From 13fed1118cedf88ea65a92d27f550d02fe23c41a Mon Sep 17 00:00:00 2001 From: Mike Elliott Date: Wed, 28 Feb 2018 08:33:33 -0500 Subject: Add standardized helm chart for appc This is a standardization (based on helm community best practices) of a Helm chart for the Application Controller (appc) in ONAP. How to deploy the helm chart (outside of the parent onap chart) from the local oom/kubernetes codebase. Run local helm repository in the background: $ nohup helm serve & In kubernetes directory run: $ make all 2 ways to install (--set are for testing purposes) Full onap: $ helm install onap --name onap --namespace onap --set global.pullPolicy=Never,mysql.replicaCount=2,appc.replicaCount=2 Appc only: $ helm install setup --name onap-setup --namespace onap-apps $ helm install appc --name appc --namespace onap-apps Change-Id: Ib780f979ad25ecafb08110504b5941e980ca8a95 Issue-ID: OOM-733 Signed-off-by: Mike Elliott Signed-off-by: ah415j --- kubernetes/dgbuilder/.helmignore | 21 ++++ kubernetes/dgbuilder/Chart.yaml | 4 + kubernetes/dgbuilder/requirements.yaml | 4 + .../dgbuilder/resources/config/svclogic.properties | 5 + .../resources/scripts/createReleaseDir.sh | 129 +++++++++++++++++++++ .../dgbuilder/resources/scripts/customSettings.js | 38 ++++++ kubernetes/dgbuilder/templates/NOTES.txt | 19 +++ kubernetes/dgbuilder/templates/configmap.yaml | 15 +++ kubernetes/dgbuilder/templates/deployment.yaml | 98 ++++++++++++++++ kubernetes/dgbuilder/templates/secrets.yaml | 13 +++ kubernetes/dgbuilder/templates/service.yaml | 26 +++++ kubernetes/dgbuilder/values.yaml | 93 +++++++++++++++ 12 files changed, 465 insertions(+) create mode 100644 kubernetes/dgbuilder/.helmignore create mode 100644 kubernetes/dgbuilder/Chart.yaml create mode 100644 kubernetes/dgbuilder/requirements.yaml create mode 100644 kubernetes/dgbuilder/resources/config/svclogic.properties create mode 100755 kubernetes/dgbuilder/resources/scripts/createReleaseDir.sh create mode 100644 kubernetes/dgbuilder/resources/scripts/customSettings.js create mode 100644 kubernetes/dgbuilder/templates/NOTES.txt create mode 100644 kubernetes/dgbuilder/templates/configmap.yaml create mode 100644 kubernetes/dgbuilder/templates/deployment.yaml create mode 100644 kubernetes/dgbuilder/templates/secrets.yaml create mode 100644 kubernetes/dgbuilder/templates/service.yaml create mode 100644 kubernetes/dgbuilder/values.yaml (limited to 'kubernetes/dgbuilder') diff --git a/kubernetes/dgbuilder/.helmignore b/kubernetes/dgbuilder/.helmignore new file mode 100644 index 0000000000..f0c1319444 --- /dev/null +++ b/kubernetes/dgbuilder/.helmignore @@ -0,0 +1,21 @@ +# Patterns to ignore when building packages. +# This supports shell glob matching, relative path matching, and +# negation (prefixed with !). Only one pattern per line. +.DS_Store +# Common VCS dirs +.git/ +.gitignore +.bzr/ +.bzrignore +.hg/ +.hgignore +.svn/ +# Common backup files +*.swp +*.bak +*.tmp +*~ +# Various IDEs +.project +.idea/ +*.tmproj diff --git a/kubernetes/dgbuilder/Chart.yaml b/kubernetes/dgbuilder/Chart.yaml new file mode 100644 index 0000000000..e1955a137c --- /dev/null +++ b/kubernetes/dgbuilder/Chart.yaml @@ -0,0 +1,4 @@ +apiVersion: v1 +description: D.G. Builder application +name: dgbuilder +version: 2.0.0 \ No newline at end of file diff --git a/kubernetes/dgbuilder/requirements.yaml