From eaac78d809a0a019718cb8b070f496b6883bb130 Mon Sep 17 00:00:00 2001 From: Lusheng Ji Date: Wed, 6 Jun 2018 00:20:03 -0400 Subject: Fix doc build warnings Issue-ID: DCAEGEN2-516 Change-Id: I94f1c7fcf5e4a21752c3ce9d8d71d98f2140e1ee Signed-off-by: Lusheng Ji --- docs/sections/installation_manual.rst | 351 ---------------------------------- 1 file changed, 351 deletions(-) delete mode 100644 docs/sections/installation_manual.rst (limited to 'docs/sections/installation_manual.rst') diff --git a/docs/sections/installation_manual.rst b/docs/sections/installation_manual.rst deleted file mode 100644 index 91e8ad7e..00000000 --- a/docs/sections/installation_manual.rst +++ /dev/null @@ -1,351 +0,0 @@ -DCAE Installation -================= - -The below steps covers manual setup of DCAE VM’s and DCAE service -components. - -VESCollector ------------- - -  - -DCAE VES Collector can be configured on VM with ubuntu-16.04 image -(m1.small should suffice if this is only service) and 20Gb cinder -storage - -1. Install docker - -.. code-block:: bash - - sudo apt-get update - sudo apt install docker.io - -2. Pull the latest container from onap nexus - -.. code-block:: bash - - sudo docker login -u docker -p docker nexus.onap.org:10001 - - sudo docker pull nexus.onap.org:10001/onap/org.onap.dcaegen2.collectors.ves.vescollector:v1.1.0 - -3. Start the VESCollector with below command - -.. code-block:: bash - - sudo docker run -d --name vescollector -p 8080:8080/tcp -p - 8443:8443/tcp -P -e DMAAPHOST='' - nexus.onap.org:10001/onap/org.onap.dcaegen2.collectors.ves.vescollector:v1.1.0 - -.. Note:  Change the dmaaphost to required DMAAP ip. To change the - dmaap information for a running container,  stop the active - container and rerun above command changing the dmaap IP. - -4. Verification - -i. Check logs under container /opt/app/VESCollector/logs/collector.log - for errors - -ii. If no active feed, you can simulate an event into collector via curl - -.. code-block:: bash - - curl -i  -X POST -d @ --header "Content-Type:application/json" -k http://localhost:8080/eventListener/v5 - -.. Note: If DMAAPHOST provided is invalid, you will see exception - around publish on the collector.logs (collector queues and attempts - to resend the event hence exceptions reported will be periodic).  - -i. Below two topic configuration are pre-set into this container.  When - valid DMAAP instance ip was provided and VES events are received, - the collector will post to below topics. - - Fault - -  http://:3904/events/unauthenticated.SEC\_FAULT\_OUTPUT - - Measurement - -http://:3904/events/unauthenticated.SEC\_MEASUREMENT\_OUTPUT - -VM Init -~~~~~~~ - -To address windriver server in-stability, the below **init.sh** script -was used to start the container on VM restart.   - -.. code-block:: bash - - #!