[AAI] Reintegrate AAI OOM charts in main repo

AAI chart is currently in its own directory. As a lot will be done in
the charts with tight coordination between "common" part and components
parts, it's a lot easier to have everything in a same place for now.

Issue-ID: OOM-2513
Signed-off-by: Sylvain Desbureaux <sylvain.desbureaux@orange.com>
Change-Id: I5e27f7de286bf74e6d3a443e1cb31f63b3d83265
[Update aai to commit 18d4bd165e12cb4d03baa318e506f0dda381cd89]
Signed-off-by: Krzysztof Opasiak <k.opasiak@samsung.com>

1 files changed, 382 insertions, 0 deletions

diff --git a/kubernetes/aai/values.yaml b/kubernetes/aai/values.yaml
new file mode 100644
index 0000000000..c0f0999d0c
--- /dev/null
+++ b/kubernetes/aai/values.yaml
@@ -0,0 +1,382 @@
+# Copyright (c) 2017 Amdocs, Bell Canada
+# Modifications Copyright (c) 2018 AT&T
+# Modifications Copyright (c) 2020 Nokia
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#       http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# Default values for aai.
+# This is a YAML-formatted file.
+# Declare variables to be passed into your templates.
+global: # global defaults
+  nodePortPrefix: 302
+  repository: nexus3.onap.org:10001
+  dockerhubRepository: docker.io
+  busyboxImage: busybox
+
+  readinessImage: onap/oom/readiness:3.0.1
+
+  loggingRepository: docker.elastic.co
+  loggingImage: beats/filebeat:5.5.0
+
+  restartPolicy: Always
+
+  installSidecarSecurity: false
+  aafEnabled: true
+
+  fproxy:
+    name: forward-proxy
+    activeSpringProfiles: noHostVerification,cadi
+    image: onap/fproxy:2.1.13
+    port: 10680
+
+  rproxy:
+    name: reverse-proxy
+    activeSpringProfiles: noHostVerification,cadi
+    image: onap/rproxy:2.1.13
+    port: 10692
+
+  tproxyConfig:
+    name: init-tproxy-config
+    image: onap/tproxy-config:2.1.13
+
+  # AAF server details. Only needed if the AAF DNS does not resolve from the pod
+  aaf:
+    serverIp: 10.12.6.214
+    serverHostname: aaf.osaaf.org
+    serverPort: 30247
+
+  cassandra:
+    #This will instantiate AAI cassandra cluster, default:shared cassandra.
+    localCluster: false
+
+    #Service Name of the cassandra cluster to connect to.
+    #Override it to aai-cassandra if localCluster is enabled.
+    serviceName: cassandra
+
+    #This should be same as shared cassandra instance or if localCluster is enabled
+    #then it should be same as aai-cassandra replicaCount
+    replicas: 3
+
+    #Cassanara login details
+    username: cassandra
+    password: cassandra
+
+  aai:
+    serviceName: aai
+  babel:
+    serviceName: aai-babel
+  aaiElasticsearch:
+    serviceName: aai-elasticsearch
+  resources:
+    serviceName: aai-resources
+  sparkyBe:
+    serviceName: aai-sparky-be
+  dataRouter:
+    serviceName: aai-data-router
+  gizmo:
+    serviceName: aai-gizmo
+  modelloader:
+    serviceName: aai-modelloader
+  searchData:
+    serviceName: aai-search-data
+  traversal:
+    serviceName: aai-traversal
+  graphadmin:
+    serviceName: aai-graphadmin
+  spike:
+    serviceName: aai-spike
+
+  initContainers:
+    enabled: true
+  # Specifies a list of jobs to be run
+  jobs:
+    # When enabled, it will create the schema based on oxm and edge rules
+    createSchema:
+      enabled: true
+    # When enabled, it will create the widget models via REST API to haproxy
+    updateQueryData:
+      enabled: true
+    #migration using helm hooks
+    migration:
+      enabled: false
+      remoteCassandra:
+        enabled: false
+        storage:
+          backend: cassandra
+          hostname: 10.10.10.10
+          connectionTimeout: 100000
+          cacheSize: 1000000
+          keyConsistent: true
+
+          #If backend is cql or cassandra it should be keyspace name
+          #else backend is hbase it should be hbase table name
+          name: aaigraph
+
+       ## CQL driver specific properties for janusgraph
