From 44fb17137fe5c0c2f080c560b4c89c002f4a355d Mon Sep 17 00:00:00 2001 From: Lusheng Ji Date: Wed, 21 Mar 2018 16:42:36 -0400 Subject: Fix pom and remove build scripts Making the following changes for the CICD integartion. 1. Remove the mvn-phase* scripts. These scripts are hooks for building non-Java project. This appeasr to be a Java project. Native mvn methods should be enough. 2. Changed artifact ID in pom. LF CICD syste requires group ID and artifact ID matches with the repo path. Otherwise deploying to Nexus will be blocked. 3. Removed duplicated (older version) Jetty servelet dependency calling in pom. Issue-ID: DCAEGEN2-206 Change-Id: I614b9b11419ae091a452ef23fda6a318347ae8e9 Signed-off-by: Lusheng Ji --- mvn-phase-lib.sh | 292 ---------------------------------------------------- mvn-phase-script.sh | 107 ------------------- pom.xml | 66 +----------- 3 files changed, 2 insertions(+), 463 deletions(-) delete mode 100755 mvn-phase-lib.sh delete mode 100755 mvn-phase-script.sh diff --git a/mvn-phase-lib.sh b/mvn-phase-lib.sh deleted file mode 100755 index b7c12a92..00000000 --- a/mvn-phase-lib.sh +++ /dev/null @@ -1,292 +0,0 @@ -#!/usr/bin/env bash - -# ================================================================================ -# Copyright (c) 2017 AT&T Intellectual Property. All rights reserved. -# ================================================================================ -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. -# ============LICENSE_END========================================================= -# -# ECOMP is a trademark and service mark of AT&T Intellectual Property. - - -clean_templated_files() -{ - TEMPLATE_FILES=$(find . -name "*-template") - for F in $TEMPLATE_FILES; do - F2=$(echo "$F" | sed 's/-template$//') - rm -f "$F2" - done -} -clean_tox_files() -{ - TOX_FILES=$(find . -name ".tox") - TOX_FILES="$TOX_FILES $(find . -name 'venv-tox')" - for F in $TOX_FILES; do - rm -rf "$F" - done -} - -expand_templates() -{ - # set up env variables, get ready for template resolution - # NOTE: CCSDK artifacts do not distinguish REALESE vs SNAPSHOTs - export ONAPTEMPLATE_RAWREPOURL_org_onap_ccsdk_platform_plugins_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.ccsdk.platform.plugins" - export ONAPTEMPLATE_RAWREPOURL_org_onap_ccsdk_platform_plugins_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.ccsdk.platform.plugins" - export ONAPTEMPLATE_RAWREPOURL_org_onap_ccsdk_platform_blueprints_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.ccsdk.platform.blueprints" - export ONAPTEMPLATE_RAWREPOURL_org_onap_ccsdk_platform_blueprints_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.ccsdk.platform.blueprints" - - export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2/releases" - export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2/snapshots" - export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_plugins_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.plugins/releases" - export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_plugins_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.plugins/snapshots" - export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_blueprints_releases="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.blueprints/releases" - export