Clamp docker image from nexus3 and refactor

Take clamp docker image from nexus3.onap.org instead of default
+ refactor scripts

Change-Id: I87286c2ff4d56f508675a106692b80a69e8be02b
Signed-off-by: eh552t <eh552t@intl.att.com>
Issue-Id: CLAMP-33

7 files changed, 97 insertions, 63 deletions

diff --git a/test/csit/plans/clamp/TCA/setup.sh b/test/csit/plans/clamp/TCA/setup.sh
index 6398827bc..bb7a81447 100755
--- a/test/csit/plans/clamp/TCA/setup.sh
+++ b/test/csit/plans/clamp/TCA/setup.sh
@@ -17,37 +17,10 @@
 # Modifications copyright (c) 2017 AT&T Intellectual Property
 #
 # Place the scripts in run order:
-source ${WORKSPACE}/test/csit/scripts/clamp/script1.sh
 
-# Clone Clamp repo to get extra folder that has all needed to run docker with docker-compose to start DB and Clamp
-mkdir -p $WORKSPACE/archives/clamp-clone
-cd $WORKSPACE/archives/clamp-clone
-git clone --depth 1 http://gerrit.onap.org/r/clamp -b master
-cd clamp/extra/docker/clamp/
+source ${WORKSPACE}/test/csit/scripts/clamp/clone_clamp_and_change_dockercompose.sh
 
-# start Clamp and MariaDB containers with docker compose and configuration from clamp/extra/docker/clamp/docker-compose.yml
-docker-compose up -d
-
-# WAIT 5 minutes maximum and test every 5 seconds if Clamp up using HealthCheck API
-TIME_OUT=300
-INTERVAL=5
-TIME=0
-while [ "$TIME" -lt "$TIME_OUT" ]; do
-  response=$(curl --write-out '%{http_code}' --silent --output /dev/null http://localhost:8080/restservices/clds/v1/clds/healthcheck); echo $response
-
-  if [ "$response" == "200" ]; then
-    echo Clamp and its database well started in $TIME seconds
-    break;
-  fi
-
-  echo Sleep: $INTERVAL seconds before testing if Clamp is up. Total wait time up now is: $TIME seconds. Timeout is: $TIME_OUT seconds
-  sleep $INTERVAL
-  TIME=$(($TIME+$INTERVAL))
-done
-
-if [ "$TIME" -ge "$TIME_OUT" ]; then
-   echo TIME OUT: Docker containers not started in $TIME_OUT seconds... Could cause problems for tests...
-fi
+source ${WORKSPACE}/test/csit/scripts/clamp/start_clamp_containers.sh
 
 # Pass any variables required by Robot test suites in ROBOT_VARIABLES
 #ROBOT_VARIABLES="-v TEST:${TEST}"
diff --git a/test/csit/plans/clamp/TCA/teardown.sh b/test/csit/plans/clamp/TCA/teardown.sh
index 1d1e2186e..07067e60e 100755
--- a/test/csit/plans/clamp/TCA/teardown.sh
+++ b/test/csit/plans/clamp/TCA/teardown.sh
@@ -17,7 +17,6 @@
 # Modifications copyright (c) 2017 AT&T Intellectual Property
 #
 
-kill-instance.sh clamp_clamp_1
-kill-instance.sh clamp_db_1
+source ${WORKSPACE}/test/csit/scripts/clamp/kill_and_remove_clamp_and_db_containers.sh
 
 # $WORKSPACE/archives/clamp-clone deleted with archives folder when tests starts so we keep it at the end for debugging
diff --git a/test/csit/plans/clamp/UIs/setup.sh b/test/csit/plans/clamp/UIs/setup.sh
index 6398827bc..bb7a81447 100755
--- a/test/csit/plans/clamp/UIs/setup.sh
+++ b/test/csit/plans/clamp/UIs/setup.sh
@@ -17,37 +17,10 @@
 # Modifications copyright (c) 2017 AT&T Intellectual Property
 #
 # Place the scripts in run order:
-source ${WORKSPACE}/test/csit/scripts/clamp/script1.sh
 
-# Clone Clamp repo to get extra folder that has all needed to run docker with docker-compose to start DB and Clamp
-mkdir -p $WORKSPACE/archives/clamp-clone
-cd $WORKSPACE/archives/clamp-clone
-git clone --depth 1 http://gerrit.onap.org/r/clamp -b master
-cd clamp/extra/docker/clamp/
+source ${WORKSPACE}/test/csit/scripts/clamp/clone_clamp_and_change_dockercompose.sh
 
-# start Clamp and MariaDB containers with docker compose and configuration from clamp/extra/docker/clamp/docker-compose.yml
-docker-compose up -d
-
-# WAIT 5 minutes maximum and test every 5 seconds if Clamp up using HealthCheck API
-TIME_OUT=300
-INTERVAL=5
-TIME=0
-while [ "$TIME" -lt "$TIME_OUT" ]; do
-  response=$(curl --write-out '%{http_code}' --silent --output /dev/null http://localhost:8080/restservices/clds/v1/clds/healthcheck); echo $response
-
-  if [ "$response" == "200" ]; then
-    echo Clamp and its database well started in $TIME seconds
-    break;
-  fi
-
-  echo Sleep: $INTERVAL seconds before testing if Clamp is up. Total wait time up now is: $TIME seconds. Timeout is: $TIME_OUT seconds
-  sleep $INTERVAL
-  TIME=$(($TIME+$INTERVAL))
-done
-
-if [ "$TIME" -ge "$TIME_OUT" ]; then
-   echo TIME OUT: Docker containers not started in $TIME_OUT seconds... Could cause problems for tests...
-fi
+source ${WORKSPACE}/test/csit/scripts/clamp/start_clamp_containers.sh
 
