From 3edab16f5ae512b1ed746fc38e75cae1a4707b3d Mon Sep 17 00:00:00 2001
From: Lusheng Ji <lji@research.att.com>
Date: Mon, 28 Aug 2017 16:22:14 -0400
Subject: adding pom and phase script

Issue-Id: DCAEGEN2-73
Change-Id: Ibba54e0706cea0187082b3e459d4538501ff24f1
Signed-off-by: Lusheng Ji <lji@research.att.com>
---
 dcae-cli/pom.xml | 313 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 313 insertions(+)
 create mode 100644 dcae-cli/pom.xml

(limited to 'dcae-cli')

diff --git a/dcae-cli/pom.xml b/dcae-cli/pom.xml
new file mode 100644
index 0000000..0124b48
--- /dev/null
+++ b/dcae-cli/pom.xml
@@ -0,0 +1,313 @@
+<?xml version="1.0"?>
+<!--
+================================================================================
+Copyright (c) 2017 AT&T Intellectual Property. All rights reserved.
+================================================================================
+Licensed under the Apache License, Version 2.0 (the "License");
+you may not use this file except in compliance with the License.
+You may obtain a copy of the License at
+
+     http://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing, software
+distributed under the License is distributed on an "AS IS" BASIS,
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+See the License for the specific language governing permissions and
+limitations under the License.
+============LICENSE_END=========================================================
+
+ECOMP is a trademark and service mark of AT&T Intellectual Property.
+-->
+<project xmlns="http://maven.apache.org/POM/4.0.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/xsd/maven-4.0.0.xsd">
+  <modelVersion>4.0.0</modelVersion>
+  <!--parent>
+    <groupId>org.onap.oparent</groupId>
+    <artifactId>oparent</artifactId>
+    <version>1.0.0-SNAPSHOT</version>
+  </parent-->
+  <parent>
+    <groupId>org.onap.dcaegen2.platform</groupId>
+    <artifactId>cli</artifactId>
+    <version>1.0.0-SNAPSHOT</version>
+  </parent>
+  <groupId>org.onap.dcaegen2.platform.cli</groupId>
+  <artifactId>dcae-cli</artifactId>
+  <name>dcae-cli</name>
+  <version>1.0.0-SNAPSHOT</version>
+  <url>http://maven.apache.org</url>
+  <properties>
+    <project.build.sourceEncoding>UTF-8</project.build.sourceEncoding>
+    <sonar.sources>.</sonar.sources>
+    <!-- customize the SONARQUBE URL -->
+    <sonar.host.url>http://localhost:9000</sonar.host.url>
+    <!-- below are language dependent -->
+    <!-- for Python -->
+    <sonar.language>py</sonar.language>
+    <sonar.pluginName>Python</sonar.pluginName>
+    <sonar.inclusions>**/*.py</sonar.inclusions>
+    <!-- for JavaScaript -->
+    <!--
+    <sonar.language>js</sonar.language>
+    <sonar.pluginName>JS</sonar.pluginName>
+    <sonar.inclusions>**/*.js</sonar.inclusions>
+    -->
+  </properties>
+
+  <build>
+    <finalName>${project.artifactId}-${project.version}</finalName>
+    <pluginManagement>
+      <plugins>
+        <plugin>
+          <groupId>org.codehaus.mojo</groupId>
+          <artifactId>sonar-maven-plugin</artifactId>
+          <version>2.7.1</version>
+        </plugin>
+
+        <!-- nexus-staging-maven-plugin is called during deploy phase by default behavior.