ONAPTEMPLATE_RAWREPOURL_org_onap_dcaegen2_platform_blueprints_snapshots="$MVN_RAWREPO_BASEURL_DOWNLOAD/org.onap.dcaegen2.platform.blueprints/snapshots" - - export ONAPTEMPLATE_PYPIURL_org_onap_dcaegen2="${MVN_NEXUSPROXY}/content/sites/pypi" - - export ONAPTEMPLATE_DOCKERREGURL_org_onap_dcaegen2_releases="$MVN_DOCKERREGISTRY_DAILY" - export ONAPTEMPLATE_DOCKERREGURL_org_onap_dcaegen2_snapshots="$MVN_DOCKERREGISTRY_DAILY/snapshots" - - - TEMPLATE_FILES=$(find . -name "*-template") - for F in $TEMPLATE_FILES; do - F2=$(echo "$F" | sed 's/-template$//') - cp "$F" "$F2" - MOD=$(stat --format '%a' "$F") - chmod "$MOD" "$F2" - done - - - TEMPLATES=$(env |grep ONAPTEMPLATE) - if [ -z "$TEMPLATES" ]; then - return 0 - fi - - echo "====> Resolving the following temaplate from environment variables " - echo "[$TEMPLATES]" - SELFFILE=$(echo "$0" | rev | cut -f1 -d '/' | rev) - for TEMPLATE in $TEMPLATES; do - KEY=$(echo "$TEMPLATE" | cut -f1 -d'=') - VALUE=$(echo "$TEMPLATE" | cut -f2 -d'=') - VALUE2=$(echo "$TEMPLATE" | cut -f2 -d'=' |sed 's/\//\\\//g') - set +e - FILES=$(grep -rl "$KEY") - set -e - - if [ -z "$FILES" ]; then - continue - fi - - # assuming FILES is not longer than 2M bytes, the limit for variable value max size on this VM - for F in $FILES; do - if [[ $F == *"$SELFFILE" ]]; then - continue - fi - if [[ "$F" == *-template ]]; then - continue - fi - - echo "======> Resolving template $KEY to value $VALUE for file $F" - sed -i "s/{{[[:space:]]*$KEY[[:space:]]*}}/$VALUE2/g" "$F" - #cat "$F" - done - - #if [ ! -z "$FILES" ]; then - # echo "====> Resolving template $VALUE to value $VALUE" - # #CMD="grep -rl \"$VALUE\" | tr '\n' '\0' | xargs -0 sed -i \"s/{{[[:space:]]*$VALUE[[:space:]]*}}/$VALUE/g\"" - # grep -rl "$KEY" | tr '\n' '\0' | xargs -0 sed -i 's/$KEY/$VALUE2/g' - # #echo $CMD - # #eval $CMD - #fi - done - echo "====> Done template reolving" -} - - -run_tox_test() -{ - set -x - CURDIR=$(pwd) - TOXINIS=$(find . -name "tox.ini") - for TOXINI in "${TOXINIS[@]}"; do - DIR=$(echo "$TOXINI" | rev | cut -f2- -d'/' | rev) - cd "${CURDIR}/${DIR}" - rm -rf ./venv-tox ./.tox - virtualenv ./venv-tox - source ./venv-tox/bin/activate - pip install --upgrade pip - pip install --upgrade tox argparse - pip freeze - tox - deactivate - rm -rf ./venv-tox ./.tox - done -} - -build_wagons() -{ - rm -rf ./*.wgn venv-pkg - - SETUPFILES=$(find . -name "setup.py") - for SETUPFILE in $SETUPFILES; do - PLUGIN_DIR=$(echo "$SETUPFILE" |rev | cut -f 2- -d '/' |rev) - PLUGIN_NAME=$(grep 'name' "$SETUPFILE" | cut -f2 -d'=' | sed 's/[^0-9a-zA-Z\.]