aboutsummaryrefslogtreecommitdiffstats
path: root/kubernetes/common/postgres/charts
diff options
context:
space:
mode:
Diffstat (limited to 'kubernetes/common/postgres/charts')
-rw-r--r--kubernetes/common/postgres/charts/pgpool/Chart.yaml18
-rw-r--r--kubernetes/common/postgres/charts/pgpool/configs/pgpool.conf677
-rw-r--r--kubernetes/common/postgres/charts/pgpool/configs/pool_hba.conf68
-rw-r--r--kubernetes/common/postgres/charts/pgpool/requirements.yaml18
-rwxr-xr-xkubernetes/common/postgres/charts/pgpool/templates/configmap.yaml26
-rw-r--r--kubernetes/common/postgres/charts/pgpool/templates/deployment.yaml100
-rw-r--r--kubernetes/common/postgres/charts/pgpool/templates/secrets.yaml28
-rw-r--r--kubernetes/common/postgres/charts/pgpool/templates/service.yaml26
-rw-r--r--kubernetes/common/postgres/charts/pgpool/values.yaml45
9 files changed, 0 insertions, 1006 deletions
diff --git a/kubernetes/common/postgres/charts/pgpool/Chart.yaml b/kubernetes/common/postgres/charts/pgpool/Chart.yaml
deleted file mode 100644
index e2818139fa..0000000000
--- a/kubernetes/common/postgres/charts/pgpool/Chart.yaml
+++ /dev/null
@@ -1,18 +0,0 @@
-# Copyright © 2018 Amdocs, AT&T, Bell Canada
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-apiVersion: v1
-description: ONAP Postgres Server
-name: pgpool
-version: 5.0.0
diff --git a/kubernetes/common/postgres/charts/pgpool/configs/pgpool.conf b/kubernetes/common/postgres/charts/pgpool/configs/pgpool.conf
deleted file mode 100644
index f335174f40..0000000000
--- a/kubernetes/common/postgres/charts/pgpool/configs/pgpool.conf
+++ /dev/null
@@ -1,677 +0,0 @@
-# ----------------------------
-# pgPool-II configuration file a custom version
-# ----------------------------
-#
-# This file consists of lines of the form:
-#
-# name = value
-#
-# Whitespace may be used. Comments are introduced with "#" anywhere on a line.
-# The complete list of parameter names and allowed values can be found in the
-# pgPool-II documentation.
-#
-# This file is read on server startup and when the server receives a SIGHUP
-# signal. If you edit the file on a running system, you have to SIGHUP the
-# server for the changes to take effect, or use "pgpool reload". Some
-# parameters, which are marked below, require a server shutdown and restart to
-# take effect.
-#
-
-
-#------------------------------------------------------------------------------
-# CONNECTIONS
-#------------------------------------------------------------------------------
-
-# - pgpool Connection Settings -
-
-listen_addresses = '*'
- # Host name or IP address to listen on:
- # '*' for all, '' for no TCP/IP connections
- # (change requires restart)
-#port = 9999
-port = 5432
- # Port number
- # (change requires restart)
-socket_dir = '/tmp'
- # Unix domain socket path
- # The Debian package defaults to
- # /var/run/postgresql
- # (change requires restart)
-
-
-# - pgpool Communication Manager Connection Settings -
-
-pcp_port = 9898
- # Port number for pcp
- # (change requires restart)
-pcp_socket_dir = '/tmp'
- # Unix domain socket path for pcp
- # The Debian package defaults to
- # /var/run/postgresql
- # (change requires restart)
-
-# - Backend Connection Settings -
-
-backend_hostname0 = '{{.Values.container.name.primary}}'
-backend_port0 = 5432
-backend_weight0= 1
-backend_flag0= 'DISALLOW_TO_FAILOVER'
-
-backend_hostname1 = '{{.Values.container.name.replica}}'
-backend_port1 = 5432
-backend_weight1= 1
-backend_flag1= 'DISALLOW_TO_FAILOVER'
-
-#backend_hostname0 = 'master'
- # Host name or IP address to connect to for backend 0
-#backend_port0 = 5432
- # Port number for backend 0
-#backend_weight0 = 1
- # Weight for backend 0 (only in load balancing mode)
-#backend_data_directory0 = '/data'
- # Data directory for backend 0
-#backend_flag0 = 'ALLOW_TO_FAILOVER'
- # Controls various backend behavior
- # ALLOW_TO_FAILOVER or DISALLOW_TO_FAILOVER
-#backend_hostname1 = 'standby'
-#backend_port1 = 5432
-#backend_weight1 = 1
-#backend_data_directory1 = '/data1'
-#backend_flag1 = 'ALLOW_TO_FAILOVER'
-
-# - Authentication -
-
-enable_pool_hba = on
- # Use pool_hba.conf for client authentication
-pool_passwd = 'pool_passwd'
- # File name of pool_passwd for md5 authentication.