b/kubernetes/dgbuilder/requirements.yaml new file mode 100644 index 0000000000..acca8ef7e2 --- /dev/null +++ b/kubernetes/dgbuilder/requirements.yaml @@ -0,0 +1,4 @@ +dependencies: + - name: common + version: ~2.0.0 + repository: '@local' \ No newline at end of file diff --git a/kubernetes/dgbuilder/resources/config/svclogic.properties b/kubernetes/dgbuilder/resources/config/svclogic.properties new file mode 100644 index 0000000000..fdaf5779e2 --- /dev/null +++ b/kubernetes/dgbuilder/resources/config/svclogic.properties @@ -0,0 +1,5 @@ +org.onap.ccsdk.sli.dbtype=jdbc +org.onap.ccsdk.sli.jdbc.url=jdbc:mysql://{{.Values.dbServiceName}}.{{ include "common.namespace" . }}:3306/sdnctl +org.onap.ccsdk.sli.jdbc.database=sdnctl +org.onap.ccsdk.sli.jdbc.user=sdnctl +org.onap.ccsdk.sli.jdbc.password=gamma diff --git a/kubernetes/dgbuilder/resources/scripts/createReleaseDir.sh b/kubernetes/dgbuilder/resources/scripts/createReleaseDir.sh new file mode 100755 index 0000000000..38f7fe2720 --- /dev/null +++ b/kubernetes/dgbuilder/resources/scripts/createReleaseDir.sh @@ -0,0 +1,129 @@ +#!/bin/bash +export PATH=$PATH:. +appDir=$(pwd) +if [ "$#" != 3 -a "$#" != 4 ] +then + echo "Usage $0 releaseDir loginId emailAddress [gitLocalRepository]" + echo "Note: Specify the gitLocalRepository path if you would want to be able to import flows from your local git repository" + exit +fi +if [ ! -e "releases" ] +then + mkdir releases +fi +releaseDir="$1" +name="Release $releaseDir" +loginId="$2" +emailid="$3" +dbHost="{{.Values.dbServiceName}}.{{.Release.Namespace}}" +dbPort="3306" +dbName="sdnctl" +dbUser="sdnctl" +dbPassword="gamma" +gitLocalRepository="$4" + +lastPort=$(find "releases/" -name "customSettings.js" |xargs grep uiPort|cut -d: -f2|sed -e s/,//|sort|tail -1) +echo $lastPort|grep uiPort >/dev/null 2>&1 +if [ "$?" == "0" ] +then +lastPort=$(find "releases/" -name "customSettings.js" |xargs grep uiPort|cut -d: -f3|sed -e s/,//|sort|tail -1) +fi +#echo $lastPort +if [ "${lastPort}" == "" ] +then + lastPort="3099" +fi +let nextPort=$(expr $lastPort+1) +#echo $nextPort +if [ ! -e "releases/$releaseDir" ] +then +mkdir releases/$releaseDir +cd releases/$releaseDir +mkdir flows +mkdir flows/shared +mkdir flows/shared/backups +mkdir html +mkdir xml +mkdir lib +mkdir lib/flows +mkdir logs +mkdir conf +mkdir codecloud +customSettingsFile="customSettings.js" +if [ ! -e "./$customSettingsFile" ] +then + echo "module.exports = {" >$customSettingsFile + echo " 'name' : '$name'," >>$customSettingsFile + echo " 'emailAddress' :'$emailid'," >>$customSettingsFile + echo " 'uiPort' :$nextPort," >>$customSettingsFile + echo " 'mqttReconnectTime': 15000," >>$customSettingsFile + echo " 'serialReconnectTime' : 15000," >>$customSettingsFile + echo " 'debugMaxLength': 1000," >>$customSettingsFile + echo " 'htmlPath': 'releases/$releaseDir/html/'," >>$customSettingsFile + echo " 'xmlPath': 'releases/$releaseDir/xml/'," >>$customSettingsFile + echo " 'flowFile' : 'releases/$releaseDir/flows/flows.json'," >>$customSettingsFile + echo " 'sharedDir': 'releases/$releaseDir/flows/shared'," >>$customSettingsFile + echo " 'userDir' : 'releases/$releaseDir'," >>$customSettingsFile + echo " 'httpAuth': {user:'$loginId',pass:'cc03e747a6afbbcbf8be7668acfebee5'}," >>$customSettingsFile + echo " 'dbHost': '$dbHost'," >>$customSettingsFile + echo " 