From c2cc5ff1d2520267f9ebabb02eced6ea2a1dc9f6 Mon Sep 17 00:00:00 2001 From: jasmineWen Date: Fri, 22 Jun 2018 18:16:24 +0000 Subject: vvp -- VNF Validation Platform Issue-ID: OOM-1173 Change-Id: I11251d5729c057ebc2211c60ac973343c0aa01f3 Signed-off-by: jasmineWen Signed-off-by: stark, steven --- .../vvp-cms-uwsgi/resources/config/cms/__init__.py | 395 +++++++++++++++++++++ .../resources/config/cms/gunicorn.ini | 20 ++ .../vvp-cms-uwsgi/resources/config/cms/storage.py | 50 +++ 3 files changed, 465 insertions(+) create mode 100644 kubernetes/vvp/charts/vvp-cms-uwsgi/resources/config/cms/__init__.py create mode 100644 kubernetes/vvp/charts/vvp-cms-uwsgi/resources/config/cms/gunicorn.ini create mode 100644 kubernetes/vvp/charts/vvp-cms-uwsgi/resources/config/cms/storage.py (limited to 'kubernetes/vvp/charts/vvp-cms-uwsgi/resources') diff --git a/kubernetes/vvp/charts/vvp-cms-uwsgi/resources/config/cms/__init__.py b/kubernetes/vvp/charts/vvp-cms-uwsgi/resources/config/cms/__init__.py new file mode 100644 index 0000000000..b583985739 --- /dev/null +++ b/kubernetes/vvp/charts/vvp-cms-uwsgi/resources/config/cms/__init__.py @@ -0,0 +1,395 @@ +# Copyright © 2018 Amdocs, AT&T, Bell Canada +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +from __future__ import absolute_import, unicode_literals +import os +from cms.envbool import envbool + +from django import VERSION as DJANGO_VERSION +from django.utils.translation import ugettext_lazy as _ +from boto.s3.connection import OrdinaryCallingFormat + + +###################### +# MEZZANINE SETTINGS # +###################### + +# The following settings are already defined with default values in +# the ``defaults.py`` module within each of Mezzanine's apps, but are +# common enough to be put here, commented out, for conveniently +# overriding. Please consult the settings documentation for a full list +# of settings Mezzanine implements: +# http://mezzanine.jupo.org/docs/configuration.html#default-settings + +# Controls the ordering and grouping of the admin menu. +# +# ADMIN_MENU_ORDER = ( +# ("Content", ("pages.Page", "blog.BlogPost", +# "generic.ThreadedComment", (_("Media Library"), "media-library"),)), +# ("Site", ("sites.Site", "redirects.Redirect", "conf.Setting")), +# ("Users", ("auth.User", "auth.Group",)), +# ) + +# A three item sequence, each containing a sequence of template tags +# used to render the admin dashboard. +# +# DASHBOARD_TAGS = ( +# ("blog_tags.quick_blog", "mezzanine_tags.app_list"), +# ("comment_tags.recent_comments",), +# ("mezzanine_tags.recent_actions",), +# ) + +# A sequence of templates used by the ``page_menu`` template tag. Each +# item in the sequence is a three item sequence, containing a unique ID +# for the template, a label for the template, and the template path. +# These templates are then available for selection when editing which +# menus a page should appear in. Note that if a menu template is used +# that doesn't appear in this setting, all pages will appear in it. + +# PAGE_MENU_TEMPLATES = ( +# (1, _("Top navigation bar"), "pages/menus/dropdown.html"), +# (2, _("Left-hand tree"), "pages/menus/tree.html"), +# (3, _("Footer"), "pages/menus/footer.html"), +# ) + +# A sequence of fields that will be injected into Mezzanine's (or any +# library's) models. Each item in the sequence is a four item sequence. +# The first two items are the dotted path to the model and its field +# name to be added, and the dotted path to the field class to use for +# the field. The third and fourth items are a sequence of positional +# args and a dictionary of keyword args, to use when creating the +# field instance. When specifying the field class, the path +# ``django.models.db.