- # "" disables pool_passwd.
- # (change requires restart)
-authentication_timeout = 60
- # Delay in seconds to complete client authentication
- # 0 means no timeout.
-
-# - SSL Connections -
-
-ssl = off
- # Enable SSL support
- # (change requires restart)
-#ssl_key = './server.key'
- # Path to the SSL private key file
- # (change requires restart)
-#ssl_cert = './server.cert'
- # Path to the SSL public certificate file
- # (change requires restart)
-#ssl_ca_cert = ''
- # Path to a single PEM format file
- # containing CA root certificate(s)
- # (change requires restart)
-#ssl_ca_cert_dir = ''
- # Directory containing CA root certificate(s)
- # (change requires restart)
-
-
-#------------------------------------------------------------------------------
-# POOLS
-#------------------------------------------------------------------------------
-
-# - Pool size -
-
-num_init_children = 5
- # Number of pools
- # (change requires restart)
-max_pool = 1
- # Number of connections per pool
- # (change requires restart)
-
-# - Life time -
-
-child_life_time = 300
- # Pool exits after being idle for this many seconds
-child_max_connections = 0
- # Pool exits after receiving that many connections
- # 0 means no exit
-connection_life_time = 0
- # Connection to backend closes after being idle for this many seconds
- # 0 means no close
-client_idle_limit = 0
- # Client is disconnected after being idle for that many seconds
- # (even inside an explicit transactions!)
- # 0 means no disconnection
-
-
-#------------------------------------------------------------------------------
-# LOGS
-#------------------------------------------------------------------------------
-
-# - Where to log -
-
-log_destination = 'stderr'
- # Where to log
- # Valid values are combinations of stderr,
- # and syslog. Default to stderr.
-
-# - What to log -
-
-print_timestamp = on
- # Print timestamp on each line
- # (change requires restart)
-
-log_connections = on
- # Log connections
-log_hostname = on
- # Hostname will be shown in ps status
- # and in logs if connections are logged
-log_statement = on
- # Log all statements
-log_per_node_statement = off
- # Log all statements
- # with node and backend informations
-log_standby_delay = 'if_over_threshold'
- # Log standby delay
- # Valid values are combinations of always,
- # if_over_threshold, none
-
-# - Syslog specific -
-
-syslog_facility = 'LOCAL0'
- # Syslog local facility. Default to LOCAL0
-syslog_ident = 'pgpool'
- # Syslog program identification string
- # Default to 'pgpool'
-
-# - Debug -
-
-debug_level = 1
- # Debug message verbosity level
- # 0 means no message, 1 or more mean verbose
-
-
-#------------------------------------------------------------------------------
-# FILE LOCATIONS
-#------------------------------------------------------------------------------
-
-pid_file_name = '/tmp/pgpool.pid'
- # PID file name
- # (change requires restart)
-logdir = '/tmp'
- # Directory of pgPool status file
- # (change requires restart)
-
-
-#------------------------------------------------------------------------------
-# CONNECTION POOLING
-#------------------------------------------------------------------------------
-
-connection_cache = off
- # Activate connection pools
- # (change requires restart)
-
- # Semicolon separated list of queries
- # to be issued at the end of a session
- # The default is for 8.3 and later
-reset_query_list = 'ABORT; DISCARD ALL'
- # The following one is for 8.2 and before
-#reset_query_list = 'ABORT; RESET ALL; SET SESSION AUTHORIZATION DEFAULT'
-
-
-#------------------------------------------------------------------------------
-# REPLICATION MODE
-#------------------------------------------------------------------------------
-
-replication_mode = off
- # Activate replication mode
- # (change requires restart)
-replicate_select = off
- # Replicate SELECT statements
- # when in replication or parallel mode
- # replicate_select is higher priority than
- # load_balance_mode.
