nodeType) { - return jQuery.grep(elements, function(elem) { - return (elem === qualifier) !== not; - }); - - } - - if (typeof qualifier === "string") { - if (risSimple.test(qualifier)) { - return jQuery.filter(qualifier, elements, not); - } - - qualifier = jQuery.filter(qualifier, elements); - } - - return jQuery - .grep(elements, - function(elem) { - return (jQuery.inArray(elem, - qualifier) > -1) !== not; - }); - } - - jQuery.filter = function(expr, elems, not) { - var elem = elems[0]; - - if (not) { - expr = ":not(" + expr + ")"; - } - - return elems.length === 1 && elem.nodeType === 1 ? jQuery.find - .matchesSelector(elem, expr) ? [ elem ] : [] - : jQuery.find.matches(expr, jQuery.grep(elems, - function(elem) { - return elem.nodeType === 1; - })); - }; - - jQuery.fn - .extend({ - find : function(selector) { - var i, ret = [], self = this, len = self.length; - - if (typeof selector !== "string") { - return this - .pushStack(jQuery(selector) - .filter( - function() { - for (i = 0; i < len; i++) { - if (jQuery - .contains( - self[i], - this)) { - return true; - } - } - })); - } - - for (i = 0; i < len; i++) { - jQuery.find(selector, self[i], ret); - } - - // Needed because $( selector, context ) - // becomes $( context ).find( selector ) - ret = this.pushStack(len > 1 ? jQuery - .unique(ret) : ret); - ret.selector = this.selector ? this.selector - + " " + selector - : selector; - return ret; - }, - filter : function(selector) { - return this.pushStack(winnow(this, selector - || [], false)); - }, - not : function(selector) { - return this.pushStack(winnow(this, selector - || [], true)); - }, - is : function(selector) { - return !!winnow( - this, - - // If this is a positional/relative - // selector, check membership in the - // returned set - // so $("p:first").is("p:last") - // won't return true for a doc with - // two "p". - typeof selector === "string" - && rneedsContext - .test(selector) ? jQuery(selector) - : selector || [], false).length; - } - }); - - // Initialize a jQuery object - - // A central reference to the root jQuery(document) - var rootjQuery, - - // A simple way to check for HTML strings - // Prioritize #id over to avoid XSS via location.hash - // (#9521) - // Strict HTML recognition (#11290: must start with <) - rquickExpr = /^(?:\s*(<[\w\W]+>)[^>]*|#([\w-]*))$/, - - init = jQuery.fn.init = function(selector, context, root) { - var match, elem; - - // HANDLE: $(""), $(null), $(undefined), $(false) - if (!selector) { - return this; - } - - // init accepts an alternate rootjQuery - // so migrate can support jQuery.sub (gh-2101) - root = root || rootjQuery; - - // Handle HTML strings - if (typeof selector === "string") { - if (selector.charAt(0) === "<" - && selector.charAt(selector.length - 1) === ">" - && selector.length >= 3) { - - // Assume that strings that start and end with - // <> are HTML and skip the regex check - match = [ null, selector, null ]; - - } else { - match = rquickExpr.exec(selector); - } - - // Match html or make sure no context is specified - // for #id - if (match && (match[1] || !context)) { - - // HANDLE: $(html) -> $(array) - if (match[1]) { - context = context instanceof jQuery ? context[0] - : context; - - // scripts is true for back-compat - // Intentionally let the error be thrown if - // parseHTML is not present - jQuery - .merge( - this, - jQuery - .parseHTML( - match[1], - context - && context.nodeType ? context.ownerDocument - || context - : document, - true)); - - // HANDLE: $(html, props) - if (rsingleTag.test(match[1]) - && jQuery.isPlainObject(context)) { - for (match in context) { - - // Properties of context are called - // as methods if possible - if (jQuery.isFunction(this[match])) { - this[match](context[match]); - - // ...and otherwise set as - // attributes - } else { - this - .attr(match, - context[match]); - } - } - } - - return this; - - // HANDLE: $(#id) - } else { - elem = document.getElementById(match[2]); - - // Check parentNode to catch when Blackberry - // 4.6 returns - // nodes that are no longer in the document - // #6963 - if (elem && elem.parentNode) { - - // Handle the case where IE and Opera - // return items - // by name instead of ID - if (elem.id !== match[2]) { - return rootjQuery.find(selector); - } - - // Otherwise, we inject the element - // directly into the jQuery object - this.length = 1; - this[0] = elem; - } - - this.context = document; - this.selector = selector; - return this; - } - - // HANDLE: $(expr, $(...)) - } else if (!context || context.jquery) { - return (context || root).find(selector); - - // HANDLE: $(expr, context) - // (which is just equivalent to: - // $(context).find(expr) - } else { - return this.constructor(context).find(selector); - } - - // HANDLE: $(DOMElement) - } else if (selector.nodeType) { - this.context = this[0] = selector; - this.length = 1; - return this; - - // HANDLE: $(function) - // Shortcut for document ready - } else if (jQuery.isFunction(selector)) { - return typeof root.ready !== "undefined" ? root - .ready(selector) : - - // Execute immediately if ready is not present - selector(jQuery); - } - - if (selector.selector !== undefined) { - this.selector = selector.selector; - this.context = selector.context; - } - - return jQuery.makeArray(selector, this); - }; - - // Give the init function the jQuery prototype for later - // instantiation - init.prototype = jQuery.fn; - - // Initialize central reference - rootjQuery = jQuery(document); - - var rparentsprev = /^(?:parents|prev(?:Until|All))/, - - // methods guaranteed to produce a unique set when starting - // from a unique set - guaranteedUnique = { - children : true, - contents : true, - next : true, - prev : true - }; - - jQuery.fn - .extend({ - has : function(target) { - var i, targets = jQuery(target, this), len = targets.length; - - return this.filter(function() { - for (i = 0; i < len; i++) { - if (jQuery.contains(this, - targets[i])) { - return true; - } - } - }); - }, - - closest : function(selectors, context) { - var cur, i = 0, l = this.length, matched = [], pos = rneedsContext - .test(selectors) - || typeof selectors !== "string" ? jQuery( - selectors, context || this.context) - : 0; - - for (; i < l; i++) { - for (cur = this[i]; cur - && cur !== context; cur = cur.parentNode) { - - // Always skip document fragments - if (cur.nodeType < 11 - && (pos ? pos.index(cur) > -1 - : - - // Don't pass - // non-elements to - // Sizzle - cur.nodeType === 1 - && jQuery.find - .matchesSelector( - cur, - selectors))) { - - matched.push(cur); - break; - } - } - } - - return this - .pushStack(matched.length > 1 ? jQuery - .uniqueSort(matched) - : matched); - }, - - // Determine the position of an element within - // the matched set of elements - index : function(elem) { - - // No argument, return index in parent - if (!elem) { - return (this[0] && this[0].parentNode) ? this - .first().prevAll().length - : -1; - } - - // index in selector - if (typeof elem === "string") { - return jQuery.inArray(this[0], - jQuery(elem)); - } - - // Locate the position of the desired - // element - return jQuery.inArray( - - // If it receives a jQuery object, the first - // element is used - elem.jquery ? elem[0] : elem, this); - }, - - add : function(selector, context) { - return this - .pushStack(jQuery - .uniqueSort(jQuery.merge( - this.get(), jQuery( - selector, - context)))); - }, - - addBack : function(selector) { - return this - .add(selector == null ? this.prevObject - : this.prevObject - .filter(selector)); - } - }); - - function sibling(cur, dir) { - do { - cur = cur[dir]; - } while (cur && cur.nodeType !== 1); - - return cur; - } - - jQuery - .each( - { - parent : function(elem) { - var parent = elem.parentNode; - return parent - && parent.nodeType !== 11 ? parent - : null; - }, - parents : function(elem) { - return dir(elem, "parentNode"); - }, - parentsUntil : function(elem, i, until) { - return dir(elem, "parentNode", - until); - }, - next : function(elem) { - return sibling(elem, "nextSibling"); - }, - prev : function(elem) { - return sibling(elem, - "previousSibling"); - }, - nextAll : function(elem) { - return dir(elem, "nextSibling"); - }, - prevAll : function(elem) { - return dir(elem, "previousSibling"); - }, - nextUntil : function(elem, i, until) { - return dir(elem, "nextSibling", - until); - }, - prevUntil : function(elem, i, until) { - return dir(elem, "previousSibling", - until); - }, - siblings : function(elem) { - return siblings( - (elem.parentNode || {}).firstChild, - elem); - }, - children : function(elem) { - return siblings(elem.firstChild); - }, - contents : function(elem) { - return jQuery.nodeName(elem, - "iframe") ? elem.contentDocument - || elem.contentWindow.document - : jQuery.merge([], - elem.childNodes); - } - }, - function(name, fn) { - jQuery.fn[name] = function(until, - selector) { - var ret = jQuery.map(this, fn, - until); - - if (name.slice(-5) !== "Until") { - selector = until; - } - - if (selector - && typeof selector === "string") { - ret = jQuery.filter(selector, - ret); - } - - if (this.length > 1) { - - // Remove duplicates - if (!guaranteedUnique[name]) { - ret = jQuery - .uniqueSort(ret); - } - - // Reverse order for parents* - // and prev-derivatives - if (rparentsprev.test(name)) { - ret = ret.reverse(); - } - } - - return this.pushStack(ret); - }; - }); - var rnotwhite = (/\S+/g); - - // Convert String-formatted options into Object-formatted - // ones - function createOptions(options) { - var object = {}; - jQuery.each(options.match(rnotwhite) || [], function(_, - flag) { - object[flag] = true; - }); - return object; - } - - /* - * Create a callback list using the following parameters: - * - * options: an optional list of space-separated options that - * will change how the callback list behaves or a more - * traditional option object - * - * By default a callback list will act like an event - * callback list and can be "fired" multiple times. - * - * Possible options: - * - * once: will ensure the callback list can only be fired - * once (like a Deferred) - * - * memory: will keep track of previous values and will call - * any callback added after the list has been fired right - * away with the latest "memorized" values (like a Deferred) - * - * unique: will ensure a callback can only be added once (no - * duplicate in the list) - * - * stopOnFalse: interrupt callings when a callback returns - * false - * - */ - jQuery.Callbacks = function(options) { - - // Convert options from String-formatted to - // Object-formatted if needed - // (we check in cache first) - options = typeof options === "string" ? createOptions(options) - : jQuery.extend({}, options); - - var // Flag to know if list is currently firing - firing, - - // Last fire value for non-forgettable lists - memory, - - // Flag to know if list was already fired - fired, - - // Flag to prevent firing - locked, - - // Actual callback list - list = [], - - // Queue of execution data for repeatable lists - queue = [], - - // Index of currently firing callback (modified by - // add/remove as needed) - firingIndex = -1, - - // Fire callbacks - fire = function() { - - // Enforce single-firing - locked = options.once; - - // Execute callbacks for all pending executions, - // respecting firingIndex overrides and runtime - // changes - fired = firing = true; - for (; queue.length; firingIndex = -1) { - memory = queue.shift(); - while (++firingIndex < list.length) { - - // Run callback and check for early - // termination - if (list[firingIndex].apply(memory[0], - memory[1]) === false - && options.stopOnFalse) { - - // Jump to end and forget the data so - // .add doesn't re-fire - firingIndex = list.length; - memory = false; - } - } - } - - // Forget the data if we're done with it - if (!options.memory) { - memory = false; - } - - firing = false; - - // Clean up if we're done firing for good - if (locked) { - - // Keep an empty list if we have data for future - // add calls - if (memory) { - list = []; - - // Otherwise, this object is spent - } else { - list = ""; - } - } - }, - - // Actual Callbacks object - self = { - - // Add a callback or a collection of callbacks to - // the list - add : function() { - if (list) { - - // If we have memory from a past run, we - // should fire after adding - if (memory && !firing) { - firingIndex = list.length - 1; - queue.push(memory); - } - - (function add(args) { - jQuery - .each( - args, - function(_, arg) { - if (jQuery - .isFunction(arg)) { - if (!options.unique - || !self - .has(arg)) { - list - .push(arg); - } - } else if (arg - && arg.length - && jQuery - .type(arg) !