*//g') - PLUGIN_VERSION=$(grep 'version' "$SETUPFILE" | cut -f2 -d'=' | sed 's/[^0-9\.]*//g') - - echo "In $PLUGIN_DIR, $PLUGIN_NAME, $PLUGIN_VERSION" - - virtualenv ./venv-pkg - source ./venv-pkg/bin/activate - pip install --upgrade pip - pip install wagon - wagon create --format tar.gz "$PLUGIN_DIR" - deactivate - rm -rf venv-pkg - - PKG_FILE_NAMES=( "${PLUGIN_NAME}-${PLUGIN_VERSION}"*.wgn ) - echo Built package: "${PKG_FILE_NAMES[@]}" - done -} - - -upload_raw_file() -{ - # Extract the username and password to the nexus repo from the settings file - USER=$(xpath -q -e "//servers/server[id='$MVN_RAWREPO_SERVERID']/username/text()" "$SETTINGS_FILE") - PASS=$(xpath -q -e "//servers/server[id='$MVN_RAWREPO_SERVERID']/password/text()" "$SETTINGS_FILE") - NETRC=$(mktemp) - echo "machine $MVN_RAWREPO_HOST login $USER password $PASS" > "$NETRC" - - REPO="$MVN_RAWREPO_BASEURL_UPLOAD" - - OUTPUT_FILE=$1 - EXT=$(echo "$OUTPUT_FILE" | rev |cut -f1 -d '.' |rev) - if [ "$EXT" == 'yaml' ]; then - OUTPUT_FILE_TYPE='text/x-yaml' - elif [ "$EXT" == 'sh' ]; then - OUTPUT_FILE_TYPE='text/x-shellscript' - elif [ "$EXT" == 'gz' ]; then - OUTPUT_FILE_TYPE='application/gzip' - elif [ "$EXT" == 'wgn' ]; then - OUTPUT_FILE_TYPE='application/gzip' - else - OUTPUT_FILE_TYPE='application/octet-stream' - fi - - - if [ "$MVN_DEPLOYMENT_TYPE" == 'SNAPSHOT' ]; then - SEND_TO="${REPO}/${FQDN}/snapshots" - elif [ "$MVN_DEPLOYMENT_TYPE" == 'STAGING' ]; then - SEND_TO="${REPO}/${FQDN}/releases" - else - echo "Unreconfnized deployment type, quit" - exit - fi - if [ ! -z "$MVN_PROJECT_MODULEID" ]; then - SEND_TO="$SEND_TO/$MVN_PROJECT_MODULEID" - fi - - echo "Sending ${OUTPUT_FILE} to Nexus: ${SEND_TO}" - curl -vkn --netrc-file "${NETRC}" --upload-file "${OUTPUT_FILE}" -X PUT -H "Content-Type: $OUTPUT_FILE_TYPE" "${SEND_TO}/${OUTPUT_FILE}-${MVN_PROJECT_VERSION}-${TIMESTAMP}" - curl -vkn --netrc-file "${NETRC}" --upload-file "${OUTPUT_FILE}" -X PUT -H "Content-Type: $OUTPUT_FILE_TYPE" "${SEND_TO}/${OUTPUT_FILE}-${MVN_PROJECT_VERSION}" - curl -vkn --netrc-file "${NETRC}" --upload-file "${OUTPUT_FILE}" -X PUT -H "Content-Type: $OUTPUT_FILE_TYPE" "${SEND_TO}/${OUTPUT_FILE}" -} - - - -upload_wagons_and_type_yamls() -{ - WAGONS=$(ls -1 ./*.wgn) - for WAGON in $WAGONS ; do - WAGON_NAME=$(echo "$WAGON" | cut -f1 -d '-') - WAGON_VERSION=$(echo "$WAGON" | cut -f2 -d '-') - WAGON_TYPEFILE=$(grep -rl "$WAGON_NAME" | grep yaml | head -1) - - upload_raw_file "$WAGON" - upload_raw_file "$WAGON_TYPEFILE" - done -} - -upload_files_of_extension() -{ - FILES=$(ls -1 ./*."$1") - for F in $FILES ; do - upload_raw_file "$F" - done -} - - - -build_and_push_docker() -{ - IMAGENAME="onap/${FQDN}.${MVN_PROJECT_MODULEID}" - IMAGENAME=$(echo "$IMAGENAME" | sed -e 's/_*$//g' -e 's/\.*$//g') - - # use the major and minor version of the MVN artifact version as docker image version - VERSION="${MVN_PROJECT_VERSION//[^0-9.]