From a7512128b6eb91ac745dc6130a841910e31eb413 Mon Sep 17 00:00:00 2001 From: Thomas Nelson Date: Wed, 19 Feb 2020 13:28:09 -0500 Subject: Fix Broken Docker Builds Update Pom files and Directory Structure. Issue-ID: MUSIC-561 Signed-off-by: Thomas Nelson Change-Id: I3325b20cc4345e67a356a5cbb1bce7d45904be02 --- distribution/cassandra/cassandra.yaml | 1002 --------------------------------- 1 file changed, 1002 deletions(-) delete mode 100644 distribution/cassandra/cassandra.yaml (limited to 'distribution/cassandra/cassandra.yaml') diff --git a/distribution/cassandra/cassandra.yaml b/distribution/cassandra/cassandra.yaml deleted file mode 100644 index fa7c74a6..00000000 --- a/distribution/cassandra/cassandra.yaml +++ /dev/null @@ -1,1002 +0,0 @@ -# Cassandra storage config YAML - -# NOTE: -# See http://wiki.apache.org/cassandra/StorageConfiguration for -# full explanations of configuration directives -# /NOTE - -# The name of the cluster. This is mainly used to prevent machines in -# one logical cluster from joining another. -cluster_name: 'Test Cluster' - -# This defines the number of tokens randomly assigned to this node on the ring -# The more tokens, relative to other nodes, the larger the proportion of data -# that this node will store. You probably want all nodes to have the same number -# of tokens assuming they have equal hardware capability. -# -# If you leave this unspecified, Cassandra will use the default of 1 token for legacy compatibility, -# and will use the initial_token as described below. -# -# Specifying initial_token will override this setting on the node's initial start, -# on subsequent starts, this setting will apply even if initial token is set. -# -# If you already have a cluster with 1 token per node, and wish to migrate to -# multiple tokens per node, see http://wiki.apache.org/cassandra/Operations -num_tokens: 256 - -# Triggers automatic allocation of num_tokens tokens for this node. The allocation -# algorithm attempts to choose tokens in a way that optimizes replicated load over -# the nodes in the datacenter for the replication strategy used by the specified -# keyspace. -# -# The load assigned to each node will be close to proportional to its number of -# vnodes. -# -# Only supported with the Murmur3Partitioner. -# allocate_tokens_for_keyspace: KEYSPACE - -# initial_token allows you to specify tokens manually. While you can use # it with -# vnodes (num_tokens > 1, above) -- in which case you should provide a -# comma-separated list -- it's primarily used when adding nodes # to legacy clusters -# that do not have vnodes enabled. -# initial_token: - -# See http://wiki.apache.org/cassandra/HintedHandoff -# May either be "true" or "false" to enable globally -hinted_handoff_enabled: true -# When hinted_handoff_enabled is true, a black list of data centers that will not -# perform hinted handoff -#hinted_handoff_disabled_datacenters: -# - DC1 -# - DC2 -# this defines the maximum amount of time a dead host will have hints -# generated. After it has been dead this long, new hints for it will not be -# created until it has been seen alive and gone down again. -max_hint_window_in_ms: 10800000 # 3 hours - -# Maximum throttle in KBs per second, per delivery thread. This will be -# reduced proportionally to the number of nodes in the cluster. (If there -# are two nodes in the cluster, each delivery thread will use the maximum -# rate; if there are three, each will throttle to half of the maximum, -# since we expect two nodes to be delivering hints simultaneously.) -hinted_handoff_throttle_in_kb: 1024 - -# Number of threads with which to deliver hints; -# Consider increasing this number when you have multi-dc deployments, since -# cross-dc handoff tends to be slower -max_hints_delivery_threads: 2 - -# Directory where Cassandra should store hints. -# If not set, the default directory is $CASSANDRA_HOME/data/hints. -# hints_directory: /var/lib/cassandra/hints - -# How often hints should be flushed from the internal buffers to disk. -# Will *not* trigger fsync. -hints_flush_period_in_ms: 10000 - -# Maximum size for a single hints file, in megabytes. -max_hints_file_size_in_mb: 128 - -# Compression to apply to the hint files. If omitted, hints files -# will be written uncompressed. LZ4, Snappy, and Deflate compressors -# are supported. -#hints_compression: -# - class_name: LZ4Compressor -# parameters: -# - - -# Maximum throttle in KBs per second, total. This will be -# reduced proportionally to the number of nodes in the cluster. -batchlog_replay_throttle_in_kb: 1024 - -# Authentication backend, implementing IAuthenticator; used to identify users -# Out of the box, Cassandra provides org.apache.cassandra.auth.{AllowAllAuthenticator, -# PasswordAuthenticator}. -# -# - AllowAllAuthenticator performs no checks - set it to disable authentication. -# - PasswordAuthenticator relies on username/password pairs to authenticate -# users. It keeps usernames and hashed passwords in system_auth.roles table. -# Please increase system_auth keyspace replication factor if you use this authenticator. -# If using PasswordAuthenticator, CassandraRoleManager must also be used (see below) -authenticator: PasswordAuthenticator - -# Authorization backend, implementing IAuthorizer; used to limit access/provide permissions -# Out of the box, Cassandra provides org.apache.cassandra.auth.