diff options
Diffstat (limited to 'kubernetes/clamp/charts/mariadb')
13 files changed, 0 insertions, 1172 deletions
diff --git a/kubernetes/clamp/charts/mariadb/Chart.yaml b/kubernetes/clamp/charts/mariadb/Chart.yaml deleted file mode 100644 index eaad8b8440..0000000000 --- a/kubernetes/clamp/charts/mariadb/Chart.yaml +++ /dev/null @@ -1,19 +0,0 @@ -# Copyright © 2017 Amdocs, Bell Canada -# Modifications Copyright © 2018 AT&T -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -apiVersion: v1 -description: MariaDB Service -name: mariadb -version: 6.0.0 diff --git a/kubernetes/clamp/charts/mariadb/NOTES.txt b/kubernetes/clamp/charts/mariadb/NOTES.txt deleted file mode 100644 index 1103affff1..0000000000 --- a/kubernetes/clamp/charts/mariadb/NOTES.txt +++ /dev/null @@ -1,32 +0,0 @@ -# Copyright © 2018 AT&T, Amdocs, Bell Canada Intellectual Property. All rights reserved. -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. -1. Get the application URL by running these commands: -{{- if .Values.ingress.enabled }} -{{- range .Values.ingress.hosts }} - http://{{ . }} -{{- end }} -{{- else if contains "NodePort" .Values.service.type }} - export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.name" . }}) - export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}") - echo http://$NODE_IP:$NODE_PORT -{{- else if contains "LoadBalancer" .Values.service.type }} - NOTE: It may take a few minutes for the LoadBalancer IP to be available. - You can watch the status of by running 'kubectl get svc -w {{ include "common.name" . }}' - export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.name" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}') - echo http://$SERVICE_IP:{{ .Values.service.externalPort }} -{{- else if contains "ClusterIP" .Values.service.type }} - export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ template "common.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}") - echo "Visit http://127.0.0.1:8080 to use your application" - kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }} -{{- end }} diff --git a/kubernetes/clamp/charts/mariadb/resources/config/init/docker-entrypoint.sh b/kubernetes/clamp/charts/mariadb/resources/config/init/docker-entrypoint.sh deleted file mode 100755 index 71f32e2eff..0000000000 --- a/kubernetes/clamp/charts/mariadb/resources/config/init/docker-entrypoint.sh +++ /dev/null @@ -1,198 +0,0 @@ -#!/bin/bash -set -eo pipefail -shopt -s nullglob - -# if command starts with an option, prepend mysqld -if [ "${1:0:1}" = '-' ]; then - set -- mysqld "$@" -fi - -# skip setup if they want an option that stops mysqld -wantHelp= -for arg; do - case "$arg" in - -'?'|--help|--print-defaults|-V|--version) - wantHelp=1 - break - ;; - esac -done - -prepare_password() -{ - echo "$1" | sed -e "s/'/\\\\'/g; s/\"/\\\\\"/g" -} - -# usage: file_env VAR [DEFAULT] -# ie: file_env 'XYZ_DB_PASSWORD' 'example' -# (will allow for "$XYZ_DB_PASSWORD_FILE" to fill in the value of -# "$XYZ_DB_PASSWORD" from a file, especially for Docker's secrets feature) -file_env() { - local var="$1" - local fileVar="${var}_FILE" - local def="${2:-}" - if [ "${!var:-}" ] && [ "${!fileVar:-}" ]; then - echo >&2 "error: both $var and $fileVar are set (but are exclusive)" - exit 1 - fi - local val="$def" - if [ "${!var:-}" ]; then - val="${!var}" - elif [ "${!fileVar:-}" ]; then - val="$(< "${!fileVar}")" - fi - val=`prepare_password $val` - export "$var"="$val" - unset "$fileVar" -} - -_check_config() { - toRun=( "$@" --verbose --help --log-bin-index="$(mktemp -u)" ) - if ! errors="$("${toRun[@]}" 2>&1 >/dev/null)"; then - cat >&2 <<-EOM - - ERROR: mysqld failed while attempting to check config - command was: "${toRun[*]}" - - $errors - EOM - exit 1 - fi -} - -# Fetch value from server config -# We use mysqld --verbose --help instead of my_print_defaults because the -# latter only show values present in config files, and not server defaults -_get_config() { - local conf="$1"; shift - "$@" --verbose --help --log-bin-index="$(mktemp -u)" 2>/dev/null \ - | awk '$1 == "'"$conf"'" && /^[^ \t]/ { sub(/^[^ \t]+[ \t]+/, ""); print; exit }' - # match "datadir /some/path with/spaces in/it here" but not "--xyz=abc\n datadir (xyz)" -} - -# allow the container to be started with `--user` -if [ "$1" = 'mysqld' -a -z "$wantHelp" -a "$(id -u)" = '0' ]; then - _check_config "$@" - DATADIR="$(_get_config 'datadir' "$@")" - mkdir -p "$DATADIR" - find "$DATADIR" \! -user mysql -exec chown mysql '{}' + - exec gosu mysql "$BASH_SOURCE" "$@" -fi - -if [ "$1" = 'mysqld' -a -z "$wantHelp" ]; then - # still need to check config, container may have started with --user - _check_config "$@" - # Get config - DATADIR="$(_get_config 'datadir' "$@")" - - if [ ! -d "$DATADIR/mysql" ]; then - file_env 'MYSQL_ROOT_PASSWORD' - if [ -z "$MYSQL_ROOT_PASSWORD" -a -z "$MYSQL_ALLOW_EMPTY_PASSWORD" -a -z "$MYSQL_RANDOM_ROOT_PASSWORD" ]; then - echo >&2 'error: database is uninitialized and password option is not specified ' - echo >&2 ' You need to specify one of MYSQL_ROOT_PASSWORD, MYSQL_ALLOW_EMPTY_PASSWORD and MYSQL_RANDOM_ROOT_PASSWORD' - exit 1 - fi - - mkdir -p "$DATADIR" - - echo 'Initializing database' - # "Other options are passed to mysqld." (so we pass all "mysqld" arguments directly here) - mysql_install_db --datadir="$DATADIR" --rpm "${@:2}" - echo 'Database initialized' - - SOCKET="$(_get_config 'socket' "$@")" - "$@" --skip-networking --socket="${SOCKET}" & - pid="$!" - - mysql=( mysql --protocol=socket -uroot -hlocalhost --socket="${SOCKET}" ) - - for i in {30..0}; do - if echo 'SELECT 1' | "${mysql[@]}" &> /dev/null; then - break - fi - echo 'MySQL init process in progress...' - sleep 1 - done - if [ "$i" = 0 ]; then - echo >&2 'MySQL init process failed.' - exit 1 - fi - - if [ -z "$MYSQL_INITDB_SKIP_TZINFO" ]; then - # sed is for https://bugs.mysql.com/bug.php?id=20545 - mysql_tzinfo_to_sql /usr/share/zoneinfo | sed 's/Local time zone must be set--see zic manual page/FCTY/' | "${mysql[@]}" mysql - fi - - if [ ! -z "$MYSQL_RANDOM_ROOT_PASSWORD" ]; then - export MYSQL_ROOT_PASSWORD="$(pwgen -1 32)" - echo "GENERATED ROOT PASSWORD: $MYSQL_ROOT_PASSWORD" - fi - - rootCreate= - # default root to listen for connections from anywhere - file_env 'MYSQL_ROOT_HOST' '%' - if [ ! -z "$MYSQL_ROOT_HOST" -a "$MYSQL_ROOT_HOST" != 'localhost' ]; then - # no, we don't care if read finds a terminating character in this heredoc - # https://unix.stackexchange.com/questions/265149/why-is-set-o-errexit-breaking-this-read-heredoc-expression/265151#265151 - read -r -d '' rootCreate <<-EOSQL || true - CREATE USER 'root'@'${MYSQL_ROOT_HOST}' IDENTIFIED BY '${MYSQL_ROOT_PASSWORD}' ; - GRANT ALL ON *.* TO 'root'@'${MYSQL_ROOT_HOST}' WITH GRANT OPTION ; - EOSQL - fi - - "${mysql[@]}" <<-EOSQL - -- What's done in this file shouldn't be replicated - -- or products like mysql-fabric won't work - SET @@SESSION.SQL_LOG_BIN=0; - - DELETE FROM mysql.user WHERE user NOT IN ('mysql.sys', 'mysqlxsys', 'root') OR host NOT IN ('localhost') ; - SET PASSWORD FOR 'root'@'localhost'=PASSWORD('${MYSQL_ROOT_PASSWORD}') ; - GRANT ALL ON *.* TO 'root'@'localhost' WITH GRANT OPTION ; - ${rootCreate} - DROP DATABASE IF EXISTS test ; - FLUSH PRIVILEGES ; - EOSQL - - if [ ! -z "$MYSQL_ROOT_PASSWORD" ]; then - mysql+=( -p"${MYSQL_ROOT_PASSWORD}" ) - fi - - file_env 'MYSQL_DATABASE' - if [ "$MYSQL_DATABASE" ]; then - echo "CREATE DATABASE IF NOT EXISTS \`$MYSQL_DATABASE\` ;" | "${mysql[@]}" - mysql+=( "$MYSQL_DATABASE" ) - fi - - file_env 'MYSQL_USER' - file_env 'MYSQL_PASSWORD' - if [ "$MYSQL_USER" -a "$MYSQL_PASSWORD" ]; then - echo "CREATE USER '$MYSQL_USER'@'%' IDENTIFIED BY '$MYSQL_PASSWORD' ;" | "${mysql[@]}" - - if [ "$MYSQL_DATABASE" ]; then - echo "GRANT ALL ON \`$MYSQL_DATABASE\`.* TO '$MYSQL_USER'@'%' ;" | "${mysql[@]}" - fi - fi - - echo - for f in /docker-entrypoint-initdb.d/*; do - case "$f" in - *.sh) echo "$0: running $f"; . "$f" ;; - *.sql) echo "$0: running $f"; "${mysql[@]}" < "$f"; echo ;; - *.sql.gz) echo "$0: running $f"; gunzip -c "$f" | "${mysql[@]}"; echo ;; - *) echo "$0: ignoring $f" ;; - esac - echo - done - - if ! kill -s TERM "$pid" || ! wait "$pid"; then - echo >&2 'MySQL init process failed.' - exit 1 - fi - - echo - echo 'MySQL init process done. Ready for start up.' - echo - fi -fi - -exec "$@" diff --git a/kubernetes/clamp/charts/mariadb/resources/config/mariadb/conf.d/conf1/my.cnf b/kubernetes/clamp/charts/mariadb/resources/config/mariadb/conf.d/conf1/my.cnf deleted file mode 100644 index 612590cc6b..0000000000 --- a/kubernetes/clamp/charts/mariadb/resources/config/mariadb/conf.d/conf1/my.cnf +++ /dev/null @@ -1,207 +0,0 @@ -# Copyright © 2018 AT&T, Amdocs, Bell Canada Intellectual Property. All rights reserved. -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. -# Example MySQL config file for medium systems. -# -# This is for a system with memory 8G where MySQL plays -# an important part, or systems up to 128M where MySQL is used together with -# other programs (such as a web server) -# -# In this file, you can use all long options that a program supports. -# If you want to know which options a program supports, run the program -# with the "--help" option. - -# The following options will be passed to all MySQL clients -##[client] -##user = root -##port = 3306 -##socket = //opt/app/mysql/mysql.sock - -# Here follows entries for some specific programs - -# The MySQL server -[mysqld] -##performance_schema - -slow_query_log =ON -long_query_time =2 -slow_query_log_file =//var/lib/mysql/slow_query.log -##basedir = //opt/app/mysql/product/mariadb-10.1.11-linux-x86_64 -##datadir = //opt/app/mysql/data -##port = 3306 -##socket = //opt/app/mysql/mysql.sock -skip-external-locking -explicit_defaults_for_timestamp = true -skip-symbolic-links -local-infile = 0 -#ignore_db_dir=lost+found -key_buffer_size = 16M -max_allowed_packet = 4M -table_open_cache = 100 -sort_buffer_size = 512K -net_buffer_length = 8K -read_buffer_size = 256K -read_rnd_buffer_size = 512K -myisam_sort_buffer_size = 8M -max_connections = 500 -lower_case_table_names = 1 -thread_stack = 256K -thread_cache_size = 25 -query_cache_size = 8M -query_cache_type = 0 -query_prealloc_size = 512K -query_cache_limit = 1M - -# Password validation -##plugin-load-add=simple_password_check.so -##simple_password_check_other_characters=0 - -# Audit Log settings -plugin-load-add=server_audit.so -server_audit=FORCE_PLUS_PERMANENT -server_audit_file_path=//var/lib/mysql/audit.log -server_audit_file_rotate_size=50M -server_audit_events=CONNECT,QUERY,TABLE -server_audit_logging=on - -# Don't listen on a TCP/IP port at all. This can be a security enhancement, -# if all processes that need to connect to mysqld run on the same host. -# All interaction with mysqld must be made via Unix sockets or named pipes. -# Note that using this option without enabling named pipes on Windows -# (via the "enable-named-pipe" option) will render mysqld useless! -# -#skip-networking - -# Replication Master Server (default) -# binary logging is required for replication -##log-bin=//var/lib/mysql/mysql-bin - -# binary logging format - mixed recommended -binlog_format=row - -# required unique id between 1 and 2^32 - 1 -# defaults to 1 if master-host is not set -# but will not function as a master if omitted - -# Replication Slave (comment out master section to use this) -# -# To configure this host as a replication slave, you can choose between -# two methods : -# -# 1) Use the CHANGE MASTER TO command (fully described in our manual) - -# the syntax is: -# -# CHANGE MASTER TO MASTER_HOST=<host>, MASTER_PORT=<port>, -# MASTER_USER=<user>, MASTER_PASSWORD=<password> ; -# -# where you replace <host>, <user>, <password> by quoted strings and -# <port> by the master's port number (3306 by default). -# -# Example: -# -# CHANGE MASTER TO MASTER_HOST='125.564.12.1', MASTER_PORT=3306, -# MASTER_USER='joe', MASTER_PASSWORD='secret'; -# -# OR -# -# 2) Set the variables below. However, in case you choose this method, then -# start replication for the first time (even unsuccessfully, for example -# if you mistyped the password in master-password and the slave fails to -# connect), the slave will create a master.info file, and any later -# change in this file to the variables' values below will be ignored and -# overridden by the content of the master.info file, unless you shutdown -# the slave server, delete master.info and restart the slaver server. -# For that reason, you may want to leave the lines below untouched -# (commented) and instead use CHANGE MASTER TO (see above) -# -# required unique id between 2 and 2^32 - 1 -# (and different from the master) -# defaults to 2 if master-host is set -# but will not function as a slave if omitted -#server-id = 2 -# -# The replication master for this slave - required -#master-host = <hostname> -# -# The username the slave will use for authentication when connecting -# to the master - required -#master-user = <username> -# -# The password the slave will authenticate with when connecting to -# the master - required -#master-password = <password> -# -# The port the master is listening on. -# optional - defaults to 3306 -#master-port = <port> -# -# binary logging - not required for slaves, but recommended -#log-bin=mysql-bin - -# Uncomment the following if you are using InnoDB tables -##innodb_data_home_dir = //opt/app/mysql/data -##innodb_data_file_path = ibdata1:20M:autoextend:max:32G -##innodb_log_group_home_dir = //opt/app/mysql/iblogs -# You can set .._buffer_pool_size up to 50 - 80 % -# of RAM but beware of setting memory usage too high -innodb_buffer_pool_size = 128M -#innodb_additional_mem_pool_size = 2M -# Set .._log_file_size to 25 % of buffer pool size -innodb_log_file_size = 10M -innodb_log_files_in_group = 3 -innodb_log_buffer_size = 8M -#innodb_flush_log_at_trx_commit = 1 -innodb_lock_wait_timeout = 50 -innodb_autoextend_increment = 100 -expire_logs_days = 8 -open_files_limit = 2000 -transaction-isolation=READ-COMMITTED -####### Galera parameters ####### -## Galera Provider configuration -wsrep_provider=/usr/lib/galera/libgalera_smm.so -wsrep_provider_options="gcache.size=128M; gcache.page_size=10M" -## Galera