+

Format
Project related configuration options
Build related configuration options
Configuration options related to warning and progress messages
Configuration options related to the input files
Configuration options related to source browsing
Configuration options related to the alphabetical class index
Configuration options related to the HTML output
Configuration options related to the LaTeX output
Configuration options related to the RTF output
Configuration options related to the man page output
Configuration options related to the XML output
Configuration options related to the DOCBOOK output
Configuration options for the AutoGen Definitions output
Configuration options related to the Perl module output
Configuration options related to the preprocessor
Configuration options related to external references
Configuration options related to the dot tool
Examples

+

+Format

+

A configuration file is a free-form ASCII text file with a structure that is similar to that of a Makefile, with the default name Doxyfile. It is parsed by doxygen. The file may contain tabs and newlines for formatting purposes. The statements in the file are case-sensitive. Comments may be placed anywhere within the file (except within quotes). Comments beginning with two hash characters (##) are kept when updating the configuration file and are placed in front of the TAG they are in front of. Comments beginning with two hash characters (##) at the beginning of the configuration file are also kept and placed at the beginning of the file. Comments beginning with two hash characters (##) at the end of the configuration file are also kept and placed at the end of the file. Comments begin with the hash character (#) and ends at the end of the line.

+

The file essentially consists of a list of assignment statements. Each statement consists of a TAG_NAME written in capitals, followed by the equal sign (=) and one or more values. If the same tag is assigned more than once, the last assignment overwrites any earlier assignment. For tags that take a list as their argument, the += operator can be used instead of = to append new values to the list. Values are sequences of non-blanks. If the value should contain one or more blanks it must be surrounded by quotes ("..."). Multiple lines can be concatenated by inserting a backslash (\) as the last character of a line. Environment variables can be expanded using the pattern $(ENV_VARIABLE_NAME).

+

You can also include part of a configuration file from another configuration file using a @INCLUDE tag as follows:

@INCLUDE = config_file_name
+

The include file is searched in the current working directory. You can also specify a list of directories that should be searched before looking in the current working directory. Do this by putting a @INCLUDE_PATH tag with these paths before the @INCLUDE tag, e.g.:

@INCLUDE_PATH = my_config_dir
+

The configuration options can be divided into several categories. Below is an alphabetical index of the tags that are recognized followed by the descriptions of the tags grouped by category.

+

+Project related configuration options

+

DOXYFILE_ENCODING

This tag specifies the encoding used for all characters in the config file that follow. The default is UTF-8 which is also the encoding used for all text before the first occurrence of this tag. Doxygen uses libiconv (or the iconv built into libc) for the transcoding. See http://www.gnu.org/software/libiconv for the list of possible encodings.

+

The default value is: UTF-8.

+

PROJECT_NAME

The PROJECT_NAME tag is a single word (or a sequence of words surrounded by double-quotes, unless you are using Doxywizard) that should identify the project for which the documentation is generated. This name is used in the title of most generated pages and in a few other places.

+

The default value is: My Project.

+

PROJECT_NUMBER

The PROJECT_NUMBER tag can be used to enter a project or revision number. This could be handy for archiving the generated documentation or if some version control system is used.

+

PROJECT_BRIEF

Using the PROJECT_BRIEF tag one can provide an optional one line description for a project that appears at the top of each page and should give viewer a quick idea about the purpose of the project. Keep the description short.

+

PROJECT_LOGO

With the PROJECT_LOGO tag one can specify a logo or an icon that is included in the documentation. The maximum height of the logo should not exceed 55 pixels and the maximum width should not exceed 200 pixels. Doxygen will copy the logo to the output directory.

+

OUTPUT_DIRECTORY

The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path into which the generated documentation will be written. If a relative path is entered, it will be relative to the location where doxygen was started. If left blank the current directory will be used.

+

CREATE_SUBDIRS

If the CREATE_SUBDIRS tag is set to YES then doxygen will create 4096 sub-directories (in 2 levels) under the output directory of each output format and will distribute the generated files over these directories. Enabling this option can be useful when feeding doxygen a huge amount of source files, where putting all generated files in the same directory would otherwise causes performance problems for the file system.

+

The default value is: NO.

+

ALLOW_UNICODE_NAMES

If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII characters to appear in the names of generated files. If set to NO, non-ASCII characters will be escaped, for example _xE3_x81_x84 will be used for Unicode U+3044.

+

The default value is: NO.

+

OUTPUT_LANGUAGE

The OUTPUT_LANGUAGE tag is used to specify the language in which all documentation generated by doxygen is written. Doxygen will use this information to generate all constant output in the proper language.

+

Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese, Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States), Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian, Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages), Korean, Korean-en (Korean with English messages), Latvian, Lithuanian, Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish, Ukrainian and Vietnamese.

+

The default value is: English.

+

BRIEF_MEMBER_DESC

If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member descriptions after the members that are listed in the file and class documentation (similar to Javadoc). Set to NO to disable this.

+

The default value is: YES.

+

REPEAT_BRIEF

If the REPEAT_BRIEF tag is set to YES, doxygen will prepend the brief description of a member or function before the detailed description
+Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the brief descriptions will be completely suppressed.

+

The default value is: YES.

+

ABBREVIATE_BRIEF

This tag implements a quasi-intelligent brief description abbreviator that is used to form the text in various listings. Each string in this list, if found as the leading text of the brief description, will be stripped from the text and the result, after processing the whole list, is used as the annotated text. Otherwise, the brief description is used as-is. If left blank, the following values are used ($name is automatically replaced with the name of the entity): The $name class, The $name widget, The $name file, is, provides, specifies, contains, represents, a, an and the.

+

ALWAYS_DETAILED_SEC

If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then doxygen will generate a detailed section even if there is only a brief description.

+

The default value is: NO.

+

INLINE_INHERITED_MEMB

If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all inherited members of a class in the documentation of that class as if those members were ordinary class members. Constructors, destructors and assignment operators of the base classes will not be shown.

+

The default value is: NO.

+

FULL_PATH_NAMES

If the FULL_PATH_NAMES tag is set to YES, doxygen will prepend the full path before files name in the file list and in the header files. If set to NO the shortest path that makes the file name unique will be used

+

The default value is: YES.

+

STRIP_FROM_PATH

The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path. Stripping is only done if one of the specified strings matches the left-hand part of the path. The tag can be used to show relative paths in the file list. If left blank the directory from which doxygen is run is used as the path to strip.
+Note that you can specify absolute paths here, but also relative paths, which will be relative from the directory where doxygen is started.

+

This tag requires that the tag FULL_PATH_NAMES is set to YES.

+

STRIP_FROM_INC_PATH

The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the path mentioned in the documentation of a class, which tells the reader which header file to include in order to use a class. If left blank only the name of the header file containing the class definition is used. Otherwise one should specify the list of include paths that are normally passed to the compiler using the -I flag.

+

SHORT_NAMES

If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but less readable) file names. This can be useful is your file systems doesn't support long names like on DOS, Mac, or CD-ROM.

+

The default value is: NO.

+

JAVADOC_AUTOBRIEF

If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the first line (until the first dot) of a Javadoc-style comment as the brief description. If set to NO, the Javadoc-style will behave just like regular Qt-style comments (thus requiring an explicit @brief command for a brief description.)

+

The default value is: NO.

+

QT_AUTOBRIEF

If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first line (until the first dot) of a Qt-style comment as the brief description. If set to NO, the Qt-style will behave just like regular Qt-style comments (thus requiring an explicit \brief command for a brief description.)

+

The default value is: NO.

+

MULTILINE_CPP_IS_BRIEF

The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a multi-line C++ special comment block (i.e. a block of //! or /// comments) as a brief description. This used to be the default behavior. The new default is to treat a multi-line C++ comment block as a detailed description. Set this tag to YES if you prefer the old behavior instead.
+Note that setting this tag to YES also means that rational rose comments are not recognized any more.

+

The default value is: NO.

+

INHERIT_DOCS

If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the documentation from any documented member that it re-implements.

+

The default value is: YES.

+

SEPARATE_MEMBER_PAGES

If the SEPARATE_MEMBER_PAGES tag is set to YES then doxygen will produce a new page for each member. If set to NO, the documentation of a member will be part of the file/class/namespace that contains it.

+

The default value is: NO.

+

TAB_SIZE

The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen uses this value to replace tabs by spaces in code fragments.

+

Minimum value: 1, maximum value: 16, default value: 4.

+

ALIASES

This tag can be used to specify a number of aliases that act as commands in the documentation. An alias has the form:

 name=value
+

For example adding

 "sideeffect=@par Side Effects:\n" 
+

will allow you to put the command \sideeffect (or @sideeffect) in the documentation, which will result in a user-defined paragraph with heading "Side Effects:". You can put \n's in the value part of an alias to insert newlines.

+

TCL_SUBST

This tag can be used to specify a number of word-keyword mappings (TCL only). A mapping has the form "name=value". For example adding "class=itcl::class" will allow you to use the command class in the itcl::class meaning.

+

OPTIMIZE_OUTPUT_FOR_C

Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources only. Doxygen will then generate output that is more tailored for C. For instance, some of the names that are used will be different. The list of all members will be omitted, etc.

+

The default value is: NO.

+

OPTIMIZE_OUTPUT_JAVA

Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or Python sources only. Doxygen will then generate output that is more tailored for that language. For instance, namespaces will be presented as packages, qualified scopes will look different, etc.

+

The default value is: NO.

+

OPTIMIZE_FOR_FORTRAN

Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran sources. Doxygen will then generate output that is tailored for Fortran.

+

The default value is: NO.

+

OPTIMIZE_OUTPUT_VHDL

Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL sources. Doxygen will then generate output that is tailored for VHDL.

+

The default value is: NO.

+

EXTENSION_MAPPING

Doxygen selects the parser to use depending on the extension of the files it parses. With this tag you can assign which parser to use for a given extension. Doxygen has a built-in mapping, but you can override or extend it using this tag. The format is ext=language, where ext is a file extension, and language is one of the parsers supported by doxygen: IDL, Java, Javascript, C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: Fortran. In the later case the parser tries to guess whether the code is fixed or free formatted code, this is the default for Fortran type files), VHDL.

+

For instance to make doxygen treat .inc files as Fortran files (default is PHP), and .f files as C (default is Fortran), use: inc=Fortran f=C.

+

+Note: For files without extension you can use no_extension as a placeholder.
+Note that for custom extensions you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.

+

MARKDOWN_SUPPORT

If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments according to the Markdown format, which allows for more readable documentation. See http://daringfireball.net/projects/markdown/ for details. The output of markdown processing is further processed by doxygen, so you can mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in case of backward compatibilities issues.

+

The default value is: YES.

+

TOC_INCLUDE_HEADINGS

When the TOC_INCLUDE_HEADINGS tag is set to a non-zero value, all headings up to that level are automatically included in the table of contents, even if they do not have an id attribute.

Note: This feature currently applies only to Markdown headings.

+

Minimum value: 0, maximum value: 99, default value: 0.

+

This tag requires that the tag MARKDOWN_SUPPORT is set to YES.

