From 9ae5fe2676a7e44dac189158029e3025ae90496d Mon Sep 17 00:00:00 2001 From: Itohan Date: Thu, 26 Oct 2017 22:07:57 -0700 Subject: Fixed vbrg Install, env and yaml scipts Fixed bugs in vCPE vbrg emulator install script Modified Script to include different build modes Fixed here documents bind_nic.sh and set_nat.sh Commented out the 192.168.1.0/24 network configurations in the yaml and env files Change-Id: I2f6dee1843e6e289fe199844ed80d010257bce63 Issue-ID: INT-63 Signed-off-by: Itohan --- vnfs/vCPE/scripts/v_brgemu_install.sh | 537 ++++++++++++++++++---------------- 1 file changed, 283 insertions(+), 254 deletions(-) mode change 100644 => 100755 vnfs/vCPE/scripts/v_brgemu_install.sh (limited to 'vnfs/vCPE/scripts') diff --git a/vnfs/vCPE/scripts/v_brgemu_install.sh b/vnfs/vCPE/scripts/v_brgemu_install.sh old mode 100644 new mode 100755 index 86d08b4b..64621c0a --- a/vnfs/vCPE/scripts/v_brgemu_install.sh +++ b/vnfs/vCPE/scripts/v_brgemu_install.sh @@ -11,72 +11,77 @@ HC2VPP_SOURCE_REPO_URL=$(cat /opt/config/hc2vpp_source_repo_url.txt) HC2VPP_SOURCE_REPO_BRANCH=$(cat /opt/config/hc2vpp_source_repo_branch.txt) CLOUD_ENV=$(cat /opt/config/cloud_env.txt) +# Build states are: +# 'build' - just build the code +# 'done' - code is build, install and setup +# 'auto' - bulid, install and setup +BUILD_STATE="auto" + +if [[ -f /opt/config/compile_state.txt ]] +then + BUILD_STATE=$(cat /opt/config/compile_state.txt) +fi + # Convert Network CIDR to Netmask cdr2mask () { - # Number of args to shift, 255..255, first non-255 byte, zeroes - set -- $(( 5 - ($1 / 8) )) 255 255 255 255 $(( (255 << (8 - ($1 % 8))) & 255 )) 0 0 0 - [ $1 -gt 1 ] && shift $1 || shift - echo ${1-0}.${2-0}.${3-0}.${4-0} + # Number of args to shift, 255..255, first non-255 byte, zeroes + set -- $(( 5 - ($1 / 8) )) 255 255 255 255 $(( (255 << (8 - ($1 % 8))) & 255 )) 0 0 0 + [ $1 -gt 1 ] && shift $1 || shift + echo ${1-0}.${2-0}.${3-0}.${4-0} } # OpenStack network configuration -if [[ $CLOUD_ENV == "openstack" ]] +if [[ $BUILD_STATE != "build" ]] then - echo 127.0.0.1 $(hostname) >> /etc/hosts + if [[ $CLOUD_ENV == "openstack" ]] + then + echo 127.0.0.1 $(hostname) >> /etc/hosts - # Allow remote login as root - mv /root/.ssh/authorized_keys /root/.ssh/authorized_keys.bk - cp /home/ubuntu/.ssh/authorized_keys /root/.ssh - - MTU=$(/sbin/ifconfig | grep MTU | sed 's/.*MTU://' | sed 's/ .*//' | sort -n | head -1) - - IP=$(cat /opt/config/brgemu_net_ipaddr.txt) - BITS=$(cat /opt/config/brgemu_net_cidr.txt | cut -d"/" -f2) - NETMASK=$(cdr2mask $BITS) - echo "auto eth2" >> /etc/network/interfaces - echo "iface eth2 inet static" >> /etc/network/interfaces - echo " address $IP" >> /etc/network/interfaces - echo " netmask $NETMASK" >> /etc/network/interfaces - echo " mtu $MTU" >> /etc/network/interfaces - - ifup eth2 -fi + # Allow remote login as root + mv /root/.ssh/authorized_keys /root/.ssh/authorized_keys.bk + cp /home/ubuntu/.ssh/authorized_keys /root/.ssh + fi +fi # endif BUILD_STATE != "build" -# Download required dependencies -echo "deb http://ppa.launchpad.net/openjdk-r/ppa/ubuntu $(lsb_release -c -s) main" >> /etc/apt/sources.list.d/java.list -echo "deb-src http://ppa.launchpad.net/openjdk-r/ppa/ubuntu $(lsb_release -c -s) main" >> /etc/apt/sources.list.d/java.list -apt-get update -apt-get