diff options
| -rw-r--r-- | .gitreview | 4 | ||||
| -rw-r--r-- | LICENSE.txt | 19 | ||||
| -rw-r--r-- | README.md | 8 | ||||
| -rw-r--r-- | configs/package-cdap3vm.json | 29 | ||||
| -rw-r--r-- | configs/package-dcae-analytics-tca.json | 29 | ||||
| -rwxr-xr-x | scripts/package | 571 |
6 files changed, 660 insertions, 0 deletions
diff --git a/.gitreview b/.gitreview new file mode 100644 index 0000000..73e4c62 --- /dev/null +++ b/.gitreview @@ -0,0 +1,4 @@ +[gerrit] +host=gerrit.openecomp.org +port=29418 +project=dcae/apod/buildtools.git diff --git a/LICENSE.txt b/LICENSE.txt new file mode 100644 index 0000000..7255bc3 --- /dev/null +++ b/LICENSE.txt @@ -0,0 +1,19 @@ +/* + * ============LICENSE_START========================================== + * =================================================================== + * Copyright © 2017 AT&T Intellectual Property. All rights reserved. + * =================================================================== + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * ============LICENSE_END============================================ + * ECOMP and OpenECOMP are trademarks and service marks of AT&T Intellectual Property. + */ diff --git a/README.md b/README.md new file mode 100644 index 0000000..8adb8cb --- /dev/null +++ b/README.md @@ -0,0 +1,8 @@ +APOD Build Tools +====================================== + +This is the repository for tools and config files that are needed to build and package APOD applications. + +### Build Instructions +There is no build for this repository. Each APOD project will check it out and use the tools as part of the application build. + diff --git a/configs/package-cdap3vm.json b/configs/package-cdap3vm.json new file mode 100644 index 0000000..36ed776 --- /dev/null +++ b/configs/package-cdap3vm.json @@ -0,0 +1,29 @@ +{ + "applicationName": "dcae-cdap-small-hadoop", + "maintainer": "OpenECOMP Support <support@lists.openecomp.org>", + "description": "dcae-cdap-small-hadoop installs a set of installer scripts and configuration templates for installing Hadoop 2.4.3 and CDAP 3.5.x on a 3-node Ubuntu 14 cluster. Note: as user root, you must run the installer: sudo bash /opt/app/cdap-small-hadoop/install.sh", + + "version": "1.0.0", + + "executionUser": "dcae", + "executionGroup": "dcae", + + "fileUser": "dcae", + "fileGroup": "dcae", + + "groupId": "org.openecomp.dcae.apod", + + "internalDependencies": [ ], + + "directoryTreeTops": { + "/opt": "/opt/app/dcae-cdap-small-hadoop" + }, + + "debian": { + "replaces": [ ], + + "conflicts": [ ], + + "externalDependencies": [ ] + } +} diff --git a/configs/package-dcae-analytics-tca.json b/configs/package-dcae-analytics-tca.json new file mode 100644 index 0000000..8c811b6 --- /dev/null +++ b/configs/package-dcae-analytics-tca.json @@ -0,0 +1,29 @@ +{ + "applicationName": "dcae-analytics-tca", + "maintainer": "OpenECOMP Support <support@lists.openecomp.org>", + "description": "OpenECOMP DCAE APOD TCA Hi Lo CDAP application. dcae-analytics-tca installs the CDAP dcae-analytics-tca....jar file in /opt/app/cdap-apps ", + + "version": "1.0.0", + + "executionUser": "dcae", + "executionGroup": "dcae", + + "fileUser": "dcae", + "fileGroup": "dcae", + + "groupId": "org.openecomp.dcae.apod", + + "internalDependencies": [ ], + + "directoryTreeTops": { + "/opt": "/opt/app/cdap-apps" + }, + + "debian": { + "replaces": [ ], + + "conflicts": [ ], + + "externalDependencies": [ ] + } +} diff --git a/scripts/package b/scripts/package new file mode 100755 index 0000000..0a3a2a7 --- /dev/null +++ b/scripts/package @@ -0,0 +1,571 @@ +#!