+

AUTOLINK_SUPPORT

When enabled doxygen tries to link words that correspond to documented classes, or namespaces to their corresponding documentation. Such a link can be prevented in individual cases by putting a % sign in front of the word or globally by setting AUTOLINK_SUPPORT to NO.

+

The default value is: YES.

+

BUILTIN_STL_SUPPORT

If you use STL classes (i.e. std::string, std::vector, etc.) but do not want to include (a tag file for) the STL sources as input, then you should set this tag to YES in order to let doxygen match functions declarations and definitions whose arguments contain STL classes (e.g. func(std::string); versus func(std::string) {}). This also make the inheritance and collaboration diagrams that involve STL classes more complete and accurate.

+

The default value is: NO.

+

CPP_CLI_SUPPORT

If you use Microsoft's C++/CLI language, you should set this option to YES to enable parsing support.

+

The default value is: NO.

+

SIP_SUPPORT

Set the SIP_SUPPORT tag to YES if your project consists of sip sources only. Doxygen will parse them like normal C++ but will assume all classes use public instead of private inheritance when no explicit protection keyword is present.

+

The default value is: NO.

+

IDL_PROPERTY_SUPPORT

For Microsoft's IDL there are propget and propput attributes to indicate getter and setter methods for a property. Setting this option to YES will make doxygen to replace the get and set methods by a property in the documentation. This will only work if the methods are indeed getting or setting a simple type. If this is not the case, or you want to show the methods anyway, you should set this option to NO.

+

The default value is: YES.

+

DISTRIBUTE_GROUP_DOC

If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC tag is set to YES then doxygen will reuse the documentation of the first member in the group (if any) for the other members of the group. By default all members of a group must be documented explicitly.

+

The default value is: NO.

+

GROUP_NESTED_COMPOUNDS

If one adds a struct or class to a group and this option is enabled, then also any nested class or struct is added to the same group. By default this option is disabled and one has to add nested compounds explicitly via \ingroup.

+

The default value is: NO.

+

SUBGROUPING

Set the SUBGROUPING tag to YES to allow class member groups of the same type (for instance a group of public functions) to be put as a subgroup of that type (e.g. under the Public Functions section). Set it to NO to prevent subgrouping. Alternatively, this can be done per class using the \nosubgrouping command.

+

The default value is: YES.

+

INLINE_GROUPED_CLASSES

When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions are shown inside the group in which they are included (e.g. using \ingroup) instead of on a separate page (for HTML and Man pages) or section (for $\mbox{\LaTeX}$ and RTF).
+Note that this feature does not work in combination with SEPARATE_MEMBER_PAGES.

+

The default value is: NO.

+

INLINE_SIMPLE_STRUCTS

When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions with only public data fields or simple typedef fields will be shown inline in the documentation of the scope in which they are defined (i.e. file, namespace, or group documentation), provided this scope is documented. If set to NO, structs, classes, and unions are shown on a separate page (for HTML and Man pages) or section (for $\mbox{\LaTeX}$ and RTF).

+

The default value is: NO.

+

TYPEDEF_HIDES_STRUCT

When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or enum is documented as struct, union, or enum with the name of the typedef. So typedef struct TypeS {} TypeT, will appear in the documentation as a struct with name TypeT. When disabled the typedef will appear as a member of a file, namespace, or class. And the struct will be named TypeS. This can typically be useful for C code in case the coding convention dictates that all compound types are typedef'ed and only the typedef is referenced, never the tag name.

+

The default value is: NO.

+

LOOKUP_CACHE_SIZE

The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given their name and scope. Since this can be an expensive process and often the same symbol appears multiple times in the code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small doxygen will become slower. If the cache is too large, memory is wasted. The cache size is given by this formula: $2^{(16+\mbox{LOOKUP\_CACHE\_SIZE})}$ . The valid range is 0..9, the default is 0, corresponding to a cache size of $2^{16} = 65536$ symbols. At the end of a run doxygen will report the cache usage and suggest the optimal cache size from a speed point of view.

+

Minimum value: 0, maximum value: 9, default value: 0.

+

+Build related configuration options

+

EXTRACT_ALL

If the EXTRACT_ALL tag is set to YES, doxygen will assume all entities in documentation are documented, even if no documentation was available. Private class members and static file members will be hidden unless the EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.

+

Note: This will also disable the warnings about undocumented members that are normally produced when WARNINGS is set to YES.

+

The default value is: NO.

+

EXTRACT_PRIVATE

If the EXTRACT_PRIVATE tag is set to YES, all private members of a class will be included in the documentation.

+

The default value is: NO.

+

EXTRACT_PACKAGE

If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal scope will be included in the documentation.

+

The default value is: NO.

+

EXTRACT_STATIC

If the EXTRACT_STATIC tag is set to YES, all static members of a file will be included in the documentation.

+

The default value is: NO.

+

EXTRACT_LOCAL_CLASSES

If the EXTRACT_LOCAL_CLASSES tag is set to YES, classes (and structs) defined locally in source files will be included in the documentation. If set to NO, only classes defined in header files are included. Does not have any effect for Java sources.

+

The default value is: YES.

+

EXTRACT_LOCAL_METHODS

This flag is only useful for Objective-C code. If set to YES, local methods, which are defined in the implementation section but not in the interface are included in the documentation. If set to NO, only methods in the interface are included.

+

The default value is: NO.

+

EXTRACT_ANON_NSPACES

If this flag is set to YES, the members of anonymous namespaces will be extracted and appear in the documentation as a namespace called 'anonymous_namespace{file}', where file will be replaced with the base name of the file that contains the anonymous namespace. By default anonymous namespace are hidden.

+

The default value is: NO.

+

HIDE_UNDOC_MEMBERS

If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all undocumented members inside documented classes or files. If set to NO these members will be included in the various overviews, but no documentation section is generated. This option has no effect if EXTRACT_ALL is enabled.

+

The default value is: NO.

+

HIDE_UNDOC_CLASSES

If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all undocumented classes that are normally visible in the class hierarchy. If set to NO, these classes will be included in the various overviews. This option has no effect if EXTRACT_ALL is enabled.

+

The default value is: NO.

+

HIDE_FRIEND_COMPOUNDS

If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend (class|struct|union) declarations. If set to NO, these declarations will be included in the documentation.

+

The default value is: NO.

+

HIDE_IN_BODY_DOCS

If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any documentation blocks found inside the body of a function. If set to NO, these blocks will be appended to the function's detailed documentation block.

+

The default value is: NO.

+

INTERNAL_DOCS

The INTERNAL_DOCS tag determines if documentation that is typed after a \internal command is included. If the tag is set to NO then the documentation will be excluded. Set it to YES to include the internal documentation.

+

The default value is: NO.

+

CASE_SENSE_NAMES

If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file names in lower-case letters. If set to YES, upper-case letters are also allowed. This is useful if you have classes or files whose names only differ in case and if your file system supports case sensitive file names. Windows and Mac users are advised to set this option to NO.

+

The default value is: system dependent.

+

HIDE_SCOPE_NAMES

If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with their full class and namespace scopes in the documentation. If set to YES, the scope will be hidden.

+

The default value is: NO.

+

HIDE_COMPOUND_REFERENCE

If the HIDE_COMPOUND_REFERENCE tag is set to NO (default) then doxygen will append additional text to a page's title, such as Class Reference. If set to YES the compound reference will be hidden.

+

The default value is: NO.

+

SHOW_INCLUDE_FILES

If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of the files that are included by a file in the documentation of that file.

+

The default value is: YES.

+

SHOW_GROUPED_MEMB_INC

If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each grouped member an include statement to the documentation, telling the reader which file to include in order to use the member.

+

The default value is: NO.

+

FORCE_LOCAL_INCLUDES

If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include files with double quotes in the documentation rather than with sharp brackets.

+

The default value is: NO.

+

INLINE_INFO

If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the documentation for inline members.

+

The default value is: YES.

+

SORT_MEMBER_DOCS

If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the (detailed) documentation of file and class members alphabetically by member name. If set to NO, the members will appear in declaration order.

+

The default value is: YES.

+

SORT_BRIEF_DOCS

If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief descriptions of file, namespace and class members alphabetically by member name. If set to NO, the members will appear in declaration order. Note that this will also influence the order of the classes in the class list.

+

The default value is: NO.

+

SORT_MEMBERS_CTORS_1ST

If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the (brief and detailed) documentation of class members so that constructors and destructors are listed first. If set to NO the constructors will appear in the respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.

Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief member documentation.; +If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting detailed member documentation.

+

The default value is: NO.

+

SORT_GROUP_NAMES

If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy of group names into alphabetical order. If set to NO the group names will appear in their defined order.

+

The default value is: NO.

+

SORT_BY_SCOPE_NAME

If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by fully-qualified names, including namespaces. If set to NO, the class list will be sorted only by class name, not including the namespace part.

Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.; +This option applies only to the class list, not to the alphabetical list.

+

The default value is: NO.

+

STRICT_PROTO_MATCHING

If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper type resolution of all parameters of a function it will reject a match between the prototype and the implementation of a member function even if there is only one candidate or it is obvious which candidate to choose by doing a simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still accept a match between prototype and implementation in such cases.

+

The default value is: NO.

+

GENERATE_TODOLIST

The GENERATE_TODOLIST tag can be used to enable (YES) or disable (NO) the todo list. This list is created by putting \todo commands in the documentation.

+

The default value is: YES.

+

GENERATE_TESTLIST

The GENERATE_TESTLIST tag can be used to enable (YES) or disable (NO) the test list. This list is created by putting \test commands in the documentation.

+

The default value is: YES.

+

GENERATE_BUGLIST

The GENERATE_BUGLIST tag can be used to enable (YES) or disable (NO) the bug list. This list is created by putting \bug commands in the documentation.

+

The default value is: YES.

+

GENERATE_DEPRECATEDLIST

The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or disable (NO) the deprecated list. This list is created by putting \deprecated commands in the documentation.

+

The default value is: YES.

+

ENABLED_SECTIONS

The ENABLED_SECTIONS tag can be used to enable conditional documentation sections, marked by \if <section_label> ... \endif and \cond <section_label> ... \endcond blocks.

+

MAX_INITIALIZER_LINES

The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the initial value of a variable or macro / define can have for it to appear in the documentation. If the initializer consists of more lines than specified here it will be hidden. Use a value of 0 to hide initializers completely. The appearance of the value of individual variables and macros / defines can be controlled using \showinitializer or \hideinitializer command in the documentation regardless of this setting.

+

Minimum value: 0, maximum value: 10000, default value: 30.

+

SHOW_USED_FILES

Set the SHOW_USED_FILES tag to NO to disable the list of files generated at the bottom of the documentation of classes and structs. If set to YES, the list will mention the files that were used to generate the documentation.

+

The default value is: YES.

+

SHOW_FILES

Set the SHOW_FILES tag to NO to disable the generation of the Files page. This will remove the Files entry from the Quick Index and from the Folder Tree View (if specified).

+

The default value is: YES.

+

SHOW_NAMESPACES

Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces page. This will remove the Namespaces entry from the Quick Index and from the Folder Tree View (if specified).

+

The default value is: YES.

