Moving all files to root directory

Change-Id: Ica5535fd6ec85f350fe1640b42137b49f83f10f0
Signed-off-by: Patrick Brady <pb071s@att.com>

2 files changed, 815 insertions, 0 deletions

diff --git a/appc-common/src/main/resources/org/openecomp/appc/i18n/MessageResources.properties b/appc-common/src/main/resources/org/openecomp/appc/i18n/MessageResources.properties
new file mode 100644
index 000000000..0c571cbae
--- /dev/null
+++ b/appc-common/src/main/resources/org/openecomp/appc/i18n/MessageResources.properties
@@ -0,0 +1,792 @@
+###
+# ============LICENSE_START=======================================================
+# openECOMP : APP-C
+# ================================================================================
+# Copyright (C) 2017 AT&T Intellectual Property. All rights
+# 						reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+# 
+#      http://www.apache.org/licenses/LICENSE-2.0
+# 
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+###
+
+# This property file contains all message definitions used by APPC
+#
+# Message resources are identified by a key, which is defined in the Msg enumeration.  This key is
+# assigned a value which consists of 4 parts separated by a pipe (|) symbol.  These parts are:
+#
+# 1. The message identifier
+# 2. The Message text to be formatted and issued to the user
+# 3. The suggested resolution text, how to fix the problem.
+# 4. The description text, what is the problem so the user can understand
+#
+CONFIGURATION_STARTED=APPC0001I|\
+  ECOMP Application Controller (APP-C) initialization started at {0}|\
+  No resolution is required, this is an informational message|\
+  The APP-C component configuration has been started because the component is being \
+    initialized or loaded for the first time, or a new instance of the component is \
+    being created.  This message indicates that the component is starting.
+
+CONFIGURATION_CLEARED=APPC0002I|\
+  All prior configuration has been cleared|\
+  No resolution is required, this is an informational message|\
+  The APP-C component is being started or restarted and any prior configuration \
+    (if present), is cleared.  This is normal.
+
+LOADING_CONFIGURATION_OVERRIDES=APPC0003I|\
+  Loading configuration properties from file "{0}"|\
+  No resolution is required, this is an informational message|\
+  This message indicates that the configuration of the APP-C component was located \
+    and is being loaded from the specified file.
+
+LOADING_DEFAULTS=APPC0004I|\
+  Configuration defaults loaded from resource file "{0}"|\
+  No resolution is required, this is an informational message|\
+  This is a normal indication that the default configuration settings were loaded \
+    from the resource file.  The APP-C components load a default configuration first \
+    so that all configuration values have valid default settings.  Any user configuation \
+    that may be specified then overrides these defaults.
+
+NO_DEFAULTS_FOUND=APPC0005E|\
+  No default property resource "{0}" was found!|\
+  This is an internal error.  Contact support.|\
+  This is an internal error that indicates that the default resource property file \
+    could not be located.  This is likely a packaging error and is indicative of \
+    a construction problem.  Refer this to development or level 3 support for assistance.
+
+PROPERTY_VALUE=APPC0006I|\
+  Property "{0}" ="{1}"|\
+  No resolution is required, this is an informational message|\
+  This message is issued to show the value of configuration properties and is used to \
+    debug start up of the component.
+
+NO_OVERRIDE_PROPERTY_FILE_LOADED=APPC0007E|\
+  No configuration file named [{0}] was found on the configuration search path [{1}]. \
+    If a configuration file should have been loaded, check the file name and search \
+    path specified.  APPC will proceed using the default values and command-line \
+    overrides (if any).|\
+  If a configuration file was expected, verify the file name and that it exists on \
+    the search path for the configuration properties.  The search path defaults to \
+    <em>&#36;{user.home},/opt/app/appc/etc,etc,../etc,/etc,.</em> and can be overridden \
+    by specification of the property <em>org.openecomp.appc.bootstrap.path</em>.  The \
+    property file name defaults to <em>appc.properties</em> and can also be \
+    overridden by the <em>org.openecomp.appc.bootstrap.file</em> property.|\
+  This message indicates that the bootstrap path was searched for the bootstrap \
+    property file (a file that can be supplied to configure APPC) and that no file \
+    with the specified name was found on any of the path elements of the path.
