Add frontend container

Add the frontend container as the main chart, and add clamp-backend as
the a sub chart

Issue-ID: CLAMP-486
Change-Id: Ib02562d608011047157b77b302902de86c0d954d
Signed-off-by: sebdet <sebastien.determe@intl.att.com>

10 files changed, 797 insertions, 0 deletions

diff --git a/kubernetes/clamp/charts/clamp-backend/Chart.yaml b/kubernetes/clamp/charts/clamp-backend/Chart.yaml
new file mode 100644
index 0000000000..a6aec46264
--- /dev/null
+++ b/kubernetes/clamp/charts/clamp-backend/Chart.yaml
@@ -0,0 +1,19 @@
+# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+description: ONAP Clamp
+name: clamp-backend
+version: 5.0.0
diff --git a/kubernetes/clamp/charts/clamp-backend/requirements.yaml b/kubernetes/clamp/charts/clamp-backend/requirements.yaml
new file mode 100644
index 0000000000..05d49a8d7b
--- /dev/null
+++ b/kubernetes/clamp/charts/clamp-backend/requirements.yaml
@@ -0,0 +1,22 @@
+# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+dependencies:
+  - name: common
+    version: ~5.x-0
+    # local reference to common chart, as it is
+    # a part of this chart's package and will not
+    # be published independently to a repo (at this point)
+    repository: '@local'
diff --git a/kubernetes/clamp/charts/clamp-backend/resources/config/log/filebeat/filebeat.yml b/kubernetes/clamp/charts/clamp-backend/resources/config/log/filebeat/filebeat.yml
new file mode 100644
index 0000000000..dab2e44f5e
--- /dev/null
+++ b/kubernetes/clamp/charts/clamp-backend/resources/config/log/filebeat/filebeat.yml
@@ -0,0 +1,53 @@
+# Copyright © 2018  AT&T, Amdocs, Bell Canada Intellectual Property.  All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+filebeat.prospectors:
+#it is mandatory, in our case it's log
+- input_type: log
+  #This is the canolical path as mentioned in logback.xml, *.* means it will monitor all files in the directory.
+  paths:
+    - /var/log/onap/*/*/*/*.log
+    - /var/log/onap/*/*/*.log
+    - /var/log/onap/*/*.log
+  #Files older than this should be ignored.In our case it will be 48 hours i.e. 2 days. It is a helping flag for clean_inactive
+  ignore_older: 48h
+  # Remove the registry entry for a file that is more than the specified time. In our case it will be 96 hours, i.e. 4 days. It will help to keep registry records with in limit
+  clean_inactive: 96h
+
+# Name of the registry file. If a relative path is used, it is considered relative to the
+# data path. Else full qualified file name.
+#filebeat.registry_file: ${path.data}/registry
+
+
+output.logstash:
+  #List of logstash server ip addresses with port number.
+  #But, in our case, this will be the loadbalancer IP address.
+  #For the below property to work the loadbalancer or logstash should expose 5044 port to listen the filebeat events or port in the property should be changed appropriately.
+  hosts: ["{{.Values.config.log.logstashServiceName}}:{{.Values.config.log.logstashPort}}"]
+  #If enable will do load balancing among availabe Logstash, automatically.
+  loadbalance: true
+
+  #The list of root certificates for server verifications.
+  #If certificate_authorities is empty or not set, the trusted
+  #certificate authorities of the host system are used.
+  #ssl.certificate_authorities: $ssl.certificate_authorities
+
+  #The path to the certificate for SSL client authentication. If the certificate is not specified,
+  #client authentication is not available.
+  #ssl.certificate: $ssl.certificate
+
+  #The client certificate key used for client authentication.
