From a4535c94d838cd0d784fd14ff8497be878c81176 Mon Sep 17 00:00:00 2001 From: Vijay Venkatesh Kumar Date: Fri, 2 Aug 2019 01:45:23 +0000 Subject: dcae el-alto earlydrop updates with released tag Following patches into staging are included with corresponding released image tag https://gerrit.onap.org/r/#/c/oom/+/91759/ https://gerrit.onap.org/r/#/c/oom/+/91832/ https://gerrit.onap.org/r/#/c/oom/+/90603/ https://gerrit.onap.org/r/#/c/oom/+/92569/ Change-Id: I369b8a3cb25476e466e61b6b23d3034f17a461b6 Signed-off-by: Vijay Venkatesh Kumar Issue-ID: DCAEGEN2-1318 Issue-ID: DCAEGEN2-913 Issue-ID: DCAEGEN2-1685 Issue-ID: DCAEGEN2-1597 Issue-ID: DCAEGEN2-909 Issue-ID: DCAEGEN2-904 Issue-ID: DCAEGEN2-1513 Issue-ID: DCAEGEN2-1550 Issue-ID: DCAEGEN2-1701 Issue-ID: DCAEGEN2-1694 Issue-ID: DCAEGEN2-1695 Issue-ID: DCAEGEN2-1718 Signed-off-by: Vijay Venkatesh Kumar --- kubernetes/dcaegen2/Makefile | 5 +- .../dcae-bootstrap/resources/certs/cacert.pem | 31 ++++ .../resources/config/dmaap-plugin.json | 8 + .../resources/config/k8s-plugin.json | 4 +- .../resources/inputs/k8s-dashboard-inputs.yaml | 2 +- .../charts/dcae-bootstrap/templates/configmap.yaml | 9 +- .../dcae-bootstrap/templates/deployment.yaml | 24 ++- .../dcaegen2/charts/dcae-bootstrap/values.yaml | 13 +- .../templates/deployment.yaml | 26 ++++ .../charts/dcae-cloudify-manager/values.yaml | 6 +- .../templates/deployment.yaml | 86 ++++++++++- .../templates/service.yaml | 31 ++-- .../charts/dcae-config-binding-service/values.yaml | 19 ++- .../dcaegen2/charts/dcae-dashboard/.helmignore | 22 +++ .../dcaegen2/charts/dcae-dashboard/Chart.yaml | 5 + .../charts/dcae-dashboard/requirements.yaml | 21 +++ .../dcae-dashboard/resources/log/filebeat.yml | 72 +++++++++ .../charts/dcae-dashboard/templates/configmap.yaml | 22 +++ .../dcae-dashboard/templates/deployment.yaml | 168 +++++++++++++++++++++ .../charts/dcae-dashboard/templates/service.yaml | 43 ++++++ .../dcaegen2/charts/dcae-dashboard/values.yaml | 126 ++++++++++++++++ .../resources/config/config.json | 6 +- .../templates/deployment.yaml | 4 +- .../charts/dcae-deployment-handler/values.yaml | 2 +- .../dcaegen2/charts/dcae-healthcheck/values.yaml | 2 +- .../resources/config/config.json | 11 +- .../dcae-inventory-api/templates/deployment.yaml | 18 +++ .../charts/dcae-inventory-api/values.yaml | 5 +- .../resources/config/config.json | 2 +- .../templates/deployment.yaml | 28 +++- .../charts/dcae-servicechange-handler/values.yaml | 4 +- 31 files changed, 780 insertions(+), 45 deletions(-) create mode 100644 kubernetes/dcaegen2/charts/dcae-bootstrap/resources/certs/cacert.pem create mode 100644 kubernetes/dcaegen2/charts/dcae-bootstrap/resources/config/dmaap-plugin.json create mode 100644 kubernetes/dcaegen2/charts/dcae-dashboard/.helmignore create mode 100644 kubernetes/dcaegen2/charts/dcae-dashboard/Chart.yaml create mode 100644 kubernetes/dcaegen2/charts/dcae-dashboard/requirements.yaml create mode 100644 kubernetes/dcaegen2/charts/dcae-dashboard/resources/log/filebeat.yml create mode 100644 kubernetes/dcaegen2/charts/dcae-dashboard/templates/configmap.yaml create mode 100644 kubernetes/dcaegen2/charts/dcae-dashboard/templates/deployment.yaml create mode 100644 kubernetes/dcaegen2/charts/dcae-dashboard/templates/service.yaml create mode 100644 kubernetes/dcaegen2/charts/dcae-dashboard/values.yaml (limited to 'kubernetes') diff --git a/kubernetes/dcaegen2/Makefile b/kubernetes/dcaegen2/Makefile index f77bc8fb16..fcd62da048 100644 --- a/kubernetes/dcaegen2/Makefile +++ b/kubernetes/dcaegen2/Makefile @@ -1,4 +1,4 @@ -make-dcaegen2: make-dcae-bootstrap make-dcae-cloudify-manager make-dcae-config-binding-service make-dcae-healthcheck make-dcae-redis make-dcae-servicechange-handler make-dcae-inventory-api make-dcae-deployment-handler make-dcae-policy-handler +make-dcaegen2: make-dcae-bootstrap make-dcae-cloudify-manager make-dcae-config-binding-service make-dcae-healthcheck make-dcae-redis make-dcae-servicechange-handler make-dcae-inventory-api make-dcae-deployment-handler make-dcae-policy-handler make-dcae-dashboard make-dcae-bootstrap: cd charts && helm dep up dcae-bootstrap && helm lint dcae-bootstrap @@ -26,3 +26,6 @@ make-dcae-deployment-handler: make-dcae-policy-handler: cd charts && helm dep up dcae-policy-handler && helm lint dcae-policy-handler + +make-dcae-dashboard: + cd charts && helm dep up dcae-dashboard && helm lint dcae-dashboard diff --git a/kubernetes/dcaegen2/charts/dcae-bootstrap/resources/certs/cacert.pem b/kubernetes/dcaegen2/charts/dcae-bootstrap/resources/certs/cacert.pem new file mode 100644 index 0000000000..897c8ae499 --- /dev/null +++ b/kubernetes/dcaegen2/charts/dcae-bootstrap/resources/certs/cacert.pem @@ -0,0 +1,31 @@ +-----BEGIN CERTIFICATE----- +MIIFPjCCAyagAwIBAgIJAJ6u7cCnzrWdMA0GCSqGSIb3DQEBCwUAMCwxDjAMBgNV +BAsMBU9TQUFGMQ0wCwYDVQQKDARPTkFQMQswCQYDVQQGEwJVUzAeFw0xODA0MDUx +NDE1MjhaFw0zODAzMzExNDE1MjhaMCwxDjAMBgNVBAsMBU9TQUFGMQ0wCwYDVQQK +DARPTkFQMQswCQYDVQQGEwJVUzCCAiIwDQYJKoZIhvcNAQEBBQADggIPADCCAgoC +ggIBAMA5pkgRs7NhGG4ew5JouhyYakgYUyFaG121+/h8qbSdt0hVQv56+EA41Yq7 +XGie7RYDQK9NmAFF3gruE+6X7wvJiChp+Cyd7sFMnb65uWhxEdxWTM2BJFrgfzUn +H8ZCxgaCo3XH4PzlKRy2LQQJEJECwl/RZmRCXijMt5e9h8XoZY/fKkKcZZUsWNCM +pTo266wjvA9MXLmdgReRj0+vrCjrNqy+htwJDztoiHWiYPqT6o8EvGcgjNqjlZx7 +NUNf8MfLDByqKF6+wRbHv1GKjn3/Vijd45Fv8riyRYROiFanvbV6jIfBkv8PZbXg +2VDWsYsgp8NAvMxK+iV8cO+Ck3lBI2GOPZbCEqpPVTYbLUz6sczAlCXwQoPzDIZY +wYa3eR/gYLY1gP2iEVHORag3bLPap9ZX5E8DZkzTNTjovvLk8KaCmfcaUMJsBtDd +ApcUitz10cnRyZc1sX3gE1f3DpzQM6t9C5sOVyRhDcSrKqqwb9m0Ss04XAS9FsqM +P3UWYQyqDXSxlUAYaX892u8mV1hxnt2gjb22RloXMM6TovM3sSrJS0wH+l1nznd6 +aFXftS/G4ZVIVZ/LfT1is4StoyPWZCwwwly1z8qJQ/zhip5NgZTxQw4mi7ww35DY +PdAQOCoajfSvFjqslQ/cPRi/MRCu079heVb5fQnnzVtnpFQRAgMBAAGjYzBhMB0G +A1UdDgQWBBRTVTPyS+vQUbHBeJrBKDF77+rtSTAfBgNVHSMEGDAWgBRTVTPyS+vQ +UbHBeJrBKDF77+rtSTAPBgNVHRMBAf8EBTADAQH/MA4GA1UdDwEB/wQEAwIBhjAN +BgkqhkiG9w0BAQsFAAOCAgEAPx/IaK94n02wPxpnYTy+LVLIxwdq/kawNd6IbiMz +L87zmNMDmHcGbfoRCj8OkhuggX9Lx1/CkhpXimuYsZOFQi5blr/u+v4mIbsgbmi9 +7j+cUHDP0zLycvSvxKHty51LwmaX9a4wkJl5zBU4O1sd/H9tWcEmwJ39ltKoBKBx +c94Zc3iMm5ytRWGj+0rKzLDAXEWpoZ5bE5PLJauA6UDCxDLfs3FwhbS7uDggxYvf +jySF5FCNET94oJ+m8s7VeHvoa8iPGKvXrIqdd7XDHnqJJlVKr7m9S0fMbyEB8ci2 +RtOXDt93ifY1uhoEtEykn4dqBSp8ezvNMnwoXdYPDvTd9uCAFeWFLVreBAWxd25h +PsBTkZA5hpa/rA+mKv6Af4VBViYr8cz4dZCsFChuioVebe9ighrfjB//qKepFjPF +CyjzKN1u0JKm/2x/ORqxkTONG8p3uDwoIOyimUcTtTMv42bfYD88RKakqSFXE9G+ +Z0LlaKABqfjK49o/tsAp+c5LoNlYllKhnetO3QAdraHwdmC36BhoghzR1jpX751A +cZn2VH3Q4XKyp01cJNCJIrua+A+bx6zh3RyW6zIIkbRCbET+UD+4mr8WIcSE3mtR +ZVlnhUDO4z9//WKMVzwS9Rh8/kuszrGFI1KQozXCHLrce3YP6RYZfOed79LXaRwX +dYY= +-----END CERTIFICATE----- \ No newline at end of file diff --git a/kubernetes/dcaegen2/charts/dcae-bootstrap/resources/config/dmaap-plugin.json b/kubernetes/dcaegen2/charts/dcae-bootstrap/resources/config/dmaap-plugin.json new file mode 100644 index 0000000000..41404b0199 --- /dev/null +++ b/kubernetes/dcaegen2/charts/dcae-bootstrap/resources/config/dmaap-plugin.json @@ -0,0 +1,8 @@ +{ + "dmaap": { + "username": "notused", + "password": "doesnotmatter", + "owner": "dcaecm", + "protocol": "http" + } +} \ No newline at end of file diff --git a/kubernetes/dcaegen2/charts/dcae-bootstrap/resources/config/k8s-plugin.json b/kubernetes/dcaegen2/charts/dcae-bootstrap/resources/config/k8s-plugin.json index 51d31a355b..d459d5bb95 100644 --- a/kubernetes/dcaegen2/charts/dcae-bootstrap/resources/config/k8s-plugin.json +++ b/kubernetes/dcaegen2/charts/dcae-bootstrap/resources/config/k8s-plugin.json @@ -33,6 +33,8 @@ "tls": { "cert_path": "/opt/tls/shared", - "image": "{{ .Values.global.tlsRepository }}/{{ .Values.global.tlsImage }}" + "image": "{{ .Values.global.tlsRepository }}/{{ .Values.global.tlsImage }}", + "component_ca_cert_path": "/opt/dcae/cacert/cacert.pem", + "ca_cert_configmap": "{{ include "common.fullname" . }}-dcae-cacert" } } diff --git a/kubernetes/dcaegen2/charts/dcae-bootstrap/resources/inputs/k8s-dashboard-inputs.yaml b/kubernetes/dcaegen2/charts/dcae-bootstrap/resources/inputs/k8s-dashboard-inputs.yaml index e40a03068c..2718e1882f 100644 --- a/kubernetes/dcaegen2/charts/dcae-bootstrap/resources/inputs/k8s-dashboard-inputs.yaml +++ b/kubernetes/dcaegen2/charts/dcae-bootstrap/resources/inputs/k8s-dashboard-inputs.yaml @@ -24,7 +24,7 @@ external_tls_port: {{ .Values.config.address.dashboard.portSecure }} database_cluster_name: {{ .Values.postgres.service.name2 }}.{{ include "common.namespace" . }} database_cluster_fqdn: {{ .Values.postgres.service.name2 }}.{{ include "common.namespace" . }}.{{ .Values.postgres.suffix }} database_name: "dashboard_pg" -cloudify_ip: {{ .Values.config.address.cm }} +cloudify_ip: {{ .Values.config.address.cm.host }} cloudify_user: "admin" cloudify_password: "admin" consul_url: {{ .Values.config.address.consul_ui }} diff --git a/kubernetes/dcaegen2/charts/dcae-bootstrap/templates/configmap.yaml b/kubernetes/dcaegen2/charts/dcae-bootstrap/templates/configmap.yaml index 878d94bfc6..21134ada9f 100644 --- a/kubernetes/dcaegen2/charts/dcae-bootstrap/templates/configmap.yaml +++ b/kubernetes/dcaegen2/charts/dcae-bootstrap/templates/configmap.yaml @@ -31,4 +31,11 @@ metadata: namespace: {{ include "common.namespace" . }} data: {{ tpl (.Files.Glob "resources/inputs/*").AsConfig . | indent 2 }} - +--- +apiVersion: v1 +kind: ConfigMap +metadata: + name: {{ include "common.fullname" . }}-dcae-cacert + namespace: {{ include "common.namespace" . }} +data: +{{ tpl (.Files.Glob "resources/certs/*").AsConfig . | indent 2 }} diff --git a/kubernetes/dcaegen2/charts/dcae-bootstrap/templates/deployment.yaml b/kubernetes/dcaegen2/charts/dcae-bootstrap/templates/deployment.yaml index 0463655c79..be5a769a37 100644 --- a/kubernetes/dcaegen2/charts/dcae-bootstrap/templates/deployment.yaml +++ b/kubernetes/dcaegen2/charts/dcae-bootstrap/templates/deployment.yaml @@ -61,6 +61,19 @@ spec: fieldRef: apiVersion: v1 fieldPath: metadata.namespace + - name: init-tls + env: + - name: POD_IP + valueFrom: + fieldRef: + apiVersion: v1 + fieldPath: status.podIP + image: {{ .Values.global.tlsRepository }}/{{ .Values.global.tlsImage }} + imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }} + resources: {} + volumeMounts: + - mountPath: /opt/tls/shared + name: tls-info containers: - name: {{ include "common.name" . }} image: "{{ include "common.repository" . }}/{{ .Values.image }}" @@ -75,14 +88,21 @@ spec: - mountPath: /etc/localtime name: localtime readOnly: true + - mountPath: /certs + name: tls-info + readOnly: true env: - name: CMADDR - value: {{ .Values.config.address.cm }} + value: {{ .Values.config.address.cm.host }} - name: CMPASS valueFrom: secretKeyRef: name: {{ include "common.name" . }}-cmpass key: password + - name: CMPROTO + value: {{ .Values.config.address.cm.proto }} + - name: CMPORT + value: !!string {{ .Values.config.address.cm.port }} - name: CONSUL value: {{ .Values.config.address.consul.host }}:{{ .Values.config.address.consul.port }} - name: DCAE_NAMESPACE @@ -99,5 +119,7 @@ spec: - name: localtime hostPath: path: /etc/localtime + - name: tls-info + emptyDir: {} imagePullSecrets: - name: "{{ include "common.namespace" . }}-docker-registry-key" diff --git a/kubernetes/dcaegen2/charts/dcae-bootstrap/values.yaml b/kubernetes/dcaegen2/charts/dcae-bootstrap/values.yaml index aec082fe15..7e93715e29 100644 --- a/kubernetes/dcaegen2/charts/dcae-bootstrap/values.yaml +++ b/kubernetes/dcaegen2/charts/dcae-bootstrap/values.yaml @@ -38,10 +38,15 @@ config: host: consul-server port: 8500 consul_ui: consul-server-ui - cm: dcae-cloudify-manager + cm: + host: dcae-cloudify-manager + port: 443 + proto: https + #Temporary assignment to avoid conflict + #To be removed after bootstrap changes done to remove dashboard dashboard: - port: 30418 - portSecure: 30419 + port: 30473 + portSecure: 30474 datafile_collector: port: 30223 portSecure: 30262 @@ -90,7 +95,7 @@ postgres: # application image repository: nexus3.onap.org:10001 -image: onap/org.onap.dcaegen2.deployments.k8s-bootstrap-container:1.4.18 +image: onap/org.onap.dcaegen2.deployments.k8s-bootstrap-container:1.6.2 default_k8s_location: central # DCAE component images