# Copyright © 2019 Amdocs, Bell Canada
# Copyright (c) 2020 Nordix Foundation, Modifications
# Modifications Copyright © 2020 Nokia
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#       http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

#################################################################
# Global configuration overrides.
#
# These overrides will affect all helm charts (ie. applications)
# that are listed below and are 'enabled'.
#################################################################
global:
  # Change to an unused port prefix range to prevent port conflicts
  # with other instances running within the same k8s cluster
  nodePortPrefix: 302
  nodePortPrefixExt: 304


  # Install test components
  # test components are out of the scope of ONAP but allow to have a entire
  # environment to test the different features of ONAP
  # Current tests environments provided:
  #  - netbox (needed for CDS IPAM)
  #  - AWX (needed for XXX)
  #  - EJBCA Server (needed for CMPv2 tests)
  # Today, "contrib" chart that hosting these components must also be enabled
  # in order to make it work. So `contrib.enabled` must have the same value than
  # addTestingComponents
  addTestingComponents: &testing false

  # ONAP Repository
  # Uncomment the following to enable the use of a single docker
  # repository but ONLY if your repository mirrors all ONAP
  # docker images. This includes all images from dockerhub and
  # any other repository that hosts images for ONAP components.
  #repository: nexus3.onap.org:10001
  repositoryCred:
    user: docker
    password: docker
  dockerHubRepository: docker.io

  # readiness check
  readinessImage: onap/oom/readiness:3.0.1

  # curl image
  curlImage: curlimages/curl:7.69.1

  # logging agent - temporary repo until images migrated to nexus3
  loggingRepository: docker.elastic.co

  # dockerHub main repository
  dockerHubRepository: docker.io

  # busybox repo and image
  busyboxRepository: docker.io
  busyboxImage: busybox:1.30

  # kubeclt image
  kubectlImage: "bitnami/kubectl:1.15"

  # image pull policy
  pullPolicy: Always

  # default clusterName
  # {{ template "common.fullname" . }}.{{ template "common.namespace" . }}.svc.{{ .Values.global.clusterName }}
  clusterName: cluster.local

  # default mount path root directory referenced
  # by persistent volumes and log files
  persistence:
    mountPath: /dockerdata-nfs
    enableDefaultStorageclass: false
    parameters: {}
    storageclassProvisioner: kubernetes.io/no-provisioner
    volumeReclaimPolicy: Retain

  # override default resource limit flavor for all charts
  flavor: unlimited

  # flag to enable debugging - application support required
  debugEnabled: false

  # default password complexity
  # available options: phrase, name, pin, basic, short, medium, long, maximum security
  # More datails: https://masterpassword.app/masterpassword-algorithm.pdf
  passwordStrength: long

  # configuration to set log level to all components (the one that are using
  # "common.log.level" to set this)
  # can be overrided per components by setting logConfiguration.logLevelOverride
  # to the desired value
  # logLevel: DEBUG

  #Global ingress configuration
  ingress:
    enabled: false
    virtualhost:
      enabled: true
      baseurl: "simpledemo.onap.org"

  # Global Service Mesh configuration
  # POC Mode, don't use it in production
  serviceMesh:
    enabled: false
    tls: true

  # Disabling AAF
  # POC Mode, only for use in development environment
  # Keep it enabled in production
  aafEnabled: true
  aafAgentImage: onap/aaf/aaf_agent:2.1.20

  # Enabling CMPv2
  cmpv2Enabled: true
  platform:
    certServiceClient:
      image: onap/org.onap.oom.platform.cert-service.oom-certservice-client:2.1.1
      secret:
        name: oom-cert-service-client-tls-secret
        mountPath: /etc/onap/oom/certservice/certs/
      envVariables:
        # Certificate related
        cmpv2Organization: "Linux-Foundation"
        cmpv2OrganizationalUnit: "ONAP"
        cmpv2Location: "San-Francisco"
        cmpv2State: "California"
        cmpv2Country: "US"
        # Client configuration related
        caName: "RA"
        requestURL: "https://oom-cert-service:8443/v1/certificate/"
        requestTimeout: "30000"
        keystorePath: "/etc/onap/oom/certservice/certs/certServiceClient-keystore.jks"
        outputType: "P12"
        keystorePassword: "secret"
        truststorePath: "/etc/onap/oom/certservice/certs/truststore.jks"
        truststorePassword: "secret"

  # Indicates offline deployment build
  # Set to true if you are rendering helm charts for offline deployment
  # Otherwise keep it disabled
  offlineDeploymentBuild: false