-
-insert_lock = off
- # Automatically locks a dummy row or a table
- # with INSERT statements to keep SERIAL data
- # consistency
- # Without SERIAL, no lock will be issued
-lobj_lock_table = ''
- # When rewriting lo_creat command in
- # replication mode, specify table name to
- # lock
-
-# - Degenerate handling -
-
-replication_stop_on_mismatch = off
- # On disagreement with the packet kind
- # sent from backend, degenerate the node
- # which is most likely "minority"
- # If off, just force to exit this session
-
-failover_if_affected_tuples_mismatch = off
- # On disagreement with the number of affected
- # tuples in UPDATE/DELETE queries, then
- # degenerate the node which is most likely
- # "minority".
- # If off, just abort the transaction to
- # keep the consistency
-
-
-#------------------------------------------------------------------------------
-# LOAD BALANCING MODE
-#------------------------------------------------------------------------------
-
-load_balance_mode = on
- # Activate load balancing mode
- # (change requires restart)
-ignore_leading_white_space = on
- # Ignore leading white spaces of each query
-white_function_list = ''
- # Comma separated list of function names
- # that don't write to database
- # Regexp are accepted
-black_function_list = 'currval,lastval,nextval,setval'
- # Comma separated list of function names
- # that write to database
- # Regexp are accepted
-
-
-#------------------------------------------------------------------------------
-# MASTER/SLAVE MODE
-#------------------------------------------------------------------------------
-
-master_slave_mode = on
- # Activate master/slave mode
- # (change requires restart)
-master_slave_sub_mode = 'stream'
- # Master/slave sub mode
- # Valid values are combinations slony or
- # stream. Default is slony.
- # (change requires restart)
-
-# - Streaming -
-
-sr_check_period = 10
- # Streaming replication check period
- # Disabled (0) by default
-sr_check_user = '{{.Values.credentials.pgusername}}'
- # Streaming replication check user
- # This is neccessary even if you disable streaming
- # replication delay check by sr_check_period = 0
-sr_check_password = '{{.Values.credentials.pgpassword}}'
- # Password for streaming replication check user
-delay_threshold = 10000000
- # Threshold before not dispatching query to standby node
- # Unit is in bytes
- # Disabled (0) by default
-
-# - Special commands -
-
-follow_master_command = ''
- # Executes this command after master failover
- # Special values:
- # %d = node id
- # %h = host name
- # %p = port number
- # %D = database cluster path
- # %m = new master node id
- # %H = hostname of the new master node
- # %M = old master node id
- # %P = old primary node id
- # %r = new master port number
- # %R = new master database cluster path
- # %% = '%' character
-
-
-#------------------------------------------------------------------------------
-# PARALLEL MODE
-#------------------------------------------------------------------------------
-
-parallel_mode = off
- # Activates parallel query mode
- # (change requires restart)
-pgpool2_hostname = ''
- # Set pgpool2 hostname
- # (change requires restart)
-
-# - System DB info -
-
-#system_db_hostname = 'localhost'
- # (change requires restart)
-#system_db_port = 5432
- # (change requires restart)
-#system_db_dbname = 'pgpool'
- # (change requires restart)
-#system_db_schema = 'pgpool_catalog'
- # (change requires restart)
-#system_db_user = 'pgpool'
- # (change requires restart)
-#system_db_password = ''
- # (change requires restart)
-
-
-#------------------------------------------------------------------------------
-# HEALTH CHECK
-#------------------------------------------------------------------------------
-
-health_check_period = 20
- # Health check period
- # Disabled (0) by default
-health_check_timeout = 10
- # Health check timeout
- # 0 means no timeout
-health_check_user = '{{.Values.credentials.pgusername}}'
- # Health check user
-health_check_password = '{{.Values.credentials.pgpassword}}'
- # Password for health check user
-health_check_max_retries = 3
-connect_timeout = 10000 # Timeout value in milliseconds before giving up to connect to backend.
-
- # Maximum number of times to retry a failed health check before giving up.
-health_check_retry_delay = 1
- # Amount of time to wait (in seconds) between retries.