to be deployed via Cloudify Manager diff --git a/kubernetes/dcaegen2/charts/dcae-cloudify-manager/templates/deployment.yaml b/kubernetes/dcaegen2/charts/dcae-cloudify-manager/templates/deployment.yaml index d6c58cd75f..b3e90a2efb 100644 --- a/kubernetes/dcaegen2/charts/dcae-cloudify-manager/templates/deployment.yaml +++ b/kubernetes/dcaegen2/charts/dcae-cloudify-manager/templates/deployment.yaml @@ -34,6 +34,12 @@ spec: app: {{ include "common.name" . }} release: {{ .Release.Name }} spec: + # host alias allows local 'cfy' command to use https and match + # the host name in the certificate + hostAliases: + - ip: "127.0.0.1" + hostnames: + - "dcae-cloudify-manager" initContainers: - name: {{ include "common.name" . }}-multisite-init image: {{ include "common.repository" . }}/{{ .Values.multisiteInitImage }} @@ -44,10 +50,26 @@ spec: - --configmap - {{ .Values.multisiteConfigMapName }} restartPolicy: Never + - name: init-tls + env: + - name: POD_IP + valueFrom: + fieldRef: + apiVersion: v1 + fieldPath: status.podIP + image: {{ .Values.global.tlsRepository }}/{{ .Values.global.tlsImage }} + imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }} + resources: {} + volumeMounts: + - mountPath: /opt/tls/shared + name: tls-info containers: - name: {{ include "common.name" . }} image: "{{ include "common.repository" . }}/{{ .Values.image }}" imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }} + env: + - name: REQUESTS_CA_BUNDLE + value: "/opt/onap/certs/cacert.pem" resources: {{ include "common.resources" . | indent 12 }} ports: @@ -86,6 +108,8 @@ spec: readOnly: true - mountPath: /cfy-persist name: cm-persistent + - mountPath: /opt/onap/certs + name: tls-info securityContext: privileged: True volumes: @@ -107,5 +131,7 @@ spec: - name: cm-persistent persistentVolumeClaim: claimName: {{ include "common.fullname" . }}-data + - emptyDir: {} + name: tls-info imagePullSecrets: - name: "{{ include "common.namespace" . }}-docker-registry-key" diff --git a/kubernetes/dcaegen2/charts/dcae-cloudify-manager/values.yaml b/kubernetes/dcaegen2/charts/dcae-cloudify-manager/values.yaml index 41f0750c78..70504efd75 100644 --- a/kubernetes/dcaegen2/charts/dcae-cloudify-manager/values.yaml +++ b/kubernetes/dcaegen2/charts/dcae-cloudify-manager/values.yaml @@ -44,7 +44,7 @@ config: ################################################################# # application image repository: nexus3.onap.org:10001 -image: onap/org.onap.dcaegen2.deployments.cm-container:1.6.2 +image: onap/org.onap.dcaegen2.deployments.cm-container:2.0.2 pullPolicy: Always # name of shared ConfigMap with kubeconfig for multiple clusters @@ -69,8 +69,8 @@ readiness: service: type: ClusterIP name: dcae-cloudify-manager - externalPort: 80 - internalPort: 80 + externalPort: 443 + internalPort: 443 # Resource Limit flavor -By Default using small flavor: small diff --git a/kubernetes/dcaegen2/charts/dcae-config-binding-service/templates/deployment.yaml b/kubernetes/dcaegen2/charts/dcae-config-binding-service/templates/deployment.yaml index a968204575..19fe038d44 100644 --- a/kubernetes/dcaegen2/charts/dcae-config-binding-service/templates/deployment.yaml +++ b/kubernetes/dcaegen2/charts/dcae-config-binding-service/templates/deployment.yaml @@ -50,36 +50,60 @@ spec: fieldRef: apiVersion: v1 fieldPath: metadata.namespace + {{- if .Values.service.secure.enabled }} + - name: init-tls + env: + - name: POD_IP + valueFrom: + fieldRef: + apiVersion: v1 + fieldPath: status.podIP + image: {{ .Values.global.tlsRepository }}/{{ .Values.global.tlsImage }} + imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }} + resources: {} + volumeMounts: + - mountPath: /opt/tls/shared + name: tls-info + {{ end }} containers: + {{- if .Values.service.secure.enabled }} - name: {{ include "common.name" . }} image: "{{ include "common.repository" . }}/{{ .Values.image }}" imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }} resources: {{ include "common.resources" . | indent 12 }} ports: - - containerPort: {{ .Values.service.internalPort }} + - containerPort: {{ .Values.service.secure.internalPort }} # disable liveness probe when breakpoints set in debugger # so K8s doesn't restart unresponsive container {{- if eq .Values.liveness.enabled true }} livenessProbe: tcpSocket: - port: {{ .Values.service.internalPort }} + port: {{ .Values.service.secure.internalPort }} initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }} periodSeconds: {{ .Values.liveness.periodSeconds }} {{ end -}} readinessProbe: httpGet: + scheme: "HTTPS" path: {{ .Values.readiness.path }} - port: {{ .Values.service.internalPort }} + port: {{ .Values.service.secure.internalPort }} initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }} periodSeconds: {{ .Values.readiness.periodSeconds }} volumeMounts: - name: {{ include "common.fullname" . }}-logs mountPath: /opt/logs + - name: tls-info + mountPath: /opt/tls env: - name: CONSUL_HOST value: consul.{{ include "common.namespace" . }} - + - name: USE_HTTPS + value: "1" + - name: HTTPS_CERT_PATH + value: "/opt/tls/cert.pem" + - name: HTTPS_KEY_PATH + value: "/opt/tls/key.pem" - name: {{ include "common.name" . }}-filebeat-onap image: "{{ .Values.global.loggingRepository }}/{{ .Values.global.loggingImage }}" imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }} @@ -91,13 +115,67 @@ spec: mountPath: /usr/share/filebeat/data - name: {{ include "common.fullname" . }}-logs mountPath: /var/log/onap + {{ end }} + {{- if .Values.service.insecure.enabled }} + - name: {{ include "common.name" . }}-insecure + image: "{{ include "common.repository" . }}/{{ .Values.image }}" + imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }} + resources: +{{ include "common.resources" . | indent 12 }} + ports: + - containerPort: {{ .Values.service.insecure.internalPort }} + # disable liveness probe when breakpoints set in debugger + # so K8s doesn't restart unresponsive container + {{- if eq .Values.liveness.enabled true }} + livenessProbe: + tcpSocket: + port: {{ .Values.service.insecure.internalPort }} + initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }} + periodSeconds: {{ .Values.liveness.periodSeconds }} + {{ end -}} + readinessProbe: + httpGet: + scheme: "HTTP" + path: {{ .Values.readiness.path }} + port: {{ .Values.service.insecure.internalPort }} + initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }} + periodSeconds: {{ .Values.readiness.periodSeconds }} + volumeMounts: + - name: {{ include "common.fullname" . }}-logs-insecure + mountPath: /opt/logs + env: + - name: CONSUL_HOST + value: consul.