install --allow-unauthenticated -y wget openjdk-8-jdk apt-transport-https ca-certificates g++ libcurl4-gnutls-dev -sleep 1 - -# Install the tools required for download codes -apt-get install -y expect git patch - -#Download and build the VPP codes -cd /opt -git clone ${VPP_SOURCE_REPO_URL} -b ${VPP_SOURCE_REPO_BRANCH} vpp -wget -O VPP-Add-Option82-Nat-Filter-For-vBRG.patch ${VPP_PATCH_URL} - -cd vpp -patch -p1 < ../VPP-Add-Option82-Nat-Filter-For-vBRG.patch -expect -c " - set timeout 60; - spawn make install-dep; - expect { - \"Do you want to continue?*\" {send \"Y\r\"; interact} - } -" - -cd build-root -./bootstrap.sh -make V=0 PLATFORM=vpp TAG=vpp install-deb - -# Install the VPP package -dpkg -i *.deb -systemctl stop vpp - -# Auto-start configuration for the VPP -cat > /etc/vpp/startup.conf << EOF +if [[ $BUILD_STATE != "done" ]] +then + # Download required dependencies + echo "deb http://ppa.launchpad.net/openjdk-r/ppa/ubuntu $(lsb_release -c -s) main" >> /etc/apt/sources.list.d/java.list + echo "deb-src http://ppa.launchpad.net/openjdk-r/ppa/ubuntu $(lsb_release -c -s) main" >> /etc/apt/sources.list.d/java.list + apt-get update + apt-get install --allow-unauthenticated -y wget openjdk-8-jdk apt-transport-https ca-certificates g++ libcurl4-gnutls-dev + sleep 1 + + # Install the tools required for download codes + apt-get install -y expect git patch make linux-image-extra-`uname -r` + #Download and build the VPP codes + cd /opt + git clone ${VPP_SOURCE_REPO_URL} -b ${VPP_SOURCE_REPO_BRANCH} vpp + wget -O VPP-Add-Option82-Nat-Filter-For-vBRG.patch ${VPP_PATCH_URL} + + cd vpp + patch -p1 < ../VPP-Add-Option82-Nat-Filter-For-vBRG.patch + expect -c " + set timeout 60; + spawn make install-dep; + expect { + \"Do you want to continue?*\" {send \"Y\r\"; interact} + } + " + + cd build-root + ./bootstrap.sh + make V=0 PLATFORM=vpp TAG=vpp install-deb + + # Install the VPP package + dpkg -i *.deb + systemctl stop vpp +fi # endif BUILD_STATE != "done" + +if [[ $BUILD_STATE != "build" ]] +then + # Auto-start configuration for the VPP + cat > /etc/vpp/startup.conf << EOF unix { nodaemon @@ -95,95 +100,109 @@ api-segment { } cpu { - ## In the VPP there is one main thread and optionally the user can create worker(s) - ## The main thread and worker thread(s) can be pinned to CPU core(s) manually or automatically + ## In the VPP there is one main thread and optionally the user can create worker(s) + ## The main thread and worker thread(s) can be pinned to CPU core(s) manually or automatically - ## Manual pinning of thread(s) to CPU core(s) + ## Manual pinning of thread(s) to CPU core(s) - ## Set logical CPU core where main thread runs - # main-core 1 + ## Set logical CPU core where main thread runs + # main-core 1 - ## Set logical CPU core(s) where worker threads are running - # corelist-workers 2-3,18-19 + ## Set logical CPU core(s) where worker threads are running + # corelist-workers 2-3,18-19 - ## Automatic pinning of thread(s) to CPU core(s) + ## Automatic pinning of thread(s) to CPU core(s) - ## Sets number of CPU core(s) to be skipped (1 ... N-1) - ## Skipped CPU core(s) are not used for pinning main thread and working thread(s). - ## The main thread is automatically pinned to the first available CPU core and worker(s) - ## are pinned to next free CPU