`` can be omitted for regular Django model fields. +# +# EXTRA_MODEL_FIELDS = ( +# ( +# # Dotted path to field. +# "mezzanine.blog.models.BlogPost.image", +# # Dotted path to field class. +# "somelib.fields.ImageField", +# # Positional args for field class. +# (_("Image"),), +# # Keyword args for field class. +# {"blank": True, "upload_to": "blog"}, +# ), +# # Example of adding a field to *all* of Mezzanine's content types: +# ( +# "mezzanine.pages.models.Page.another_field", +# "IntegerField", # 'django.db.models.' is implied if path is omitted. +# (_("Another name"),), +# {"blank": True, "default": 1}, +# ), +# ) + +# Setting to turn on featured images for blog posts. Defaults to False. +# +# BLOG_USE_FEATURED_IMAGE = True + +# If True, the django-modeltranslation will be added to the +# INSTALLED_APPS setting. +USE_MODELTRANSLATION = False + + +######################## +# MAIN DJANGO SETTINGS # +######################## + +# Hosts/domain names that are valid for this site; required if DEBUG is False +# See https://docs.djangoproject.com/en/dev/ref/settings/#allowed-hosts +ALLOWED_HOSTS = ['*'] + +# Set UTC time zone: +TIME_ZONE = 'UTC' +USE_TZ = True + +# Local time zone for this installation. Choices can be found here: +# http://en.wikipedia.org/wiki/List_of_tz_zones_by_name +# although not all choices may be available on all operating systems. +# On Unix systems, a value of None will cause Django to use the same +# timezone as the operating system. +# If running in a Windows environment this must be set to the same as your +# system time zone. +TIME_ZONE = 'UTC' + +# If you set this to True, Django will use timezone-aware datetimes. +USE_TZ = True + +# Language code for this installation. All choices can be found here: +# http://www.i18nguy.com/unicode/language-identifiers.html +LANGUAGE_CODE = "en" + +# Supported languages +LANGUAGES = ( + ('en', _('English')), +) + +ENVIRONMENT = os.environ['ENVIRONMENT'] + +# See https://docs.djangoproject.com/en/1.9/howto/deployment/checklist/ +SECRET_KEY = os.environ["SECRET_KEY"] + +# A boolean that turns on/off debug mode. When set to ``True``, stack traces +# are displayed for error pages. Should always be set to ``False`` in +# production. Best set to ``True`` in local_settings.py +DEBUG = envbool('DJANGO_DEBUG_MODE', False) + +# Note: Only SSL email backends are allowed +EMAIL_USE_SSL = True + +# Whether a user's session cookie expires when the Web browser is closed. +SESSION_EXPIRE_AT_BROWSER_CLOSE = True + +SITE_ID = 1 + +# If you set this to False, Django will make some optimizations so as not +# to load the internationalization machinery. +USE_I18N = False + +AUTHENTICATION_BACKENDS = ("mezzanine.core.auth_backends.MezzanineBackend",) + +# The numeric mode to set newly-uploaded files to. The value should be +# a mode you'd pass directly to os.chmod. +FILE_UPLOAD_PERMISSIONS = 0o644 + + +############# +# DATABASES # +############# + +DATABASES = { + 'default': { + 'ENGINE': 'django.db.backends.postgresql', + 'NAME': os.environ['PGDATABASE'], + 'USER': os.environ['PGUSER'], + 'PASSWORD': os.environ['PGPASSWORD'], + 'HOST': os.environ['PGHOST'], + 'PORT': os.environ['PGPORT'], + } +} + + +######### +# PATHS # +######### + +# Full filesystem path to the project. +PROJECT_APP_PATH = os.path.dirname(os.path.abspath(__file__)) +PROJECT_APP = os.path.basename(PROJECT_APP_PATH) +PROJECT_ROOT = BASE_DIR = os.path.dirname(PROJECT_APP_PATH) + +# Every cache key will get prefixed with this value - here we set it to +# the name of the directory the project is in to try and use something +# project specific. +CACHE_MIDDLEWARE_KEY_PREFIX = PROJECT_APP + +# Package/module name to import the root urlpatterns from for the project. +ROOT_URLCONF = 'cms.urls' + +TEMPLATES = [ + { + "BACKEND": "django.template.backends.django.DjangoTemplates", + "DIRS": [ + os.path.join(PROJECT_ROOT, "templates") + ], + "APP_DIRS": True, + "OPTIONS": { + "context_processors": [ + "django.contrib.auth.context_processors.auth", + "django.contrib.messages.context_processors.messages", + "django.template.context_processors.debug", + "django.template.context_processors.i18n", + "django.template.context_processors.static", + "django.template.context_processors.media", + "django.template.context_processors.request", + "django.template.context_processors.tz", + "mezzanine.conf.context_processors.settings", + "mezzanine.pages.context_processors.page", + ], + "builtins": [ + "mezzanine.template.loader_tags", + ], + }, + }, +] + +if DJANGO_VERSION < (1, 9): + del TEMPLATES[0]["OPTIONS"]["builtins"] + + +################ +# APPLICATIONS # +################ + +INSTALLED_APPS = ( + "mezzanine_api", + "rest_framework", + "rest_framework_swagger", + "oauth2_provider", + "django.contrib.admin", + "django.contrib.auth", + "django.contrib.contenttypes", + "django.contrib.redirects", + "django.contrib.sessions", + "django.contrib.sites", + "django.contrib.sitemaps", + "django.contrib.staticfiles", + "mezzanine.boot", + "mezzanine.conf", + "mezzanine.core", + "mezzanine.generic", + "mezzanine.pages", + "mezzanine.blog", + "mezzanine.forms", + "mezzanine.galleries", + "mezzanine.twitter", + # "mezzanine.accounts", + # "mezzanine.mobile", + "cms" , + "storages", +) + +# List of middleware classes to use. Order is important; in the request phase, +# these middleware classes will be applied in the order given, and in the +# response phase the middleware will be applied in reverse order. +MIDDLEWARE_CLASSES = ( + "mezzanine.core.middleware.UpdateCacheMiddleware", + "mezzanine_api.middleware.ApiMiddleware", + 'django.contrib.sessions.middleware.SessionMiddleware', + # Uncomment if using internationalisation or localisation + # 'django.middleware.locale.LocaleMiddleware', + 'django.middleware.common.CommonMiddleware', + 'django.middleware.csrf.CsrfViewMiddleware', + 'django.contrib.auth.middleware.AuthenticationMiddleware', + 'django.contrib.auth.middleware.SessionAuthenticationMiddleware', + 'django.contrib.messages.middleware.MessageMiddleware', + 'django.middleware.clickjacking.XFrameOptionsMiddleware', + + "mezzanine.core.request.CurrentRequestMiddleware", + "mezzanine.core.middleware.RedirectFallbackMiddleware", + "mezzanine.core.middleware.TemplateForDeviceMiddleware", + "mezzanine.core.middleware.TemplateForHostMiddleware", + "mezzanine.core.middleware.AdminLoginInterfaceSelectorMiddleware", + "mezzanine.core.middleware.SitePermissionMiddleware", + "mezzanine.pages.middleware.PageMiddleware", + "mezzanine.core.middleware.FetchFromCacheMiddleware", +) + +# Store these package names here as they may change in the future since +# at the moment we are using custom forks of them. +PACKAGE_NAME_FILEBROWSER = "filebrowser_safe" +PACKAGE_NAME_GRAPPELLI = "grappelli_safe" + +######################### +# OPTIONAL APPLICATIONS # +######################### + +# These will be added to ``INSTALLED_APPS``, only if available. +OPTIONAL_APPS = ( + "debug_toolbar", + "django_extensions", + "compressor", + PACKAGE_NAME_FILEBROWSER, + PACKAGE_NAME_GRAPPELLI, +) + +##################### +# REST API SETTINGS # +##################### +try: + from mezzanine_api.settings import * +except ImportError: + pass + + +################## +# LOCAL SETTINGS # +################## + +# Allow any settings to be defined in local_settings.py which should be +# ignored in your version control system allowing for settings to be +# defined per ma chine. + +# Instead of doing "from .local_settings import *", we use exec so that +# local_settings has full access to everything defined in this module. +# Also force into sys.modules so it's visible to Django's autoreload. + +f = os.path.join(PROJECT_APP_PATH, "local_settings/__init__.py") +if os.path.exists(f): + import sys + import imp + module_name = "%s.local_settings" % PROJECT_APP + module = imp.new_module(module_name) + module.