/usr/bin/env python3 +# -*- indent-tabs-mode: nil -*- vi: set expandtab: + +#* ============LICENSE_START========================================== +#* =================================================================== +#* Copyright © 2017 AT&T Intellectual Property. All rights reserved. +#* =================================================================== +#* Licensed under the Apache License, Version 2.0 (the "License"); +#* you may not use this file except in compliance with the License. +#* You may obtain a copy of the License at +#* +#* http://www.apache.org/licenses/LICENSE-2.0 +#* +#* Unless required by applicable law or agreed to in writing, software +#* distributed under the License is distributed on an "AS IS" BASIS, +#* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +#* See the License for the specific language governing permissions and +#* limitations under the License. +#* ============LICENSE_END============================================ +#* ECOMP and OpenECOMP are trademarks and service marks of AT&T Intellectual Property. + + +import sys, os, argparse, time, re, posix, atexit, binascii +yamlOk = True +try: + import yaml +except: + yamlOk = False +jsonOk = True +try: + import simplejson as json +except: + try: + import json + except: + jsonOk = False + +def date(): + """ return a datestamp """ + return time.strftime("%Y-%m-%d %H:%M:%S") + +def infoMsg(msg): + """ generate an informational message to stdout """ + print("%s:INFO:%s" % (date(), msg)) + +def traceMsg(msg): + """ if verbose flag is on, generate an informational message to stdout """ + global args + if args.verbose: + infoMsg(msg) + +def warnMsg(msg): + """ generate a warning message to stdout """ + print("%s:WARNING:%s" % (date(), msg)) + +def die(msg): + """ generate a FATAL message to stdout and exit """ + print("%s:FATAL:%s" % (date(), msg)) + sys.exit(2) + +def displayCwd(): + """ display the working directory """ + infoMsg("working directory '" + os.getcwd() + "'") + +def cdCheck(dir): + """ cd to a new directory and die if we cannot """ + try: + traceMsg("cd %s" % dir) + os.chdir(dir) + except: + die("Cannot chdir(" + dir + ")") + +def removeDirPath(path, prmsg = True, gone_ok = False): + """ + remove a directory path + prmsg - print a message before proceeding + gone_ok - do not warn if a path does not exist + """ + if prmsg: + infoMsg("Removing path '%s'" % path) + nmlist = None + try: + nmlist = os.listdir(path) + except FileNotFoundError: + if not gone_ok: + warnMsg("path no longer exists: %s" % path) + return + except: + e = sys.exc_info()[0] + warnMsg("removing path (%s) gave this error: %s" % (path, e)) + return + + for nm in nmlist: + if nm != "." and nm != "..": + pathnm = path + "/" + nm + if os.path.isdir(pathnm): + removeDirPath(pathnm, prmsg = False) + else: + # infoMsg(">>>>removing file %s" % pathnm) + try: + os.remove(pathnm) + except: + e = sys.exc_info()[0] + warnMsg("Could not remove file (%s) because of %s" % (pathnm, e)) + + # infoMsg(">>>>removing directory %s" % pathnm) + try: + os.rmdir(path) + except FileNotFoundError: + if not gone_ok: + warnMsg("Could not remove directory (%s) because of FileNotFound" % path) + except: + e = sys.exc_info()[0] + warnMsg("Could not remove directory (%s) because of %s" % (path, e)) + +def verboseOsSystem(cmd): + """ execute a shell command, printing a trace message first """ + traceMsg("About to execute '%s'" % cmd) + os.system(cmd) + +def lndir(fr, to): + """ create a copy of a tree structure, using hard links where possible """ + global args + removeDirPath(to + "/" + fr, prmsg = args.verbose, gone_ok = True) + verboseOsSystem("find '%s' -print0 | cpio -pdml0 '%s'" % ( fr, to )) + +y = None + +def getParam(name, dflt = None): + """ + Retrieve the contents of a parameter file, rooted where specified. + Return None when it does not exist. + """ + global y, args + if y is None: + fname = args.directory + "/" + args.repackageyaml + if args.repackageyaml.endswith(".yaml"): + if not yamlOk: + die("YAML not available on this machine") + else: + with open(fname, "r") as fd: + try: + contents = fd.read() + contents = re.sub("^\t+", " ", contents, flags=re.M) + y = yaml.safe_load(contents) + except: + die("Invalid yaml in '%s'" % fname) + elif args.repackageyaml.endswith(".json"): + if not jsonOk: + die("JSON not available on this machine") + else: + with open(fname, "r") as fd: + try: + contents = fd.read() + y = json.loads(contents) + except: + type, value, traceback = sys.exc_info() + die("Invalid json in '%s': %s" % (fname, value)) + else: + die("%s must end either in .yaml or .json" % repackageyaml) + + e = "y" + name + inp = None + try: + inp = eval(e,{"__builtins__":None},{"y":y}) + except KeyError: + if dflt is not None: + return dflt + if inp is None: + die("The %s must be be set in %s" % (name, args.repackageyaml)) + return inp + +def cleanupTmpRoot(): + """ clean out the tmp directory """ + global TMPROOT + removeDirPath(TMPROOT, prmsg = args.verbose, gone_ok = True) + +def genDebianChangelog(fname): + """ generate a Debian change log, hard-coded to this for now """ + with open(fname, "w") as fd: + fd.write("OpenECOMP 1701 Demo\n") + +def uploadDocker(name,tag): + """ tag & push Docker image to nexus docker registry """ + ns = getParam( '["docker"]["namespace"]' ) + image = name + ":" + tag + repo = os.environ.get("DOCKERREGISTRY") + "/" + ns + "/" + image + tagCmd = "docker tag " + image + " " + repo + pushCmd = "docker push " + repo + verboseOsSystem(tagCmd); + verboseOsSystem(pushCmd); + +# The Debian control archive contents can include the following files: +# +# control: A list of dependencies, and other useful information to indentify the package, such as +# a brief description of the package. +# md5sums: contains MD5 checksums of all files in the package in order to detect corrupt or incomplete files. +# preinst, postinst, prerm and postrm are optional scripts that are executed before or after installing, +# updating or removing the package. +# copyright: any needed copyright notice +# changelog: +# conffiles: Lists the files of the package that should be treated as configuration files. +# Configuration files are not overwritten during an update unless specified. +# debian-binary: contains the deb-package version, currently 2.0 +# templates: A file with error descriptions and dialogs during installation +# config: is an optional script that supports the debconf configuration mechanism. +# shlibs: list of shared library dependencies. + +def genDebianControl(fname): + """ generate a Debian control file """ + with open(fname, "w") as fd: + global APPL, VER, BNBR, MAINTAINER + fd.write("Package: %s\n" % APPL) + fd.write("Version: %s-%s\n" % (VER, BNBR)) + fd.write("Section: utils\n") + fd.write("Priority: optional\n") + fd.write("Architecture: all\n") + fd.write("Maintainer: %s\n" % MAINTAINER) + deps = getParam('["debian"]["externalDependencies"]') + depends = "" + sep = " " + if deps: + for dep in deps: + for d, v in dep.items(): + depends += sep + d + " (" + v + ")" + sep = ", " + fd.write("Depends:%s\n" % depends) + fd.write("Conflicts:\n") + fd.write("Replaces:\n") + desc = getParam( '["description"]' ) + desc = re.sub("^[ \t]*$", ".", desc, flags=re.M) + desc = re.sub("^[ \t]*", " ", desc, flags=re.M) + fd.write("Description:%s\n" % desc) + +def genDebianMd5sums(fname): + """ generate an MD5 listing of all of the staged files """ + global ROOTDIR + verboseOsSystem("cd '%s/stage' && find * -type f -exec md5sum -b {} + > %s" % (ROOTDIR, fname)) + +def genCopyright(fname, prefix = ""): + """ generate a copyright statement, with the given prefix on each line """ + with open(fname, "w") as fd: + fd.write(prefix + "Copyright (C) 2016 AT&T Intellectual Property. All rights reserved.\n") + fd.write(prefix + "\n") + fd.write(prefix + "Licensed under the Apache License, Version 2.0 (the License);\n") + fd.write(prefix + "you may not use this file except in compliance with the License.\n") + fd.write(prefix + "You may obtain a copy of the License at\n\n") + fd.write(prefix + "http://www.apache.org/licenses/LICENSE-2.0\n\n") + fd.write(prefix + "Unless required by applicable law or agreed to in writing, software\n") + fd.write(prefix + "distributed under the License is distributed on an AS IS BASIS,\n") + fd.write(prefix + "WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\n") + fd.write(prefix + "See the License for the specific language governing permissions and\n") + fd.write(prefix + "limitations under the License.