Cluster configuration -wsrep_cluster_name="MSO-automated-tests-cluster" -wsrep_cluster_address="gcomm://" -#wsrep_cluster_address="gcomm://mariadb1,mariadb2,mariadb3" -##wsrep_cluster_address="gcomm://192.169.3.184,192.169.3.185,192.169.3.186" -## Galera Synchronization configuration -wsrep_sst_method=rsync -#wsrep_sst_method=xtrabackup-v2 -#wsrep_sst_auth="sstuser:Mon#2o!6" -## Galera Node configuration -wsrep_node_name="mariadb1" -##wsrep_node_address="192.169.3.184" -wsrep_on=OFF -## Status notification -#wsrep_notify_cmd=/opt/app/mysql/bin/wsrep_notify -####### - - -[mysqldump] -quick -max_allowed_packet = 16M - -[mysql] -no-auto-rehash -# Remove the next comment character if you are not familiar with SQL -#safe-updates - -[myisamchk] -key_buffer_size = 20971520 - -##[mysqlhotcopy] -##interactive-timeout -##[mysqld_safe] -##malloc-lib=//opt/app/mysql/local/lib/libjemalloc.so.1 -##log-error=//opt/app/mysql/log/mysqld.log diff --git a/kubernetes/clamp/charts/mariadb/resources/config/mariadb/docker-entrypoint-initdb.d/create-tables.sql b/kubernetes/clamp/charts/mariadb/resources/config/mariadb/docker-entrypoint-initdb.d/create-tables.sql deleted file mode 100644 index 1f153bce04..0000000000 --- a/kubernetes/clamp/charts/mariadb/resources/config/mariadb/docker-entrypoint-initdb.d/create-tables.sql +++ /dev/null @@ -1,257 +0,0 @@ - - create table dictionary ( - name varchar(255) not null, - created_by varchar(255), - created_timestamp datetime(6) not null, - updated_by varchar(255), - updated_timestamp datetime(6) not null, - dictionary_second_level integer, - dictionary_type varchar(255), - primary key (name) - ) engine=InnoDB; - - create table dictionary_elements ( - short_name varchar(255) not null, - created_by varchar(255), - created_timestamp datetime(6) not null, - updated_by varchar(255), - updated_timestamp datetime(6) not null, - description varchar(255) not null, - name varchar(255) not null, - subdictionary_name varchar(255), - type varchar(255) not null, - primary key (short_name) - ) engine=InnoDB; - - create table dictionary_to_dictionaryelements ( - dictionary_name varchar(255) not null, - dictionary_element_short_name varchar(255) not null, - primary key (dictionary_name, dictionary_element_short_name) - ) engine=InnoDB; - - create table hibernate_sequence ( - next_val bigint - ) engine=InnoDB; - - insert into hibernate_sequence values ( 1 ); - - create table loop_element_models ( - name varchar(255) not null, - created_by varchar(255), - created_timestamp datetime(6) not null, - updated_by varchar(255), - updated_timestamp datetime(6) not null, - blueprint_yaml MEDIUMTEXT, - dcae_blueprint_id varchar(255), - loop_element_type varchar(255) not null, - short_name varchar(255), - primary key (name) - ) engine=InnoDB; - - create table loop_logs ( - id bigint not null, - log_component varchar(255) not null, - log_instant datetime(6) not null, - log_type varchar(255) not null, - message MEDIUMTEXT not null, - loop_id varchar(255) not null, - primary key (id) - ) engine=InnoDB; - - create table loop_templates ( - name varchar(255) not null, - created_by varchar(255), - created_timestamp datetime(6) not null, - updated_by varchar(255), - updated_timestamp datetime(6) not null, - allowed_loop_type varchar(255), - blueprint_yaml MEDIUMTEXT, - dcae_blueprint_id varchar(255), - maximum_instances_allowed integer, - svg_representation MEDIUMTEXT, - unique_blueprint boolean default false, - service_uuid varchar(255), - primary key (name) - ) engine=InnoDB; - - create table loopelementmodels_to_policymodels ( - loop_element_name varchar(255) not null, - policy_model_type varchar(255) not null, - policy_model_version varchar(255) not null, - primary key (loop_element_name, policy_model_type, policy_model_version) - ) engine=InnoDB; - - create table loops ( - name varchar(255) not null, - created_by varchar(255), - created_timestamp datetime(6) not null, - updated_by varchar(255), - updated_timestamp datetime(6) not null, - dcae_deployment_id varchar(255), - dcae_deployment_status_url varchar(255), - global_properties_json json, - last_computed_state varchar(255) not null, - svg_representation MEDIUMTEXT, - loop_template_name varchar(255) not null, - service_uuid varchar(255), - primary key (name) - ) engine=InnoDB; - - create table loops_to_microservicepolicies ( - loop_name varchar(255) not null, - microservicepolicy_name varchar(255) not null, - primary key (loop_name, microservicepolicy_name) - ) engine=InnoDB; - - create table looptemplates_to_loopelementmodels ( - loop_element_model_name varchar(255) not null, - loop_template_name varchar(255) not null, - flow_order integer not null, - primary key (loop_element_model_name, loop_template_name) - ) engine=InnoDB; - - create table micro_service_policies ( - name varchar(255) not null, - created_by varchar(255), - created_timestamp datetime(6) not null, - updated_by varchar(255), - updated_timestamp datetime(6) not null, - configurations_json json, - json_representation json not null, - pdp_group varchar(255), - pdp_sub_group varchar(255), - context varchar(255), - dcae_blueprint_id varchar(255), - dcae_deployment_id varchar(255), - dcae_deployment_status_url varchar(255), - device_type_scope varchar(255), - shared bit not null, - loop_element_model_id varchar(255), - policy_model_type varchar(255), - policy_model_version varchar(255), - primary key (name) - ) engine=InnoDB; - - create table operational_policies ( - name varchar(255) not null, - created_by varchar(255), - created_timestamp datetime(6) not null, - updated_by varchar(255), - updated_timestamp datetime(6) not null, - configurations_json json, - json_representation json not null, - pdp_group varchar(255), - pdp_sub_group varchar(255), - loop_element_model_id varchar(255), - policy_model_type varchar(255), - policy_model_version varchar(255), - loop_id varchar(255) not null, - primary key (name) - ) engine=InnoDB; - - create table policy_models ( - policy_model_type varchar(255) not null, - version varchar(255) not null, - created_by varchar(255), - created_timestamp datetime(6) not null, - updated_by varchar(255), - updated_timestamp datetime(6) not null, - policy_acronym varchar(255), - policy_tosca MEDIUMTEXT, - policy_pdp_group json, - primary key (policy_model_type, version) - ) engine=InnoDB; - - create table services ( - service_uuid varchar(255) not null, - name varchar(255) not null, - resource_details json, - service_details json, - version varchar(255), - primary key (service_uuid) - ) engine=InnoDB; - - alter table dictionary_to_dictionaryelements - add constraint FK68hjjinnm8nte2owstd0xwp23 - foreign key (dictionary_element_short_name) - references dictionary_elements (short_name); - - alter table dictionary_to_dictionaryelements - add constraint FKtqfxg46gsxwlm2gkl6ne3cxfe - foreign key (dictionary_name) - references dictionary (name); - - alter table loop_logs - add constraint FK1j0cda46aickcaoxqoo34khg2 - foreign key (loop_id) - references loops (name); - - alter table loop_templates - add constraint FKn692dk6281wvp1o95074uacn6 - foreign key (service_uuid) - references services (service_uuid); - - alter table loopelementmodels_to_policymodels - add constraint FK23j2q74v6kaexefy0tdabsnda - foreign key (policy_model_type, policy_model_version) - references policy_models (policy_model_type, version); - - alter table loopelementmodels_to_policymodels - add constraint FKjag1iu0olojfwryfkvb5o0rk5 - foreign key (loop_element_name) - references loop_element_models (name); - - alter table loops - add constraint FK844uwy82wt0l66jljkjqembpj - foreign key (loop_template_name) - references loop_templates (name); - - alter table loops - add constraint FK4b9wnqopxogwek014i1shqw7w - foreign key (service_uuid) - references services (service_uuid); - - alter table loops_to_microservicepolicies - add constraint FKle255jmi7b065fwbvmwbiehtb - foreign key (microservicepolicy_name) - references micro_service_policies (name); - - alter table loops_to_microservicepolicies - add constraint FK8avfqaf7xl71l7sn7a5eri68d - foreign key (loop_name) - references loops (name); - - alter table looptemplates_to_loopelementmodels - add constraint FK1k7nbrbugvqa0xfxkq3cj1yn9 - foreign key (loop_element_model_name) - references loop_element_models (name); - - alter table looptemplates_to_loopelementmodels - add constraint FKj29yxyw0x7ue6mwgi6d3qg748 - foreign key (loop_template_name) - references loop_templates (name); - - alter table micro_service_policies - add constraint FKqvvdypacbww07fuv8xvlvdjgl - foreign key (loop_element_model_id) - references loop_element_models (name); - - alter table micro_service_policies - add constraint FKn17j9ufmyhqicb6cvr1dbjvkt - foreign key (policy_model_type, policy_model_version) - references policy_models (policy_model_type, version); - - alter table operational_policies - add constraint FKi9kh7my40737xeuaye9xwbnko - foreign key (loop_element_model_id) - references loop_element_models (name); - - alter table operational_policies - add constraint FKlsyhfkoqvkwj78ofepxhoctip - foreign key (policy_model_type, policy_model_version) - references policy_models (policy_model_type, version); - - alter table operational_policies - add constraint FK1ddoggk9ni2bnqighv6ecmuwu - foreign key (loop_id) - references loops (name); diff --git a/kubernetes/clamp/charts/mariadb/templates/NOTES.txt b/kubernetes/clamp/charts/mariadb/templates/NOTES.txt