+

FILE_VERSION_FILTER

The FILE_VERSION_FILTER tag can be used to specify a program or script that doxygen should invoke to get the current version for each file (typically from the version control system). Doxygen will invoke the program by executing (via popen()) the command command input-file, where command is the value of the FILE_VERSION_FILTER tag, and input-file is the name of an input file provided by doxygen. Whatever the program writes to standard output is used as the file version.Example of using a shell script as a filter for Unix:

 FILE_VERSION_FILTER = "/bin/sh versionfilter.sh"
+

+ Example shell script for CVS:

#!/bin/sh
+cvs status $1 | sed -n 's/^[ \]*Working revision:[ \t]*\([0-9][0-9\.]*\).*/\1/p'
+

+ Example shell script for Subversion:

#!/bin/sh
+svn stat -v $1 | sed -n 's/^[ A-Z?\*|!]\{1,15\}/r/;s/ \{1,15\}/\/r/;s/ .*//p'
+

+ Example filter for ClearCase:

FILE_VERSION_INFO = "cleartool desc -fmt \%Vn"
+

+

LAYOUT_FILE

The LAYOUT_FILE tag can be used to specify a layout file which will be parsed by doxygen. The layout file controls the global structure of the generated output files in an output format independent way. To create the layout file that represents doxygen's defaults, run doxygen with the -l option. You can optionally specify a file name after the option, if omitted DoxygenLayout.xml will be used as the name of the layout file.
+Note that if you run doxygen from a directory containing a file called DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE tag is left empty.

+

CITE_BIB_FILES

The CITE_BIB_FILES tag can be used to specify one or more bib files containing the reference definitions. This must be a list of .bib files. The .bib extension is automatically appended if omitted. This requires the bibtex tool to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info. For $\mbox{\LaTeX}$ the style of the bibliography can be controlled using LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the search path. See also \cite for info how to create references.

+

+Configuration options related to warning and progress messages

+

QUIET

The QUIET tag can be used to turn on/off the messages that are generated to standard output by doxygen. If QUIET is set to YES this implies that the messages are off.

+

The default value is: NO.

+

WARNINGS

The WARNINGS tag can be used to turn on/off the warning messages that are generated to standard error (stderr) by doxygen. If WARNINGS is set to YES this implies that the warnings are on.
+ Tip: Turn warnings on while writing the documentation.

+

The default value is: YES.

+

WARN_IF_UNDOCUMENTED

If the WARN_IF_UNDOCUMENTED tag is set to YES then doxygen will generate warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag will automatically be disabled.

+

The default value is: YES.

+

WARN_IF_DOC_ERROR

If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for potential errors in the documentation, such as not documenting some parameters in a documented function, or documenting parameters that don't exist or using markup commands wrongly.

+

The default value is: YES.

+

WARN_NO_PARAMDOC

This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that are documented, but have no documentation for their parameters or return value. If set to NO, doxygen will only warn about wrong or incomplete parameter documentation, but not about the absence of documentation.

+

The default value is: NO.

+

WARN_AS_ERROR

If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when a warning is encountered.

+

The default value is: NO.

+

WARN_FORMAT

The WARN_FORMAT tag determines the format of the warning messages that doxygen can produce. The string should contain the $file, $line, and $text tags, which will be replaced by the file and line number from which the warning originated and the warning text. Optionally the format may contain $version, which will be replaced by the version of the file (if it could be obtained via FILE_VERSION_FILTER)

+

The default value is: $file:$line: $text.

+

WARN_LOGFILE

The WARN_LOGFILE tag can be used to specify a file to which warning and error messages should be written. If left blank the output is written to standard error (stderr).

+

+Configuration options related to the input files

+

INPUT

The INPUT tag is used to specify the files and/or directories that contain documented source files. You may enter file names like myfile.cpp or directories like /usr/src/myproject. Separate the files or directories with spaces. See also FILE_PATTERNS and EXTENSION_MAPPING

+

Note: If this tag is empty the current directory is searched.

+

INPUT_ENCODING

This tag can be used to specify the character encoding of the source files that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses libiconv (or the iconv built into libc) for the transcoding. See the libiconv documentation for the list of possible encodings.

+

The default value is: UTF-8.

+

FILE_PATTERNS

If the value of the INPUT tag contains directories, you can use the FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and *.h) to filter out the source-files in the directories.
+ Note that for custom extensions or not directly supported extensions you also need to set EXTENSION_MAPPING for the extension otherwise the files are not read by doxygen.
+ If left blank the following patterns are tested: *.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown, *.md, *.mm, *.dox, *.py, *.pyw, *.f90, *.f95, *.f03, *.f08, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf and *.qsf.

+

RECURSIVE

The RECURSIVE tag can be used to specify whether or not subdirectories should be searched for input files as well.

+

The default value is: NO.

+

EXCLUDE

The EXCLUDE tag can be used to specify files and/or directories that should be excluded from the INPUT source files. This way you can easily exclude a subdirectory from a directory tree whose root is specified with the INPUT tag.
+Note that relative paths are relative to the directory from which doxygen is run.

+

EXCLUDE_SYMLINKS

The EXCLUDE_SYMLINKS tag can be used to select whether or not files or directories that are symbolic links (a Unix file system feature) are excluded from the input.

+

The default value is: NO.

+

EXCLUDE_PATTERNS

If the value of the INPUT tag contains directories, you can use the EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude certain files from those directories.
+Note that the wildcards are matched against the file with absolute path, so to exclude all test directories for example use the pattern */test/*

+

EXCLUDE_SYMBOLS

The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names (namespaces, classes, functions, etc.) that should be excluded from the output. The symbol name can be a fully qualified name, a word, or if the wildcard * is used, a substring. Examples: ANamespace, AClass, AClass::ANamespace, ANamespace::*Test
+Note that the wildcards are matched against the file with absolute path, so to exclude all test directories use the pattern */test/*

+

EXAMPLE_PATH

The EXAMPLE_PATH tag can be used to specify one or more files or directories that contain example code fragments that are included (see the \include command).

+

EXAMPLE_PATTERNS

If the value of the EXAMPLE_PATH tag contains directories, you can use the EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and *.h) to filter out the source-files in the directories. If left blank all files are included.

+

EXAMPLE_RECURSIVE

If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be searched for input files to be used with the \include or \dontinclude commands irrespective of the value of the RECURSIVE tag.

+

The default value is: NO.

+

IMAGE_PATH

The IMAGE_PATH tag can be used to specify one or more files or directories that contain images that are to be included in the documentation (see the \image command).

+

INPUT_FILTER

The INPUT_FILTER tag can be used to specify a program that doxygen should invoke to filter for each input file. Doxygen will invoke the filter program by executing (via popen()) the command:
+ <filter> <input-file>
+ where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the name of an input file. Doxygen will then use the output that the filter program writes to standard output. If FILTER_PATTERNS is specified, this tag will be ignored.
+Note that the filter must not add or remove lines; it is applied before the code is scanned, but not when the output code is generated. If lines are added or removed, the anchors will not be placed correctly.
+Note that for custom extensions or not directly supported extensions you also need to set EXTENSION_MAPPING for the extension otherwise the files are not properly processed by doxygen.
+

+

FILTER_PATTERNS

The FILTER_PATTERNS tag can be used to specify filters on a per file pattern basis. Doxygen will compare the file name with each pattern and apply the filter if there is a match. The filters are a list of the form: pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how filters are used. If the FILTER_PATTERNS tag is empty or if none of the patterns match the file name, INPUT_FILTER is applied.
+Note that for custom extensions or not directly supported extensions you also need to set EXTENSION_MAPPING for the extension otherwise the files are not properly processed by doxygen.
+

+

FILTER_SOURCE_FILES

If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using INPUT_FILTER) will also be used to filter the input files that are used for producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).

+

The default value is: NO.

+

FILTER_SOURCE_PATTERNS

The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file pattern. A pattern will override the setting for FILTER_PATTERN (if any) and it is also possible to disable source filtering for a specific pattern using *.ext= (so without naming a filter).

+

This tag requires that the tag FILTER_SOURCE_FILES is set to YES.

+

USE_MDFILE_AS_MAINPAGE

If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that is part of the input, its contents will be placed on the main page (index.html). This can be useful if you have a project on for instance GitHub and want to reuse the introduction page also for the doxygen output.

+

+Configuration options related to source browsing

+

SOURCE_BROWSER

If the SOURCE_BROWSER tag is set to YES then a list of source files will be generated. Documented entities will be cross-referenced with these sources.
+Note: To get rid of all source code in the generated output, make sure that also VERBATIM_HEADERS is set to NO.

+

The default value is: NO.

+

INLINE_SOURCES

Setting the INLINE_SOURCES tag to YES will include the body of functions, classes and enums directly into the documentation.

+

The default value is: NO.

+

STRIP_CODE_COMMENTS

Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any special comment blocks from generated source code fragments. Normal C, C++ and Fortran comments will always remain visible.

+

The default value is: YES.

+

REFERENCED_BY_RELATION

If the REFERENCED_BY_RELATION tag is set to YES then for each documented function all documented functions referencing it will be listed.

+

The default value is: NO.

+

REFERENCES_RELATION

If the REFERENCES_RELATION tag is set to YES then for each documented function all documented entities called/used by that function will be listed.

+

The default value is: NO.

+

REFERENCES_LINK_SOURCE

If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set to YES then the hyperlinks from functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will link to the documentation.

+

The default value is: YES.

+

SOURCE_TOOLTIPS

If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the source code will show a tooltip with additional information such as prototype, brief description and links to the definition and documentation. Since this will make the HTML file larger and loading of large files a bit slower, you can opt to disable this feature.

+

The default value is: YES.

+

This tag requires that the tag SOURCE_BROWSER is set to YES.

+

USE_HTAGS

If the USE_HTAGS tag is set to YES then the references to source code will point to the HTML generated by the htags(1) tool instead of doxygen built-in source browser. The htags tool is part of GNU's global source tagging system (see http://www.gnu.org/software/global/global.html). You will need version 4.8.6 or higher.
+ To use it do the following:

Install the latest version of global
Enable SOURCE_BROWSER and USE_HTAGS in the config file
Make sure the INPUT points to the root of the source tree
Run doxygen as normal
+ Doxygen will invoke htags (and that will in turn invoke gtags), so these tools must be available from the command line (i.e. in the search path).
+ The result: instead of the source browser generated by doxygen, the links to source code will now point to the output of htags.

+

The default value is: NO.

+

This tag requires that the tag SOURCE_BROWSER is set to YES.

+

VERBATIM_HEADERS

If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a verbatim copy of the header file for each class for which an include is specified. Set to NO to disable this.

See also: Section \class.

+

The default value is: YES.

+

CLANG_ASSISTED_PARSING

If the CLANG_ASSISTED_PARSING tag is set to YES then doxygen will use the clang parser for more accurate parsing at the cost of reduced performance. This can be particularly helpful with template rich C++ code for which doxygen's built-in parser lacks the necessary type information.

+

Note: The availability of this option depends on whether or not doxygen was generated with the -Duse-libclang=ON option for CMake.

+

The default value is: NO.