\n") + +def isExe(fname): + """ check if a path exists and is executable """ + return os.path.exists(fname) and os.access(fname, os.X_OK) + +def isFileExe(fname): + """ check if a path exists as a file and is executable """ + return os.path.isfile(fname) and os.access(fname, os.X_OK) + +def genFileList(path, testFn): + """ generate a list of files, rooted at path, that all pass the given test """ + ret = [] + try: + nmlist = os.listdir(path) + except FileNotFoundError: + return ret + except: + e = sys.exc_info()[0] + warnMsg("error while listing path (%s): %s" % (path, e)) + return ret + + for nm in nmlist: + if nm != "." and nm != "..": + pathnm = path + "/" + nm + if os.path.isdir(pathnm): + more = genFileList(pathnm, testFn) + ret.extend(more) + elif testFn(pathnm): + ret.append(pathnm) + return ret + + +def createDockerTempFiles(L): + """ create the temp file structure needed to create a docker image """ + global args, ROOTDIR + removeDirPath(L, prmsg = args.verbose, gone_ok = True) + os.makedirs(L, exist_ok = True) + + cdCheck(ROOTDIR + "/stage") + copyList = [] + for i in os.listdir(): + if not i.startswith("."): + lndir(i, L) + copyList.append(i) + + posix.link(ROOTDIR + "/Dockerfile", L + "/Dockerfile") + + +def buildDebian(): + """ Build a local debian formatted package """ + infoMsg( 'Building a Debian package ...' ) + global args, TMPROOT, ROOTDIR + if args.skipexecution: + return + + global APPL, VER, BNBR + DEBF = APPL + "_" + VER + "-" + BNBR + ".deb" + RELDEBF = APPL + "_" + VER + ".deb" + OUTDEBF = args.outputdirectory + "/" + DEBF + + if args.usecache and os.path.exists(OUTDEBF): + infoMsg( "Already built %s" % DEBF) + + else: + L = TMPROOT + "/debian" + LD = TMPROOT + "/debian/DEBIAN" + removeDirPath(L, prmsg = args.verbose, gone_ok = True) + os.makedirs(LD, exist_ok = True) + + cdCheck(ROOTDIR + "/stage") + for i in os.listdir(): + if not i.startswith("."): + lndir(i, L) + + genCopyright(LD + "/copyright") + genDebianControl(LD + "/control") + genDebianChangelog(LD + "/changelog") + genDebianMd5sums(LD + "/md5sums") + + cdCheck(ROOTDIR) + execUser = getParam('["executionUser"]') + fileUser = getParam('["fileUser"]') + fileGroup = getParam('["fileGroup"]') + isRoot = execUser == "root" + for cname in [ "preinst", "postinst", "prerm", "postrm" ]: + comCname = "common/" + cname + ldName = LD + "/" + cname + if isExe(comCname) or cname == "postinst": + traceMsg("linking %s to %s" % (comCname, ldName)) + if isRoot and isExe(comCname): + posix.link(comCname, ldName) + else: + with open(ldName, "w") as out: + if cname == "postinst" and fileUser != "root": + for nm in os.listdir("stage"): + t = getParam( '["directoryTreeTops"]["/' + nm + '"]', "n/a" ) + if t == "n/a": + t = "/" + nm + print("chown -R '%s:%s' '%s'" % (fileUser, fileGroup, t), file=out) + print("find '%s' -type d -exec chmod 755 {} +" % t, file=out) + print("find '%s' ! -type d -exec chmod 644 {} +" % t, file=out) + # list each executable file separately + for fname in genFileList("stage", isFileExe): + fname = fname[6:] # remove 'stage/' from beginning + print("chmod 755 '/%s'" % fname, file=out) + + if isExe(comCname): + with open(comCname, "r") as inp: + print("gawk '{\n" + + " f = $0\n" + + " for (i = 1; i <= length(f); i+=2) {\n" + + " printf(\"%c\", strtonum(\"0X\" substr(f,i,2)))\n" + + " }\n" + + "}' > /tmp/rep.$$ <<EOF", file=out) + for line in inp: + for c in line: + # print(">>%02x<<" % ord(c)) + print("%02x" % ord(c), file=out, end="") + print("", file=out) + print("EOF\n" + + "chmod a+x /tmp/rep.$$\n" + + "su " + execUser + " -c /tmp/rep.$$\n" + + "rm -f /tmp/rep.$$\n", file=out) + verboseOsSystem("chmod a+x " + ldName) + + elif os.path.exists(comCname): + die(comCname + " must be executable") + + cdCheck(TMPROOT) + + if args.skipbuild: + traceMsg('Skipping final build') + return + + verboseOsSystem(". '%s'; fakeroot -- dpkg-deb --verbose --build '%s'" % (args.environfile, L)) + os.makedirs(args.outputdirectory, exist_ok = True) + os.rename("debian.deb", OUTDEBF) + + if not os.path.exists(OUTDEBF): + infoMsg( "Unsuccesful in building %s" % DEBF) + return + + infoMsg( "Successfully built %s" % DEBF) + + if args.upload: + groupId = getParam('["debian"]["groupId"]', getParam('["groupId"]')) + verboseOsSystem(os.environ.get("REPACKAGEDEBIANUPLOAD").format(OUTDEBF, DEBF, groupId, RELDEBF)) + +def