From 59f06d741a348797047fc38d0584d8f161243955 Mon Sep 17 00:00:00 2001 From: Srivahni Date: Thu, 26 Oct 2017 19:44:45 -0700 Subject: Modified vGW .env, .yaml and install scripts Configured vGW .env file Configured vGW .yaml file to not run the install script Modified vGW install script and included different build modes Change-Id: I178cc1909ffa13fc5164e142de1de78b1366c624 Issue-ID: INT-63 Signed-off-by: Srivahni --- vnfs/vCPE/scripts/v_gw_install.sh | 190 +++++++++++++++++++++++--------------- 1 file changed, 114 insertions(+), 76 deletions(-) (limited to 'vnfs') diff --git a/vnfs/vCPE/scripts/v_gw_install.sh b/vnfs/vCPE/scripts/v_gw_install.sh index 3a12d7ed..6074cdfa 100644 --- a/vnfs/vCPE/scripts/v_gw_install.sh +++ b/vnfs/vCPE/scripts/v_gw_install.sh @@ -9,6 +9,18 @@ VPP_SOURCE_REPO_BRANCH=$(cat /opt/config/vpp_source_repo_branch.txt) HC2VPP_SOURCE_REPO_URL=$(cat /opt/config/hc2vpp_source_repo_url.txt) HC2VPP_SOURCE_REPO_BRANCH=$(cat /opt/config/hc2vpp_source_repo_branch.txt) CLOUD_ENV=$(cat /opt/config/cloud_env.txt) +MUX_GW_IP=$(cat /opt/config/mux_gw_private_net_ipaddr.txt) +MUX_GW_CIDR=$(cat /opt/config/mux_gw_private_net_cidr.txt) + +# Build states are: +# 'build' - just build the code +# 'done' - code is build, install and setup +# 'auto' - bulid, install and setup +BUILD_STATE="auto" +if [[ -f /opt/config/compile_state.txt ]] +then + BUILD_STATE=$(cat /opt/config/compile_state.txt) +fi # Convert Network CIDR to Netmask cdr2mask () { @@ -19,8 +31,10 @@ cdr2mask () { } # OpenStack network configuration -if [[ $CLOUD_ENV == "openstack" ]] +if [[ $BUILD_STATE != "build" ]] then + if [[ $CLOUD_ENV == "openstack" ]] + then echo 127.0.0.1 $(hostname) >> /etc/hosts # Allow remote login as root @@ -29,15 +43,6 @@ then MTU=$(/sbin/ifconfig | grep MTU | sed 's/.*MTU://' | sed 's/ .*//' | sort -n | head -1) - IP=$(cat /opt/config/mux_gw_private_net_ipaddr.txt) - BITS=$(cat /opt/config/mux_gw_private_net_cidr.txt | cut -d"/" -f2) - NETMASK=$(cdr2mask $BITS) - echo "auto eth1" >> /etc/network/interfaces - echo "iface eth1 inet static" >> /etc/network/interfaces - echo " address $IP" >> /etc/network/interfaces - echo " netmask $NETMASK" >> /etc/network/interfaces - echo " mtu $MTU" >> /etc/network/interfaces - IP=$(cat /opt/config/oam_ipaddr.txt) BITS=$(cat /opt/config/oam_cidr.txt | cut -d"/" -f2) NETMASK=$(cdr2mask $BITS) @@ -47,43 +52,42 @@ then echo " netmask $NETMASK" >> /etc/network/interfaces echo " mtu $MTU" >> /etc/network/interfaces - ifup eth1 ifup eth2 -fi + fi +fi # endif BUILD_STATE != "build" -# Download required dependencies -echo "deb http://ppa.launchpad.net/openjdk-r/ppa/ubuntu $(lsb_release -c -s) main" >> /etc/apt/sources.list.d/java.list -echo "deb-src http://ppa.launchpad.net/openjdk-r/ppa/ubuntu $(lsb_release -c -s) main" >> /etc/apt/sources.list.d/java.list -apt-get update -apt-get install --allow-unauthenticated -y wget openjdk-8-jdk apt-transport-https ca-certificates g++ libcurl4-gnutls-dev -sleep 1 +if [[ $BUILD_STATE != "done" ]] +then + # Download required dependencies + echo "deb http://ppa.launchpad.net/openjdk-r/ppa/ubuntu $(lsb_release -c -s) main" >> /etc/apt/sources.list.d/java.list + echo "deb-src