From 5fb3bc61975c258359d3b0c4f450d2d0e3a7bbed Mon Sep 17 00:00:00 2001 From: GregSulek Date: Thu, 20 Sep 2018 08:51:37 -0400 Subject: Add Resource Limits for vfc resolving merge conflict and aligning with resource template bumping up small/large limits so pods actually run Issue-ID: OOM-1166 Change-Id: Ied1a88f99f288544272e106677bba3f3131e48cb Signed-off-by: GregSulek Signed-off-by: Mandeep Khinda --- kubernetes/vfc/charts/vfc-catalog/values.yaml | 37 ++++++++++---------- kubernetes/vfc/charts/vfc-db/values.yaml | 39 +++++++++++----------- kubernetes/vfc/charts/vfc-ems-driver/values.yaml | 37 ++++++++++---------- .../vfc/charts/vfc-generic-vnfm-driver/values.yaml | 37 ++++++++++---------- .../vfc/charts/vfc-huawei-vnfm-driver/values.yaml | 37 ++++++++++---------- .../vfc/charts/vfc-juju-vnfm-driver/values.yaml | 38 +++++++++++---------- .../vfc/charts/vfc-multivim-proxy/values.yaml | 37 ++++++++++---------- .../vfc/charts/vfc-nokia-v2vnfm-driver/values.yaml | 37 ++++++++++---------- .../vfc/charts/vfc-nokia-vnfm-driver/values.yaml | 37 ++++++++++---------- kubernetes/vfc/charts/vfc-nslcm/values.yaml | 38 +++++++++++---------- kubernetes/vfc/charts/vfc-resmgr/values.yaml | 38 +++++++++++---------- kubernetes/vfc/charts/vfc-vnflcm/values.yaml | 38 +++++++++++---------- kubernetes/vfc/charts/vfc-vnfmgr/values.yaml | 37 ++++++++++---------- kubernetes/vfc/charts/vfc-vnfres/values.yaml | 38 +++++++++++---------- .../vfc/charts/vfc-workflow-engine/values.yaml | 37 ++++++++++---------- kubernetes/vfc/charts/vfc-workflow/values.yaml | 38 +++++++++++---------- .../vfc/charts/vfc-zte-sdnc-driver/values.yaml | 38 +++++++++++---------- .../vfc/charts/vfc-zte-vnfm-driver/values.yaml | 38 +++++++++++---------- 18 files changed, 351 insertions(+), 325 deletions(-) (limited to 'kubernetes') diff --git a/kubernetes/vfc/charts/vfc-catalog/values.yaml b/kubernetes/vfc/charts/vfc-catalog/values.yaml index 8ecd40bcca..8b0561e558 100644 --- a/kubernetes/vfc/charts/vfc-catalog/values.yaml +++ b/kubernetes/vfc/charts/vfc-catalog/values.yaml @@ -26,6 +26,8 @@ global: # Application configuration defaults. ################################################################# # application image +flavor: small + repository: nexus3.onap.org:10001 image: onap/vfc/catalog:1.1.0 pullPolicy: Always @@ -69,21 +71,20 @@ service: ingress: enabled: false -resources: {} - # We usually recommend not to specify default resources and to leave this as a conscious - # choice for the user. This also increases chances charts run on environments with little - # resources, such as Minikube. If you do want to specify resources, uncomment the following - # lines, adjust them as necessary, and remove the curly braces after 'resources:'. - # - # Example: - # Configure resource requests and limits - # ref: http://kubernetes.io/docs/user-guide/compute-resources/ - # Minimum memory for development is 2 CPU cores and 4GB memory - # Minimum memory for production is 4 CPU cores and 8GB memory -#resources: -# limits: -# cpu: 2 -# memory: 4Gi -# requests: -# cpu: 2 -# memory: 4Gi +# Configure resource requests and limits +resources: + small: + limits: + cpu: 200m + memory: 500Mi + requests: + cpu: 100m + memory: 250Mi + large: + limits: + cpu: 400m + memory: 1000Mi + requests: + cpu: 200m + memory: 500Mi + unlimited: {} \ No newline at end of file diff --git a/kubernetes/vfc/charts/vfc-db/values.yaml b/kubernetes/vfc/charts/vfc-db/values.yaml index 776a2816c9..83071e606e 100644 --- a/kubernetes/vfc/charts/vfc-db/values.yaml +++ b/kubernetes/vfc/charts/vfc-db/values.yaml @@ -26,8 +26,10 @@ global: # Application configuration defaults. ################################################################# # application image +flavor: small + repository: nexus3.onap.org:10001 -image: onap/vfc/db:1.1.0-STAGING-latest +image: onap/vfc/db:latest pullPolicy: Always # flag to enable debugging - application support required @@ -67,21 +69,20 @@ service: ingress: enabled: false -resources: {} - # We usually recommend not to specify default resources and to leave this as a conscious - # choice for the user. This also increases chances charts run on environments with little - # resources, such as Minikube. If you do want to specify resources, uncomment the following - # lines, adjust them as necessary, and remove the curly braces after 'resources:'. - # - # Example: - # Configure resource requests and limits - # ref: http://kubernetes.io/docs/user-guide/compute-resources/ - # Minimum memory for development is 2 CPU cores and 4GB memory - # Minimum memory for production is 4 CPU cores and 8GB memory -#resources: -# limits: -# cpu: 2 -# memory: 4Gi -# requests: -# cpu: 2 -# memory: 4Gi +# Configure resource requests and limits +resources: + small: + limits: + cpu: 200m + memory: 500Mi + requests: + cpu: 100m + memory: 250Mi + large: + limits: + cpu: 400m + memory: 1000Mi + requests: + cpu: 200m + memory: 500Mi + unlimited: {} \ No newline at end of file diff --git a/kubernetes/vfc/charts/vfc-ems-driver/values.yaml b/kubernetes/vfc/charts/vfc-ems-driver/values.yaml index 1bd86010ea..2263bff214 100644 --- a/kubernetes/vfc/charts/vfc-ems-driver/values.yaml +++ b/kubernetes/vfc/charts/vfc-ems-driver/values.yaml @@ -26,6 +26,8 @@ global: # Application configuration defaults. ################################################################# # application image +flavor: small + repository: nexus3.onap.org:10001 image: onap/vfc/emsdriver:1.1.0 pullPolicy: Always @@ -73,21 +75,20 @@ service: ingress: enabled: false -resources: {} - # We usually recommend not to specify default resources and to leave this as a conscious - # choice for the user. This also increases chances charts run on environments with little - # resources, such as Minikube. If you do want to specify resources, uncomment the following - # lines, adjust them as necessary, and remove the curly braces after 'resources:'. - # - # Example: - # Configure resource requests and limits - # ref: http://kubernetes.io/docs/user-guide/compute-resources/ - # Minimum memory for development is 2 CPU cores and 4GB memory - # Minimum memory for production is 4 CPU cores and 8GB memory -#resources: -# limits: -# cpu: 2 -# memory: 4Gi -# requests: -# cpu: 2 -# memory: 4Gi +# Configure resource requests and limits +resources: + small: + limits: + cpu: 200m + memory: 500Mi + requests: + cpu: 100m + memory: 250Mi + large: + limits: + cpu: 400m + memory: 1000Mi + requests: + cpu: 200m + memory: 500Mi + unlimited: {} \ No newline at end of file diff --git a/kubernetes/vfc/charts/vfc-generic-vnfm-driver/values.yaml b/kubernetes/vfc/charts/vfc-generic-vnfm-driver/values.yaml index a90c3e835c..6d2e283b24 100644 --- a/kubernetes/vfc/charts/vfc-generic-vnfm-driver/values.yaml +++ b/kubernetes/vfc/charts/vfc-generic-vnfm-driver/values.yaml @@ -26,6 +26,8 @@ global: # Application configuration defaults. ################################################################# # application image +flavor: small + repository: nexus3.onap.org:10001 image: onap/vfc/gvnfmdriver:1.1.0 pullPolicy: Always @@ -69,21 +71,20 @@ service: ingress: enabled: false -resources: {} - # We usually recommend not to specify default resources and to leave this as a conscious - # choice for the user. This also increases chances charts run on environments with little - # resources, such as Minikube. If you do want to specify resources, uncomment the following - # lines, adjust them as necessary, and remove the curly braces after 'resources:'. - # - # Example: - # Configure resource requests and limits - # ref: http://kubernetes.io/docs/user-guide/compute-resources/ - # Minimum memory for development is 2 CPU cores and 4GB memory - # Minimum memory for production is 4 CPU cores and 8GB memory -#resources: -# limits: -# cpu: 2 -# memory: 4Gi -# requests: -# cpu: 2 -# memory: 4Gi +# Configure resource requests and limits +resources: + small: + limits: + cpu: 200m + memory: 500Mi + requests: + cpu: 100m + memory: 250Mi + large: + limits: + cpu: 400m + memory: 1000Mi + requests: + cpu: 200m + memory: 500Mi + unlimited: {} \ No newline at end of file diff --git a/kubernetes/vfc/charts/vfc-huawei-vnfm-driver/values.yaml b/kubernetes/vfc/charts/vfc-huawei-vnfm-driver/values.yaml index 75a667c214..9c2c8bbbd3 100644 --- a/kubernetes/vfc/charts/vfc-huawei-vnfm-driver/values.yaml +++ b/kubernetes/vfc/charts/vfc-huawei-vnfm-driver/values.yaml @@ -26,6 +26,8 @@ global: # Application configuration defaults. ################################################################# # application image +flavor: small + repository: nexus3.onap.org:10001 image: onap/vfc/nfvo/svnfm/huawei:1.1.0 pullPolicy: Always @@ -71,21 +73,20 @@ service: ingress: enabled: false -resources: {} - # We usually recommend not to specify default resources and to leave this as a conscious - # choice for the user. This also increases chances charts run on environments with little - # resources, such as Minikube. If you do want to specify resources, uncomment the following - # lines, adjust them as necessary, and remove the curly braces after 'resources:'. - # - # Example: - # Configure resource requests and limits - # ref: http://kubernetes.io/docs/user-guide/compute-resources/ - # Minimum memory for development is 2 CPU cores and 4GB memory - # Minimum memory for production is 4 CPU cores and 8GB memory -#resources: -# limits: -# cpu: 2 -# memory: 4Gi -# requests: -# cpu: 2 -# memory: 4Gi +# Configure resource requests and limits +resources: + small: + limits: + cpu: 200m + memory: 2000Mi + requests: + cpu: 100m + memory: 1000Mi + large: + limits: + cpu: 400m + memory: 4000Mi + requests: + cpu: 200m + memory: 2000Mi + unlimited: {} \ No newline at end of file diff --git a/kubernetes/vfc/charts/vfc-juju-vnfm-driver/values.yaml b/kubernetes/vfc/charts/vfc-juju-vnfm-driver/values.yaml index aa6d5aaf27..cbdf9a513b 100644 --- a/kubernetes/vfc/charts/vfc-juju-vnfm-driver/values.yaml +++ b/kubernetes/vfc/charts/vfc-juju-vnfm-driver/values.yaml @@ -26,6 +26,8 @@ global: # Application configuration defaults. ################################################################# # application image +flavor: small + repository: nexus3.onap.org:10001 image: onap/vfc/jujudriver:1.1.0 pullPolicy: Always @@ -69,21 +71,21 @@ service: ingress: enabled: false -resources: {} - # We usually recommend not to specify default resources and to leave this as a conscious - # choice for the user. This also increases chances charts run on environments with little - # resources, such as Minikube. If you do want to specify resources, uncomment the following - # lines, adjust them as necessary, and remove the curly braces after 'resources:'. - # - # Example: - # Configure resource requests and limits - # ref: http://kubernetes.io/docs/user-guide/compute-resources/ - # Minimum memory for development is 2 CPU cores and 4GB memory - # Minimum memory for production is 4 CPU cores and 8GB memory -#resources: -# limits: -# cpu: 2 -# memory: 4Gi -# requests: -# cpu: 2 -# memory: 4Gi + +# Configure resource requests and limits +resources: + small: + limits: + cpu: 200m + memory: 2000Mi + requests: + cpu: 100m + memory: 1000Mi + large: + limits: + cpu: 400m + memory: 4000Mi + requests: + cpu: 200m + memory: 2000Mi + unlimited: {} \ No newline