+

CLANG_OPTIONS

If clang assisted parsing is enabled you can provide the compiler with command line options that you would normally use when invoking the compiler. Note that the include paths will already be set by doxygen for the files and directories specified with INPUT and INCLUDE_PATH.

+

This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.

+

+Configuration options related to the alphabetical class index

+

ALPHABETICAL_INDEX

If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all compounds will be generated. Enable this if the project contains a lot of classes, structs, unions or interfaces.

+

The default value is: YES.

+

COLS_IN_ALPHA_INDEX

The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in which the alphabetical index list will be split.

+

Minimum value: 1, maximum value: 20, default value: 5.

+

This tag requires that the tag ALPHABETICAL_INDEX is set to YES.

+

IGNORE_PREFIX

In case all classes in a project start with a common prefix, all classes will be put under the same header in the alphabetical index. The IGNORE_PREFIX tag can be used to specify a prefix (or a list of prefixes) that should be ignored while generating the index headers.

+

This tag requires that the tag ALPHABETICAL_INDEX is set to YES.

+

+Configuration options related to the HTML output

+

GENERATE_HTML

If the GENERATE_HTML tag is set to YES, doxygen will generate HTML output

+

The default value is: YES.

+

HTML_OUTPUT

The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a relative path is entered the value of OUTPUT_DIRECTORY will be put in front of it.

+

The default directory is: html.

+

This tag requires that the tag GENERATE_HTML is set to YES.

+

HTML_FILE_EXTENSION

The HTML_FILE_EXTENSION tag can be used to specify the file extension for each generated HTML page (for example: .htm, .php, .asp).

+

The default value is: .html.

+

This tag requires that the tag GENERATE_HTML is set to YES.

+

HTML_HEADER

The HTML_HEADER tag can be used to specify a user-defined HTML header file for each generated HTML page. If the tag is left blank doxygen will generate a standard header.
+ To get valid HTML the header file that includes any scripts and style sheets that doxygen needs, which is dependent on the configuration options used (e.g. the setting GENERATE_TREEVIEW). It is highly recommended to start with a default header using

doxygen -w html new_header.html new_footer.html new_stylesheet.css YourConfigFile
+

and then modify the file new_header.html.

+

See also section Doxygen usage for information on how to generate the default header that doxygen normally uses.

+

Note

The header is subject to change so you typically have to regenerate the default header when upgrading to a newer version of doxygen. The following markers have a special meaning inside the header and footer:

$title: will be replaced with the title of the page.
$datetime: will be replaced with current the date and time.
$date: will be replaced with the current date.
$year: will be replaces with the current year.
$doxygenversion: will be replaced with the version of doxygen
$projectname: will be replaced with the name of the project (see PROJECT_NAME)
$projectnumber: will be replaced with the project number (see PROJECT_NUMBER)
$projectbrief: will be replaced with the project brief description (see PROJECT_BRIEF)
$projectlogo: will be replaced with the project logo (see PROJECT_LOGO)
$treeview: will be replaced with links to the javascript and style sheets needed for the navigation tree (or an empty string when GENERATE_TREEVIEW is disabled).
$search: will be replaced with a links to the javascript and style sheets needed for the search engine (or an empty string when SEARCHENGINE is disabled).
$mathjax: will be replaced with a links to the javascript and style sheets needed for the MathJax feature (or an empty string when USE_MATHJAX is disabled).
$relpath^: If CREATE_SUBDIRS is enabled, the command $relpath^ can be used to produce a relative path to the root of the HTML output directory, e.g. use $relpath^doxygen.css, to refer to the standard style sheet.

+

To cope with differences in the layout of the header and footer that depend on configuration settings, the header can also contain special blocks that will be copied to the output or skipped depending on the configuration. Such blocks have the following form:

 <!--BEGIN BLOCKNAME-->
+ Some context copied when condition BLOCKNAME holds
+ <!--END BLOCKNAME-->
+ <!--BEGIN !BLOCKNAME-->
+ Some context copied when condition BLOCKNAME does not hold
+ <!--END !BLOCKNAME-->
+

The following block names are supported:

DISABLE_INDEX: Content within this block is copied to the output when the DISABLE_INDEX option is enabled (so when the index is disabled).
GENERATE_TREEVIEW: Content within this block is copied to the output when the GENERATE_TREEVIEW option is enabled.
SEARCHENGINE: Content within this block is copied to the output when the SEARCHENGINE option is enabled.
PROJECT_NAME: Content within the block is copied to the output when the PROJECT_NAME option is not empty.
PROJECT_NUMBER: Content within the block is copied to the output when the PROJECT_NUMBER option is not empty.
PROJECT_BRIEF: Content within the block is copied to the output when the PROJECT_BRIEF option is not empty.
PROJECT_LOGO: Content within the block is copied to the output when the PROJECT_LOGO option is not empty.
TITLEAREA: Content within this block is copied to the output when a title is visible at the top of each page. This is the case if either PROJECT_NAME, PROJECT_BRIEF, PROJECT_LOGO is filled in or if both DISABLE_INDEX and SEARCHENGINE are enabled.

+

This tag requires that the tag GENERATE_HTML is set to YES.

+

HTML_FOOTER

The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each generated HTML page. If the tag is left blank doxygen will generate a standard footer.

+

See HTML_HEADER for more information on how to generate a default footer and what special commands can be used inside the footer.

+

See also section Doxygen usage for information on how to generate the default footer that doxygen normally uses.

+

This tag requires that the tag GENERATE_HTML is set to YES.

+

HTML_STYLESHEET

The HTML_STYLESHEET tag can be used to specify a user-defined cascading style sheet that is used by each HTML page. It can be used to fine-tune the look of the HTML output. If left blank doxygen will generate a default style sheet.

+

See also section Doxygen usage for information on how to generate the style sheet that doxygen normally uses.

+

Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as it is more robust and this tag (HTML_STYLESHEET) will in the future become obsolete.

+

This tag requires that the tag GENERATE_HTML is set to YES.

+

HTML_EXTRA_STYLESHEET

The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined cascading style sheets that are included after the standard style sheets created by doxygen. Using this option one can overrule certain style aspects. This is preferred over using HTML_STYLESHEET since it does not replace the standard style sheet and is therefore more robust against future updates. Doxygen will copy the style sheet files to the output directory.

Note

The order of the extra style sheet files is of importance (e.g. the last style sheet in the list overrules the setting of the previous ones in the list). Here is an example style sheet that gives the contents area a fixed width:

body {
+        background-color: #CCC;
+        color: black;
+        margin: 0;
+}
+
+div.contents {
+        margin-bottom: 10px;
+        padding: 12px;
+        margin-left: auto;
+        margin-right: auto;
+        width: 960px;
+        background-color: white;
+        border-radius: 8px;
+}
+
+#titlearea {
+        background-color: white;
+}
+
+hr.footer {
+        display: none;
+}
+
+.footer {
+        background-color: #AAA;
+}
+

+This tag requires that the tag GENERATE_HTML is set to YES.

HTML_EXTRA_FILES

The HTML_EXTRA_FILES tag can be used to specify one or more extra images or other source files which should be copied to the HTML output directory. Note that these files will be copied to the base HTML output directory. Use the $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these files. In the HTML_STYLESHEET file, use the file name only. Also note that the files will be copied as-is; there are no commands or markers available.

+

This tag requires that the tag GENERATE_HTML is set to YES.

+

HTML_COLORSTYLE_HUE

The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen will adjust the colors in the style sheet and background images according to this color. Hue is specified as an angle on a colorwheel, see http://en.wikipedia.org/wiki/Hue for more information. For instance the value 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 purple, and 360 is red again.

+

Minimum value: 0, maximum value: 359, default value: 220.

+

This tag requires that the tag GENERATE_HTML is set to YES.

+

HTML_COLORSTYLE_SAT

The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors in the HTML output. For a value of 0 the output will use grayscales only. A value of 255 will produce the most vivid colors.

+

Minimum value: 0, maximum value: 255, default value: 100.

+

This tag requires that the tag GENERATE_HTML is set to YES.

+

HTML_COLORSTYLE_GAMMA

The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the luminance component of the colors in the HTML output. Values below 100 gradually make the output lighter, whereas values above 100 make the output darker. The value divided by 100 is the actual gamma applied, so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not change the gamma.

+

Minimum value: 40, maximum value: 240, default value: 80.

+

This tag requires that the tag GENERATE_HTML is set to YES.

+

HTML_TIMESTAMP

If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML page will contain the date and time when the page was generated. Setting this to YES can help to show when doxygen was last run and thus if the documentation is up to date.

+

The default value is: NO.

+

This tag requires that the tag GENERATE_HTML is set to YES.

+

HTML_DYNAMIC_SECTIONS

If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML documentation will contain sections that can be hidden and shown after the page has loaded.

+

The default value is: NO.

+

This tag requires that the tag GENERATE_HTML is set to YES.

+

HTML_INDEX_NUM_ENTRIES

With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries shown in the various tree structured indices initially; the user can expand and collapse entries dynamically later on. Doxygen will expand the tree to such a level that at most the specified number of entries are visible (unless a fully collapsed tree already exceeds this amount). So setting the number of entries 1 will produce a full collapsed tree by default. 0 is a special value representing an infinite number of entries and will result in a full expanded tree by default.

+

Minimum value: 0, maximum value: 9999, default value: 100.

+

This tag requires that the tag GENERATE_HTML is set to YES.

+

GENERATE_DOCSET

If the GENERATE_DOCSET tag is set to YES, additional index files will be generated that can be used as input for Apple's Xcode 3 integrated development environment, introduced with OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a Makefile in the HTML output directory. Running make will produce the docset in that directory and running make install will install the docset in ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html for more information.

+

The default value is: NO.

+

This tag requires that the tag GENERATE_HTML is set to YES.

+

DOCSET_FEEDNAME

This tag determines the name of the docset feed. A documentation feed provides an umbrella under which multiple documentation sets from a single provider (such as a company or product suite) can be grouped.

+

The default value is: Doxygen generated docs.

+

This tag requires that the tag GENERATE_DOCSET is set to YES.

+

DOCSET_BUNDLE_ID

This tag specifies a string that should uniquely identify the documentation set bundle. This should be a reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen will append .docset to the name.

+

The default value is: org.doxygen.Project.

+

This tag requires that the tag GENERATE_DOCSET is set to YES.

+

DOCSET_PUBLISHER_ID

The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify the documentation publisher. This should be a reverse domain-name style string, e.g. com.mycompany.MyDocSet.documentation.

+

The default value is: org.doxygen.Publisher.

+

This tag requires that the tag GENERATE_DOCSET is set to YES.

+

DOCSET_PUBLISHER_NAME

The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.

+

The default value is: Publisher.

+

This tag requires that the tag GENERATE_DOCSET is set to YES.

+

GENERATE_HTMLHELP

If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three additional HTML index files: index.hhp, index.hhc, and index.hhk. The index.hhp is a project file that can be read by Microsoft's HTML Help Workshop on Windows.
+ The HTML Help Workshop contains a compiler that can convert all HTML output generated by doxygen into a single compiled HTML file (.chm). Compiled HTML files are now used as the Windows 98 help format, and will replace the old Windows help format (.hlp) on all Windows platforms in the future. Compressed HTML files also contain an index, a table of contents, and you can search for words in the documentation. The HTML workshop also contains a viewer for compressed HTML files.