{AllowAllAuthorizer, -# CassandraAuthorizer}. -# -# - AllowAllAuthorizer allows any action to any user - set it to disable authorization. -# - CassandraAuthorizer stores permissions in system_auth.role_permissions table. Please -# increase system_auth keyspace replication factor if you use this authorizer. -authorizer: CassandraAuthorizer - -# Part of the Authentication & Authorization backend, implementing IRoleManager; used -# to maintain grants and memberships between roles. -# Out of the box, Cassandra provides org.apache.cassandra.auth.CassandraRoleManager, -# which stores role information in the system_auth keyspace. Most functions of the -# IRoleManager require an authenticated login, so unless the configured IAuthenticator -# actually implements authentication, most of this functionality will be unavailable. -# -# - CassandraRoleManager stores role data in the system_auth keyspace. Please -# increase system_auth keyspace replication factor if you use this role manager. -role_manager: CassandraRoleManager - -# Validity period for roles cache (fetching permissions can be an -# expensive operation depending on the authorizer). Granted roles are cached for -# authenticated sessions in AuthenticatedUser and after the period specified -# here, become eligible for (async) reload. -# Defaults to 2000, set to 0 to disable. -# Will be disabled automatically for AllowAllAuthenticator. -roles_validity_in_ms: 2000 - -# Refresh interval for roles cache (if enabled). -# After this interval, cache entries become eligible for refresh. Upon next -# access, an async reload is scheduled and the old value returned until it -# completes. If roles_validity_in_ms is non-zero, then this must be -# also. -# Defaults to the same value as roles_validity_in_ms. -# roles_update_interval_in_ms: 1000 - -# Validity period for permissions cache (fetching permissions can be an -# expensive operation depending on the authorizer, CassandraAuthorizer is -# one example). Defaults to 2000, set to 0 to disable. -# Will be disabled automatically for AllowAllAuthorizer. -permissions_validity_in_ms: 2000 - -# Refresh interval for permissions cache (if enabled). -# After this interval, cache entries become eligible for refresh. Upon next -# access, an async reload is scheduled and the old value returned until it -# completes. If permissions_validity_in_ms is non-zero, then this must be -# also. -# Defaults to the same value as permissions_validity_in_ms. -# permissions_update_interval_in_ms: 1000 - -# The partitioner is responsible for distributing groups of rows (by -# partition key) across nodes in the cluster. You should leave this -# alone for new clusters. The partitioner can NOT be changed without -# reloading all data, so when upgrading you should set this to the -# same partitioner you were already using. -# -# Besides Murmur3Partitioner, partitioners included for backwards -# compatibility include RandomPartitioner, ByteOrderedPartitioner, and -# OrderPreservingPartitioner. -# -partitioner: org.apache.cassandra.dht.Murmur3Partitioner - -# Directories where Cassandra should store data on disk. Cassandra -# will spread data evenly across them, subject to the granularity of -# the configured compaction strategy. -# If not set, the default directory is $CASSANDRA_HOME/data/data. -data_file_directories: - - /var/lib/cassandra/data - -# commit log. when running on magnetic HDD, this should be a -# separate spindle than the data directories. -# If not set, the default directory is $CASSANDRA_HOME/data/commitlog. -commitlog_directory: /var/lib/cassandra/commitlog - -# policy for data disk failures: -# die: shut down gossip and client transports and kill the JVM for any fs errors or -# single-sstable errors, so the node can be replaced. -# stop_paranoid: shut down gossip and client transports even for single-sstable errors, -# kill the JVM for errors during startup. -# stop: shut down gossip and client transports, leaving the node effectively dead, but -# can still be inspected via JMX, kill the JVM for errors during startup. -# best_effort: stop using the failed disk and respond to requests based on -# remaining available sstables. This means you WILL see obsolete -# data at CL.ONE! -# ignore: ignore fatal errors and let requests fail, as in pre-1.2 Cassandra -disk_failure_policy: stop - -# policy for commit disk failures: -# die: shut down gossip and Thrift and kill the JVM, so the node can be replaced. -# stop: shut down gossip and Thrift, leaving the node effectively dead, but -# can still be inspected via JMX. -# stop_commit: shutdown the commit log, letting writes collect but -# continuing to service reads, as in pre-2.0.5 Cassandra -# ignore: ignore fatal errors and let the batches fail -commit_failure_policy: stop - -# Maximum size of the key cache in memory. -# -# Each key cache hit saves 1 seek and each row cache hit saves 2 seeks at the -# minimum, sometimes more. The key cache is fairly tiny for the amount of -# time it saves, so it's worthwhile to use it at large numbers. -# The row cache saves even more time, but must contain the entire row, -# so it is extremely space-intensive. It's best to only use the -# row cache if you have hot rows or static rows. -# -# NOTE: if you reduce the size, you may not get you hottest keys loaded on startup. -# -# Default value is empty to make it "auto" (min(5% of Heap (in MB), 100MB)). Set to 0 to disable key cache. -key_cache_size_in_mb: - -# Duration in seconds after which Cassandra should -# save the key cache. Caches are saved to saved_caches_directory as -# specified in this configuration file. -# -# Saved caches greatly improve cold-start speeds, and is relatively cheap in -# terms of I/O for the key cache. Row cache saving is much more expensive and -# has limited use. -# -# Default is 14400 or 4 hours. -key_cache_save_period: 14400 - -# Number of keys from the key cache to save -# Disabled by default, meaning all keys are going to be saved -# key_cache_keys_to_save: 100 - -# Row cache implementation class name. -# Available implementations: -# org.apache.cassandra.cache.OHCProvider Fully off-heap row cache implementation (default). -# org.apache.cassandra.cache.SerializingCacheProvider This is the row cache implementation availabile -# in previous releases of Cassandra. -# row_cache_class_name: org.apache.cassandra.cache.OHCProvider - -# Maximum size of the row cache in memory. -# Please note that OHC cache implementation requires some additional off-heap memory to manage -# the map structures and some in-flight memory during operations before/after cache entries can be -# accounted against the cache capacity. This overhead is usually small compared to the whole capacity. -# Do not specify more memory that the system can afford in the worst usual situation and leave some -# headroom for OS block level cache. Do never allow your system to swap. -# -# Default value is 0, to disable row caching. -row_cache_size_in_mb: 0 - -# Duration in seconds after which Cassandra should save the