Age | Commit message (Collapse) | Author | Files | Lines |
|
Introduce the drprov-client (replaces dbc-client) and use
it to provision data router feeds and subscriptions for
DCAE datafile collector and pm-mapper.
- Update the common dmaap provisioning template to use
drprov-client instead of dbc-client.
- Add drprov-client image to the repository generator.
- Update the dcaegen2-services-common configMap template
to generate JSON files suitable for provisioning data
router directly.
- Update the dcaegen2-services-common deployment template
to use drprov-client as an init container instead of
dbc-client.
- Update dcae-datafile-collector and pm-mapper values.yaml
to format feed and subscription data properly for
drprov-client.
- Update versions for datarouter-node and datarouter-prov
- Update dependencies for DCAE datafile-collector and
pm-mapper, which no longer depend on DMAAP bus
controller.
Issue-ID: DMAAP-1893
Signed-off-by: Jack Lucas <jflos@sonoris.net>
Change-Id: Ia090365428362ff6aa94cfb4096ee4c6b554b480
|
|
Update chart versions to 13.0.0 for Montreal
Issue-ID: OOM-3173
Signed-off-by: Andreas Geissler <andreas-geissler@telekom.de>
Change-Id: Ie53fd021f01e459c464e44f4459a73ba0b00c172
|
|
Remove chart elements that deploy an AAF init container and
set up volumes that hold AAF-certificates.
Remove AAF values.yaml entries that are no longer needed.
Issue-ID: OOM-3068
Signed-off-by: Jack Lucas <jflos@sonoris.net>
Change-Id: I8e6659cf6aa4c214d485b9e78c28f55622e3a864
|
|
Move hv-ves to use strimzi kakfa tpl
Topic naming is invalid so adding overrides to tpl
Signed-off-by: efiacor <fiachra.corcoran@est.tech>
Change-Id: Ied93c6329f51c3219b09b4f67f174c9e15727188
Issue-ID: DMAAP-1854
|
|
Fix of resources template indent and therefore resources in components
Issue-ID: OOM-3104
Signed-off-by: miroslavmasaryk <miroslav.masaryk@telekom.com>
Change-Id: I825a3860db00cae4bb80b2aa2d82ac1a42b33124
|
|
Update chart versions 12.0.0 for London
Issue-ID: OOM-3046
Signed-off-by: Andreas Geissler <andreas-geissler@telekom.de>
Change-Id: Ic196235ff4f6ae14a7ecad799bd75a9666b2594a
|
|
Service Mesh patch for DCAE, changing port names to http.
Remove aaf-cm readiness check, set tlsServer to false (excluding restconf)
Added environment variables to pods to solve CBS problems
Disable VES authentcation in SM override
Change-Id: I42a12912f471d89bd4ebc6181f5454140e54a605
Issue-ID: OOM-2820
Issue-ID: DCAEGEN2-3277
Signed-off-by: rope252 <gareth.roper@est.tech>
Signed-off-by: Vijay Venkatesh Kumar <vv770d@att.com>
|
|
Allow overriding the default image repository for
the DCAE microservice image.
Issue-ID: OOM-2978
Signed-off-by: Jack Lucas <jflos@sonoris.net>
Change-Id: I7dab36db8eca6917411c8366c388082d5280e506
|
|
|
|
All Makefiles are updated to support SKIP_LINT option,
have a defined order of compilation (common -> components)
to support the parallel compilation of charts using:
make all -j8 (for 8 Jobs). Additionally use cm-push instead
of push to use the new K8S/Helm version
Issue-ID: OOM-3011
Signed-off-by: Andreas Geissler <andreas-geissler@telekom.de>
Change-Id: If9903c9d5bc646b5ce54075acc616e98c4b6706e
|
|
Change chart to mount application configuration configMap
directly on the application container and rely on the
DCAE SDK to do environment variable substitution on the
configMap content. This allows changing configuration
by editing the configMap without restarting the application.
Remove message router authenticated topic provisioning from
DCAE.