/}" - VERSION2=$(echo "$VERSION" | cut -f1-2 -d'.') - - LFQI="${IMAGENAME}:${VERSION}-${TIMESTAMP}" - BUILD_PATH="${WORKSPACE}" - # build a docker image - docker build --rm -f "${WORKSPACE}"/Dockerfile -t "${LFQI}" "${BUILD_PATH}" - - REPO="" - if [ $MVN_DEPLOYMENT_TYPE == "SNAPSHOT" ]; then - REPO=$MVN_DOCKERREGISTRY_DAILY - elif [ $MVN_DEPLOYMENT_TYPE == "STAGING" ]; then - # there seems to be no staging docker registry? set to use SNAPSHOT also - #REPO=$MVN_DOCKERREGISTRY_RELEASE - REPO=$MVN_DOCKERREGISTRY_DAILY - else - echo "Fail to determine DEPLOYMENT_TYPE" - REPO=$MVN_DOCKERREGISTRY_DAILY - fi - echo "DEPLOYMENT_TYPE is: $MVN_DEPLOYMENT_TYPE, repo is $REPO" - - if [ ! -z "$REPO" ]; then - USER=$(xpath -e "//servers/server[id='$REPO']/username/text()" "$SETTINGS_FILE") - PASS=$(xpath -e "//servers/server[id='$REPO']/password/text()" "$SETTINGS_FILE") - if [ -z "$USER" ]; then - echo "Error: no user provided" - fi - if [ -z "$PASS" ]; then - echo "Error: no password provided" - fi - [ -z "$PASS" ] && PASS_PROVIDED="" || PASS_PROVIDED="" - echo docker login "$REPO" -u "$USER" -p "$PASS_PROVIDED" - docker login "$REPO" -u "$USER" -p "$PASS" - - if [ $MVN_DEPLOYMENT_TYPE == "SNAPSHOT" ]; then - REPO="$REPO/snapshots" - elif [ $MVN_DEPLOYMENT_TYPE == "STAGING" ]; then - # there seems to be no staging docker registry? set to use SNAPSHOT also - #REPO=$MVN_DOCKERREGISTRY_RELEASE - REPO="$REPO" - else - echo "Fail to determine DEPLOYMENT_TYPE" - REPO="$REPO/unknown" - fi - - OLDTAG="${LFQI}" - PUSHTAGS="${REPO}/${IMAGENAME}:${VERSION2}-${TIMESTAMP} ${REPO}/${IMAGENAME}:${VERSION2} ${REPO}/${IMAGENAME}:${VERSION2}-latest" - for NEWTAG in ${PUSHTAGS} - do - echo "tagging ${OLDTAG} to ${NEWTAG}" - docker tag "${OLDTAG}" "${NEWTAG}" - echo "pushing ${NEWTAG}" - docker push "${NEWTAG}" - OLDTAG="${NEWTAG}" - done - fi -} \ No newline at end of file diff --git a/mvn-phase-script.sh b/mvn-phase-script.sh deleted file mode 100755 index b4384e3e..00000000 --- a/mvn-phase-script.sh +++ /dev/null @@ -1,107 +0,0 @@ -#!/usr/bin/env bash - -# ================================================================================ -# Copyright (c) 2018 NOKIA Intellectual Property. All rights reserved. -# ================================================================================ -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. -# ============LICENSE_END========================================================= - -set -ex -echo "running script: [$0] for module [$1] at stage [$2]" -MVN_PROJECT_MODULEID="$1" -MVN_PHASE="$2" - - -PROJECT_ROOT="$(dirname "$0")" - -FQDN="${MVN_PROJECT_GROUPID}.