From 0245de0204ca80ec0154ca5161a616d64f6ffb1a Mon Sep 17 00:00:00 2001 From: Vijay Date: Wed, 18 Oct 2017 17:27:55 +0000 Subject: dcae ms installation Issue-Id:DCAEGEN2-128 Change-Id: Id1f805dce6e2f3513cf5450eb6f78807ed6bb24d Signed-off-by: Vijay --- docs/sections/installation.rst | 466 ++++++++++++++++++++++++++++++++++++----- 1 file changed, 419 insertions(+), 47 deletions(-) (limited to 'docs/sections') diff --git a/docs/sections/installation.rst b/docs/sections/installation.rst index 65f80920..ab90cebe 100644 --- a/docs/sections/installation.rst +++ b/docs/sections/installation.rst @@ -1,69 +1,441 @@ -.. This work is licensed under a Creative Commons Attribution 4.0 International License. -.. http://creativecommons.org/licenses/by/4.0 +DCAE mS Installation +==================== -Installation -============ +The below steps covers manual setup of DCAE VM’s and DCAE service +components. VESCollector ------------ +  + DCAE VES Collector can be configured on VM with ubuntu-16.04 image (m1.small should suffice if this is only service) and 20Gb cinder storage -1) Install docker +1. Install docker + +  sudo apt-get update + +  sudo apt install `docker.io `__ + +1. Pull the latest container from onap nexus + + sudo docker login -u docker -p docker + `nexus.onap.org `__:10001 + + sudo docker pull + `nexus.onap.org `__:10001/onap/org.onap.dcaegen2.collectors.ves.vescollector:1.1 + +1. Start the VESCollector with below command + + sudo docker run -d --name vescollector -p 8080:8080/tcp -p + 8443:8443/tcp -P -e DMAAPHOST='' + `nexus.onap.org `__:10001/onap/org.onap.dcaegen2.collectors.ves.vescollector:1.1 + +  Note:  Change the dmaaphost to required DMAAP ip. To change the + dmaap information for a running container,  stop the active + container and rerun above command changing the dmaap IP. + +1. Verification + +i. Check logs under container /opt/app/VESCollector/logs/collector.log + for errors + +ii. If no active feed, you can simulate an event into collector via curl + + curl -i  -X POST -d @ --header "Content-Type: + application/json" http://localhost:8080/eventListener/v5 -k + + Note: If DMAAPHOST provided is invalid, you will see exception + around publish on the collector.logs (collector queues and attempts + to resend the event hence exceptions reported will be periodic).  + +i. Below two topic configuration are pre-set into this container.  When + valid DMAAP instance ip was provided and VES events are received, + the collector will post to below topics. + + Fault - +  http://:3904/events/unauthenticated.SEC\_FAULT\_OUTPUT + + Measurement + -http://:3904/events/unauthenticated.SEC\_MEASUREMENT\_OUTPUT + +VM Init +~~~~~~ + +To address windriver server in-stability, the below **init.sh** script +was used to start the container on VM restart.   + ++----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+ +| #!/bin/sh | +| | +| sudo docker ps \| grep "vescollector" | +| | +| if [ $? -ne 0 ]; then | +| | +|         sudo docker login -u docker -p docker nexus.onap.org:10001 | +| | +|         sudo docker pull nexus.onap.org:10001/onap/org.onap.dcaegen2.collectors.ves.vescollector:1.1 | +| | +|         sudo docker rm -f vescollector | +| | +|         echo "Collector process not running - $(date)" >> /home/ubuntu/startuplog | +| | +|         sudo docker run -d --name vescollector -p 8080:8080/tcp -p 8443:8443/tcp -P -e DMAAPHOST='10.12.25.96' nexus.onap.org:10001/onap/org.onap.dcaegen2.collectors.ves.vescollector:1.1 | +| | +| else | +| | +|         echo "Collector process running - $(date)" >> /home/ubuntu/startuplog | +| | +| fi | ++==============================================================================================================================================================================================+ ++----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+ + +This script was invoked via VM init script (rc.d). + +ln -s /home/ubuntu/init.sh /etc/init.d/init.sh + +sudo  update-rc.d init.sh start 2 + +  + +ThresholdCrossingAnalysis (TCA/CDAP) +------------------------------------ + +The platform deploys CDAP as cluster and instantiates TCA. For the +manual setup, we will leverage the CDAP SDK docker container to deploy +TCA instances.  