diff options
| -rw-r--r-- | docs/oom_cloud_setup_guide.rst | 9 | ||||
| -rw-r--r-- | docs/oom_developer_guide.rst | 7 | ||||
| -rw-r--r-- | docs/oom_quickstart_guide.rst | 20 | ||||
| -rw-r--r-- | docs/oom_setup_kubernetes_rancher.rst | 3 | ||||
| -rw-r--r-- | docs/oom_user_guide.rst | 23 | ||||
| -rw-r--r-- | docs/requirements-docs.txt | 23 | ||||
| -rw-r--r-- | tox.ini | 3 |
7 files changed, 45 insertions, 43 deletions
diff --git a/docs/oom_cloud_setup_guide.rst b/docs/oom_cloud_setup_guide.rst index 033ba43fe4..adebcba487 100644 --- a/docs/oom_cloud_setup_guide.rst +++ b/docs/oom_cloud_setup_guide.rst @@ -80,10 +80,11 @@ components that are needed will drastically reduce the requirements. ===== ===== ====== ==================== .. note:: - Kubernetes supports a maximum of 110 pods per node - configurable in the --max-pods=n setting off the - "additional kubelet flags" box in the kubernetes template window described in 'ONAP Development - 110 pod limit Wiki' - - this limit does not need to be modified . The use of many small - nodes is preferred over a few larger nodes (for example 14x16GB - 8 vCores each). + Kubernetes supports a maximum of 110 pods per node - configurable in the + --max-pods=n setting off the "additional kubelet flags" box in the kubernetes + template window described in 'ONAP Development - 110 pod limit Wiki' + - this limit does not need to be modified . The use of many small nodes is + preferred over a few larger nodes (for example 14x16GB - 8 vCores each). Subsets of ONAP may still be deployed on a single node. Cloud Installation diff --git a/docs/oom_developer_guide.rst b/docs/oom_developer_guide.rst index 3d8cdb1128..552aea25a7 100644 --- a/docs/oom_developer_guide.rst +++ b/docs/oom_developer_guide.rst @@ -126,9 +126,10 @@ The top level of the ONAP charts is shown below: └── configs The common section of charts consists of a set of templates that assist with -parameter substitution (`_name.tpl`, `_namespace.tpl` and others) and a set of charts -for components used throughout ONAP. When the common components are used by other charts they -are instantiated each time or we can deploy a shared instances for several components. +parameter substitution (`_name.tpl`, `_namespace.tpl` and others) and a set of +charts for components used throughout ONAP. When the common components are used +by other charts they are instantiated each time or we can deploy a shared +instances for several components. All of the ONAP components have charts that follow the pattern shown below: diff --git a/docs/oom_quickstart_guide.rst b/docs/oom_quickstart_guide.rst index d573c94bb0..67b5794b83 100644 --- a/docs/oom_quickstart_guide.rst +++ b/docs/oom_quickstart_guide.rst @@ -50,8 +50,8 @@ an override file like `onap-all.yaml`, `onap-vfw.yaml` or `openstack.yaml` file to suit your deployment with items like the OpenStack tenant information. .. note:: - Standard and example override files (e.g. `onap-all.yaml`, `openstack.yaml`) can be found in - the `oom/kubernetes/onap/resources/overrides/` directory. + Standard and example override files (e.g. `onap-all.yaml`, `openstack.yaml`) + can be found in the `oom/kubernetes/onap/resources/overrides/` directory. a. You may want to selectively enable or disable ONAP components by changing @@ -62,14 +62,15 @@ to suit your deployment with items like the OpenStack tenant information. the Robot Helm charts or Robot section of `openstack.yaml` - c. Encrypt the OpenStack password using the java based script for SO Helm charts - or SO section of `openstack.yaml`. + c. Encrypt the OpenStack password using the java based script for SO Helm + charts or SO section of `openstack.yaml`. d. Update the OpenStack parameters that will be used by Robot, SO and APPC Helm charts or use an override file to replace them. - e. Add in the command line a value for the global master password (global.masterPassword). + e. Add in the command line a value for the global master password + (global.masterPassword). @@ -245,9 +246,11 @@ for use:: > kubectl get pods -n onap -o=wide .. note:: - While all pods may be in a Running state, it is not a guarantee that all components are running fine. + While all pods may be in a Running state, it is not a guarantee that all + components are running fine. - Launch the