row cache. -# Caches are saved to saved_caches_directory as specified in this configuration file. -# -# Saved caches greatly improve cold-start speeds, and is relatively cheap in -# terms of I/O for the key cache. Row cache saving is much more expensive and -# has limited use. -# -# Default is 0 to disable saving the row cache. -row_cache_save_period: 0 - -# Number of keys from the row cache to save. -# Specify 0 (which is the default), meaning all keys are going to be saved -# row_cache_keys_to_save: 100 - -# Maximum size of the counter cache in memory. -# -# Counter cache helps to reduce counter locks' contention for hot counter cells. -# In case of RF = 1 a counter cache hit will cause Cassandra to skip the read before -# write entirely. With RF > 1 a counter cache hit will still help to reduce the duration -# of the lock hold, helping with hot counter cell updates, but will not allow skipping -# the read entirely. Only the local (clock, count) tuple of a counter cell is kept -# in memory, not the whole counter, so it's relatively cheap. -# -# NOTE: if you reduce the size, you may not get you hottest keys loaded on startup. -# -# Default value is empty to make it "auto" (min(2.5% of Heap (in MB), 50MB)). Set to 0 to disable counter cache. -# NOTE: if you perform counter deletes and rely on low gcgs, you should disable the counter cache. -counter_cache_size_in_mb: - -# Duration in seconds after which Cassandra should -# save the counter cache (keys only). Caches are saved to saved_caches_directory as -# specified in this configuration file. -# -# Default is 7200 or 2 hours. -counter_cache_save_period: 7200 - -# Number of keys from the counter cache to save -# Disabled by default, meaning all keys are going to be saved -# counter_cache_keys_to_save: 100 - -# saved caches -# If not set, the default directory is $CASSANDRA_HOME/data/saved_caches. -saved_caches_directory: /var/lib/cassandra/saved_caches - -# commitlog_sync may be either "periodic" or "batch." -# -# When in batch mode, Cassandra won't ack writes until the commit log -# has been fsynced to disk. It will wait -# commitlog_sync_batch_window_in_ms milliseconds between fsyncs. -# This window should be kept short because the writer threads will -# be unable to do extra work while waiting. (You may need to increase -# concurrent_writes for the same reason.) -# -# commitlog_sync: batch -# commitlog_sync_batch_window_in_ms: 2 -# -# the other option is "periodic" where writes may be acked immediately -# and the CommitLog is simply synced every commitlog_sync_period_in_ms -# milliseconds. -commitlog_sync: periodic -commitlog_sync_period_in_ms: 10000 - -# The size of the individual commitlog file segments. A commitlog -# segment may be archived, deleted, or recycled once all the data -# in it (potentially from each columnfamily in the system) has been -# flushed to sstables. -# -# The default size is 32, which is almost always fine, but if you are -# archiving commitlog segments (see commitlog_archiving.properties), -# then you probably want a finer granularity of archiving; 8 or 16 MB -# is reasonable. -# Max mutation size is also configurable via max_mutation_size_in_kb setting in -# cassandra.yaml. The default is half the size commitlog_segment_size_in_mb * 1024. -# This should be positive and less than 2048. -# -# NOTE: If max_mutation_size_in_kb is set explicitly then commitlog_segment_size_in_mb must -# be set to at least twice the size of max_mutation_size_in_kb / 1024 -# -commitlog_segment_size_in_mb: 32 - -# Compression to apply to the commit log. If omitted, the commit log -# will be written uncompressed. LZ4, Snappy, and Deflate compressors -# are supported. -#commitlog_compression: -# - class_name: LZ4Compressor -# parameters: -# - - -# any class that implements the SeedProvider interface and has a -# constructor that takes a Map of parameters will do. -seed_provider: - # Addresses of hosts that are deemed contact points. - # Cassandra nodes use this list of hosts to find each other and learn - # the topology of the ring. You must change this if you are running - # multiple nodes! - - class_name: org.apache.cassandra.locator.SimpleSeedProvider - parameters: - # seeds is actually a comma-delimited list of addresses. - # Ex: ",," - - seeds: "127.0.0.1" - -# For workloads with more data than can fit in memory, Cassandra's -# bottleneck will be reads that need to fetch data from -# disk. "concurrent_reads" should be set to (16 * number_of_drives) in -# order to allow the operations to enqueue low enough in the stack -# that the OS and drives can reorder them. Same applies to -# "concurrent_counter_writes", since counter writes read the current -# values before incrementing and writing them back. -# -# On the other hand, since writes are almost never IO bound, the ideal -# number of "concurrent_writes" is dependent on the number of cores in -# your system; (8 * number_of_cores) is a good rule of thumb. -concurrent_reads: 32 -concurrent_writes: 32 -concurrent_counter_writes: 32 - -# For materialized view writes, as there is a read involved, so this should -# be limited by the less of concurrent reads or concurrent writes. -concurrent_materialized_view_writes: 32 - -# Maximum memory to use for pooling sstable buffers. Defaults to the smaller -# of 1/4 of heap or 512MB. This pool is allocated off-heap, so is in addition -# to the memory allocated for heap. Memory is only allocated as needed. -# file_cache_size_in_mb: 512 - -# Flag indicating whether to allocate on or off heap when the sstable buffer -# pool is exhausted, that is when it has exceeded the maximum memory -# file_cache_size_in_mb, beyond which it will not cache buffers but allocate on request. - -# buffer_pool_use_heap_if_exhausted: true - -# The strategy for optimizing disk read -# Possible values are: -# ssd (for solid state disks, the default) -# spinning (for spinning disks) -# disk_optimization_strategy: ssd - -# Total permitted memory to use for memtables. Cassandra will stop -# accepting writes when the limit is exceeded until a flush completes, -# and will trigger a flush based on memtable_cleanup_threshold -# If omitted, Cassandra will set both to 1/4 the