+  #ssl.key: $ssl.key
+
+  #The passphrase used to decrypt an encrypted key stored in the configured key file
+  #ssl.key_passphrase: $ssl.key_passphrase
diff --git a/kubernetes/clamp/charts/clamp-backend/resources/config/logback.xml b/kubernetes/clamp/charts/clamp-backend/resources/config/logback.xml
new file mode 100644
index 0000000000..551ed34ee4
--- /dev/null
+++ b/kubernetes/clamp/charts/clamp-backend/resources/config/logback.xml
@@ -0,0 +1,316 @@
+<?xml version = "1.0" encoding = "UTF-8" ?>
+<!--
+# Copyright © 2018  AT&T, Amdocs, Bell Canada Intellectual Property.  All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+-->
+<included>
+	<jmxConfigurator />
+	<!-- Example evaluator filter applied against console appender -->
+	<property
+		name="p_tim"
+		value="%d{&quot;yyyy-MM-dd'T'HH:mm:ss.SSSXXX&quot;, UTC}" />
+	<property
+		name="p_lvl"
+		value="%level" />
+	<property
+		name="p_log"
+		value="%logger" />
+	<property
+		name="p_mdc"
+		value="%replace(%replace(%mdc){'\t','\\\\t'}){'\n', '\\\\n'}" />
+	<property
+		name="p_msg"
+		value="%replace(%replace(%msg){'\t', '\\\\t'}){'\n','\\\\n'}" />
+	<property
+		name="p_exc"
+		value="%replace(%replace(%rootException){'\t', '\\\\t'}){'\n','\\\\n'}" />
+	<property
+		name="p_mak"
+		value="%replace(%replace(%marker){'\t', '\\\\t'}){'\n','\\\\n'}" />
+	<property
+		name="p_thr"
+		value="%thread" />
+	<property
+		name="defaultPattern"
+		value="%nopexception${p_tim}\t${p_thr}\t${p_lvl}\t${p_log}\t${p_mdc}\t${p_msg}\t${p_exc}\t${p_mak}\t%n" />
+	<property
+		name="debugPattern"
+		value="%nopexception${p_tim}|${p_lvl}|${p_mdc}|${p_exc}|%msg%n" />
+
+	<!-- Example evaluator filter applied against console appender -->
+	<appender
+		name="STDOUT"
+		class="ch.qos.logback.core.ConsoleAppender">
+		<filter class="ch.qos.logback.classic.filter.ThresholdFilter">
+			<level>INFO</level>
+		</filter>
+		<encoder>
+			<pattern>%d{HH:mm:ss.SSS} [%thread] %-5level %logger{1024} - %msg%n
+			</pattern>
+		</encoder>
+	</appender>
+
+	<appender
+		name="ERROR"
+		class="ch.qos.logback.core.rolling.RollingFileAppender">
+		<filter class="ch.qos.logback.classic.filter.ThresholdFilter">
+			<level>INFO</level>
+		</filter>
+		<file>${logDirectory}/error.log</file>
+		<append>true</append>
+		<encoder>
+			<pattern>${defaultPattern}</pattern>
+		</encoder>
+		<rollingPolicy
+			class="ch.qos.logback.core.rolling.SizeAndTimeBasedRollingPolicy">
+			<fileNamePattern>${outputDirectory}/clamp/error.%d{yyyy-MM-dd}.%i.log.zip
+			</fileNamePattern>
+			<maxFileSize>50MB</maxFileSize>
+			<maxHistory>30</maxHistory>
+			<totalSizeCap>10GB</totalSizeCap>
+		</rollingPolicy>
+		<triggeringPolicy
+			class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
+			<maxFileSize>10MB</maxFileSize>
+		</triggeringPolicy>
+	</appender>
+
+	<appender
+		name="DEBUG"
+		class="ch.qos.logback.core.rolling.RollingFileAppender">
+		<file>${logDirectory}/debug.log</file>
+		<append>true</append>
+		<encoder>
+			<pattern>%d{HH:mm:ss.SSS} [%thread] %-5level %logger{1024} - %msg%n
+			</pattern>
+		</encoder>