healthcheck tests using Robot to verify that the components are healthy:: + Launch the healthcheck tests using Robot to verify that the components are + healthy:: > ~/oom/kubernetes/robot/ete-k8s.sh onap health @@ -256,4 +259,5 @@ for use:: > helm undeploy dev -More examples of using the deploy and undeploy plugins can be found here: https://wiki.onap.org/display/DW/OOM+Helm+%28un%29Deploy+plugins +More examples of using the deploy and undeploy plugins can be found here: +https://wiki.onap.org/display/DW/OOM+Helm+%28un%29Deploy+plugins diff --git a/docs/oom_setup_kubernetes_rancher.rst b/docs/oom_setup_kubernetes_rancher.rst index eea46c0e51..e002d38897 100644 --- a/docs/oom_setup_kubernetes_rancher.rst +++ b/docs/oom_setup_kubernetes_rancher.rst @@ -276,7 +276,8 @@ Download and install RKE on a VM, desktop or laptop. Binaries can be found here for Linux and Mac: https://github.com/rancher/rke/releases/tag/v1.0.6 .. note:: - There are several ways to install RKE. Further parts of this documentation assumes that you have rke command available. + There are several ways to install RKE. Further parts of this documentation + assumes that you have rke command available. If you don't know how to install RKE you may follow the below steps: * chmod +x ./rke_linux-amd64 diff --git a/docs/oom_user_guide.rst b/docs/oom_user_guide.rst index 3a707e25ea..5f63c7d1a2 100644 --- a/docs/oom_user_guide.rst +++ b/docs/oom_user_guide.rst @@ -444,23 +444,24 @@ the portal and then simply access now the new ssl-encrypted URL: | Alternatives Considered: - - Kubernetes port forwarding was considered but discarded as it would require - the end user to run a script that opens up port forwarding tunnels to each of - the pods that provides a portal application widget. + - Kubernetes port forwarding was considered but discarded as it would + require the end user to run a script that opens up port forwarding tunnels + to each of the pods that provides a portal application widget. - Reverting to a VNC server similar to what was deployed in the Amsterdam - release was also considered but there were many issues with resolution, lack - of volume mount, /etc/hosts dynamic update, file upload that were a tall order - to solve in time for the Beijing release. + release was also considered but there were many issues with resolution, + lack of volume mount, /etc/hosts dynamic update, file upload that were + a tall order to solve in time for the Beijing release. Observations: - - If you are not using floating IPs in your Kubernetes deployment and directly attaching - a public IP address (i.e. by using your public provider network) to your K8S Node - VMs' network interface, then the output of 'kubectl -n onap get services | grep "portal-app"' + - If you are not using floating IPs in your Kubernetes deployment and + directly attaching a public IP address (i.e. by using your public provider + network) to your K8S Node VMs' network interface, then the output of + 'kubectl -n onap get services | grep "portal-app"' will show your public IP instead of the private network's IP. Therefore, - you can grab this public IP directly (as compared to trying to find the floating - IP first) and map this IP in /etc/hosts. + you can grab this public IP directly (as compared to trying to find the + floating IP first) and map this IP in /etc/hosts. .. figure:: oomLogoV2-Monitor.png :align: right diff --git a/docs/requirements-docs.txt b/docs/requirements-docs.txt index 1c1895acf6..edffc4b5d7 100644 --- a/docs/requirements-docs.txt +++ b/docs/requirements-docs.txt @@ -1,16 +1,9 @@ -tox -Sphinx -doc8 -docutils -setuptools -six -sphinx_rtd_theme>=0.4.3 -sphinxcontrib-blockdiag +lfdocs-conf~=0.7.5 +funcparserlib~=1.0.0a0 +sphinxcontrib.blockdiag~=2.0.0 sphinxcontrib-needs<0.6.0 -sphinxcontrib-nwdiag -sphinxcontrib-redoc -sphinxcontrib-seqdiag -sphinxcontrib-swaggerdoc -sphinxcontrib-plantuml -sphinx_bootstrap_theme -lfdocs-conf +sphinxcontrib.plantuml~=0.21 +sphinxcontrib.nwdiag~=2.0.0 +sphinxcontrib-seqdiag~=2.0.0 +sphinxcontrib-swaggerdoc~=0.1.7 +sphinx-rtd-theme~=1.0.0 @@ -12,8 +12,9 @@ ignore-path-errors=docs/helm-search.txt;D001 [testenv:doc8] deps = -rdocs/requirements-docs.txt + doc8 commands = - doc8 docs/ + - doc8 docs/ [testenv:docs] deps = -rdocs/requirements-docs.txt |