  # TLS
  # Set to false if you want to disable TLS for NodePorts. Be aware that this
  # will loosen your security.
  # if set this element will force or not tls even if serviceMesh.tls is set.
  # tlsEnabled: false

  # Logging
  # Currently, centralized logging is not in best shape so it's disabled by
  # default
  centralizedLoggingEnabled: &centralizedLogging false

  # Example of specific for the components where you want to disable TLS only for
  # it:
  # if set this element will force or not tls even if global.serviceMesh.tls and
  # global.tlsEnabled is set otherwise.
  # robot:
  #   tlsOverride: false

  # Global storage configuration
  #    Set to "-" for default, or with the name of the storage class
  #    Please note that if you use AAF, CDS, SDC, Netbox or Robot, you need a
  #    storageclass with RWX capabilities (or set specific configuration for these
  #    components).
  # persistence:
  #   storageClass: "-"

# Example of specific for the components which requires RWX:
# aaf:
#   persistence:
#     storageClassOverride: "My_RWX_Storage_Class"
# contrib:
#   netbox:
#     netbox-app:
#       persistence:
#         storageClassOverride: "My_RWX_Storage_Class"
# cds:
#   cds-blueprints-processor:
#     persistence:
#       storageClassOverride: "My_RWX_Storage_Class"
# sdc:
#   sdc-onboarding-be:
#     persistence:
#       storageClassOverride: "My_RWX_Storage_Class"

#################################################################
# Enable/disable and configure helm charts (ie. applications)
# to customize the ONAP deployment.
#################################################################
aaf:
  enabled: false
aai:
  enabled: false
appc:
  enabled: false
  config:
    openStackType: OpenStackProvider
    openStackName: OpenStack
    openStackKeyStoneUrl: http://localhost:8181/apidoc/explorer/index.html
    openStackServiceTenantName: default
    openStackDomain: default
    openStackUserName: admin
    openStackEncryptedPassword: admin
cassandra:
  enabled: false
cds:
  enabled: false
clamp:
  enabled: false
cli:
  enabled: false
consul:
  enabled: false
# Today, "contrib" chart that hosting these components must also be enabled
# in order to make it work. So `contrib.enabled` must have the same value than
# addTestingComponents
contrib:
  enabled: *testing
dcaegen2:
  enabled: false
dcaemod:
  enabled: false
dmaap:
  enabled: false
esr:
  enabled: false
# Today, "logging" chart that perform the central part of logging must also be
# enabled in order to make it work. So `logging.enabled` must have the same
# value than centralizedLoggingEnabled
log:
  enabled: *centralizedLogging
sniro-emulator:
  enabled: false
oof:
  enabled: false
mariadb-galera:
  enabled: false
msb:
  enabled: false
multicloud:
  enabled: false
nbi:
  enabled: false
  config:
    # openstack configuration
    openStackRegion: "Yolo"
    openStackVNFTenantId: "1234"
policy:
  enabled: false
pomba:
  enabled: false
portal:
  enabled: false
robot:
  enabled: false
  config:
    # openStackEncryptedPasswordHere should match the encrypted string used in SO and APPC and overridden per environment
    openStackEncryptedPasswordHere: "c124921a3a0efbe579782cde8227681e"
sdc:
  enabled: false
sdnc:
  enabled: false

  replicaCount: 1

  mysql:
    replicaCount: 1
so:
  enabled: false

  replicaCount: 1

  liveness:
    # necessary to disable liveness probe when setting breakpoints
    # in debugger so K8s doesn't restart unresponsive container
    enabled: false

  # so server configuration
  config:
    # message router configuration
    dmaapTopic: "AUTO"
    # openstack configuration
    openStackUserName: "vnf_user"
    openStackRegion: "RegionOne"
    openStackKeyStoneUrl: "http://1.2.3.4:5000"
    openStackServiceTenantName: "service"
    openStackEncryptedPasswordHere: "c124921a3a0efbe579782cde8227681e"

  # in order to enable static password for so-monitoring uncomment:
  # so-monitoring:
  #   server:
  #     monitoring:
  #       password: demo123456!

  # configure embedded mariadb
  mariadb:
    config:
      mariadbRootPassword: password
uui:
  enabled: false
vfc:
  enabled: false
vid:
  enabled: false
vnfsdk:
  enabled: false
modeling:
  enabled: false
platform:
  enabled: false
a1policymanagement:
  enabled: false

cert-wrapper:
  enabled: true