To setup TCA, choose VM with ubuntu-16.04 image, +m1.medium size and 50gb cinder volumes. + +1. Install docker + +  sudo apt-get update + +  sudo apt install `docker.io `__ + +1. Pull CDAP SDK container + +sudo docker pull caskdata/cdap-standalone:4.1.2 + +1. Deploy and run the CDAP container + + sudo docker run -d --name cdap-sdk-2 -p 11011:11011 -p 11015:11015 + caskdata/cdap-standalone:4.1.2 + +1. Create Namespace on CDAP application + +curl -X PUT http://localhost:11015/v3/namespaces/cdap_tca_hi_lo + +1. Create TCA app preference file under ~ubuntu as below + ++--------------------------------------------------------------------------------------------------------------------------------------------+ +| { | +| | +|   "publisherContentType" : "application/json", | +| | +|   "publisherHostName" : "10.12.25.96", | +| | +|   "publisherHostPort" : "3904", | +| | +|   "publisherMaxBatchSize" : "1", | +| | +|   "publisherMaxRecoveryQueueSize" : "100000", | +| | +|   "publisherPollingInterval" : "20000", | +| | +|   "publisherProtocol" : "http", | +| | +|   "publisherTopicName" : "unauthenticated.DCAE\_CL\_OUTPUT", | +| | +|   "subscriberConsumerGroup" : "OpenDCAE-c1", | +| | +|   "subscriberConsumerId" : "c1", | +| | +|   "subscriberContentType" : "application/json", | +| | +|   "subscriberHostName" : "10.12.25.96", | +| | +|   "subscriberHostPort" : "3904", | +| | +|   "subscriberMessageLimit" : "-1", | +| | +|   "subscriberPollingInterval" : "20000", | +| | +|   "subscriberProtocol" : "http", | +| | +|   "subscriberTimeoutMS" : "-1", | +| | +|   "subscriberTopicName" : "unauthenticated.SEC\_MEASUREMENT\_OUTPUT", | +| | +|   "enableAAIEnrichment" : false, | +| | +|   "aaiEnrichmentHost" : "10.12.25.72", | +| | +|   "aaiEnrichmentPortNumber" : 8443, | +| | +|   "aaiEnrichmentProtocol" : "https", | +| | +|   "aaiEnrichmentUserName" : "DCAE", | +| | +|   "aaiEnrichmentUserPassword" : "DCAE", | +| | +|   "aaiEnrichmentIgnoreSSLCertificateErrors" : false, | +| | +|   "aaiVNFEnrichmentAPIPath" : "/aai/v11/network/generic-vnfs/generic-vnf", | +| | +|   "aaiVMEnrichmentAPIPath" :  "/aai/v11/search/nodes-query", | +| | +|   "tca\_policy" : "{ | +| | +|         \\"domain\\": \\"measurementsForVfScaling\\", | +| | +|         \\"metricsPerEventName\\": [{ | +| | +|                 \\"eventName\\": \\"vFirewallBroadcastPackets\\", | +| | +|                 \\"controlLoopSchemaType\\": \\"VNF\\", | +| | +|                 \\"policyScope\\": \\"DCAE\\", | +| | +|                 \\"policyName\\": \\"DCAE.Config\_tca-hi-lo\\", | +| | +|                 \\"policyVersion\\": \\"v0.0.1\\", | +| | +|                 \\"thresholds\\": [{ | +| | +|                         \\"closedLoopControlName\\": \\"ControlLoop-vFirewall-d0a1dfc6-94f5-4fd4-a5b5-4630b438850a\\", | +| | +|                         \\"version\\": \\"1.0.2\\", | +| | +|                         \\"fieldPath\\": \\"$.event.measurementsForVfScalingFields.vNicUsageArray[\*].receivedTotalPacketsDelta\\", | +| | +|                         \\"thresholdValue\\": 300, | +| | +|                         \\"direction\\": \\"LESS\_OR\_EQUAL\\", | +| | +|                         \\"severity\\": \\"MAJOR\\", | +| | +|                         \\"closedLoopEventStatus\\": \\"ONSET\\" | +| | +|                 }, { | +| | +|                         \\"closedLoopControlName\\": \\"ControlLoop-vFirewall-d0a1dfc6-94f5-4fd4-a5b5-4630b438850a\\", | +| | +|                         \\"version\\": \\"1.0.2\\", | +| | +|                         \\"fieldPath\\": \\"$.event.measurementsForVfScalingFields.vNicUsageArray[\*].receivedTotalPacketsDelta\\", | +| | +|                         \\"thresholdValue\\": 700, | +| | +|                         \\"direction\\": \\"GREATER\_OR\_EQUAL\\", | +| | +|                         \\"severity\\": \\"CRITICAL\\", | +| | +|                         \\"closedLoopEventStatus\\": \\"ONSET\\" | +| | +|                 }] | +| | +|         }, { | +| | +|                 \\"eventName\\": \\"vLoadBalancer\\", | +| | +|                 \\"controlLoopSchemaType\\": \\"VM\\", | +| | +|                 \\"policyScope\\": \\"DCAE\\", | +| | +|                 \\"policyName\\": \\"DCAE.Config\_tca-hi-lo\\", | +| | +|                 \\"policyVersion\\": \\"v0.0.1\\", | +| | +|                 \\"thresholds\\": [{ | +| | +|                         \\"closedLoopControlName\\": \\"ControlLoop-vDNS-6f37f56d-a87d-4b85-b6a9-cc953cf779b3\\", | +| | +|                         \\"version\\": \\"1.0.2\\", | +| | +|                         \\"fieldPath\\": \\"$.event.measurementsForVfScalingFields.vNicUsageArray[\*].receivedTotalPacketsDelta\\", | +| | +|                         \\"thresholdValue\\": 300, | +| | +|                         \\"direction\\": \\"GREATER\_OR\_EQUAL\\", | +| | +|                         \\"severity\\": \\"CRITICAL\\", | +| | +|                         \\"closedLoopEventStatus\\": \\"ONSET\\" | +| | +|                 }] | +| | +|         }, { | +| | +|                 \\"eventName\\": \\"Measurement\_vGMUX\\", | +| | +|                 \\"controlLoopSchemaType\\": \\"VNF\\", | +| | +|                 \\"policyScope\\": \\"DCAE\\", | +| | +|                 \\"policyName\\": \\"DCAE.Config\_tca-hi-lo\\", | +| | +|                 \\"policyVersion\\": \\"v0.0.1\\", | +| | +|                 \\"thresholds\\": [{ | +| | +|                         \\"closedLoopControlName\\": \\"ControlLoop-vCPE-48f0c2c3-a172-4192-9ae3-052274181b6e\\", | +| | +|                         \\"version\\": \\"1.0.2\\", | +| | +|                         \\"fieldPath\\": \\"$.event.measurementsForVfScalingFields.additionalMeasurements[\*].arrayOfFields[0].value\\", | +| | +|                         \\"thresholdValue\\": 0, | +| | +|                         \\"direction\\": \\"EQUAL\\", | +| | +|                         \\"severity\\": \\"MAJOR\\", | +| | +|                         \\"closedLoopEventStatus\\": \\"ABATED\\" | +| | +|                 }, { | +| | +|                         \\"closedLoopControlName\\": \\"ControlLoop-vCPE-48f0c2c3-a172-4192-9ae3-052274181b6e\\", | +| | +|                         \\"version\\": \\"1.0.2\\", | +| | +|                         \\"fieldPath\\": \\"$.event.measurementsForVfScalingFields.additionalMeasurements[\*].arrayOfFields[0].value\\", | +| | +|                         \\"thresholdValue\\": 0, | +| | +|                         \\"direction\\": \\"GREATER\\", | +| | +|                         \\"severity\\": \\"CRITICAL\\", | +| | +|                         \\"closedLoopEventStatus\\": \\"ONSET\\" | +| | +|                 }] | +| | +|         }] | +| | +| }" | +| | +| } | ++============================================================================================================================================+ ++--------------------------------------------------------------------------------------------------------------------------------------------+ + +  Note: Dmaap configuration are specified on this file on + publisherHostName and subscriberHostName. To be changed as + required\*\* + +1. Copy below script to CDAP server (this gets latest image from nexus + and deploys TCA application) and execute it - sudo apt-get update - sudo apt install docker.io ++---------------------------------------------------------------------------------------------------------------------------------------------------------------+ +| #!/bin/sh | +| | +| TCA\_JAR=dcae-analytics-cdap-tca-2.0.0.jar | +| | +| rm -f /home/ubuntu/$TCA\_JAR | +| | +| cd /home/ubuntu/ | +| | +| wget https://nexus.onap.org/service/local/repositories/staging/content/org/onap/dcaegen2/analytics/tca/dcae-analytics-cdap-tca/2.0.0/$TCA\_JAR | +| | +| if [ $? -eq 0 ]; then | +| | +|         if [ -f /home/ubuntu/$TCA\_JAR ]; then | +| | +|                 echo "Restarting TCA CDAP application using $TCA\_JAR artifact" | +| | +|         else | +| | +|                 echo "ERROR: $TCA\_JAR missing" | +| | +|                 exit 1 | +| | +|         fi | +| | +| else | +| | +|         echo "ERROR: $TCA\_JAR not found in nexus" | +| | +|         exit 1 | +| | +| fi | +| | +| # stop programs | +| | +| curl -X POST http://localhost:11015/v3/namespaces/cdap\_tca\_hi\_lo/apps/dcae-tca/workers/TCADMaaPMRPublisherWorker/stop | +| | +| curl -X POST http://localhost:11015/v3/namespaces/cdap\_tca\_hi\_lo/apps/dcae-tca/workers/TCADMaaPMRSubscriberWorker/stop | +| | +| curl -X POST http://localhost:11015/v3/namespaces/cdap\_tca\_hi\_lo/apps/dcae-tca/flows/TCAVESCollectorFlow/stop | +| | +| # delete application | +| | +| curl -X DELETE http://localhost:11015/v3/namespaces/cdap\_tca\_hi\_lo/apps/dcae-tca# delete artifact | +| | +| curl -X DELETE http://localhost:11015/v3/namespaces/cdap\_tca\_hi\_lo/artifacts/dcae-analytics-cdap-tca/versions/2.0.0# load artifact | +| | +| curl -X POST --data-binary @/home/ubuntu/$TCA\_JAR http://localhost:11015/v3/namespaces/cdap\_tca\_hi\_lo/artifacts/dcae-analytics-cdap-tcaecho# create app | +| | +| curl -X PUT -d @/home/ubuntu/tca\_app\_config.json http://localhost:11015/v3/namespaces/cdap\_tca\_hi\_lo/apps/dcae-tca# load preferences | +| | +| curl -X PUT -d @/home/ubuntu/tca\_app\_preferences.json http://localhost:11015/v3/namespaces/cdap\_tca\_hi\_lo/apps/dcae-tca/preferences# start programs | +| | +| curl -X POST http://localhost:11015/v3/namespaces/cdap\_tca\_hi\_lo/apps/dcae-tca/workers/TCADMaaPMRPublisherWorker/start | +| | +| curl -X POST http://localhost:11015/v3/namespaces/cdap\_tca\_hi\_lo/apps/dcae-tca/workers/TCADMaaPMRSubscriberWorker/start | +| | +| curl -X POST http://localhost:11015/v3/namespaces/cdap\_tca\_hi\_lo/apps/dcae-tca/flows/TCAVESCollectorFlow/startecho# get status of programs | +| | +| curl http://localhost:11015/v3/namespaces/cdap\_tca\_hi\_lo/apps/dcae-tca/workers/TCADMaaPMRPublisherWorker/status | +| | +| curl http://localhost:11015/v3/namespaces/cdap\_tca\_hi\_lo/apps/dcae-tca/workers/TCADMaaPMRSubscriberWorker/status | +| | +| curl http://localhost:11015/v3/namespaces/cdap\_tca\_hi\_lo/apps/dcae-tca/flows/TCAVESCollectorFlow/statusecho | ++===============================================================================================================================================================+ ++---------------------------------------------------------------------------------------------------------------------------------------------------------------+ -2) Pull the latest container from onap nexus +1. Verify TCA application and logs via