== "string") { - - // Inspect - // recursively - add(arg); - } - }); - })(arguments); - - if (memory && !firing) { - fire(); - } - } - return this; - }, - - // Remove a callback from the list - remove : function() { - jQuery.each(arguments, function(_, arg) { - var index; - while ((index = jQuery.inArray(arg, list, - index)) > -1) { - list.splice(index, 1); - - // Handle firing indexes - if (index <= firingIndex) { - firingIndex--; - } - } - }); - return this; - }, - - // Check if a given callback is in the list. - // If no argument is given, return whether or not - // list has callbacks attached. - has : function(fn) { - return fn ? jQuery.inArray(fn, list) > -1 - : list.length > 0; - }, - - // Remove all callbacks from the list - empty : function() { - if (list) { - list = []; - } - return this; - }, - - // Disable .fire and .add - // Abort any current/pending executions - // Clear all callbacks and values - disable : function() { - locked = queue = []; - list = memory = ""; - return this; - }, - disabled : function() { - return !list; - }, - - // Disable .fire - // Also disable .add unless we have memory (since it - // would have no effect) - // Abort any pending executions - lock : function() { - locked = true; - if (!memory) { - self.disable(); - } - return this; - }, - locked : function() { - return !!locked; - }, - - // Call all callbacks with the given context and - // arguments - fireWith : function(context, args) { - if (!locked) { - args = args || []; - args = [ context, - args.slice ? args.slice() : args ]; - queue.push(args); - if (!firing) { - fire(); - } - } - return this; - }, - - // Call all the callbacks with the given arguments - fire : function() { - self.fireWith(this, arguments); - return this; - }, - - // To know if the callbacks have already been called - // at least once - fired : function() { - return !!fired; - } - }; - - return self; - }; - - jQuery - .extend({ - - Deferred : function(func) { - var tuples = [ - - // action, add listener, listener - // list, final state - [ - "resolve", - "done", - jQuery - .Callbacks("once memory"), - "resolved" ], - [ - "reject", - "fail", - jQuery - .Callbacks("once memory"), - "rejected" ], - [ "notify", "progress", - jQuery.Callbacks("memory") ] ], state = "pending", promise = { - state : function() { - return state; - }, - always : function() { - deferred.done(arguments).fail( - arguments); - return this; - }, - then : function( /* - * fnDone, fnFail, - * fnProgress - */) { - var fns = arguments; - return jQuery - .Deferred( - function(newDefer) { - jQuery - .each( - tuples, - function( - i, - tuple) { - var fn = jQuery - .isFunction(fns[i]) - && fns[i]; - - // deferred[ - // done - // | - // fail - // | - // progress - // ] - // for - // forwarding - // actions - // to - // newDefer - deferred[tuple[1]] - (function() { - var returned = fn - && fn - .apply( - this, - arguments); - if (returned - && jQuery - .isFunction(returned.promise)) { - returned - .promise() - .progress( - newDefer.notify) - .done( - newDefer.resolve) - .fail( - newDefer.reject); - } else { - newDefer[tuple[0] - + "With"] - ( - this === promise ? newDefer - .promise() - : this, - fn ? [ returned ] - : arguments); - } - }); - }); - fns = null; - }).promise(); - }, - - // Get a promise for this deferred - // If obj is provided, the promise - // aspect is added to the object - promise : function(obj) { - return obj != null ? jQuery.extend( - obj, promise) : promise; - } - }, deferred = {}; - - // Keep pipe for back-compat - promise.pipe = promise.then; - - // Add list-specific methods - jQuery - .each( - tuples, - function(i, tuple) { - var list = tuple[2], stateString = tuple[3]; - - // promise[ done | fail - // | progress ] = - // list.add - promise[tuple[1]] = list.add; - - // Handle state - if (stateString) { - list - .add( - function() { - - // state - // = [ - // resolved - // | - // rejected - // ] - state = stateString; - - // [ - // reject_list - // | - // resolve_list - // ].disable; - // progress_list.lock - }, - tuples[i ^ 1][2].disable, - tuples[2][2].lock); - } - - // deferred[ resolve | - // reject | notify ] - deferred[tuple[0]] = function() { - deferred[tuple[0] - + "With"] - ( - this === deferred ? promise - : this, - arguments); - return this; - }; - deferred[tuple[0] - + "With"] = list.fireWith; - }); - - // Make the deferred a promise - promise.promise(deferred); - - // Call given func if any - if (func) { - func.call(deferred, deferred); - } - - // All done! - return deferred; - }, - - // Deferred helper - when : function(subordinate /* - * , ..., - * subordinateN - */) { - var i = 0, resolveValues = slice - .call(arguments), length = resolveValues.length, - - // the count of uncompleted subordinates - remaining = length !== 1 - || (subordinate && jQuery - .isFunction(subordinate.promise)) ? length - : 0, - - // the master Deferred. - // If resolveValues consist of only a single - // Deferred, just use that. - deferred = remaining === 1 ? subordinate - : jQuery.Deferred(), - - // Update function for both resolve and - // progress values - updateFunc = function(i, contexts, values) { - return function(value) { - contexts[i] = this; - values[i] = arguments.length > 1 ? slice - .call(arguments) - : value; - if (values === progressValues) { - deferred.notifyWith(contexts, - values); - - } else if (!(--remaining)) { - deferred.resolveWith(contexts, - values); - } - }; - }, - - progressValues, progressContexts, resolveContexts; - - // add listeners to Deferred subordinates; - // treat others as resolved - if (length > 1) { - progressValues = new Array(length); - progressContexts = new Array(length); - resolveContexts = new Array(length); - for (; i < length; i++) { - if (resolveValues[i] - && jQuery - .isFunction(resolveValues[i].promise)) { - resolveValues[i] - .promise() - .progress( - updateFunc( - i, - progressContexts, - progressValues)) - .done( - updateFunc( - i, - resolveContexts, - resolveValues)) - .fail(deferred.reject); - } else { - --remaining; - } - } - } - - // if we're not waiting on anything, resolve - // the master - if (!remaining) { - deferred.resolveWith(resolveContexts, - resolveValues); - } - - return deferred.promise(); - } - }); - - // The deferred used on DOM ready - var readyList; - - jQuery.fn.ready = function(fn) { - - // Add the callback - jQuery.ready.promise().done(fn); - - return this; - }; - - jQuery.extend({ - - // Is the DOM ready to be used? Set to true once it - // occurs. - isReady : false, - - // A counter to track how many items to wait for before - // the ready event fires. See #6781 - readyWait : 1, - - // Hold (or release) the ready event - holdReady : function(hold) { - if (hold) { - jQuery.readyWait++; - } else { - jQuery.ready(true); - } - }, - - // Handle when the DOM is ready - ready : function(wait) { - - // Abort if there are pending holds or we're already - // ready - if (wait === true ? --jQuery.readyWait - : jQuery.isReady) { - return; - } - - // Remember that the DOM is ready - jQuery.isReady = true; - - // If a normal DOM Ready event fired, decrement, and - // wait if need be - if (wait !== true && --jQuery.readyWait > 0) { - return; - } - - // If there are functions bound, to execute - readyList.resolveWith(document, [ jQuery ]); - - // Trigger any bound ready events - if (jQuery.fn.triggerHandler) { - jQuery(document).triggerHandler("ready"); - jQuery(document).off("ready"); - } - } - }); - - /** - * Clean-up method for dom ready events - */ - function detach() { - if (document.addEventListener) { - document.removeEventListener("DOMContentLoaded", - completed); - window.removeEventListener("load", completed); - - } else { - document.detachEvent("onreadystatechange", - completed); - window.detachEvent("onload", completed); - } - } - - /** - * The ready event handler and self cleanup method - */ - function completed() { - - // readyState === "complete" is good enough for us to - // call the dom ready in oldIE - if (document.addEventListener - || window.event.type === "load" - || document.readyState === "complete") { - - detach(); - jQuery.ready(); - } - } - - jQuery.ready.promise = function(obj) { - if (!readyList) { - - readyList = jQuery.Deferred(); - - // Catch cases where $(document).ready() is called - // after the browser event has already occurred. - // Support: IE6-10 - // Older IE sometimes signals "interactive" too soon - if (document.readyState === "complete" - || (document.readyState !== "loading" && !document.documentElement.doScroll)) { - - // Handle it asynchronously to allow scripts the - // opportunity to delay ready - window.setTimeout(jQuery.ready); - - // Standards-based browsers support - // DOMContentLoaded - } else if (document.addEventListener) { - - // Use the handy event callback - document.addEventListener("DOMContentLoaded", - completed); - - // A fallback to window.onload, that will always - // work - window.addEventListener("load", completed); - - // If IE event model is used - } else { - - // Ensure firing before onload, maybe late but - // safe also for iframes - document.attachEvent("onreadystatechange", - completed); - - // A fallback to window.onload, that will always - // work - window.attachEvent("onload", completed); - - // If IE and not a frame - // continually check to see if the document is - // ready - var top = false; - - try { - top = window.frameElement == null - && document.documentElement; - } catch (e) { - } - - if (top && top.doScroll) { - (function doScrollCheck() { - if (!jQuery.isReady) { - - try { - - // Use the trick by Diego Perini - // http://javascript.nwbox.com/IEContentLoaded/ - top.doScroll("left"); - } catch (e) { - return window.setTimeout( - doScrollCheck, 50); - } - - // detach all dom ready events - detach(); - - // and execute any waiting functions - jQuery.ready(); - } - })(); - } - } - } - return readyList.promise(obj); - }; - - // Kick off the DOM ready check even if the user does not - jQuery.ready.promise(); - - // Support: IE<9 - // Iteration over object's inherited properties before its - // own - var i; - for (i in jQuery(support)) { - break; - } - support.ownFirst = i === "0"; - - // Note: most support tests are defined in their respective - // modules. - // false until the test is run - support.inlineBlockNeedsLayout = false; - - // Execute ASAP in case we need to set body.style.zoom - jQuery(function() { - - // Minified: var a,b,c,d - var val, div, body, container; - - body = document.getElementsByTagName("body")[0]; - if (!body || !body.style) { - - // Return for frameset docs that don't have a body - return; - } - - // Setup - div = document.createElement("div"); - container = document.createElement("div"); - container.style.cssText = "position:absolute;border:0;width:0;height:0;top:0;left:-9999px"; - body.appendChild(container).appendChild(div); - - if (typeof div.style.zoom !