.. This work is licensed under a Creative Commons Attribution 4.0 International License. http://creativecommons.org/licenses/by/4.0 Copyright 2017 ONAP .. contents:: :depth: 2 .. .. index:: Setting Up Full ONAP ======================== **Setting Up Full ONAP** ======================== .. _demo-installing-running-onap: **Context** =========== ONAP may be deployed in different contexts depending on your requirements. The recommended installation for Amsterdam Release is currently based on OpenStack. Using the Amsterdam Release installer, ONAP components may be deployed in a single tenant or multiple tenants. One tenant for all the components except DCAE, and another tenant dedicated to the DCAE components. The VNFs managed by ONAP may be deployed in different OpenStack tenants or based on top of VMware based infrastructure (cf MultiCloud project). The current installation is based on the single tenant deployment (all the ONAP components will be hosted in a unique tenant) with DCAE componntes deployed in High Availability mode. **Requirements** ================ OpenStack --------- ONAP installation is validated on `OpenStack Ocata `_ or latter release. You can use various Cloud providers offering OpenStack based solutions. A list of available Cloud providers on the `OpenStack marketplace `_. You can use your private Cloud infrastructure. The following OpenStack components must be deployed in the infrastructure: - *Cinder* - *Designate* - *Glance* - *Heat* - *Horizon* - *Keystone* - *Neutron* - *Nova* To deploy OpenStack, you can use various solutions: - `OpenStack installer `_ - `OPNFV Cross Community Continuous Integration - XCI installer `_ *Designate* component is usually not deployed using standard OpenStack installers. Please find a guide to deploy and configure *Designate* .. toctree:: :maxdepth: 1 install-designate.rst The OpenStack infrastructure must enable internet access. ONAP components --------------- The following table presents the mapping between the created VM and the ONAP components, and provides informtaion about he VM (flavor and image): =================== ================= ======= ============ VM name ONAP project(s) Flavor Image =================== ================= ======= ============ onap-aai-inst1 AAI xlarge Ubuntu 14.04 onap-aai-inst2 AAI/UI xlarge Ubuntu 14.04 onap-appc APPC, CCSDK large Ubuntu 14.04 onap-clamp CLAMP medium Ubuntu 16.04 onap-dns-server *Internal DNS* small Ubuntu 14.04 onap-message-router DMAAP large Ubuntu 14.04 onap-multi-service MSB, VF-C, VNFSDK xxlarge Ubuntu 16.04 onap-policy Policy xlarge Ubuntu 14.04 onap-portal Portal, CLI large Ubuntu 14.04 onap-robot Integration medium Ubuntu 16.04 onap-sdc SDC xlarge Ubuntu 16.04 onap-sdnc SDNC, CCSDK large Ubuntu 14.04 onap-so SO large Ubuntu 16.04 onap-vid VID medium Ubuntu 14.04 onap-dcae-bootstrap DCAE, Holmes small Ubuntu 14.04 dcaeorcl00 DCAE/Orchestr. medium CentOS 7 dcaecnsl00 DCAE/Consul medium Ubuntu 16.04 dcaecnsl01 DCAE/Consul medium Ubuntu 16.04 dcaecnsl02 DCAE/Consul medium Ubuntu 16.04 dcaedokp00 DCAE/Policy Hand. medium Ubuntu 16.04 dcaedoks00 DCAE/VES, Holmes medium Ubuntu 16.04 dcaepgvm00 DCAE/Postrges medium Ubuntu 16.04 dcaecdap00 DCAE/CDAP large Ubuntu 16.04 dcaecdap01 DCAE/CDAP large Ubuntu 16.04 dcaecdap02 DCAE/CDAP large Ubuntu 16.04 dcaecdap03 DCAE/CDAP large Ubuntu 16.04 dcaecdap04 DCAE/CDAP large Ubuntu 16.04 dcaecdap05 DCAE/CDAP large Ubuntu 16.04 dcaecdap06 DCAE/CDAP large Ubuntu 16.04 =================== ================= ======= ============ Footprint --------- The ONAP installation requires the following footprint: - 29 VM - 148 vCPU - 336 GB RAM - 3 TB Storage - 29 floating IP .. Note: the default flavor size may be optimized. The ONAP community is working to provide adpted flavors for basic ONAP installation. .. Note: you should also reserve some resourcse for the VNFs to be deployed. Artifacts --------- The following artifacts must be deployed on the OpenStack infrastructure. - a public SSH key to access the various VM - private SSH key and public key SSH key for the DCAE VM - Ubuntu 14.04 image - Ubuntu 16.04 image - CentOS 7 image - Set of flavors: small, medium, large, medium, large, xlarge, xxlarge .. Note that floating IP may be private IP. .. Note Basic flavors can reuse the default flavors as defined by `OpenStack `_ The xxlarge