nameOverride: "" policies: - # policyName is the name of the policy policyName: "policy-xl710" # deviceType is the driver type for configured VFs. Allowed values are # "netdevice" and "vfio-pci". deviceType: "vfio-pci" # nicSelector selects the NICs to be configured. At least one of # vendor, deviceId, pfNames, or rootDevices must be deined. nicSelector: # deviceID is the device hex code of SR-IOV device. deviceID: "1583" # netFilter is the infrastructure networking selection # filter. Allowed values are # "openstack/NetworkID:xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx" #netFilter: "" # pfNames is a list of the SR-IOV PF names. #pfNames: [] # rootDevices is a list of the PCI addresses of SR-IOV PFs. #rootDevices: [] # vendor is the vendor hex code of SR-IOV device. Allowed values are # "8086", "15b3". vendor: "8086" # nodeSelector selects the nodes to be configured. nodeSelector: feature.node.kubernetes.io/network-sriov.capable: "true" feature.node.kubernetes.io/pci-0200_8086_1583.present: "true" # numVfs is the Number of VFs for each PF numVfs: 8 # resourceName is the SR-IOV Network device plugin endpoint. resourceName: "intel_sriov_nic" - policyName: "policy-82599es" deviceType: "vfio-pci" nicSelector: deviceID: "10fb" vendor: "8086" nodeSelector: feature.node.kubernetes.io/network-sriov.capable: "true" feature.node.kubernetes.io/pci-0200_8086_10fb.present: "true" numVfs: 8 resourceName: "intel_sriov_nic" - policyName: "policy-i350" deviceType: "vfio-pci" nicSelector: deviceID: "1521" vendor: "8086" nodeSelector: feature.node.kubernetes.io/network-sriov.capable: "true" feature.node.kubernetes.io/pci-0200_8086_1521.present: "true" numVfs: 2 resourceName: "intel_sriov_nic" networks: - # networkName is the name of both the SriovNetwork and the created # NetworkAttachmentDefinition custom resource. networkName: "sriov-intel" # networkNamespace of the NetworkAttachmentDefinition custom resource. networkNamespace: "default" # ipam configuration to be used for the network. ipam: | { "type": "host-local", "subnet": "10.56.206.0/24", "routes": [{ "dst": "0.0.0.0/0" }], "gateway": "10.56.206.1" } # # Optional values are listed below. # # deviceType is the driver type for configured VFs. Allowed values are # "netdevice" and "vfio-pci". #deviceType: "vfio-pci" # eSwitchMode NIC Device Mode. Allowed values are "legacy" and # "switchdev". #eSwitchMode: "switchdev" # isRdma defaults to false. #isRdma: true # linkType is the NIC link type. Allowed values are "eth", "ETH", # "ib", and "IB". #linkType: "eth" # mtu of VF #mtu: 9000 # priority of the policy, higher priority policies can override lower # ones. #priority: 99 # capabilities to be configured for this network. Capabilities # supported: (mac|ips), e.g. '{"mac": true}' #capabilities: | # { # "mac": true # } # linkState of VF (enable|disable|auto). #linkState: "enable" # maxTxRate, in Mbps, for the VF. Defaults to 0 (no rate limiting). #maxTxRate: 0 # metaPlugins configuration to be used in order to chain metaplugins # to the SR-IOV interface returned by the operator. #metaPlugins: | # { # "type": "tuning", # "sysctl": { # "net.core.somaxconn": "500" # } # } # minTxRate, in Mbps, for the VF. Defaults to 0 (no rate # limiting). min_tx_rate should be <= max_tx_rate. #minTxRate: 0 # spoofChk for VF, (on|off) #spoofChk: "off" # trust mode of VF (on|off) #trust: "off" # vlan ID to assign for the VF. Defaults to 0. #vlan: 0 # vlanQoS ID to assign for the VF. Defaults to 0. #vlanQoS: 0 # resourceName is the SR-IOV Network device plugin endpoint. resourceName: "intel_sriov_nic"