buildDocker(): + """ Build a DOCKER image """ + image = getParam( '["docker"]["image"]', "n/a" ) + if image == "n/a": + global APPL + image = APPL + tag = getParam( '["docker"]["tag"]' ) + + infoMsg( 'Building a (local) docker image ...' ) + global args, TMPROOT + if args.skipexecution: + return + + L = TMPROOT + "/docker" + createDockerTempFiles(L) + + if args.skipbuild: + traceMsg('Skipping final build') + return + + cdCheck(L) + verboseOsSystem(". '%s'; docker build -t '%s:%s' ." % (args.environfile, image, tag)) + + if args.upload: + uploadDocker(image,tag) + + +def strToBool(string): + return True if (type(string) is str and string == "true") else False if (type(string) is str and string == "false") else string + +def main(): + """ the main executable function """ + + # + # deal with the program arguments - + # we build two different types of argument lists based on + # context. jenkins requires positional arguments while linux cmd line + # permits parameterized ones. the jenkins positional argument list is + # smaller + # + parser = argparse.ArgumentParser( + description="Build the specified packages. 'package-type' is one or more of " + + "docker, debian, " + + "(comma-separated), or 'all' to build all of them." + ) + + REPACKAGEYAML = "repackage.yaml" + REPACKAGEJSON = "repackage.json" + if os.environ.get("JENKINS"): + parser.add_argument("packagetype",help= "debian" + + "|docker" + + "|all") + parser.add_argument("upload",help="upload package to appropriate repository",nargs='?',default="false") + parser.add_argument("directory", type=str, help="where to find the stage directory and %s. Defaults to '.'" % REPACKAGEYAML, default=".",nargs='?') + parser.add_argument("environfile", type=str, help="Optional environment file. Overrides $REPACKAGEENVFILE, defaults to /dev/null", default="/dev/null", nargs='?') + parser.add_argument("outputdirectory", type=str, help="Output directory. Defaults to 'output' under --directory path.", default=None, nargs='?') + parser.add_argument("verbose",help="turn on verbosity",nargs='?',default="true") + parser.add_argument("skipexecution",help="indcate packages and exit ",nargs='?',default="false") + parser.add_argument("skipbuild",help="skip actually bulding the packages",nargs='?',default="false") + parser.add_argument("usecache",help="if debian artifact already exists use it",nargs='?',default="false") + parser.add_argument("keeptempfiles",help="keep temp files at exit",nargs='?',default="false") + else: + parser.add_argument("-n", "--skipexecution", help="indicate the packages and exit", action="store_true") + parser.add_argument("-c", "--usecache", help="if a debian artifact already exists use it", action="store_true") + parser.add_argument("-N", "--skipbuild", help="skip actually building the packages", action="store_true") + parser.add_argument("-K", "--keeptempfiles", help="keep temp files at exit", action="store_true") + parser.add_argument("-v", "--verbose", help="turn on verbosity", action="store_true") + parser.add_argument("-b", "--packagetype", type=str, help="""The package-type may be specified multiple times or may use a ','-separated + or space-separated list. 'all' is an alias for all of them.""", required=True) + parser.add_argument("-u", "--upload", action="store_true", help="""Depending on package type -- docker or debian -- uploads the artifact to a remote repository. + For Docker, uses $DOCKERREGISTRY as the remote repository to push the image. + For Debian, uses $REPACKAGEDEBIANUPLOAD as the command, with {0} as the local path to the debian image, {1} as the image name with build number, + and optionally {2} as groupId (may be used as part of the directory path) and {3} as the image name without the build number.""") + parser.add_argument("-d", "--directory", type=str, help="where to find the stage directory and %s. Defaults to '.'" % REPACKAGEYAML, default=".") + parser.add_argument("-e", "--environfile", type=str, help="Optional environment file. Overrides $REPACKAGEENVFILE, defaults to /dev/null", default="/dev/null") + parser.add_argument("-o", "--outputdirectory", type=str, help="Output