Issue-ID: DCAEGEN2-2935
Signed-off-by: Jack Lucas <jflos@sonoris.net>
Change-Id: I85139e64f8cb7e1b88f8fca8d5d84cc71f946290
|
|
Use version 11.0.0 for Kohn
Issue-ID: OOM-2971
Signed-off-by: Andreas Geissler <andreas-geissler@telekom.de>
Change-Id: Icc0e0839fc6def2035383b5fa4c9153fc15fafda
|
|
Move hv-ves to use strimzi kafka
Signed-off-by: efiacor <fiachra.corcoran@est.tech>
Change-Id: Ia441d060771186ba41465c8622291ff73b7561aa
Issue-ID: DMAAP-1705
|
|
Updated the policy-xacml-pdp access credentials
Issue-ID: DCAEGEN2-3128
Signed-off-by: Prativa Dora <prativa.dora@techmahindra.com>
Change-Id: I81655e4d79c792ea656eab9e6db660d27673c949
|
|
DCAE microservices no longer rely on Consul to
store their configuration information. This change
modifies the common DCAE microservice deployment
template to eliminate the initContainer that
loads configuration information into Consul.
Issue-ID: DCAEGEN2-3059
Signed-off-by: Jack Lucas <jflos@sonoris.net>
Change-Id: I4d9d547de020fe1987afab1c99cd033799ed7b36
|
|
Fix bug in dcaegen2-services-common deployment
template that caused a nil pointer error when
values.yaml for a dcaegen2 microservice did not
have a log.path entry.
Issue-ID: DCAEGEN2-3093
Signed-off-by: Jack Lucas <jflos@sonoris.net>
Change-Id: I3874fd4c4327b487f3a9bf7d95e747d86a320998
|
|
Until now DCAEGEN2 used its own templates instead of common ones. This
change switches filebeat sidecar generation to common.log templates.
Other ONAP components already use it. Filebeat is depreceated and with
use of common templates it is possible to disable it globally.
This patch also changes ConfigMap usage from per component ConfigMap to
one ConfigMap for all of DCAEGEN2 components. This is done to simplify
generated file as there are no differences between per component
ConfigMaps.
Issue-ID: OOM-1
Signed-off-by: Maciej Wereski <m.wereski@partner.samsung.com>
Change-Id: I87ffe4890b9a4d79edfe0669750dbf21b4a7b340
|
|
Add health checks for DCAE microservices deployed after
the initial installation of dcaegen2-services.
Issue-ID: DCAEGEN2-2959
Signed-off-by: Jack Lucas <jflos@sonoris.net>
Change-Id: Ife7620b252641d0ac466f3bb977d826f6e955446
|
|
Move all Chart.yaml to use apiVersion: 2
Move dependencies from requirements.yaml to Chart.yaml
Changes to all makeFiles
Changes to helm deploy plugin
Signed-off-by: efiacor <fiachra.corcoran@est.tech>
Change-Id: I03c5290eee9e40f76eacbf171e774204cf5fb1c0
Issue-ID: OOM-2845
|
|
By default, disable all dcaegen2 components except
config-binding-service, healthcheck,
and ves-openapi-manager.
Fix DNS name for the ONAP consul instance.
Move mongodb dependency from dcae-bootstrap to dcae-tcagen2.
Fix the generation of the JSON list of expected components for the
healthcheck services. (Previously could have a spurious leading
",")
Update healthcheck-container version to 2.3.0 for
logging enhancements and updated base image.
Issue-ID: DCAEGEN2-2968
Issue-ID: DCAEGEN2-2958
Issue-ID: DCAEGEN2-2983
Signed-off-by: Jack Lucas <jflos@sonoris.net>
Change-Id: I4bcce1d3e43e2e5c7cc2c3179870de72b55d5d2e
|
|
Use version 9.0.0 for Istanbul
Also update the doc.