CDAP GUI processes - sudo docker login -u docker -p docker nexus.onap.org:10001 - sudo docker pull - nexus.onap.org:10001/onap/org.onap.dcaegen2.collectors.ves.vescollector:1.1 + The overall flow can be checked here -3) Start the VESCollector with below command +TCA Configuration Change +~~~~~~~~~~~~~~~~~~~~~~~ - Note: Change the dmaaphost to required DMAAP ip +Typical configuration changes include changing DMAAP host and/or Policy +configuration. If necessary, modify the file on step #5 and run the +script noted as step #6 to redeploy TCA with updated configuration. - sudo docker run -d --name vescollector -p 8080:8080/tcp -p - 8443:8443/tcp -P -e DMAAPHOST='10.12.25.96' - nexus.onap.org:10001/onap/org.onap.dcaegen2.collectors.ves.vescollector:1.1 +VM Init +~~~~~~ - Note: To change the dmaap information for a running container, stop the active container and rerun above command changing the dmaap IP. +To address windriver server in-stability, the below **init.sh** script +was used to restart the container on VM restart.  This script was +invoked via VM init script (rc.d). -4) Verification ++------------------------------------------------------------------------------------------------------------------------------+ +| #!/bin/sh | +| | +| #docker run -d --name cdap-sdk -p 11011:11011 -p 11015:11015 caskdata/cdap-standalone:4.1.2 | +| | +| sudo docker restart cdap-sdk-2 | +| | +| sleep 30 | +| | +| # start program | +| | +| curl -X POST http://localhost:11015/v3/namespaces/cdap\_tca\_hi\_lo/apps/dcae-tca/workers/TCADMaaPMRPublisherWorker/start | +| | +| curl -X POST http://localhost:11015/v3/namespaces/cdap\_tca\_hi\_lo/apps/dcae-tca/workers/TCADMaaPMRSubscriberWorker/start | +| | +| curl -X POST http://localhost:11015/v3/namespaces/cdap\_tca\_hi\_lo/apps/dcae-tca/flows/TCAVESCollectorFlow/start | ++==============================================================================================================================+ ++------------------------------------------------------------------------------------------------------------------------------+ - a. Check logs under container /opt/app/VESCollector/logs/collector.log for errors - - b. If no active feed, you can simulate an event into collector via curl - curl -i -X POST -d @ --header "Content-Type:application/json" http://localhost:8080/eventListener/v5 -k +  - c. Topic configuration are pre-set into this container. When valid DMAAP instance ip was provided and VES events are received, the collector will post to MEASUREMENT and FAULT Topics. - Fault - http://:3904/events/unauthenticated.SEC\_FAULT\_OUTPUT - Measurement - http://:3904/events/unauthenticated.SEC\_MEASUREMENT\_OUTPUT +This script was invoked via VM init script (rc.d). -VM INIT ---------------- -To address windriver server in-stability, the following init.sh script was used to start the container on VM restart. +ln -s /home/ubuntu/init.sh /etc/init.d/init.sh -:: - #!/bin/sh - sudo docker ps \| grep "vescollector" - if [ $? -ne 0 ]; then - sudo docker login -u docker -p docker nexus.onap.org:10001 - sudo docker pull - nexus.onap.org:10001/onap/org.onap.dcaegen2.collectors.ves.vescollector:1.1 - sudo docker rm -f vescollector - echo "Collector process not running - $(date)" >> - /home/ubuntu/startuplog - sudo docker run -d --name vescollector -p 8080:8080/tcp -p - 8443:8443/tcp -P -e DMAAPHOST='10.12.25.96' - nexus.onap.org:10001/onap/org.onap.dcaegen2.collectors.ves.vescollector:1.1 - else - echo "Collector process running - $(date)" >>/home/ubuntu/startuplog - fi +sudo  update-rc.d init.sh start 2 -:: - ln -s /home/ubuntu/init.sh /etc/init.d/init.sh - sudo update-rc.d init.sh start 2 -- cgit 1.2.3-korg