-
-
-#------------------------------------------------------------------------------
-# FAILOVER AND FAILBACK
-#------------------------------------------------------------------------------
-
-failover_command = ''
- # Executes this command at failover
- # Special values:
- # %d = node id
- # %h = host name
- # %p = port number
- # %D = database cluster path
- # %m = new master node id
- # %H = hostname of the new master node
- # %M = old master node id
- # %P = old primary node id
- # %r = new master port number
- # %R = new master database cluster path
- # %% = '%' character
-failback_command = ''
- # Executes this command at failback.
- # Special values:
- # %d = node id
- # %h = host name
- # %p = port number
- # %D = database cluster path
- # %m = new master node id
- # %H = hostname of the new master node
- # %M = old master node id
- # %P = old primary node id
- # %r = new master port number
- # %R = new master database cluster path
- # %% = '%' character
-
-fail_over_on_backend_error = off
- # Initiates failover when reading/writing to the
- # backend communication socket fails
- # If set to off, pgpool will report an
- # error and disconnect the session.
-
-search_primary_node_timeout = 10
- # Timeout in seconds to search for the
- # primary node when a failover occurs.
- # 0 means no timeout, keep searching
- # for a primary node forever.
-
-#------------------------------------------------------------------------------
-# ONLINE RECOVERY
-#------------------------------------------------------------------------------
-
-recovery_user = '{{.Values.credentials.pgusername}}'
- # Online recovery user
-recovery_password = '{{.Values.credentials.pgpassword}}'
- # Online recovery password
-recovery_1st_stage_command = ''
- # Executes a command in first stage
-recovery_2nd_stage_command = ''
- # Executes a command in second stage
-recovery_timeout = 90
- # Timeout in seconds to wait for the
- # recovering node's postmaster to start up
- # 0 means no wait
-client_idle_limit_in_recovery = 0
- # Client is disconnected after being idle
- # for that many seconds in the second stage
- # of online recovery
- # 0 means no disconnection
- # -1 means immediate disconnection
-
-
-#------------------------------------------------------------------------------
-# WATCHDOG
-#------------------------------------------------------------------------------
-
-# - Enabling -
-
-use_watchdog = off
- # Activates watchdog
- # (change requires restart)
-
-# -Connection to up stream servers -
-
-trusted_servers = ''
- # trusted server list which are used
- # to confirm network connection
- # (hostA,hostB,hostC,...)
- # (change requires restart)
-ping_path = '/bin'
- # ping command path
- # (change requires restart)
-
-# - Watchdog communication Settings -
-
-wd_hostname = ''
- # Host name or IP address of this watchdog
- # (change requires restart)
-wd_port = 9000
- # port number for watchdog service
- # (change requires restart)
-wd_authkey = ''
- # Authentication key for watchdog communication
- # (change requires restart)
-
-# - Virtual IP control Setting -
-
-delegate_IP = ''
- # delegate IP address
- # If this is empty, virtual IP never bring up.
- # (change requires restart)
-ifconfig_path = '/sbin'
- # ifconfig command path
- # (change requires restart)
-if_up_cmd = 'ifconfig eth0:0 inet $_IP_$ netmask 255.255.255.0'
- # startup delegate IP command
- # (change requires restart)
-if_down_cmd = 'ifconfig eth0:0 down'
- # shutdown delegate IP command
- # (change requires restart)
-
-arping_path = '/usr/sbin' # arping command path
- # (change requires restart)
-
-arping_cmd = 'arping -U $_IP_$ -w 1'
- # arping command
- # (change requires restart)
-
-# - Behaivor on escalation Setting -
-
-clear_memqcache_on_escalation = on
- # Clear all the query cache on shared memory
- # when standby pgpool escalate to active pgpool
- # (= virtual IP holder).
- # This should be off if client connects to pgpool
- # not using virtual IP.
- # (change requires restart)
-wd_escalation_command = ''
- # Executes this command at escalation on new active pgpool.
- # (change requires restart)
-
-# - Lifecheck Setting -
-
-# -- common --
-
-wd_lifecheck_method = 'heartbeat'
- # Method of watchdog lifecheck ('heartbeat' or 'query')
- # (change requires restart)
-wd_interval = 10
- # lifecheck interval (sec) > 0
- # (change requires restart)
-
-# -- heartbeat mode --
-
-wd_heartbeat_port = 9694
- # Port number for receiving heartbeat signal
- # (change requires restart)
-wd_heartbeat_keepalive = 2
- # Interval time of sending heartbeat signal (sec)
- # (change requires restart)
-wd_heartbeat_deadtime = 30
- # Deadtime interval for heartbeat signal (sec)
- # (change requires restart)
-heartbeat_destination0 = 'host0_ip1'
- # Host name or IP address of destination 0
- # for sending heartbeat signal.