/bin/sh - sudo docker ps | grep “vescollector” - if [ $? -ne 0 ]; then - sudo docker login -u docker -p docker nexus.onap.org:10001 - sudo docker pull nexus.onap.org:10001/onap/org.onap.dcaegen2.collectors.ves.vescollector:1.1 - sudo docker rm -f vescollector - echo “Collector process not running - $(date)” >> /home/ubuntu/startuplog - sudo docker run -d –name vescollector -p 8080:8080/tcp -p 8443:8443/tcp -P -e DMAAPHOST=‘10.12.25.96’ nexus.onap.org:10001/onap/org.onap.dcaegen2.collectors.ves.vescollector:1.1 - else - echo “Collector process running - $(date)” >> /home/ubuntu/startuplog - fi - - -This script was invoked via VM init script (rc.d). - -.. code-block:: bash - - ln -s /home/ubuntu/init.sh /etc/init.d/init.sh - sudo  update-rc.d init.sh start 2 - -  - -ThresholdCrossingAnalysis (TCA/CDAP) ------------------------------------- - -The platform deploys CDAP as cluster and instantiates TCA. For the -manual setup, we will leverage the CDAP SDK docker container to deploy -TCA instances.  To setup TCA, choose VM with ubuntu-16.04 image, -m1.medium size and 50gb cinder volumes. - -1. Install docker - -.. code-block:: bash - - sudo apt-get update - sudo apt install docker.io - -2. Pull CDAP SDK container - -.. code-block:: bash - - sudo docker pull caskdata/cdap-standalone:4.1.2 - -3. Deploy and run the CDAP container - -.. code-block:: bash - - sudo docker run -d --name cdap-sdk-2 -p 11011:11011 -p 11015:11015 - caskdata/cdap-standalone:4.1.2 - -4. Create Namespace on CDAP application - -.. code-block:: bash - - curl -X PUT http://localhost:11015/v3/namespaces/cdap_tca_hi_lo - -5. Create TCA app config file - "tca\_app\_config.json" under ~ubuntu as below - -.. code-block:: json - - { - "artifact": { - "name": "dcae-analytics-cdap-tca", - "version": "2.0.0", - "scope": "user" - }, - - "config": { - "appName": "dcae-tca", - "appDescription": "DCAE Analytics Threshold Crossing Alert Application", - "tcaVESMessageStatusTableName": "TCAVESMessageStatusTable", - "tcaVESMessageStatusTableTTLSeconds": 86400.0, - "tcaAlertsAbatementTableName": "TCAAlertsAbatementTable", - "tcaAlertsAbatementTableTTLSeconds": 1728000.0, - "tcaVESAlertsTableName": "TCAVESAlertsTable", - "tcaVESAlertsTableTTLSeconds": 1728000.0, - "thresholdCalculatorFlowletInstances": 2.0, - "tcaSubscriberOutputStreamName": "TCASubscriberOutputStream" - } - } - - -6. Create TCA app preference file under ~ubuntu as below - -.. code-block:: json - - { - "publisherContentType" : "application/json", - "publisherHostName" : "10.12.25.96", - "publisherHostPort" : "3904", - "publisherMaxBatchSize" : "1", - "publisherMaxRecoveryQueueSize" : "100000", - "publisherPollingInterval" : "20000", - "publisherProtocol" : "http", - "publisherTopicName" : "unauthenticated.DCAE_CL_OUTPUT", - "subscriberConsumerGroup" : "OpenDCAE-c1", - "subscriberConsumerId" : "c1", - "subscriberContentType" : "application/json", - "subscriberHostName" : "10.12.25.96", - "subscriberHostPort" : "3904", - "subscriberMessageLimit" : "-1", - "subscriberPollingInterval" : "20000", - "subscriberProtocol" : "http", - "subscriberTimeoutMS" : "-1", - "subscriberTopicName" : "unauthenticated.SEC_MEASUREMENT_OUTPUT", - "enableAAIEnrichment" : false, - "aaiEnrichmentHost" : "10.12.25.72", - "aaiEnrichmentPortNumber" : 8443, - "aaiEnrichmentProtocol" : "https", - "aaiEnrichmentUserName" : "DCAE", - "aaiEnrichmentUserPassword" : "DCAE", - "aaiEnrichmentIgnoreSSLCertificateErrors" : false, - "aaiVNFEnrichmentAPIPath" : "/aai/v11/network/generic-vnfs/generic-vnf", - "aaiVMEnrichmentAPIPath" : "/aai/v11/search/nodes-query", - "tca_policy" : "{ - \"domain\": \"measurementsForVfScaling\", - \"metricsPerEventName\": [{ - \"eventName\": \"vFirewallBroadcastPackets\", - \"controlLoopSchemaType\": \"VNF\", - \"policyScope\": \"DCAE\", - \"policyName\": \"DCAE.Config_tca-hi-lo\", - \"policyVersion\": \"v0.0.1\", - \"thresholds\": [{ - \"closedLoopControlName\": \"ControlLoop-vFirewall-d0a1dfc6-94f5-4fd4-a5b5-4630b438850a\", - \"version\": \"1.0.2\", - \"fieldPath\": \"$.event.measurementsForVfScalingFields.vNicUsageArray[*].receivedTotalPacketsDelta\", - \"thresholdValue\": 300, - \"direction\": \"LESS_OR_EQUAL\", - \"severity\": \"MAJOR\", - \"closedLoopEventStatus\": \"ONSET\" - }, { - \"closedLoopControlName\": \"ControlLoop-vFirewall-d0a1dfc6-94f5-4fd4-a5b5-4630b438850a\", - \"version\": \"1.0.2\", - \"fieldPath\": \"$.event.measurementsForVfScalingFields.vNicUsageArray[*].receivedTotalPacketsDelta\", - \"thresholdValue\": 700, - \"direction\": \"GREATER_OR_EQUAL\", - \"severity\": \"CRITICAL\", - \"closedLoopEventStatus\": \"ONSET\" - }] - }, { - \"eventName\": \"vLoadBalancer\", - \"controlLoopSchemaType\": \"VM\", - \"policyScope\": \"DCAE\", - \"policyName\": \"DCAE.Config_tca-hi-lo\", - \"policyVersion\": \"v0.0.1\", - \"thresholds\": [{ - \"closedLoopControlName\": \"ControlLoop-vDNS-6f37f56d-a87d-4b85-b6a9-cc953cf779b3\", - \"version\": \"1.0.2\", - \"fieldPath\": \"$.event.measurementsForVfScalingFields.vNicUsageArray[*].receivedTotalPacketsDelta\", - \"thresholdValue\": 300, - \"direction\": \"GREATER_OR_EQUAL\", - \"severity\": \"CRITICAL\", - \"closedLoopEventStatus\": \"ONSET\" - }] - }, { - \"eventName\": \"Measurement_vGMUX\", - \"controlLoopSchemaType\": \"VNF\", - \"policyScope\": \"DCAE\", - \"policyName\": \"DCAE.Config_tca-hi-lo\", - \"policyVersion\": \"v0.0.1\", - \"thresholds\": [{ - \"closedLoopControlName\": \"ControlLoop-vCPE-48f0c2c3-a172-4192-9ae3-052274181b6e\", - \"version\": \"1.0.2\", - \"fieldPath\": \"$.event.measurementsForVfScalingFields.additionalMeasurements[*].arrayOfFields[0].value\", - \"thresholdValue\": 0, - \"direction\": \"EQUAL\", - \"severity\": \"MAJOR\", - \"closedLoopEventStatus\": \"ABATED\" - }, { - \"closedLoopControlName\": \"ControlLoop-vCPE-48f0c2c3-a172-4192-9ae3-052274181b6e\", - \"version\": \"1.0.2\", - \"fieldPath\": \"$.event.measurementsForVfScalingFields.additionalMeasurements[*].arrayOfFields[0].value\", - \"thresholdValue\": 0, - \"direction\": \"GREATER\", - \"severity\": \"CRITICAL\", - \"closedLoopEventStatus\": \"ONSET\" - }] - }] - }" - } - - -.. Note: Dmaap configuration are specified on this file on - publisherHostName and subscriberHostName. To be changed as - required\*\* - -6a. To enable AAI Enrichment in TCA for CL event, following updates should be done to TCA app preference file before proceeding - -.. code-block:: json - - "enableAAIEnrichment" : true - "aaiEnrichmentHost" : - "aaiEnrichmentIgnoreSSLCertificateErrors" : true - - - -7. Copy below script to CDAP server (this gets latest image from nexus and deploys TCA application) and execute it - -.. code-block:: bash - - #!