+

The default value is: NO.

+

This tag requires that the tag GENERATE_HTML is set to YES.

+

CHM_FILE

The CHM_FILE tag can be used to specify the file name of the resulting .chm file. You can add a path in front of the file if the result should not be written to the html output directory.

+

This tag requires that the tag GENERATE_HTMLHELP is set to YES.

+

HHC_LOCATION

The HHC_LOCATION tag can be used to specify the location (absolute path including file name) of the HTML help compiler (hhc.exe). If non-empty, doxygen will try to run the HTML help compiler on the generated index.hhp.

+

The file has to be specified with full path.

+

This tag requires that the tag GENERATE_HTMLHELP is set to YES.

+

GENERATE_CHI

The GENERATE_CHI flag controls if a separate .chi index file is generated (YES) or that it should be included in the master .chm file (NO).

+

The default value is: NO.

+

This tag requires that the tag GENERATE_HTMLHELP is set to YES.

+

CHM_INDEX_ENCODING

The CHM_INDEX_ENCODING is used to encode HtmlHelp index (hhk), content (hhc) and project file content.

+

This tag requires that the tag GENERATE_HTMLHELP is set to YES.

+

BINARY_TOC

The BINARY_TOC flag controls whether a binary table of contents is generated (YES) or a normal table of contents (NO) in the .chm file. Furthermore it enables the Previous and Next buttons.

+

The default value is: NO.

+

This tag requires that the tag GENERATE_HTMLHELP is set to YES.

+

TOC_EXPAND

The TOC_EXPAND flag can be set to YES to add extra items for group members to the table of contents of the HTML help documentation and to the tree view.

+

The default value is: NO.

+

This tag requires that the tag GENERATE_HTMLHELP is set to YES.

+

GENERATE_QHP

If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help (.qch) of the generated HTML documentation.

+

The default value is: NO.

+

This tag requires that the tag GENERATE_HTML is set to YES.

+

QCH_FILE

If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify the file name of the resulting .qch file. The path specified is relative to the HTML output folder.

+

This tag requires that the tag GENERATE_QHP is set to YES.

+

QHP_NAMESPACE

The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help Project output. For more information please see Qt Help Project / Namespace.

+

The default value is: org.doxygen.Project.

+

This tag requires that the tag GENERATE_QHP is set to YES.

+

QHP_VIRTUAL_FOLDER

The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt Help Project output. For more information please see Qt Help Project / Virtual Folders.

+

The default value is: doc.

+

This tag requires that the tag GENERATE_QHP is set to YES.

+

QHP_CUST_FILTER_NAME

If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom filter to add. For more information please see Qt Help Project / Custom Filters.

+

This tag requires that the tag GENERATE_QHP is set to YES.

+

QHP_CUST_FILTER_ATTRS

The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the custom filter to add. For more information please see Qt Help Project / Custom Filters.

+

This tag requires that the tag GENERATE_QHP is set to YES.

+

QHP_SECT_FILTER_ATTRS

The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this project's filter section matches. Qt Help Project / Filter Attributes.

+

This tag requires that the tag GENERATE_QHP is set to YES.

+

QHG_LOCATION

The QHG_LOCATION tag can be used to specify the location of Qt's qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the generated .qhp file.

+

This tag requires that the tag GENERATE_QHP is set to YES.

+

GENERATE_ECLIPSEHELP

If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be generated, together with the HTML files, they form an Eclipse help plugin.

+

To install this plugin and make it available under the help contents menu in Eclipse, the contents of the directory containing the HTML and XML files needs to be copied into the plugins directory of eclipse. The name of the directory within the plugins directory should be the same as the ECLIPSE_DOC_ID value.

+

After copying Eclipse needs to be restarted before the help appears.

+

The default value is: NO.

+

This tag requires that the tag GENERATE_HTML is set to YES.

+

ECLIPSE_DOC_ID

A unique identifier for the Eclipse help plugin. When installing the plugin the directory name containing the HTML and XML files should also have this name. Each documentation set should have its own identifier.

+

The default value is: org.doxygen.Project.

+

This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.

+

DISABLE_INDEX

If you want full control over the layout of the generated HTML pages it might be necessary to disable the index and replace it with your own. The DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top of each HTML page. A value of NO enables the index and the value YES disables it. Since the tabs in the index contain the same information as the navigation tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.

+

The default value is: NO.

+

This tag requires that the tag GENERATE_HTML is set to YES.

+

GENERATE_TREEVIEW

The GENERATE_TREEVIEW tag is used to specify whether a tree-like index structure should be generated to display hierarchical information. If the tag value is set to YES, a side panel will be generated containing a tree-like index structure (just like the one that is generated for HTML Help). For this to work a browser that supports JavaScript, DHTML, CSS and frames is required (i.e. any modern browser). Windows users are probably better off using the HTML help feature.

+

Via custom style sheets (see HTML_EXTRA_STYLESHEET) one can further fine-tune the look of the index. As an example, the default style sheet generated by doxygen has an example that shows how to put an image at the root of the tree instead of the PROJECT_NAME.

+

Since the tree basically has the same information as the tab index, you could consider setting DISABLE_INDEX to YES when enabling this option.

+

The default value is: NO.

+

This tag requires that the tag GENERATE_HTML is set to YES.

+

ENUM_VALUES_PER_LINE

The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that doxygen will group on one line in the generated HTML documentation.
+Note that a value of 0 will completely suppress the enum values from appearing in the overview section.

+

Minimum value: 0, maximum value: 20, default value: 4.

+

This tag requires that the tag GENERATE_HTML is set to YES.

+

TREEVIEW_WIDTH

If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used to set the initial width (in pixels) of the frame in which the tree is shown.

+

Minimum value: 0, maximum value: 1500, default value: 250.

+

This tag requires that the tag GENERATE_HTML is set to YES.

+

EXT_LINKS_IN_WINDOW

If the EXT_LINKS_IN_WINDOW option is set to YES, doxygen will open links to external symbols imported via tag files in a separate window.

+

The default value is: NO.

+

This tag requires that the tag GENERATE_HTML is set to YES.

+

FORMULA_FONTSIZE

Use this tag to change the font size of $\mbox{\LaTeX}$ formulas included as images in the HTML documentation. When you change the font size after a successful doxygen run you need to manually remove any form_*.png images from the HTML output directory to force them to be regenerated.

+

Minimum value: 8, maximum value: 50, default value: 10.

+

This tag requires that the tag GENERATE_HTML is set to YES.

+

FORMULA_TRANSPARENT

Use the FORMULA_TRANPARENT tag to determine whether or not the images generated for formulas are transparent PNGs. Transparent PNGs are not supported properly for IE 6.0, but are supported on all modern browsers.
+Note that when changing this option you need to delete any form_*.png files in the HTML output directory before the changes have effect.

+

The default value is: YES.

+

This tag requires that the tag GENERATE_HTML is set to YES.

+

USE_MATHJAX

Enable the USE_MATHJAX option to render $\mbox{\LaTeX}$ formulas using MathJax (see http://www.mathjax.org) which uses client side Javascript for the rendering instead of using pre-rendered bitmaps. Use this if you do not have $\mbox{\LaTeX}$ installed or if you want to formulas look prettier in the HTML output. When enabled you may also need to install MathJax separately and configure the path to it using the MATHJAX_RELPATH option.

+

The default value is: NO.

+

This tag requires that the tag GENERATE_HTML is set to YES.

+

MATHJAX_FORMAT

When MathJax is enabled you can set the default output format to be used for the MathJax output. See the MathJax site for more details.

+

Possible values are: HTML-CSS (which is slower, but has the best compatibility), NativeMML (i.e. MathML) and SVG.

+

The default value is: HTML-CSS.

+

This tag requires that the tag USE_MATHJAX is set to YES.

+

MATHJAX_RELPATH

When MathJax is enabled you need to specify the location relative to the HTML output directory using the MATHJAX_RELPATH option. The destination directory should contain the MathJax.js script. For instance, if the mathjax directory is located at the same level as the HTML output directory, then MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax Content Delivery Network so you can quickly see the result without installing MathJax. However, it is strongly recommended to install a local copy of MathJax from http://www.mathjax.org before deployment.

+

The default value is: http://cdn.mathjax.org/mathjax/latest.

+

This tag requires that the tag USE_MATHJAX is set to YES.

+

MATHJAX_EXTENSIONS

The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax extension names that should be enabled during MathJax rendering. For example

MATHJAX_EXTENSIONS     = TeX/AMSmath TeX/AMSsymbols
+

This tag requires that the tag USE_MATHJAX is set to YES.

+

MATHJAX_CODEFILE

The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces of code that will be used on startup of the MathJax code. See the MathJax site for more details. As an example to disable the "Math Renderer" menu item in the "Math + Settings" menu of MathJax:

MATHJAX_CODEFILE = disableRenderer.js
+

with in the file disableRenderer.js:

  MathJax.Hub.Config({
+   menuSettings: {
+    showRenderer: false,
+   } 
+  });
+

This tag requires that the tag USE_MATHJAX is set to YES.

+

SEARCHENGINE

When the SEARCHENGINE tag is enabled doxygen will generate a search box for the HTML output. The underlying search engine uses javascript and DHTML and should work on any modern browser. Note that when using HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET) there is already a search function so this one should typically be disabled. For large projects the javascript based search engine can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.

+

It is possible to search using the keyboard; to jump to the search box use <access key> + S (what the <access key> is depends on the OS and browser, but it is typically <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down key> to jump into the search results window, the results can be navigated using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel the search. The filter options can be selected when the cursor is inside the search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys> to select a filter and <Enter> or <escape> to activate or cancel the filter option.

+

The default value is: YES.

+

This tag requires that the tag GENERATE_HTML is set to YES.

+

SERVER_BASED_SEARCH

When the SERVER_BASED_SEARCH tag is enabled the search engine will be implemented using a web server instead of a web client using Javascript.

+

There are two flavors of web server based searching depending on the EXTERNAL_SEARCH setting. When disabled, doxygen will generate a PHP script for searching and an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing and searching needs to be provided by external tools. See the section External Indexing and Searching for details.

+

The default value is: NO.

+

This tag requires that the tag SEARCHENGINE is set to YES.

+

EXTERNAL_SEARCH

When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP script for searching. Instead the search results are written to an XML file which needs to be processed by an external indexer. Doxygen will invoke an external search engine pointed to by the SEARCHENGINE_URL option to obtain the search results.
+Doxygen ships with an example indexer (doxyindexer) and search engine (doxysearch.cgi) which are based on the open source search engine library Xapian.
+See the section External Indexing and Searching for details.

+

The default value is: NO.

+

This tag requires that the tag SEARCHENGINE is set to YES.

+

SEARCHENGINE_URL

The SEARCHENGINE_URL should point to a search engine hosted by a web server which will return the search results when EXTERNAL_SEARCH is enabled.
+Doxygen ships with an example indexer (doxyindexer) and search engine (doxysearch.cgi) which are based on the open source search engine library Xapian. See the section External Indexing and Searching for details.