at end of file diff --git a/kubernetes/vfc/charts/vfc-multivim-proxy/values.yaml b/kubernetes/vfc/charts/vfc-multivim-proxy/values.yaml index b58ac1908b..00fd3b8b50 100644 --- a/kubernetes/vfc/charts/vfc-multivim-proxy/values.yaml +++ b/kubernetes/vfc/charts/vfc-multivim-proxy/values.yaml @@ -26,6 +26,8 @@ global: # Application configuration defaults. ################################################################# # application image +flavor: small + repository: nexus3.onap.org:10001 image: onap/vfc/multivimproxy:1.0.0 pullPolicy: Always @@ -68,21 +70,20 @@ service: ingress: enabled: false -resources: {} - # We usually recommend not to specify default resources and to leave this as a conscious - # choice for the user. This also increases chances charts run on environments with little - # resources, such as Minikube. If you do want to specify resources, uncomment the following - # lines, adjust them as necessary, and remove the curly braces after 'resources:'. - # - # Example: - # Configure resource requests and limits - # ref: http://kubernetes.io/docs/user-guide/compute-resources/ - # Minimum memory for development is 2 CPU cores and 4GB memory - # Minimum memory for production is 4 CPU cores and 8GB memory -#resources: -# limits: -# cpu: 2 -# memory: 4Gi -# requests: -# cpu: 2 -# memory: 4Gi +# Configure resource requests and limits +resources: + small: + limits: + cpu: 200m + memory: 500Mi + requests: + cpu: 100m + memory: 250Mi + large: + limits: + cpu: 400m + memory: 1000Mi + requests: + cpu: 200m + memory: 500Mi + unlimited: {} \ No newline at end of file diff --git a/kubernetes/vfc/charts/vfc-nokia-v2vnfm-driver/values.yaml b/kubernetes/vfc/charts/vfc-nokia-v2vnfm-driver/values.yaml index 912e80ff03..23fd17bcd8 100644 --- a/kubernetes/vfc/charts/vfc-nokia-v2vnfm-driver/values.yaml +++ b/kubernetes/vfc/charts/vfc-nokia-v2vnfm-driver/values.yaml @@ -26,6 +26,8 @@ global: # Application configuration defaults. ################################################################# # application image +flavor: small + repository: nexus3.onap.org:10001 image: onap/vfc/nfvo/svnfm/nokiav2:1.1.0 pullPolicy: Always @@ -70,21 +72,20 @@ service: ingress: enabled: false -resources: {} - # We usually recommend not to specify default resources and to leave this as a conscious - # choice for the user. This also increases chances charts run on environments with little - # resources, such as Minikube. If you do want to specify resources, uncomment the following - # lines, adjust them as necessary, and remove the curly braces after 'resources:'. - # - # Example: - # Configure resource requests and limits - # ref: http://kubernetes.io/docs/user-guide/compute-resources/ - # Minimum memory for development is 2 CPU cores and 4GB memory - # Minimum memory for production is 4 CPU cores and 8GB memory -#resources: -# limits: -# cpu: 2 -# memory: 4Gi -# requests: -# cpu: 2 -# memory: 4Gi +# Configure resource requests and limits +resources: + small: + limits: + cpu: 200m + memory: 5000Mi + requests: + cpu: 100m + memory: 3000Mi + large: + limits: + cpu: 400m + memory: 7000Mi + requests: + cpu: 200m + memory: 5000Mi + unlimited: {} \ No newline at end of file diff --git a/kubernetes/vfc/charts/vfc-nokia-vnfm-driver/values.yaml b/kubernetes/vfc/charts/vfc-nokia-vnfm-driver/values.yaml index 90daf51dcd..23489536e4 100644 --- a/kubernetes/vfc/charts/vfc-nokia-vnfm-driver/values.yaml +++ b/kubernetes/vfc/charts/vfc-nokia-vnfm-driver/values.yaml @@ -26,6 +26,8 @@ global: # Application configuration defaults. ################################################################# # application image +flavor: small + repository: nexus3.onap.org:10001 image: onap/vfc/nfvo/svnfm/nokia:1.1.0 pullPolicy: Always @@ -69,21 +71,20 @@ service: ingress: enabled: false -resources: {} - # We usually recommend not to specify default resources and to leave this as a conscious - # choice for the user. This also increases chances charts run on environments with little - # resources, such as Minikube. If you do want to specify resources, uncomment the following - # lines, adjust them as necessary, and remove the curly braces after 'resources:'. - # - # Example: - # Configure resource requests and limits - # ref: http://kubernetes.io/docs/user-guide/compute-resources/ - # Minimum memory for development is 2 CPU cores and 4GB memory - # Minimum memory for production is 4 CPU cores and 8GB memory -#resources: -# limits: -# cpu: 2 -# memory: 4Gi -# requests: -# cpu: 2 -# memory: 4Gi +# Configure resource requests and limits +resources: + small: + limits: + cpu: 200m + memory: 2000Mi + requests: + cpu: 100m + memory: 1000Mi + large: + limits: + cpu: 400m + memory: 4000Mi + requests: + cpu: 200m + memory: 2000Mi + unlimited: {} \ No newline at end of file diff --git a/kubernetes/vfc/charts/vfc-nslcm/values.yaml b/kubernetes/vfc/charts/vfc-nslcm/values.yaml index c3f6e9d0e8..7a9c8bd512 100644 --- a/kubernetes/vfc/charts/vfc-nslcm/values.yaml +++ b/kubernetes/vfc/charts/vfc-nslcm/values.yaml @@ -26,6 +26,8 @@ global: # Application configuration defaults. ################################################################# # application image +flavor: small + repository: nexus3.onap.org:10001 image: onap/vfc/nslcm:1.1.0 pullPolicy: Always @@ -69,21 +71,21 @@ service: ingress: enabled: false -resources: {} - # We usually recommend not to specify default resources and to leave this as a conscious - # choice for the user. This also increases chances charts run on environments with little - # resources, such as Minikube. If you do want to specify resources, uncomment the following - # lines, adjust them as necessary, and remove the curly braces after 'resources:'. - # - # Example: - # Configure resource requests and limits - # ref: http://kubernetes.io/docs/user-guide/compute-resources/ - # Minimum memory for development is 2 CPU cores and 4GB memory - # Minimum memory for production is 4 CPU cores and 8GB memory -#resources: -# limits: -# cpu: 2 -# memory: 4Gi -# requests: -# cpu: 2 -# memory: 4Gi + +# Configure resource requests and limits +resources: + small: + limits: + cpu: 200m + memory: 500Mi + requests: + cpu: 100m + memory: 250Mi + large: + limits: + cpu: 400m + memory: 1000Mi + requests: + cpu: 200m + memory: 500Mi + unlimited: {} \ No newline at end of file diff --git a/kubernetes/vfc/charts/vfc-resmgr/values.yaml b/kubernetes/vfc/charts/vfc-resmgr/values.yaml index 20f4ecdea9..36b778b5f6 100644 --- a/kubernetes/vfc/charts/vfc-resmgr/values.yaml +++ b/kubernetes/vfc/charts/vfc-resmgr/values.yaml @@ -26,6 +26,8 @@ global: # Application configuration defaults. ################################################################# # application image +flavor: small + repository: nexus3.onap.org:10001 image: onap/vfc/resmanagement:1.1.0 pullPolicy: Always @@ -69,21 +71,21 @@ service: ingress: enabled: false -resources: {} - # We usually recommend not to specify default resources and to leave this as a conscious - # choice for the user. This also increases chances charts run on environments with little - # resources, such as Minikube. If you do want to specify resources, uncomment the following - # lines, adjust them as necessary, and remove the curly braces after 'resources:'. - # - # Example: - # Configure resource requests and limits - # ref: http://kubernetes.io/docs/user-guide/compute-resources/ - # Minimum memory for development is 2 CPU cores and 4GB memory - # Minimum memory for production is 4 CPU cores and 8GB memory -#resources: -# limits: -# cpu: 2 -# memory: 4Gi -# requests: -# cpu: 2 -# memory: 4Gi + +# Configure resource requests and limits +resources: + small: + limits: + cpu: 200m + memory: 2000Mi + requests: + cpu: 100m + memory: 1000Mi + large: + limits: + cpu: 400m + memory: 4000Mi + requests: + cpu: 200m + memory: 2000Mi + unlimited: {} \ No newline at end of file diff --git a/kubernetes/vfc/charts/vfc-vnflcm/values.yaml b/kubernetes/vfc/charts/vfc-vnflcm/values.yaml index 8992679c24..13f3e2fdc9 100644 --- a/kubernetes/vfc/charts/vfc-vnflcm/values.yaml +++ b/kubernetes/vfc/charts/vfc-vnflcm/values.yaml @@ -26,6 +26,8 @@ global: # Application configuration defaults. ################################################################# # application image +flavor: small + repository: nexus3.onap.org:10001 image: onap/vfc/vnflcm:1.1.0 pullPolicy: Always @@ -69,21 +71,21 @@ service: ingress: enabled: false -resources: {} - # We usually recommend not to specify default resources and to leave this as a conscious - # choice for the user. This also increases chances charts run on environments with little - # resources, such as Minikube. If you do want to specify resources, uncomment the following - # lines, adjust them as necessary, and remove the curly braces after 'resources:'. - # - # Example: - # Configure resource requests and limits - # ref: http://kubernetes.io/docs/user-guide/compute-resources/ - # Minimum memory for development is 2 CPU cores and 4GB memory - # Minimum memory for production is 4 CPU cores and 8GB memory -#resources: -# limits: -# cpu: 2 -# memory: 4Gi -# requests: -# cpu: 2 -# memory: 4Gi + +# Configure resource requests and limits +resources: + small: + limits: + cpu: 200m + memory: 500Mi + requests: + cpu: 100m + memory: 250Mi + large: + limits: + cpu: 400m + memory: 1000Mi + requests: + cpu: 200m + memory: 500Mi + unlimited: {} \ No newline at end of file diff --git a/kubernetes/vfc/charts/vfc-vnfmgr/values.yaml b/kubernetes/vfc/charts/vfc-vnfmgr/values.yaml index f828d52893..4625127ab5 100644 --- a/kubernetes/vfc/charts/vfc-vnfmgr/values.yaml +++ b/kubernetes/vfc/charts/vfc-vnfmgr/values.yaml @@ -26,6 +26,8 @@ global: # Application configuration defaults. ################################################################# # application image +flavor: small + repository: nexus3.onap.org:10001 image: onap/vfc/vnfmgr:1.1.0 pullPolicy: Always @@ -69,21 +71,20 @@ service: ingress: enabled: false -resources: {} - # We usually recommend not to specify default resources and to leave this as a conscious - # choice for the user. This also increases chances charts run on environments with little - # resources, such as Minikube. If you do want to specify resources, uncomment the following - # lines, adjust them as necessary, and remove the curly braces after 'resources:'. - # - # Example: - # Configure resource requests and limits - # ref: http://kubernetes.io/docs/user-guide/compute-resources/ - # Minimum memory for development is 2 CPU cores and 4GB memory - # Minimum memory for production is 4 CPU cores and 8GB memory -#resources: -# limits: -# cpu: 2 -# memory: 4Gi -# requests: -# cpu: 2 -# memory: 4Gi +# Configure resource requests and limits +resources: + small: + limits: + cpu: 200m + memory: 500Mi + requests: + cpu: 100m + memory: 250Mi + large: + limits: + cpu: 400m + memory: 1000Mi + requests: + cpu: 200m + memory: 500Mi + unlimited: {} \ No newline at end of file diff --git a/kubernetes/vfc/charts/vfc-vnfres/values.yaml b/kubernetes/vfc/charts/vfc-vnfres/values.yaml index 5e70487df2..005b8a5863 100644 --- a/kubernetes/vfc/charts/vfc-vnfres/values.yaml +++ b/kubernetes/vfc/charts/vfc-vnfres/values.yaml @@ -26,6 +26,8 @@ global: # Application configuration