.. This work is licensed under a Creative Commons Attribution 4.0 International License. .. http://creativecommons.org/licenses/by/4.0 Logging ======= Logging is controlled by the configuration provided to **SNMPTRAP** by CBS, or via the fallback config file specified as the environment variable "CBS_SIM_JSON" at startup. The section of that JSON configuration that influences the various forms of application logging is referenced throughout this document, with examples. Using the JSON configuration, a base directory is specified for application data and EELF log files. Specific filenames (again, from the JSON config) are appended to the base directory value to create a full-path filename for use by SNMPTRAP. Also available is the ability to modify how frequently logs are rolled to time-stamped versions (and a new empty file is started) as well as what severity level to log to program diagnostic logs. Files will be rolled to an archived/timestamped version hourly. The actual archival (to a timestamped filename) occurs when the first trap is received **in a new hour** (or minute, or day - depending on "roll_frequency" value). Defaults are shown below: .. code-block:: json "files": { ... "roll_frequency": "hour", "minimum_severity_to_log": 2 ... }, Where to Access Information: APPLICATION DATA (TRAPS) ----------------------------------------------------- APPLICATION DATA (TRAPS) ^^^^^^^^^^^^^^^^^^^^^^^^ **SNMPTRAP** produces application-specific logs (e.g. trap logs/payloads, etc) as well as various other statistical and diagnostic logs. The location of these logs is controlled by the JSON config, using these values: .. code-block:: json "files": { "**runtime_base_dir**": "/opt/app/snmptrap", "log_dir": "logs", "data_dir": "data", "pid_dir": "tmp", "arriving_traps_log": "snmptrapd_arriving_traps.log", "snmptrapd_diag": "snmptrapd_prog_diag.log", "traps_stats_log": "snmptrapd_stats.csv", "perm_status_file": "snmptrapd_status.log", "roll_frequency": "hour", "minimum_severity_to_log": 2 ... }, The base directory for all data logs is specified with: **runtime_base_dir** Remaining log file references are appended to the *runtime_base_dir* value to specify a logfile location. The result using the above example would create the files: .. code-block:: bash /opt/app/snmptrap/logs/snmptrapd_arriving_traps.log /opt/app/snmptrap/logs/snmptrapd_prog_diag.log /opt/app/snmptrap/logs/snmptrapd_stats.csv /opt/app/snmptrap/logs/snmptrapd_status.log ARRIVING TRAPS ^^^^^^^^^^^^^^^ **SNMPTRAP** logs all arriving traps. These traps are saved in a filename created by appending *runtime_base_dir*, *log_dir* and *arriving_traps_log* from the JSON config. Using the example above, the resulting arriving trap log would be: .. code-block:: bash /opt/app/snmptrap/logs/snmptrapd_arriving_traps.log An example from this log is shown below: .. code-block:: none 1529960544.4896748 Mon Jun 25 17:02:24 2018; Mon Jun 25 17:02:24 2018 com.att.dcae.dmaap.IST3.DCAE-COLLECTOR-UCSNMP 15299605440000 1.3.6.1.4.1.999.0.1 server001 127.0.0.1 server001 v2c 751564798 0f40196a-78bb-11e8-bac7-005056865aac , "varbinds": [{"varbind_oid": "1.3.6.1.4.1.999.0.1.1", "varbind_type": "OctetString", "varbind_value": "TEST TRAP"}] *(Add: varbind type enumerations)* PUBLISHED TRAPS ^^^^^^^^^^^^^^^ SNMPTRAP's first priority is to receive and decode SNMP traps, then publish the results to a configured DMAAP/MR message bus. Traps that are successfully published (e.g. publish attempt gets a "200/ok" response from the DMAAP/MR server) are logged to a file named by the technology being used combined with the topic being published to. If you find a trap in this published log, it has been acknowledged as received by DMAAP/MR. If consumers complain of "missing traps", the source of the problem will be downstream (*not with SNMPTRAP*) if the trap has been logged here. For example, with a json config of: .. code-block:: json "dmaap_info": { "location": "mtl5", "client_id": null, "client_role": null, "topic_url": "http://172.17.0.1:3904/events/ONAP-COLLECTOR-SNMPTRAP" and .. code-block:: json "files": { "**runtime_base_dir**": "/opt/app/snmptrap", result in traps that are confirmed (200/ok) as published logged to the file: .. code-block:: bash /opt/app/snmptrap/logs/DMAAP_ONAP-COLLECTOR-SNMPTRAP.json An example from this JSON log is shown below: .. code-block:: json { "uuid": "0f40196a-78bb-11e8-bac7-005056865aac", "agent address": "127.0.0.1", "agent name": "server001", "cambria.partition": "server001", "community": "", "community len": 0, "epoch_serno": 15299605440000, "protocol version": "v2c", "time received": 1529960544.4896748, "trap category": "DCAE-COLLECTOR-UCSNMP", "sysUptime": "751564798", "notify