+

This tag requires that the tag SEARCHENGINE is set to YES.

+

SEARCHDATA_FILE

When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed search data is written to a file for indexing by an external tool. With the SEARCHDATA_FILE tag the name of this file can be specified.

+

The default file is: searchdata.xml.

+

This tag requires that the tag SEARCHENGINE is set to YES.

+

EXTERNAL_SEARCH_ID

When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple projects and redirect the results back to the right project.

+

This tag requires that the tag SEARCHENGINE is set to YES.

+

EXTRA_SEARCH_MAPPINGS

The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen projects other than the one defined by this configuration file, but that are all added to the same external search index. Each project needs to have a unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of to a relative location where the documentation can be found.

+

The format is:

EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ... 
+

This tag requires that the tag SEARCHENGINE is set to YES.

+

+Configuration options related to the LaTeX output

+

GENERATE_LATEX

If the GENERATE_LATEX tag is set to YES, doxygen will generate $\mbox{\LaTeX}$ output.

+

The default value is: YES.

+

LATEX_OUTPUT

The LATEX_OUTPUT tag is used to specify where the $\mbox{\LaTeX}$ docs will be put. If a relative path is entered the value of OUTPUT_DIRECTORY will be put in front of it.

+

The default directory is: latex.

+

This tag requires that the tag GENERATE_LATEX is set to YES.

+

LATEX_CMD_NAME

The LATEX_CMD_NAME tag can be used to specify the $\mbox{\LaTeX}$ command name to be invoked.
+Note that when enabling USE_PDFLATEX this option is only used for generating bitmaps for formulas in the HTML output, but not in the Makefile that is written to the output directory.

+

The default file is: latex.

+

This tag requires that the tag GENERATE_LATEX is set to YES.

+

MAKEINDEX_CMD_NAME

The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate index for $\mbox{\LaTeX}$ .

+

The default file is: makeindex.

+

This tag requires that the tag GENERATE_LATEX is set to YES.

+

COMPACT_LATEX

If the COMPACT_LATEX tag is set to YES, doxygen generates more compact $\mbox{\LaTeX}$ documents. This may be useful for small projects and may help to save some trees in general.

+

The default value is: NO.

+

This tag requires that the tag GENERATE_LATEX is set to YES.

+

PAPER_TYPE

The PAPER_TYPE tag can be used to set the paper type that is used by the printer.

+

Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x 14 inches) and executive (7.25 x 10.5 inches).

+

The default value is: a4.

+

This tag requires that the tag GENERATE_LATEX is set to YES.

+

EXTRA_PACKAGES

The EXTRA_PACKAGES tag can be used to specify one or more $\mbox{\LaTeX}$ package names that should be included in the $\mbox{\LaTeX}$ output. The package can be specified just by its name or with the correct syntax as to be used with the $\mbox{\LaTeX}$ \usepackage command.

+

To get the times font for instance you can specify :

  EXTRA_PACKAGES=times
+or 
+  EXTRA_PACKAGES={times}
+

To use the option intlimits with the amsmath package you can specify:

   EXTRA_PACKAGES=[intlimits]{amsmath}
+

If left blank no extra packages will be included.

+

This tag requires that the tag GENERATE_LATEX is set to YES.

+

LATEX_HEADER

The LATEX_HEADER tag can be used to specify a personal $\mbox{\LaTeX}$ header for the generated $\mbox{\LaTeX}$ document. The header should contain everything until the first chapter.

+

If it is left blank doxygen will generate a standard header. See section Doxygen usage for information on how to let doxygen write the default header to a separate file.

+

+Note: Only use a user-defined header if you know what you are doing!

+

The following commands have a special meaning inside the header: $title, $datetime, $date, $doxygenversion, $projectname, $projectnumber, $projectbrief, $projectlogo. Doxygen will replace $title with the empty string, for the replacement values of the other commands the user is referred to HTML_HEADER.

+

This tag requires that the tag GENERATE_LATEX is set to YES.

+

LATEX_FOOTER

The LATEX_FOOTER tag can be used to specify a personal $\mbox{\LaTeX}$ footer for the generated $\mbox{\LaTeX}$ document. The footer should contain everything after the last chapter. If it is left blank doxygen will generate a standard footer. See LATEX_HEADER for more information on how to generate a default footer and what special commands can be used inside the footer.

+

+Note: Only use a user-defined footer if you know what you are doing!

+

This tag requires that the tag GENERATE_LATEX is set to YES.

+

LATEX_EXTRA_STYLESHEET

The LATEX_EXTRA_STYLESHEET tag can be used to specify additional user-defined $\mbox{\LaTeX}$ style sheets that are included after the standard style sheets created by doxygen. Using this option one can overrule certain style aspects. Doxygen will copy the style sheet files to the output directory.

Note: The order of the extra style sheet files is of importance (e.g. the last style sheet in the list overrules the setting of the previous ones in the list).

+This tag requires that the tag GENERATE_LATEX is set to YES.

LATEX_EXTRA_FILES

The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or other source files which should be copied to the LATEX_OUTPUT output directory. Note that the files will be copied as-is; there are no commands or markers available.

+

This tag requires that the tag GENERATE_LATEX is set to YES.

+

PDF_HYPERLINKS

If the PDF_HYPERLINKS tag is set to YES, the $\mbox{\LaTeX}$ that is generated is prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will contain links (just like the HTML output) instead of page references. This makes the output suitable for online browsing using a PDF viewer.

+

The default value is: YES.

+

This tag requires that the tag GENERATE_LATEX is set to YES.

+

USE_PDFLATEX

If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate the PDF file directly from the $\mbox{\LaTeX}$ files. Set this option to YES, to get a higher quality PDF documentation.

+

The default value is: YES.

+

This tag requires that the tag GENERATE_LATEX is set to YES.

+

LATEX_BATCHMODE

If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode command to the generated $\mbox{\LaTeX}$ files. This will instruct $\mbox{\LaTeX}$ to keep running if errors occur, instead of asking the user for help. This option is also used when generating formulas in HTML.

+

The default value is: NO.

+

This tag requires that the tag GENERATE_LATEX is set to YES.

+

LATEX_HIDE_INDICES

If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the index chapters (such as File Index, Compound Index, etc.) in the output.

+

The default value is: NO.

+

This tag requires that the tag GENERATE_LATEX is set to YES.

+

LATEX_SOURCE_CODE

If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source code with syntax highlighting in the $\mbox{\LaTeX}$ output.
+Note that which sources are shown also depends on other settings such as SOURCE_BROWSER.

+

The default value is: NO.

+

This tag requires that the tag GENERATE_LATEX is set to YES.

+

LATEX_BIB_STYLE

The LATEX_BIB_STYLE tag can be used to specify the style to use for the bibliography, e.g. plainnat, or ieeetr. See http://en.wikipedia.org/wiki/BibTeX and \cite for more info.

+

The default value is: plain.

+

This tag requires that the tag GENERATE_LATEX is set to YES.

+

LATEX_TIMESTAMP

If the LATEX_TIMESTAMP tag is set to YES then the footer of each generated page will contain the date and time when the page was generated. Setting this to NO can help when comparing the output of multiple runs.

+

The default value is: NO.

+

This tag requires that the tag GENERATE_LATEX is set to YES.

+

+Configuration options related to the RTF output

+

GENERATE_RTF

If the GENERATE_RTF tag is set to YES, doxygen will generate RTF output. The RTF output is optimized for Word 97 and may not look too pretty with other RTF readers/editors.

+

The default value is: NO.

+

RTF_OUTPUT

The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a relative path is entered the value of OUTPUT_DIRECTORY will be put in front of it.

+

The default directory is: rtf.

+

This tag requires that the tag GENERATE_RTF is set to YES.

+

COMPACT_RTF

If the COMPACT_RTF tag is set to YES, doxygen generates more compact RTF documents. This may be useful for small projects and may help to save some trees in general.

+

The default value is: NO.

+

This tag requires that the tag GENERATE_RTF is set to YES.

+

RTF_HYPERLINKS

If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will contain hyperlink fields. The RTF file will contain links (just like the HTML output) instead of page references. This makes the output suitable for online browsing using Word or some other Word compatible readers that support those fields.

+

+Note: WordPad (write) and others do not support links.

+

The default value is: NO.

+

This tag requires that the tag GENERATE_RTF is set to YES.

+

RTF_STYLESHEET_FILE

Load stylesheet definitions from file. Syntax is similar to doxygen's config file, i.e. a series of assignments. You only have to provide replacements, missing definitions are set to their default value.
+ See also section Doxygen usage for information on how to generate the default style sheet that doxygen normally uses.

+

This tag requires that the tag GENERATE_RTF is set to YES.

+

RTF_EXTENSIONS_FILE

Set optional variables used in the generation of an RTF document. Syntax is similar to doxygen's config file. A template extensions file can be generated using doxygen -e rtf extensionFile.

+

This tag requires that the tag GENERATE_RTF is set to YES.

+

RTF_SOURCE_CODE

If the RTF_SOURCE_CODE tag is set to YES then doxygen will include source code with syntax highlighting in the RTF output.
+Note that which sources are shown also depends on other settings such as SOURCE_BROWSER.

+

The default value is: NO.

+

This tag requires that the tag GENERATE_RTF is set to YES.

+

+Configuration options related to the man page output

+

GENERATE_MAN

If the GENERATE_MAN tag is set to YES, doxygen will generate man pages for classes and files.

+

The default value is: NO.

+

MAN_OUTPUT

The MAN_OUTPUT tag is used to specify where the man pages will be put. If a relative path is entered the value of OUTPUT_DIRECTORY will be put in front of it. A directory man3 will be created inside the directory specified by MAN_OUTPUT.

+

The default directory is: man.

+

This tag requires that the tag GENERATE_MAN is set to YES.

+

MAN_EXTENSION

The MAN_EXTENSION tag determines the extension that is added to the generated man pages. In case the manual section does not start with a number, the number 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is optional.

+

The default value is: .3.

+

This tag requires that the tag GENERATE_MAN is set to YES.

+

MAN_SUBDIR

The MAN_SUBDIR tag determines the name of the directory created within MAN_OUTPUT in which the man pages are placed. If defaults to man followed by MAN_EXTENSION with the initial . removed.

+

This tag requires that the tag GENERATE_MAN is set to YES.

+

MAN_LINKS

If the MAN_LINKS tag is set to YES and doxygen generates man output, then it will generate one additional man file for each entity documented in the real man page(s). These additional files only source the real man page, but without them the man command would be unable to find the correct page.

+

The default value is: NO.

+

This tag requires that the tag GENERATE_MAN is set to YES.

+

+Configuration options related to the XML output

+

GENERATE_XML

If the GENERATE_XML tag is set to YES, doxygen will generate an XML file that captures the structure of the code including all documentation.

+

The default value is: NO.

+

XML_OUTPUT

The XML_OUTPUT tag is used to specify where the XML pages will be put. If a relative path is entered the value of OUTPUT_DIRECTORY will be put in front of it.