Issue-ID: OOM-1
Signed-off-by: Sylvain Desbureaux <sylvain.desbureaux@orange.com>
Change-Id: I03e11799bf487226784c98b04116f005c89d1e70
|
|
|
|
- create a .pre-commit-config.yaml configuration file with
* gitlint
* trailing blanks linter
* tabs removal linter
- exclude .git folder from it
- exclude Makefiles since tabs are mandatory by default in them
- create a tox pre-commit profile to run it from tox
note gitlint is not runnable at this pre-commit stage
- create pre-commit-install and pre-commit-uninstall tox profiles to
(un)install hooks locally and (un)perform tests at each "git commit"
call (i.e. without calling manually the pre-commit tox profile)
- precise pre-commit stages/types in the pre-commit configuration file
so that hooks are installed correctly. This avoids messages about
skipped tests when they are run at a wrong stage.
Issue-ID: OOM-2643
Signed-off-by: guillaume.lambert <guillaume.lambert@orange.com>
Change-Id: Ie95bb4f6f90be80b05a1398973caffeff7936881
|
|
Add service account to requirements, values and deployment/statefulset
Issue-ID: OOM-2828
Signed-off-by: farida azmy <farida.azmy.ext@orange.com>
Change-Id: I9093839265e0d70dd68d7fdded0704942b4d6f71
|
|
Add a job for each microservice that deletes the
Consul key holding the microservice's configuration
when the microservice is undeployed. (Fixes a bug
in an earlier version that would loop indefinitely
if Consul had been undeployed first.)
Issue-ID: DCAEGEN2-2669
Signed-off-by: Jack Lucas <jflos@sonoris.net>
Change-Id: I9172fc014b79d2cc07c0b1a1a187a28c63b1838a
|
|
As ONAP (and policy framework) can be deployed with any release name,
the policy sidecar must support releasename as configuration.
The releasename is important to identify the K8S secret
created by Policy Framework (for retreiving the username/password
config required by Policy-Sidecar container).
Change-Id: I9145da841c68b585f2ad5f54c7df155470763f4f
Signed-off-by: Vijay Venkatesh Kumar <vv770d@att.com>
Issue-ID: DCAEGEN2-2870
Signed-off-by: Vijay Venkatesh Kumar <vv770d@att.com>
|
|
Helm deployment support for DCAE transformation
+ Template fix for policy config (duration)
Change-Id: Icf2c8d529d62207db3fedf31b0c4fc644ba2e744
Signed-off-by: Vijay Venkatesh Kumar <vv770d@att.com>
Issue-ID: DCAEGEN2-2706
Issue-ID: DCAEGEN2-2707
Issue-ID: DCAEGEN2-2709
Issue-ID: DCAEGEN2-2855
Signed-off-by: Vijay Venkatesh Kumar <vv770d@att.com>
|
|
- DCAE Helm Transformation (Phase-2)
- Charts for the microservices are found under
- oom/kubernetes/dcaegen2-services/dcae-datafile-collector
Issue-ID: DCAEGEN2-2715
Signed-off-by: ajay_dp001 <ajay.deep.singh@est.tech>
Change-Id: I6efa2d4cd9e838a7befaf16576f8e94ad0a3ef0f
|
|
Make external configMaps optional by
default for microservices
Make applicationConfig an optional parameter
in values.yaml for microservices.
Issue-ID: DCAEGEN2-2770
Issue-ID: DCAEGEN2-2782
Signed-off-by: Jack Lucas <jflos@sonoris.net>
Change-Id: I80ec8e4a1d55201c5a174f50159bac171953b031
|
|
As helm may cache the index.yaml from the server let's force it to
update it after we push our dcae common chart to be sure that the
building process of dcae services is able to find it.
Issue-ID: OOM-1
Signed-off-by: Krzysztof Opasiak <k.opasiak@samsung.com>
Change-Id: I5e88ee2652f81899a86be7e8231e81b87fb89139
|
|
|
|
Enable DCAEcommon and subcomponent charts package push/pull
to support standalone deployment for each component
Added delay to avoid race condition
Change-Id: I1a0bf08a6625d2d97078cd635a2bb42da629cce6
Signed-off-by: Vijay Venkatesh Kumar <vv770d@att.com>
Issue-ID: DCAEGEN2-2781
Signed-off-by: Vijay Venkatesh Kumar <vv770d@att.com>
|
|
- Remove cmpv2Certificate chart in order to deprecate CertService
client mechanism.