'dbPort': '$dbPort'," >>$customSettingsFile + echo " 'dbName': '$dbName'," >>$customSettingsFile + echo " 'dbUser': '$dbUser'," >>$customSettingsFile + echo " 'dbPassword': '$dbPassword'," >>$customSettingsFile + echo " 'gitLocalRepository': '$gitLocalRepository'" >>$customSettingsFile + echo " }" >>$customSettingsFile +fi + #echo "Created custom settings file $customSettingsFile" + echo "Done ....." +else + echo "ERROR:customSettings file $customSettingsFile already exists for $releaseDir" + exit +fi +#echo "Content of custom settings file" +#echo "============================================================================" +# cat $customSettingsFile +#echo "============================================================================" +svclogicPropFile="./conf/svclogic.properties" +if [ ! -d "${appDir}/yangFiles" ] +then + mkdir -p "${appDir}/yangFiles" +fi +if [ ! -d "${appDir}/generatedJS" ] +then + mkdir -p "${appDir}/generatedJS" +fi + +if [ ! -e "./$svclogicPropFile" ] +then + echo "org.onap.ccsdk.sli.dbtype=jdbc" >$svclogicPropFile + echo "org.onap.ccsdk.sli.jdbc.url=jdbc:mysql://{{.Values.dbServiceName}}.{{.Release.Namespace}}:3306/sdnctl" >>$svclogicPropFile + echo "org.onap.ccsdk.sli.jdbc.database=sdnctl" >>$svclogicPropFile + echo "org.onap.ccsdk.sli.jdbc.user=sdnctl" >>$svclogicPropFile + echo "org.onap.ccsdk.sli.jdbc.password=gamma" >>$svclogicPropFile +fi +if [ ! -e "${appDir}/flowShareUsers.js" ] +then + echo "module.exports = {\"flowShareUsers\":" >${appDir}/flowShareUsers.js + echo " [" >>${appDir}/flowShareUsers.js + echo " ]" >>${appDir}/flowShareUsers.js + echo "}" >>${appDir}/flowShareUsers.js +fi +grep "$releaseDir" ${appDir}/flowShareUsers.js >/dev/null 2>&1 +if [ "$?" != "0" ] +then + num_of_lines=$(cat ${appDir}/flowShareUsers.js|wc -l) + if [ $num_of_lines -gt 4 ] + then + content=$(head -n -2 ${appDir}/flowShareUsers.js) + echo "${content}," > ${appDir}/flowShareUsers.js + else + content=$(head -n -2 ${appDir}/flowShareUsers.js) + echo "$content" > ${appDir}/flowShareUsers.js + fi + echo " {" >> ${appDir}/flowShareUsers.js + echo " \"name\" : \"$name\"," >> ${appDir}/flowShareUsers.js + echo " \"rootDir\" : \"$releaseDir\"" >> ${appDir}/flowShareUsers.js + echo " }" >> ${appDir}/flowShareUsers.js + echo " ]" >> ${appDir}/flowShareUsers.js + echo "}" >> ${appDir}/flowShareUsers.js +fi diff --git a/kubernetes/dgbuilder/resources/scripts/customSettings.js b/kubernetes/dgbuilder/resources/scripts/customSettings.js new file mode 100644 index 0000000000..f09d396f96 --- /dev/null +++ b/kubernetes/dgbuilder/resources/scripts/customSettings.js @@ -0,0 +1,38 @@ +module.exports={ + "name": "Release sdnc1.0", + "emailAddress": "dguser@onap.org", + "uiPort": 3100, + "mqttReconnectTime": 15000, + "serialReconnectTime": 15000, + "debugMaxLength": 1000, + "htmlPath": "releases/sdnc1.0/html/", + "xmlPath": "releases/sdnc1.0/xml/", + "flowFile": "releases/sdnc1.0/flows/flows.json", + "sharedDir": "releases/sdnc1.0/flows/shared", + "userDir": "releases/sdnc1.0", + "httpAuth": { + "user": "dguser", + "pass": "cc03e747a6afbbcbf8be7668acfebee5" + }, + "dbHost": "{{.Values.dbServiceName}}.