- # (change requires restart)
-heartbeat_destination_port0 = 9694
- # Port number of destination 0 for sending
- # heartbeat signal. Usually this is the
- # same as wd_heartbeat_port.
- # (change requires restart)
-heartbeat_device0 = ''
- # Name of NIC device (such like 'eth0')
- # used for sending/receiving heartbeat
- # signal to/from destination 0.
- # This works only when this is not empty
- # and pgpool has root privilege.
- # (change requires restart)
-
-#heartbeat_destination1 = 'host0_ip2'
-#heartbeat_destination_port1 = 9694
-#heartbeat_device1 = ''
-
-# -- query mode --
-
-wd_life_point = 3
- # lifecheck retry times
- # (change requires restart)
-wd_lifecheck_query = 'SELECT 1'
- # lifecheck query to pgpool from watchdog
- # (change requires restart)
-wd_lifecheck_dbname = 'template1'
- # Database name connected for lifecheck
- # (change requires restart)
-wd_lifecheck_user = 'nobody'
- # watchdog user monitoring pgpools in lifecheck
- # (change requires restart)
-wd_lifecheck_password = ''
- # Password for watchdog user in lifecheck
- # (change requires restart)
-
-# - Other pgpool Connection Settings -
-
-#other_pgpool_hostname0 = 'host0'
- # Host name or IP address to connect to for other pgpool 0
- # (change requires restart)
-#other_pgpool_port0 = 5432
- # Port number for othet pgpool 0
- # (change requires restart)
-#other_wd_port0 = 9000
- # Port number for othet watchdog 0
- # (change requires restart)
-#other_pgpool_hostname1 = 'host1'
-#other_pgpool_port1 = 5432
-#other_wd_port1 = 9000
-
-
-#------------------------------------------------------------------------------
-# OTHERS
-#------------------------------------------------------------------------------
-relcache_expire = 0
- # Life time of relation cache in seconds.
- # 0 means no cache expiration(the default).
- # The relation cache is used for cache the
- # query result against PostgreSQL system
- # catalog to obtain various information
- # including table structures or if it's a
- # temporary table or not. The cache is
- # maintained in a pgpool child local memory
- # and being kept as long as it survives.
- # If someone modify the table by using
- # ALTER TABLE or some such, the relcache is
- # not consistent anymore.
- # For this purpose, cache_expiration
- # controls the life time of the cache.
-relcache_size = 256
- # Number of relation cache
- # entry. If you see frequently:
- # "pool_search_relcache: cache replacement happend"
- # in the pgpool log, you might want to increate this number.
-
-check_temp_table = on
- # If on, enable temporary table check in SELECT statements.
- # This initiates queries against system catalog of primary/master
- # thus increases load of master.
- # If you are absolutely sure that your system never uses temporary tables
- # and you want to save access to primary/master, you could turn this off.
- # Default is on.
-
-
-#------------------------------------------------------------------------------
-# ON MEMORY QUERY MEMORY CACHE
-#------------------------------------------------------------------------------
-memory_cache_enabled = off
- # If on, use the memory cache functionality, off by default
-memqcache_method = 'shmem'
- # Cache storage method. either 'shmem'(shared memory) or
- # 'memcached'. 'shmem' by default
- # (change requires restart)
-memqcache_memcached_host = 'localhost'
- # Memcached host name or IP address. Mandatory if
- # memqcache_method = 'memcached'.
- # Defaults to localhost.
- # (change requires restart)
-memqcache_memcached_port = 11211
- # Memcached port number. Mondatory if memqcache_method = 'memcached'.
- # Defaults to 11211.
- # (change requires restart)
-memqcache_total_size = 67108864
- # Total memory size in bytes for storing memory cache.
- # Mandatory if memqcache_method = 'shmem'.
- # Defaults to 64MB.
- # (change requires restart)
-memqcache_max_num_cache = 1000000
- # Total number of cache entries. Mandatory
- # if memqcache_method = 'shmem'.
- # Each cache entry consumes 48 bytes on shared memory.
- # Defaults to 1,000,000(45.8MB).