{{ include "common.namespace" . }} + - name: {{ include "common.name" . }}-filebeat-onap-insecure + image: "{{ .Values.global.loggingRepository }}/{{ .Values.global.loggingImage }}" + imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }} + volumeMounts: + - name: {{ include "common.fullname" . }}-filebeat-conf + mountPath: /usr/share/filebeat/filebeat.yml + subPath: filebeat.yml + - name: {{ include "common.fullname" . }}-data-filebeat-insecure + mountPath: /usr/share/filebeat/data + - name: {{ include "common.fullname" . }}-logs-insecure + mountPath: /var/log/onap + {{ end }} volumes: - name: {{ include "common.fullname" . }}-filebeat-conf configMap: name: {{ .Release.Name }}-cbs-filebeat-configmap + {{- if .Values.service.secure.enabled }} - name: {{ include "common.fullname" . }}-data-filebeat emptyDir: {} - name: {{ include "common.fullname" . }}-logs emptyDir: {} + - name: tls-info + emptyDir: {} + {{ end }} + {{- if .Values.service.insecure.enabled }} + - name: {{ include "common.fullname" . }}-data-filebeat-insecure + emptyDir: {} + - name: {{ include "common.fullname" . }}-logs-insecure + emptyDir: {} + {{ end }} + imagePullSecrets: - name: "{{ include "common.namespace" . }}-docker-registry-key" diff --git a/kubernetes/dcaegen2/charts/dcae-config-binding-service/templates/service.yaml b/kubernetes/dcaegen2/charts/dcae-config-binding-service/templates/service.yaml index 794b896eef..8176e77c1e 100644 --- a/kubernetes/dcaegen2/charts/dcae-config-binding-service/templates/service.yaml +++ b/kubernetes/dcaegen2/charts/dcae-config-binding-service/templates/service.yaml @@ -28,16 +28,29 @@ metadata: spec: type: {{ .Values.service.type }} ports: - {{if eq .Values.service.type "NodePort" -}} - - port: {{ .Values.service.externalPort }} - nodePort: {{ .Values.global.nodePortPrefixExt| default .Values.nodePortPrefixExt }}{{ .Values.service.nodePort }} - name: {{ .Values.service.name }} + {{ if eq .Values.service.type "NodePort" -}} + {{ if .Values.service.insecure.enabled -}} + - port: {{ .Values.service.insecure.externalPort }} + nodePort: {{ .Values.global.nodePortPrefixExt| default .Values.nodePortPrefixExt }}{{ .Values.service.insecure.nodePort }} + name: {{ .Values.service.name }}-insecure + {{- end }} + {{ if .Values.service.secure.enabled -}} + - port: {{ .Values.service.secure.externalPort }} + nodePort: {{ .Values.global.nodePortPrefixExt| default .Values.nodePortPrefixExt }}{{ .Values.service.secure.nodePort }} + name: {{ .Values.service.name }}-secure + {{- end }} {{- else -}} - - port: {{ .Values.service.externalPort }} - targetPort: {{ .Values.service.internalPort }} - name: {{ .Values.service.name }} - {{- end}} + {{ if .Values.service.insecure.enabled -}} + - port: {{ .Values.service.insecure.externalPort }} + targetPort: {{ .Values.service.insecure.internalPort }} + name: {{ .Values.service.name }}-insecure + {{- end }} + {{ if .Values.service.secure.enabled -}} + - port: {{ .Values.service.secure.externalPort }} + targetPort: {{ .Values.service.secure.internalPort }} + name: {{ .Values.service.name }}-secure + {{- end }} + {{- end }} selector: app: {{ include "common.name" . }} release: {{ .Release.Name }} - diff --git a/kubernetes/dcaegen2/charts/dcae-config-binding-service/values.yaml b/kubernetes/dcaegen2/charts/dcae-config-binding-service/values.yaml index 4605e88c09..c7db0d5518 100644 --- a/kubernetes/dcaegen2/charts/dcae-config-binding-service/values.yaml +++ b/kubernetes/dcaegen2/charts/dcae-config-binding-service/values.yaml @@ -25,6 +25,8 @@ global: readinessImage: readiness-check:2.0.0 loggingRepository: docker.elastic.co loggingImage: beats/filebeat:5.5.0 + tlsRepository: nexus3.onap.org:10001 + tlsImage: onap/org.onap.dcaegen2.deployments.tls-init-container:1.0.3 repositoryCred: user: docker password: docker @@ -43,7 +45,7 @@ config: ################################################################# # application image repository: nexus3.onap.org:10001 -image: onap/org.onap.dcaegen2.platform.configbinding.app-app:2.3.0 +image: onap/org.onap.dcaegen2.platform.configbinding:2.5.1 pullPolicy: Always # probe configuration parameters @@ -63,9 +65,18 @@ readiness: service: type: NodePort name: config-binding-service - externalPort: 10000 - internalPort: 10000 - nodePort: 15 + # TLS service + secure: + enabled: true + externalPort: 10443 + internalPort: 10443 + nodePort: 14 + # Non-TLS service + insecure: + enabled: true + externalPort: 10000 + internalPort: 10000 + nodePort: 15 # Resource Limit flavor -By Default using small flavor: small diff --git a/kubernetes/dcaegen2/charts/dcae-dashboard/.helmignore b/kubernetes/dcaegen2/charts/dcae-dashboard/.helmignore new file mode 100644 index 0000000000..50af031725 --- /dev/null +++ b/kubernetes/dcaegen2/charts/dcae-dashboard/.helmignore @@ -0,0 +1,22 @@ +# Patterns to ignore when building packages. +# This supports shell glob matching, relative path matching, and +# negation (prefixed with !). Only one pattern per line. +.DS_Store +# Common VCS dirs +.git/ +.gitignore +.bzr/ +.bzrignore +.hg/ +.hgignore +.svn/ +# Common backup files +*.swp +*.bak +*.tmp +*~ +# Various IDEs +.project +.idea/ +*.tmproj +.vscode/ diff --git a/kubernetes/dcaegen2/charts/dcae-dashboard/Chart.yaml b/kubernetes/dcaegen2/charts/dcae-dashboard/Chart.yaml new file mode 100644 index 0000000000..5250c17584 --- /dev/null +++ b/kubernetes/dcaegen2/charts/dcae-dashboard/Chart.yaml @@ -0,0 +1,5 @@ +apiVersion: v1 +appVersion: "1.0" +description: DCAE Dashboard +name: dcae-dashboard +version: 5.0.0 diff --git