+		<rollingPolicy
+			class="ch.qos.logback.core.rolling.SizeAndTimeBasedRollingPolicy">
+			<fileNamePattern>${outputDirectory}/clamp/debug.%d{yyyy-MM-dd}.%i.log.zip
+			</fileNamePattern>
+			<maxFileSize>50MB</maxFileSize>
+			<maxHistory>30</maxHistory>
+			<totalSizeCap>10GB</totalSizeCap>
+		</rollingPolicy>
+	</appender>
+
+
+	<appender
+		name="AUDIT"
+		class="ch.qos.logback.core.rolling.RollingFileAppender">
+		<file>${logDirectory}/audit.log</file>
+		<append>true</append>
+		<encoder>
+			<pattern>%X{BeginTimestamp}|%X{EndTimestamp}|%X{RequestId}|%X{ServiceInstanceId}|%.20thread|%X{VirtualServerName}|%X{ServiceName}|%X{PartnerName}|%X{StatusCode}|%X{ResponseCode}|%X{ResponseDescription}|%X{InstanceUUID}|%.-5level|%X{AlertSeverity}|%X{ServerIPAddress}|%X{ElapsedTime}|%X{ServerFQDN}|%X{RemoteHost}|%X{ClassName}|%X{Unused}|%X{ProcessKey}|%X{CustomField1}|%X{CustomField2}|%X{CustomField3}|%X{CustomField4}|%msg%n
+			</pattern>
+		</encoder>
+		<rollingPolicy
+			class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
+			<maxIndex>10</maxIndex>
+			<FileNamePattern>${logDirectory}/audit.%i.log.zip
+			</FileNamePattern>
+		</rollingPolicy>
+		<triggeringPolicy
+			class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
+			<maxFileSize>10MB</maxFileSize>
+		</triggeringPolicy>
+	</appender>
+	<appender
+		name="asyncEELFAudit"
+		class="ch.qos.logback.classic.AsyncAppender">
+		<queueSize>256</queueSize>
+		<appender-ref ref="AUDIT" />
+	</appender>
+
+	<appender
+		name="METRIC"
+		class="ch.qos.logback.core.rolling.RollingFileAppender">
+		<file>${logDirectory}/metric.log</file>
+		<append>true</append>
+		<encoder>
+			<pattern>%X{BeginTimestamp}|%X{EndTimestamp}|%X{RequestId}|%X{ServiceInstanceId}|%.20thread|%X{VirtualServerName}|%X{ServiceName}|%X{PartnerName}|%X{TargetEntity}|%X{TargetServiceName}|%X{StatusCode}|%X{ResponseCode}|%X{ResponseDescription}|%X{InstanceUUID}|%.-5level|%X{AlertSeverity}|%X{ServerIPAddress}|%X{ElapsedTime}|%X{ServerFQDN}|%X{RemoteHost}|%X{ClassName}|%X{Unused}|%X{ProcessKey}|%X{TargetVirtualEntity}|%X{CustomField1}|%X{CustomField2}|%X{CustomField3}|%X{CustomField4}|
+				%msg%n</pattern>
+		</encoder>
+		<rollingPolicy
+			class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
+			<maxIndex>10</maxIndex>
+			<FileNamePattern>${logDirectory}/metric.%i.log.zip
+			</FileNamePattern>
+		</rollingPolicy>
+		<triggeringPolicy
+			class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
+			<maxFileSize>10MB</maxFileSize>
+		</triggeringPolicy>
+	</appender>
+	<appender
+		name="asyncEELFMetrics"
+		class="ch.qos.logback.classic.AsyncAppender">
+		<queueSize>256</queueSize>
+		<appender-ref ref="METRIC" />
+	</appender>
+
+	<!-- SECURITY related loggers -->
+	<appender
+		name="SECURITY"
+		class="ch.qos.logback.core.rolling.RollingFileAppender">
+		<file>${logDirectory}/security.log</file>
+		<append>true</append>
+		<encoder>