deleted file mode 100644 index 1103affff1..0000000000 --- a/kubernetes/clamp/charts/mariadb/templates/NOTES.txt +++ /dev/null @@ -1,32 +0,0 @@ -# Copyright © 2018 AT&T, Amdocs, Bell Canada Intellectual Property. All rights reserved. -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. -1. Get the application URL by running these commands: -{{- if .Values.ingress.enabled }} -{{- range .Values.ingress.hosts }} - http://{{ . }} -{{- end }} -{{- else if contains "NodePort" .Values.service.type }} - export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.name" . }}) - export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}") - echo http://$NODE_IP:$NODE_PORT -{{- else if contains "LoadBalancer" .Values.service.type }} - NOTE: It may take a few minutes for the LoadBalancer IP to be available. - You can watch the status of by running 'kubectl get svc -w {{ include "common.name" . }}' - export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.name" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}') - echo http://$SERVICE_IP:{{ .Values.service.externalPort }} -{{- else if contains "ClusterIP" .Values.service.type }} - export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ template "common.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}") - echo "Visit http://127.0.0.1:8080 to use your application" - kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }} -{{- end }} diff --git a/kubernetes/clamp/charts/mariadb/templates/configmap.yaml b/kubernetes/clamp/charts/mariadb/templates/configmap.yaml deleted file mode 100644 index 01420aa97b..0000000000 --- a/kubernetes/clamp/charts/mariadb/templates/configmap.yaml +++ /dev/null @@ -1,55 +0,0 @@ -# Copyright © 2017 Amdocs, Bell Canada -# Modifications Copyright © 2018 AT&T -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -#{{ if not .Values.disableClampClampMariadb }} -apiVersion: v1 -kind: ConfigMap -metadata: - name: clamp-entrypoint-bulkload-configmap - namespace: {{ include "common.namespace" . }} - labels: - app: {{ include "common.name" . }} - chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} - release: {{ include "common.release" . }} - heritage: {{ .Release.Service }} -data: -{{ tpl (.Files.Glob "resources/config/mariadb/docker-entrypoint-initdb.d/*").AsConfig . | indent 2 }} ---- -apiVersion: v1 -kind: ConfigMap -metadata: - name: clamp-mariadb-conf-configmap - namespace: {{ include "common.namespace" . }} - labels: - app: {{ include "common.name" . }} - chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} - release: {{ include "common.release" . }} - heritage: {{ .Release.Service }} -data: -{{ tpl (.Files.Glob "resources/config/mariadb/conf.d/conf1/*").AsConfig . | indent 2 }} ---- -apiVersion: v1 -kind: ConfigMap -metadata: - name: {{ include "common.fullname" . }} - namespace: {{ include "common.namespace" . }} - labels: - app: {{ include "common.name" . }} - chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} - release: {{ include "common.release" . }} - heritage: {{ .Release.Service }} -data: -{{ tpl (.Files.Glob "resources/config/init/*").AsConfig . | indent 2 }} -#{{ end }} diff --git a/kubernetes/clamp/charts/mariadb/templates/deployment.yaml b/kubernetes/clamp/charts/mariadb/templates/deployment.yaml deleted file mode 100644 index 7d6e162813..0000000000 --- a/kubernetes/clamp/charts/mariadb/templates/deployment.yaml +++ /dev/null @@ -1,111 +0,0 @@ -# Copyright © 2017 Amdocs, Bell Canada -# Modifications Copyright © 2018 AT&T -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -apiVersion: apps/v1 -kind: Deployment -metadata: - name: {{ include "common.fullname" . }} - namespace: {{ include "common.namespace" . }} - labels: - app: {{ include "common.name" . }} - chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} - release: {{ include "common.release" . }} - heritage: {{ .Release.Service }} -spec: - replicas: {{ .Values.replicaCount }} - selector: - matchLabels: - app: {{ include "common.name" . }} - template: - metadata: - labels: - app: {{ include "common.name" . }} - release: {{ include "common.release" . }} - spec: - containers: - - name: {{ include "common.name" . }} - image: "{{ include "common.repository" . }}/{{ .Values.image }}" - imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }} - ports: - - containerPort: {{ .Values.service.internalPort }} - # disable liveness probe when breakpoints set in debugger - # so K8s doesn't restart unresponsive container - {{- if eq .Values.liveness.enabled true }} - livenessProbe: - tcpSocket: - port: {{ .Values.service.internalPort }} - initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }} - periodSeconds: {{ .Values.liveness.periodSeconds }} - {{ end -}} - readinessProbe: - tcpSocket: - port: {{ .Values.service.internalPort }} - initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }} - periodSeconds: {{ .Values.readiness.periodSeconds }} - env: - - name: MYSQL_USER - {{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "db-secret" "key" "login") | indent 12 }} - - name: MYSQL_PASSWORD - {{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "db-secret" "key" "password") | indent 12 }} - - name: MYSQL_ROOT_PASSWORD - {{- include "common.secret.envFromSecretFast" (dict "global" . "uid" "db-root-pass" "key" "password") | indent 12 }} - - name: MYSQL_DATABASE - value: {{ tpl .Values.db.databaseName .