${MVN_PROJECT_ARTIFACTID}" -if [ "$MVN_PROJECT_MODULEID" == "__" ]; then - MVN_PROJECT_MODULEID="" -fi - -if [[ "$MVN_PROJECT_VERSION" == *SNAPSHOT ]]; then - echo "=> for SNAPSHOT artifact build" - MVN_DEPLOYMENT_TYPE='SNAPSHOT' -else - echo "=> for STAGING/RELEASE artifact build" - MVN_DEPLOYMENT_TYPE='STAGING' -fi -echo "MVN_DEPLOYMENT_TYPE is [$MVN_DEPLOYMENT_TYPE]" - -TIMESTAMP=$(date +%C%y%m%dT%H%M%S) - -# expected environment variables -if [ -z "${MVN_NEXUSPROXY}" ]; then - echo "MVN_NEXUSPROXY environment variable not set. Cannot proceed" - exit -fi -MVN_NEXUSPROXY_HOST=$(echo "$MVN_NEXUSPROXY" |cut -f3 -d'/' | cut -f1 -d':') -echo "=> Nexus Proxy at $MVN_NEXUSPROXY_HOST, $MVN_NEXUSPROXY" - -if [ -z "$WORKSPACE" ]; then - WORKSPACE=$(pwd) -fi - -export SETTINGS_FILE=${SETTINGS_FILE:-$HOME/.m2/settings.xml} - - - -# mvn phase in life cycle -MVN_PHASE="$2" - - -echo "MVN_PROJECT_MODULEID is [$MVN_PROJECT_MODULEID]" -echo "MVN_PHASE is [$MVN_PHASE]" -echo "MVN_PROJECT_GROUPID is [$MVN_PROJECT_GROUPID]" -echo "MVN_PROJECT_ARTIFACTID is [$MVN_PROJECT_ARTIFACTID]" -echo "MVN_PROJECT_VERSION is [$MVN_PROJECT_VERSION]" -echo "MVN_NEXUSPROXY is [$MVN_NEXUSPROXY]" -echo "MVN_RAWREPO_BASEURL_UPLOAD is [$MVN_RAWREPO_BASEURL_UPLOAD]" -echo "MVN_RAWREPO_BASEURL_DOWNLOAD is [$MVN_RAWREPO_BASEURL_DOWNLOAD]" -MVN_RAWREPO_HOST=$(echo "$MVN_RAWREPO_BASEURL_UPLOAD" | cut -f3 -d'/' |cut -f1 -d':') -echo "MVN_RAWREPO_HOST is [$MVN_RAWREPO_HOST]" -echo "MVN_RAWREPO_SERVERID is [$MVN_RAWREPO_SERVERID]" -echo "MVN_DOCKERREGISTRY_SNAPSHOT is [$MVN_DOCKERREGISTRY_SNAPSHOT]" -echo "MVN_DOCKERREGISTRY_RELEASE is [$MVN_DOCKERREGISTRY_RELEASE]" -echo "MVN_DOCKERREGISTRY_PUBLIC is [$MVN_DOCKERREGISTRY_PUBLIC]" - -source "${PROJECT_ROOT}"/mvn-phase-lib.sh - - -# Customize the section below for each project -case $MVN_PHASE in -clean) - echo "==> clean phase script" - ;; -generate-sources) - echo "==> generate-sources phase script" - ;; -compile) - echo "==> compile phase script" - ;; -test) - echo "==> test phase script" - ;; -package) - echo "==> package phase script" - ;; -install) - echo "==> install phase script" - ;; -deploy) - echo "==> deploy phase script" - ;; -*) - echo "==> unprocessed phase" - ;; -esac \ No newline at end of file diff --git a/pom.xml b/pom.xml index dc79230b..23cc2755 100644 --- a/pom.xml +++ b/pom.xml @@ -9,7 +9,7 @@ org.onap.dcaegen2.services - pnf-registration-handler + prh 1.0.0-SNAPSHOT pnf-registration-handler pnf-registration-handler @@ -59,11 +59,6 @@ jetty-server 9.4.8.v20171121 - - org.eclipse.jetty - jetty-servlet - 8.1.15.v20140411 - org.eclipse.jetty jetty-servlet @@ -184,30 +179,6 @@ - - org.codehaus.mojo - exec-maven-plugin - 1.6.0 - - ${session.executionRootDirectory}/mvn-phase-script.sh - - - ${project.groupId} - ${project.artifactId} - ${project.version} - ${onap.nexus.url} - ${onap.nexus.rawrepo.baseurl.upload} - - ${onap.nexus.rawrepo.baseurl.download} - - ${onap.nexus.rawrepo.serverid} - ${onap.nexus.dockerregistry.daily} - - ${onap.nexus.dockerregistry.release} - - - - @@ -215,39 +186,6 @@ org.apache.maven.plugins maven-compiler-plugin - - org.codehaus.mojo - exec-maven-plugin - 1.6.0 - - - deploy script - deploy - - exec - - - - __ - deploy - - - - - install script - install - - exec - - - - __ - install - - - - - @@ -270,4 +208,4 @@ - \ No newline at end of file + -- cgit 1.2.3-korg