- # (change requires restart)
-memqcache_expire = 0
- # Memory cache entry life time specified in seconds.
- # 0 means infinite life time. 0 by default.
- # (change requires restart)
-memqcache_auto_cache_invalidation = on
- # If on, invalidation of query cache is triggered by corresponding
- # DDL/DML/DCL(and memqcache_expire). If off, it is only triggered
- # by memqcache_expire. on by default.
- # (change requires restart)
-memqcache_maxcache = 409600
- # Maximum SELECT result size in bytes.
- # Must be smaller than memqcache_cache_block_size. Defaults to 400KB.
- # (change requires restart)
-memqcache_cache_block_size = 1048576
- # Cache block size in bytes. Mandatory if memqcache_method = 'shmem'.
- # Defaults to 1MB.
- # (change requires restart)
-memqcache_oiddir = '/var/log/pgpool/oiddir'
- # Temporary work directory to record table oids
- # (change requires restart)
-white_memqcache_table_list = ''
- # Comma separated list of table names to memcache
- # that don't write to database
- # Regexp are accepted
-black_memqcache_table_list = ''
- # Comma separated list of table names not to memcache
- # that don't write to database
- # Regexp are accepted
diff --git a/kubernetes/common/postgres/charts/pgpool/configs/pool_hba.conf b/kubernetes/common/postgres/charts/pgpool/configs/pool_hba.conf
deleted file mode 100644
index 580185c6f0..0000000000
--- a/kubernetes/common/postgres/charts/pgpool/configs/pool_hba.conf
+++ /dev/null
@@ -1,68 +0,0 @@
-# pgpool Client Authentication Configuration File a custom version
-# ===============================================
-#
-# The format rule in this file follows the rules in the PostgreSQL
-# Administrator's Guide. Refer to chapter "Client Authentication" for a
-# complete description. A short synopsis follows.
-#
-# This file controls: which hosts are allowed to connect, how clients
-# are authenticated, which user names they can use, which databases they
-# can access. Records take one of these forms:
-#
-# local DATABASE USER METHOD [OPTION]
-# host DATABASE USER CIDR-ADDRESS METHOD [OPTION]
-#
-# (The uppercase items must be replaced by actual values.)
-#
-# The first field is the connection type: "local" is a Unix-domain
-# socket, "host" is either a plain or SSL-encrypted TCP/IP socket.
-#
-# DATABASE can be "all", "sameuser", a database name, or a comma-separated
-# list thereof. Note that "samegroup" like in PostgreSQL's pg_hba.conf
-# file is not supported, since pgpool does not know which group a user
-# belongs to. Also note that the database specified here may not exist in
-# the backend PostgreSQL. pgpool will authenticate based on the database's
-# name, not based on whether it exists or not.
-#
-# USER can be "all", a user name, or a comma-separated list thereof. In
-# both the DATABASE and USER fields you can also write a file name prefixed
-# with "@" to include names from a separate file. Note that a group name
-# prefixed with "+" like in PostgreSQL's pg_hba.conf file is not supported
-# because of the same reason as "samegroup" token. Also note that a user
-# name specified here may not exist in the backend PostgreSQL. pgpool will
-# authenticate based on the user's name, not based on whether he/she exists.
-#
-# CIDR-ADDRESS specifies the set of hosts the record matches.
-# It is made up of an IP address and a CIDR mask that is an integer
-# (between 0 and 32 (IPv4) that specifies the number of significant bits in
-# the mask. Alternatively, you can write an IP address and netmask in
-# separate columns to specify the set of hosts.
-#
-# METHOD can be "trust", "reject", "md5" or "pam". Note that "pam" sends passwords
-# in clear text.
-#
-# OPTION is the name of the PAM service. Default service name is "pgpool"
-#
-# Database and user names containing spaces, commas, quotes and other special
-# characters must be quoted. Quoting one of the keywords "all" or "sameuser"
-# makes the name lose its special character, and just match a database or
-# username with that name.
-#
-# This file is read on pgpool startup. If you edit the file on a running
-# system, you have to restart the pgpool for the changes to take effect.
-
-# Put your actual configuration here
-# ----------------------------------
-#
-# If you want to allow non-local connections, you need to add more
-# "host" records. In that case you will also need to make pgpool listen
-# on a non-local interface via the listen_addresses configuration parameter.