- Remove CertServiceClient init containers in SDNC.
- Replace CMPv2CertManagerIntegration with cmpv2Enabled flag
Issue-ID: OOM-2744
Signed-off-by: Piotr Marcinkiewicz <piotr.marcinkiewicz@nokia.com>
Change-Id: I8c818fcf64a029552c8833f68b6ae95fad379c8d
|
|
|
|
Mount app-config-input configmap directly to app container.
Signed-off-by: Bartosz Gardziejewski <bartosz.gardziejewski@nokia.com>
Change-Id: I50d80adcb87e86241876c9bab669739cb3d9c10c
Issue-ID: DCAEGEN2-2630
|
|
Updates:
- Add microservice specific flag to determine if CMPv2
should be used
- Add function to check if CMPv2 parts should be included
Signed-off-by: Remigiusz Janeczek <remigiusz.janeczek@nokia.com>
Issue-ID: DCAEGEN2-2630
Change-Id: If81c50c6029aafef40fa91c5295ad8ad24f953d3
|
|
|
|
Enhance the DCAE microservice deployment template to
generate a volume mount and a volume for configMaps
whose names and mount paths are specified in the
microservice's values.yaml.
Issue-ID: DCAEGEN2-2690
Signed-off-by: Jack Lucas <jflos@sonoris.net>
Change-Id: Id2fbce07ab8199f4566b34a99df540f16fd937b0
|
|
- Add mounting certificates in pem format.
- Add comment description to certificates in dcae values
Issue-ID: DCAEGEN2-2688
Signed-off-by: Piotr Marcinkiewicz <piotr.marcinkiewicz@nokia.com>
Change-Id: I546292c33e25e36376b98d42e08a3c4ffa95de64
|
|
Add support for CMPv2 certificates in dcaegen2-services-common
template
Add CMPv2 certificates to HV-VES and VES charts
Issue-ID: DCAEGEN2-2688
Signed-off-by: Remigiusz Janeczek <remigiusz.janeczek@nokia.com>
Change-Id: I6ade2c24f240872e78df92ca31b30c779f86e38b
|
|
Template enhanced to include policy sidecar
support for DCAE components
Issue-ID: DCAEGEN2-2689
Change-Id: Ida7eeadbcc2df2af9579fdda939d0427a7963b63
Signed-off-by: vv770d <vv770d@att.com>
|
|
|
|
Mount volume containing app configuration to all deployments in dcaegen2
Signed-off-by: Bartosz Gardziejewski <bartosz.gardziejewski@nokia.com>
Issue-ID: DCAEGEN2-2692
Change-Id: I414c44633f7dd1b0a37b135e5cbc2f2111494a0b
|
|
Enhances the dcaegen2-services-common deployment template to
allow setting environment variables for a DCAE microservice
container from a secret
Issue-ID: DCAEGEN2-2687
Change-Id: I8452cd1f52e941c0a3ebd15eb39b1eecc97a0ded
Signed-off-by: Jack Lucas <jflos@sonoris.net>
[Fail the deployment if one of required params is not provided]
Signed-off-by: Krzysztof Opasiak <k.opasiak@samsung.com>
|
|
Updating the documentation and bumping version to 8.0.0
Issue-ID: OOM-1
Signed-off-by: Sylvain Desbureaux <sylvain.desbureaux@orange.com>
Change-Id: I6f942f1466fed64264c44fb8fc0e1ffc93a98f18
|
|
Deploy DCAE microservices using Helm instead of having
the DCAE bootstrap container deploy them using Cloudify.
Charts for the microservices are found under
oom/kubernetes/dcaegen2-services.
Issue-ID: DCAEGEN2-2615
Issue-ID: DCAEGEN2-2617
Signed-off-by: Jack Lucas <jflos@sonoris.net>
Change-Id: I22d88987ae8e21b3c08f31f13ffda98967d13297
[Use common secret template for secrets]
Signed-off-by: Krzysztof Opasiak <k.opasiak@samsung.com>
|