size of the heap. -# memtable_heap_space_in_mb: 2048 -# memtable_offheap_space_in_mb: 2048 - -# Ratio of occupied non-flushing memtable size to total permitted size -# that will trigger a flush of the largest memtable. Larger mct will -# mean larger flushes and hence less compaction, but also less concurrent -# flush activity which can make it difficult to keep your disks fed -# under heavy write load. -# -# memtable_cleanup_threshold defaults to 1 / (memtable_flush_writers + 1) -# memtable_cleanup_threshold: 0.11 - -# Specify the way Cassandra allocates and manages memtable memory. -# Options are: -# heap_buffers: on heap nio buffers -# -# Note: offheap_buffers are not supported in Cassandra 3.0 - 3.3. -# They have been re-introduced in Cassandra 3.4. For details see -# https://issues.apache.org/jira/browse/CASSANDRA-9472 and -# https://issues.apache.org/jira/browse/CASSANDRA-11039 -memtable_allocation_type: heap_buffers - -# Total space to use for commit logs on disk. -# -# If space gets above this value, Cassandra will flush every dirty CF -# in the oldest segment and remove it. So a small total commitlog space -# will tend to cause more flush activity on less-active columnfamilies. -# -# The default value is the smaller of 8192, and 1/4 of the total space -# of the commitlog volume. -# -# commitlog_total_space_in_mb: 8192 - -# This sets the amount of memtable flush writer threads. These will -# be blocked by disk io, and each one will hold a memtable in memory -# while blocked. -# -# memtable_flush_writers defaults to the smaller of (number of disks, -# number of cores), with a minimum of 2 and a maximum of 8. -# -# If your data directories are backed by SSD, you should increase this -# to the number of cores. -#memtable_flush_writers: 8 - -# A fixed memory pool size in MB for for SSTable index summaries. If left -# empty, this will default to 5% of the heap size. If the memory usage of -# all index summaries exceeds this limit, SSTables with low read rates will -# shrink their index summaries in order to meet this limit. However, this -# is a best-effort process. In extreme conditions Cassandra may need to use -# more than this amount of memory. -index_summary_capacity_in_mb: - -# How frequently index summaries should be resampled. This is done -# periodically to redistribute memory from the fixed-size pool to sstables -# proportional their recent read rates. Setting to -1 will disable this -# process, leaving existing index summaries at their current sampling level. -index_summary_resize_interval_in_minutes: 60 - -# Whether to, when doing sequential writing, fsync() at intervals in -# order to force the operating system to flush the dirty -# buffers. Enable this to avoid sudden dirty buffer flushing from -# impacting read latencies. Almost always a good idea on SSDs; not -# necessarily on platters. -trickle_fsync: false -trickle_fsync_interval_in_kb: 10240 - -# TCP port, for commands and data -# For security reasons, you should not expose this port to the internet. Firewall it if needed. -storage_port: 7000 - -# SSL port, for encrypted communication. Unused unless enabled in -# encryption_options -# For security reasons, you should not expose this port to the internet. Firewall it if needed. -ssl_storage_port: 7001 - -# Address or interface to bind to and tell other Cassandra nodes to connect to. -# You _must_ change this if you want multiple nodes to be able to communicate! -# -# Set listen_address OR listen_interface, not both. Interfaces must correspond -# to a single address, IP aliasing is not supported. -# -# Leaving it blank leaves it up to InetAddress.getLocalHost(). This -# will always do the Right Thing _if_ the node is properly configured -# (hostname, name resolution, etc), and the Right Thing is to use the -# address associated with the hostname (it might not be). -# -# Setting listen_address to 0.0.0.0 is always wrong. -# -# If you choose to specify the interface by name and the interface has an ipv4 and an ipv6 address -# you can specify which should be chosen using listen_interface_prefer_ipv6. If false the first ipv4 -# address will be used. If true the first ipv6 address will be used. Defaults to false preferring -# ipv4. If there is only one address it will be selected regardless of ipv4/ipv6. -listen_address: localhost -# listen_interface: eth0 -# listen_interface_prefer_ipv6: false - -# Address to broadcast to other Cassandra nodes -# Leaving this blank will set it to the same value as listen_address -# broadcast_address: 1.2.3.4 - -# When using multiple physical network interfaces, set this -# to true to listen on broadcast_address in addition to -# the listen_address, allowing nodes to communicate in both -# interfaces. -# Ignore this property if the network configuration automatically -# routes between the public and private networks such as EC2. -# listen_on_broadcast_address: false - -# Internode authentication backend, implementing IInternodeAuthenticator; -# used to allow/disallow connections from peer nodes. -# internode_authenticator: org.apache.cassandra.auth.AllowAllInternodeAuthenticator - -# Whether to start the native transport server. -# Please note that the address on which the native transport is bound is the -# same as the rpc_address. The port however is different and specified below. -start_native_transport: true -# port for the CQL native transport to listen for clients on -# For security reasons, you should not expose this port to the internet. Firewall it if needed. -native_transport_port: 9042 -# Enabling native transport encryption in client_encryption_options allows you to either use -# encryption for the standard port or to use a dedicated, additional port along with the unencrypted -# standard native_transport_port. -# Enabling client encryption and keeping native_transport_port_ssl disabled will use encryption -# for native_transport_port. Setting native_transport_port_ssl to a different value -# from native_transport_port will use encryption for native_transport_port_ssl while -# keeping native_transport_port unencrypted. -# native_transport_port_ssl: 9142 -# The maximum threads for handling requests when the native transport is