== "undefined") { - - // Support: IE<8 - // Check if natively block-level elements act like - // inline-block - // elements when setting their display to 'inline' - // and giving - // them layout - div.style.cssText = "display:inline;margin:0;border:0;padding:1px;width:1px;zoom:1"; - - support.inlineBlockNeedsLayout = val = div.offsetWidth === 3; - if (val) { - - // Prevent IE 6 from affecting layout for - // positioned elements #11048 - // Prevent IE from shrinking the body in IE 7 - // mode #12869 - // Support: IE<8 - body.style.zoom = 1; - } - } - - body.removeChild(container); - }); - - (function() { - var div = document.createElement("div"); - - // Support: IE<9 - support.deleteExpando = true; - try { - delete div.test; - } catch (e) { - support.deleteExpando = false; - } - - // Null elements to avoid leaks in IE. - div = null; - })(); - var acceptData = function(elem) { - var noData = jQuery.noData[(elem.nodeName + " ") - .toLowerCase()], nodeType = +elem.nodeType || 1; - - // Do not set data on non-element DOM nodes because it - // will not be cleared (#8335). - return nodeType !== 1 && nodeType !== 9 ? false : - - // Nodes accept data unless otherwise specified; - // rejection can be conditional - !noData || noData !== true - && elem.getAttribute("classid") === noData; - }; - - var rbrace = /^(?:\{[\w\W]*\}|\[[\w\W]*\])$/, rmultiDash = /([A-Z])/g; - - function dataAttr(elem, key, data) { - - // If nothing was found internally, try to fetch any - // data from the HTML5 data-* attribute - if (data === undefined && elem.nodeType === 1) { - - var name = "data-" - + key.replace(rmultiDash, "-$1") - .toLowerCase(); - - data = elem.getAttribute(name); - - if (typeof data === "string") { - try { - data = data === "true" ? true - : data === "false" ? false - : data === "null" ? null - : - - // Only convert to a - // number if it - // doesn't change - // the string - +data + "" === data ? +data - : rbrace - .test(data) ? jQuery - .parseJSON(data) - : data; - } catch (e) { - } - - // Make sure we set the data so it isn't changed - // later - jQuery.data(elem, key, data); - - } else { - data = undefined; - } - } - - return data; - } - - // checks a cache object for emptiness - function isEmptyDataObject(obj) { - var name; - for (name in obj) { - - // if the public data object is empty, the private - // is still empty - if (name === "data" - && jQuery.isEmptyObject(obj[name])) { - continue; - } - if (name !== "toJSON") { - return false; - } - } - - return true; - } - - function internalData(elem, name, data, pvt /* - * Internal Use - * Only - */) { - if (!acceptData(elem)) { - return; - } - - var ret, thisCache, internalKey = jQuery.expando, - - // We have to handle DOM nodes and JS objects - // differently because IE6-7 - // can't GC object references properly across the DOM-JS - // boundary - isNode = elem.nodeType, - - // Only DOM nodes need the global jQuery cache; JS - // object data is - // attached directly to the object so GC can occur - // automatically - cache = isNode ? jQuery.cache : elem, - - // Only defining an ID for JS objects if its cache - // already exists allows - // the code to shortcut on the same path as a DOM node - // with no cache - id = isNode ? elem[internalKey] : elem[internalKey] - && internalKey; - - // Avoid doing any more work than we need to when trying - // to get data on an - // object that has no data at all - if ((!id || !cache[id] || (!pvt && !cache[id].data)) - && data === undefined - && typeof name === "string") { - return; - } - - if (!id) { - - // Only DOM nodes need a new unique ID for each - // element since their data - // ends up in the global cache - if (isNode) { - id = elem[internalKey] = deletedIds.pop() - || jQuery.guid++; - } else { - id = internalKey; - } - } - - if (!cache[id]) { - - // Avoid exposing jQuery metadata on plain JS - // objects when the object - // is serialized using JSON.stringify - cache[id] = isNode ? {} : { - toJSON : jQuery.noop - }; - } - - // An object can be passed to jQuery.data instead of a - // key/value pair; this gets - // shallow copied over onto the existing cache - if (typeof name === "object" - || typeof name === "function") { - if (pvt) { - cache[id] = jQuery.extend(cache[id], name); - } else { - cache[id].data = jQuery.extend(cache[id].data, - name); - } - } - - thisCache = cache[id]; - - // jQuery data() is stored in a separate object inside - // the object's internal data - // cache in order to avoid key collisions between - // internal data and user-defined - // data. - if (!pvt) { - if (!thisCache.data) { - thisCache.data = {}; - } - - thisCache = thisCache.data; - } - - if (data !== undefined) { - thisCache[jQuery.camelCase(name)] = data; - } - - // Check for both converted-to-camel and non-converted - // data property names - // If a data property was specified - if (typeof name === "string") { - - // First Try to find as-is property data - ret = thisCache[name]; - - // Test for null|undefined property data - if (ret == null) { - - // Try to find the camelCased property - ret = thisCache[jQuery.camelCase(name)]; - } - } else { - ret = thisCache; - } - - return ret; - } - - function internalRemoveData(elem, name, pvt) { - if (!acceptData(elem)) { - return; - } - - var thisCache, i, isNode = elem.nodeType, - - // See jQuery.data for more information - cache = isNode ? jQuery.cache : elem, id = isNode ? elem[jQuery.expando] - : jQuery.expando; - - // If there is already no cache entry for this object, - // there is no - // purpose in continuing - if (!cache[id]) { - return; - } - - if (name) { - - thisCache = pvt ? cache[id] : cache[id].data; - - if (thisCache) { - - // Support array or space separated string names - // for data keys - if (!jQuery.isArray(name)) { - - // try the string as a key before any - // manipulation - if (name in thisCache) { - name = [ name ]; - } else { - - // split the camel cased version by - // spaces unless a key with the spaces - // exists - name = jQuery.camelCase(name); - if (name in thisCache) { - name = [ name ]; - } else { - name = name.split(" "); - } - } - } else { - - // If "name" is an array of keys... - // When data is initially created, via - // ("key", "val") signature, - // keys will be converted to camelCase. - // Since there is no way to tell _how_ a key - // was added, remove - // both plain key and camelCase key. #12786 - // This will only penalize the array - // argument path. - name = name.concat(jQuery.map(name, - jQuery.camelCase)); - } - - i = name.length; - while (i--) { - delete thisCache[name[i]]; - } - - // If there is no data left in the cache, we - // want to continue - // and let the cache object itself get destroyed - if (pvt ? !isEmptyDataObject(thisCache) - : !jQuery.isEmptyObject(thisCache)) { - return; - } - } - } - - // See jQuery.data for more information - if (!pvt) { - delete cache[id].data; - - // Don't destroy the parent cache unless the - // internal data object - // had been the only thing left in it - if (!isEmptyDataObject(cache[id])) { - return; - } - } - - // Destroy the cache - if (isNode) { - jQuery.cleanData([ elem ], true); - - // Use delete when supported for expandos or `cache` - // is not a window per isWindow (#10080) - /* jshint eqeqeq: false */ - } else if (support.deleteExpando - || cache != cache.window) { - /* jshint eqeqeq: true */ - delete cache[id]; - - // When all else fails, undefined - } else { - cache[id] = undefined; - } - } - - jQuery - .extend({ - cache : {}, - - // The following elements (space-suffixed to - // avoid Object.prototype collisions) - // throw uncatchable exceptions if you attempt - // to set expando properties - noData : { - "applet " : true, - "embed " : true, - - // ...but Flash objects (which have this - // classid) *can* handle expandos - "object " : "clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" - }, - - hasData : function(elem) { - elem = elem.nodeType ? jQuery.cache[elem[jQuery.expando]] - : elem[jQuery.expando]; - return !!elem && !isEmptyDataObject(elem); - }, - - data : function(elem, name, data) { - return internalData(elem, name, data); - }, - - removeData : function(elem, name) { - return internalRemoveData(elem, name); - }, - - // For internal use only. - _data : function(elem, name, data) { - return internalData(elem, name, data, true); - }, - - _removeData : function(elem, name) { - return internalRemoveData(elem, name, true); - } - }); - - jQuery.fn - .extend({ - data : function(key, value) { - var i, name, data, elem = this[0], attrs = elem - && elem.attributes; - - // Special expections of .data basically - // thwart jQuery.access, - // so implement the relevant behavior - // ourselves - - // Gets all values - if (key === undefined) { - if (this.length) { - data = jQuery.data(elem); - - if (elem.nodeType === 1 - && !jQuery._data(elem, - "parsedAttrs")) { - i = attrs.length; - while (i--) { - - // Support: IE11+ - // The attrs elements can be - // null (#14894) - if (attrs[i]) { - name = attrs[i].name; - if (name - .indexOf("data-") === 0) { - name = jQuery - .camelCase(name - .slice(5)); - dataAttr(elem, - name, - data[name]); - } - } - } - jQuery._data(elem, - "parsedAttrs", true); - } - } - - return data; - } - - // Sets multiple values - if (typeof key === "object") { - return this.each(function() { - jQuery.data(this, key); - }); - } - - return arguments.length > 1 ? - - // Sets one value - this.each(function() { - jQuery.data(this, key, value); - }) : - - // Gets one value - // Try to fetch any internally stored data - // first - elem ? dataAttr(elem, key, jQuery.data( - elem, key)) : undefined; - }, - - removeData : function(key) { - return this.each(function() { - jQuery.removeData(this, key); - }); - } - }); - - jQuery - .extend({ - queue : function(elem, type, data) { - var queue; - - if (elem) { - type = (type || "fx") + "queue"; - queue = jQuery._data(elem, type); - - // Speed up dequeue by getting out - // quickly if this is just a lookup - if (data) { - if (!queue || jQuery.isArray(data)) { - queue = jQuery._data(elem, - type, - jQuery.makeArray(data)); - } else { - queue.push(data); - } - } - return queue || []; - } - }, - - dequeue : function(elem, type) { - type = type || "fx"; - - var queue = jQuery.queue(elem, type), startLength = queue.length, fn = queue - .shift(), hooks = jQuery - ._queueHooks(elem, type), next = function() { - jQuery.dequeue(elem, type); - }; - - // If the fx queue is dequeued, always - // remove the progress sentinel - if (fn === "inprogress") { - fn = queue.shift(); - startLength--; - } - - if (fn) { - - // Add a progress sentinel to prevent - // the fx queue from being - // automatically dequeued - if (type === "fx") { - queue.unshift("inprogress"); - } - - // clear up the last queue stop function - delete hooks.stop; - fn.call(elem, next, hooks); - } - - if (!startLength && hooks) { - hooks.empty.fire(); - } - }, - - // not intended for public consumption - - // generates a queueHooks object, - // or returns the current one - _queueHooks : function(elem, type) { - var key = type + "queueHooks"; - return jQuery._data(elem, key) - || jQuery - ._data( - elem, - key, - { - empty : jQuery - .Callbacks( - "once memory") - .add( - function() { - jQuery - ._removeData( - elem, - type - + "queue"); - jQuery - ._removeData( - elem, - key); - }) - }); - } - }); - - jQuery.fn - .extend({ - queue : function(type, data) { - var setter = 2; - - if (typeof type !== "string") { - data = type; - type = "fx"; - setter--; - } - - if (arguments.length < setter) { - return jQuery.queue(this[0], type); - } - - return data === undefined ? this - : this - .each(function() { - var queue = jQuery - .queue(this, - type, - data); - - // ensure a hooks for - // this queue - jQuery._queueHooks( - this, type); - - if (type === "fx" - && queue[0] !== "inprogress") { - jQuery.dequeue( - this, type); - } - }); - }, - dequeue : function(type) { - return this.each(function() { - jQuery.dequeue(this, type); - }); - }, - clearQueue : function(type) { - return this.queue(type || "fx", []); - }, - - // Get a promise resolved when queues of a - // certain type - // are emptied (fx is the type by default) - promise : function(type, obj) { - var tmp, count = 1, defer = jQuery - .Deferred(), elements = this, i = this.length, resolve = function() { - if (!