+       #  cql:
+       #    #Name of the Cassandra Cluster
+       #    cluster: someclustername
+       #    readConsistency: QUORUM
+       #    writeConsistency: QUORUM
+       #    replicationFactor: 3
+       #    localConsistencyForSysOps: true
+
+       ## Cassandra driver specific properties for janusgraph
+          cassandra:
+            #Name of the Cassandra Cluster
+            clusterName: aai-cluster
+            localDataCenter: Pod lab
+            readConsistency: LOCAL_QUORUM
+            writeConsistency: LOCAL_QUORUM
+            replicationFactor: 3
+
+        #storage:
+        #  backend: cassandra
+        #  hostname: somehost1,somehost2,somehost3
+        #  connectionTimeout: 100000
+        #  cacheSize: 1000000
+        #  clusterName: someClusterName
+        #  localDataCenter: someDataCenter
+        #  keyConsistent: true
+        #  #If backend is cql or cassandra it should be keyspace name
+        #  #else backend is hbase it should be hbase table name
+        #  name: your_hbase_table_or_keyspace_name
+
+        ## CQL driver specific properties for janusgraph
+        #  cql:
+        #    #Name of the Cassandra Cluster
+        #    cluster: someclustername
+        #    readConsistency: QUORUM
+        #    writeConsistency: QUORUM
+        #    replicationFactor: 3
+        #    localConsistencyForSysOps: true
+
+        ## Cassandra driver specific properties for janusgraph
+        #  cassandra:
+        #    #Name of the Cassandra Cluster
+        #    cluster: someclustername
+        #    readConsistency: LOCAL_QUORUM
+        #    writeConsistency: LOCAL_QUORUM
+        #    replicationFactor: 3
+
+
+  # Common configuration for resources traversal and graphadmin
+  config:
+    # User information for the admin user in container
+    userId: 1000
+    groupId: 1000
+
+    # Specifies that the cluster connected to a dynamic
+    # cluster being spinned up by kubernetes deployment
+    cluster:
+      cassandra:
+        dynamic: true
+
+    # If cluster.cassandra.dynamic is set to false
+    # Then the following configuration should be uncommented
+    # This is if you are planning to connect to a existing
+    # Cassandra cluster instead of doing the deployment
+    #storage:
+    #  backend: cassandra
+    #  hostname: somehost1,somehost2,somehost3
+    #  connectionTimeout: 100000
+    #  cacheSize: 1000000
+    #  clusterName: someClusterName
+    #  localDataCenter: someDataCenter
+    #  keyConsistent: true
+    #  # If backend is cql or cassandra it should be keyspace name
+    #  # else backend is hbase it should be hbase table name
+    #  name: your_hbase_table_or_keyspace_name
+
+    #  # CQL driver specific properties for janusgraph
+    #  cql:
+    #    # Name of the Cassandra Cluster
+    #    cluster: someclustername
+    #    readConsistency: QUORUM
+    #    writeConsistency: QUORUM
+    #    replicationFactor: 3
+    #    localConsistencyForSysOps: true
+
+    #  # Cassandra driver specific properties for janusgraph
+    #  cassandra:
+    #    # Name of the Cassandra Cluster
+    #    cluster: someclustername
+    #    readConsistency: LOCAL_QUORUM
+    #    writeConsistency: LOCAL_QUORUM
+    #    replicationFactor: 3
+
+    # Specifies if the basic authorization is enabled
+    basic:
+      auth:
+        enabled: true
+        username: AAI
+        passwd: AAI
+
+    # Active spring profiles for the resources microservice
+    profiles:
+      active: production,dmaap,aaf-auth
+
+    # Notification event specific properties
+    notification:
+      eventType: AAI-EVENT
+      domain: dev
+
+    # Schema specific properties that include supported versions of api
+    schema:
+      # Specifies if the connection should be one way ssl, two way ssl or no auth
+      service:
+        client: one-way-ssl
+      # Specifies which translator to use if it has schema-service, then it will make a rest request to schema service
