DCAE mS Installation ==================== The below steps covers manual setup of DCAE VM’s and DCAE service components. VESCollector ------------   DCAE VES Collector can be configured on VM with ubuntu-16.04 image (m1.small should suffice if this is only service) and 20Gb cinder storage 1. Install docker   sudo apt-get update   sudo apt install `docker.io `__ 1. Pull the latest container from onap nexus sudo docker login -u docker -p docker `nexus.onap.org `__:10001 sudo docker pull `nexus.onap.org `__:10001/onap/org.onap.dcaegen2.collectors.ves.vescollector:1.1 1. Start the VESCollector with below command sudo docker run -d --name vescollector -p 8080:8080/tcp -p 8443:8443/tcp -P -e DMAAPHOST='' `nexus.onap.org `__:10001/onap/org.onap.dcaegen2.collectors.ves.vescollector:1.1  Note:  Change the dmaaphost to required DMAAP ip. To change the dmaap information for a running container,  stop the active container and rerun above command changing the dmaap IP. 1. Verification i. Check logs under container /opt/app/VESCollector/logs/collector.log for errors ii. If no active feed, you can simulate an event into collector via curl curl -i  -X POST -d @ --header "Content-Type: application/json" http://localhost:8080/eventListener/v5 -k Note: If DMAAPHOST provided is invalid, you will see exception around publish on the collector.logs (collector queues and attempts to resend the event hence exceptions reported will be periodic).  i. Below two topic configuration are pre-set into this container.  When valid DMAAP instance ip was provided and VES events are received, the collector will post to below topics. Fault -  http://:3904/events/unauthenticated.SEC\_FAULT\_OUTPUT Measurement -http://:3904/events/unauthenticated.SEC\_MEASUREMENT\_OUTPUT VM Init ~~~~~~ To address windriver server in-stability, the below **init.sh** script was used to start the container on VM restart.   +----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+ | #!/bin/sh | | | | sudo docker ps \| grep "vescollector" | | | | if [ $? -ne 0 ]; then | | | |         sudo docker login -u docker -p docker nexus.onap.org:10001 | | | |         sudo docker pull nexus.onap.org:10001/onap/org.onap.dcaegen2.collectors.ves.vescollector:1.1 | | | |         sudo docker rm -f vescollector | | | |         echo "Collector process not running - $(date)" >> /home/ubuntu/startuplog | | | |         sudo docker run -d --name vescollector -p 8080:8080/tcp -p 8443:8443/tcp -P -e DMAAPHOST='10.12.25.96' nexus.onap.org:10001/onap/org.onap.dcaegen2.collectors.ves.vescollector:1.1 | | | | else | | | |         echo "Collector process running - $(date)" >> /home/ubuntu/startuplog | | | | fi | +==============================================================================================================================================================================================+ +----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+ This script was invoked via VM init script (rc.d). ln -s /home/ubuntu/init.sh /etc/init.d/init.sh sudo  update-rc.d init.sh start 2   ThresholdCrossingAnalysis (TCA/CDAP) ------------------------------------ The platform deploys CDAP as cluster and instantiates TCA. For the manual setup, we will leverage the CDAP SDK docker container to deploy TCA instances.  To setup TCA, choose VM with ubuntu-16.04 image, m1.medium size and 50gb cinder volumes. 