(--count)) { - defer.resolveWith(elements, - [ elements ]); - } - }; - - if (typeof type !== "string") { - obj = type; - type = undefined; - } - type = type || "fx"; - - while (i--) { - tmp = jQuery._data(elements[i], type - + "queueHooks"); - if (tmp && tmp.empty) { - count++; - tmp.empty.add(resolve); - } - } - resolve(); - return defer.promise(obj); - } - }); - - (function() { - var shrinkWrapBlocksVal; - - support.shrinkWrapBlocks = function() { - if (shrinkWrapBlocksVal != null) { - return shrinkWrapBlocksVal; - } - - // Will be changed later if needed. - shrinkWrapBlocksVal = false; - - // Minified: var b,c,d - var div, body, container; - - body = document.getElementsByTagName("body")[0]; - if (!body || !body.style) { - - // Test fired too early or in an unsupported - // environment, exit. - return; - } - - // Setup - div = document.createElement("div"); - container = document.createElement("div"); - container.style.cssText = "position:absolute;border:0;width:0;height:0;top:0;left:-9999px"; - body.appendChild(container).appendChild(div); - - // Support: IE6 - // Check if elements with layout shrink-wrap their - // children - if (typeof div.style.zoom !== "undefined") { - - // Reset CSS: box-sizing; display; margin; - // border - div.style.cssText = - - // Support: Firefox<29, Android 2.3 - // Vendor-prefix box-sizing - "-webkit-box-sizing:content-box;-moz-box-sizing:content-box;" - + "box-sizing:content-box;display:block;margin:0;border:0;" - + "padding:1px;width:1px;zoom:1"; - div.appendChild(document.createElement("div")).style.width = "5px"; - shrinkWrapBlocksVal = div.offsetWidth !== 3; - } - - body.removeChild(container); - - return shrinkWrapBlocksVal; - }; - - })(); - var pnum = (/[+-]?(?:\d*\.|)\d+(?:[eE][+-]?\d+|)/).source; - - var rcssNum = new RegExp("^(?:([+-])=|)(" + pnum - + ")([a-z%]*)$", "i"); - - var cssExpand = [ "Top", "Right", "Bottom", "Left" ]; - - var isHidden = function(elem, el) { - - // isHidden might be called from jQuery#filter function; - // in that case, element will be second argument - elem = el || elem; - return jQuery.css(elem, "display") === "none" - || !jQuery.contains(elem.ownerDocument, elem); - }; - - function adjustCSS(elem, prop, valueParts, tween) { - var adjusted, scale = 1, maxIterations = 20, currentValue = tween ? function() { - return tween.cur(); - } - : function() { - return jQuery.css(elem, prop, ""); - }, initial = currentValue(), unit = valueParts - && valueParts[3] - || (jQuery.cssNumber[prop] ? "" : "px"), - - // Starting value computation is required for potential - // unit mismatches - initialInUnit = (jQuery.cssNumber[prop] || unit !== "px" - && +initial) - && rcssNum.exec(jQuery.css(elem, prop)); - - if (initialInUnit && initialInUnit[3] !== unit) { - - // Trust units reported by jQuery.css - unit = unit || initialInUnit[3]; - - // Make sure we update the tween properties later on - valueParts = valueParts || []; - - // Iteratively approximate from a nonzero starting - // point - initialInUnit = +initial || 1; - - do { - - // If previous iteration zeroed out, double - // until we get *something*. - // Use string for doubling so we don't - // accidentally see scale as unchanged below - scale = scale || ".5"; - - // Adjust and apply - initialInUnit = initialInUnit / scale; - jQuery.style(elem, prop, initialInUnit + unit); - - // Update scale, tolerating zero or NaN from - // tween.cur() - // Break the loop if scale is unchanged or - // perfect, or if we've just had enough. - } while (scale !== (scale = currentValue() - / initial) - && scale !== 1 && --maxIterations); - } - - if (valueParts) { - initialInUnit = +initialInUnit || +initial || 0; - - // Apply relative offset (+=/-=) if specified - adjusted = valueParts[1] ? initialInUnit - + (valueParts[1] + 1) * valueParts[2] - : +valueParts[2]; - if (tween) { - tween.unit = unit; - tween.start = initialInUnit; - tween.end = adjusted; - } - } - return adjusted; - } - - // Multifunctional method to get and set values of a - // collection - // The value/s can optionally be executed if it's a function - var access = function(elems, fn, key, value, chainable, - emptyGet, raw) { - var i = 0, length = elems.length, bulk = key == null; - - // Sets many values - if (jQuery.type(key) === "object") { - chainable = true; - for (i in key) { - access(elems, fn, i, key[i], true, emptyGet, - raw); - } - - // Sets one value - } else if (value !== undefined) { - chainable = true; - - if (!jQuery.isFunction(value)) { - raw = true; - } - - if (bulk) { - - // Bulk operations run against the entire set - if (raw) { - fn.call(elems, value); - fn = null; - - // ...except when executing function values - } else { - bulk = fn; - fn = function(elem, key, value) { - return bulk.call(jQuery(elem), value); - }; - } - } - - if (fn) { - for (; i < length; i++) { - fn(elems[i], key, raw ? value : value.call( - elems[i], i, fn(elems[i], key))); - } - } - } - - return chainable ? elems : - - // Gets - bulk ? fn.call(elems) : length ? fn(elems[0], key) - : emptyGet; - }; - var rcheckableType = (/^(?:checkbox|radio)$/i); - - var rtagName = (/<([\w:-]+)/); - - var rscriptType = (/^$|\/(?:java|ecma)script/i); - - var rleadingWhitespace = (/^\s+/); - - var nodeNames = "abbr|article|aside|audio|bdi|canvas|data|datalist|" - + "details|dialog|figcaption|figure|footer|header|hgroup|main|" - + "mark|meter|nav|output|picture|progress|section|summary|template|time|video"; - - function createSafeFragment(document) { - var list = nodeNames.split("|"), safeFrag = document - .createDocumentFragment(); - - if (safeFrag.createElement) { - while (list.length) { - safeFrag.createElement(list.pop()); - } - } - return safeFrag; - } - - (function() { - var div = document.createElement("div"), fragment = document - .createDocumentFragment(), input = document - .createElement("input"); - - // Setup - div.innerHTML = "
a"; - - // IE strips leading whitespace when .innerHTML is used - support.leadingWhitespace = div.firstChild.nodeType === 3; - - // Make sure that tbody elements aren't automatically - // inserted - // IE will insert them into empty tables - support.tbody = !div.getElementsByTagName("tbody").length; - - // Make sure that link elements get serialized correctly - // by innerHTML - // This requires a wrapper element in IE - support.htmlSerialize = !!div - .getElementsByTagName("link").length; - - // Makes sure cloning an html5 element does not cause - // problems - // Where outerHTML is undefined, this still works - support.html5Clone = document.createElement("nav") - .cloneNode(true).outerHTML !== "<:nav>"; - - // Check if a disconnected checkbox will retain its - // checked - // value of true after appended to the DOM (IE6/7) - input.type = "checkbox"; - input.checked = true; - fragment.appendChild(input); - support.appendChecked = input.checked; - - // Make sure textarea (and checkbox) defaultValue is - // properly cloned - // Support: IE6-IE11+ - div.innerHTML = ""; - support.noCloneChecked = !!div.cloneNode(true).lastChild.defaultValue; - - // #11217 - WebKit loses check when the name is after - // the checked attribute - fragment.appendChild(div); - - // Support: Windows Web Apps (WWA) - // `name` and `type` must use .setAttribute for WWA - // (#14901) - input = document.createElement("input"); - input.setAttribute("type", "radio"); - input.setAttribute("checked", "checked"); - input.setAttribute("name", "t"); - - div.appendChild(input); - - // Support: Safari 5.1, iOS 5.1, Android 4.x, Android - // 2.3 - // old WebKit doesn't clone checked state correctly in - // fragments - support.checkClone = div.cloneNode(true) - .cloneNode(true).lastChild.checked; - - // Support: IE<9 - // Cloned elements keep attachEvent handlers, we use - // addEventListener on IE9+ - support.noCloneEvent = !!div.addEventListener; - - // Support: IE<9 - // Since attributes and properties are the same in IE, - // cleanData must set properties to undefined rather - // than use removeAttribute - div[jQuery.expando] = 1; - support.attributes = !div.getAttribute(jQuery.expando); - })(); - - // We have to close these tags to support XHTML (#13200) - var wrapMap = { - option : [ 1, "" ], - legend : [ 1, "
", "
" ], - area : [ 1, "", "" ], - - // Support: IE8 - param : [ 1, "", "" ], - thead : [ 1, "", "
" ], - tr : [ 2, "", "
" ], - col : [ 2, "", - "
" ], - td : [ 3, "", "
" ], - - // IE6-8 can't serialize link, script, style, or any - // html5 (NoScope) tags, - // unless wrapped in a div with non-breaking characters - // in front of it. - _default : support.htmlSerialize ? [ 0, "", "" ] : [ 1, - "X
", "
" ] - }; - - // Support: IE8-IE9 - wrapMap.optgroup = wrapMap.option; - - wrapMap.tbody = wrapMap.tfoot = wrapMap.colgroup = wrapMap.caption = wrapMap.thead; - wrapMap.th = wrapMap.td; - - function getAll(context, tag) { - var elems, elem, i = 0, found = typeof context.getElementsByTagName !== "undefined" ? context - .getElementsByTagName(tag || "*") - : typeof context.querySelectorAll !== "undefined" ? context - .querySelectorAll(tag || "*") - : undefined; - - if (!found) { - for (found = [], elems = context.childNodes - || context; (elem = elems[i]) != null; i++) { - if (!tag || jQuery.nodeName(elem, tag)) { - found.push(elem); - } else { - jQuery.merge(found, getAll(elem, tag)); - } - } - } - - return tag === undefined || tag - && jQuery.nodeName(context, tag) ? jQuery - .merge([ context ], found) : found; - } - - // Mark scripts as having already been evaluated - function setGlobalEval(elems, refElements) { - var elem, i = 0; - for (; (elem = elems[i]) != null; i++) { - jQuery._data(elem, "globalEval", !refElements - || jQuery._data(refElements[i], - "globalEval")); - } - } - - var rhtml = /<|&#?\w+;/, rtbody = / from - // table fragments - if (!support.tbody) { - - // String was a , *may* have - // spurious - elem = tag === "table" - && !rtbody.test(elem) ? tmp.firstChild - : - - // String was a bare or - // - wrap[1] === "
