From 430153e1a9489a86cf0ff7942eceb0bf5f1c170c Mon Sep 17 00:00:00 2001 From: vrvarma Date: Fri, 13 Dec 2019 10:24:55 -0500 Subject: osdf rearchitecture into apps and libs Change-Id: I2db2f8e252bd5e60807b2ffabf5a5b193a789f7a Signed-off-by: vrvarma Issue-ID: OPTFRA-637 --- apps/pci/optimizers/__init__.py | 0 apps/pci/optimizers/configdb.py | 69 ++++++++++ apps/pci/optimizers/pci_opt_processor.py | 123 ++++++++++++++++++ apps/pci/optimizers/solver/__init__.py | 0 apps/pci/optimizers/solver/min_confusion.mzn | 98 +++++++++++++++ apps/pci/optimizers/solver/min_confusion_inl.mzn | 140 +++++++++++++++++++++ .../solver/no_conflicts_no_confusion.mzn | 86 +++++++++++++ apps/pci/optimizers/solver/optimizer.py | 137 ++++++++++++++++++++ apps/pci/optimizers/solver/pci_utils.py | 40 ++++++ 9 files changed, 693 insertions(+) create mode 100644 apps/pci/optimizers/__init__.py create mode 100644 apps/pci/optimizers/configdb.py create mode 100644 apps/pci/optimizers/pci_opt_processor.py create mode 100644 apps/pci/optimizers/solver/__init__.py create mode 100644 apps/pci/optimizers/solver/min_confusion.mzn create mode 100644 apps/pci/optimizers/solver/min_confusion_inl.mzn create mode 100644 apps/pci/optimizers/solver/no_conflicts_no_confusion.mzn create mode 100644 apps/pci/optimizers/solver/optimizer.py create mode 100644 apps/pci/optimizers/solver/pci_utils.py (limited to 'apps/pci/optimizers') diff --git a/apps/pci/optimizers/__init__.py b/apps/pci/optimizers/__init__.py new file mode 100644 index 0000000..e69de29 diff --git a/apps/pci/optimizers/configdb.py b/apps/pci/optimizers/configdb.py new file mode 100644 index 0000000..8f003c2 --- /dev/null +++ b/apps/pci/optimizers/configdb.py @@ -0,0 +1,69 @@ +# ------------------------------------------------------------------------- +# Copyright (c) 2018 AT&T Intellectual Property +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +# +# ------------------------------------------------------------------------- +# + +from datetime import datetime as dt + +from osdf.logging.osdf_logging import debug_log +from osdf.utils.interfaces import RestClient + + +def request(req_object, osdf_config, flat_policies): + """ + Process a configdb request from a Client (build Conductor API call, make the call, return result) + :param req_object: Request parameters from the client + :param osdf_config: Configuration specific to OSDF application (core + deployment) + :param flat_policies: policies related to PCI Opt (fetched based on request) + :return: response from ConfigDB (accounting for redirects from Conductor service + """ + cell_list_response = {} + config = osdf_config.deployment + local_config = osdf_config.core + uid, passwd = config['configDbUserName'], config['configDbPassword'] + req_id = req_object['requestInfo']['requestId'] + transaction_id = req_object['requestInfo']['transactionId'] + headers = dict(transaction_id=transaction_id) + + network_id = req_object['cellInfo']['networkId'] + + cell_list_response['network_id'] = network_id + + ts = dt.strftime(dt.now(), '%Y-%m-%d %H:%M:%S%z') + + rc = RestClient(userid=uid, passwd=passwd, method="GET", log_func=debug_log.debug, headers=headers) + + cell_list_url = '{}/{}/{}/{}'.format(config['configDbUrl'], config['configDbGetCellListUrl'], network_id, ts) + + cell_list_resp = rc.request(raw_response=True, url=cell_list_url) + cell_resp = cell_list_resp.json() + + cell_list = [] + count = 0 + for cell_id in cell_resp: + cell_info = {'cell_id': cell_id, 'id': count} + nbr_list_url = '{}/{}/{}/{}'.format(config['configDbUrl'], config['configDbGetNbrListUrl'], cell_id, ts) + nbr_list_raw = rc.request(url=nbr_list_url, raw_response=True) + cell_info['nbr_list'] = get_neighbor_list(nbr_list_raw.json()) + cell_list.append(cell_info) + count += 1 + + cell_list_response['cell_list'] = cell_list + return cell_resp, cell_list_response + + +def get_neighbor_list(nbr_list_response): + return nbr_list_response.get('nbrList', []) diff --git a/apps/pci/optimizers/pci_opt_processor.py b/apps/pci/optimizers/pci_opt_processor.py new file mode 100644 index 0000000..9948d55 --- /dev/null +++ b/apps/pci/optimizers/pci_opt_processor.py @@ -0,0 +1,123 @@ +# ------------------------------------------------------------------------- +# Copyright (c) 2018 AT&T Intellectual Property +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +# +# ------------------------------------------------------------------------- +# + +import traceback + +from onaplogging.mdcContext import MDC +from requests import RequestException + +from osdf.logging.osdf_logging import metrics_log, MH, error_log +from osdf.operation.error_handling import build_json_error_body +from osdf.utils.interfaces import get_rest_client +from .configdb import request as config_request +from .solver.optimizer import pci_optimize as optimize +from .solver.pci_utils import get_cell_id, get_pci_value +from osdf.utils.mdc_utils import mdc_from_json + +""" +This application generates PCI Optimization API calls using the information received from PCI-Handler-MS, SDN-C +and Policy. +""" + + +def process_pci_optimation(request_json, osdf_config, flat_policies): + """ + Process a PCI request from a Client (build config-db, policy and API call, make the call, return result) + :param req_object: Request parameters from the client + :param osdf_config: Configuration specific to OSDF application (core + deployment) + :param flat_policies: policies related to pci (fetched based on request) + :return: response from PCI Opt + """ + try: + mdc_from_json(request_json) + rc = get_rest_client(request_json, service="pcih") + req_id = request_json["requestInfo"]["requestId"] + cell_info_list, network_cell_info = config_request(request_json, osdf_config, flat_policies) + pci_response = get_solutions(cell_info_list, network_cell_info, request_json) + + metrics_log.info(MH.inside_worker_thread(req_id)) + except Exception as err: + error_log.error("Error for {} {}".format(req_id, traceback.format_exc())) + + try: + body = build_json_error_body(err) + metrics_log.info(MH.sending_response(req_id, "ERROR")) + rc.request(json=body, noresponse=True) + except RequestException as err: + MDC.put('requestID',req_id) + error_log.error("Error sending asynchronous notification for {} {}".format(req_id, traceback.format_exc())) + raise err + + + try: + metrics_log.info(MH.calling_back_with_body(req_id, rc.url, pci_response)) + rc.request(json=pci_response, noresponse=True) + except RequestException: # can't do much here but log it and move on + error_log.error("Error sending asynchronous notification for {} {}".format(req_id, traceback.format_exc())) + + +def get_solutions(cell_info_list, network_cell_info, request_json): + status, pci_solutions, anr_solutions = build_solution_list(cell_info_list, network_cell_info, request_json) + return { + "transactionId": request_json['requestInfo']['transactionId'], + "requestId": request_json["requestInfo"]["requestId"], + "requestStatus": "completed", + "statusMessage": status, + "solutions": { + 'networkId': request_json['cellInfo']['networkId'], + 'pciSolutions': pci_solutions, + 'anrSolutions': anr_solutions + } + } + + +def build_solution_list(cell_info_list, network_cell_info, request_json): + status = "success" + req_id = request_json["requestInfo"]["requestId"] + try: + opt_solution = optimize(network_cell_info, cell_info_list, request_json) + pci_solutions = build_pci_solution(network_cell_info, opt_solution['pci']) + anr_solutions = build_anr_solution(network_cell_info, opt_solution.get('removables', {})) + except RuntimeError: + error_log.error("Failed finding solution for {} {}".format(req_id, traceback.format_exc())) + status = "failed" + return status, pci_solutions, anr_solutions + + +def build_pci_solution(network_cell_info, pci_solution): + pci_solutions = [] + for k, v in pci_solution.items(): + old_pci = get_pci_value(network_cell_info, k) + if old_pci != v: + response = { + 'cellId': get_cell_id(network_cell_info, k), + 'pci': v + } + pci_solutions.append(response) + return pci_solutions + + +def build_anr_solution(network_cell_info, removables): + anr_solutions = [] + for k, v in removables.items(): + response = { + 'cellId': get_cell_id(network_cell_info, k), + 'removeableNeighbors': list(map(lambda x: get_cell_id(network_cell_info, x), v)) + } + anr_solutions.append(response) + return anr_solutions diff --git a/apps/pci/optimizers/solver/__init__.py b/apps/pci/optimizers/solver/__init__.py new file mode 100644 index 0000000..e69de29 diff --git a/apps/pci/optimizers/solver/min_confusion.mzn b/apps/pci/optimizers/solver/min_confusion.mzn new file mode 100644 index 0000000..ff56c18 --- /dev/null +++ b/apps/pci/optimizers/solver/min_confusion.mzn @@ -0,0 +1,98 @@ +% ------------------------------------------------------------------------- +% Copyright (c) 2018 AT&T Intellectual Property +% +% Licensed under the Apache License, Version 2.0 (the "License"); +% you may not use this file except in compliance with the License. +% You may obtain a copy of the License at +% +% http://www.apache.org/licenses/LICENSE-2.0 +% +% Unless required by applicable law or agreed to in writing, software +% distributed under the License is distributed on an "AS IS" BASIS, +% WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +% See the License for the specific language governing permissions and +% limitations under the License. +% +% ------------------------------------------------------------------------- +% + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +% Parameters and its assertions +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% + +% Number of cells/radios. +int: NUM_NODES; + +% Maximum number of Physical Cell Identifiers to be assigned to the nodes. +int: NUM_PCIS; + +% Number of edges between neighbor nodes. There is a edge (i,j) if and only +% if nodes i and j are neighbors, i.e., an user equipment (UE) can make +% handoff between i and j. Such edges are used to avoid **COLLISION**, i.e., +% to guarantee that nodes i and j have different PCIs. +int: NUM_NEIGHBORS; + +% Each line represents an edge between direct neighbors as defined before. +array[1..NUM_NEIGHBORS, 1..2] of int: NEIGHBORS; + +% Number of undirect neighbor pairs (j, k) such that both j and k are direct +% neighbors of node i, i.e., (j, k) exits if and only if exists (i, j) and +% (i, k). Nodes (i, k) can generate "confunsions" in the network if they have +% the same PCI. Such edges are used to avoid/minimize **CONFUSIONS**. +int: NUM_SECOND_LEVEL_NEIGHBORS; + +% Each line represents an edge between undirect neighbors as defined before. +array[1..NUM_SECOND_LEVEL_NEIGHBORS, 1..2] of int: SECOND_LEVEL_NEIGHBORS; + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +% Decision variables +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% + +% Defines the PCI for each node. +array[0..NUM_NODES-1] of var 0..NUM_PCIS-1: pci; + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +% Constraints +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% + +% Direct neighbors must have different PCIs for avoid **COLLISION**. +constraint +forall(i in 1..NUM_NEIGHBORS)( + pci[NEIGHBORS[i, 