used. -# This is similar to rpc_max_threads though the default differs slightly (and -# there is no native_transport_min_threads, idle threads will always be stopped -# after 30 seconds). -# native_transport_max_threads: 128 -# -# The maximum size of allowed frame. Frame (requests) larger than this will -# be rejected as invalid. The default is 256MB. If you're changing this parameter, -# you may want to adjust max_value_size_in_mb accordingly. This should be positive and less than 2048. -# native_transport_max_frame_size_in_mb: 256 - -# The maximum number of concurrent client connections. -# The default is -1, which means unlimited. -# native_transport_max_concurrent_connections: -1 - -# The maximum number of concurrent client connections per source ip. -# The default is -1, which means unlimited. -# native_transport_max_concurrent_connections_per_ip: -1 - -# Whether to start the thrift rpc server. -#start_rpc: false -start_rpc: true - -# The address or interface to bind the Thrift RPC service and native transport -# server to. -# -# Set rpc_address OR rpc_interface, not both. Interfaces must correspond -# to a single address, IP aliasing is not supported. -# -# Leaving rpc_address blank has the same effect as on listen_address -# (i.e. it will be based on the configured hostname of the node). -# -# Note that unlike listen_address, you can specify 0.0.0.0, but you must also -# set broadcast_rpc_address to a value other than 0.0.0.0. -# -# For security reasons, you should not expose this port to the internet. Firewall it if needed. -# -# If you choose to specify the interface by name and the interface has an ipv4 and an ipv6 address -# you can specify which should be chosen using rpc_interface_prefer_ipv6. If false the first ipv4 -# address will be used. If true the first ipv6 address will be used. Defaults to false preferring -# ipv4. If there is only one address it will be selected regardless of ipv4/ipv6. -rpc_address: localhost -# rpc_interface: eth1 -# rpc_interface_prefer_ipv6: false - -# port for Thrift to listen for clients on -rpc_port: 9160 - -# RPC address to broadcast to drivers and other Cassandra nodes. This cannot -# be set to 0.0.0.0. If left blank, this will be set to the value of -# rpc_address. If rpc_address is set to 0.0.0.0, broadcast_rpc_address must -# be set. -# broadcast_rpc_address: 1.2.3.4 - -# enable or disable keepalive on rpc/native connections -rpc_keepalive: true - -# Cassandra provides two out-of-the-box options for the RPC Server: -# -# sync -> One thread per thrift connection. For a very large number of clients, memory -# will be your limiting factor. On a 64 bit JVM, 180KB is the minimum stack size -# per thread, and that will correspond to your use of virtual memory (but physical memory -# may be limited depending on use of stack space). -# -# hsha -> Stands for "half synchronous, half asynchronous." All thrift clients are handled -# asynchronously using a small number of threads that does not vary with the amount -# of thrift clients (and thus scales well to many clients). The rpc requests are still -# synchronous (one thread per active request). If hsha is selected then it is essential -# that rpc_max_threads is changed from the default value of unlimited. -# -# The default is sync because on Windows hsha is about 30% slower. On Linux, -# sync/hsha performance is about the same, with hsha of course using less memory. -# -# Alternatively, can provide your own RPC server by providing the fully-qualified class name -# of an o.a.c.t.TServerFactory that can create an instance of it. -rpc_server_type: sync - -# Uncomment rpc_min|max_thread to set request pool size limits. -# -# Regardless of your choice of RPC server (see above), the number of maximum requests in the -# RPC thread pool dictates how many concurrent requests are possible (but if you are using the sync -# RPC server, it also dictates the number of clients that can be connected at all). -# -# The default is unlimited and thus provides no protection against clients overwhelming the server. You are -# encouraged to set a maximum that makes sense for you in production, but do keep in mind that -# rpc_max_threads represents the maximum number of client requests this server may execute concurrently. -# -# rpc_min_threads: 16 -# rpc_max_threads: 2048 - -# uncomment to set socket buffer sizes on rpc connections -# rpc_send_buff_size_in_bytes: -# rpc_recv_buff_size_in_bytes: - -# Uncomment to set socket buffer size for internode communication -# Note that when setting this, the buffer size is limited by net.core.wmem_max -# and when not setting it it is defined by net.ipv4.tcp_wmem -# See: -# /proc/sys/net/core/wmem_max -# /proc/sys/net/core/rmem_max -# /proc/sys/net/ipv4/tcp_wmem -# /proc/sys/net/ipv4/tcp_wmem -# and: man tcp -# internode_send_buff_size_in_bytes: -# internode_recv_buff_size_in_bytes: - -# Frame size for thrift (maximum message length). -thrift_framed_transport_size_in_mb: 15 - -# Set to true to have Cassandra create a hard link to each sstable -# flushed or streamed locally in a backups/ subdirectory of the -# keyspace data. Removing these links is the operator's -# responsibility. -incremental_backups: false - -# Whether or not to take a snapshot before each compaction. Be -# careful using this option, since Cassandra won't clean up the -# snapshots for you. Mostly useful if you're paranoid when there -# is a data format change. -snapshot_before_compaction: false - -# Whether or not a snapshot is taken of the data before keyspace truncation -# or dropping of column families. The STRONGLY advised default of true -# should be used to provide data safety. If you set this flag to false, you will -# lose data on truncation or drop. -auto_snapshot: true - -# When executing a scan, within or across a partition, we need to keep the -# tombstones seen in memory so we can return them to the coordinator, which -# will use them to make sure other replicas also know about the deleted rows. -# With workloads that generate a lot of tombstones, this can cause performance -# problems and even exaust the server heap. -# (http://www.datastax.com/dev/blog/cassandra-anti-patterns-queues-and-queue-like-datasets) -# Adjust the thresholds here if you understand the dangers and want to -# scan more tombstones anyway. These thresholds may also be adjusted at runtime -# using the StorageService mbean. -tombstone_warn_threshold: 1000 -tombstone_failure_threshold: 100000 - -# Granularity of the collation index of rows within a partition. -# Increase if your rows are large, or if you have a very large -# number of rows per partition. The competing goals are these: -# 1) a smaller granularity means more index entries are generated -# and looking up rows withing the partition by collation column -# is faster -# 2) but, Cassandra will keep the collation index in memory for hot -# rows (as part of the key cache), so a larger granularity means -# you can cache more hot rows -column_index_size_in_kb: 64 - - -# Log WARN on any batch size exceeding this value. 