+			<pattern>%X{BeginTimestamp}|%X{EndTimestamp}|%X{RequestId}|%X{ServiceInstanceId}|%.20thread|%X{VirtualServerName}|%X{ServiceName}|%X{PartnerName}|%X{StatusCode}|%X{ResponseCode}|%X{ResponseDescription}|%X{InstanceUUID}|%.-5level|%X{AlertSeverity}|%X{ServerIPAddress}|%X{ElapsedTime}|%X{ServerFQDN}|%X{RemoteHost}|%X{ClassName}|%X{Unused}|%X{ProcessKey}|%X{CustomField1}|%X{CustomField2}|%X{CustomField3}|%X{CustomField4}|%msg%n
+			</pattern>
+		</encoder>
+		<rollingPolicy
+			class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
+			<maxIndex>10</maxIndex>
+			<FileNamePattern>${logDirectory}/security.%i.log.zip
+			</FileNamePattern>
+		</rollingPolicy>
+		<triggeringPolicy
+			class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
+			<maxFileSize>10MB</maxFileSize>
+		</triggeringPolicy>
+	</appender>
+	<appender
+		name="asyncEELFSecurity"
+		class="ch.qos.logback.classic.AsyncAppender">
+		<queueSize>256</queueSize>
+		<appender-ref ref="SECURITY" />
+	</appender>
+	<!-- logback jms appenders & loggers definition starts here -->
+	<appender
+		name="auditLogs"
+		class="ch.qos.logback.core.rolling.RollingFileAppender">
+		<filter class="ch.qos.logback.classic.filter.ThresholdFilter">
+		</filter>
+		<file>${logDirectory}/Audit-${lrmRVer}-${lrmRO}-${Pid}.log</file>
+		<rollingPolicy
+			class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
+			<fileNamePattern>${logDirectory}/Audit-${lrmRVer}-${lrmRO}-${Pid}.%i.log.zip
+			</fileNamePattern>
+			<minIndex>1</minIndex>
+			<maxIndex>9</maxIndex>
+		</rollingPolicy>
+		<triggeringPolicy
+			class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
+			<maxFileSize>5MB</maxFileSize>
+		</triggeringPolicy>
+		<encoder>
+			<pattern>"%d [%thread] %-5level %logger{1024} - %msg%n"</pattern>
+		</encoder>
+	</appender>
+	<appender
+		name="perfLogs"
+		class="ch.qos.logback.core.rolling.RollingFileAppender">
+		<filter class="ch.qos.logback.classic.filter.ThresholdFilter">
+		</filter>
+		<file>${logDirectory}/Perform-${lrmRVer}-${lrmRO}-${Pid}.log</file>
+		<rollingPolicy
+			class="ch.qos.logback.core.rolling.FixedWindowRollingPolicy">
+			<fileNamePattern>${logDirectory}/Perform-${lrmRVer}-${lrmRO}-${Pid}.%i.log.zip
+			</fileNamePattern>
+			<minIndex>1</minIndex>
+			<maxIndex>9</maxIndex>
+		</rollingPolicy>
+		<triggeringPolicy
+			class="ch.qos.logback.core.rolling.SizeBasedTriggeringPolicy">
+			<maxFileSize>5MB</maxFileSize>
+		</triggeringPolicy>
+		<encoder>
+			<pattern>"%d [%thread] %-5level %logger{1024} - %msg%n"</pattern>
+		</encoder>
+	</appender>
+
+	<logger
+		name="org.onap.aaf"
+		level="DEBUG">
+		<appender-ref ref="DEBUG" />
+	</logger>
+	<logger
+		name="org.apache"
+		level="DEBUG">
+		<appender-ref ref="DEBUG" />
+	</logger>
+	<!-- Spring related loggers -->
+	<logger
+		name="org.springframework"
+		level="DEBUG">
+		<appender-ref ref="DEBUG" />
+	</logger>
+
+	<!-- CLDS related loggers -->
+	<logger
+		name="org.onap.clamp"
+		level="DEBUG">
+		<appender-ref ref="ERROR" />
+		<appender-ref ref="DEBUG" />
+	</logger>
+
+	<!-- CLDS related loggers -->
+	<logger
+		name="com.att.eelf.error"
+		level="OFF">
+		<appender-ref ref="ERROR" />
+	</logger>
+	<!-- EELF related loggers -->