{{ include "common.namespace" . }}", + "dbPort": "3306", + "dbName": "sdnctl", + "dbUser": "sdnctl", + "dbPassword": "gamma", + "gitLocalRepository": "", + "httpRoot": "/", + "disableEditor": false, + "httpAdminRoot": "/", + "httpAdminAuth": { + "user": "dguser", + "pass": "cc03e747a6afbbcbf8be7668acfebee5" + }, + "httpNodeRoot": "/", + "httpNodeAuth": { + "user": "dguser", + "pass": "cc03e747a6afbbcbf8be7668acfebee5" + }, + "uiHost": "0.0.0.0", + "version": "0.9.1", + "performGitPull": "N" +} diff --git a/kubernetes/dgbuilder/templates/NOTES.txt b/kubernetes/dgbuilder/templates/NOTES.txt new file mode 100644 index 0000000000..2465e03634 --- /dev/null +++ b/kubernetes/dgbuilder/templates/NOTES.txt @@ -0,0 +1,19 @@ +1. Get the application URL by running these commands: +{{- if .Values.ingress.enabled }} +{{- range .Values.ingress.hosts }} + http://{{ . }} +{{- end }} +{{- else if contains "NodePort" .Values.service.type }} + export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.fullname" . }}) + export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}") + echo http://$NODE_IP:$NODE_PORT +{{- else if contains "LoadBalancer" .Values.service.type }} + NOTE: It may take a few minutes for the LoadBalancer IP to be available. + You can watch the status of by running 'kubectl get svc -w {{ include "common.fullname" . }}' + export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.fullname" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}') + echo http://$SERVICE_IP:{{ .Values.service.externalPort }} +{{- else if contains "ClusterIP" .Values.service.type }} + export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ template "so.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}") + echo "Visit http://127.0.0.1:8080 to use your application" + kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }} +{{- end }} diff --git a/kubernetes/dgbuilder/templates/configmap.yaml b/kubernetes/dgbuilder/templates/configmap.yaml new file mode 100644 index 0000000000..7ef92d09e7 --- /dev/null +++ b/kubernetes/dgbuilder/templates/configmap.yaml @@ -0,0 +1,15 @@ +apiVersion: v1 +kind: ConfigMap +metadata: + name: {{ include "common.fullname" . }}-config + namespace: {{ include "common.namespace" . }} +data: +{{ tpl (.Files.Glob "resources/config/*").AsConfig . | indent 2 }} +--- +apiVersion: v1 +kind: ConfigMap +metadata: + name: {{ include "common.fullname" . }}-scripts + namespace: {{ include "common.namespace" . }} +data: +{{ tpl (.Files.Glob "resources/scripts/*").AsConfig . | indent 2 }} diff --git a/kubernetes/dgbuilder/templates/deployment.yaml b/kubernetes/dgbuilder/templates/deployment.yaml new file mode 100644 index 0000000000..4e1f1019ee --- /dev/null +++ b/kubernetes/dgbuilder/templates/deployment.yaml @@ -0,0 +1,98 @@ +apiVersion: extensions/v1beta1 +kind: Deployment +metadata: + name: {{ include "common.fullname" . }} + namespace: {{ include "common.namespace" . }} + labels: + app: {{ include "common.name" . }} + chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} + release: {{ .Release.Name }} + heritage: {{ .Release.Service }} +spec: + replicas: {{ .Values.replicaCount }} + template: + metadata: + labels: + app: {{ include "common.name" . }} + release: {{ .Release.Name }} + spec: + initContainers: + - command: + - /root/ready.py + args: + - --container-name + - {{ .Values.dbPodName }} + env: + - name: NAMESPACE + valueFrom: + fieldRef: + apiVersion: v1 + fieldPath: metadata.namespace + image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}" + imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }} + name: {{ include "common.name" . }}-readiness + containers: + - name: {{ include "common.name" . }} + image: "{{ .Values.global.repository | default .Values.repository }}/{{ .Values.image }}" + imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }} + command: + - /bin/bash + - -c + - cd /opt/onap/sdnc/dgbuilder/ && ./start.sh sdnc1.0 && wait + ports: + - containerPort: {{ .Values.service.internalPort }} + readinessProbe: + tcpSocket: + port: {{ .Values.service.internalPort }} + initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }} + periodSeconds: {{ .Values.readiness.periodSeconds }} + env: + - name: MYSQL_ROOT_PASSWORD + valueFrom: + secretKeyRef: + name: {{ template "common.fullname" . }} + key: db-root-password + - name: SDNC_CONFIG_DIR + value: /opt/onap/sdnc/data/properties + volumeMounts: + - mountPath: /etc/localtime + name: localtime + readOnly: true + - name: config + mountPath: /opt/app/application.properties + subPath: application.properties + - name: config + mountPath: /opt/onap/sdnc/dgbuilder/releases/sdnc1.0/conf/svclogic.properties + subPath: svclogic.properties + - name: config + mountPath: /opt/onap/sdnc/dgbuilder/svclogic/svclogic.properties + subPath: svclogic.properties + - name: scripts + mountPath: /opt/onap/sdnc/dgbuilder/createReleaseDir.sh + subPath: createReleaseDir.sh + - name: scripts + mountPath: /opt/onap/sdnc/dgbuilder/releases/sdnc1.0/customSettings.js + subPath: customSettings.js + resources: +{{ toYaml .Values.resources | indent 12 }} + {{- if .Values.nodeSelector }} + nodeSelector: +{{ toYaml .Values.nodeSelector | indent 10 }} + {{- end -}} + {{- if .Values.affinity }} + affinity: +{{ toYaml .Values.affinity | indent 10 }} + {{- end }} + volumes: + - name: localtime + hostPath: + path: /etc/localtime + - name: config + configMap: + name: {{ include "common.fullname" . }}-config + - name: scripts + configMap: + name: {{ include "common.fullname" . }}-scripts + defaultMode: 0755 + imagePullSecrets: + - name: "{{ include "common.namespace" . }}-docker-registry-key" diff --git a/kubernetes/dgbuilder/templates/secrets.yaml b/kubernetes/dgbuilder/templates/secrets.yaml new file mode 100644 index 0000000000..7604be8239 --- /dev/null +++ b/kubernetes/dgbuilder/templates/secrets.yaml @@ -0,0 +1,13 @@ +apiVersion: v1 +kind: Secret +metadata: + name: {{ include "common.fullname" . }} + namespace: {{ include "common.namespace" . }} + labels: + app: {{ include "common.fullname" . }} + chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} + release: {{ .Release.Name }} + heritage: {{ .Release.Service }} +type: Opaque +data: + db-root-password: {{ .Values.config.dbRootPassword | b64enc | quote }} \ No newline at end of file diff --git a/kubernetes/dgbuilder/templates/service.yaml b/kubernetes/dgbuilder/templates/service.yaml new file mode 100644 index 0000000000..c61cdd549b --- /dev/null +++ b/kubernetes/dgbuilder/templates/service.yaml @@ -0,0 +1,26 @@ +apiVersion: v1 +kind: Service +metadata: + name: {{ include "common.fullname" . }} + namespace: {{ include "common.namespace" . }} + labels: + app: {{ include "common.name" . }} + chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} + release: {{ .Release.Name }} + heritage: {{ .Release.Service }} +spec: + type: {{ .Values.service.type }} + ports: + {{if eq .Values.service.type "NodePort" -}} + - port: {{ .Values.service.externalPort }} + targetPort: {{ .Values.service.internalPort }} + nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }} + name: {{ .Values.service.name }} + {{- else -}} + - port: {{ .Values.service.externalPort }} + targetPort: {{ .Values.service.internalPort }} + name: {{ .Values.service.name }} + {{- end}} + selector: + app: {{ include "common.name" . }} + release: {{ .Release.Name }} \ No newline at end of file diff --git a/kubernetes/dgbuilder/values.yaml b/kubernetes/dgbuilder/values.yaml new file mode 100644 index 0000000000..23f8eea78e --- /dev/null +++ b/kubernetes/dgbuilder/values.yaml @@ -0,0 +1,93 @@ +# Global configuration default values that can be inherited by +# all subcharts. +################################################################# +global: + # Change to an unused port prefix range to prevent port conflicts + # with other instances running within the same k8s cluster + nodePortPrefix: 302 + + # image repositories + repository: nexus3.onap.org:10001 + repositorySecret: eyJuZXh1czMub25hcC5vcmc6MTAwMDEiOnsidXNlcm5hbWUiOiJkb2NrZXIiLCJwYXNzd29yZCI6ImRvY2tlciIsImVtYWlsIjoiQCIsImF1dGgiOiJaRzlqYTJWeU9tUnZZMnRsY2c9PSJ9fQ== + + # readiness check + readinessRepository: oomk8s + readinessImage: readiness-check:1.0.0 + + # logging agent + loggingRepository: docker.elastic.co + loggingImage: beats/filebeat:5.5.0 + + # image pull policy + pullPolicy: Always + + # default mount path root directory referenced + # by persistent volumes and log files + persistence: + mountPath: /dockerdata-nfs + + # flag to enable debugging - application support required + debugEnabled: true + +################################################################# +# Application configuration defaults. +################################################################# +# application image +repository: nexus3.onap.org:10001 +image: onap/ccsdk-dgbuilder-image:v0.1.0 +pullPolicy: Always + +# flag to enable debugging - application support required +debugEnabled: false + +# application configuration +config: + dbRootPassword: openECOMP1.0 + +# default number of instances +replicaCount: 1 + +nodeSelector: {} + +affinity: {} + +# probe configuration parameters +liveness: + initialDelaySeconds: 10 + periodSeconds: 10 + # necessary to disable liveness probe when setting breakpoints + # in debugger so K8s doesn't restart unresponsive container + enabled: true + +readiness: + initialDelaySeconds: 10 + periodSeconds: 10 + +service: + type: NodePort + name: dgbuilder + externalPort: 3000 + internalPort: 3100 + nodePort: 28 + +ingress: + enabled: false + +resources: {} + # We usually recommend not to specify default resources and to leave this as a conscious + # choice for the user. This also increases chances charts run on environments with little + # resources, such as Minikube. If you do want to specify resources, uncomment the following + # lines, adjust them as necessary, and remove the curly braces after 'resources:'. + # + # Example: + # Configure resource requests and limits + # ref: http://kubernetes.io/docs/user-guide/compute-resources/ + # Minimum memory for development is 2 CPU cores and 4GB memory + # Minimum memory for production is 4 CPU cores and 8GB memory +#resources: +# limits: +# cpu: 2 +# memory: 4Gi +# requests: +# cpu: 2 +# memory: 4Gi -- cgit 1.2.3-korg