-#
-
-# TYPE DATABASE USER CIDR-ADDRESS METHOD
-
-# "local" is for Unix domain socket connections only
-#local all all trust
-# IPv4 local connections:
-host all all 0.0.0.0/0 md5
-
diff --git a/kubernetes/common/postgres/charts/pgpool/requirements.yaml b/kubernetes/common/postgres/charts/pgpool/requirements.yaml
deleted file mode 100644
index 5b097f3ab7..0000000000
--- a/kubernetes/common/postgres/charts/pgpool/requirements.yaml
+++ /dev/null
@@ -1,18 +0,0 @@
-# Copyright © 2018 Amdocs, AT&T, Bell Canada
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-dependencies:
- - name: common
- version: ~5.x-0
- repository: '@local'
diff --git a/kubernetes/common/postgres/charts/pgpool/templates/configmap.yaml b/kubernetes/common/postgres/charts/pgpool/templates/configmap.yaml
deleted file mode 100755
index 099c8dd12e..0000000000
--- a/kubernetes/common/postgres/charts/pgpool/templates/configmap.yaml
+++ /dev/null
@@ -1,26 +0,0 @@
-# Copyright © 2017 Amdocs, Bell Canada
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-apiVersion: v1
-kind: ConfigMap
-metadata:
- name: {{ include "common.fullname" . }}-pgpool-configmap
- namespace: {{ include "common.namespace" . }}
- labels:
- app: {{ include "common.name" . }}
- chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
- release: {{ include "common.release" . }}
- heritage: {{ .Release.Service }}
-data:
-{{ tpl (.Files.Glob "configs/*").AsConfig . | indent 2 }}
diff --git a/kubernetes/common/postgres/charts/pgpool/templates/deployment.yaml b/kubernetes/common/postgres/charts/pgpool/templates/deployment.yaml
deleted file mode 100644
index c24916ad22..0000000000
--- a/kubernetes/common/postgres/charts/pgpool/templates/deployment.yaml
+++ /dev/null
@@ -1,100 +0,0 @@
-{{/*
-# Copyright © 2018 Amdocs, AT&T, Bell Canada
-# #
-# # Licensed under the Apache License, Version 2.0 (the "License");
-# # you may not use this file except in compliance with the License.
-# # You may obtain a copy of the License at
-# #
-# # http://www.apache.org/licenses/LICENSE-2.0
-# #
-# # Unless required by applicable law or agreed to in writing, software
-# # distributed under the License is distributed on an "AS IS" BASIS,
-# # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# # See the License for the specific language governing permissions and
-# # limitations under the License.
-*/}}
-kind: Deployment
-apiVersion: extensions/v1beta1
-metadata:
- name: {{ include "common.fullname" . }}
- namespace: {{ include "common.namespace" . }}
- labels:
- app: {{ include "common.name" . }}
- chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
- release: {{ include "common.release" . }}
- heritage: {{ .Release.Service }}
-spec:
- replicas: 2
- template:
- metadata:
- labels:
- app: {{ include "common.name" . }}
- release: {{ include "common.release" . }}
- spec:
- initContainers:
- - name: {{ include "common.name" . }}-job
- image: "{{.Values.repository}}/{{.Values.image}}"
- imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
- volumeMounts:
- - name: pgpool-pgconf
- mountPath: /pgconf/pgpoolconfigdir
- readOnly: false
- - name: pgpool-pgconf-static
- mountPath: /configdir/
- readOnly: false
- command:
- - /bin/sh
- args:
- - -c
- - |
- cp /configdir/pgpool.conf /pgconf/pgpoolconfigdir/
- cp /configdir/pool_hba.conf /pgconf/pgpoolconfigdir/
- pg_md5 -f /pgconf/pgpoolconfigdir/pgpool.conf --md5auth --username=${PG_USER} ${PG_PASSWORD}
- env:
- - name: PG_PASSWORD
- valueFrom:
- secretKeyRef:
- name: {{ template "common.fullname" . }}
- key: db-user-password
- - name: PG_USER
- value: {{ index .Values.credentials.pgusername }}
- containers:
- - image: "{{.Values.repository}}/{{.Values.image}}"
- imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
- name: {{ include "common.name" . }}
- env:
- - name: PG_PRIMARY_SERVICE_NAME
- value: {{.Values.container.name.primary}}