1. Install docker  sudo apt-get update  sudo apt install `docker.io `__ 1. Pull CDAP SDK container sudo docker pull caskdata/cdap-standalone:4.1.2 1. Deploy and run the CDAP container sudo docker run -d --name cdap-sdk-2 -p 11011:11011 -p 11015:11015 caskdata/cdap-standalone:4.1.2 1. Create Namespace on CDAP application curl -X PUT http://localhost:11015/v3/namespaces/cdap_tca_hi_lo 1. Create TCA app preference file under ~ubuntu as below +--------------------------------------------------------------------------------------------------------------------------------------------+ | { | | | |   "publisherContentType" : "application/json", | | | |   "publisherHostName" : "10.12.25.96", | | | |   "publisherHostPort" : "3904", | | | |   "publisherMaxBatchSize" : "1", | | | |   "publisherMaxRecoveryQueueSize" : "100000", | | | |   "publisherPollingInterval" : "20000", | | | |   "publisherProtocol" : "http", | | | |   "publisherTopicName" : "unauthenticated.DCAE\_CL\_OUTPUT", | | | |   "subscriberConsumerGroup" : "OpenDCAE-c1", | | | |   "subscriberConsumerId" : "c1", | | | |   "subscriberContentType" : "application/json", | | | |   "subscriberHostName" : "10.12.25.96", | | | |   "subscriberHostPort" : "3904", | | | |   "subscriberMessageLimit" : "-1", | | | |   "subscriberPollingInterval" : "20000", | | | |   "subscriberProtocol" : "http", | | | |   "subscriberTimeoutMS" : "-1", | | | |   "subscriberTopicName" : "unauthenticated.SEC\_MEASUREMENT\_OUTPUT", | | | |   "enableAAIEnrichment" : false, | | | |   "aaiEnrichmentHost" : "10.12.25.72", | | | |   "aaiEnrichmentPortNumber" : 8443, | | | |   "aaiEnrichmentProtocol" : "https", | | | |   "aaiEnrichmentUserName" : "DCAE", | | | |   "aaiEnrichmentUserPassword" : "DCAE", | | | |   "aaiEnrichmentIgnoreSSLCertificateErrors" : false, | | | |   "aaiVNFEnrichmentAPIPath" : "/aai/v11/network/generic-vnfs/generic-vnf", | | | |   "aaiVMEnrichmentAPIPath" :  "/aai/v11/search/nodes-query", | | | |   "tca\_policy" : "{ | | | |         \\"domain\\": \\"measurementsForVfScaling\\", | | | |         \\"metricsPerEventName\\": [{ | | | |                 \\"eventName\\": \\"vFirewallBroadcastPackets\\", | | | |                 \\"controlLoopSchemaType\\": \\"VNF\\", | | | |                 \\"policyScope\\": \\"DCAE\\", | | | |                 \\"policyName\\": \\"DCAE.Config\_tca-hi-lo\\", | | | |                 \\"policyVersion\\": \\"v0.0.1\\", | | | |                 \\"thresholds\\": [{ | | | |                         \\"closedLoopControlName\\": \\"ControlLoop-vFirewall-d0a1dfc6-94f5-4fd4-a5b5-4630b438850a\\", | | | |                         \\"version\\": \\"1.0.2\\", | | | |                         \\"fieldPath\\": \\"$.event.measurementsForVfScalingFields.vNicUsageArray[\*].receivedTotalPacketsDelta\\", | | | |                         \\"thresholdValue\\": 300, | | | |                         \\"direction\\": \\"LESS\_OR\_EQUAL\\", | | | |                         \\"severity\\": \\"MAJOR\\", | | | |                         \\"closedLoopEventStatus\\": \\"ONSET\\" | | | |                 }, { | | | |                         \\"closedLoopControlName\\": \\"ControlLoop-vFirewall-d0a1dfc6-94f5-4fd4-a5b5-4630b438850a\\", | | | |                         \\"version\\": \\"1.0.2\\", | | | |                         \\"fieldPath\\": \\"$.event.measurementsForVfScalingFields.vNicUsageArray[\*].receivedTotalPacketsDelta\\", | | | |                         \\"thresholdValue\\": 700, | | | |                         \\"direction\\": \\"GREATER\_OR\_EQUAL\\", | | | |                         \\"severity\\": \\"CRITICAL\\", | | | |                         \\"closedLoopEventStatus\\": \\"ONSET\\" | | | |                 }] | | | |         }, { | | | |                 \\"eventName\\": \\"vLoadBalancer\\", | | | |                 \\"controlLoopSchemaType\\": \\"VM\\", | | | |                 \\"policyScope\\": \\"DCAE\\", | | | |                 \\"policyName\\": \\"DCAE.Config\_tca-hi-lo\\", | | | |                 \\"policyVersion\\": \\"v0.0.1\\", | | | |                 \\"thresholds\\": [{ | | | |                         \\"closedLoopControlName\\": \\"ControlLoop-vDNS-6f37f56d-a87d-4b85-b6a9-cc953cf779b3\\", | | | |                         \\"version\\": \\"1.0.2\\", | | | |                         \\"fieldPath\\": \\"$.event.measurementsForVfScalingFields.vNicUsageArray[\*].receivedTotalPacketsDelta\\", | | | |                         \\"thresholdValue\\": 300, | | | |                         \\"direction\\": \\"GREATER\_OR\_EQUAL\\", | | | |                         \\"severity\\": \\"CRITICAL\\", | | | |                         \\"closedLoopEventStatus\\": \\"ONSET\\" | | | |                 }] | | | |         }, { | | | |                 \\"eventName\\": \\"Measurement\_vGMUX\\", | | | |                 \\"controlLoopSchemaType\\": \\"VNF\\", | | | |                 \\"policyScope\\": \\"DCAE\\", | | | |                 \\"policyName\\": \\"DCAE.Config\_tca-hi-lo\\", | | | |                 \\"policyVersion\\": \\"v0.0.1\\", | | | |                 \\"thresholds\\": [{ | | | |                         \\"closedLoopControlName\\": \\"ControlLoop-vCPE-48f0c2c3-a172-4192-9ae3-052274181b6e\\", | | | |                         \\"version\\": \\"1.0.2\\", | | | |                         \\"fieldPath\\": \\"$.event.measurementsForVfScalingFields.additionalMeasurements[\*].arrayOfFields[0].value\\", | | | |                         \\"thresholdValue\\": 0, | | | |                         \\"direction\\": \\"EQUAL\\", | | | |                         \\"severity\\": \\"MAJOR\\", | | | |                         \\"closedLoopEventStatus\\": \\"ABATED\\" | | | |                 }, { | | | |                         \\"closedLoopControlName\\": \\"ControlLoop-vCPE-48f0c2c3-a172-4192-9ae3-052274181b6e\\", | | | |                         \\"version\\": \\"1.0.2\\", | | | |                         \\"fieldPath\\": \\"$.event.measurementsForVfScalingFields.additionalMeasurements[\*].arrayOfFields[0].value\\", | | | |                         \\"thresholdValue\\": 0, | | | |                         \\"direction\\": \\"GREATER\\", | | | |                         \\"severity\\": \\"CRITICAL\\", | | | |                         \\"closedLoopEventStatus\\": \\"ONSET\\" | | | |                 }] | | | |         }] | | | | }" | | | | } | +============================================================================================================================================+ +--------------------------------------------------------------------------------------------------------------------------------------------+  Note: Dmaap configuration are specified on this file on publisherHostName and subscriberHostName. To be changed as required\*\* 1. Copy below script to CDAP server (this gets latest image from nexus and deploys TCA application) and execute it +---------------------------------------------------------------------------------------------------------------------------------------------------------------+ | #!/bin/sh | | | | TCA\_JAR=dcae-analytics-cdap-tca-2.0.0.jar | | | | rm -f /home/ubuntu/$TCA\_JAR | | | | cd /home/ubuntu/ | | | | wget https://nexus.onap.org/service/local/repositories/staging/content/org/onap/dcaegen2/analytics/tca/dcae-analytics-cdap-tca/2.0.0/$TCA\_JAR | | | | if [ $? -eq 0 ]; then | | | |         if [ -f /home/ubuntu/$TCA\_JAR ]; then | | | |                 echo "Restarting TCA CDAP application using $TCA\_JAR artifact" | | | |         else | | | |                 echo "ERROR: $TCA\_JAR missing" | | | |                 exit 1 | | | |         fi | | | | else | | | |         echo "ERROR: $TCA\_JAR not found in nexus" | | | |         exit 1 | | | | fi | | | | # stop programs | | | | curl -X POST http://localhost:11015/v3/namespaces/cdap\_tca\_hi\_lo/apps/dcae-tca/workers/TCADMaaPMRPublisherWorker/stop | | | | curl -X POST http://localhost:11015/v3/namespaces/cdap\_tca\_hi\_lo/apps/dcae-tca/workers/TCADMaaPMRSubscriberWorker/stop | | | | curl -X POST http://localhost:11015/v3/namespaces/cdap\_tca\_hi\_lo/apps/dcae-tca/flows/TCAVESCollectorFlow/stop | | | | # delete application | | | | curl -X DELETE http://localhost:11015/v3/namespaces/cdap\_tca\_hi\_lo/apps/dcae-tca# delete artifact | | | | curl -X DELETE http://localhost:11015/v3/namespaces/cdap\_tca\_hi\_lo/artifacts/dcae-analytics-cdap-tca/versions/2.0.0# load artifact | | | | curl -X POST --data-binary @/home/ubuntu/$TCA\_JAR http://localhost:11015/v3/namespaces/cdap\_tca\_hi\_lo/artifacts/dcae-analytics-cdap-tcaecho# create app | | | | curl -X PUT -d @/home/ubuntu/tca\_app\_config.json http://localhost:11015/v3/namespaces/cdap\_tca\_hi\_lo/apps/dcae-tca# load preferences | | | | curl -X PUT -d @/home/ubuntu/tca\_app\_preferences.json http://localhost:11015/v3/namespaces/cdap\_tca\_hi\_lo/apps/dcae-tca/preferences# start programs | | | | curl -X POST http://localhost:11015/v3/namespaces/cdap\_tca\_hi\_lo/apps/dcae-tca/workers/TCADMaaPMRPublisherWorker/start | | | | curl -X POST http://localhost:11015/v3/namespaces/cdap\_tca\_hi\_lo/apps/dcae-tca/workers/TCADMaaPMRSubscriberWorker/start | | | | curl -X POST http://localhost:11015/v3/namespaces/cdap\_tca\_hi\_lo/apps/dcae-tca/flows/TCAVESCollectorFlow/startecho# get status of programs | | | | curl http://localhost:11015/v3/namespaces/cdap\_tca\_hi\_lo/apps/dcae-tca/workers/TCADMaaPMRPublisherWorker/status | | | | curl http://localhost:11015/v3/namespaces/cdap\_tca\_hi\_lo/apps/dcae-tca/workers/TCADMaaPMRSubscriberWorker/status | | | | curl http://localhost:11015/v3/namespaces/cdap\_tca\_hi\_lo/apps/dcae-tca/flows/TCAVESCollectorFlow/statusecho | +===============================================================================================================================================================+ +---------------------------------------------------------------------------------------------------------------------------------------------------------------+ 1. Verify TCA application and logs via CDAP GUI processes The overall flow can be checked here TCA Configuration Change ~~~~~~~~~~~~~~~~~~~~~~~ Typical configuration changes include changing DMAAP host and/or Policy configuration. If necessary, modify the file on step #5 and run the script noted as step #6 to redeploy TCA with updated configuration. VM Init ~~~~~~ To address windriver server in-stability, the below **init.sh** script was used to restart the container on VM restart.  This script was invoked via VM init script (rc.d). +------------------------------------------------------------------------------------------------------------------------------+ | #!/bin/sh | | | | #docker run -d --name cdap-sdk -p 11011:11011 -p 11015:11015 caskdata/cdap-standalone:4.1.2 | | | | sudo docker restart cdap-sdk-2 | | | | sleep 30 | | | | # start program | | | | curl -X POST http://localhost:11015/v3/namespaces/cdap\_tca\_hi\_lo/apps/dcae-tca/workers/TCADMaaPMRPublisherWorker/start | | | | curl -X POST http://localhost:11015/v3/namespaces/cdap\_tca\_hi\_lo/apps/dcae-tca/workers/TCADMaaPMRSubscriberWorker/start | | | | curl -X POST http://localhost:11015/v3/namespaces/cdap\_tca\_hi\_lo/apps/dcae-tca/flows/TCAVESCollectorFlow/start | +==============================================================================================================================+ +------------------------------------------------------------------------------------------------------------------------------+   This script was invoked via VM init script (rc.d). ln -s /home/ubuntu/init.sh /etc/init.d/init.sh sudo  update-rc.d init.sh start 2