+
+SEARCHING_CONFIGURATION_OVERRIDES=APPC0008I|\
+  Searching path "{0}" for configuration settings "{1}"|\
+  No resolution is required|\
+  This message indicates that the specified path is being examined for a configuration \
+    file of the indicated name.  The configuration file defaults to <em>appc.properties</em> \
+    but can be overridden by specification of the <em>org.openecomp.appc.bootstrap.file</em> \
+    property (using a command-line override, for example).  This message is intended to \
+    assist in the debugging and analysis of configuration issues where the indicated \
+    file may not be processed or found.  The path that is searched is a comma-delimited \
+    list of directories and defaults to <em>&#36;{user.home},/opt/app/appc/etc,etc,../etc,/etc,.</em> \
+    but can also be overridden by specification of the <em>org.openecomp.appc.bootstrap.path</em> \
+    property.
+
+LOADING_APPLICATION_OVERRIDES=APPC0009I|\
+  Loading application-specific override properties|\
+  No resolution required|\
+  This message indicates that the APPC component was invoked as an embedded component \
+    and that the caller has supplied an override property object.
+
+NO_APPLICATION_OVERRIDES=APPC0010I|\
+  No application-specific override properties were provided!|\
+  No resolution required|\
+  This message indicates that the APPC component was invoked as an embedded component \
+    and that the caller has supplied an override property object, but that object was \
+    empty.
+
+MERGING_SYSTEM_PROPERTIES=APPC0011I|\
+  Merging system properties into configuration|\
+  No resolution is required|\
+  This message indicates that the java virtual machine system properties are being \
+    examined and merged into the APP-C component configuration.  This allows for command \
+    line specification of any APP-C configuration property as a standard java define \
+    JVM option (ex: -Dproperty=value).
+
+SETTING_SPECIAL_PROPERTY=APPC0012I|\
+  Setting property "{0}={1}" in system properties|\
+  No resolution required.|\
+  This message indicates that the specified property loaded from defaults, property \
+    file overrides, application overrides, or command-line overrides is being placed \
+    in the system (java virtual machine) properties object.  Some libraries that may \
+    be integrated with APP-C (for example, DME2 or AFT libraries) may only look for \
+    their properties in the system properties object.  This allows those components \
+    to be configured from the APP-C configuration.
+
+LOADING_RESOURCE_BUNDLE=APPC0013I|\
+  Loading resource bundle "{0}"|\
+  No resolution required|\
+  This message indicates that the specified resource bundle is being loaded.
+
+LOGGING_ALREADY_INITIALIZED=APPC0014W|\
+  Logging has already been initialized, check the container logging definitions to ensure \
+    they represent your desired logging configuration.|\
+  If logging is configured incorrectly, move the definitions to the container or component \
+    that first initialized logging.  If they are ok, no resolution is required.|\
+  This message indicates that the logging environment already exists and has been configured.
+
+SEARCHING_LOG_CONFIGURATION=APPC0015I|\
+  Searching path "{0}" for log configuration file "{1}"|\
+  No resolution is required|\
+  This message indicates that the APP-C component configuration file specified a logging \
+    configuration file and/or search path and the path is being searched.  This is used to \
+    assist in debugging the configuration process.
+
+LOADING_DEFAULT_LOG_CONFIGURATION=APPC0016I|\
+  Loading default logging configuration from system resource file "{0}"|\
+  No resolution is required|\
+  A default logging configuration for the component is loaded from system resources to \
+    ensure that a valid logging environment exists.  This is a normal message, and will \
+    be followed by APPC0019I if a user-specified logging configuration overrides the \
+    defaults.
+
+NO_LOG_CONFIGURATION=APPC0017E|\
+  No log configuration could be found or defaulted!|\
+  A valid logging configuration cannot be found, and no default configuration resource \
+    was loaded.  This is likely a packaging issue and should be referred to development \
+    or level 3 support for assistance.|\
+  This is an internal error.