OID": "1.3.6.1.4.1.999.0.1", "notify OID len": 9, "varbinds": [ { "varbind_oid": "1.3.6.1.4.1.999.0.1.1", "varbind_type": "OctetString", "varbind_value": "TEST TRAP" } ] } EELF ^^^^ For program/operational logging, **SNMPTRAP** follows the EELF logging convention. Please be aware that the EELF specification results in messages spread across various files. Some work may be required to find the right location (file) that contains the message you are looking for. EELF logging is controlled by the configuration provided to **SNMPTRAP** by CBS, or via the fallback config file specified as an environment variable "CBS_SIM_JSON" at startup. The section of that JSON configuration that influences EELF logging is: .. code-block:: json "files": { ... "**eelf_base_dir**": "/opt/app/snmptrap/logs", "eelf_error": "error.log", "eelf_debug": "debug.log", "eelf_audit": "audit.log", "eelf_metrics": "metrics.log", "roll_frequency": "hour", }, ... The base directory for all EELF logs is specified with: **eelf_base_dir** Remaining eelf_ references are appended to the eelf_base_dir value to specify a logfile location. The result using the above example would create the files: .. code-block:: bash /opt/app/snmptrap/logs/error.log /opt/app/snmptrap/logs/debug.log /opt/app/snmptrap/logs/audit.log /opt/app/snmptrap/logs/metrics.log Again using the above example configuration, these files will be rolled to an archived/timestamped version hourly. The actually archival (to a timestamped filename) occurs when the first trap is received **in a new hour** (or minute, or day - depending on "roll_frequency" value). Error / Warning Messages ------------------------ Program Diagnostics ^^^^^^^^^^^^^^^^^^^ Detailed application log messages can be found in "snmptrapd_diag" (JSON config reference). These can be very verbose and roll quickly depending on trap arrival rates, number of varbinds encountered, minimum_severity_to_log setting in JSON config, etc. In the default config, this file can be found at: .. code-block:: bash /opt/app/snmptrap/logs/snmptrapd_diag.log Messages will be in the general format of: .. code-block:: none 2018-04-25T17:28:10,305||snmptrapd||||INFO|100||arriving traps logged to: /opt/app/snmptrap/logs/snmptrapd_arriving_traps.log 2018-04-25T17:28:10,305||snmptrapd||||INFO|100||published traps logged to: /opt/app/snmptrap/logs/DMAAP_com.att.dcae.dmaap.IST3.DCAE-COLLECTOR-UCSNMP.json 2018-04-25T17:28:10,306||snmptrapd||||INFO|100||Runtime PID file: /opt/app/snmptrap/tmp/snmptrapd.py.pid 2018-04-25T17:28:48,019|snmp_engine_observer_cb|snmptrapd||||DETAILED|100||snmp trap arrived from 192.168.1.139, assigned uuid: 1cd77e98-48ae-11e8-98e5-005056865aac 2018-04-25T17:28:48,023|snmp_engine_observer_cb|snmptrapd||||DETAILED|100||dns cache expired or missing for 192.168.1.139 - refreshing 2018-04-25T17:28:48,027|snmp_engine_observer_cb|snmptrapd||||DETAILED|100||cache for server001 (192.168.1.139) updated - set to expire at 1524677388 2018-04-25T17:28:48,034|snmp_engine_observer_cb|snmptrapd||||DETAILED|100||snmp trap arrived from 192.168.1.139, assigned uuid: 0f40196a-78bb-11e8-bac7-005056 2018-04-25T17:28:48,036|notif_receiver_cb|snmptrapd||||DETAILED|100||processing varbinds for 0f40196a-78bb-11e8-bac7-005056 2018-04-25T17:28:48,040|notif_receiver_cb|snmptrapd||||DETAILED|100||adding 0f40196a-78bb-11e8-bac7-005056 to buffer 2018-06-25T21:02:24,491|notif_receiver_cb|snmptrapd||||DETAILED|100||trap 0f40196a-78bb-11e8-bac7-005056865aac : {"uuid": "0f40196a-78bb-11e8-bac7-005056865aac", "agent address": "192.168.1.139", "agent name": "server001", "cambria.partition": "server001", "community": "", "community len": 0, "epoch_serno": 15299605440000, "protocol version": "v2c", "time received": 1529960544.4896748, "trap category": "com.att.dcae.dmaap.IST3.DCAE-COLLECTOR-UCSNMP", "sysUptime": "751564798", "notify OID": "1.3.6.1.4.1.999.0.1", "notify OID len": 9, "varbinds": [{"varbind_oid": "1.3.6.1.4.1.999.0.1.1", "varbind_type": "OctetString", "varbind_value": "TEST TRAP"}]} 2018-06-25T21:02:24,496|post_dmaap|snmptrapd||||DETAILED|100||post_data_enclosed: {"uuid": "0f40196a-78bb-11e8-bac7-005056865aac", "agent address": "192.168.1.139", "agent name": "server001", "cambria.partition": "server001", "community": "", "community len": 0, "epoch_serno": 15299605440000, "protocol version": "v2c", "time received": 1529960544.4896748, "trap category": "com.att.dcae.dmaap.IST3.DCAE-COLLECTOR-UCSNMP", "sysUptime": "751564798", "notify OID": "1.3.6.1.4.1.999.0.1", "notify OID len": 9, "varbinds": [{"varbind_oid": "1.3.6.1.4.1.999.0.1.1", "varbind_type": "OctetString", "varbind_value": "TEST TRAP"}]} Platform Status ^^^^^^^^^^^^^^^ .. code-block:: json "perm_status_file": "snmptrapd_status.log",