}} - volumeMounts: - - mountPath: /docker-entrypoint.sh - subPath: docker-entrypoint.sh - name: init-script - - mountPath: /etc/localtime - name: localtime - readOnly: true - - mountPath: /docker-entrypoint-initdb.d/ - name: docker-entrypoint-bulkload - - mountPath: /etc/mysql/conf.d/conf1/ - name: clamp-mariadb-conf - - mountPath: /var/lib/mysql - name: clamp-mariadb-data - resources: -{{ include "common.resources" . | indent 12 }} - {{- if .Values.nodeSelector }} - nodeSelector: -{{ toYaml .Values.nodeSelector | indent 10 }} - {{- end -}} - {{- if .Values.affinity }} - affinity: -{{ toYaml .Values.affinity | indent 10 }} - {{- end }} - volumes: - {{- if .Values.persistence.enabled }} - - name: clamp-mariadb-data - persistentVolumeClaim: - claimName: {{ include "common.fullname" . }} - {{- else }} - emptyDir: {} - {{- end }} - - name: docker-entrypoint-bulkload - configMap: - name: clamp-entrypoint-bulkload-configmap - - name: clamp-mariadb-conf - configMap: - name: clamp-mariadb-conf-configmap - - name: localtime - hostPath: - path: /etc/localtime - - name: init-script - configMap: - name: {{ include "common.fullname" . }} - defaultMode: 0755 - imagePullSecrets: - - name: "{{ include "common.namespace" . }}-docker-registry-key" diff --git a/kubernetes/clamp/charts/mariadb/templates/pv.yaml b/kubernetes/clamp/charts/mariadb/templates/pv.yaml deleted file mode 100644 index 424987936d..0000000000 --- a/kubernetes/clamp/charts/mariadb/templates/pv.yaml +++ /dev/null @@ -1,41 +0,0 @@ -{{/* -# Copyright © 2017 Amdocs, Bell Canada -# Modifications Copyright © 2018 AT&T -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. -*/}} - -{{- if and .Values.persistence.enabled (not .Values.persistence.existingClaim) -}} -{{- if eq "True" (include "common.needPV" .) -}} -kind: PersistentVolume -apiVersion: v1 -metadata: - name: {{ include "common.fullname" . }}-data - namespace: {{ include "common.namespace" . }} - labels: - app: {{ include "common.name" . }} - chart: "{{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}" - release: "{{ include "common.release" . }}" - heritage: "{{ .Release.Service }}" - name: {{ include "common.fullname" . }} -spec: - capacity: - storage: {{ .Values.persistence.size}} - accessModes: - - {{ .Values.persistence.accessMode }} - storageClassName: "{{ include "common.fullname" . }}-data" - persistentVolumeReclaimPolicy: {{ .Values.persistence.volumeReclaimPolicy }} - hostPath: - path: {{ .Values.global.persistence.mountPath | default .Values.persistence.mountPath }}/{{ include "common.release" . }}/{{ .Values.persistence.mountSubPath }} -{{- end -}} -{{- end -}} diff --git a/kubernetes/clamp/charts/mariadb/templates/pvc.yaml b/kubernetes/clamp/charts/mariadb/templates/pvc.yaml deleted file mode 100644 index 6856c80540..0000000000 --- a/kubernetes/clamp/charts/mariadb/templates/pvc.yaml +++ /dev/null @@ -1,40 +0,0 @@ -{{/* -# Copyright © 2017 Amdocs, Bell Canada -# Modifications Copyright © 2018 AT&T -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. -*/}} - -{{- if and .Values.persistence.enabled (not .Values.persistence.existingClaim) -}} -kind: PersistentVolumeClaim -apiVersion: v1 -metadata: - name: {{ include "common.fullname" . }} - namespace: {{ include "common.namespace" . }} - labels: - app: {{ include "common.name" . }} - chart: "{{ .Chart.Name }}-{{ .Chart.Version }}" - release: "{{ include "common.release" . }}" - heritage: "{{ .Release.Service }}" -{{- if .Values.persistence.annotations }} - annotations: -{{ toYaml .Values.persistence.annotations | indent 4 }} -{{- end }} -spec: - accessModes: - - {{ .Values.persistence.accessMode }} - resources: - requests: - storage: {{ .Values.persistence.size }} - storageClassName: {{ include "common.storageClass" . }} -{{- end -}} diff --git a/kubernetes/clamp/charts/mariadb/templates/secrets.yaml b/kubernetes/clamp/charts/mariadb/templates/secrets.yaml deleted file mode 100644 index 57f88ce32d..0000000000 --- a/kubernetes/clamp/charts/mariadb/templates/secrets.yaml +++ /dev/null @@ -1,16 +0,0 @@ -# Copyright © 