+
+UNSUPPORTED_LOGGING_FRAMEWORK=APPC0018E|\
+  An unsupported logging framework is bound to SLF4J.  Only Logback or Log4J are supported.|\
+  This is a compatibility error with logging frameworks used in the application environment \
+    and should be referred to development or level 3 support for assistance.|\
+  This is an internal error.
+
+LOADING_LOG_CONFIGURATION=APPC0019I|\
+  Loading logging configuration from file "{0}"|\
+  No resolution is required|\
+  The specified logging configuration is being loaded.
+
+UNKNOWN_PROVIDER=APPC0020E|\
+  Provider {0} cannot be found or cannot be resolved to one of the known providers, [{1}].|\
+  Specify the name of a valid provider. The IAAS adapter contains a set of providers \
+    that are defined.  Each of these providers is assigned a logical name.  The call \
+    to the IAAS adapter must specify the name of the provider that is desired.  This \
+    could be the result of an incorrect call, or the IAAS adapter configuration is \
+    wrong.|\
+  The APP-C IAAS adapter is being called to request a service on a specific provider, but \
+    the name of the provider cannot be found in the list of defined providers.  This may \
+    be an error in the directed graph that contains the call to the IAAS adapter, or it \
+    may be an error in the request, or the configuration of the IAAS adapter may need \
+    to be updated.
+
+SERVER_STATE_CHANGE_TIMEOUT=APPC0021E|\
+  Server name "{0}" with id "{1}" in tenant "{2}" and region "{3}" did not change state \
+    within the alloted time. Current state is "{4}" and the desired state(s) are "{5}"|\
+  This is likely a provider issue.  If the provider is OpenStack, check the virtual \
+    machine on the horizon dashboard.  If the machine is in an invalid state, you may \
+    need to contact Openstack support.  The exact mechanisms for recovery of a machine \
+    in an invalid state are varied and will be different from provider to provider.|\
+  This message indicates that the IAAS adapter has performed some requested action \
+    on the specified server (virtual machine) but the server did not enter a valid \
+    state (running, stopped, etc) within the timeout period.  The last state (current state) \
+    is shown, as well as the state that was expected.  The servers name, UUID, containing \
+    tenant, and region are shown so that the correct provider can be examined.
+
+SERVER_DELETED=APPC0022E|\
+  Server name "{0}" with id "{1}" in tenant "{2}" has a state of deleted and cannot be {3}.|\
+  The specified server has been deleted on the provider.  This is likely an incorrect \
+    request.  Make sure that you are specifying the correct server ID/name, provider, \
+    and region.  If the self-link URL is used, make sure that the correct server resource \
+    is specified.  If the machine was correct, recreate or rebuild the machine to make \
+    it usable.  Correct the request.|\
+  This message indicates that the server specified was found to have been deleted in the \
+    target provider and that the requested action cannot be performed.  This may be caused \
+    by several things:\
+    <ol>\
+      <li>The UUID of the server is wrong and specifies a machine that no longer exists</li>\
+      <li>The machine was deleted by a different process or request</li>\
+      <li>The wrong provider was requested</li>\
+      <li>The request was out-of-order</li>\
+    </ol>
+
+UNKNOWN_SERVER_STATE=APPC0023E|\
+  Server name "{0}" with id "{1}" in tenant "{2}" has an unknown state of "{3}".|\
+  Check the machine to determine the state of the machine.  Correct that state to a valid \
+    state if possible.  This may also be caused by an internal error in the PAL (Provider \
+    Abstraction Layer) used by the IAAS if a new state definition has been added to the \
+    provider (such as a new version or the installation of an unknown or unsupported \
+    extension).  If the machine's state is valid, refer this error to development or \
+    level 3 support for assistance.|\
+  This message indicates that a request was made to the IAAS adapter to take some action \
+    on the specified virtual machine, but the machine was found to be in a state that \
+    prevents that action from being performed.