+	<logger
+		name="com.att.eelf.audit"
+		level="INFO"
+		additivity="false">
+		<appender-ref ref="asyncEELFAudit" />
+	</logger>
+	<logger
+		name="com.att.eelf.metrics"
+		level="DEBUG"
+		additivity="false">
+		<appender-ref ref="asyncEELFMetrics" />
+	</logger>
+	<logger
+		name="com.att.eelf.security"
+		level="DEBUG"
+		additivity="false">
+		<appender-ref ref="asyncEELFSecurity" />
+	</logger>
+
+	<!-- logback internals logging -->
+	<logger
+		name="ch.qos.logback.classic"
+		level="INFO" />
+	<logger
+		name="ch.qos.logback.core"
+		level="INFO" />
+	<logger
+		name="AuditRecord"
+		level="INFO"
+		additivity="false">
+		<appender-ref ref="auditLogs" />
+	</logger>
+	<logger
+		name="AuditRecord_DirectCall"
+		level="INFO"
+		additivity="false">
+		<appender-ref ref="auditLogs" />
+	</logger>
+	<logger
+		name="PerfTrackerRecord"
+		level="INFO"
+		additivity="false">
+		<appender-ref ref="perfLogs" />
+	</logger>
+	<!-- logback jms appenders & loggers definition ends here -->
+
+	<root level="DEBUG">
+		<appender-ref ref="DEBUG" />
+		<appender-ref ref="STDOUT" />
+	</root>
+</included>
diff --git a/kubernetes/clamp/charts/clamp-backend/resources/config/sdc-controllers-config.json b/kubernetes/clamp/charts/clamp-backend/resources/config/sdc-controllers-config.json
new file mode 100644
index 0000000000..3adda95c11
--- /dev/null
+++ b/kubernetes/clamp/charts/clamp-backend/resources/config/sdc-controllers-config.json
@@ -0,0 +1,18 @@
+{
+  "sdc-connections":{
+    "sdc-controller":{
+        "user": "clamp",
+        "consumerGroup": "clamp",
+        "consumerId": "clamp",
+        "environmentName": "AUTO",
+        "sdcAddress": "sdc-be.{{ include "common.namespace" . }}:8443",
+        "password": "b7acccda32b98c5bb7acccda32b98c5b05D511BD6D93626E90D18E9D24D9B78CD34C7EE8012F0A189A28763E82271E50A5D4EC10C7D93E06E0A2D27CAE66B981",
+        "pollingInterval":30,
+        "pollingTimeout":30,
+        "activateServerTLSAuth":"false",
+        "keyStorePassword":"",
+        "keyStorePath":"",
+        "messageBusAddresses":["message-router.{{ include "common.namespace" . }}"]
+    }
+  }
+}
diff --git a/kubernetes/clamp/charts/clamp-backend/templates/NOTES.txt b/kubernetes/clamp/charts/clamp-backend/templates/NOTES.txt
new file mode 100644
index 0000000000..e36d6a5bfb
--- /dev/null
+++ b/kubernetes/clamp/charts/clamp-backend/templates/NOTES.txt
@@ -0,0 +1,32 @@
+# Copyright © 2018  AT&T, Amdocs, Bell Canada Intellectual Property.  All rights reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+1. Get the application URL by running these commands:
+{{- if .Values.ingress.enabled }}
+{{- range .Values.ingress.hosts }}
+  http://{{ . }}
+{{- end }}
+{{- else if contains "NodePort" .Values.service.type }}
+  export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.name" . }})
+  export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}")
+  echo http://$NODE_IP:$NODE_PORT
+{{- else if contains "LoadBalancer" .Values.service.type }}
+     NOTE: It may take a few minutes for the LoadBalancer IP to be available.