flavor should be confiured using the following values: 12 vCPU, 64 GB RAM and 120 GB storage. Security -------- The default installation assumes that the Default security group is configured to enable full access between the ONAP components. Depending on your environment, we may need to open some security groups (eg when using the portal from your desktop). The list of various services and ports used can be found on the `ONAP wiki `_ **Deployment** ============== Source files ------------ - Template file: https://git.onap.org/demo/plain/heat/ONAP/onap_openstack.yaml - Environment file: https://git.onap.org/demo/plain/heat/ONAP/onap_openstack.env Description ----------- The ONAP HEAT template spins up the entire ONAP platform. The template, onap_openstack.yaml, comes with an environment file, onap_openstack.env, in which all the default values are defined. The HEAT template is composed of two sections: (i) parameters, and (ii) resources. The parameter section contains the declaration and description of the parameters that will be used to spin up ONAP, such as public network identifier, URLs of code and artifacts repositories, etc. The default values of these parameters can be found in the environment file. The resource section contains the definition of: - ONAP Private Management Network, which ONAP components use to communicate with each other and with VNFs - ONAP Virtual Machines (VMs) - Public/private key pair used to access ONAP VMs - Virtual interfaces towards the ONAP Private Management Network - Disk volumes. Each VM specification includes Operating System image name, VM size (i.e. flavor), VM name, etc. Each VM has two virtual network interfaces: one towards the public network and one towards the ONAP Private Management network, as described above. Furthermore, each VM runs a post-instantiation script that downloads and installs software dependencies (e.g. Java JDK, gcc, make, Python, ...) and ONAP software packages and docker containers from remote repositories. When the HEAT template is executed, the Openstack HEAT engine creates the resources defined in the HEAT template, based on the parameters values defined in the environment file. Environment file ---------------- Before running HEAT, it is necessary to customize the environment file. Indeed, some parameters, namely public_net_id, pub_key, openstack_tenant_id, openstack_username, and openstack_api_key, need to be set depending on the user's environment: **Global parameters** :: public_net_id: PUT YOUR NETWORK ID/NAME HERE pub_key: PUT YOUR PUBLIC KEY HERE openstack_tenant_id: PUT YOUR OPENSTACK PROJECT ID HERE openstack_username: PUT YOUR OPENSTACK USERNAME HERE openstack_api_key: PUT YOUR OPENSTACK PASSWORD HERE horizon_url: PUT THE HORIZON URL HERE keystone_url: PUT THE KEYSTONE URL HERE (do not include version number) openstack_region parameter is set to RegionOne (OpenStack default). If your OpenStack is using another Region, please modify this parameter. public_net_id is the unique identifier (UUID) or name of the public network of the cloud provider. To get the public_net_id, use the following OpenStack CLI command (ext is the name of the external network, change it with the name of the external network of your installation) :: openstack network list | grep ext | awk '{print $2}' pub_key is string value of the public key that will be installed in each ONAP VM. To create a public/private key pair in Linux, please execute the following instruction: :: user@ubuntu:~$ ssh-keygen -t rsa The following operations to create the public/private key pair occur: :: Generating public/private rsa key pair. Enter file in which to save the key (/home/user/.ssh/id_rsa): Created directory '/home/user/.ssh'. Enter passphrase (empty for no passphrase): Enter same passphrase again: Your identification has been saved in /home/user/.ssh/id_rsa. Your public key has been saved in /home/user/.ssh/id_rsa.pub. openstack_username, openstack_tenant_id (password), and openstack_api_key are user's credentials to access the OpenStack-based cloud. **Images and flavors parameters** :: ubuntu_1404_image: PUT THE UBUNTU 14.04 IMAGE NAME HERE ubuntu_1604_image: PUT THE UBUNTU 16.04 IMAGE NAME HERE flavor_small: PUT THE SMALL FLAVOR NAME HERE flavor_medium: PUT THE MEDIUM FLAVOR NAME HERE flavor_large: PUT THE LARGE FLAVOR NAME