core(s) after core assigned to main thread - # skip-cores 4 + ## Sets number of CPU core(s) to be skipped (1 ... N-1) + ## Skipped CPU core(s) are not used for pinning main thread and working thread(s). + ## The main thread is automatically pinned to the first available CPU core and worker(s) + ## are pinned to next free CPU core(s) after core assigned to main thread + # skip-cores 4 - ## Specify a number of workers to be created - ## Workers are pinned to N consecutive CPU cores while skipping "skip-cores" CPU core(s) - ## and main thread's CPU core - # workers 2 + ## Specify a number of workers to be created + ## Workers are pinned to N consecutive CPU cores while skipping "skip-cores" CPU core(s) + ## and main thread's CPU core + # workers 2 - ## Set scheduling policy and priority of main and worker threads + ## Set scheduling policy and priority of main and worker threads - ## Scheduling policy options are: other (SCHED_OTHER), batch (SCHED_BATCH) - ## idle (SCHED_IDLE), fifo (SCHED_FIFO), rr (SCHED_RR) - # scheduler-policy fifo + ## Scheduling policy options are: other (SCHED_OTHER), batch (SCHED_BATCH) + ## idle (SCHED_IDLE), fifo (SCHED_FIFO), rr (SCHED_RR) + # scheduler-policy fifo - ## Scheduling priority is used only for "real-time policies (fifo and rr), - ## and has to be in the range of priorities supported for a particular policy - # scheduler-priority 50 + ## Scheduling priority is used only for "real-time policies (fifo and rr), + ## and has to be in the range of priorities supported for a particular policy + # scheduler-priority 50 } # dpdk { - ## Change default settings for all intefaces - # dev default { - ## Number of receive queues, enables RSS - ## Default is 1 - # num-rx-queues 3 - - ## Number of transmit queues, Default is equal - ## to number of worker threads or 1 if no workers treads - # num-tx-queues 3 - - ## Number of descriptors in transmit and receive rings - ## increasing or reducing number can impact performance - ## Default is 1024 for both rx and tx - # num-rx-desc 512 - # num-tx-desc 512 - - ## VLAN strip offload mode for interface - ## Default is off - # vlan-strip-offload on - # } - - ## Whitelist specific interface by specifying PCI address - # dev 0000:02:00.0 - - ## Whitelist specific interface by specifying PCI address and in - ## addition specify custom parameters for this interface - # dev 0000:02:00.1 { - # num-rx-queues 2 - # } - - ## Change UIO driver used by VPP, Options are: igb_uio, vfio-pci - ## and uio_pci_generic (default) - # uio-driver vfio-pci - - ## Disable mutli-segment buffers, improves performance but - ## disables Jumbo MTU support - # no-multi-seg - - ## Increase number of buffers allocated, needed only in scenarios with - ## large number of interfaces and worker threads. Value is per CPU socket. - ## Default is 16384 - # num-mbufs 128000 - - ## Change hugepages allocation per-socket, needed only if there is need for - ## larger number of mbufs. Default is 256M on each detected CPU socket - # socket-mem 2048,2048 + ## Change default settings for all intefaces + # dev default { + ## Number of receive queues, enables RSS + ## Default is 1 + # num-rx-queues 3 + + ## Number of transmit queues, Default is equal + ## to number of worker threads or 1 if no workers treads + # num-tx-queues 3 + + ## Number of descriptors in transmit and receive rings + ## increasing or reducing number can impact performance + ## Default is 1024 for both rx and tx + # num-rx-desc 512 + # num-tx-desc 512 + + ## VLAN strip offload mode for interface + ## Default is off + # vlan-strip-offload on + # } + + ## Whitelist specific interface by specifying PCI address + # dev 0000:02:00.0 + ## Whitelist specific interface by specifying PCI address and in + ## addition specify custom parameters for this interface + # dev 0000:02:00.1 { + # num-rx-queues 2 + # } + + ## Change UIO driver used by VPP, Options are: igb_uio, vfio-pci + ## and uio_pci_generic (default) + # uio-driver vfio-pci + + ## Disable mutli-segment buffers, improves performance but + ## disables Jumbo MTU support + # no-multi-seg + + ## Increase number of buffers allocated, needed only in scenarios with + ## large number of interfaces and worker threads. Value is per CPU socket. + ## Default is 16384 + # num-mbufs 128000 + + ## Change hugepages allocation per-socket, needed only if there is need for + ## larger number of mbufs. Default is 256M on each detected CPU socket + # socket-mem 2048,2048 # } EOF -cat > /etc/vpp/setup.gate << EOF -set int state GigabitEthernet0/8/0 up -set dhcp client intfc GigabitEthernet0/8/0 hostname brg-emulator + #Get list of network device PCI bus addresses + get_nic_pci_list() { + while read -r line ; do + if [ "$line" != "${line#*network device}" ]; then + echo -n "${line%% *} " + fi + done < <(lspci) + } + + NICS=$(get_nic_pci_list) + NICS=`echo ${NICS} | sed 's/[0]\+\([0-9]\)/\1/g' | sed 's/[.:]/\//g'` + echo $NICS + + BRG_BNG_NIC=GigabitEthernet`echo ${NICS} | cut -d " " -f 2` # second interface in list + + cat > /etc/vpp/setup.gate << EOF +set int state ${BRG_BNG_NIC} up +set dhcp client intfc ${BRG_BNG_NIC} hostname brg-emulator tap connect lstack set int state tap-0 up @@ -192,120 +211,119 @@ set interface l2 bridge tap-0 10 0 set bridge-domain arp term 10 EOF -cat >> /opt/config/ip.txt << EOF + cat >> /opt/config/ip.txt << EOF hcip: 192.168.4.20 EOF -cat > /opt/bind_nic.sh << EOF + cat > /opt/bind_nic.sh << 'EOF' +#!/bin/bash while : do - if [[ ! $(ps -aux | grep [[:alnum:]]*/vpp/startup.conf | wc -l) = 2 ]]; then - #echo "vpp not running" - else - break - fi -done -nic_name=$(lshw -C network | grep "logical name:") -nic_name=${nic_name#*:} -ifconfig $nic_name down -service vpp restart -while read -r line -do - re=${line#*/[0-9]/[0-9]} - if [ "$line" != "$re" ]; then - nic=${line%(*} - vppctl set dhcp client intfc $nic - vppctl set int state $nic up - break - fi -done < <(vppctl show int addr) -while read -r sdnc_ip -do - if [[ $sdnc_ip = sdnc_ip* ]]; then - sdnc_ip=${sdnc_ip#*" "} - break + if [[ ! $(ps -aux | grep [[:alnum:]]*/vpp/startup.conf | wc -l) = 2 ]]; then + echo "vpp not running" + else + break fi -done < /opt/config/ip.txt +done + +sdnc_ip=$(cat /opt/config/sdnc_ip.txt) vppctl tap connect tap0 -vppctl set int state tap-0 up -vppctl set int ip addr tap-0 20.0.0.40/24 +sleep 3 +vppctl set int state tap-1 up +vppctl set int ip addr tap-1 20.0.0.40/24 ifconfig tap0 192.168.4.20/24 route add -host $sdnc_ip tap0 route add -host 20.0.0.40 tap0 -vppctl ip route add 192.168.4.0/24 via tap-0 -vppctl set interface snat in tap-0 out $nic +vppctl ip route