+           You can watch the status of by running 'kubectl get svc -w {{ include "common.name" . }}'
+  export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.name" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
+  echo http://$SERVICE_IP:{{ .Values.service.externalPort }}
+{{- else if contains "ClusterIP" .Values.service.type }}
+  export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ template "common.name" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
+  echo "Visit https://127.0.0.1:8443 to use your application"
+  kubectl port-forward $POD_NAME 8443:{{ .Values.service.internalPort }}
+{{- end }}
diff --git a/kubernetes/clamp/charts/clamp-backend/templates/configmap.yaml b/kubernetes/clamp/charts/clamp-backend/templates/configmap.yaml
new file mode 100644
index 0000000000..21df037a8a
--- /dev/null
+++ b/kubernetes/clamp/charts/clamp-backend/templates/configmap.yaml
@@ -0,0 +1,41 @@
+# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: ConfigMap
+metadata:
+  name: {{ include "common.fullname" . }}
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ .Release.Name }}
+    heritage: {{ .Release.Service }}
+data:
+{{ tpl (.Files.Glob "resources/config/*").AsConfig . | indent 2 }}
+  spring_application_json: {{ tpl .Values.config.springApplicationJson . | quote }}
+---
+apiVersion: v1
+kind: ConfigMap
+metadata:
+  name: {{ .Release.Name }}-clamp-filebeat-configmap
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ .Release.Name }}
+    heritage: {{ .Release.Service }}
+data:
+{{ tpl (.Files.Glob "resources/config/log/filebeat/*").AsConfig . | indent 2 }}
diff --git a/kubernetes/clamp/charts/clamp-backend/templates/deployment.yaml b/kubernetes/clamp/charts/clamp-backend/templates/deployment.yaml
new file mode 100644
index 0000000000..6b6fcc7e56
--- /dev/null
+++ b/kubernetes/clamp/charts/clamp-backend/templates/deployment.yaml
@@ -0,0 +1,126 @@
+# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: extensions/v1beta1
+kind: Deployment
+metadata:
+  name: {{ include "common.fullname" . }}
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ .Release.Name }}
+    heritage: {{ .Release.Service }}
+spec:
+  replicas: {{ .Values.replicaCount }}
+  template:
+    metadata:
+      labels:
+        app: {{ include "common.name" . }}
+        release: {{ .Release.Name }}
+    spec:
+      initContainers:
+      - command:
+        - /root/ready.py
+        args:
+        - --container-name
+        - mariadb
+        env:
+        - name: NAMESPACE
+          valueFrom:
+            fieldRef:
+              apiVersion: v1
+              fieldPath: metadata.namespace
+        image: "{{ .Values.global.readinessRepository }}/{{ .Values.global.readinessImage }}"
+        imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+        name: {{ include "common.name" . }}-readiness
+      containers:
+        # side car containers
+        - name: {{ include "common.name" . }}-filebeat-onap
+          image: "{{ .Values.global.loggingRepository }}/{{ .Values.global.loggingImage }}"
+          imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+          volumeMounts:
+          - name: {{ include "common.fullname" . }}-filebeat-conf
+            mountPath: /usr/share/filebeat/filebeat.yml
+            subPath: filebeat.yml
+          - name: {{ include "common.fullname" . }}-data-filebeat
+            mountPath: /usr/share/filebeat/data
+          - name: {{ include "common.fullname" . }}-logs
+            mountPath: /var/log/onap
+        - name: {{ include "common.name" . }}
+          image: "{{ include "common.repository" . }}/{{ .Values.image }}"
+          imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
+          args:
+            - "-Dcom.att.eelf.logging.file=file:/opt/clamp/logback.xml"
+            - ""
+          ports:
+          - containerPort: {{ .Values.service.internalPort }}
+          # disable liveness probe when breakpoints set in debugger
+          # so K8s doesn't restart unresponsive container
+          {{- if eq .Values.liveness.enabled true }}
+          livenessProbe:
+            tcpSocket:
+              port: {{ .Values.service.internalPort }}
+            initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
+            periodSeconds: {{ .Values.liveness.periodSeconds }}
+          {{ end -}}