__file__ = f + sys.modules[module_name] = module + exec(open(f, "rb").read()) + + +#################### +# DYNAMIC SETTINGS # +#################### + +# set_dynamic_settings() will rewrite globals based on what has been +# defined so far, in order to provide some better defaults where +# applicable. We also allow this settings module to be imported +# without Mezzanine installed, as the case may be when using the +# fabfile, where setting the dynamic settings below isn't strictly +# required. +try: + from mezzanine.utils.conf import set_dynamic_settings +except ImportError: + pass +else: + set_dynamic_settings(globals()) + +# default settings for mezzanine +NEVERCACHE_KEY = os.getenv('CMS_NEVERCACHE_KEY', ''), +# Application User +CMS_APP_USER = os.getenv('CMS_APP_USER') +CMS_APP_USER_PASSWORD = os.getenv('CMS_APP_USER_PASSWORD') +CMS_APP_USER_MAIL = os.getenv('CMS_APP_USER_MAIL') +# Client App (EM) +CMS_APP_CLIENT_ID = os.getenv('CMS_APP_CLIENT_ID') +CMS_APP_CLIENT_SECRET = os.getenv('CMS_APP_CLIENT_SECRET') +CMS_APP_NAME = 'Engagement_Manager_App' +REST_FRAMEWORK['DEFAULT_RENDERER_CLASSES'] = ( + 'rest_framework.renderers.JSONRenderer', +) + +# S3 configuration for static resources storage and media upload + +# used by our custom storage.py +MEDIA_BUCKET = "cms-media" +STATIC_BUCKET = "cms-static" + +# django-storages configuration +AWS_S3_HOST = os.environ['S3_HOST'] +AWS_S3_PORT = int(os.environ['S3_PORT']) +AWS_S3_CUSTOM_DOMAIN = os.environ['S3_HOST'] +AWS_ACCESS_KEY_ID = os.environ['AWS_ACCESS_KEY_ID'] +AWS_SECRET_ACCESS_KEY = os.environ['AWS_SECRET_ACCESS_KEY'] +AWS_AUTO_CREATE_BUCKET = True +AWS_PRELOAD_METADATA = True + +# Set by custom subclass. +# AWS_STORAGE_BUCKET_NAME = "em-static" +AWS_S3_CALLING_FORMAT = OrdinaryCallingFormat() +DEFAULT_FILE_STORAGE = 'cms.settings.storage.S3MediaStorage' +STATICFILES_STORAGE = 'cms.settings.storage.S3StaticStorage' + +# These seem to have no effect even when we don't override with custom_domain? +STATIC_URL = 'https://%s/%s/' % (AWS_S3_CUSTOM_DOMAIN, STATIC_BUCKET) +MEDIA_URL = 'https://%s/%s/' % (AWS_S3_CUSTOM_DOMAIN, MEDIA_BUCKET) + +STATIC_ROOT = os.environ['STATIC_ROOT'] + diff --git a/kubernetes/vvp/charts/vvp-cms-uwsgi/resources/config/cms/gunicorn.ini b/kubernetes/vvp/charts/vvp-cms-uwsgi/resources/config/cms/gunicorn.ini new file mode 100644 index 0000000000..29cca7db93 --- /dev/null +++ b/kubernetes/vvp/charts/vvp-cms-uwsgi/resources/config/cms/gunicorn.ini @@ -0,0 +1,20 @@ +# Copyright © 2018 Amdocs, AT&T, Bell Canada +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +bind = ":80" +chdir = '/srv' +pidfile = '/tmp/ice-project-master.pid' +backlog = '5000' +errorlog = '-' +loglevel = 'info' diff --git a/kubernetes/vvp/charts/vvp-cms-uwsgi/resources/config/cms/storage.py b/kubernetes/vvp/charts/vvp-cms-uwsgi/resources/config/cms/storage.py new file mode 100644 index 0000000000..0abfae9035 --- /dev/null +++ b/kubernetes/vvp/charts/vvp-cms-uwsgi/resources/config/cms/storage.py @@ -0,0 +1,50 @@ +# Copyright © 2018 Amdocs, AT&T, Bell Canada +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +""" +storage.py + +In order to make Django store trusted static files and untrusted media +(user-uploaded) files in separate s3 buckets, we must create two different +storage classes. + +https://www.caktusgroup.com/blog/2014/11/10/Using-Amazon-S3-to-store-your-Django-sites-static-and-media-files/ +http://www.leehodgkinson.com/blog/my-mezzanine-s3-setup/ + +""" + +# FIXME this module never changes so might not need not be kept in a +# configmap. Also it is (almost) the same as what we use in em; that does +# not use S3BotoStorageMixin. + +# There is a newer storage based on boto3 but that doesn't support changing +# the HOST, as we need to for non-amazon s3 services. It does support an +# "endpoint"; setting AWS_S3_ENDPOINT_URL may cause it to work. +from storages.backends.s3boto import S3BotoStorage +from filebrowser_safe.storage import S3BotoStorageMixin +from django.conf import settings + + +# NOTE for some reason, collectstatic uploads to bucket/location but the +# urls constructed are domain/location +class S3StaticStorage(S3BotoStorage, S3BotoStorageMixin): + custom_domain = '%s/%s' % (settings.AWS_S3_HOST, settings.STATIC_BUCKET) + bucket_name = settings.STATIC_BUCKET + # location = ... + + +class S3MediaStorage(S3BotoStorage, S3BotoStorageMixin): + custom_domain = '%s/%s' % (settings.AWS_S3_HOST, settings.MEDIA_BUCKET) + bucket_name = settings.MEDIA_BUCKET + # location = ... -- cgit 1.2.3-korg