add 192.168.4.0/24 via tap-1 +vppctl set interface snat in tap-1 out ${BRG_BNG_NIC} +vppctl snat add interface address ${BRG_BNG_NIC} + + while read -r hw do - if [[ "$hw" = tap-0* ]]; then - read -r hw - hw_addr=${hw#" "} - hw_addr=${hw_addr#" "} - break - fi + if [[ "$hw" = tap-1* ]]; + then + read -r hw + hw_addr=${hw##* } + break + fi done < <(vppctl show hardware) arp -s $sdnc_ip $hw_addr EOF -chmod +x /opt/bind_nic.sh + chmod +x /opt/bind_nic.sh -#set nat rule -cat > /opt/set_nat.sh << EOF + #set nat rule + cat > /opt/set_nat.sh << 'EOF' #! /bin/bash while : do - if [[ ! $(ps -aux | grep [[:alnum:]]*/vpp/startup.conf | wc -l) = 2 ]]; then - #echo "vpp not running" + if [[ ! $(ps -aux | grep [[:alnum:]]*/vpp/startup.conf | wc -l) = 2 ]]; + then + #echo "vpp not running" + continue + fi + + flag=0 + while read -r line + do + if [ flag = 0 ]; + then + re=${line#*/[0-9]/[0-9]} + if [ "$line" != "$re" ]; + then + flag=1 + else + flag=0 continue - fi - - flag=0 - while read -r line - do - if [ flag = 0 ]; then - re=${line#*/[0-9]/[0-9]} - if [ "$line" != "$re" ]; then - flag=1 - else - flag=0 - continue - fi - else - ip=${line%/*} - if [[ $ip = *\.*\.*\.* ]]; then - #echo "ip address is $ip" - if [ ! -f /opt/config/ip.txt ]; then - echo "file /opt/config/ip.txt doesn't exists" - continue - fi - while read -r tap_ip - do - if [[ $tap_ip = hcip* ]]; then - tap_ip=${tap_ip#*" "} - echo "hc tap ip address is $tap_ip" - vppctl snat add static mapping local $tap_ip external $ip - exit 0 - fi - done < /opt/config/ip.txt - else - if [[ ! $ip = */[0-9] ]]; then - flag=0 - #echo "not correct" - fi - fi + fi + else + ip=${line%/*} + if [[ $ip = *\.*\.*\.* ]]; + then + #echo "ip address is $ip" + if [ ! -f /opt/config/ip.txt ]; + then + echo "file /opt/config/ip.txt doesn't exists" + continue + fi + while read -r tap_ip + do + if [[ $tap_ip = hcip* ]]; + then + tap_ip=${tap_ip#*" "} + echo "hc tap ip address is $tap_ip" + vppctl snat add static mapping tcp local $tap_ip 8183 external $ip 8183 + exit 0 + fi + done < /opt/config/ip.txt + else + if [[ ! $ip = */[0-9] ]]; + then + flag=0 + #echo "not correct" fi - done < <(vppctl show int addr) - sleep 1 + fi + fi + done < <(vppctl show int addr) + sleep 1 done EOF -chmod +x /opt/set_nat.sh + chmod +x /opt/set_nat.sh +fi # endif BUILD_STATE != "build" -# Download and install HC2VPP from source -cd /opt -git clone ${HC2VPP_SOURCE_REPO_URL} -b ${HC2VPP_SOURCE_REPO_BRANCH} hc2vpp +if [[ $BUILD_STATE != "done" ]] +then -apt-get install -y maven -cat > ~/.m2/settings.xml << EOF + # Download and install HC2VPP from source + cd /opt + git clone ${HC2VPP_SOURCE_REPO_URL} -b ${HC2VPP_SOURCE_REPO_BRANCH} hc2vpp + + apt-get -f -y install + apt-get install -y maven + mkdir -p /root/.m2 + cat > ~/.m2/settings.xml << EOF ~/.m2/settings.xml << EOF - fd.io-release + fd.io-release fd.io-mirror @@ -362,7 +380,7 @@ cat > ~/.m2/settings.xml << EOF - fd.io-snapshot + fd.io-snapshot fd.io-snapshot https://nexus.fd.io/content/repositories/fd.io.snapshot/ @@ -413,16 +431,26 @@ cat > ~/.m2/settings.xml << EOF EOF -cd hc2vpp -mvn clean install -l_version=$(cat pom.xml | grep "" | head -1) -l_version=$(echo "${l_version%<*}") -l_version=$(echo "${l_version#*>}") -mv