+          readinessProbe:
+            tcpSocket:
+              port: {{ .Values.service.internalPort }}
+            initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
+            periodSeconds: {{ .Values.readiness.periodSeconds }}
+          volumeMounts:
+          - name: {{ include "common.fullname" . }}-logs
+            mountPath: /var/log/onap
+          - mountPath: /opt/clamp/sdc-controllers-config.json
+            name: {{ include "common.fullname" . }}-config
+            subPath: sdc-controllers-config.json
+          - mountPath: /opt/clamp/logback.xml
+            name: {{ include "common.fullname" . }}-config
+            subPath: logback.xml
+          env:
+            - name: SPRING_APPLICATION_JSON
+              valueFrom:
+                configMapKeyRef:
+                  name: {{ template "common.fullname" . }}
+                  key: spring_application_json
+          resources:
+{{ include "common.resources" . | indent 12 }}
+        {{- if .Values.nodeSelector }}
+        nodeSelector:
+{{ toYaml .Values.nodeSelector | indent 10 }}
+        {{- end -}}
+        {{- if .Values.affinity }}
+        affinity:
+{{ toYaml .Values.affinity | indent 10 }}
+        {{- end }}
+      volumes:
+        - name: {{ include "common.fullname" . }}-config
+          configMap:
+            name: {{ include "common.fullname" . }}
+            items:
+            - key: sdc-controllers-config.json
+              path: sdc-controllers-config.json
+            - key: logback.xml
+              path: logback.xml
+        - name: {{ include "common.fullname" . }}-filebeat-conf
+          configMap:
+            name: {{ .Release.Name }}-clamp-filebeat-configmap
+        - name: {{ include "common.fullname" . }}-data-filebeat
+          emptyDir: {}
+        - name:  {{ include "common.fullname" . }}-logs
+          emptyDir: {}
+      imagePullSecrets:
+      - name: "{{ include "common.namespace" . }}-docker-registry-key"
diff --git a/kubernetes/clamp/charts/clamp-backend/templates/service.yaml b/kubernetes/clamp/charts/clamp-backend/templates/service.yaml
new file mode 100644
index 0000000000..f1438a46c9
--- /dev/null
+++ b/kubernetes/clamp/charts/clamp-backend/templates/service.yaml
@@ -0,0 +1,40 @@
+# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+apiVersion: v1
+kind: Service
+metadata:
+  name: {{ include "common.servicename" . }}
+  namespace: {{ include "common.namespace" . }}
+  labels:
+    app: {{ include "common.name" . }}
+    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
+    release: {{ .Release.Name }}
+    heritage: {{ .Release.Service }}
+spec:
+  type: {{ .Values.service.type }}
+  ports:
+    {{if eq .Values.service.type "NodePort" -}}
+    - port: {{ .Values.service.internalPort }}
+      nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
+      name: {{ .Values.service.portName }}
+    {{- else -}}
+    - port: {{ .Values.service.externalPort }}
+      targetPort: {{ .Values.service.internalPort }}
+      name: {{ .Values.service.portName }}
+    {{- end}}
+  selector:
+    app: {{ include "common.name" . }}
+    release: {{ .Release.Name }}
diff --git a/kubernetes/clamp/charts/clamp-backend/values.yaml b/kubernetes/clamp/charts/clamp-backend/values.yaml
new file mode 100644
index 0000000000..27d284c582
--- /dev/null
+++ b/kubernetes/clamp/charts/clamp-backend/values.yaml
@@ -0,0 +1,130 @@
+# Copyright © 2017 Amdocs, Bell Canada
+# Modifications Copyright © 2018-2019 AT&T
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+#################################################################
+# Global configuration defaults.
+#################################################################
+global: # global defaults
+  nodePortPrefix: 302
+  repositorySecret: eyJuZXh1czMub25hcC5vcmc6MTAwMDEiOnsidXNlcm5hbWUiOiJkb2NrZXIiLCJwYXNzd29yZCI6ImRvY2tlciIsImVtYWlsIjoiQCIsImF1dGgiOiJaRzlqYTJWeU9tUnZZMnRsY2c9PSJ9fQ==
+  readinessRepository: oomk8s
+  readinessImage: readiness-check:2.0.0
+  persistence: {}
+
+flavor: small
+
+# application image
+repository: nexus3.onap.org:10001
+image: onap/clamp-backend:4.1.1
+pullPolicy: Always
+
+# flag to enable debugging - application support required
+debugEnabled: false
+
+#################################################################
+# Application configuration defaults.