defaults. ################################################################# # application image +flavor: small + repository: nexus3.onap.org:10001 image: onap/vfc/vnfres:1.1.0 pullPolicy: Always @@ -69,21 +71,21 @@ service: ingress: enabled: false -resources: {} - # We usually recommend not to specify default resources and to leave this as a conscious - # choice for the user. This also increases chances charts run on environments with little - # resources, such as Minikube. If you do want to specify resources, uncomment the following - # lines, adjust them as necessary, and remove the curly braces after 'resources:'. - # - # Example: - # Configure resource requests and limits - # ref: http://kubernetes.io/docs/user-guide/compute-resources/ - # Minimum memory for development is 2 CPU cores and 4GB memory - # Minimum memory for production is 4 CPU cores and 8GB memory -#resources: -# limits: -# cpu: 2 -# memory: 4Gi -# requests: -# cpu: 2 -# memory: 4Gi + +# Configure resource requests and limits +resources: + small: + limits: + cpu: 200m + memory: 500Mi + requests: + cpu: 100m + memory: 250Mi + large: + limits: + cpu: 400m + memory: 1000Mi + requests: + cpu: 200m + memory: 500Mi + unlimited: {} \ No newline at end of file diff --git a/kubernetes/vfc/charts/vfc-workflow-engine/values.yaml b/kubernetes/vfc/charts/vfc-workflow-engine/values.yaml index fae22c67c5..2a486da1e2 100644 --- a/kubernetes/vfc/charts/vfc-workflow-engine/values.yaml +++ b/kubernetes/vfc/charts/vfc-workflow-engine/values.yaml @@ -26,6 +26,8 @@ global: # Application configuration defaults. ################################################################# # application image +flavor: small + repository: nexus3.onap.org:10001 image: onap/vfc/wfengine-activiti:1.1.0 pullPolicy: Always @@ -69,21 +71,20 @@ service: ingress: enabled: false -resources: {} - # We usually recommend not to specify default resources and to leave this as a conscious - # choice for the user. This also increases chances charts run on environments with little - # resources, such as Minikube. If you do want to specify resources, uncomment the following - # lines, adjust them as necessary, and remove the curly braces after 'resources:'. - # - # Example: - # Configure resource requests and limits - # ref: http://kubernetes.io/docs/user-guide/compute-resources/ - # Minimum memory for development is 2 CPU cores and 4GB memory - # Minimum memory for production is 4 CPU cores and 8GB memory -#resources: -# limits: -# cpu: 2 -# memory: 4Gi -# requests: -# cpu: 2 -# memory: 4Gi +# Configure resource requests and limits +resources: + small: + limits: + cpu: 200m + memory: 2000Mi + requests: + cpu: 100m + memory: 1000Mi + large: + limits: + cpu: 400m + memory: 4000Mi + requests: + cpu: 200m + memory: 2000Mi + unlimited: {} \ No newline at end of file diff --git a/kubernetes/vfc/charts/vfc-workflow/values.yaml b/kubernetes/vfc/charts/vfc-workflow/values.yaml index 4be7845aa3..050e58fafe 100644 --- a/kubernetes/vfc/charts/vfc-workflow/values.yaml +++ b/kubernetes/vfc/charts/vfc-workflow/values.yaml @@ -26,6 +26,8 @@ global: # Application configuration defaults. ################################################################# # application image +flavor: small + repository: nexus3.onap.org:10001 image: onap/vfc/wfengine-mgrservice:1.1.0 pullPolicy: Always @@ -69,21 +71,21 @@ service: ingress: enabled: false -resources: {} - # We usually recommend not to specify default resources and to leave this as a conscious - # choice for the user. This also increases chances charts run on environments with little - # resources, such as Minikube. If you do want to specify resources, uncomment the following - # lines, adjust them as necessary, and remove the curly braces after 'resources:'. - # - # Example: - # Configure