+
+COMPONENT_INITIALIZING=APPC0024I|\
+  {0} component {1} is being initialized...|\
+  No resolution needed|\
+  The IAAS adapter is being initialized
+
+COMPONENT_INITIALIZED=APPC0025I|\
+  {0} component {1} has completed initialization|\
+  No resolution needed|\
+  The IAAS adapter has been initialized
+
+COMPONENT_TERMINATING=APPC0026I|\
+  {0} component {1} is terminating...|\
+  No resolution needed|\
+  The IAAS adapter is being terminated
+
+COMPONENT_TERMINATED=APPC0027I|\
+  {0} component {1} has terminated|\
+  No resolution needed|\
+  The IAAS adapter has been terminated
+
+IAAS_ADAPTER_UNSUPPORTED_OPERATION=APPC0028E|\
+  Operation {0} is not supported or implemented at this time.|\
+  Change the request to a supported operation|\
+  The IAAS adapter has been requested to perform some operation that it cannot \
+    perform at this time.
+
+IAAS_ADAPTER_RPC_CALLED=APPC0029I|\
+  Operation [{0}] called.  Input document:\n{1}|\
+  No resolution required|\
+  The IAAS adapter operation indicated was called with the requested input \
+    parameters.
+
+NO_SERVICE_FOUND=APPC0030E|\
+  Unable to locate the [{0}] service in the OSGi container|\
+  Ensure that the feature containing that service is installed and running|\
+  This indicates that the required feature could not be located
+
+CONTEXT_PARAMETERS_DISPLAY=APPC0031I|\
+  Dump of context parameters for module [{0}], RPC [{1}], and version [{2}]|\
+  No resolution required|\
+  The specified RPC is being called and the context properties are being \
+    displayed.  This is a debugging message and preceeds the display of \
+    each context property.
+
+RESPONSE_PARAMETERS_DISPLAY=APPC0032I|\
+  Response properties from execution of module [{0}], RPC [{1}], and version [{2}] are:|\
+  No resolution required|\
+  The service logic directed graph has been executed and returned the response properties. \
+  This message preceeds the dump of the response properties.  It is used for debugging \
+  of service logic and execution problems.
+
+NULL_OR_INVALID_ARGUMENT=APPC0033E|\
+  Service {0}:{1} was provided a null (empty) or invalid argument, [{2}] = [{3}]|\
+  This is likely an internal error, refer to support for assistance|\
+  The indicated service was called, but the specified parameter or argument was either \
+    null or empty, or it was invalid.  If it has a value, the value is shown.  If the \
+    value is null, the value is shown as 'null'.
+
+PROCESSING_REQUEST=APPC0034I|\
+  Service {0}:{1} is processing service [{2}] with request id [{3}]|\
+  No resolution required|\
+  The indicated application and RPC is processing the specified service request.
+
+INVALID_SERVICE_REQUEST=APPC0035E|\
+  Service {0}:{1} received request for service [{2}] but that service is invalid or unknown.|\
+  Correct the service request, likely a directed graph issue|\
+  The RPC was invoked to process a service request, but the service is not valid.
+
+REGISTERING_SERVICE=APPC0036I|\
+  {0} registering service {1} using class {2}|\
+  No resolution required|\
+  The indicated application service is registering itself with the OSGi container using the \
+    indicated java class name.
+
+UNREGISTERING_SERVICE=APPC0037I|\
+  {0} unregistering service {1}|\
+  No resolution required|\
+  The application service is being unregistered from the OSGi container services list.
+
+LOADING_PROVIDER_DEFINITIONS=APPC0038I|\
+  {0} IAAS Adapter initializing provider {1} as {2}|\
+  No resolution is required|\
+  The IAAS adapter is loading the definition of the specified provider from its \
+    configuration file.
+
+RESTARTING_SERVER=APPC0039I|\
+  {0} IAAS Adapter restart of server requested|\
+  No resolution required|\
+  A graph has invoked the IAAS adapter and has requested the restart of a server.  The \
+    properties that govern the request are echoed immediately following this message.
+
+REBUILDING_SERVER=APPC0040I|\
+  {0} IAAS Adapter rebuild of server requested|\
+  No resolution required|\
+  A graph has invoked the IAAS adapter and has requested the rebuilding of a server.  The \
+    properties that govern the request are echoed immediately following this message.
+
+INVALID_SELF_LINK_URL=APPC0041E|\
+  {0} IAAS Adapter cannot perform requested service, VM url [{1}] is invalid|\
+  Correct the call to the adapter with a valid self-link URL|\
+  The IAAS adapter has been called to perform some operation on a virtual machine \
+    but the vm_id of the virtual machine is not valid.