+         we do not need it -->
+        <plugin>
+          <groupId>org.sonatype.plugins</groupId>
+          <artifactId>nexus-staging-maven-plugin</artifactId>
+          <version>1.6.7</version>
+          <configuration>
+            <skipNexusStagingDeployMojo>true</skipNexusStagingDeployMojo>
+          </configuration>
+        </plugin>
+      </plugins>
+    </pluginManagement>
+
+    <plugins>
+      <!-- plugin>
+        <artifactId>maven-assembly-plugin</artifactId>
+        <version>2.4.1</version>
+        <configuration>
+          <descriptors>
+            <descriptor>assembly/dep.xml</descriptor>
+          </descriptors>
+        </configuration>
+        <executions>
+          <execution>
+            <id>make-assembly</id>
+            <phase>package</phase>
+            <goals>
+              <goal>single</goal>
+            </goals>
+          </execution>
+        </executions>
+      </plugin -->
+
+      <!-- first disable the default Java plugins at various stages -->
+      <!-- maven-resources-plugin is called during "*resource" phases by default behavior.  it prepares the resources
+       dir.  we do not need it -->
+      <plugin>
+        <groupId>org.apache.maven.plugins</groupId>
+        <artifactId>maven-resources-plugin</artifactId>
+        <version>2.6</version>
+        <configuration>
+          <skip>true</skip>
+        </configuration>
+      </plugin>
+
+      <!-- maven-compiler-plugin is called during "compile" phases by default behavior.  we do not need it -->
+      <plugin>
+        <groupId>org.apache.maven.plugins</groupId>
+        <artifactId>maven-compiler-plugin</artifactId>
+        <version>3.1</version>
+        <configuration>
+          <skip>true</skip>
+        </configuration>
+      </plugin>
+
+      <!-- maven-jar-plugin is called during "compile" phase by default behavior.  we do not need it -->
+      <plugin>
+        <groupId>org.apache.maven.plugins</groupId>
+        <artifactId>maven-jar-plugin</artifactId>
+        <version>2.4</version>
+        <executions>
+          <execution>
+            <id>default-jar</id>
+            <phase/>
+          </execution>
+        </executions>
+      </plugin>
+
+      <!-- maven-install-plugin is called during "install" phase by default behavior.  it tries to copy stuff under 
+       target dir to ~/.m2.  we do not need it -->
+      <plugin>
+        <groupId>org.apache.maven.plugins</groupId>
+        <artifactId>maven-install-plugin</artifactId>
+        <version>2.4</version>
+        <configuration>
+          <skip>true</skip>
+        </configuration>
+      </plugin>
+
+      <!-- maven-surefire-plugin is called during "test" phase by default behavior.  it triggers junit test.
+       we do not need it -->
+      <plugin>
+        <groupId>org.apache.maven.plugins</groupId>
+        <artifactId>maven-surefire-plugin</artifactId>
+        <version>2.12.4</version>
+        <configuration>
+          <skipTests>true</skipTests>
+        </configuration>
+      </plugin>
+
+
+      <!-- now we configure custom action (calling a script) at various lifecycle phases -->
+      <plugin>
+        <groupId>org.codehaus.mojo</groupId>
+        <artifactId>exec-maven-plugin</artifactId>
+        <version>1.2.1</version>
+        <executions>
+          <execution>
+            <id>clean phase script</id>
+            <phase>clean</phase>
+            <goals><goal>exec</goal></goals>
+            <configuration>
+              <executable>${session.executionRootDirectory}/mvn-phase-script.sh</executable>
+              <arguments>
+                <argument>${project.artifactId}</argument>
+                <argument>clean</argument>
+              </arguments>
+              <environmentVariables>
+                <!-- make mvn properties as env for our script -->
+                <MVN_PROJECT_GROUPID>${project.groupId}</MVN_PROJECT_GROUPID> 
+                <MVN_PROJECT_ARTIFACTID>${project.artifactId}</MVN_PROJECT_ARTIFACTID> 
+                <MVN_PROJECT_VERSION>${project.version}</MVN_PROJECT_VERSION> 
+                <MVN_NEXUSPROXY>${onap.nexus.url}</MVN_NEXUSPROXY> 
+                <!--MVN_DOCKERREG_URL>${docker.push.registry}</MVN_DOCKERREG_URL--> 
+              </environmentVariables> 
+            </configuration>
+          </execution>
+
+          <execution>
+            <id>generate-sources script</id>
+            <phase>generate-sources</phase>
+            <goals><goal>exec</goal></goals>
+            <configuration>
+              <executable>mvn-phase-script.sh</executable>
+              <arguments>
+                <argument>${project.artifactId}</argument>
+                <argument>generate-sources</argument>
+              </arguments>
+              <environmentVariables>
+                <!-- make mvn properties as env for our script -->
+                <MVN_PROJECT_GROUPID>${project.groupId}</MVN_PROJECT_GROUPID> 
+                <MVN_PROJECT_ARTIFACTID>${project.artifactId}</MVN_PROJECT_ARTIFACTID> 
+                <MVN_PROJECT_VERSION>${project.version}</MVN_PROJECT_VERSION> 
+                <MVN_NEXUSPROXY>${onap.nexus.url}</MVN_NEXUSPROXY> 