" - && !rtbody.test(elem) ? tmp - : 0; - - j = elem && elem.childNodes.length; - while (j--) { - if (jQuery - .nodeName( - (tbody = elem.childNodes[j]), - "tbody") - && !tbody.childNodes.length) { - - elem.removeChild(tbody); - } - } - } - - jQuery.merge(nodes, tmp.childNodes); - - // Fix #12392 for WebKit and IE > 9 - tmp.textContent = ""; - - // Fix #12392 for oldIE - while (tmp.firstChild) { - tmp.removeChild(tmp.firstChild); - } - - // Remember the top-level container for - // proper cleanup - tmp = safe.lastChild; - } - } - } - - // Fix #11356: Clear elements from fragment - if (tmp) { - safe.removeChild(tmp); - } - - // Reset defaultChecked for any radios and checkboxes - // about to be appended to the DOM in IE 6/7 (#8060) - if (!support.appendChecked) { - jQuery.grep(getAll(nodes, "input"), - fixDefaultChecked); - } - - i = 0; - while ((elem = nodes[i++])) { - - // Skip elements already in the context collection - // (trac-4087) - if (selection - && jQuery.inArray(elem, selection) > -1) { - if (ignored) { - ignored.push(elem); - } - - continue; - } - - contains = jQuery - .contains(elem.ownerDocument, elem); - - // Append to fragment - tmp = getAll(safe.appendChild(elem), "script"); - - // Preserve script evaluation history - if (contains) { - setGlobalEval(tmp); - } - - // Capture executables - if (scripts) { - j = 0; - while ((elem = tmp[j++])) { - if (rscriptType.test(elem.type || "")) { - scripts.push(elem); - } - } - } - } - - tmp = null; - - return safe; - } - - (function() { - var i, eventName, div = document.createElement("div"); - - // Support: IE<9 (lack submit/change bubble), Firefox - // (lack focus(in | out) events) - for (i in { - submit : true, - change : true, - focusin : true - }) { - eventName = "on" + i; - - if (!(support[i] = eventName in window)) { - - // Beware of CSP restrictions - // (https://developer.mozilla.org/en/Security/CSP) - div.setAttribute(eventName, "t"); - support[i] = div.attributes[eventName].expando === false; - } - } - - // Null elements to avoid leaks in IE. - div = null; - })(); - - var rformElems = /^(?:input|select|textarea)$/i, rkeyEvent = /^key/, rmouseEvent = /^(?:mouse|pointer|contextmenu|drag|drop)|click/, rfocusMorph = /^(?:focusinfocus|focusoutblur)$/, rtypenamespace = /^([^.]*)(?:\.(.+)|)/; - - function returnTrue() { - return true; - } - - function returnFalse() { - return false; - } - - // Support: IE9 - // See #13393 for more info - function safeActiveElement() { - try { - return document.activeElement; - } catch (err) { - } - } - - function on(elem, types, selector, data, fn, one) { - var origFn, type; - - // Types can be a map of types/handlers - if (typeof types === "object") { - - // ( types-Object, selector, data ) - if (typeof selector !== "string") { - - // ( types-Object, data ) - data = data || selector; - selector = undefined; - } - for (type in types) { - on(elem, type, selector, data, types[type], one); - } - return elem; - } - - if (data == null && fn == null) { - - // ( types, fn ) - fn = selector; - data = selector = undefined; - } else if (fn == null) { - if (typeof selector === "string") { - - // ( types, selector, fn ) - fn = data; - data = undefined; - } else { - - // ( types, data, fn ) - fn = data; - data = selector; - selector = undefined; - } - } - if (fn === false) { - fn = returnFalse; - } else if (!fn) { - return elem; - } - - if (one === 1) { - origFn = fn; - fn = function(event) { - - // Can use an empty set, since event contains - // the info - jQuery().off(event); - return origFn.apply(this, arguments); - }; - - // Use same guid so caller can remove using origFn - fn.guid = origFn.guid - || (origFn.guid = jQuery.guid++); - } - return elem.each(function() { - jQuery.event.add(this, types, fn, data, selector); - }); - } - - /* - * Helper functions for managing events -- not part of the - * public interface. Props to Dean Edwards' addEvent library - * for many of the ideas. - */ - jQuery.event = { - - global : {}, - - add : function(elem, types, handler, data, selector) { - var tmp, events, t, handleObjIn, special, eventHandle, handleObj, handlers, type, namespaces, origType, elemData = jQuery - ._data(elem); - - // Don't attach events to noData or text/comment - // nodes (but allow plain objects) - if (!elemData) { - return; - } - - // Caller can pass in an object of custom data in - // lieu of the handler - if (handler.handler) { - handleObjIn = handler; - handler = handleObjIn.handler; - selector = handleObjIn.selector; - } - - // Make sure that the handler has a unique ID, used - // to find/remove it later - if (!handler.guid) { - handler.guid = jQuery.guid++; - } - - // Init the element's event structure and main - // handler, if this is the first - if (!(events = elemData.events)) { - events = elemData.events = {}; - } - if (!(eventHandle = elemData.handle)) { - eventHandle = elemData.handle = function(e) { - - // Discard the second event of a - // jQuery.event.trigger() and - // when an event is called after a page has - // unloaded - return typeof jQuery !== "undefined" - && (!e || jQuery.event.triggered !== e.type) ? jQuery.event.dispatch - .apply(eventHandle.elem, arguments) - : undefined; - }; - - // Add elem as a property of the handle fn to - // prevent a memory leak - // with IE non-native events - eventHandle.elem = elem; - } - - // Handle multiple events separated by a space - types = (types || "").match(rnotwhite) || [ "" ]; - t = types.length; - while (t--) { - tmp = rtypenamespace.exec(types[t]) || []; - type = origType = tmp[1]; - namespaces = (tmp[2] || "").split(".").sort(); - - // There *must* be a type, no attaching - // namespace-only handlers - if (!type) { - continue; - } - - // If event changes its type, use the special - // event handlers for the changed type - special = jQuery.event.special[type] || {}; - - // If selector defined, determine special event - // api type, otherwise given type - type = (selector ? special.delegateType - : special.bindType) - || type; - - // Update special based on newly reset type - special = jQuery.event.special[type] || {}; - - // handleObj is passed to all event handlers - handleObj = jQuery.extend({ - type : type, - origType : origType, - data : data, - handler : handler, - guid : handler.guid, - selector : selector, - needsContext : selector - && jQuery.expr.match.needsContext - .test(selector), - namespace : namespaces.join(".") - }, handleObjIn); - - // Init the event handler queue if we're the - // first - if (!(handlers = events[type])) { - handlers = events[type] = []; - handlers.delegateCount = 0; - - // Only use addEventListener/attachEvent if - // the special events handler returns false - if (!special.setup - || special.setup.call(elem, data, - namespaces, eventHandle) === false) { - - // Bind the global event handler to the - // element - if (elem.addEventListener) { - elem.addEventListener(type, - eventHandle, false); - - } else if (elem.attachEvent) { - elem.attachEvent("on" + type, - eventHandle); - } - } - } - - if (special.add) { - special.add.call(elem, handleObj); - - if (!handleObj.handler.guid) { - handleObj.handler.guid = handler.guid; - } - } - - // Add to the element's handler list, delegates - // in front - if (selector) { - handlers.splice(handlers.delegateCount++, - 0, handleObj); - } else { - handlers.push(handleObj); - } - - // Keep track of which events have ever been - // used, for event optimization - jQuery.event.global[type] = true; - } - - // Nullify elem to prevent memory leaks in IE - elem = null; - }, - - // Detach an event or set of events from an element - remove : function(elem, types, handler, selector, - mappedTypes) { - var j, handleObj, tmp, origCount, t, events, special, handlers, type, namespaces, origType, elemData = jQuery - .hasData(elem) - && jQuery._data(elem); - - if (!elemData || !(events = elemData.events)) { - return; - } - - // Once for each type.namespace in types; type may - // be omitted - types = (types || "").match(rnotwhite) || [ "" ]; - t = types.length; - while (t--) { - tmp = rtypenamespace.exec(types[t]) || []; - type = origType = tmp[1]; - namespaces = (tmp[2] || "").split(".").sort(); - - // Unbind all events (on this namespace, if - // provided) for the element - if (!type) { - for (type in events) { - jQuery.event.remove(elem, type - + types[t], handler, selector, - true); - } - continue; - } - - special = jQuery.event.special[type] || {}; - type = (selector ? special.delegateType - : special.bindType) - || type; - handlers = events[type] || []; - tmp = tmp[2] - && new RegExp("(^|\\.)" - + namespaces - .join("\\.(?:.*\\.|)") - + "(\\.|$)"); - - // Remove matching events - origCount = j = handlers.length; - while (j--) { - handleObj = handlers[j]; - - if ((mappedTypes || origType === handleObj.origType) - && (!handler || handler.guid === handleObj.guid) - && (!tmp || tmp - .test(handleObj.namespace)) - && (!selector - || selector === handleObj.selector || selector === "**" - && handleObj.selector)) { - handlers.splice(j, 1); - - if (handleObj.selector) { - handlers.delegateCount--; - } - if (special.remove) { - special.remove - .call(elem, handleObj); - } - } - } - - // Remove generic event handler if we removed - // something and no more handlers exist - // (avoids potential for endless recursion - // during removal of special event handlers) - if (origCount && !handlers.length) { - if (!special.teardown - || special.teardown - .call(elem, namespaces, - elemData.handle) === false) { - - jQuery.removeEvent(elem, type, - elemData.handle); - } - - delete events[type]; - } - } - - // Remove the expando if it's no longer used - if (jQuery.isEmptyObject(events)) { - delete elemData.handle; - - // removeData also checks for emptiness and - // clears the expando if empty - // so use it instead of delete - jQuery._removeData(elem, "events"); - } - }, - - trigger : function(event, data, elem, onlyHandlers) { - var handle, ontype, cur, bubbleType, special, tmp, i, eventPath = [ elem - || document ], type = hasOwn.call(event, - "type") ? event.type : event, namespaces = hasOwn - .call(event, "namespace") ? event.namespace - .split(".") : []; - - cur = tmp = elem = elem || document; - - // Don't do events on text and comment nodes - if (elem.nodeType === 3 || elem.nodeType === 8) { - return; - } - - // focus/blur morphs to focusin/out; ensure we're - // not firing them right now - if (rfocusMorph.test(type + jQuery.event.triggered)) { - return; - } - - if (type.indexOf(".") > -1) { - - // Namespaced trigger; create a regexp to match - // event type in handle() - namespaces = type.split("."); - type = namespaces.shift(); - namespaces.sort(); - } - ontype = type.indexOf(":") < 0 && "on" + type; - - // Caller can pass in a jQuery.Event object, Object, - // or just an event type string - event = event[jQuery.expando] ? event - : new jQuery.Event(type, - typeof event === "object" && event); - - // Trigger bitmask: & 1 for native handlers; & 2 for - // jQuery (always true) - event.isTrigger = onlyHandlers ? 2 : 3; - event.namespace = namespaces.join("."); - event.rnamespace = event.namespace ? new RegExp( - "(^|\\.)" - + namespaces.join("\\.(?:.*\\.|)") - + "(\\.|$)") : null; - - // Clean up the event in case it is being reused - event.result = undefined; - if (!event.target) { - event.target = elem; - } - - // Clone any incoming data and prepend the event, - // creating the handler arg list - data = data == null ? [ event ] : jQuery.makeArray( - data, [ event ]); - - // Allow special events to draw outside the lines - special = jQuery.event.special[type] || {}; - if (!onlyHandlers - && special.trigger - && special.trigger.apply(elem, data) === false) { - return; - } - - // Determine event propagation path in advance, per - // W3C events spec (#9951) - // Bubble up to document, then to window; watch for - // a global ownerDocument var (#9724) - if (!onlyHandlers && !special.noBubble - && !jQuery.isWindow(elem)) { - - bubbleType = special.delegateType || type; - if (!rfocusMorph.test(bubbleType + type)) { - cur = cur.parentNode; - } - for (; cur; cur = cur.parentNode) { - eventPath.push(cur); - tmp = cur; - } - - // Only add window if we got to document (e.g., - // not plain obj or detached DOM) - if (tmp === (elem.ownerDocument || document)) { - eventPath.push(tmp.defaultView - || tmp.parentWindow || window); - } - } - - // Fire handlers on the event path - i = 0; - while ((cur = eventPath[i++]) - && !event.isPropagationStopped()) { - - event.type = i > 1 ? bubbleType - : special.bindType || type; - - // jQuery handler - handle = (jQuery._data(cur, "events") || {})[event.type] - && jQuery._data(cur, "handle"); - - if (handle) { - handle.apply(cur, data); - } - - // Native handler - handle = ontype && cur[ontype]; - if (handle && handle.apply && acceptData(cur)) { - event.result = handle.apply(cur, data); - if (event.result === false) { - event.preventDefault(); - } - } - } - event.type = type; - - // If nobody prevented the default action, do it now - if (!onlyHandlers && !event.isDefaultPrevented()) { - - if ((!special._default || special._default - .apply(eventPath.pop(), data) === false) - && acceptData(elem)) { - - // Call a native DOM method on the target - // with the same name name as the event. - // Can't use an .isFunction() check here - // because IE6/7 fails that test. - // Don't do default actions on window, - // that's where global variables be (#6170) - if (ontype && elem[type] - && !jQuery.isWindow(elem)) { - - // Don't re-trigger an onFOO event when - // we call its FOO() method - tmp = elem[ontype]; - - if (tmp) { - elem[ontype] = null; - } - - // Prevent re-triggering of the same - // event, since we already bubbled it - // above - jQuery.event.triggered = type; - try { - elem[type](); - } catch (e) { - - // IE<9 dies on focus/blur to hidden - // element (#1486,#12518) - // only reproducible on winXP IE8 - // native, not IE9 in IE8 mode - } - jQuery.event.triggered = undefined; - - if (tmp) { - elem[ontype] = tmp; - } - } - } - } - - return event.result; - }, - - dispatch : function(event) { - - // Make a writable jQuery.Event from the native - // event object - event = jQuery.event.fix(event); - - var i, j, ret, matched, handleObj, handlerQueue = [], args = slice - .call(arguments), handlers = (jQuery._data( - this, "events") || {})[event.type] - || [], special = jQuery.event.special[event.type] - || {}; - - // Use the fix-ed jQuery.Event rather than the - // (read-only) native event - args[0] = event; - event.delegateTarget = this; - - // Call the preDispatch hook for the mapped type, - // and let it bail if desired - if (special.preDispatch - && special.preDispatch.call(this, event) === false) { - return; - } - - // Determine handlers - handlerQueue = jQuery.event.handlers.call(this, - event, handlers); - - // Run delegates first; they may want to stop - // propagation beneath us - i = 0; - while ((matched = handlerQueue[i++]) - && !event.isPropagationStopped()) { - event.currentTarget = matched.elem; - - j = 0; - while ((handleObj = matched.handlers[j++]) - && !event - .isImmediatePropagationStopped()) { - - // Triggered event must either 1) have no - // namespace, or 2) have namespace(s) - // a subset or equal to those in the bound - // event (both can have no namespace). - if (!event.rnamespace - || event.rnamespace - .test(handleObj.namespace)) { - - event.handleObj = handleObj; - event.data = handleObj.data; - - ret = ((jQuery.event.special[handleObj.origType] || {}).handle || handleObj.handler) - .apply(matched.elem, args); - - if (ret !== undefined) { - if ((event.result = ret) === false) { - event.preventDefault(); - event.stopPropagation(); - } - } - } - } - } - - // Call the postDispatch hook for the mapped type - if (special.postDispatch) { - special.postDispatch.call(this, event); - } - - return event.result; - }, - - handlers : function(event, handlers) { - var i, matches, sel, handleObj, handlerQueue = [], delegateCount = handlers.delegateCount, cur = event.target; - - // Support (at least): Chrome, IE9 - // Find delegate handlers - // Black-hole SVG instance trees (#13180) - // - // Support: Firefox<=42+ - // Avoid non-left-click in FF but don't block IE - // radio events (#3861, gh-2343) - if (delegateCount - && cur.nodeType - && (event.type !== "click" - || isNaN(event.button) || event.button < 1)) { - - /* jshint eqeqeq: false */ - for (; cur != this; cur = cur.parentNode - || this) { - /* jshint eqeqeq: true */ - - // Don't check non-elements (#13208) - // Don't process clicks on disabled elements - // (#6911, #8165, #11382, #11764) - if (cur.nodeType === 1 - && (cur.disabled !== true || event.type !== "click")) { - matches = []; - for (i = 0; i < delegateCount; i++) { - handleObj = handlers[i]; - - // Don't conflict with - // Object.prototype properties - // (#13203) - sel = handleObj.selector + " "; - - if (matches[sel] === undefined) { - matches[sel] = handleObj.needsContext ? jQuery( - sel, this).index(cur) > -1 - : jQuery.find(sel, - this, null, - [ cur ]).length; - } - if (matches[sel]) { - matches.push(handleObj); - } - } - if (matches.length) { - handlerQueue.push({ - elem : cur, - handlers : matches - }); - } - } - } - } - - // Add the remaining (directly-bound) handlers - if (delegateCount < handlers.length) { - handlerQueue.push({ - elem : this, - handlers : handlers.slice(delegateCount) - }); - } - - return handlerQueue; - }, - - fix : function(event) { - if (event[jQuery.expando]) { - return event; - } - - // Create a writable copy of the event object and - // normalize some properties - var i, prop, copy, type = event.type, originalEvent = event, fixHook = this.fixHooks[type]; - - if (!fixHook) { - this.fixHooks[type] = fixHook = rmouseEvent - .test(type) ? this.mouseHooks - : rkeyEvent.test(type) ? this.keyHooks - : {}; - } - copy = fixHook.props ? this.props - .concat(fixHook.props) : this.props; - - event = new jQuery.Event(originalEvent); - - i = copy.length; - while (i--) { - prop = copy[i]; - event[prop] = originalEvent[prop]; - } - - // Support: IE<9 - // Fix target property (#1925) - if (!event.target) { - event.target = originalEvent.srcElement - || document; - } - - // Support: Safari 6-8+ - // Target should not be a text node (#504, #13143) - if (event.target.nodeType === 3) { - event.target = event.target.parentNode; - } - - // Support: IE<9 - // For mouse/key events, metaKey==false if it's - // undefined (#3368, #11328) - event.metaKey = !!event.metaKey; - - return fixHook.filter ? fixHook.filter(event, - originalEvent) : event; - }, - - // Includes some event props shared by KeyEvent and - // MouseEvent - props : ("altKey bubbles cancelable ctrlKey currentTarget detail eventPhase " - + "metaKey relatedTarget shiftKey target timeStamp view which") - .split(" "), - - fixHooks : {}, - - keyHooks : { - props : "char charCode key keyCode".split(" "), - filter : function(event, original) { - - // Add which for key events - if (event.which == null) { - event.which = original.charCode != null ? original.charCode - : original.keyCode; - } - - return event; - } - }, - - mouseHooks : { - props : ("button buttons clientX clientY fromElement offsetX offsetY " - + "pageX pageY screenX screenY toElement") - .split(" "), - filter : function(event, original) { - var body, eventDoc, doc, button = original.button, fromElement = original.fromElement; - - // Calculate pageX/Y if missing and clientX/Y - // available - if (event.pageX == null - && original.clientX != null) { - eventDoc = event.target.ownerDocument - || document; - doc = eventDoc.documentElement; - body = eventDoc.body; - - event.pageX = original.clientX - + (doc && doc.scrollLeft || body - && body.scrollLeft || 0) - - (doc && doc.clientLeft || body - && body.clientLeft || 0); - event.pageY = original.clientY - + (doc && doc.scrollTop || body - && body.scrollTop || 0) - - (doc && doc.clientTop || body - && body.clientTop || 0); - } - - // Add relatedTarget, if necessary - if (!event.relatedTarget && fromElement) { - event.relatedTarget = fromElement === event.target ? original.toElement - : fromElement; - } - - // Add which for click: 1 === left; 2 === - // middle; 3 === right - // Note: button is not normalized, so don't use - // it - if (!event.which && button !== undefined) { - event.which = (button & 1 ? 1 - : (button & 2 ? 3 : (button & 4 ? 2 - : 0))); - } - - return event; - } - }, - - special : { - load : { - - // Prevent triggered image.load events from - // bubbling to window.load - noBubble : true - }, - focus : { - - // Fire native event if possible so blur/focus - // sequence is correct - trigger : function() { - if (this !== safeActiveElement() - && this.focus) { - try { - this.focus(); - return false; - } catch (e) { - - // Support: IE<9 - // If we error on focus to hidden - // element (#1486, #12518), - // let .trigger() run the handlers - } - } - }, - delegateType : "focusin" - }, - blur : { - trigger : function() { - if (this === safeActiveElement() - && this.blur) { - this.blur(); - return false; - } - }, - delegateType : "focusout" - }, - click : { - - // For checkbox, fire native event so checked - // state will be right - trigger : function() { - if (jQuery.nodeName(this, "input") - && this.type === "checkbox" - && this.click) { - this.click(); - return false; - } - }, - - // For cross-browser consistency, don't fire - // native .click() on links - _default : function(event) { - return jQuery.nodeName(event.target, "a"); - } - }, - - beforeunload : { - postDispatch : function(event) { - - // Support: Firefox 20+ - // Firefox doesn't alert if the returnValue - // field is not set. - if (event.result !== undefined - && event.originalEvent) { - event.originalEvent.returnValue = event.result; - } - } - } - }, - - // Piggyback on a donor event to simulate a different - // one - simulate : function(type, elem, event) { - var e = jQuery.extend(new jQuery.Event(), event, { - type : type, - isSimulated : true - - // Previously, `originalEvent: {}` was set here, so - // stopPropagation call - // would not be triggered on donor event, since in - // our own - // jQuery.event.stopPropagation function we had a - // check for existence of - // originalEvent.stopPropagation method, so, - // consequently it would be a noop. - // - // Guard for simulated events was moved to - // jQuery.event.stopPropagation function - // since `originalEvent` should point to the - // original event for the - // constancy with other events and for more focused - // logic - }); - - jQuery.event.trigger(e, null, elem); - - if (e.isDefaultPrevented()) { - event.preventDefault(); - } - } - }; - - jQuery.removeEvent = document.removeEventListener ? function( - elem, type, handle) { - - // This "if" is needed for plain objects - if (elem.removeEventListener) { - elem.removeEventListener(type, handle); - } - } - : function(elem, type, handle) { - var name = "on" + type; - - if (elem.detachEvent) { - - // #8545, #7054, preventing memory leaks for - // custom events in IE6-8 - // detachEvent needed property on element, - // by name of that event, - // to properly expose it to GC - if (typeof elem[name] === "undefined") { - elem[name] = null; - } - - elem.detachEvent(name, handle); - } - }; - - jQuery.Event = function(src, props) { - - // Allow instantiation without the 'new' keyword - if (!(this instanceof jQuery.Event)) { - return new jQuery.Event(src, props); - } - - // Event object - if (src && src.type) { - this.originalEvent = src; - this.type = src.type; - - // Events bubbling up the document may have been - // marked as prevented - // by a handler lower down the tree; reflect the - // correct value. - this.isDefaultPrevented = src.defaultPrevented - || src.defaultPrevented === undefined && - - // Support: IE < 9, Android < 4.0 - src.returnValue === false ? returnTrue - : returnFalse; - - // Event type - } else { - this.type = src; - } - - // Put explicitly provided properties onto the event - // object - if (props) { - jQuery.extend(this, props); - } - - // Create a timestamp if incoming event doesn't have one - this.timeStamp = src && src.timeStamp || jQuery.now(); - - // Mark it as fixed - this[jQuery.expando] = true; - }; - - // jQuery.Event is based on DOM3 Events as specified by the - // ECMAScript Language Binding - // http://www.w3.org/TR/2003/WD-DOM-Level-3-Events-20030331/ecma-script-binding.html - jQuery.Event.prototype = { - constructor : jQuery.Event, - isDefaultPrevented : returnFalse, - isPropagationStopped : returnFalse, - isImmediatePropagationStopped : returnFalse, - - preventDefault : function() { - var e = this.originalEvent; - - this.isDefaultPrevented = returnTrue; - if (!e) { - return; - } - - // If preventDefault exists, run it on the original - // event - if (e.preventDefault) { - e.preventDefault(); - - // Support: IE - // Otherwise set the returnValue property of the - // original event to false - } else { - e.returnValue = false; - } - }, - stopPropagation : function() { - var e = this.originalEvent; - - this.isPropagationStopped = returnTrue; - - if (!e || this.isSimulated) { - return; - } - - // If stopPropagation exists, run it on the original - // event - if (e.stopPropagation) { - e.stopPropagation(); - } - - // Support: IE - // Set the cancelBubble property of the original - // event to true - e.cancelBubble = true; - }, - stopImmediatePropagation : function() { - var e = this.originalEvent; - - this.isImmediatePropagationStopped = returnTrue; - - if (e && e.stopImmediatePropagation) { - e.stopImmediatePropagation(); - } - - this.stopPropagation(); - } - }; - - // Create mouseenter/leave events using mouseover/out and - // event-time checks - // so that event delegation works in jQuery. - // Do the same for pointerenter/pointerleave and - // pointerover/pointerout - // - // Support: Safari 7 only - // Safari sends mouseenter too often; see: - // https://code.google.com/p/chromium/issues/detail?id=470258 - // for the description of the bug (it existed in older - // Chrome versions as well). - jQuery - .each( - { - mouseenter : "mouseover", - mouseleave : "mouseout", - pointerenter : "pointerover", - pointerleave : "pointerout" - }, - function(orig, fix) { - jQuery.event.special[orig] = { - delegateType : fix, - bindType : fix, - - handle : function(event) { - var ret, target = this, related = event.relatedTarget, handleObj = event.handleObj; - - // For mouseenter/leave call the - // handler if related is outside - // the target. - // NB: No relatedTarget if the - // mouse left/entered the - // browser window - if (!related - || (related !