+

The default directory is: xml.

+

This tag requires that the tag GENERATE_XML is set to YES.

+

XML_PROGRAMLISTING

If the XML_PROGRAMLISTING tag is set to YES, doxygen will dump the program listings (including syntax highlighting and cross-referencing information) to the XML output. Note that enabling this will significantly increase the size of the XML output.

+

The default value is: YES.

+

This tag requires that the tag GENERATE_XML is set to YES.

+

+Configuration options related to the DOCBOOK output

+

GENERATE_DOCBOOK

If the GENERATE_DOCBOOK tag is set to YES, doxygen will generate Docbook files that can be used to generate PDF.

+

The default value is: NO.

+

DOCBOOK_OUTPUT

The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put. If a relative path is entered the value of OUTPUT_DIRECTORY will be put in front of it.

+

The default directory is: docbook.

+

This tag requires that the tag GENERATE_DOCBOOK is set to YES.

+

DOCBOOK_PROGRAMLISTING

If the DOCBOOK_PROGRAMLISTING tag is set to YES, doxygen will include the program listings (including syntax highlighting and cross-referencing information) to the DOCBOOK output. Note that enabling this will significantly increase the size of the DOCBOOK output.

+

The default value is: NO.

+

This tag requires that the tag GENERATE_DOCBOOK is set to YES.

+

+Configuration options for the AutoGen Definitions output

+

GENERATE_AUTOGEN_DEF

If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an AutoGen Definitions (see http://autogen.sf.net) file that captures the structure of the code including all documentation. Note that this feature is still experimental and incomplete at the moment.

+

The default value is: NO.

+

+Configuration options related to the Perl module output

+

GENERATE_PERLMOD

If the GENERATE_PERLMOD tag is set to YES, doxygen will generate a Perl module file that captures the structure of the code including all documentation.
+Note that this feature is still experimental and incomplete at the moment.

+

The default value is: NO.

+

PERLMOD_LATEX

If the PERLMOD_LATEX tag is set to YES, doxygen will generate the necessary Makefile rules, Perl scripts and $\mbox{\LaTeX}$ code to be able to generate PDF and DVI output from the Perl module output.

+

The default value is: NO.

+

This tag requires that the tag GENERATE_PERLMOD is set to YES.

+

PERLMOD_PRETTY

If the PERLMOD_PRETTY tag is set to YES, the Perl module output will be nicely formatted so it can be parsed by a human reader. This is useful if you want to understand what is going on. On the other hand, if this tag is set to NO, the size of the Perl module output will be much smaller and Perl will parse it just the same.

+

The default value is: YES.

+

This tag requires that the tag GENERATE_PERLMOD is set to YES.

+

PERLMOD_MAKEVAR_PREFIX

The names of the make variables in the generated doxyrules.make file are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful so different doxyrules.make files included by the same Makefile don't overwrite each other's variables.

+

This tag requires that the tag GENERATE_PERLMOD is set to YES.

+

+Configuration options related to the preprocessor

+

ENABLE_PREPROCESSING

If the ENABLE_PREPROCESSING tag is set to YES, doxygen will evaluate all C-preprocessor directives found in the sources and include files.

+

The default value is: YES.

+

MACRO_EXPANSION

If the MACRO_EXPANSION tag is set to YES, doxygen will expand all macro names in the source code. If set to NO, only conditional compilation will be performed. Macro expansion can be done in a controlled way by setting EXPAND_ONLY_PREDEF to YES.

+

The default value is: NO.

+

This tag requires that the tag ENABLE_PREPROCESSING is set to YES.

+

EXPAND_ONLY_PREDEF

If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then the macro expansion is limited to the macros specified with the PREDEFINED and EXPAND_AS_DEFINED tags.

+

The default value is: NO.

+

This tag requires that the tag ENABLE_PREPROCESSING is set to YES.

+

SEARCH_INCLUDES

If the SEARCH_INCLUDES tag is set to YES, the include files in the INCLUDE_PATH will be searched if a #include is found.

+

The default value is: YES.

+

This tag requires that the tag ENABLE_PREPROCESSING is set to YES.

+

INCLUDE_PATH

The INCLUDE_PATH tag can be used to specify one or more directories that contain include files that are not input files but should be processed by the preprocessor.

+

This tag requires that the tag SEARCH_INCLUDES is set to YES.

+

INCLUDE_FILE_PATTERNS

You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard patterns (like *.h and *.hpp) to filter out the header-files in the directories. If left blank, the patterns specified with FILE_PATTERNS will be used.

+

This tag requires that the tag ENABLE_PREPROCESSING is set to YES.

+

PREDEFINED

The PREDEFINED tag can be used to specify one or more macro names that are defined before the preprocessor is started (similar to the -D option of e.g. gcc). The argument of the tag is a list of macros of the form: name or name=definition (no spaces). If the definition and the "=" are omitted, "=1" is assumed. To prevent a macro definition from being undefined via #undef or recursively expanded use the := operator instead of the = operator.

+

This tag requires that the tag ENABLE_PREPROCESSING is set to YES.

+

EXPAND_AS_DEFINED

If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this tag can be used to specify a list of macro names that should be expanded. The macro definition that is found in the sources will be used. Use the PREDEFINED tag if you want to use a different macro definition that overrules the definition found in the source code.

+

This tag requires that the tag ENABLE_PREPROCESSING is set to YES.

+

SKIP_FUNCTION_MACROS

If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will remove all references to function-like macros that are alone on a line, have an all uppercase name, and do not end with a semicolon. Such function macros are typically used for boiler-plate code, and will confuse the parser if not removed.

+

The default value is: YES.

+

This tag requires that the tag ENABLE_PREPROCESSING is set to YES.

+

+Configuration options related to external references

+

TAGFILES

The TAGFILES tag can be used to specify one or more tag files.

+

For each tag file the location of the external documentation should be added. The format of a tag file without this location is as follows:

  TAGFILES = file1 file2 ... 
+

Adding location for the tag files is done as follows:

  TAGFILES = file1=loc1 "file2 = loc2" ... 
+

where loc1 and loc2 can be relative or absolute paths or URLs. See the section Linking to external documentation for more information about the use of tag files.

+

Note: Each tag file must have a unique name (where the name does NOT include the path). If a tag file is not located in the directory in which doxygen is run, you must also specify the path to the tagfile here.

+

GENERATE_TAGFILE

When a file name is specified after GENERATE_TAGFILE, doxygen will create a tag file that is based on the input files it reads. See section Linking to external documentation for more information about the usage of tag files.

+

ALLEXTERNALS

If the ALLEXTERNALS tag is set to YES, all external class will be listed in the class index. If set to NO, only the inherited external classes will be listed.

+

The default value is: NO.

+

EXTERNAL_GROUPS

If the EXTERNAL_GROUPS tag is set to YES, all external groups will be listed in the modules index. If set to NO, only the current project's groups will be listed.

+

The default value is: YES.

+

EXTERNAL_PAGES

If the EXTERNAL_PAGES tag is set to YES, all external pages will be listed in the related pages index. If set to NO, only the current project's pages will be listed.

+

The default value is: YES.

+

PERL_PATH

The PERL_PATH should be the absolute path and name of the perl script interpreter (i.e. the result of 'which perl').

+

The default file (with absolute path) is: /usr/bin/perl.

+

+Configuration options related to the dot tool

+

CLASS_DIAGRAMS

If the CLASS_DIAGRAMS tag is set to YES, doxygen will generate a class diagram (in HTML and $\mbox{\LaTeX}$ ) for classes with base or super classes. Setting the tag to NO turns the diagrams off. Note that this option also works with HAVE_DOT disabled, but it is recommended to install and use dot, since it yields more powerful graphs.

+

The default value is: YES.

+

MSCGEN_PATH

You can define message sequence charts within doxygen comments using the \msc command. Doxygen will then run the mscgen tool) to produce the chart and insert it in the documentation. The MSCGEN_PATH tag allows you to specify the directory where the mscgen tool resides. If left empty the tool is assumed to be found in the default search path.

+

DIA_PATH

You can include diagrams made with dia in doxygen documentation. Doxygen will then run dia to produce the diagram and insert it in the documentation. The DIA_PATH tag allows you to specify the directory where the dia binary resides. If left empty dia is assumed to be found in the default search path.

+

HIDE_UNDOC_RELATIONS

If set to YES the inheritance and collaboration graphs will hide inheritance and usage relations if the target is undocumented or is not a class.

+

The default value is: YES.

+

HAVE_DOT

If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is available from the path. This tool is part of Graphviz, a graph visualization toolkit from AT&T and Lucent Bell Labs. The other options in this section have no effect if this option is set to NO

+

The default value is: NO.

+

DOT_NUM_THREADS

The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed to run in parallel. When set to 0 doxygen will base this on the number of processors available in the system. You can set it explicitly to a value larger than 0 to get control over the balance between CPU load and processing speed.

+

Minimum value: 0, maximum value: 32, default value: 0.

+

This tag requires that the tag HAVE_DOT is set to YES.

+

DOT_FONTNAME

When you want a differently looking font in the dot files that doxygen generates you can specify the font name using DOT_FONTNAME. You need to make sure dot is able to find the font, which can be done by putting it in a standard location or by setting the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory containing the font.

+

The default value is: Helvetica.

+

This tag requires that the tag HAVE_DOT is set to YES.

+

DOT_FONTSIZE

The DOT_FONTSIZE tag can be used to set the size (in points) of the font of dot graphs.

+

Minimum value: 4, maximum value: 24, default value: 10.

+

This tag requires that the tag HAVE_DOT is set to YES.

+

DOT_FONTPATH

By default doxygen will tell dot to use the default font as specified with DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set the path where dot can find it using this tag.

+

This tag requires that the tag HAVE_DOT is set to YES.

+

CLASS_GRAPH

If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for each documented class showing the direct and indirect inheritance relations. Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.

+

The default value is: YES.

+

This tag requires that the tag HAVE_DOT is set to YES.

+

COLLABORATION_GRAPH

If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a graph for each documented class showing the direct and indirect implementation dependencies (inheritance, containment, and class references variables) of the class with other documented classes.

+

The default value is: YES.

+

This tag requires that the tag HAVE_DOT is set to YES.

+

GROUP_GRAPHS

If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for groups, showing the direct groups dependencies.

+

The default value is: YES.

+

This tag requires that the tag HAVE_DOT is set to YES.

+

UML_LOOK

If the UML_LOOK tag is set to YES, doxygen will generate inheritance and collaboration diagrams in a style similar to the OMG's Unified Modeling Language.

+

The default value is: NO.

+

This tag requires that the tag HAVE_DOT is set to YES.

+

UML_LIMIT_NUM_FIELDS

If the UML_LOOK tag is enabled, the fields and methods are shown inside the class node. If there are many fields or methods and many nodes the graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the number of items for each type to make the size more manageable. Set this to 0 for no limit. Note that the threshold may be exceeded by 50% before the limit is enforced. So when you set the threshold to 10, up to 15 fields may appear, but if the number exceeds 15, the total amount of fields shown is limited to 10.

+

Minimum value: 0, maximum value: 100, default value: 10.