directory. Defaults to 'output' under --directory path.", default=None) + parser.add_argument("-y", "--repackageyaml", type=str, help="Name of parameter file. Defaults to '" + REPACKAGEYAML + "' or '" + REPACKAGEJSON + "' under --directory path.", default=REPACKAGEYAML) + parser.add_argument("-B", "--buildnumber", type=str, help="Build number. Defaults to $BUILD_NUMBER, which defaults to a date-based string.", default="") + + global args + args = parser.parse_args() + + # for some reason, the Jenkins branch leaves these as strings instead of the proper boolean values + args.upload = strToBool(args.upload) + args.verbose = strToBool(args.verbose) + args.skipexecution = strToBool(args.skipexecution) + args.skipbuild = strToBool(args.skipbuild) + args.usecache = strToBool(args.usecache) + args.keeptempfiles = strToBool(args.keeptempfiles) + + # check the -e/$REPACKAGEENVFILE value + if args.environfile == "": + if os.environ.get("REPACKAGEENVFILE") is not None: + args.environfile = os.environ["REPACKAGEENVFILE"] + if not os.path.isfile(args.environfile) and args.environfile != "/dev/null": + die("-e / $REPACKAGEENVFILE must be a file that can be sourced by the shell") + if not args.environfile.startswith("/"): + args.environfile = os.getcwd() + "/" + args.environfile + + allPackages = [ "debian", + "docker" ] + args.builds = { } + for pkg in allPackages: + args.builds[pkg] = False + if args.packagetype == "all": + args.packagetype = ",".join(allPackages) + for build in re.split("[, \t]", args.packagetype): + args.builds[build] = True + + if args.upload and args.builds["debian"]: + if os.environ.get("REPACKAGEDEBIANUPLOAD") is None: + die("-u requires $REPACKAGEDEBIANUPLOAD to be set when building debian") + elif not re.search("[{]0[}]", os.environ.get("REPACKAGEDEBIANUPLOAD")): + die("$REPACKAGEDEBIANUPLOAD is missing {0}") + elif not re.search("[{][13][}]", os.environ.get("REPACKAGEDEBIANUPLOAD")): + die("$REPACKAGEDEBIANUPLOAD is missing either {1} or {3}") + + if args.upload and args.builds["docker"] and os.environ.get("DOCKERREGISTRY") is None: + die("-u requires $DOCKERREGISTRY to be set when building docker") + + if not os.path.isdir(args.directory): + die("The root directory %s does not exist" % args.directory) + if not args.directory.startswith("/"): + args.directory = os.getcwd() + "/" + args.directory + if args.repackageyaml != REPACKAGEYAML: + if not os.path.exists(args.directory + "/" + args.repackageyaml): + die("The file %s/%s does not exist" % (args.directory, args.repackageyaml)) + else: + if os.path.exists(args.directory + "/" + REPACKAGEYAML): + args.repackageyaml = REPACKAGEYAML + elif os.path.exists(args.directory + "/" + REPACKAGEJSON): + args.repackageyaml = REPACKAGEJSON + else: + die("Either %s/%s or %s/%s must exist" % (args.directory, args.repackageyaml, args.directory, args.repackagejson)) + + if args.outputdirectory is None: + args.outputdirectory = args.directory + "/output" + else: + if not args.outputdirectory.startswith("/"): + args.outputdirectory = os.getcwd() + "/" + args.outputdirectory + if not os.path.isdir(args.outputdirectory): + die("The specified --outputdirectory %s does not exist" % args.outputdirectory) + + # establish some global variables used everywhere + global ROOTDIR, TMPROOT + ROOTDIR = args.directory + TMPROOT = args.directory + "/tmp" + + # and cd to our ROOTDIR + cdCheck(ROOTDIR) + + # unless -K is specified, remove any temp files at the end + if not args.keeptempfiles: + atexit.register(cleanupTmpRoot) + + # grab and share some variables that are used by lots of build functions + global APPL, MAINTAINER, VER, BNBR + APPL = getParam( '["applicationName"]' ) + MAINTAINER = getParam( '["maintainer"]' ) + VER = getParam( '["version"]' ) + BNBR = args.buildnumber if args.buildnumber != "" else os.environ.get("BUILD_NUMBER") if os.environ.get("BUILD_NUMBER") is not None else time.strftime("%Y%m%d%H%M%S") + + # build whatever was requested + if args.builds["docker"]: + buildDocker() + if args.builds["debian"]: + buildDebian() + +if __name__ == "__main__": + main() |