+
+SERVER_FOUND=APPC0042I|\
+  Located server {0} on tenant [{1}] and in state [{2}]|\
+  No resolution required|\
+  This message indicates that a service request was made to perform some action on the server \
+    and the indicated server was located on the specified tenant.\
+
+
+STACK_FOUND=APPC0042I|\
+  Located stack {0} on tenant [{1}] and in state [{2}]|\
+  No resolution required|\
+  This message indicates that a service request was made to perform some action on the server \
+    and the indicated server was located on the specified tenant.
+
+
+
+SERVER_NOT_FOUND=APPC0043E|\
+  No server found in provider with self-link URL [{0}]|\
+  Correct the server URL|\
+  The requested server, identified by its self link URL, could not be found in the provider
+
+SERVER_OPERATION_EXCEPTION=APPC0044E|\
+  Exception {0} was caught attempting {1} of server [{2}] on tenant [{3}]|\
+  Contact support for assistance|\
+  An exception was caught while trying to perform the indicated operation on the server. The \
+    exception may yield more information about the cause of the error.  This may be because \
+    of access security, or the server is in an invalid state, or any number of reasons.  This \
+    message should be referred to support for assistance.
+
+
+STACK_NOT_FOUND=APPC0043E|\
+  No stack found in provider with self-link URL [{0}]|\
+  Correct the server URL|\
+  The requested stack, identified by its self link URL, could not be found in the provider
+
+STACK_OPERATION_EXCEPTION=APPC0044E|\
+  Exception {0} was caught attempting {1} of server [{2}] on tenant [{3}]|\
+  Contact support for assistance|\
+  An exception was caught while trying to perform the indicated operation on the stack. The \
+    exception may yield more information about the cause of the error.  This may be because \
+    of access security, or the stack is in an invalid state, or any number of reasons.  This \
+    message should be referred to support for assistance.
+
+MISSING_REQUIRED_PROPERTIES=APPC0045E|\
+  One or more properties for [{0}] are missing, null, or empty.  They are:|\
+  A request to execute the adapter indicated was made from a directed graph, but the properties \
+    of the request that are required by the adapter are missing or do not have a value.  Correct \
+    the directed graph to supply the missing properties.|\
+  The specified properties for the indicated adapter operation are invalid or missing.
+
+SERVER_ERROR_STATE=APPC0046E|\
+  The server [{0}] (id={1}) in tenant {2} is in error state, {3} is not allowed|\
+  Destroy and recreate the instance|\
+  A request to restart or rebuild a server in an error state was received, but those operations \
+    are not allowed on a server in this state.  OpenStack only allows a deletion of a server \
+    that is in the error state.
+
+IMAGE_NOT_FOUND=APPC0047E|\
+  The image {0} could not be located for {1}.|\
+  The image indicated could not be found.  If the operation being requested is a rebuild of \
+    a server, then there is no action that can be taken other than to destroy the server and \
+    rebuild it using an image that exists.|\
+  This is likely caused by an image being deleted after it was used to build a server.  If the \
+    request is for a server rebuild, then the image used to create the server was later deleted \
+    and no longer exists.  The server cannot be rebuilt, because the image doesnt exist. \
+    The server must be deleted and reconstructed using a valid, existing image.
+
+STATE_CHANGE_TIMEOUT=APPC0048E|\
+  Time out waiting for {0} with name {1} (and id {2}) to reach one of {3} states, current state is {4}|\
+  Recover the resource in whatever means is appropriate|\
+  The resource indicated (by name and id) was expected to change it's state (status) to one of the \
+    indicated expected states within a specified timeout but the resource did not complete the \
+    state change.  It's current state is also shown. This can be caused by any number of factors \
+    but is normally a problem or conflict within the IaaS provider (OpenStack).