+

This tag requires that the tag HAVE_DOT is set to YES.

+

TEMPLATE_RELATIONS

If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and collaboration graphs will show the relations between templates and their instances.

+

The default value is: NO.

+

This tag requires that the tag HAVE_DOT is set to YES.

+

INCLUDE_GRAPH

If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to YES then doxygen will generate a graph for each documented file showing the direct and indirect include dependencies of the file with other documented files.

+

The default value is: YES.

+

This tag requires that the tag HAVE_DOT is set to YES.

+

INCLUDED_BY_GRAPH

If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to YES then doxygen will generate a graph for each documented file showing the direct and indirect include dependencies of the file with other documented files.

+

The default value is: YES.

+

This tag requires that the tag HAVE_DOT is set to YES.

+

CALL_GRAPH

If the CALL_GRAPH tag is set to YES then doxygen will generate a call dependency graph for every global function or class method.
+Note that enabling this option will significantly increase the time of a run. So in most cases it will be better to enable call graphs for selected functions only using the \callgraph command. Disabling a call graph can be accomplished by means of the command \hidecallgraph.

+

The default value is: NO.

+

This tag requires that the tag HAVE_DOT is set to YES.

+

CALLER_GRAPH

If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller dependency graph for every global function or class method.
+Note that enabling this option will significantly increase the time of a run. So in most cases it will be better to enable caller graphs for selected functions only using the \callergraph command. Disabling a caller graph can be accomplished by means of the command \hidecallergraph.

+

The default value is: NO.

+

This tag requires that the tag HAVE_DOT is set to YES.

+

GRAPHICAL_HIERARCHY

If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical hierarchy of all classes instead of a textual one.

+

The default value is: YES.

+

This tag requires that the tag HAVE_DOT is set to YES.

+

DIRECTORY_GRAPH

If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the dependencies a directory has on other directories in a graphical way. The dependency relations are determined by the #include relations between the files in the directories.

+

The default value is: YES.

+

This tag requires that the tag HAVE_DOT is set to YES.

+

DOT_IMAGE_FORMAT

The DOT_IMAGE_FORMAT tag can be used to set the image format of the images generated by dot. For an explanation of the image formats see the section output formats in the documentation of the dot tool (Graphviz).

Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order to make the SVG files visible in IE 9+ (other browsers do not have this requirement).

+

Possible values are: png, jpg, gif, svg, png:gd, png:gd:gd, png:cairo, png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus and png:gdiplus:gdiplus.

+

The default value is: png.

+

This tag requires that the tag HAVE_DOT is set to YES.

+

INTERACTIVE_SVG

If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to enable generation of interactive SVG images that allow zooming and panning.
+Note that this requires a modern browser other than Internet Explorer. Tested and working are Firefox, Chrome, Safari, and Opera.

Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make the SVG files visible. Older versions of IE do not have SVG support.

+

The default value is: NO.

+

This tag requires that the tag HAVE_DOT is set to YES.

+

DOT_PATH

The DOT_PATH tag can be used to specify the path where the dot tool can be found. If left blank, it is assumed the dot tool can be found in the path.

+

This tag requires that the tag HAVE_DOT is set to YES.

+

DOTFILE_DIRS

The DOTFILE_DIRS tag can be used to specify one or more directories that contain dot files that are included in the documentation (see the \dotfile command).

+

This tag requires that the tag HAVE_DOT is set to YES.

+

MSCFILE_DIRS

The MSCFILE_DIRS tag can be used to specify one or more directories that contain msc files that are included in the documentation (see the \mscfile command).

+

DIAFILE_DIRS

The DIAFILE_DIRS tag can be used to specify one or more directories that contain dia files that are included in the documentation (see the \diafile command).

+

PLANTUML_JAR_PATH

When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the path where java can find the plantuml.jar file. If left blank, it is assumed PlantUML is not used or called during a preprocessing step. Doxygen will generate a warning when it encounters a \startuml command in this case and will not generate output for the diagram.

+

PLANTUML_INCLUDE_PATH

When using plantuml, the specified paths are searched for files specified by the !include statement in a plantuml block.

+

DOT_GRAPH_MAX_NODES

The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes that will be shown in the graph. If the number of nodes in a graph becomes larger than this value, doxygen will truncate the graph, which is visualized by representing a node as a red box. Note that doxygen if the number of direct children of the root node in a graph is already larger than DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.

+

Minimum value: 0, maximum value: 10000, default value: 50.

+

This tag requires that the tag HAVE_DOT is set to YES.

+

MAX_DOT_GRAPH_DEPTH

The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs generated by dot. A depth value of 3 means that only nodes reachable from the root by following a path via at most 3 edges will be shown. Nodes that lay further from the root node will be omitted. Note that setting this option to 1 or 2 may greatly reduce the computation time needed for large code bases. Also note that the size of a graph can be further restricted by DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.

+

Minimum value: 0, maximum value: 1000, default value: 0.

+

This tag requires that the tag HAVE_DOT is set to YES.

+

DOT_TRANSPARENT

Set the DOT_TRANSPARENT tag to YES to generate images with a transparent background. This is disabled by default, because dot on Windows does not seem to support this out of the box.
+ Warning: Depending on the platform used, enabling this option may lead to badly anti-aliased labels on the edges of a graph (i.e. they become hard to read).

+

The default value is: NO.

+

This tag requires that the tag HAVE_DOT is set to YES.

+

DOT_MULTI_TARGETS

Set the DOT_MULTI_TARGETS tag to YES to allow dot to generate multiple output files in one run (i.e. multiple -o and -T options on the command line). This makes dot run faster, but since only newer versions of dot (>1.8.10) support this, this feature is disabled by default.

+

The default value is: NO.

+

This tag requires that the tag HAVE_DOT is set to YES.

+

GENERATE_LEGEND

If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page explaining the meaning of the various boxes and arrows in the dot generated graphs.

+

The default value is: YES.

+

This tag requires that the tag HAVE_DOT is set to YES.

+

DOT_CLEANUP

If the DOT_CLEANUP tag is set to YES, doxygen will remove the intermediate dot files that are used to generate the various graphs.

+

The default value is: YES.

+

This tag requires that the tag HAVE_DOT is set to YES.

+

+Examples

+

Suppose you have a simple project consisting of two files: a source file example.cc and a header file example.h. Then a minimal configuration file is as simple as:

INPUT            = example.cc example.h
+

Assuming the example makes use of Qt classes and perl is located in /usr/bin, a more realistic configuration file would be:

PROJECT_NAME     = Example
+INPUT            = example.cc example.h
+WARNINGS         = YES
+TAGFILES         = qt.tag
+PERL_PATH        = /usr/local/bin/perl
+SEARCHENGINE     = NO
+

To generate the documentation for the QdbtTabular package I have used the following configuration file:

PROJECT_NAME     = QdbtTabular
+OUTPUT_DIRECTORY = html
+WARNINGS         = YES
+INPUT            = examples/examples.doc src
+FILE_PATTERNS    = *.cc *.h
+INCLUDE_PATH     = examples
+TAGFILES         = qt.tag
+PERL_PATH        = /usr/bin/perl
+SEARCHENGINE     = YES
+

To regenerate the Qt-1.44 documentation from the sources, you could use the following config file:

PROJECT_NAME         = Qt
+OUTPUT_DIRECTORY     = qt_docs
+HIDE_UNDOC_MEMBERS   = YES
+HIDE_UNDOC_CLASSES   = YES
+ENABLE_PREPROCESSING = YES
+MACRO_EXPANSION      = YES
+EXPAND_ONLY_PREDEF   = YES
+SEARCH_INCLUDES      = YES
+FULL_PATH_NAMES      = YES
+STRIP_FROM_PATH      = $(QTDIR)/
+PREDEFINED           = USE_TEMPLATECLASS Q_EXPORT= \
+                       QArrayT:=QArray \
+                       QListT:=QList \
+                       QDictT:=QDict \
+                       QQueueT:=QQueue \
+                       QVectorT:=QVector \
+                       QPtrDictT:=QPtrDict \
+                       QIntDictT:=QIntDict \
+                       QStackT:=QStack \
+                       QDictIteratorT:=QDictIterator \
+                       QListIteratorT:=QListIterator \
+                       QCacheT:=QCache \
+                       QCacheIteratorT:=QCacheIterator \
+                       QIntCacheT:=QIntCache \
+                       QIntCacheIteratorT:=QIntCacheIterator \
+                       QIntDictIteratorT:=QIntDictIterator \
+                       QPtrDictIteratorT:=QPtrDictIterator
+INPUT                = $(QTDIR)/doc \
+                       $(QTDIR)/src/widgets \
+                       $(QTDIR)/src/kernel \
+                       $(QTDIR)/src/dialogs \
+                       $(QTDIR)/src/tools
+FILE_PATTERNS        = *.cpp *.h q*.doc
+INCLUDE_PATH         = $(QTDIR)/include 
+RECURSIVE            = YES
+

For the Qt-2.1 sources I recommend to use the following settings:

PROJECT_NAME          = Qt
+PROJECT_NUMBER        = 2.1
+HIDE_UNDOC_MEMBERS    = YES
+HIDE_UNDOC_CLASSES    = YES
+SOURCE_BROWSER        = YES
+INPUT                 = $(QTDIR)/src
+FILE_PATTERNS         = *.cpp *.h q*.doc
+RECURSIVE             = YES
+EXCLUDE_PATTERNS      = *codec.cpp moc_* */compat/* */3rdparty/*
+ALPHABETICAL_INDEX    = YES
+COLS_IN_ALPHA_INDEX   = 3
+IGNORE_PREFIX         = Q
+ENABLE_PREPROCESSING  = YES
+MACRO_EXPANSION       = YES
+INCLUDE_PATH          = $(QTDIR)/include
+PREDEFINED            = Q_PROPERTY(x)= \
+                        Q_OVERRIDE(x)= \
+                        Q_EXPORT= \
+                        Q_ENUMS(x)= \
+                        "QT_STATIC_CONST=static const " \
+                        _WS_X11_ \
+                        INCLUDE_MENUITEM_DEF
+EXPAND_ONLY_PREDEF    = YES
+EXPAND_AS_DEFINED     = Q_OBJECT_FAKE Q_OBJECT ACTIVATE_SIGNAL_WITH_PARAM \
+                        Q_VARIANT_AS
+

Here doxygen's preprocessor is used to substitute some macro names that are normally substituted by the C preprocessor, but without doing full macro expansion.

+

+Go to the next section or return to the + index. +

+

Table of Contents

+Format

+Project related configuration options

+Build related configuration options

+Configuration options related to warning and progress messages

+Configuration options related to the input files

+Configuration options related to source browsing

+Configuration options related to the alphabetical class index

+Configuration options related to the HTML output

+Configuration options related to the LaTeX output

+Configuration options related to the RTF output

+Configuration options related to the man page output

+Configuration options related to the XML output

+Configuration options related to the DOCBOOK output

+Configuration options for the AutoGen Definitions output

+Configuration options related to the Perl module output

+Configuration options related to the preprocessor

+Configuration options related to external references

+Configuration options related to the dot tool

+Examples