 # Pass any variables required by Robot test suites in ROBOT_VARIABLES
 #ROBOT_VARIABLES="-v TEST:${TEST}"
diff --git a/test/csit/plans/clamp/UIs/teardown.sh b/test/csit/plans/clamp/UIs/teardown.sh
index 1d1e2186e..07067e60e 100755
--- a/test/csit/plans/clamp/UIs/teardown.sh
+++ b/test/csit/plans/clamp/UIs/teardown.sh
@@ -17,7 +17,6 @@
 # Modifications copyright (c) 2017 AT&T Intellectual Property
 #
 
-kill-instance.sh clamp_clamp_1
-kill-instance.sh clamp_db_1
+source ${WORKSPACE}/test/csit/scripts/clamp/kill_and_remove_clamp_and_db_containers.sh
 
 # $WORKSPACE/archives/clamp-clone deleted with archives folder when tests starts so we keep it at the end for debugging
diff --git a/test/csit/scripts/clamp/clone_clamp_and_change_dockercompose.sh b/test/csit/scripts/clamp/clone_clamp_and_change_dockercompose.sh
new file mode 100755
index 000000000..f3b080ea1
--- /dev/null
+++ b/test/csit/scripts/clamp/clone_clamp_and_change_dockercompose.sh
@@ -0,0 +1,35 @@
+#!/bin/bash
+#
+# ============LICENSE_START=======================================================
+# ONAP CLAMP
+# ================================================================================
+# Copyright (C) 2017 AT&T Intellectual Property. All rights
+#                             reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END============================================
+# ===================================================================
+# ECOMP is a trademark and service mark of AT&T Intellectual Property.
+#
+
+echo "This is ${WORKSPACE}/test/csit/scripts/clamp/clone_clamp_and_change_dockercompose.sh"
+
+# Clone Clamp repo to get extra folder that has all needed to run docker with docker-compose to start DB and Clamp
+mkdir -p $WORKSPACE/archives/clamp-clone
+cd $WORKSPACE/archives/clamp-clone
+git clone --depth 1 http://gerrit.onap.org/r/clamp -b master
+cd clamp/extra/docker/clamp/
+
+# Pull the Clamp docker image from nexus instead of local image by default in the docker-compose.yml
+sed -i '/image: onap\/clamp/c\    image: nexus3.onap.org:10001\/onap\/clamp' docker-compose.yml
+
diff --git a/test/csit/scripts/clamp/script1.sh b/test/csit/scripts/clamp/kill_and_remove_clamp_and_db_containers.sh
index 213a316c1..c51464300 100755
--- a/test/csit/scripts/clamp/script1.sh
+++ b/test/csit/scripts/clamp/kill_and_remove_clamp_and_db_containers.sh
@@ -17,4 +17,9 @@
 # Modifications copyright (c) 2017 AT&T Intellectual Property
 #
 
-echo "This is ${WORKSPACE}/test/csit/scripts/clamp/script1.sh"
+echo "This is ${WORKSPACE}/test/csit/scripts/clamp/kill_and_remove_clamp_and_db_containers.sh"
+
+kill-instance.sh clamp_clamp_1
+kill-instance.sh clamp_db_1
+
+# $WORKSPACE/archives/clamp-clone deleted with archives folder when tests starts so we keep it at the end for debugging
diff --git a/test/csit/scripts/clamp/start_clamp_containers.sh b/test/csit/scripts/clamp/start_clamp_containers.sh
new file mode 100755
index 000000000..143012f30
--- /dev/null
+++ b/test/csit/scripts/clamp/start_clamp_containers.sh
@@ -0,0 +1,50 @@
+#!/bin/bash
+#
+# ============LICENSE_START=======================================================
+# ONAP CLAMP
+# ================================================================================
+# Copyright (C) 2017 AT&T Intellectual Property. All rights
+#                             reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END============================================
+# ===================================================================
+# ECOMP is a trademark and service mark of AT&T Intellectual Property.
+#
+
+echo "This is ${WORKSPACE}/test/csit/scripts/clamp/start_clamp_containers.sh"
+
+# start Clamp and MariaDB containers with docker compose and configuration from clamp/extra/docker/clamp/docker-compose.yml
+docker-compose up -d
+
+# WAIT 5 minutes maximum and test every 5 seconds if Clamp up using HealthCheck API
+TIME_OUT=300
+INTERVAL=5
+TIME=0
+while [ "$TIME" -lt "$TIME_OUT" ]; do
+  response=$(curl --write-out '%{http_code}' --silent --output /dev/null http://localhost:8080/restservices/clds/v1/clds/healthcheck); echo $response
+
+  if [ "$response" == "200" ]; then
+    echo Clamp and its database well started in $TIME seconds
+    break;
+  fi
+
+  echo Sleep: $INTERVAL seconds before testing if Clamp is up. Total wait time up now is: $TIME seconds. Timeout is: $TIME_OUT seconds
+  sleep $INTERVAL
+  TIME=$(($TIME+$INTERVAL))
+done
+
+if [ "$TIME" -ge "$TIME_OUT" ]; then
+   echo TIME OUT: Docker containers not started in $TIME_OUT seconds... Could cause problems for tests...
+fi
+