+#################################################################
+config:
+  log:
+    logstashServiceName: log-ls
+    logstashPort: 5044
+  mysqlPassword: strong_pitchou
+  dataRootDir: /dockerdata-nfs
+  springApplicationJson: >
+    {
+        "spring.datasource.cldsdb.url": "jdbc:mariadb:sequential://clampdb.{{ include "common.namespace" . }}:3306/cldsdb4?autoReconnect=true&connectTimeout=10000&socketTimeout=10000&retriesAllDown=3",
+        "clamp.config.sdc.catalog.url": "http://sdc-be.{{ include "common.namespace" . }}:8080/sdc/v1/catalog/",
+        "clamp.config.sdc.hostUrl": "http://sdc-be.{{ include "common.namespace" . }}:8080/",
+        "clamp.config.sdc.serviceUrl": "http://sdc-be.{{ include "common.namespace" . }}:8080/sdc/v1/catalog/services",
+        "clamp.config.sdc.serviceUsername": "clamp",
+        "clamp.config.sdc.servicePassword": "b7acccda32b98c5bb7acccda32b98c5b05D511BD6D93626E90D18E9D24D9B78CD34C7EE8012F0A189A28763E82271E50A5D4EC10C7D93E06E0A2D27CAE66B981",
+        "clamp.config.files.sdcController": "file:/opt/clamp/sdc-controllers-config.json",
+        "clamp.config.dcae.inventory.url": "https://inventory.{{ include "common.namespace" . }}:8080",
+        "clamp.config.dcae.dispatcher.url": "https4://deployment-handler.{{ include "common.namespace" . }}:8443",
+        "clamp.config.dcae.deployment.url": "https4://deployment-handler.{{ include "common.namespace" . }}:8443",
+        "clamp.config.dcae.deployment.userName": "none",
+        "clamp.config.dcae.deployment.password": "none",
+        "clamp.config.policy.api.url": "https4://policy-api.{{ include "common.namespace" . }}:6969",
+        "clamp.config.policy.api.userName": "healthcheck",
+        "clamp.config.policy.api.password": "zb!XztG34",
+        "clamp.config.policy.pap.url": "https4://policy-pap.{{ include "common.namespace" . }}:6969",
+        "clamp.config.policy.pap.userName": "healthcheck",
+        "clamp.config.policy.pap.password": "zb!XztG34",
+        "clamp.config.policy.pdpUrl1": "https://pdp.{{ include "common.namespace" . }}:8081/pdp/ , testpdp, alpha123",
+        "clamp.config.policy.pdpUrl2": "https://pdp.{{ include "common.namespace" . }}:8081/pdp/ , testpdp, alpha123",
+        "clamp.config.policy.papUrl": "https://pap.{{ include "common.namespace" . }}:9091/pap/ , testpap, alpha123",
+        "clamp.config.policy.clientKey": "dGVzdA==",
+        "clamp.config.cadi.aafLocateUrl": "https://aaf-locate.{{ include "common.namespace" . }}:8095",
+        "com.att.eelf.logging.path": "/opt/clamp",
+        "com.att.eelf.logging.file": "logback.xml"
+    }
+
+# default number of instances
+replicaCount: 1
+
+nodeSelector: {}
+
+affinity: {}
+
+# probe configuration parameters
+liveness:
+  initialDelaySeconds: 120
+  periodSeconds: 10
+  # necessary to disable liveness probe when setting breakpoints
+  # in debugger so K8s doesn't restart unresponsive container
+  enabled: true
+
+readiness:
+  initialDelaySeconds: 10
+  periodSeconds: 10
+
+
+service:
+  type: ClusterIP
+  name: clamp-backend
+  portName: clamp-backend
+  internalPort: 8443
+  externalPort: 443
+
+ingress:
+  enabled: false
+
+#resources: {}
+  # We usually recommend not to specify default resources and to leave this as a conscious
+  # choice for the user. This also increases chances charts run on environments with little
+  # resources, such as Minikube. If you do want to specify resources, uncomment the following
+  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+  #
+  # Example:
+  # Configure resource requests and limits
+  # ref: http://kubernetes.io/docs/user-guide/compute-resources/
+  # Minimum memory for development is 2 CPU cores and 4GB memory
+  # Minimum memory for production is 4 CPU cores and 8GB memory
+resources:
+  small:
+    limits:
+      cpu: 1
+      memory: 1.2Gi
+    requests:
+      cpu: 10m
+      memory: 800Mi
+  large:
+    limits:
+      cpu: 1
+      memory: 1.2Gi
+    requests:
+      cpu: 10m
+      memory: 800Mi
+  unlimited: {}