/bin/sh - TCA_JAR=dcae-analytics-cdap-tca-2.0.0.jar - rm -f /home/ubuntu/$TCA_JAR - cd /home/ubuntu/ - wget https://nexus.onap.org/service/local/repositories/releases/content/org/onap/dcaegen2/analytics/tca/dcae-analytics-cdap-tca/2.0.0/$TCA_JAR - if [ $? -eq 0 ]; then - if [ -f /home/ubuntu/$TCA_JAR ]; then - echo “Restarting TCA CDAP application using $TCA_JAR artifact” - else - echo “ERROR: $TCA_JAR missing” - exit 1 - fi - else - echo “ERROR: $TCA_JAR not found in nexus” - exit 1 - fi - # stop programs - curl -X POST http://localhost:11015/v3/namespaces/cdap_tca_hi_lo/apps/dcae-tca/workers/TCADMaaPMRPublisherWorker/stop - curl -X POST http://localhost:11015/v3/namespaces/cdap_tca_hi_lo/apps/dcae-tca/workers/TCADMaaPMRSubscriberWorker/stop - curl -X POST http://localhost:11015/v3/namespaces/cdap_tca_hi_lo/apps/dcae-tca/flows/TCAVESCollectorFlow/stop - # delete application - curl -X DELETE http://localhost:11015/v3/namespaces/cdap_tca_hi_lo/apps/dcae-tca - # delete artifact - curl -X DELETE http://localhost:11015/v3/namespaces/cdap_tca_hi_lo/artifacts/dcae-analytics-cdap-tca/versions/2.0.0 - # load artifact - curl -X POST –data-binary @/home/ubuntu/$TCA_JAR http://localhost:11015/v3/namespaces/cdap_tca_hi_lo/artifacts/dcae-analytics-cdap-tca - # create app - curl -X PUT -d @/home/ubuntu/tca_app_config.json http://localhost:11015/v3/namespaces/cdap_tca_hi_lo/apps/dcae-tca - # load preferences - curl -X PUT -d @/home/ubuntu/tca_app_preferences.json http://localhost:11015/v3/namespaces/cdap_tca_hi_lo/apps/dcae-tca/preferences - # start programs - curl -X POST http://localhost:11015/v3/namespaces/cdap_tca_hi_lo/apps/dcae-tca/workers/TCADMaaPMRPublisherWorker/start - curl -X POST http://localhost:11015/v3/namespaces/cdap_tca_hi_lo/apps/dcae-tca/workers/TCADMaaPMRSubscriberWorker/start - curl -X POST http://localhost:11015/v3/namespaces/cdap_tca_hi_lo/apps/dcae-tca/flows/TCAVESCollectorFlow/start - echo - # get status of programs - curl http://localhost:11015/v3/namespaces/cdap_tca_hi_lo/apps/dcae-tca/workers/TCADMaaPMRPublisherWorker/status - curl http://localhost:11015/v3/namespaces/cdap_tca_hi_lo/apps/dcae-tca/workers/TCADMaaPMRSubscriberWorker/status - curl http://localhost:11015/v3/namespaces/cdap_tca_hi_lo/apps/dcae-tca/flows/TCAVESCollectorFlow/status - echo - - -8. Verify TCA application and logs via CDAP GUI processes - - The overall flow can be checked here - -TCA Configuration Change -~~~~~~~~~~~~~~~~~~~~~~~~ - -Typical configuration changes include changing DMAAP host and/or Policy configuration. If necessary, modify the file on step #6 and run the script noted as step #7 to redeploy TCA with updated configuration. - -VM Init -~~~~~~~ - -To address windriver server in-stability, the below **init.sh** script -was used to restart the container on VM restart.  This script was -invoked via VM init script (rc.d). - -.. code-block:: bash - - #!/bin/sh - #docker run -d –name cdap-sdk -p 11011:11011 -p 11015:11015 caskdata/cdap-standalone:4.1.2 - sudo docker restart cdap-sdk-2 - sleep 30 - # start program - curl -X POST http://localhost:11015/v3/namespaces/cdap_tca_hi_lo/apps/dcae-tca/workers/TCADMaaPMRPublisherWorker/start - curl -X POST http://localhost:11015/v3/namespaces/cdap_tca_hi_lo/apps/dcae-tca/workers/TCADMaaPMRSubscriberWorker/start - curl -X POST http://localhost:11015/v3/namespaces/cdap_tca_hi_lo/apps/dcae-tca/flows/TCAVESCollectorFlow/start - - -This script was invoked via VM init script (rc.d). - -.. code-block:: bash - - ln -s /home/ubuntu/init.sh /etc/init.d/init.sh - sudo  update-rc.d init.sh start 2 -- cgit 1.2.3-korg