+                <!--MVN_DOCKERREG_URL>${docker.push.registry}</MVN_DOCKERREG_URL--> 
+              </environmentVariables> 
+            </configuration>
+          </execution>
+
+          <execution>
+            <id>compile script</id>
+            <phase>compile</phase>
+            <goals><goal>exec</goal></goals>
+            <configuration>
+              <executable>mvn-phase-script.sh</executable>
+              <arguments>
+                <argument>${project.artifactId}</argument>
+                <argument>compile</argument>
+              </arguments>
+              <environmentVariables>
+                <!-- make mvn properties as env for our script -->
+                <MVN_PROJECT_GROUPID>${project.groupId}</MVN_PROJECT_GROUPID> 
+                <MVN_PROJECT_ARTIFACTID>${project.artifactId}</MVN_PROJECT_ARTIFACTID> 
+                <MVN_PROJECT_VERSION>${project.version}</MVN_PROJECT_VERSION> 
+                <MVN_NEXUSPROXY>${onap.nexus.url}</MVN_NEXUSPROXY> 
+                <!--MVN_DOCKERREG_URL>${docker.push.registry}</MVN_DOCKERREG_URL--> 
+              </environmentVariables> 
+            </configuration>
+          </execution>
+
+          <execution>
+            <id>package script</id>
+            <phase>package</phase>
+            <goals><goal>exec</goal></goals>
+            <configuration>
+              <executable>mvn-phase-script.sh</executable>
+              <arguments>
+                <argument>${project.artifactId}</argument>
+                <argument>package</argument>
+              </arguments>
+              <environmentVariables>
+                <!-- make mvn properties as env for our script -->
+                <MVN_PROJECT_GROUPID>${project.groupId}</MVN_PROJECT_GROUPID> 
+                <MVN_PROJECT_ARTIFACTID>${project.artifactId}</MVN_PROJECT_ARTIFACTID> 
+                <MVN_PROJECT_VERSION>${project.version}</MVN_PROJECT_VERSION> 
+                <MVN_NEXUSPROXY>${onap.nexus.url}</MVN_NEXUSPROXY> 
+                <!--MVN_DOCKERREG_URL>${docker.push.registry}</MVN_DOCKERREG_URL--> 
+              </environmentVariables> 
+            </configuration>
+          </execution>
+
+          <execution>
+            <id>test script</id>
+            <phase>test</phase>
+            <goals><goal>exec</goal></goals>
+            <configuration>
+              <executable>mvn-phase-script.sh</executable>
+              <arguments>
+                <argument>${project.artifactId}</argument>
+                <argument>test</argument>
+              </arguments>
+              <environmentVariables>
+                <!-- make mvn properties as env for our script -->
+                <MVN_PROJECT_GROUPID>${project.groupId}</MVN_PROJECT_GROUPID> 
+                <MVN_PROJECT_ARTIFACTID>${project.artifactId}</MVN_PROJECT_ARTIFACTID> 
+                <MVN_PROJECT_VERSION>${project.version}</MVN_PROJECT_VERSION> 
+                <MVN_NEXUSPROXY>${onap.nexus.url}</MVN_NEXUSPROXY> 
+                <!--MVN_DOCKERREG_URL>${docker.push.registry}</MVN_DOCKERREG_URL--> 
+              </environmentVariables> 
+            </configuration>
+          </execution>
+
+          <execution>
+            <id>install script</id>
+            <phase>install</phase>
+            <goals><goal>exec</goal></goals>
+            <configuration>
+              <executable>mvn-phase-script.sh</executable>
+              <arguments>
+                <argument>${project.artifactId}</argument>
+                <argument>install</argument>
+              </arguments>
+              <environmentVariables>
+                <!-- make mvn properties as env for our script -->
+                <MVN_PROJECT_GROUPID>${project.groupId}</MVN_PROJECT_GROUPID> 
+                <MVN_PROJECT_ARTIFACTID>${project.artifactId}</MVN_PROJECT_ARTIFACTID> 
+                <MVN_PROJECT_VERSION>${project.version}</MVN_PROJECT_VERSION> 
+                <MVN_NEXUSPROXY>${onap.nexus.url}</MVN_NEXUSPROXY> 
+                <!--MVN_DOCKERREG_URL>${docker.push.registry}</MVN_DOCKERREG_URL--> 
+              </environmentVariables> 
+            </configuration>
+          </execution>
+
+          <execution>
+            <id>deploy script</id>
+            <phase>deploy</phase>
+            <goals><goal>exec</goal></goals>
+            <configuration>
+              <executable>mvn-phase-script.sh</executable>
+              <arguments>
+                <argument>${project.artifactId}</argument>
+                <argument>deploy</argument>
+              </arguments>
+              <environmentVariables>
+                <!-- make mvn properties as env for our script -->
+                <MVN_PROJECT_GROUPID>${project.groupId}</MVN_PROJECT_GROUPID> 
+                <MVN_PROJECT_ARTIFACTID>${project.artifactId}</MVN_PROJECT_ARTIFACTID> 
+                <MVN_PROJECT_VERSION>${project.version}</MVN_PROJECT_VERSION> 
+                <MVN_NEXUSPROXY>${onap.nexus.url}</MVN_NEXUSPROXY> 
+                <!--MVN_DOCKERREG_URL>${docker.push.registry}</MVN_DOCKERREG_URL--> 
+              </environmentVariables> 
+            </configuration>
+          </execution>
+        </executions>
+      </plugin>
+    </plugins>
+  </build>
+</project>
-- 
cgit 1.2.3-korg