5kb per batch by default. -# Caution should be taken on increasing the size of this threshold as it can lead to node instability. -batch_size_warn_threshold_in_kb: 5 - -# Fail any batch exceeding this value. 50kb (10x warn threshold) by default. -batch_size_fail_threshold_in_kb: 50 - -# Log WARN on any batches not of type LOGGED than span across more partitions than this limit -unlogged_batch_across_partitions_warn_threshold: 10 - -# Number of simultaneous compactions to allow, NOT including -# validation "compactions" for anti-entropy repair. Simultaneous -# compactions can help preserve read performance in a mixed read/write -# workload, by mitigating the tendency of small sstables to accumulate -# during a single long running compactions. The default is usually -# fine and if you experience problems with compaction running too -# slowly or too fast, you should look at -# compaction_throughput_mb_per_sec first. -# -# concurrent_compactors defaults to the smaller of (number of disks, -# number of cores), with a minimum of 2 and a maximum of 8. -# -# If your data directories are backed by SSD, you should increase this -# to the number of cores. -#concurrent_compactors: 1 - -# Throttles compaction to the given total throughput across the entire -# system. The faster you insert data, the faster you need to compact in -# order to keep the sstable count down, but in general, setting this to -# 16 to 32 times the rate you are inserting data is more than sufficient. -# Setting this to 0 disables throttling. Note that this account for all types -# of compaction, including validation compaction. -compaction_throughput_mb_per_sec: 16 - -# Log a warning when compacting partitions larger than this value -compaction_large_partition_warning_threshold_mb: 100 - -# When compacting, the replacement sstable(s) can be opened before they -# are completely written, and used in place of the prior sstables for -# any range that has been written. This helps to smoothly transfer reads -# between the sstables, reducing page cache churn and keeping hot rows hot -sstable_preemptive_open_interval_in_mb: 50 - -# Throttles all outbound streaming file transfers on this node to the -# given total throughput in Mbps. This is necessary because Cassandra does -# mostly sequential IO when streaming data during bootstrap or repair, which -# can lead to saturating the network connection and degrading rpc performance. -# When unset, the default is 200 Mbps or 25 MB/s. -# stream_throughput_outbound_megabits_per_sec: 200 - -# Throttles all streaming file transfer between the datacenters, -# this setting allows users to throttle inter dc stream throughput in addition -# to throttling all network stream traffic as configured with -# stream_throughput_outbound_megabits_per_sec -# When unset, the default is 200 Mbps or 25 MB/s -# inter_dc_stream_throughput_outbound_megabits_per_sec: 200 - -# How long the coordinator should wait for read operations to complete -read_request_timeout_in_ms: 5000 -# How long the coordinator should wait for seq or index scans to complete -range_request_timeout_in_ms: 15000 -# How long the coordinator should wait for writes to complete -write_request_timeout_in_ms: 2000 -# How long the coordinator should wait for counter writes to complete -counter_write_request_timeout_in_ms: 5000 -# How long a coordinator should continue to retry a CAS operation -# that contends with other proposals for the same row -cas_contention_timeout_in_ms: 1000 -# How long the coordinator should wait for truncates to complete -# (This can be much longer, because unless auto_snapshot is disabled -# we need to flush first so we can snapshot before removing the data.) -truncate_request_timeout_in_ms: 60000 -# The default timeout for other, miscellaneous operations -request_timeout_in_ms: 10000 - -# Enable operation timeout information exchange between nodes to accurately -# measure request timeouts. If disabled, replicas will assume that requests -# were forwarded to them instantly by the coordinator, which means that -# under overload conditions we will waste that much extra time processing -# already-timed-out requests. -# -# Warning: before enabling this property make sure to ntp is installed -# and the times are synchronized between the nodes. -cross_node_timeout: false - -# Set socket timeout for streaming operation. -# The stream session is failed if no data/ack is received by any of the participants -# within that period, which means this should also be sufficient to stream a large -# sstable or rebuild table indexes. -# Default value is 86400000ms, which means stale streams timeout after 24 hours. -# A value of zero means stream sockets should never time out. -# streaming_socket_timeout_in_ms: 86400000 - -# phi value that must be reached for a host to be marked down. -# most users should never need to adjust this. -# phi_convict_threshold: 8 - -# endpoint_snitch -- Set this to a class that implements -# IEndpointSnitch. The snitch has two functions: -# - it teaches Cassandra enough about your network topology to route -# requests efficiently -# - it allows Cassandra to spread replicas around your cluster to avoid -# correlated failures. It does this by grouping machines into -# "datacenters" and "racks." Cassandra will do its best not to have -# more than one replica on the