== target && !jQuery - .contains( - target, - related))) { - event.type = handleObj.origType; - ret = handleObj.handler - .apply(this, - arguments); - event.type = fix; - } - return ret; - } - }; - }); - - // IE submit delegation - if (!support.submit) { - - jQuery.event.special.submit = { - setup : function() { - - // Only need this for delegated form submit - // events - if (jQuery.nodeName(this, "form")) { - return false; - } - - // Lazy-add a submit handler when a descendant - // form may potentially be submitted - jQuery.event - .add( - this, - "click._submit keypress._submit", - function(e) { - - // Node name check avoids a - // VML-related crash in IE - // (#9807) - var elem = e.target, form = jQuery - .nodeName(elem, - "input") - || jQuery.nodeName( - elem, - "button") ? - - // Support: IE <=8 - // We use jQuery.prop - // instead of elem.form - // to allow fixing the IE8 - // delegated submit issue - // (gh-2332) - // by 3rd party - // polyfills/workarounds. - jQuery.prop(elem, "form") - : undefined; - - if (form - && !jQuery._data( - form, - "submit")) { - jQuery.event - .add( - form, - "submit._submit", - function( - event) { - event._submitBubble = true; - }); - jQuery._data(form, - "submit", true); - } - }); - - // return undefined since we don't need an event - // listener - }, - - postDispatch : function(event) { - - // If form was submitted by the user, bubble the - // event up the tree - if (event._submitBubble) { - delete event._submitBubble; - if (this.parentNode && !event.isTrigger) { - jQuery.event.simulate("submit", - this.parentNode, event); - } - } - }, - - teardown : function() { - - // Only need this for delegated form submit - // events - if (jQuery.nodeName(this, "form")) { - return false; - } - - // Remove delegated handlers; cleanData - // eventually reaps submit handlers attached - // above - jQuery.event.remove(this, "._submit"); - } - }; - } - - // IE change delegation and checkbox/radio fix - if (!support.change) { - - jQuery.event.special.change = { - - setup : function() { - - if (rformElems.test(this.nodeName)) { - - // IE doesn't fire change on a check/radio - // until blur; trigger it on click - // after a propertychange. Eat the - // blur-change in special.change.handle. - // This still fires onchange a second time - // for check/radio after blur. - if (this.type === "checkbox" - || this.type === "radio") { - jQuery.event - .add( - this, - "propertychange._change", - function(event) { - if (event.originalEvent.propertyName === "checked") { - this._justChanged = true; - } - }); - jQuery.event - .add( - this, - "click._change", - function(event) { - if (this._justChanged - && !event.isTrigger) { - this._justChanged = false; - } - - // Allow triggered, - // simulated change - // events (#11500) - jQuery.event - .simulate( - "change", - this, - event); - }); - } - return false; - } - - // Delegated event; lazy-add a change handler on - // descendant inputs - jQuery.event - .add( - this, - "beforeactivate._change", - function(e) { - var elem = e.target; - - if (rformElems - .test(elem.nodeName) - && !jQuery._data( - elem, - "change")) { - jQuery.event - .add( - elem, - "change._change", - function( - event) { - if (this.parentNode - && !event.isSimulated - && !event.isTrigger) { - jQuery.event - .simulate( - "change", - this.parentNode, - event); - } - }); - jQuery._data(elem, - "change", true); - } - }); - }, - - handle : function(event) { - var elem = event.target; - - // Swallow native change events from - // checkbox/radio, we already triggered them - // above - if (this !== elem - || event.isSimulated - || event.isTrigger - || (elem.type !== "radio" && elem.type !== "checkbox")) { - - return event.handleObj.handler.apply(this, - arguments); - } - }, - - teardown : function() { - jQuery.event.remove(this, "._change"); - - return !rformElems.test(this.nodeName); - } - }; - } - - // Support: Firefox - // Firefox doesn't have focus(in | out) events - // Related ticket - - // https://bugzilla.mozilla.org/show_bug.cgi?id=687787 - // - // Support: Chrome, Safari - // focus(in | out) events fire after focus & blur events, - // which is spec violation - - // http://www.w3.org/TR/DOM-Level-3-Events/#events-focusevent-event-order - // Related ticket - - // https://code.google.com/p/chromium/issues/detail?id=449857 - if (!support.focusin) { - jQuery.each({ - focus : "focusin", - blur : "focusout" - }, - function(orig, fix) { - - // Attach a single capturing handler on the - // document while someone wants - // focusin/focusout - var handler = function(event) { - jQuery.event.simulate(fix, - event.target, jQuery.event - .fix(event)); - }; - - jQuery.event.special[fix] = { - setup : function() { - var doc = this.ownerDocument - || this, attaches = jQuery - ._data(doc, fix); - - if (!attaches) { - doc.addEventListener(orig, - handler, true); - } - jQuery._data(doc, fix, - (attaches || 0) + 1); - }, - teardown : function() { - var doc = this.ownerDocument - || this, attaches = jQuery - ._data(doc, fix) - 1; - - if (!attaches) { - doc.removeEventListener(orig, - handler, true); - jQuery._removeData(doc, fix); - } else { - jQuery - ._data(doc, fix, - attaches); - } - } - }; - }); - } - - jQuery.fn - .extend({ - - on : function(types, selector, data, fn) { - return on(this, types, selector, data, fn); - }, - one : function(types, selector, data, fn) { - return on(this, types, selector, data, fn, - 1); - }, - off : function(types, selector, fn) { - var handleObj, type; - if (types && types.preventDefault - && types.handleObj) { - - // ( event ) dispatched jQuery.Event - handleObj = types.handleObj; - jQuery(types.delegateTarget) - .off( - handleObj.namespace ? handleObj.origType - + "." - + handleObj.namespace - : handleObj.origType, - handleObj.selector, - handleObj.handler); - return this; - } - if (typeof types === "object") { - - // ( types-object [, selector] ) - for (type in types) { - this.off(type, selector, - types[type]); - } - return this; - } - if (selector === false - || typeof selector === "function") { - - // ( types [, fn] ) - fn = selector; - selector = undefined; - } - if (fn === false) { - fn = returnFalse; - } - return this.each(function() { - jQuery.event.remove(this, types, fn, - selector); - }); - }, - - trigger : function(type, data) { - return this.each(function() { - jQuery.event.trigger(type, data, this); - }); - }, - triggerHandler : function(type, data) { - var elem = this[0]; - if (elem) { - return jQuery.event.trigger(type, data, - elem, true); - } - } - }); - - var rinlinejQuery = / jQuery\d+="(?:null|\d+)"/g, rnoshimcache = new RegExp( - "<(?:" + nodeNames + ")[\\s/>]", "i"), rxhtmlTag = /<(?!area|br|col|embed|hr|img|input|link|meta|param)(([\w:-]+)[^>]*)\/>/gi, - - // Support: IE 10-11, Edge 10240+ - // In IE/Edge using regex groups here causes severe - // slowdowns. - // See - // https://connect.microsoft.com/IE/feedback/details/1736512/ - rnoInnerhtml = /\s*$/g, safeFragment = createSafeFragment(document), fragmentDiv = safeFragment - .appendChild(document.createElement("div")); - - // Support: IE<8 - // Manipulating tables requires a tbody - function manipulationTarget(elem, content) { - return jQuery.nodeName(elem, "table") - && jQuery.nodeName( - content.nodeType !== 11 ? content - : content.firstChild, "tr") ? - - elem.getElementsByTagName("tbody")[0] - || elem.appendChild(elem.ownerDocument - .createElement("tbody")) : elem; - } - - // Replace/restore the type attribute of script elements for - // safe DOM manipulation - function disableScript(elem) { - elem.type = (jQuery.find.attr(elem, "type") !== null) - + "/" + elem.type; - return elem; - } - function restoreScript(elem) { - var match = rscriptTypeMasked.exec(elem.type); - if (match) { - elem.type = match[1]; - } else { - elem.removeAttribute("type"); - } - return elem; - } - - function cloneCopyEvent(src, dest) { - if (dest.nodeType !== 1 || !jQuery.hasData(src)) { - return; - } - - var type, i, l, oldData = jQuery._data(src), curData = jQuery - ._data(dest, oldData), events = oldData.events; - - if (events) { - delete curData.handle; - curData.events = {}; - - for (type in events) { - for (i = 0, l = events[type].length; i < l; i++) { - jQuery.event.add(dest, type, - events[type][i]); - } - } - } - - // make the cloned public data object a copy from the - // original - if (curData.data) { - curData.data = jQuery.extend({}, curData.data); - } - } - - function fixCloneNodeIssues(src, dest) { - var nodeName, e, data; - - // We do not need to do anything for non-Elements - if (dest.nodeType !== 1) { - return; - } - - nodeName = dest.nodeName.toLowerCase(); - - // IE6-8 copies events bound via attachEvent when using - // cloneNode. - if (!support.noCloneEvent && dest[jQuery.expando]) { - data = jQuery._data(dest); - - for (e in data.events) { - jQuery.removeEvent(dest, e, data.handle); - } - - // Event data gets referenced instead of copied if - // the expando gets copied too - dest.removeAttribute(jQuery.expando); - } - - // IE blanks contents when cloning scripts, and tries to - // evaluate newly-set text - if (nodeName === "script" && dest.text !== src.text) { - disableScript(dest).text = src.text; - restoreScript(dest); - - // IE6-10 improperly clones children of object - // elements using classid. - // IE10 throws NoModificationAllowedError if parent - // is null, #12132. - } else if (nodeName === "object") { - if (dest.parentNode) { - dest.outerHTML = src.outerHTML; - } - - // This path appears unavoidable for IE9. When - // cloning an object - // element in IE9, the outerHTML strategy above is - // not sufficient. - // If the src has innerHTML and the destination does - // not, - // copy the src.innerHTML into the dest.innerHTML. - // #10324 - if (support.html5Clone - && (src.innerHTML && !jQuery - .trim(dest.innerHTML))) { - dest.innerHTML = src.innerHTML; - } - - } else if (nodeName === "input" - && rcheckableType.test(src.type)) { - - // IE6-8 fails to persist the checked state of a - // cloned checkbox - // or radio button. Worse, IE6-7 fail to give the - // cloned element - // a checked appearance if the defaultChecked value - // isn't also set - - dest.defaultChecked = dest.checked = src.checked; - - // IE6-7 get confused and end up setting the value - // of a cloned - // checkbox/radio button to an empty string instead - // of "on" - if (dest.value !