http://ppa.launchpad.net/openjdk-r/ppa/ubuntu $(lsb_release -c -s) main" >> /etc/apt/sources.list.d/java.list + apt-get --allow-unauthenticated update + apt-get install --allow-unauthenticated -y wget openjdk-8-jdk apt-transport-https ca-certificates g++ libcurl4-gnutls-dev + sleep 1 -# Install the tools required for download codes -apt-get install -y expect git + # Install the tools required for download codes + apt-get --allow-unauthenticated install -y expect git make linux-image-extra-`uname -r` -#Download and build the VPP codes -cd /opt -git clone ${VPP_SOURCE_REPO_URL} -b ${VPP_SOURCE_REPO_BRANCH} vpp + #Download and build the VPP codes + cd /opt + git clone ${VPP_SOURCE_REPO_URL} -b ${VPP_SOURCE_REPO_BRANCH} vpp -cd vpp -expect -c " - set timeout 60; - spawn make install-dep; - expect { - \"Do you want to continue?*\" {send \"Y\r\"; interact} - } -" + cd vpp + make install-dep -cd build-root -./bootstrap.sh -make V=0 PLATFORM=vpp TAG=vpp install-deb + cd build-root + ./bootstrap.sh + make V=0 PLATFORM=vpp TAG=vpp install-deb -# Install the VPP package -dpkg -i *.deb -systemctl stop vpp + # Install the VPP package + dpkg -i *.deb + systemctl stop vpp +fi # endif BUILD_STATE != "done" -# Auto-start configuration for the VPP -cat > /etc/vpp/startup.conf << EOF +if [[ $BUILD_STATE != "build" ]] +then + # Auto-start configuration for the VPP + cat > /etc/vpp/startup.conf << EOF unix { nodaemon @@ -188,12 +192,28 @@ cpu { EOF +# Get list of network device PCI bus addresses + get_nic_pci_list() { + while read -r line ; do + if [ "$line" != "${line#*network device}" ]; then + echo -n "${line%% *} " + fi + done < <(lspci) + } + + NICS=$(get_nic_pci_list) + NICS=`echo ${NICS} | sed 's/[0]\+\([0-9]\)/\1/g' | sed 's/[.:]/\//g'` + + MUX_GW_NIC=GigabitEthernet`echo ${NICS} | cut -d " " -f 2` # second interface in list + GW_PUB_NIC=GigabitEthernet`echo ${NICS} | cut -d " " -f 4` # fourth interface in list + +touch /etc/vpp/setup.gate cat > /etc/vpp/setup.gate << EOF -set int state GigabitEthernet0/8/0 up -set int ip address GigabitEthernet0/8/0 10.5.0.21/24 +set int state ${MUX_GW_NIC} up +set int ip address ${MUX_GW_NIC} 10.5.0.21/24 -set int state GigabitEthernet0/9/0 up -set dhcp client intfc GigabitEthernet0/9/0 hostname vg-1 +set int state ${GW_PUB_NIC} up +set dhcp client intfc ${GW_PUB_NIC} hostname vg-1 tap connect lstack address 192.168.1.1/24 set int state tap-0 up @@ -204,16 +224,28 @@ set interface l2 bridge tap-0 10 0 set interface l2 bridge vxlan_tunnel0 10 1 set bridge-domain arp term 10 -set int ip address vxlan_tunnel0 192.168.1.254/24 -set interface snat in vxlan_tunnel0 out GigabitEthernet0/9/0 +loopback create +set int l2 bridge loop0 10 bvi 2 +set int ip address loop0 192.168.1.254/24 +set int state loop0 up +set int snat in loop0 out ${GW_PUB_NIC} +snat add int address ${GW_PUB_NIC} + EOF -# Download and install HC2VPP from source -cd /opt -git clone ${HC2VPP_SOURCE_REPO_URL} -b ${HC2VPP_SOURCE_REPO_BRANCH} hc2vpp +fi # endif BUILD_STATE != "build" + +if [[ $BUILD_STATE != "done" ]] +then + + # Download and install HC2VPP from source + cd /opt + git clone ${HC2VPP_SOURCE_REPO_URL} -b ${HC2VPP_SOURCE_REPO_BRANCH} hc2vpp -apt-get install -y maven -cat > ~/.m2/settings.xml << EOF + apt --allow-unauthenticated install -y python-ply-lex-3.5 python-ply-yacc-3.5 python-pycparser python-cffi + apt-get install -y maven + mkdir -p ~/.m2 + cat > ~/.m2/settings.xml << EOF ~/.m2/settings.xml << EOF EOF -cd hc2vpp -mvn clean install -l_version=$(cat pom.xml | grep "" | head -1) -l_version=$(echo "${l_version%<*}") -l_version=$(echo "${l_version#*>}") -mv vpp-integration/minimal-distribution/target/vpp-integration-distribution-${l_version}-hc/vpp-integration-distribution-${l_version} /opt/honeycomb -sed -i 's/127.0.0.1/0.0.0.0/g' /opt/honeycomb/config/honeycomb.json + cd hc2vpp + mvn clean install + l_version=$(cat pom.xml | grep "" | head -1) + l_version=$(echo "${l_version%<*}") + l_version=$(echo "${l_version#*>}") + mv vpp-integration/minimal-distribution/target/vpp-integration-distribution-${l_version}-hc/vpp-integration-distribution-${l_version} /opt/honeycomb + sed -i 's/127.0.0.1/0.0.0.0/g' /opt/honeycomb/config/honeycomb.json + +fi # endif BUILD_STATE != "done -# Create systemctl service for Honeycomb -cat > /etc/systemd/system/honeycomb.service << EOF +if [[ $BUILD_STATE != "build" ]] +then + # Create systemctl service for Honeycomb + cat > /etc/systemd/system/honeycomb.service << EOF [Unit] Description=Honeycomb Agent for the VPP control plane Documentation=https://wiki.fd.io/view/Honeycomb @@ -345,11 +381,11 @@ RestartSec=10 [Install] WantedBy=multi-user.target EOF -systemctl enable /etc/systemd/system/honeycomb.service + systemctl enable /etc/systemd/system/honeycomb.service -# Install the DHCP server and config -apt-get install -y isc-dhcp-server -cat >> /etc/dhcp/dhcpd.conf << EOF + # Install the DHCP server and config + apt-get install -y isc-dhcp-server + cat >> /etc/dhcp/dhcpd.conf << EOF subnet 192.168.1.0 netmask 255.255.255.0 { range 192.168.1.2 192.168.1.253; option subnet-mask 255.255.255.0; @@ -360,18 +396,19 @@ subnet 192.168.1.0 netmask 255.255.255.0 { } EOF -# Download DHCP config files -cd /opt -wget $REPO_URL_BLOB/org.onap.demo/vnfs/vcpe/$INSTALL_SCRIPT_VERSION/v_gw_init.sh -wget $REPO_URL_BLOB/org.onap.demo/vnfs/vcpe/$INSTALL_SCRIPT_VERSION/v_gw.sh -chmod +x v_gw_init.sh -chmod +x v_gw.sh -mv v_gw.sh /etc/init.d -update-rc.d v_gw.sh defaults - -# Rename network interface in openstack Ubuntu 16.04 images. Then, reboot the VM to pick up changes -if [[ $CLOUD_ENV != "rackspace" ]] -then + # Download DHCP config files + cd /opt + wget $REPO_URL_BLOB/org.onap.demo/vnfs/vcpe/$INSTALL_SCRIPT_VERSION/v_gw_init.sh + wget $REPO_URL_BLOB/org.onap.demo/vnfs/vcpe/$INSTALL_SCRIPT_VERSION/v_gw.sh + chmod +x v_gw_init.sh + chmod +x v_gw.sh + mv v_gw.sh /etc/init.d + sed "s/Provides:/$/ v_gw" /etc/init.d/v_gw.sh + update-rc.d v_gw.sh defaults + + # Rename network interface in openstack Ubuntu 16.04 images. Then, reboot the VM to pick up changes + if [[ $CLOUD_ENV != "rackspace" ]] + then sed -i "s/GRUB_CMDLINE_LINUX=.*/GRUB_CMDLINE_LINUX=\"net.ifnames=0 biosdevname=0\"/g" /etc/default/grub grub-mkconfig -o /boot/grub/grub.cfg sed -i "s/ens[0-9]*/eth0/g" /etc/network/interfaces.d/*.cfg @@ -381,4 +418,5 @@ then reboot fi -./v_gw_init.sh + ./v_gw_init.sh +fi # endif BUILD_STATE != "build" -- cgit 1.2.3-korg