+      translator:
+        list: schema-service
+      source:
+        # Specifies which folder to take a look at
+        name: onap
+      uri:
+        # Base URI Path of the application
+        base:
+          path: /aai
+      version:
+        # Current version of the REST API
+        api:
+          default: v21
+        # Specifies which version the depth parameter is configurable
+        depth: v11
+        # List of all the supported versions of the API
+        list: v11,v12,v13,v14,v15,v16,v17,v18,v19,v20,v21
+        # Specifies from which version related link should appear
+        related:
+          link: v11
+        # Specifies from which version the app root change happened
+        app:
+          root: v11
+        # Specifies from which version the xml namespace changed
+        namespace:
+          change: v12
+        # Specifies from which version the edge label appeared in API
+        edge:
+          label: v12
+
+    # Keystore configuration password and filename
+    keystore:
+      filename: aai_keystore
+      passwd: OBF:1vn21ugu1saj1v9i1v941sar1ugw1vo0
+
+    # Truststore configuration password and filename
+    truststore:
+      filename: aai_keystore
+      passwd: OBF:1vn21ugu1saj1v9i1v941sar1ugw1vo0
+
+    # Specifies a list of files to be included in auth volume
+    auth:
+      files:
+        - aai_keystore
+
+    # Specifies which clients should always default to realtime graph connection
+    realtime:
+      clients: SDNC,MSO,SO,robot-ete
+
+    # Logback debug enabled
+    logback:
+      console:
+        # If enabled, container will print all logback to standard output
+        # This will make debugging much easier but it should only be done
+        # when debugging the issue and changed back as it can affect performance
+        # since when this is enabled, it prints a lot of information to console
+        enabled: false
+
+# application image
+dockerhubRepository: registry.hub.docker.com
+image: aaionap/haproxy:1.4.2
+pullPolicy: Always
+
+flavor: small
+flavorOverride: small
+
+# flag to enable debugging - application support required
+debugEnabled: false
+
+# application configuration
+config:
+  logstashServiceName: log-ls
+  logstashPort: 5044
+
+# default number of instances
+replicaCount: 1
+
+nodeSelector: {}
+
+affinity: {}
+
+# probe configuration parameters
+liveness:
+  initialDelaySeconds: 10
+  periodSeconds: 10
+  # necessary to disable liveness probe when setting breakpoints
+  # in debugger so K8s doesn't restart unresponsive container
+  enabled: true
+
+#This section is used when localCluster is enabled. AAI will create its own cassandra cluster for its specific use.
+#Below command will instantiate the aai cassandra instances:
+#helm deploy demo local/onap --version=4.0.0 --namespace onap --set aai.enabled=true \
+#                            --set aai.global.cassandra.localCluster=true \
+#                            --set aai.global.cassandra.serviceName=aai-cassandra
+cassandra:
+  nameOverride: aai-cassandra
+  replicaCount: 3
+  service:
+    name: aai-cassandra
+  persistence:
+    mountSubPath: aai/cassandra
+    enabled: true
+
+readiness:
+  initialDelaySeconds: 10
+  periodSeconds: 10
+
+service:
+  type: NodePort
+  portName: aai-ssl
+  externalPort: 8443
+  internalPort: 8443
+  nodePort: 33
+  # POLICY hotfix - Note this must be temporary
+  # See https://jira.onap.org/browse/POLICY-510
+  aaiServiceClusterIp:
+
+ingress:
+  enabled: false
+  service:
+    - baseaddr: "aai.api"
+      name: "aai"
+      port: 8443
+  config:
+    ssl: "redirect"
+
+resources:
+  small:
+    limits:
+      cpu: 2
+      memory: 4Gi
+    requests:
+      cpu: 1
+      memory: 1Gi
+  large:
+    limits:
+      cpu: 4
+      memory: 8Gi
+    requests:
+      cpu: 2
+      memory: 2Gi
+  unlimited: {}
+