- - name: PG_REPLICA_SERVICE_NAME
- value: {{.Values.container.name.replica}}
- - name: PG_USERNAME
- value: {{.Values.credentials.pgusername}}
- - name: PG_PASSWORD
- valueFrom:
- secretKeyRef:
- name: {{ template "common.fullname" . }}
- key: db-user-password
- ports:
- - containerPort: 5432
- name: pgpool
- protocol: TCP
- readinessProbe:
- tcpSocket:
- port: 5432
- initialDelaySeconds: 20
- periodSeconds: 10
- livenessProbe:
- tcpSocket:
- port: 5432
- initialDelaySeconds: 15
- periodSeconds: 20
- volumeMounts:
- - name: pgpool-pgconf
- mountPath: /pgconf/pgpoolconfigdir
- readOnly: false
- volumes:
- - name: pgpool-pgconf
- emptyDir: {}
- - name: pgpool-pgconf-static
- configMap:
- name: {{ include "common.fullname" . }}-pgpool-configmap
diff --git a/kubernetes/common/postgres/charts/pgpool/templates/secrets.yaml b/kubernetes/common/postgres/charts/pgpool/templates/secrets.yaml
deleted file mode 100644
index 3b89371ad4..0000000000
--- a/kubernetes/common/postgres/charts/pgpool/templates/secrets.yaml
+++ /dev/null
@@ -1,28 +0,0 @@
-# Copyright © 2018 Amdocs, Bell Canada
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-apiVersion: v1
-kind: Secret
-metadata:
- name: {{ include "common.fullname" . }}
- namespace: {{ include "common.namespace" . }}
- labels:
- app: {{ include "common.name" . }}
- chart: "{{ .Chart.Name }}-{{ .Chart.Version }}"
- release: "{{ include "common.release" . }}"
- heritage: "{{ .Release.Service }}"
-type: Opaque
-data:
- db-user-password: {{ default "" .Values.credentials.pgpassword | b64enc | quote }}
-
diff --git a/kubernetes/common/postgres/charts/pgpool/templates/service.yaml b/kubernetes/common/postgres/charts/pgpool/templates/service.yaml
deleted file mode 100644
index 696b22a80d..0000000000
--- a/kubernetes/common/postgres/charts/pgpool/templates/service.yaml
+++ /dev/null
@@ -1,26 +0,0 @@
-apiVersion: v1
-kind: Service
-metadata:
- name: {{ .Values.service.name }}
- namespace: {{ include "common.namespace" . }}
- labels:
- app: {{ include "common.name" . }}
- chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
- release: {{ include "common.release" . }}
- heritage: {{ .Release.Service }}
- annotations:
-spec:
- type: {{ .Values.service.type }}
- ports:
- {{if eq .Values.service.type "NodePort" -}}
- - port: {{ .Values.service.externalPort }}
- nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
- name: {{ .Values.service.portName }}
- {{- else -}}
- - port: {{ .Values.service.externalPort }}
- targetPort: {{ .Values.service.internalPort }}
- name: {{ .Values.service.portName }}
- {{- end}}
- selector:
- app: {{ include "common.name" . }}
- release: {{ include "common.release" . }}
diff --git a/kubernetes/common/postgres/charts/pgpool/values.yaml b/kubernetes/common/postgres/charts/pgpool/values.yaml
deleted file mode 100644
index 8ceff8f964..0000000000
--- a/kubernetes/common/postgres/charts/pgpool/values.yaml
+++ /dev/null
@@ -1,45 +0,0 @@
-# Copyright © 2018 Amdocs, AT&T, Bell Canada
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-#################################################################
-# Global configuration defaults.
-#################################################################
-global:
- nodePortPrefix: 302
- persistence: {}
- readinessRepository: oomk8s
- readinessImage: readiness-check:2.0.0
-
-#################################################################
-# Application configuration defaults.
-#################################################################
-# application image
-repository: crunchydata
-image: crunchy-pgpool:centos7-10.4-2.0.0
-pullPolicy: Always
-
-container:
- port: 5432
- name:
- primary: pgset-primary
- replica: pgset-replica
-credentials:
- pgusername: testuser
- pgpassword: password
-service:
- name: pgpool
- portName: tcp-postgres
- type: ClusterIP
- externalPort: 5432
- internalPort: 5432