[APPC] Uses new tpls for repos / images

This commit makes APPC chart to use the new generator for repositories and
images.
As new templates doesn't work well with "sub charts", we move also
subcharts to components folder.

Issue-ID: OOM-2364
Signed-off-by: Sylvain Desbureaux <sylvain.desbureaux@orange.com>
Change-Id: I31178186d08926ae708261e84debb5bf49562b7a

4 files changed, 0 insertions, 164 deletions

diff --git a/kubernetes/appc/charts/appc-cdt/templates/NOTES.txt b/kubernetes/appc/charts/appc-cdt/templates/NOTES.txt
deleted file mode 100644
index 1a7dbc5d13..0000000000
--- a/kubernetes/appc/charts/appc-cdt/templates/NOTES.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-# Copyright © 2018  AT&T, Amdocs, Bell Canada Intellectual Property.  All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-1. Get the application URL by running these commands:
-{{- if .Values.ingress.enabled }}
-{{- range .Values.ingress.hosts }}
-  http://{{ . }}
-{{- end }}
-{{- else if contains "NodePort" .Values.service.type }}
-  export NODE_PORT=$(kubectl get --namespace {{ include "common.namespace" . }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "common.fullname" . }})
-  export NODE_IP=$(kubectl get nodes --namespace {{ include "common.namespace" . }} -o jsonpath="{.items[0].status.addresses[0].address}")
-  echo http://$NODE_IP:$NODE_PORT
-{{- else if contains "LoadBalancer" .Values.service.type }}
-     NOTE: It may take a few minutes for the LoadBalancer IP to be available.
-           You can watch the status of by running 'kubectl get svc -w {{ include "common.fullname" . }}'
-  export SERVICE_IP=$(kubectl get svc --namespace {{ include "common.namespace" . }} {{ include "common.fullname" . }} -o jsonpath='{.status.loadBalancer.ingress[0].ip}')
-  echo http://$SERVICE_IP:{{ .Values.service.externalPort }}
-{{- else if contains "ClusterIP" .Values.service.type }}
-  export POD_NAME=$(kubectl get pods --namespace {{ include "common.namespace" . }} -l "app={{ include "common.fullname" . }},release={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
-  echo "Visit http://127.0.0.1:8080 to use your application"
-  kubectl port-forward $POD_NAME 8080:{{ .Values.service.internalPort }}
-{{- end }}
diff --git a/kubernetes/appc/charts/appc-cdt/templates/deployment.yaml b/kubernetes/appc/charts/appc-cdt/templates/deployment.yaml
deleted file mode 100644
index 3ccea21cc5..0000000000
--- a/kubernetes/appc/charts/appc-cdt/templates/deployment.yaml
+++ /dev/null
@@ -1,87 +0,0 @@
-{{/*
-# Copyright © 2018  AT&T, Amdocs, Bell Canada Intellectual Property.  All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-*/}}
-
-apiVersion: apps/v1
-kind: Deployment
-metadata:
-  name: {{ include "common.fullname" . }}
-  namespace: {{ include "common.namespace" . }}
-  labels:
-    app: {{ include "common.name" . }}
-    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
-    release: {{ include "common.release" . }}
-    heritage: {{ .Release.Service }}
-spec:
-  selector:
-    matchLabels:
-      app: {{ include "common.name" . }}
-  replicas: {{ .Values.replicaCount }}
-  template:
-    metadata:
-      labels:
-        app: {{ include "common.name" . }}
-        release: {{ include "common.release" . }}
-    spec:
-      initContainers:
-      containers:
-        - name: {{ include "common.name" . }}
-          image: "{{ include "common.repository" . }}/{{ .Values.image }}"
-          imagePullPolicy: {{ .Values.global.pullPolicy | default .Values.pullPolicy }}
-          command:
-          - /opt/startCdt.sh
-          ports:
-          - containerPort: {{ .Values.service.internalPort }}
-            name: {{ .Values.service.name }}
-          # disable liveness probe when breakpoints set in debugger
-          # so K8s doesn't restart unresponsive container
-          {{- if eq .Values.liveness.enabled true }}
-          livenessProbe:
-            tcpSocket:
-              port: {{ .Values.service.internalPort }}
-            initialDelaySeconds: {{ .Values.liveness.initialDelaySeconds }}
-            periodSeconds: {{ .Values.liveness.periodSeconds }}
-          {{ end -}}
-          readinessProbe:
-            tcpSocket:
-              port: {{ .Values.service.internalPort }}
-            initialDelaySeconds: {{ .Values.readiness.initialDelaySeconds }}
-            periodSeconds: {{ .Values.readiness.periodSeconds }}
-          env:
-          # This sets the port that CDT will use to connect to the main appc container.
-          # The 11 is the node port suffix that is used in the main appc oom templates
-          # for nodePort3. This value will be configured in appc main chart in appc-cdt section.
-          - name: CDT_PORT
-            value: "{{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.nodePort3 }}"
-          volumeMounts:
-          - mountPath: /etc/localtime
-            name: localtime
-            readOnly: true
-          resources:
-{{ include "common.resources" . | indent 12 }}
-        {{- if .Values.nodeSelector }}
-        nodeSelector:
-{{ toYaml .Values.nodeSelector | indent 10 }}
-        {{- end -}}
-        {{- if .Values.affinity }}
-        affinity:
-{{ toYaml .Values.affinity | indent 10 }}
-        {{- end }}
-      volumes:
-        - name: localtime
-          hostPath:
-            path: /etc/localtime
-      imagePullSecrets:
-      - name: "{{ include "common.namespace" . }}-docker-registry-key"
diff --git a/kubernetes/appc/charts/appc-cdt/templates/ingress.yaml b/kubernetes/appc/charts/appc-cdt/templates/ingress.yaml
deleted file mode 100644
index 8f87c68f1e..0000000000
--- a/kubernetes/appc/charts/appc-cdt/templates/ingress.yaml
+++ /dev/null
@@ -1 +0,0 @@
-{{ include "common.ingress" . }}
diff --git a/kubernetes/appc/charts/appc-cdt/templates/service.yaml b/kubernetes/appc/charts/appc-cdt/templates/service.yaml
deleted file mode 100644
index 54e239ebc5..0000000000
--- a/kubernetes/appc/charts/appc-cdt/templates/service.yaml
+++ /dev/null
@@ -1,43 +0,0 @@
-{{/*
-# Copyright © 2018  AT&T, Amdocs, Bell Canada Intellectual Property.  All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#       http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-*/}}
-
-apiVersion: v1
-kind: Service
-metadata:
-  name: {{ .Values.service.name }}
-  namespace: {{ include "common.namespace" . }}
-  labels:
-    app: {{ include "common.name" . }}
-    chart: {{ .Chart.Name }}-{{ .Chart.Version | replace "+" "_" }}
-    release: {{ include "common.release" . }}
-    heritage: {{ .Release.Service }}
-  annotations:
-spec:
-  type: {{ .Values.service.type }}
-  ports:
-    {{if eq .Values.service.type "NodePort" -}}
-    - port: {{ .Values.service.externalPort }}
-      targetPort: {{ .Values.service.internalPort }}
-      nodePort: {{ .Values.global.nodePortPrefix | default .Values.nodePortPrefix }}{{ .Values.service.nodePort }}
-      name: {{ .Values.service.name }}
-    {{- else -}}
-    - port: {{ .Values.service.externalPort }}
-      targetPort: {{ .Values.service.internalPort }}
-      name: {{ .Values.service.name }}
-    {{- end}}
-  selector:
-    app: {{ include "common.name" . }}
-    release: {{ include "common.release" . }}