a/kubernetes/dcaegen2/charts/dcae-dashboard/requirements.yaml b/kubernetes/dcaegen2/charts/dcae-dashboard/requirements.yaml new file mode 100644 index 0000000000..b0e70b3c2f --- /dev/null +++ b/kubernetes/dcaegen2/charts/dcae-dashboard/requirements.yaml @@ -0,0 +1,21 @@ +# Copyright © 2018 AT&T, Amdocs, Bell Canada Intellectual Property. All rights reserved. +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +dependencies: + - name: common + version: ~5.x-0 + repository: '@local' + - name: postgres + version: ~5.x-0 + repository: '@local' diff --git a/kubernetes/dcaegen2/charts/dcae-dashboard/resources/log/filebeat.yml b/kubernetes/dcaegen2/charts/dcae-dashboard/resources/log/filebeat.yml new file mode 100644 index 0000000000..0e5ee9bffa --- /dev/null +++ b/kubernetes/dcaegen2/charts/dcae-dashboard/resources/log/filebeat.yml @@ -0,0 +1,72 @@ +#============LICENSE_START======================================================== +# ================================================================================ +# Copyright (c) 2018-2019 AT&T Intellectual Property. All rights reserved. +# Modifications Copyright © 2018 Amdocs, Bell Canada +# ================================================================================ +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +# ============LICENSE_END========================================================= +filebeat.prospectors: +#it is mandatory, in our case it's log +- input_type: log + #This is the canolical path as mentioned in logback.xml, *.* means it will monitor all files in the directory. + paths: + - /var/log/onap/*/*/*/*.log + - /var/log/onap/*/*/*.log + - /var/log/onap/*/*.log + #Files older than this should be ignored.In our case it will be 48 hours i.e. 2 days. It is a helping flag for clean_inactive + ignore_older: 48h + # Remove the registry entry for a file that is more than the specified time. In our case it will be 96 hours, i.e. 4 days. It will help to keep registry records with in limit + clean_inactive: 96h + + +# Name of the registry file. If a relative path is used, it is considered relative to the +# data path. Else full qualified file name. +#filebeat.registry_file: ${path.data}/registry + + +output.logstash: + #List of logstash server ip addresses with port number. + #But, in our case, this will be the loadbalancer IP address. + #For the below property to work the loadbalancer or logstash should expose 5044 port to listen the filebeat events or port in the property should be changed appropriately. + hosts: ["{{.Values.config.logstashServiceName}}.{{.Release.Namespace}}:{{.Values.config.logstashPort}}"] + #If enable will do load balancing among availabe Logstash, automatically. + loadbalance: true + + #The list of root certificates for server verifications. + #If certificate_authorities is empty or not set, the trusted + #certificate authorities of the host system are used. + #ssl.certificate_authorities: $ssl.certificate_authorities + + #The path to the certificate for SSL client authentication. If the certificate is not specified, + #client authentication is not available. + #ssl.certificate: $ssl.certificate + + #The client certificate key used for client authentication. + #ssl.key: $ssl.key + + #The passphrase used to decrypt an encrypted key stored in the configured key file + #ssl.key_passphrase: $ssl.key_passphrase + +logging: + level: debug + + # enable file rotation with default configuration + to_files: true + + # do not log to syslog + to_syslog: false + + files: + path: /usr/share/filebeat/logs + name: mybeat.log + keepfiles: 7 diff --git a/kubernetes/dcaegen2/charts/dcae-dashboard/templates/configmap.yaml b/kubernetes/dcaegen2/charts/dcae-dashboard/templates/configmap.yaml new file mode 100644 index 0000000000..41d5826e13 --- /dev/null +++ b/kubernetes/dcaegen2/charts/dcae-dashboard/templates/configmap.yaml @@ -0,0 +1,22 @@ +# Copyright © 2017 Amdocs, Bell Canada +# Modifications Copyright © 2019 AT&T +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +apiVersion: v1 +kind: ConfigMap +metadata: + name: {{include "common.fullname" . }}-filebeat-configmap + namespace: {{include "common.namespace" . }} +data: +{{ tpl (.Files.Glob "resources/log/*").AsConfig . | indent 2 }} + diff --git a/kubernetes/dcaegen2/charts/dcae-dashboard/templates/deployment.yaml b/kubernetes/dcaegen2/charts/dcae-dashboard/templates/deployment.yaml new file mode 100644 index 0000000000..779844c0e3 --- /dev/null +++ b/kubernetes/dcaegen2/charts/dcae-dashboard/templates/deployment.yaml @@ -0,0 +1,168 @@ +#============LICENSE_START======================================================== +# ================================================================================ +# Copyright (c) 2019 AT&T Intellectual Property. All rights reserved. +# ================================================================================ +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +# ============LICENSE_END========================================================= + +apiVersion: extensions/v1beta1 +kind: Deployment +metadata: + name: {{ include "common.fullname" . }} + namespace: {{ include "common.namespace" . }} + labels: + app: {{ include "common.name" . }} + chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} + release: {{ .Release.Name }} + heritage: {{ .Release.Service }} +spec: + replicas: 1 + template: + metadata: + labels: + app: {{ include "common.name" . }} + release: {{ .Release.Name }} + spec: + initContainers: + - name: {{ include "common.name" . }}-readiness + image: {{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }} + imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }} + command: + - /root/ready.py + args: + - --container-name + - dcae-cloudify-manager + - --container-name + - consul-server + - --container-name + - dcae-inventory-api + - --container-name + - dcae-deployment-handler + - --container-name + - {{ .Values.postgres.nameOverride }} + - "-t" + - "45" + env: + - name: NAMESPACE + valueFrom: + fieldRef: + apiVersion: v1 + fieldPath: metadata.namespace + - name: init-tls + env: + - name: POD_IP + valueFrom: + fieldRef: + apiVersion: v1 + fieldPath: status.podIP + image: {{ .Values.global.tlsRepository }}/{{ .Values.global.tlsImage }} + imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }} + resources: {} + volumeMounts: + - mountPath: /opt/tls/shared + name: tls-info + containers: + - name: {{ include "common.name" . }} + image: "{{ include "common.repository" . }}/{{ .Values.image }}" + imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }} + resources: +{{ include "common.resources" . | indent 12 }} + ports: + - containerPort: {{ .Values.service.internalPort }} + protocol: TCP + # disable liveness probe when breakpoints set in debugger + # so K8s doesn't restart unresponsive container + {{- if eq .Values.liveness.enabled true }} + livenessProbe: + tcpSocket: + port: {{ .Values.service.internalPort }} + initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }} + periodSeconds: {{ .Values.liveness.periodSeconds }} + {{ end }} + readinessProbe: + httpGet: + path: {{ .Values.readiness.path }} + port: {{ .Values.service.internalPort }} + scheme: {{ .Values.readiness.scheme }} + initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }} + periodSeconds: {{ .Values.readiness.periodSeconds }} + failureThreshold: 1 + successThreshold: 1 + timeoutSeconds: 1 + volumeMounts: + - mountPath: /usr/local/share/ca-certificates/ + name: tls-info + env: + - name: CONSUL_HOST + value: consul-server.{{ include "common.namespace" . }} + - name: CONFIG_BINDING_SERVICE + value: config-binding-service + - name: inventory_url + value: {{ .Values.config.inventory_url }} + - name: postgres_port + value: "{{ .Values.postgres.config.pgPort }}" + - name: cloudify_password + value: admin + - name: dhandler_url + value: {{ .Values.config.dhandler_url }} + - name: cfy_url + value: {{ .Values.config.cfy_url }} + - name: cloudify_user + value: admin + - name: consul_url + value: http://consul-server-ui:8500 + - name: postgres_user_dashboard + value: {{ .Values.postgres.config.pgUserName }} + - name: postgres_db_name + value: {{ .Values.postgres.config.pgDatabase }} + - name: postgres_password_dashboard + value: {{ .Values.postgres.config.pgUserPassword }} + - name: postgres_ip + value: {{ .Values.postgres.service.name2 }} + - name: POD_IP + valueFrom: + fieldRef: + apiVersion: v1 + fieldPath: status.podIP + - name: {{ include "common.name" . }}-filebeat + env: + - name: POD_IP + valueFrom: + fieldRef: + apiVersion: v1 + fieldPath: status.podIP + image: {{ .Values.global.loggingRepository }}/{{ .Values.global.loggingImage }} + imagePullPolicy: IfNotPresent + resources: {} + volumeMounts: + - mountPath: /var/log/onap/dashboard + name: component-log + - mountPath: /usr/share/filebeat/data + name: filebeat-data + - mountPath: /usr/share/filebeat/filebeat.yml + name: filebeat-conf + subPath: filebeat.yml + volumes: + - emptyDir: {} + name: component-log + - emptyDir: {} + name: filebeat-data + - configMap: + defaultMode: 420 + name: {{ include "common.fullname" . }}-filebeat-configmap + name: filebeat-conf + - emptyDir: {} + name: tls-info + imagePullSecrets: + - name: "{{ include "common.namespace" . }}-docker-registry-key" + diff --git a/kubernetes/dcaegen2/charts/dcae-dashboard/templates/service.yaml b/kubernetes/dcaegen2/charts/dcae-dashboard/templates/service.yaml new file mode 100644 index 0000000000..39f16bd6b1 --- /dev/null +++ b/kubernetes/dcaegen2/charts/dcae-dashboard/templates/service.yaml @@ -0,0 +1,43 @@ +#============LICENSE_START======================================================== +# ================================================================================ +# Copyright (c) 2019 AT&T Intellectual Property. All rights reserved. +# ================================================================================ +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +# ============LICENSE_END========================================================= + +apiVersion: v1 +kind: Service +metadata: + name: {{ include "common.servicename" . }} + namespace: {{ include "common.namespace" . }} + labels: + app: {{ include "common.name" . }} + chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} + release: {{ .Release.Name }} + heritage: {{ .Release.Service }} +spec: + type: {{ .Values.service.type }} + ports: + {{if eq .Values.service.type "NodePort" -}} + - port: {{ .Values.service.externalPort }} + nodePort: {{ .Values.global.nodePortPrefixExt | default .Values.nodePortPrefixExt }}{{ .Values.service.nodePort }} + name: {{ .Values.service.name }} + {{- else -}} + - port: {{ .Values.service.externalPort }} + targetPort: {{ .Values.service.internalPort }} + name: {{ .Values.service.name }} + {{- end}} + selector: + app: {{ include "common.name" . }} + release: {{ .Release.Name }} + diff --git a/kubernetes/dcaegen2/charts/dcae-dashboard/values.yaml b/kubernetes/dcaegen2/charts/dcae-dashboard/values.yaml new file mode 100644 index 0000000000..615afc42c2 --- /dev/null +++ b/kubernetes/dcaegen2/charts/dcae-dashboard/values.yaml @@ -0,0 +1,126 @@ +#============LICENSE_START======================================================== +# ================================================================================ +# Copyright (c) 2019 AT&T Intellectual Property. All rights reserved. +# ================================================================================ +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +# ============LICENSE_END========================================================= + +################################################################# +# Global configuration defaults. +################################################################# +global: + nodePortPrefixExt: 304 + readinessRepository: oomk8s + readinessImage: readiness-check:2.0.0 + loggingRepository: docker.elastic.co + loggingImage: beats/filebeat:5.5.0 + tlsRepository: nexus3.onap.org:10001 + tlsImage: onap/org.onap.dcaegen2.deployments.tls-init-container:1.0.3 + +config: + logstashServiceName: log-ls + logstashPort: 5044 + dhandler_url: https://deployment-handler:8443 + cfy_url: https://dcae-cloudify-manager/api/v3.1 + inventory_url: https://inventory:8080 + # Addresses of other ONAP entities + address: + consul: + host: consul-server + port: 8500 + +################################################################# +# Application configuration defaults. +################################################################# +# application image +repository: nexus3.onap.org:10001 +image: onap/org.onap.ccsdk.dashboard.ccsdk-app-os:1.1.0 +pullPolicy: Always + +# probe configuration parameters +liveness: + initialDelaySeconds: 10 + periodSeconds: 10 + # necessary to disable liveness probe when setting breakpoints + # in debugger so K8s doesn't restart unresponsive container + # liveness not desirable for Cloudify Manager container + enabled: false + +readiness: + initialDelaySeconds: 30 + periodSeconds: 30 + path: /ccsdk-app/health + scheme: HTTP + +service: + type: NodePort + name: dashboard + externalPort: 8080 + internalPort: 8080 + nodePort: 18 +# application configuration override for postgres +postgres: + nameOverride: dcae-dashboard-pg + service: + name: dcae-dashboard-postgres + name2: dcae-dashboard-pg-primary + name3: dcae-dashboard-pg-replica + container: + name: + primary: dcae-dashboard-pg-primary + replica: dcae-dashboard-pg-replica + config: + pgUserName: dashboard_pg_admin + pgDatabase: dashboard_pg_db_common + pgPrimaryPassword: onapdemodb + pgUserPassword: onapdemodb + pgRootPassword: onapdemodb + pgPort: "5432" + persistence: + mountSubPath: dcae-dashboard/data + mountInitPath: dcae-dashboard + pgpool: + nameOverride: dcae-dashboard-pgpool + service: + name: dcae-dashboard-pgpool + credentials: + pgusername: dcae_dashboard + pgpassword: onapdemodb + container: + name: + primary: dcae-dashboard-pgpool-primary + replica: dcae-dashboard-pgpool-replica + +# Resource Limit flavor -By Default using small +flavor: small +# Segregation for Different environment (Small and Large) +resources: + small: + limits: + cpu: 2 + memory: 2Gi + requests: + cpu: 1 + memory: 1Gi + large: + limits: + cpu: 4 + memory: 4Gi + requests: + cpu: 2 + memory: 2Gi + unlimited: {} +# Kubernetes namespace for components deployed via Cloudify manager +# If empty, use the common namespace +# dcae_ns: "dcae" + diff --git a/kubernetes/dcaegen2/charts/dcae-deployment-handler/resources/config/config.json b/kubernetes/dcaegen2/charts/dcae-deployment-handler/resources/config/config.json index 600f07c457..026355a909 100644 --- a/kubernetes/dcaegen2/charts/dcae-deployment-handler/resources/config/config.json +++ b/kubernetes/dcaegen2/charts/dcae-deployment-handler/resources/config/config.json @@ -1,8 +1,8 @@ { "cloudify": { - "protocol": "http" + "protocol": "https" }, "inventory": { - "protocol": "http" + "protocol": "https" } -} \ No newline at end of file +} diff --git a/kubernetes/dcaegen2/charts/dcae-deployment-handler/templates/deployment.yaml b/kubernetes/dcaegen2/charts/dcae-deployment-handler/templates/deployment.yaml index 3e4e53b679..a67197849f 100644 --- a/kubernetes/dcaegen2/charts/dcae-deployment-handler/templates/deployment.yaml +++ b/kubernetes/dcaegen2/charts/dcae-deployment-handler/templates/deployment.yaml @@ -72,7 +72,7 @@ spec: imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }} args: - --service - - "cloudify_manager|dcae-cloudify-manager.{{ include "common.namespace" . }}|80" + - "cloudify_manager|dcae-cloudify-manager.{{ include "common.namespace" . }}|443" - --service - "inventory|inventory.{{ include "common.namespace" . }}|8080" - --key @@ -119,6 +119,8 @@ spec: value: admin - name: CONFIG_BINDING_SERVICE value: config-binding-service + - name: NODE_EXTRA_CA_CERTS + value: /opt/app/dh/etc/cert/cacert.pem - name: POD_IP valueFrom: fieldRef: diff --git a/kubernetes/dcaegen2/charts/dcae-deployment-handler/values.yaml b/kubernetes/dcaegen2/charts/dcae-deployment-handler/values.yaml index 0eddf7c1a0..30893b6d7c 100644 --- a/kubernetes/dcaegen2/charts/dcae-deployment-handler/values.yaml +++ b/kubernetes/dcaegen2/charts/dcae-deployment-handler/values.yaml @@ -46,7 +46,7 @@ config: ################################################################# # application image repository: nexus3.onap.org:10001 -image: onap/org.onap.dcaegen2.platform.deployment-handler:4.0.1 +image: onap/org.onap.dcaegen2.platform.deployment-handler:4.2.0 pullPolicy: Always # probe configuration parameters diff --git a/kubernetes/dcaegen2/charts/dcae-healthcheck/values.yaml b/kubernetes/dcaegen2/charts/dcae-healthcheck/values.yaml index 913cb714d6..fb5a195e60 100644 --- a/kubernetes/dcaegen2/charts/dcae-healthcheck/values.yaml +++ b/kubernetes/dcaegen2/charts/dcae-healthcheck/values.yaml @@ -45,7 +45,7 @@ readiness: periodSeconds: 10 # application image repository: nexus3.onap.org:10001 -image: onap/org.onap.dcaegen2.deployments.healthcheck-container:1.2.4 +image: onap/org.onap.dcaegen2.deployments.healthcheck-container:1.2.5 # Resource Limit flavor -By Default using small flavor: small diff --git a/kubernetes/dcaegen2/charts/dcae-servicechange-handler/charts/dcae-inventory-api/resources/config/config.json b/kubernetes/dcaegen2/charts/dcae-servicechange-handler/charts/dcae-inventory-api/resources/config/config.json index a8329f674b..c8c7dd79f1 100644 --- a/kubernetes/dcaegen2/charts/dcae-servicechange-handler/charts/dcae-inventory-api/resources/config/config.json +++ b/kubernetes/dcaegen2/charts/dcae-servicechange-handler/charts/dcae-inventory-api/resources/config/config.json @@ -30,5 +30,14 @@ "gzipEnabledForRequests": false, "timeout": "5000milliseconds", "connectionTimeout": "5000milliseconds" + }, + "server": { + "applicationConnectors": [{ + "type": "https", + "port": 8080, + "keyStorePath": "/opt/cert/cert.jks", + "keyStorePassword": "hD:!w:CxF]lGvM6Mz9l^j[7U", + "keyStoreType": "JKS" + }] } - } \ No newline at end of file + } diff --git a/kubernetes/dcaegen2/charts/dcae-servicechange-handler/charts/dcae-inventory-api/templates/deployment.yaml b/kubernetes/dcaegen2/charts/dcae-servicechange-handler/charts/dcae-inventory-api/templates/deployment.yaml