same "rack" (which may not actually -# be a physical location) -# -# CASSANDRA WILL NOT ALLOW YOU TO SWITCH TO AN INCOMPATIBLE SNITCH -# ONCE DATA IS INSERTED INTO THE CLUSTER. This would cause data loss. -# This means that if you start with the default SimpleSnitch, which -# locates every node on "rack1" in "datacenter1", your only options -# if you need to add another datacenter are GossipingPropertyFileSnitch -# (and the older PFS). From there, if you want to migrate to an -# incompatible snitch like Ec2Snitch you can do it by adding new nodes -# under Ec2Snitch (which will locate them in a new "datacenter") and -# decommissioning the old ones. -# -# Out of the box, Cassandra provides -# - SimpleSnitch: -# Treats Strategy order as proximity. This can improve cache -# locality when disabling read repair. Only appropriate for -# single-datacenter deployments. -# - GossipingPropertyFileSnitch -# This should be your go-to snitch for production use. The rack -# and datacenter for the local node are defined in -# cassandra-rackdc.properties and propagated to other nodes via -# gossip. If cassandra-topology.properties exists, it is used as a -# fallback, allowing migration from the PropertyFileSnitch. -# - PropertyFileSnitch: -# Proximity is determined by rack and data center, which are -# explicitly configured in cassandra-topology.properties. -# - Ec2Snitch: -# Appropriate for EC2 deployments in a single Region. Loads Region -# and Availability Zone information from the EC2 API. The Region is -# treated as the datacenter, and the Availability Zone as the rack. -# Only private IPs are used, so this will not work across multiple -# Regions. -# - Ec2MultiRegionSnitch: -# Uses public IPs as broadcast_address to allow cross-region -# connectivity. (Thus, you should set seed addresses to the public -# IP as well.) You will need to open the storage_port or -# ssl_storage_port on the public IP firewall. (For intra-Region -# traffic, Cassandra will switch to the private IP after -# establishing a connection.) -# - RackInferringSnitch: -# Proximity is determined by rack and data center, which are -# assumed to correspond to the 3rd and 2nd octet of each node's IP -# address, respectively. Unless this happens to match your -# deployment conventions, this is best used as an example of -# writing a custom Snitch class and is provided in that spirit. -# -# You can use a custom Snitch by setting this to the full class name -# of the snitch, which will be assumed to be on your classpath. -endpoint_snitch: SimpleSnitch - -# controls how often to perform the more expensive part of host score -# calculation -dynamic_snitch_update_interval_in_ms: 100 -# controls how often to reset all host scores, allowing a bad host to -# possibly recover -dynamic_snitch_reset_interval_in_ms: 600000 -# if set greater than zero and read_repair_chance is < 1.0, this will allow -# 'pinning' of replicas to hosts in order to increase cache capacity. -# The badness threshold will control how much worse the pinned host has to be -# before the dynamic snitch will prefer other replicas over it. This is -# expressed as a double which represents a percentage. Thus, a value of -# 0.2 means Cassandra would continue to prefer the static snitch values -# until the pinned host was 20% worse than the fastest. -dynamic_snitch_badness_threshold: 0.1 - -# request_scheduler -- Set this to a class that implements -# RequestScheduler, which will schedule incoming client requests -# according to the specific policy. This is useful for multi-tenancy -# with a single Cassandra cluster. -# NOTE: This is specifically for requests from the client and does -# not affect inter node communication. -# org.apache.cassandra.scheduler.NoScheduler - No scheduling takes place -# org.apache.cassandra.scheduler.RoundRobinScheduler - Round robin of -# client requests to a node with a separate queue for each -# request_scheduler_id. The scheduler is further customized by -# request_scheduler_options as described below. -request_scheduler: org.apache.cassandra.scheduler.NoScheduler - -# Scheduler Options vary based on the type of scheduler -# NoScheduler - Has no options -# RoundRobin -# - throttle_limit -- The throttle_limit is the number of in-flight -# requests per client. Requests beyond -# that limit are queued up until -# running requests can complete. -# The value of 80 here is twice the number of -# concurrent_reads + concurrent_writes. -# - default_weight -- default_weight is optional and allows for -# overriding the default which is 1. -# - weights -- Weights are optional and will default to 1 or the -# overridden default_weight. The weight translates into how -# many requests are handled during each turn of the -# RoundRobin, based on the scheduler id. -# -# request_scheduler_options: -# throttle_limit: 80 -# default_weight: 5 -# weights: -# Keyspace1: 1 -# Keyspace2: 5 - -# request_scheduler_id -- An identifier based on which to perform -# the request scheduling. Currently the only valid option is keyspace. -# request_scheduler_id: keyspace - -# Enable or disable inter-node encryption -# Default settings are TLS v1, RSA 1024-bit keys (it is imperative that -# users generate their own keys) TLS_RSA_WITH_AES_128_CBC_SHA as the cipher -# suite for authentication, key exchange and encryption of the actual data transfers. -# Use the DHE/ECDHE ciphers if running in FIPS 140 compliant mode. -# NOTE: No custom encryption options are enabled at the moment -# The available internode options are : all, none, dc, rack -# -# If set to dc cassandra will encrypt the traffic between the DCs -# If set to rack cassandra will encrypt the traffic between the racks -# -# The passwords used in these options must match the passwords used when generating -# the keystore and truststore. For instructions on generating these files, see: -# http://download.oracle.com/javase/6/docs/technotes/guides/security/jsse/JSSERefGuide.html#CreateKeystore -# -server_encryption_options: - internode_encryption: none - keystore: conf/.keystore - keystore_password: cassandra - truststore: conf/.truststore - truststore_password: cassandra - # More advanced defaults below: - # protocol: TLS - # algorithm: SunX509 - # store_type: JKS - # cipher_suites: [TLS_RSA_WITH_AES_128_CBC_SHA,TLS_RSA_WITH_AES_256_CBC_SHA,TLS_DHE_RSA_WITH_AES_128_CBC_SHA,TLS_DHE_RSA_WITH_AES_256_CBC_SHA,TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA,TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA] - # require_client_auth: false - -# enable or disable client/server encryption. -client_encryption_options: - enabled: false - # If enabled and optional is set to true encrypted and unencrypted connections are handled. - optional: false - keystore: conf/.keystore - keystore_password: cassandra - # require_client_auth: false - # Set trustore and truststore_password if require_client_auth is true - # truststore: conf/.truststore - # truststore_password: cassandra - # More advanced defaults below: - # protocol: TLS - # algorithm: SunX509 - # store_type: JKS - # cipher_suites: [TLS_RSA_WITH_AES_128_CBC_SHA,TLS_RSA_WITH_AES_256_CBC_SHA,TLS_DHE_RSA_WITH_AES_128_CBC_SHA,TLS_DHE_RSA_WITH_AES_256_CBC_SHA,TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA,TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA] - -# internode_compression controls whether traffic between nodes is -# compressed. -# can be: all - all traffic is compressed -# dc - traffic between different datacenters is compressed -# none - nothing is compressed. -internode_compression: all - -# Enable or disable tcp_nodelay for inter-dc communication. -# Disabling it will result in larger (but fewer) network packets being sent, -# reducing overhead from the TCP protocol itself, at the cost of increasing -# latency if you block for cross-datacenter responses. -inter_dc_tcp_nodelay: false - -# TTL for different trace types used during logging of the repair process. -tracetype_query_ttl: 86400 -tracetype_repair_ttl: 604800 - -# By default, Cassandra logs GC Pauses greater than 200 ms at INFO level -# This threshold can be adjusted to minimize logging if necessary -# gc_log_threshold_in_ms: 200 - -# GC Pauses greater than gc_warn_threshold_in_ms will be logged at WARN level -# If unset, all GC Pauses greater than gc_log_threshold_in_ms will log at -# INFO level -# Adjust the threshold based on your application throughput requirement -gc_warn_threshold_in_ms: 1000 - -# UDFs (user defined functions) are disabled by default. -# As of Cassandra 3.0 there is a sandbox in place that should prevent execution of evil code. -enable_user_defined_functions: false - -# Enables scripted UDFs (JavaScript UDFs). -# Java UDFs are always enabled, if enable_user_defined_functions is true. -# Enable this option to be able to use UDFs with "language javascript" or any custom JSR-223 provider. -# This option has no effect, if enable_user_defined_functions is false. -enable_scripted_user_defined_functions: false - -# The default Windows kernel timer and scheduling resolution is 15.6ms for power conservation. -# Lowering this value on Windows can provide much tighter latency and better throughput, however -# some virtualized environments may see a negative performance impact from changing this setting -# below their system default. The sysinternals 'clockres' tool can confirm your system's default -# setting. -windows_timer_interval: 1 - -# Maximum size of any value in SSTables. Safety measure to detect SSTable corruption -# early. Any value size larger than this threshold will result into marking an SSTable -# as corrupted. This should be positive and less than 2048. -# max_value_size_in_mb: 256 - -# Coalescing Strategies # -# Coalescing multiples messages turns out to significantly boost message processing throughput (think doubling or more). -# On bare metal, the floor for packet processing throughput is high enough that many applications won't notice, but in -# virtualized environments, the point at which an application can be bound by network packet processing can be -# surprisingly low compared to the throughput of task processing that is possible inside a VM. It's not that bare metal -# doesn't benefit from coalescing messages, it's that the number of packets a bare metal network interface can process -# is sufficient for many applications such that no load starvation is experienced even without coalescing. -# There are other benefits to coalescing network messages that are harder to isolate with a simple metric like messages -# per second. By coalescing multiple tasks together, a network thread can process multiple messages for the cost of one -# trip to read from a socket, and all the task submission work can be done at the same time reducing context switching -# and increasing cache friendliness of network message processing. -# See CASSANDRA-8692 for details. - -# Strategy to use for coalescing messages in OutboundTcpConnection. -# Can be fixed, movingaverage, timehorizon (default), disabled. -# You can also specify a subclass of CoalescingStrategies.CoalescingStrategy by name. -# otc_coalescing_strategy: TIMEHORIZON - -# How many microseconds to wait for coalescing. For fixed strategy this is the amount of time after the first -# message is received before it will be sent with any accompanying messages. For moving average this is the -# maximum amount of time that will be waited as well as the interval at which messages must arrive on average -# for coalescing to be enabled. -# otc_coalescing_window_us: 200 - -# Do not try to coalesce messages if we already got that many messages. This should be more than 2 and less than 128. -# otc_coalescing_enough_coalesced_messages: 8 - -# How many milliseconds to wait between two expiration runs on the backlog (queue) of the OutboundTcpConnection. -# Expiration is done if messages are piling up in the backlog. Droppable messages are expired to free the memory -# taken by expired messages. The interval should be between 0 and 1000, and in most installations the default value -# will be appropriate. A smaller value could potentially expire messages slightly sooner at the expense of more CPU -# time and queue contention while iterating the backlog of messages. -# An interval of 0 disables any wait time, which is the behavior of former Cassandra versions. -# -# otc_backlog_expiration_interval_ms: 200 -- cgit 1.2.3-korg