1]] != pci[NEIGHBORS[i, 2]] +); + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +% Objective function +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% + +% Total number of confusions. +var int: total_confusions = + sum([bool2int(pci[SECOND_LEVEL_NEIGHBORS[i, 1]] == + pci[SECOND_LEVEL_NEIGHBORS[i, 2]]) + | i in 1..NUM_SECOND_LEVEL_NEIGHBORS]); + +% Minimize the total number of confusions. +solve :: int_search(pci, smallest, indomain_min, complete) +minimize total_confusions; + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +% Output +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% + +output +["PCI assigment"] ++ +["\nnode,pci"] ++ +[ + "\n" ++ show(node) ++ "," ++ show(pci[node]) +| node in 0..NUM_NODES-1 +] ++ + +["\n\nConfusions"] ++ +["\nTotal confusions: " ++ show(total_confusions)] ++ +["\nConfusion pairs"] ++ +[ + "\n" ++ show(SECOND_LEVEL_NEIGHBORS[i, 1]) ++ "," ++ + show(SECOND_LEVEL_NEIGHBORS[i, 2]) +| i in 1..NUM_SECOND_LEVEL_NEIGHBORS where + fix(pci[SECOND_LEVEL_NEIGHBORS[i, 1]] == pci[SECOND_LEVEL_NEIGHBORS[i, 2]]) +] diff --git a/apps/pci/optimizers/solver/min_confusion_inl.mzn b/apps/pci/optimizers/solver/min_confusion_inl.mzn new file mode 100644 index 0000000..0f0fc91 --- /dev/null +++ b/apps/pci/optimizers/solver/min_confusion_inl.mzn @@ -0,0 +1,140 @@ +% ------------------------------------------------------------------------- +% Copyright (c) 2018 AT&T Intellectual Property +% +% Licensed under the Apache License, Version 2.0 (the "License"); +% you may not use this file except in compliance with the License. +% You may obtain a copy of the License at +% +% http://www.apache.org/licenses/LICENSE-2.0 +% +% Unless required by applicable law or agreed to in writing, software +% distributed under the License is distributed on an "AS IS" BASIS, +% WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +% See the License for the specific language governing permissions and +% limitations under the License. +% +% ------------------------------------------------------------------------- +% + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +% Parameters and its assertions +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% + +% Number of cells/radios. +int: NUM_NODES; + +% Maximum number of Physical Cell Identifiers to be assigned to the nodes. +int: NUM_PCIS; + +% Number of edges between neighbor nodes. There is a edge (i,j) if and only +% if nodes i and j are neighbors, i.e., an user equipment (UE) can make +% handoff between i and j. Such edges are used to avoid **COLLISION**, i.e., +% to guarantee that nodes i and j have different PCIs. +int: NUM_NEIGHBORS; + +% Each line represents an edge between direct neighbors as defined before. +array[1..NUM_NEIGHBORS, 1..2] of int: NEIGHBORS; + +% Number of undirect neighbor pairs (j, k) such that both j and k are direct +% neighbors of node i, i.e., (j, k) exits if and only if exists (i, j) and +% (i, k). Nodes (i, k) can generate "confunsions" in the network if they have +% the same PCI. Such edges are used to avoid/minimize **CONFUSIONS**. +int: NUM_SECOND_LEVEL_NEIGHBORS; + +% Each line represents an edge between undirect neighbors as defined before. +array[1..NUM_SECOND_LEVEL_NEIGHBORS, 1..2] of int: SECOND_LEVEL_NEIGHBORS; + +% Number of ignorable neighbor links. Such links can be ignored during +% optimization if needed. +int: NUM_IGNORABLE_NEIGHBOR_LINKS; + +% The links that can be ignored if needed. Each line represents the two ends +% of the links, like the previous structures. +array[1..NUM_IGNORABLE_NEIGHBOR_LINKS, 1..2] of int: IGNORABLE_NEIGHBOR_LINKS; + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +% Decision variables +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% + +% Defines the PCI for each node. +array[0..NUM_NODES-1] of var 0..NUM_PCIS-1: pci; + +array[1..NUM_IGNORABLE_NEIGHBOR_LINKS] of var 0..1: used_ignorables; + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +% Constraints +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% + +% Direct neighbors must have different PCIs for avoid **COLLISION**. +% Forced links. +constraint +forall(i in 1..NUM_NEIGHBORS, j in 1..NUM_IGNORABLE_NEIGHBOR_LINKS + where + NEIGHBORS[i, 1] != IGNORABLE_NEIGHBOR_LINKS[j, 1] \/ + NEIGHBORS[i, 2] != IGNORABLE_NEIGHBOR_LINKS[j, 2] +)( + pci[NEIGHBORS[i, 1]] != pci[NEIGHBORS[i, 2]] +); + + +% Ignorable links. +constraint +forall(i in 1..NUM_NEIGHBORS, j in 1..NUM_IGNORABLE_NEIGHBOR_LINKS + where + NEIGHBORS[i, 1] == IGNORABLE_NEIGHBOR_LINKS[j, 1] /\ + NEIGHBORS[i, 2] == IGNORABLE_NEIGHBOR_LINKS[j, 2] +)( + used_ignorables[j] >= bool2int(pci[NEIGHBORS[i, 1]] == pci[NEIGHBORS[i, 2]]) +); + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +% Objective function +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% + +% Total number of confusions. +var int: total_confusions = + sum([bool2int(pci[SECOND_LEVEL_NEIGHBORS[i, 1]] == + pci[SECOND_LEVEL_NEIGHBORS[i, 2]]) + | i in 1..NUM_SECOND_LEVEL_NEIGHBORS]); + +% Total number of used ignorables links. +var int: total_used_ignorables = sum(used_ignorables); + +solve :: int_search(pci, smallest, indomain_min, complete) + +% Minimize the total number of confusions. +%minimize total_confusions; + +% Minimize the total number of confusions first, +% then the number of used ignorables links. +minimize (2 * NUM_IGNORABLE_NEIGHBOR_LINKS * total_confusions) + + total_used_ignorables; + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +% Output +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% + +output +["PCI assigment"] ++ +["\nnode,pci"] ++ +[ + "\n" ++ show(node) ++ "," ++ show(pci[node]) +| node in 0..NUM_NODES-1 +] ++ +["\n\nTotal used ignorables links: " ++ show(total_used_ignorables)] ++ +["\nUsed ignorables links: "] ++ +[ + "\n" ++ show(IGNORABLE_NEIGHBOR_LINKS[i, 1]) ++ + "," ++ show(IGNORABLE_NEIGHBOR_LINKS[i, 2]) + | i in 1..NUM_IGNORABLE_NEIGHBOR_LINKS where fix(used_ignorables[i] > 0) +] ++ +["\n\nConfusions"] ++ +["\nTotal confusions: " ++ show(total_confusions)] ++ +["\nConfusion pairs"] ++ +[ + "\n" ++ show(SECOND_LEVEL_NEIGHBORS[i, 1]) ++ "," ++ + show(SECOND_LEVEL_NEIGHBORS[i, 2]) + | i in 1..NUM_SECOND_LEVEL_NEIGHBORS where + fix(pci[SECOND_LEVEL_NEIGHBORS[i, 1]] == pci[SECOND_LEVEL_NEIGHBORS[i, 2]]) +] + diff --git a/apps/pci/optimizers/solver/no_conflicts_no_confusion.mzn b/apps/pci/optimizers/solver/no_conflicts_no_confusion.mzn new file mode 100644 index 0000000..0a9b3e3 --- /dev/null +++ b/apps/pci/optimizers/solver/no_conflicts_no_confusion.mzn @@ -0,0 +1,86 @@ +% ------------------------------------------------------------------------- +% Copyright (c) 2018 AT&T Intellectual Property +% +% Licensed under the Apache License, Version 2.0 (the "License"); +% you may not use this file except in compliance with the License. +% You may obtain a copy of the License at +% +% http://www.apache.org/licenses/LICENSE-2.0 +% +% Unless required by applicable law or agreed to in writing, software +% distributed under the License is distributed on an "AS IS" BASIS, +% WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +% See the License for the specific language governing permissions and +% limitations under the License. +% +% ------------------------------------------------------------------------- +% + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +% Parameters and its assertions +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% + +% Number