+
+STATE_CHANGE_EXCEPTION=APPC0049E|\
+  Exception {0} waiting for {1} with name {2} (and id {3}) to reach one of {4} states, current state is {5}\n\
+    cause={6}|\
+  Recover the resource in whatever means is appropriate|\
+  The resource indicated (by name and id) was expected to change it's state (status) to one of the \
+    indicated expected states within a specified timeout but the resource did not complete the \
+    state change.  It's current state is also shown. This can be caused by any number of factors \
+    but is normally a problem or conflict within the IaaS provider (OpenStack).
+
+STOP_SERVER=APPC0050I|\
+  Server {0} is being stopped...|\
+  No recovery required|\
+  The processing being performed by APPC requires that the indicated server be stopped.
+
+START_SERVER=APPC0051I|\
+  Server {0} is being started...|\
+  No recovery required|\
+  The processing being performed by APPC requires that the indicated server be started.
+
+RESUME_SERVER=APPC0052I|\
+  Server {0} is being resumed...|\
+  No recovery required|\
+  The processing being performed by APPC requires that the indicated server be resumed from a suspended state.
+
+UNPAUSE_SERVER=APPC0053I|\
+  Server {0} is being unpaused...|\
+  No recovery required|\
+  The processing being performed by APPC requires that the indicated server be unpaused from a paused state.
+
+CONNECTION_FAILED_RETRY=APPC0054E|\
+  Connection to provider {0} at identity {1} using tenant name {2} (id {3}) failed, reason={4}, \
+    retrying in {5} seconds, attempt {6} of {7}.|\
+  The connection to the provider could not be obtained for the indicated reason.  The application \
+    controller will retry the attempt to connect to the provider a maximum number of times.  The \
+    message contains the amount of time the system will wait to retry the connection, and the \
+    current attempt and the maximum number of attempts.|\
+  Correct the cause of the connection failure as indicated by the reason.
+
+CONNECTION_FAILED=APPC0055E|\
+ Connection to provider {0} at service {1} failed after all retry attempts.|\
+ The connection to the named provider at the indicated service URL cannot be opened.  All \
+   retries have been exhausted.  The application controller is giving up on the connection and will \
+   fail the request.|\
+ Correct the cause of the connection failure as indicated by the reason(s) in previous APPC0054E \
+   messages.
+
+STOPPING_SERVER=APPC0056I|\
+  {0} IAAS Adapter stop server requested|\
+  No resolution required|\
+  A graph has invoked the IAAS adapter and has requested the server to be stopped.  The \
+    properties that govern the request are echoed immediately following this message.
+
+REBUILD_SERVER_FAILED=APPC0057E|\
+  Server {0} (id {1}) failed to rebuild, reason {2}|\
+  The server rebuild failed for the indicated reason. Correct the cause of the failure and \
+    rerun, if applicable.|\
+  The adapter has attempted to rebuild the indicated server but the rebuild request has \
+    been failed by the provider for some reason.  The reason returned by the provider is \
+    included in the message.
+
+PARAMETER_IS_MISSING=APPC0058E|\
+  Application {0} graph {1} response did not set the {2} parameter. This parameter is \
+    required for synchronization with the controller. Absence of this parameter is assumed \
+    to be a failure. Please correct the DG.|\
+  The indicated directed graph was called from the application controller but when the \
+    graph returned the indicated property was not defined in the return parameters.  The \
+    controller requires that property to be defined and set to a value that is used to \
+    inform the controller of the outcome of operations in the graph.  Failure to set \
+    the required parameter is assumed to be a failure regardless if the graph actually \
+    succeeded or not.|\
+  Correct the DG to set the specified parameter to a value that is expected and understood \
+    by the controller.
+
+PARAMETER_NOT_NUMERIC=APPC0059E|\
+  Application {0} graph {1} did not set parameter {2} to a valid numeric value ({3}). \
+    Please correct the DG.|\
+  The indicated directed graph was called by the application controller and the graph \
+    did set the specified property, however the property is not a valid numeric \
+    value.  The parameter is used to convey a numeric quantity and the controller \
+    cannot convert the value specified to a number. |\
+  Correct the DG.
+
+DG_FAILED_RESPONSE=APPC0060E|\
+  Application {0} graph {1} completed with failure: error code = {2}, message = {3}|\
+  The directed graph indicated was called by the application controller and when \
+    the graph returned, an error code was set indicating that the graph failed. This \
+    is a message that echoes the results of the graph, and shows the returned error \
+    code and message.|\
+  Correct the cause of the error.