resource requests and limits - # ref: http://kubernetes.io/docs/user-guide/compute-resources/ - # Minimum memory for development is 2 CPU cores and 4GB memory - # Minimum memory for production is 4 CPU cores and 8GB memory -#resources: -# limits: -# cpu: 2 -# memory: 4Gi -# requests: -# cpu: 2 -# memory: 4Gi + +# Configure resource requests and limits +resources: + small: + limits: + cpu: 200m + memory: 500Mi + requests: + cpu: 100m + memory: 250Mi + large: + limits: + cpu: 400m + memory: 1000Mi + requests: + cpu: 200m + memory: 500Mi + unlimited: {} \ No newline at end of file diff --git a/kubernetes/vfc/charts/vfc-zte-sdnc-driver/values.yaml b/kubernetes/vfc/charts/vfc-zte-sdnc-driver/values.yaml index 3ea6f8d77d..4c9dbaab10 100644 --- a/kubernetes/vfc/charts/vfc-zte-sdnc-driver/values.yaml +++ b/kubernetes/vfc/charts/vfc-zte-sdnc-driver/values.yaml @@ -26,6 +26,8 @@ global: # Application configuration defaults. ################################################################# # application image +flavor: small + repository: nexus3.onap.org:10001 image: onap/vfc/ztesdncdriver:1.1.0 pullPolicy: Always @@ -69,21 +71,21 @@ service: ingress: enabled: false -resources: {} - # We usually recommend not to specify default resources and to leave this as a conscious - # choice for the user. This also increases chances charts run on environments with little - # resources, such as Minikube. If you do want to specify resources, uncomment the following - # lines, adjust them as necessary, and remove the curly braces after 'resources:'. - # - # Example: - # Configure resource requests and limits - # ref: http://kubernetes.io/docs/user-guide/compute-resources/ - # Minimum memory for development is 2 CPU cores and 4GB memory - # Minimum memory for production is 4 CPU cores and 8GB memory -#resources: -# limits: -# cpu: 2 -# memory: 4Gi -# requests: -# cpu: 2 -# memory: 4Gi + +# Configure resource requests and limits +resources: + small: + limits: + cpu: 200m + memory: 500Mi + requests: + cpu: 100m + memory: 250Mi + large: + limits: + cpu: 400m + memory: 1000Mi + requests: + cpu: 200m + memory: 500Mi + unlimited: {} \ No newline at end of file diff --git a/kubernetes/vfc/charts/vfc-zte-vnfm-driver/values.yaml b/kubernetes/vfc/charts/vfc-zte-vnfm-driver/values.yaml index e0e47882a5..288d86fa45 100644 --- a/kubernetes/vfc/charts/vfc-zte-vnfm-driver/values.yaml +++ b/kubernetes/vfc/charts/vfc-zte-vnfm-driver/values.yaml @@ -26,6 +26,8 @@ global: # Application configuration defaults. ################################################################# # application image +flavor: small + repository: nexus3.onap.org:10001 image: onap/vfc/ztevnfmdriver:1.1.0 pullPolicy: Always @@ -68,21 +70,21 @@ service: ingress: enabled: false -resources: {} - # We usually recommend not to specify default resources and to leave this as a conscious - # choice for the user. This also increases chances charts run on environments with little - # resources, such as Minikube. If you do want to specify resources, uncomment the following - # lines, adjust them as necessary, and remove the curly braces after 'resources:'. - # - # Example: - # Configure resource requests and limits - # ref: http://kubernetes.io/docs/user-guide/compute-resources/ - # Minimum memory for development is 2 CPU cores and 4GB memory - # Minimum memory for production is 4 CPU cores and 8GB memory -#resources: -# limits: -# cpu: 2 -# memory: 4Gi -# requests: -# cpu: 2 -# memory: 4Gi + +# Configure resource requests and limits +resources: + small: + limits: + cpu: 100m + memory: 500Mi + requests: + cpu: 50m + memory: 250Mi + large: + limits: + cpu: 200m + memory: 1000Mi + requests: + cpu: 100m + memory: 500Mi + unlimited: {} \ No newline at end of file -- cgit 1.2.3-korg