2017 Amdocs, Bell Canada -# Modifications Copyright © 2018 AT&T -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -{{ include "common.secretFast" . }} diff --git a/kubernetes/clamp/charts/mariadb/templates/service.yaml b/kubernetes/clamp/charts/mariadb/templates/service.yaml deleted file mode 100644 index 2533c26161..0000000000 --- a/kubernetes/clamp/charts/mariadb/templates/service.yaml +++ /dev/null @@ -1,39 +0,0 @@ -# Copyright © 2017 Amdocs, Bell Canada -# Modifications Copyright © 2018 AT&T -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -apiVersion: v1 -kind: Service -metadata: - name: {{ include "common.servicename" . }} - namespace: {{ include "common.namespace" . }} - labels: - app: {{ include "common.name" . }} - chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }} - release: {{ include "common.release" . }} - heritage: {{ .Release.Service }} -spec: - type: {{ .Values.service.type }} - ports: - {{if eq .Values.service.type "NodePort" -}} - - port: {{ .Values.service.internalPort }} - nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }} - {{- else -}} - - port: {{ .Values.service.externalPort }} - targetPort: {{ .Values.service.internalPort }} - {{- end}} - name: {{ .Values.service.portName }} - selector: - app: {{ include "common.name" . }} - release: {{ include "common.release" . }} diff --git a/kubernetes/clamp/charts/mariadb/values.yaml b/kubernetes/clamp/charts/mariadb/values.yaml deleted file mode 100644 index 8cf489b377..0000000000 --- a/kubernetes/clamp/charts/mariadb/values.yaml +++ /dev/null @@ -1,125 +0,0 @@ -# Copyright © 2017 Amdocs, Bell Canada -# Modifications Copyright © 2018-2019 AT&T -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -################################################################# -# Global configuration defaults. -################################################################# -global: # global defaults - nodePortPrefix: 302 - - persistence: {} -# application image -repository: docker.io -image: mariadb:10.5.4 -pullPolicy: Always -flavor: small -################################################################# -# Secrets metaconfig -################################################################# -secrets: - - uid: db-root-pass - type: password - externalSecret: '{{ tpl (default "" .Values.db.rootCredsExternalSecret) . }}' - password: '{{ .Values.db.rootPass }}' - - uid: db-secret - type: basicAuth - externalSecret: '{{ tpl (default "" .Values.db.userCredsExternalSecret) . }}' - login: '{{ .Values.db.user }}' - password: '{{ .Values.db.password }}' - -# Application configuration -db: {} - -# default number of instances -replicaCount: 1 - -nodeSelector: {} - -affinity: {} - -# probe configuration parameters -liveness: - initialDelaySeconds: 10 - periodSeconds: 10 - # necessary to disable liveness probe when setting breakpoints - # in debugger so K8s doesn't restart unresponsive container - enabled: true - -readiness: - initialDelaySeconds: 10 - periodSeconds: 10 - -## Persist data to a persitent volume -persistence: - enabled: true - - ## A manually managed Persistent Volume and Claim - ## Requires persistence.enabled: true - ## If defined, PVC must be created manually before volume will be bound - # existingClaim: - volumeReclaimPolicy: Retain - - ## database data Persistent Volume Storage Class - ## If defined, storageClassName: <storageClass> - ## If set to "-", storageClassName: "", which disables dynamic provisioning - ## If undefined (the default) or set to null, no storageClassName spec is - ## set, choosing the default provisioner. (gp2 on AWS, standard on - ## GKE, AWS & OpenStack) - ## - # storageClass: "-" - accessMode: ReadWriteOnce - size: 2Gi - mountPath: /dockerdata-nfs - mountSubPath: clamp/mariadb/data - -service: - type: ClusterIP - name: clampdb - portName: clampdb - internalPort: 3306 - externalPort: 3306 - - -ingress: - enabled: false - - -#resources: {} - # We usually recommend not to specify default resources and to leave this as a conscious - # choice for the user. This also increases chances charts run on environments with little - # resources, such as Minikube. If you do want to specify resources, uncomment the following - # lines, adjust them as necessary, and remove the curly braces after 'resources:'. - # - # Example: - # Configure resource requests and limits - # ref: http://kubernetes.io/docs/user-guide/compute-resources/ - # Minimum memory for development is 2 CPU cores and 4GB memory - # Minimum memory for production is 4 CPU cores and 8GB memory -resources: - small: - limits: - cpu: 1 - memory: 500Mi - requests: - cpu: 10m - memory: 200Mi - large: - limits: - cpu: 1 - memory: 500Mi - requests: - cpu: 10m - memory: 200Mi - unlimited: {} |