index e3e4aaf5cd..28eeae23a1 100644 --- a/kubernetes/dcaegen2/charts/dcae-servicechange-handler/charts/dcae-inventory-api/templates/deployment.yaml +++ b/kubernetes/dcaegen2/charts/dcae-servicechange-handler/charts/dcae-inventory-api/templates/deployment.yaml @@ -50,6 +50,19 @@ spec: fieldRef: apiVersion: v1 fieldPath: metadata.namespace + - name: init-tls + env: + - name: POD_IP + valueFrom: + fieldRef: + apiVersion: v1 + fieldPath: status.podIP + image: {{ .Values.global.tlsRepository }}/{{ .Values.global.tlsImage }} + imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }} + resources: {} + volumeMounts: + - mountPath: /opt/tls/shared + name: tls-info containers: - name: {{ include "common.name" . }} image: "{{ include "common.repository" . }}/{{ .Values.image }}" @@ -79,12 +92,15 @@ spec: httpGet: path: {{ .Values.readiness.path }} port: {{ .Values.service.internalPort }} + scheme: {{ .Values.readiness.scheme }} initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }} periodSeconds: {{ .Values.readiness.periodSeconds }} volumeMounts: - name: {{ include "common.fullname" . }}-inv-config mountPath: /opt/config.json subPath: config.json + - mountPath: /opt/cert/ + name: tls-info env: - name: CONSUL_HOST value: consul.{{ include "common.namespace" . }} @@ -92,5 +108,7 @@ spec: - name: {{ include "common.fullname" . }}-inv-config configMap: name: {{ include "common.fullname" . }}-configmap + - emptyDir: {} + name: tls-info imagePullSecrets: - name: "{{ include "common.namespace" . }}-docker-registry-key" diff --git a/kubernetes/dcaegen2/charts/dcae-servicechange-handler/charts/dcae-inventory-api/values.yaml b/kubernetes/dcaegen2/charts/dcae-servicechange-handler/charts/dcae-inventory-api/values.yaml index f12040210b..8e4430c37e 100644 --- a/kubernetes/dcaegen2/charts/dcae-servicechange-handler/charts/dcae-inventory-api/values.yaml +++ b/kubernetes/dcaegen2/charts/dcae-servicechange-handler/charts/dcae-inventory-api/values.yaml @@ -24,6 +24,8 @@ global: readinessImage: readiness-check:2.0.0 loggingRepository: docker.elastic.co loggingImage: beats/filebeat:5.5.0 + tlsRepository: nexus3.onap.org:10001 + tlsImage: onap/org.onap.dcaegen2.deployments.tls-init-container:1.0.3 repositoryCred: user: docker password: docker @@ -42,7 +44,7 @@ config: ################################################################# # application image repository: nexus3.onap.org:10001 -image: onap/org.onap.dcaegen2.platform.inventory-api:3.2.0 +image: onap/org.onap.dcaegen2.platform.inventory-api:3.4.0 pullPolicy: Always @@ -59,6 +61,7 @@ readiness: initialDelaySeconds: 30 periodSeconds: 30 path: /dcae-service-types + scheme: HTTPS service: type: ClusterIP diff --git a/kubernetes/dcaegen2/charts/dcae-servicechange-handler/resources/config/config.json b/kubernetes/dcaegen2/charts/dcae-servicechange-handler/resources/config/config.json index 7ddc800817..4578d4c4ee 100644 --- a/kubernetes/dcaegen2/charts/dcae-servicechange-handler/resources/config/config.json +++ b/kubernetes/dcaegen2/charts/dcae-servicechange-handler/resources/config/config.json @@ -17,6 +17,6 @@ "isFilterInEmptyResources": false }, "dcaeInventoryClient": { - "uri": "http://inventory:8080" + "uri": "https://inventory:8080" } } diff --git a/kubernetes/dcaegen2/charts/dcae-servicechange-handler/templates/deployment.yaml b/kubernetes/dcaegen2/charts/dcae-servicechange-handler/templates/deployment.yaml index 44ebc42412..d948d3425b 100644 --- a/kubernetes/dcaegen2/charts/dcae-servicechange-handler/templates/deployment.yaml +++ b/kubernetes/dcaegen2/charts/dcae-servicechange-handler/templates/deployment.yaml @@ -54,16 +54,23 @@ spec: fieldRef: apiVersion: v1 fieldPath: metadata.namespace + - name: init-tls + env: + - name: POD_IP + valueFrom: + fieldRef: + apiVersion: v1 + fieldPath: status.podIP + image: {{ .Values.global.tlsRepository }}/{{ .Values.global.tlsImage }} + imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }} + resources: {} + volumeMounts: + - mountPath: /opt/tls/shared + name: tls-info containers: - name: {{ include "common.name" . }} image: "{{ include "common.repository" . }}/{{ .Values.image }}" imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }} - command: ["java"] - args: - - "-jar" - - "/opt/servicechange-handler.jar" - - "prod" - - "/opt/config.json" resources: {{ include "common.resources" . | indent 12 }} # disable liveness probe when breakpoints set in debugger @@ -84,12 +91,21 @@ spec: - name: {{ include "common.fullname" . }}-sch-config mountPath: /opt/config.json subPath: config.json + # NOTE: This is tied to the PATH_TO_CACERT env variable + - mountPath: /opt/cert/ + name: tls-info env: - name: CONSUL_HOST value: consul.{{ include "common.namespace" . }} + - name: PATH_TO_CACERT + value: "/opt/cert/cacert.pem" + - name: SCH_ARGS + value: "prod /opt/config.json" volumes: - name: {{ include "common.fullname" . }}-sch-config configMap: name: {{ include "common.fullname" . }}-configmap + - emptyDir: {} + name: tls-info imagePullSecrets: - name: "{{ include "common.namespace" . }}-docker-registry-key" diff --git a/kubernetes/dcaegen2/charts/dcae-servicechange-handler/values.yaml b/kubernetes/dcaegen2/charts/dcae-servicechange-handler/values.yaml index dd985163c1..0b88a65c69 100644 --- a/kubernetes/dcaegen2/charts/dcae-servicechange-handler/values.yaml +++ b/kubernetes/dcaegen2/charts/dcae-servicechange-handler/values.yaml @@ -24,6 +24,8 @@ global: readinessImage: readiness-check:2.0.0 loggingRepository: docker.elastic.co loggingImage: beats/filebeat:5.5.0 + tlsRepository: nexus3.onap.org:10001 + tlsImage: onap/org.onap.dcaegen2.deployments.tls-init-container:1.0.3 repositoryCred: user: docker password: docker @@ -40,7 +42,7 @@ config: ################################################################# # application image repository: nexus3.onap.org:10001 -image: onap/org.onap.dcaegen2.platform.servicechange-handler:1.1.5 +image: onap/org.onap.dcaegen2.platform.servicechange-handler:1.3.2 pullPolicy: Always -- cgit 1.2.3-korg