HERE flavor_xlarge: PUT THE XLARGE FLAVOR NAME HERE flavor_xxlarge: PUT THE XXLARGE FLAVOR NAME HERE To get the images in your OpenStack environment, use the following OpenStack CLI command: :: openstack image list | grep 'ubuntu' To get the flavor names used in your OpenStack environment, use the following OpenStack CLI command: :: openstack flavor list **Network parameters** :: dns_list: PUT THE ADDRESS OFTHE EXTERNAL DNS HERE (e.g. a comma-separated list of IP addresses in your /etc/resolv.conf in UNIX-based Operating Systems). THIS LIST MUST INCLUDE THE DNS SERVER THAT OFFERS DNS AS AS SERVICE (see DCAE section below for more details) external_dns: PUT THE FIRST ADDRESS OF THE EXTERNAL DNS LIST HERE oam_network_cidr: 10.0.0.0/16 dns_forwarder: PUT THE IP OF DNS FORWARDER FOR ONAP DEPLOYMENT'S OWN DNS SERVER oam_network_cidr: 10.0.0.0/16 You can use the Google Public DNS 8.8.8.8 and 4.4.4.4 address or your internal DNS servers ONAP installs a DNS server used to resolve IP addresses in the ONAP OAM private network. ONAP Amsterdam Release also requires OpenStack Designate DNS support for the DCAE platform, so as to allow IP address discovery and communication among DCAE elements. This is required because the ONAP HEAT template only installs the DCAE bootstrap container, which will in turn install the entire DCAE platform. As such, at installation time, the IP addresses of the DCAE components are unknown. The DNS server that ONAP installs needs to be connected to the Designate DNS to allow communication between the DCAE elements and the other ONAP components. To this end, dns\_list, external\_dns, and dns\_forwarder should all have the IP address of the Designate DNS. These three parameters are redundant, but still required for Amsterdam Release. Originally, dns\_list and external\_dns were both used to circumvent some limitations of older OpenStack versions. In future releases, the DNS settings and parameters in HEAT will be consolidated. The Designate DNS is configured to access the external DNS. As such, the ONAP DNS will forward to the Designate DNS the queries from ONAP components to the external world. The Designate DNS will then forward those queries to the external DNS. **DCAE Parameters** DCAE spins up ONAP's data collection and analytics system in two phases. The first is the launching of a bootstrap VM that is specified in the ONAP Heat template, as described above. This VM requires a number of deployment-specific configuration parameters being provided so that it can subsequently bring up the DCAE system. There are two groups of parameters. The first group relates to the launching of DCAE VMs, including parameters such as the keystone URL and additional VM image IDs/names. Hence these parameters need to be provided to DCAE. Note that although DCAE VMs will be launched in the same tenant as the rest of ONAP, because DCAE may use MultiCloud node as the agent for interfacing with the underlying cloud, it needs a separate keystone URL (which points to MultiCloud node instead of the underlying cloud). The second group of configuration parameters relate to DNS As A Service support (DNSaaS). DCAE requires DNSaaS for registering its VMs into organization-wide DNS service. For OpenStack, DNSaaS is provided by Designate, as mentioned above. Designate support can be provided via an integrated service endpoint listed under the service catalog of the OpenStack installation; or proxyed by the ONAP MultiCloud service. For the latter case, a number of parameters are needed to configure MultiCloud to use the correct Designate service. These parameters are described below: :: dcae_keystone_url: PUT THE MULTIVIM PROVIDED KEYSTONE API URL HERE dcae_centos_7_image: PUT THE CENTOS7 VM IMAGE NAME HERE FOR DCAE LAUNCHED CENTOS7 VM dcae_domain: PUT THE NAME OF DOMAIN THAT DCAE VMS REGISTER UNDER dcae_public_key: PUT THE PUBLIC KEY OF A KEYPAIR HERE TO BE USED BETWEEN DCAE LAUNCHED VMS dcae_private_key: PUT THE SECRET KEY OF A KEYPAIR HERE TO BE USED BETWEEN DCAE LAUNCHED VMS dnsaas_config_enabled: PUT WHETHER TO USE PROXYED DESIGNATE dnsaas_region: PUT THE DESIGNATE PROVIDING OPENSTACK'S REGION HERE dnsaas_keystone_url: PUT THE DESIGNATE PROVIDING OPENSTACK'S KEYSTONE URL HERE dnsaas_tenant_name: PUT THE TENANT NAME IN THE DESIGNATE PROVIDING OPENSTACK HERE (FOR R1 USE THE