of cells/radios. +int: NUM_NODES; + +% Maximum number of Physical Cell Identifiers to be assigned to the nodes. +int: NUM_PCIS; + +% Number of edges between neighbor nodes. There is a edge (i,j) if and only +% if nodes i and j are neighbors, i.e., an user equipment (UE) can make +% handoff between i and j. Such edges are used to avoid **COLLISIONS**, i.e., +% to guarantee that nodes i and j have different PCIs. +int: NUM_NEIGHBORS; + +% Each line represents an edge between direct neighbors as defined before. +array[1..NUM_NEIGHBORS, 1..2] of int: NEIGHBORS; + +% Number of undirect neighbor pairs (j, k) such that both j and k are direct +% neighbors of node i, i.e., (j, k) exits if and only if exists (i, j) and +% (i, k). Nodes (i, k) can generate "confunsions" in the network if they have +% the same PCI. Such edges are used to avoid/minimize **CONFUSIONS**. +int: NUM_SECOND_LEVEL_NEIGHBORS; + +% Each line represents an edge between undirect neighbors as defined before. +array[1..NUM_SECOND_LEVEL_NEIGHBORS, 1..2] of int: SECOND_LEVEL_NEIGHBORS; + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +% Decision variables +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% + +% Defines the PCI for each node. +array[0..NUM_NODES-1] of var 0..NUM_PCIS-1: pci; + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +% Constraints +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% + +% Direct neighbors must have different PCIs for avoid **COLLISION**. +constraint +forall(i in 1..NUM_NEIGHBORS)( + pci[NEIGHBORS[i, 1]] != pci[NEIGHBORS[i, 2]] +); + +% Undirect neighbors must have different PCIs for avoid **CONFUSIONS**. +constraint +forall(i in 1..NUM_SECOND_LEVEL_NEIGHBORS)( + pci[SECOND_LEVEL_NEIGHBORS[i, 1]] != pci[SECOND_LEVEL_NEIGHBORS[i, 2]] +); + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +% Objective function +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% + +% Just satisfy the problem. +solve :: int_search(pci, smallest, indomain_min, complete) satisfy; + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +% Output +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% + +output +["node,pci\n"] ++ +[ + show(node) ++ "," ++ show(pci[node]) ++ "\n" +| node in 0..NUM_NODES-1 +] diff --git a/apps/pci/optimizers/solver/optimizer.py b/apps/pci/optimizers/solver/optimizer.py new file mode 100644 index 0000000..0a6d5a4 --- /dev/null +++ b/apps/pci/optimizers/solver/optimizer.py @@ -0,0 +1,137 @@ +# ------------------------------------------------------------------------- +# Copyright (c) 2018 AT&T Intellectual Property +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +# +# ------------------------------------------------------------------------- +# + +import itertools +import os +from collections import defaultdict + +import pymzn + +from .pci_utils import get_id + +BASE_DIR = os.path.dirname(__file__) + + +def pci_optimize(network_cell_info, cell_info_list, request_json): + neighbor_edges = get_neighbor_list(network_cell_info) + second_level_edges = get_second_level_neighbor(network_cell_info) + ignorable_links = get_ignorable_links(network_cell_info, request_json) + anr_flag = is_anr(request_json) + + dzn_data = build_dzn_data(cell_info_list, ignorable_links, neighbor_edges, second_level_edges, anr_flag) + + return build_pci_solution(dzn_data, ignorable_links, anr_flag) + + +def build_pci_solution(dzn_data, ignorable_links, anr_flag): + mzn_solution = solve(get_mzn_model(anr_flag), dzn_data) + + solution = {'pci': mzn_solution[0]['pci']} + + if anr_flag: + removables = defaultdict(list) + used_ignorables = mzn_solution[0]['used_ignorables'] + index = 0 + for i in ignorable_links: + if used_ignorables[index] > 0: + removables[i[0]].append(i[1]) + index += 1 + solution['removables'] = removables + return solution + + +def build_dzn_data(cell_info_list, ignorable_links, neighbor_edges, second_level_edges, anr_flag): + dzn_data = { + 'NUM_NODES': len(cell_info_list), + 'NUM_PCIS': len(cell_info_list), + 'NUM_NEIGHBORS': len(neighbor_edges), + 'NEIGHBORS': get_list(neighbor_edges), + 'NUM_SECOND_LEVEL_NEIGHBORS': len(second_level_edges), + 'SECOND_LEVEL_NEIGHBORS': get_list(second_level_edges) + } + if anr_flag: + dzn_data['NUM_IGNORABLE_NEIGHBOR_LINKS'] = len(ignorable_links) + dzn_data['IGNORABLE_NEIGHBOR_LINKS'] = get_list(ignorable_links) + return dzn_data + + +def get_mzn_model(anr_flag): + if anr_flag: + mzn_model = os.path.join(BASE_DIR, 'min_confusion_inl.mzn') + else: + mzn_model = os.path.join(BASE_DIR, 'no_conflicts_no_confusion.mzn') + return mzn_model + + +def is_anr(request_json): + return 'pci-anr' in request_json["requestInfo"]["optimizers"] + + +def get_list(edge_list): + array_list = [] + for s in edge_list: + array_list.append([s[0], s[1]]) + return sorted(array_list) + + +def solve(mzn_model, dzn_data): + return pymzn.minizinc(mzn=mzn_model, data=dzn_data) + + +def get_neighbor_list(network_cell_info): + neighbor_list = set() + for cell in network_cell_info['cell_list']: + add_to_neighbor_list(network_cell_info, cell, neighbor_list) + return neighbor_list + + +def add_to_neighbor_list(network_cell_info, cell, neighbor_list): + for nbr in cell.get('nbr_list', []): + host_id = cell['id'] + nbr_id = get_id(network_cell_info, nbr['targetCellId']) + if nbr_id and host_id != nbr_id: + neighbor_list.add((host_id, nbr_id)) + + +def get_second_level_neighbor(network_cell_info): + second_neighbor_list = set() + for cell in network_cell_info['cell_list']: + comb_list = build_second_level_list(network_cell_info, cell) + for comb in comb_list: + if comb[0] and comb[1]: + second_neighbor_list.add((comb[0], comb[1])) + return sorted(second_neighbor_list) + + +def build_second_level_list(network_cell_info, cell): + second_nbr_list = [] + for nbr in cell.get('nbr_list', []): + second_nbr_list.append(get_id(network_cell_info, nbr['targetCellId'])) + return [list(elem) for elem in list(itertools.combinations(second_nbr_list, 2))] + + +def get_ignorable_links(network_cell_info, request_json): + ignorable_list = set() + anr_input_list = request_json["cellInfo"].get('anrInputList', []) + if anr_input_list: + for anr_info in anr_input_list: + cell_id = get_id(network_cell_info, anr_info['cellId']) + anr_removable = anr_info.get('removeableNeighbors', []) + for anr in anr_removable: + ignorable_list.add((cell_id, get_id(network_cell_info, anr))) + return ignorable_list diff --git a/apps/pci/optimizers/solver/pci_utils.py b/apps/pci/optimizers/solver/pci_utils.py new file mode 100644 index 0000000..04829cf --- /dev/null +++ b/apps/pci/optimizers/solver/pci_utils.py @@ -0,0 +1,40 @@ +# ------------------------------------------------------------------------- +# Copyright (c) 2018 AT&T Intellectual Property +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +# +# ------------------------------------------------------------------------- +# + + +def get_id(network_cell_info, cell_id): + for i in network_cell_info['cell_list']: + if i['cell_id'] == cell_id: + return i['id'] + return None + + +def get_cell_id(network_cell_info, id): + for i in network_cell_info['cell_list']: + if i['id'] == id: + return i['cell_id'] + return None + + +def get_pci_value(network_cell_info, id): + cell_id = get_cell_id(network_cell_info, id) + for i in network_cell_info['cell_list']: + for j in i['nbr_list']: + if cell_id == j['targetCellId']: + return j['pciValue'] + return None -- cgit 1.2.3-korg