== src.value) { - dest.value = src.value; - } - - // IE6-8 fails to return the selected option to the - // default selected - // state when cloning options - } else if (nodeName === "option") { - dest.defaultSelected = dest.selected = src.defaultSelected; - - // IE6-8 fails to set the defaultValue to the - // correct value when - // cloning other types of input fields - } else if (nodeName === "input" - || nodeName === "textarea") { - dest.defaultValue = src.defaultValue; - } - } - - function domManip(collection, args, callback, ignored) { - - // Flatten any nested arrays - args = concat.apply([], args); - - var first, node, hasScripts, scripts, doc, fragment, i = 0, l = collection.length, iNoClone = l - 1, value = args[0], isFunction = jQuery - .isFunction(value); - - // We can't cloneNode fragments that contain checked, in - // WebKit - if (isFunction - || (l > 1 && typeof value === "string" - && !support.checkClone && rchecked - .test(value))) { - return collection.each(function(index) { - var self = collection.eq(index); - if (isFunction) { - args[0] = value.call(this, index, self - .html()); - } - domManip(self, args, callback, ignored); - }); - } - - if (l) { - fragment = buildFragment(args, - collection[0].ownerDocument, false, - collection, ignored); - first = fragment.firstChild; - - if (fragment.childNodes.length === 1) { - fragment = first; - } - - // Require either new content or an interest in - // ignored elements to invoke the callback - if (first || ignored) { - scripts = jQuery.map( - getAll(fragment, "script"), - disableScript); - hasScripts = scripts.length; - - // Use the original fragment for the last item - // instead of the first because it can end up - // being emptied incorrectly in certain - // situations (#8070). - for (; i < l; i++) { - node = fragment; - - if (i !== iNoClone) { - node = jQuery.clone(node, true, true); - - // Keep references to cloned scripts for - // later restoration - if (hasScripts) { - - // Support: Android<4.1, PhantomJS<2 - // push.apply(_, arraylike) throws - // on ancient WebKit - jQuery.merge(scripts, getAll(node, - "script")); - } - } - - callback.call(collection[i], node, i); - } - - if (hasScripts) { - doc = scripts[scripts.length - 1].ownerDocument; - - // Reenable scripts - jQuery.map(scripts, restoreScript); - - // Evaluate executable scripts on first - // document insertion - for (i = 0; i < hasScripts; i++) { - node = scripts[i]; - if (rscriptType.test(node.type || "") - && !jQuery._data(node, - "globalEval") - && jQuery.contains(doc, node)) { - - if (node.src) { - - // Optional AJAX dependency, but - // won't run scripts if not - // present - if (jQuery._evalUrl) { - jQuery._evalUrl(node.src); - } - } else { - jQuery - .globalEval((node.text - || node.textContent - || node.innerHTML || "") - .replace( - rcleanScript, - "")); - } - } - } - } - - // Fix #11809: Avoid leaking memory - fragment = first = null; - } - } - - return collection; - } - - function remove(elem, selector, keepData) { - var node, elems = selector ? jQuery.filter(selector, - elem) : elem, i = 0; - - for (; (node = elems[i]) != null; i++) { - - if (!keepData && node.nodeType === 1) { - jQuery.cleanData(getAll(node)); - } - - if (node.parentNode) { - if (keepData - && jQuery.contains(node.ownerDocument, - node)) { - setGlobalEval(getAll(node, "script")); - } - node.parentNode.removeChild(node); - } - } - - return elem; - } - - jQuery - .extend({ - htmlPrefilter : function(html) { - return html.replace(rxhtmlTag, "<$1>"); - }, - - clone : function(elem, dataAndEvents, - deepDataAndEvents) { - var destElements, node, clone, i, srcElements, inPage = jQuery - .contains(elem.ownerDocument, elem); - - if (support.html5Clone - || jQuery.isXMLDoc(elem) - || !rnoshimcache.test("<" - + elem.nodeName + ">")) { - - clone = elem.cloneNode(true); - - // IE<=8 does not properly clone - // detached, unknown element nodes - } else { - fragmentDiv.innerHTML = elem.outerHTML; - fragmentDiv - .removeChild(clone = fragmentDiv.firstChild); - } - - if ((!support.noCloneEvent || !support.noCloneChecked) - && (elem.nodeType === 1 || elem.nodeType === 11) - && !jQuery.isXMLDoc(elem)) { - - // We eschew Sizzle here for performance - // reasons: - // http://jsperf.com/getall-vs-sizzle/2 - destElements = getAll(clone); - srcElements = getAll(elem); - - // Fix all IE cloning issues - for (i = 0; (node = srcElements[i]) != null; ++i) { - - // Ensure that the destination node - // is not null; Fixes #9587 - if (destElements[i]) { - fixCloneNodeIssues(node, - destElements[i]); - } - } - } - - // Copy the events from the original to the - // clone - if (dataAndEvents) { - if (deepDataAndEvents) { - srcElements = srcElements - || getAll(elem); - destElements = destElements - || getAll(clone); - - for (i = 0; (node = srcElements[i]) != null; i++) { - cloneCopyEvent(node, - destElements[i]); - } - } else { - cloneCopyEvent(elem, clone); - } - } - - // Preserve script evaluation history - destElements = getAll(clone, "script"); - if (destElements.length > 0) { - setGlobalEval(destElements, !inPage - && getAll(elem, "script")); - } - - destElements = srcElements = node = null; - - // Return the cloned set - return clone; - }, - - cleanData : function(elems, /* internal */ - forceAcceptData) { - var elem, type, id, data, i = 0, internalKey = jQuery.expando, cache = jQuery.cache, attributes = support.attributes, special = jQuery.event.special; - - for (; (elem = elems[i]) != null; i++) { - if (forceAcceptData || acceptData(elem)) { - - id = elem[internalKey]; - data = id && cache[id]; - - if (data) { - if (data.events) { - for (type in data.events) { - if (special[type]) { - jQuery.event - .remove( - elem, - type); - - // This is a - // shortcut to avoid - // jQuery.event.remove's - // overhead - } else { - jQuery - .removeEvent( - elem, - type, - data.handle); - } - } - } - - // Remove cache only if it was - // not already removed by - // jQuery.event.remove - if (cache[id]) { - - delete cache[id]; - - // Support: IE<9 - // IE does not allow us to - // delete expando properties - // from nodes - // IE creates expando - // attributes along with the - // property - // IE does not have a - // removeAttribute function - // on Document nodes - if (!attributes - && typeof elem.removeAttribute !== "undefined") { - elem - .removeAttribute(internalKey); - - // Webkit & Blink - // performance suffers - // when deleting - // properties - // from DOM nodes, so - // set to undefined - // instead - // https://code.google.com/p/chromium/issues/detail?id=378607 - } else { - elem[internalKey] = undefined; - } - - deletedIds.push(id); - } - } - } - } - } - }); - - jQuery.fn - .extend({ - - // Keep domManip exposed until 3.0 (gh-2225) - domManip : domManip, - - detach : function(selector) { - return remove(this, selector, true); - }, - - remove : function(selector) { - return remove(this, selector); - }, - - text : function(value) { - return access( - this, - function(value) { - return value === undefined ? jQuery - .text(this) - : this - .empty() - .append( - (this[0] - && this[0].ownerDocument || document) - .createTextNode(value)); - }, null, value, arguments.length); - }, - - append : function() { - return domManip(this, arguments, function( - elem) { - if (this.nodeType === 1 - || this.nodeType === 11 - || this.nodeType === 9) { - var target = manipulationTarget( - this, elem); - target.appendChild(elem); - } - }); - }, - - prepend : function() { - return domManip(this, arguments, function( - elem) { - if (this.nodeType === 1 - || this.nodeType === 11 - || this.nodeType === 9) { - var target = manipulationTarget( - this, elem); - target.insertBefore(elem, - target.firstChild); - } - }); - }, - - before : function() { - return domManip(this, arguments, function( - elem) { - if (this.parentNode) { - this.parentNode.insertBefore(elem, - this); - } - }); - }, - - after : function() { - return domManip(this, arguments, function( - elem) { - if (this.parentNode) { - this.parentNode.insertBefore(elem, - this.nextSibling); - } - }); - }, - - empty : function() { - var elem, i = 0; - - for (; (elem = this[i]) != null; i++) { - - // Remove element nodes and prevent - // memory leaks - if (elem.nodeType === 1) { - jQuery - .cleanData(getAll(elem, - false)); - } - - // Remove any remaining nodes - while (elem.firstChild) { - elem.removeChild(elem.firstChild); - } - - // If this is a select, ensure that it - // displays empty (#12336) - // Support: IE<9 - if (elem.options - && jQuery.nodeName(elem, - "select")) { - elem.options.length = 0; - } - } - - return this; - }, - - clone : function(dataAndEvents, - deepDataAndEvents) { - dataAndEvents = dataAndEvents == null ? false - : dataAndEvents; - deepDataAndEvents = deepDataAndEvents == null ? dataAndEvents - : deepDataAndEvents; - - return this.map(function() { - return jQuery.clone(this, - dataAndEvents, - deepDataAndEvents); - }); - }, - - html : function(value) { - return access( - this, - function(value) { - var elem = this[0] || {}, i = 0, l = this.length; - - if (value === undefined) { - return elem.nodeType === 1 ? elem.innerHTML - .replace( - rinlinejQuery, - "") - : undefined; - } - - // See if we can take a shortcut - // and just use innerHTML - if (typeof value === "string" - && !rnoInnerhtml - .test(value) - && (support.htmlSerialize || !rnoshimcache - .test(value)) - && (support.leadingWhitespace || !rleadingWhitespace - .test(value)) - && !wrapMap[(rtagName - .exec(value) || [ - "", "" ])[1] - .toLowerCase()]) { - - value = jQuery - .htmlPrefilter(value); - - try { - for (; i < l; i++) { - - // Remove element - // nodes and prevent - // memory leaks - elem = this[i] - || {}; - if (elem.nodeType === 1) { - jQuery - .cleanData(getAll( - elem, - false)); - elem.innerHTML = value; - } - } - - elem = 0; - - // If using innerHTML - // throws an exception, - // use the fallback - // method - } catch (e) { - } - } - - if (elem) { - this.empty().append(value); - } - }, null, value, arguments.length); - }, - - replaceWith : function() { - var ignored = []; - - // Make the changes, replacing each - // non-ignored context element with the new - // content - return domManip( - this, - arguments, - function(elem) { - var parent = this.parentNode; - - if (jQuery.inArray(this, - ignored) < 0) { - jQuery - .cleanData(getAll(this)); - if (parent) { - parent.replaceChild( - elem, this); - } - } - - // Force callback invocation - }, ignored); - } - }); - - jQuery - .each( - { - appendTo : "append", - prependTo : "prepend", - insertBefore : "before", - insertAfter : "after", - replaceAll : "replaceWith" - }, - function(name, original) { - jQuery.fn[name] = function(selector) { - var elems, i = 0, ret = [], insert = jQuery(selector), last = insert.length - 1; - - for (; i <= last; i++) { - elems = i === last ? this - : this.clone(true); - jQuery(insert[i])[original] - (elems); - - // Modern browsers can apply - // jQuery collections as arrays, - // but oldIE needs a .get() - push.apply(ret, elems.get()); - } - - return this.pushStack(ret); - }; - }); - - var iframe, elemdisplay = { - - // Support: Firefox - // We have to pre-define these values for FF (#10227) - HTML : "block", - BODY : "block" - }; - - /** - * Retrieve the actual display of a element - * - * @param {String} - * name nodeName of the element - * @param {Object} - * doc Document object - */ - - // Called only from within defaultDisplay - function actualDisplay(name, doc) { - var elem = jQuery(doc.createElement(name)).appendTo( - doc.body), - - display = jQuery.css(elem[0], "display"); - - // We don't have any data stored on the element, - // so use "detach" method as fast way to get rid of the - // element - elem.detach(); - - return display; - } - - /** - * Try to determine the default display value of an element - * - * @param {String} - * nodeName - */ - function defaultDisplay(nodeName) { - var doc = document, display = elemdisplay[nodeName]; - - if (!display) { - display = actualDisplay(nodeName, doc); - - // If the simple way fails, read from inside an - // iframe - if (display === "none" || !display) { - - // Use the already-created iframe if possible - iframe = (iframe || jQuery("