vpp-integration/minimal-distribution/target/vpp-integration-distribution-${l_version}-hc/vpp-integration-distribution-${l_version} /opt/honeycomb -sed -i 's/127.0.0.1/0.0.0.0/g' /opt/honeycomb/config/honeycomb.json - -# Create systemctl service for Honeycomb -cat > /etc/systemd/system/honeycomb.service << EOF + cd hc2vpp + mvn clean install + l_version=$(cat pom.xml | grep "" | head -1) + l_version=$(echo "${l_version%<*}") + l_version=$(echo "${l_version#*>}") + mv vpp-integration/minimal-distribution/target/vpp-integration-distribution-${l_version}-hc/vpp-integration-distribution-${l_version} /opt/honeycomb + sed -i 's/127.0.0.1/0.0.0.0/g' /opt/honeycomb/config/honeycomb.json + + # Disable automatic upgrades + if [[ $CLOUD_ENV != "rackspace" ]] + then + echo "APT::Periodic::Unattended-Upgrade \"0\";" >> /etc/apt/apt.conf.d/10periodic + sed -i 's/\(APT::Periodic::Unattended-Upgrade\) "1"/\1 "0"/' /etc/apt/apt.conf.d/20auto-upgrades + fi +fi # endif BUILD_STATE != "done" + +if [[ $BUILD_STATE != "build" ]] +then + # Create systemctl service for Honeycomb + cat > /etc/systemd/system/honeycomb.service << EOF [Unit] Description=Honeycomb Agent for the VPP control plane Documentation=https://wiki.fd.io/view/Honeycomb @@ -437,27 +465,28 @@ RestartSec=10 [Install] WantedBy=multi-user.target EOF -systemctl enable /etc/systemd/system/honeycomb.service - -# Download DHCP config files -cd /opt -wget $REPO_URL_BLOB/org.onap.demo/vnfs/vcpe/$INSTALL_SCRIPT_VERSION/v_brgemu_init.sh -wget $REPO_URL_BLOB/org.onap.demo/vnfs/vcpe/$INSTALL_SCRIPT_VERSION/v_brgemu.sh -chmod +x v_brgemu_init.sh -chmod +x v_brgemu.sh -mv v_brgemu.sh /etc/init.d -update-rc.d v_brgemu.sh defaults - -# Rename network interface in openstack Ubuntu 16.04 images. Then, reboot the VM to pick up changes -if [[ $CLOUD_ENV != "rackspace" ]] -then - sed -i "s/GRUB_CMDLINE_LINUX=.*/GRUB_CMDLINE_LINUX=\"net.ifnames=0 biosdevname=0\"/g" /etc/default/grub - grub-mkconfig -o /boot/grub/grub.cfg - sed -i "s/ens[0-9]*/eth0/g" /etc/network/interfaces.d/*.cfg - sed -i "s/ens[0-9]*/eth0/g" /etc/udev/rules.d/70-persistent-net.rules - echo 'network: {config: disabled}' >> /etc/cloud/cloud.cfg.d/99-disable-network-config.cfg - echo "APT::Periodic::Unattended-Upgrade \"0\";" >> /etc/apt/apt.conf.d/10periodic - reboot -fi - -./v_brgemu_init.sh + systemctl enable /etc/systemd/system/honeycomb.service + + # Download DHCP config files + cd /opt + wget $REPO_URL_BLOB/org.onap.demo/vnfs/vcpe/$INSTALL_SCRIPT_VERSION/v_brgemu_init.sh + wget $REPO_URL_BLOB/org.onap.demo/vnfs/vcpe/$INSTALL_SCRIPT_VERSION/v_brgemu.sh + sed -i '/# Provides:/c\# Provides: vbrg ' /opt/v_brgemu.sh + chmod +x v_brgemu_init.sh + chmod +x v_brgemu.sh + mv v_brgemu.sh /etc/init.d + update-rc.d v_brgemu.sh defaults + + # Rename network interface in openstack Ubuntu 16.04 images. Then, reboot the VM to pick up changes + if [[ $CLOUD_ENV != "rackspace" ]] + then + sed -i "s/GRUB_CMDLINE_LINUX=.*/GRUB_CMDLINE_LINUX=\"net.ifnames=0 biosdevname=0\"/g" /etc/default/grub + grub-mkconfig -o /boot/grub/grub.cfg + sed -i "s/ens[0-9]*/eth0/g" /etc/network/interfaces.d/*.cfg + sed -i "s/ens[0-9]*/eth0/g" /etc/udev/rules.d/70-persistent-net.rules + echo 'network: {config: disabled}' >> /etc/cloud/cloud.cfg.d/99-disable-network-config.cfg + reboot + fi + + ./v_brgemu_init.sh +fi # endif BUILD_STATE != "build" -- cgit 1.2.3-korg