SAME AS openstack_tenant_name) dnsaas_username: PUT THE DESIGNATE PROVIDING OPENSTACK'S USERNAME HERE dnsaas_password: PUT THE DESIGNATE PROVIDING OPENSTACK'S PASSWORD HERE Instantiation ------------- The ONAP platform can be instantiated via Horizon (OpenStack dashboard) or Command Line. **Instantiation via Horizon:** - Login to Horizon URL with your personal credentials - Click "Stacks" from the "Orchestration" menu - Click "Launch Stack" - Paste or manually upload the HEAT template file (onap_openstack.yaml) in the "Template Source" form - Paste or manually upload the HEAT environment file (onap_openstack.env) in the "Environment Source" form - Click "Next" - Specify a name in the "Stack Name" form - Provide the password in the "Password" form - Click "Launch" **Instantiation via Command Line:** - Install the HEAT client on your machine, e.g. in Ubuntu (ref. http://docs.openstack.org/user-guide/common/cli-install-openstack-command-line-clients.html): :: apt-get install python-dev python-pip pip install python-heatclient # Install heat client pip install python-openstackclient # Install the Openstack client to support multiple services - Create a file (named i.e. ~/openstack/openrc) that sets all the environmental variables required to access Rackspace: :: export OS_AUTH_URL=INSERT THE AUTH URL HERE export OS_USERNAME=INSERT YOUR USERNAME HERE export OS_TENANT_ID=INSERT YOUR TENANT ID HERE export OS_REGION_NAME=INSERT THE REGION HERE export OS_PASSWORD=INSERT YOUR PASSWORD HERE - Run the script from command line: :: source ~/openstack/openrc - In order to install the ONAP platform, type: :: heat stack-create STACK_NAME -f PATH_TO_HEAT_TEMPLATE(YAML FILE) -e PATH_TO_ENV_FILE # Old HEAT client, OR openstack stack create -t PATH_TO_HEAT_TEMPLATE(YAML FILE) -e PATH_TO_ENV_FILE STACK_NAME # New Openstack client .. Note The Heat template deployment may take time (up to one hour) depending on your hardware environment. Test the installation --------------------- Every ONAP component offers a HealthCheck REST API. The *Robot Virtual Machine* can be used to test that every components run smoothly. Run the following command to perform the HealthCheck: .. code-block:: bash docker exec -it openecompete_container /var/opt/OpenECOMP_ETE/runTags.sh -i health h -d ./html -V /share/config/integration_robot_properties.py -V /share/config/integration_preload_parameters.py -V /share/config/vm_properties.py This testsuite will execute 30 tests towards the various ONAP components. Detect problems --------------- If all the tests are not OK, many causes are possible. Here is a simple procedure to detect where the problem occurs: * Check the OpenStack Virtual Machine logs * Connect to the Virtual Machine and check that the various containers are running. The list of containers are described in the following section. In case some containers are missing, check the docker logs using the following command: .. code-block:: bash sudo docker ps -a sudo docker logs **Portal configuration** ======================== The current ONAP installation is using the *onap.org* domain. To use the portal on your desktop, you must configure the following information in your *host* file (located in /etc/host for Linux or /windows/system32/drivers/etc/hosts for Windows): .. code-block:: bash policy.api.simpledemo.onap.org portal.api.simpledemo.onap.org sdc.api.simpledemo.onap.org vid.api.simpledemo.onap.org aai.api.simpledemo.onap.org aai.ui.simpledemo.onap.org You can use the Horizon dashboard to get the IP adresses associated with the Virtual Machines or use the following command line: .. code-block:: bash openstack server list Launch the portal on the http://portal.api.simpledemo.onap.org:8989/ONAPPORTAL/login.htm Various users are predefined as presented in the following table: .. csv-table:: :header: Role, Login :widths: 20, 20 Superuser,demo Designer,cs0008 Tester,jm0007 Governor,gv0001 Ops,op0001 The password is *demo123456!* Go to the `Portal component user guide `_ Other UI documentation: - `CLAMP `_ - `SDC `_ - `UI Use-Case `_ **Components** ============== The list of various services and ports used can be found on the `ONAP wiki `_ .. This work is licensed under a Creative Commons Attribution 4.0 International License. http://creativecommons.org/licenses/by/4.0 Copyright 2017 ONAP .. contents::