+
+EXCEPTION_CALLING_DG=APPC0061E|\
+  Application {0} received exception {1} attempting to call graph {2}, exception \
+    message = {3}|\
+  The application controller attempted to call the service logic interpreter (SLI) \
+    to execute the indicated graph, but an exception was caught.  The class of the \
+    exception is shown, as is the message associated with the exception.  An \
+    abbreviated stack trace is also displayed to provide information as to the \
+    state of the thread at the time of the exception.|\
+  Correct the cause of the exception and rerun.
+
+GRAPH_NOT_FOUND=APPC0062E|\
+  Application {0} was unable to locate graph {1}|\
+  The application controller attempted to call the service logic interpreter (SLI) \
+    to execute the specified graph but the graph does not exist in the SLI database.|\
+  Correct the database and install the correct graph.
+
+DEBUG_GRAPH_RESPONSE_HEADER=APPC0063D|\
+  Application {0} graph {1} responded with {2} properties|\
+  This is a debugging message that is output immediately after the call to the \
+    directed graph and before any processing is performed to determine the success \
+    or failure of that call.  The heading is output prior to dumping all the parameters \
+    that were returned by the graph.|\
+  No recovery action is required.
+
+DEBUG_GRAPH_RESPONSE_DETAIL=APPC0064D|\
+  {0}:{1} - {2} = {3}|\
+  This is a debugging message that is output immediately after the call to the \
+    directed graph and before any processing is performed to determine the success \
+    or failure of that call.  This message is repeated for each parameter that \
+    exists in the return context from the graph.|\
+  No recovery action is required.
+
+INVALID_REQUIRED_PROPERTY=APPC0065E|\
+  Application {0} request "{1}" was supplied a property "{2}" with the value "{3}" \
+    that does not meet the required form(s):|\
+  This message indicates that the specified requested operation was passed the \
+    specific property named and the property value did not meet the expected \
+    format requirements.  For example, if the property is expected to be a \
+    numeric quantity and it contains alphabetic characters, or if it is expected \
+    to be a URL and it is not valid.  The message also contains a list of one \
+    or more regular expressions that were used to validate the input, and which \
+    supply the syntax required for the property.|\
+  Correct the property and retry.
+
+MIGRATING_SERVER=APPC066I|\
+  {0} IAAS Adapter migrate of server requested|\
+  No resolution required|\
+  A graph has invoked the IAAS adapter and has requested the migration of a server.  The \
+    properties that govern the request are echoed immediately following this message.
+
+EVACUATING_SERVER=APPC0067I|\
+  {0} IAAS Adapter evacuate of server requested|\
+  No resolution required|\
+  A graph has invoked the IAAS adapter and has requested the evacuation of a server.  The \
+    properties that govern the request are echoed immediately following this message.
+
+MIGRATE_SERVER_FAILED=APPC0068E|\
+  Server {0} (id {1}) failed to migrate during {2} phase, reason {3}|\
+  The server migration failed for the indicated reason. Correct the cause of the failure and \
+    rerun, if applicable.|\
+  The adapter has attempted to migrate the indicated server but the migration request has \
+    been failed by the provider for some reason.  The reason returned by the provider is \
+    included in the message.
+
+EVACUATE_SERVER_FAILED=APPC0069E|\
+  Server {0} (id {1}) failed to evacuate, reason {2}|\
+  The server evacuation failed for the indicated reason. Correct the cause of the failure and \
+    rerun, if applicable.|\
+  The adapter has attempted to evacuate the indicated server but the evacuation request has \
+    been failed by the provider for some reason.  The reason returned by the provider is \
+    included in the message.
+
+APPC_TOO_BUSY=APPC0080E|\
+  APP-C instance is too busy|\
+  The APP-C instance handles too many requests and cannot accept new ones as its internal \
+  execution queue is full. The problem can appear when the APP-C instance gets more requests \
+  than it can handle simultaneously.|\
+  Check the server KPIs for possible performance issues (e.g. insufficient memory, \
+  high network latency, slow responsiveness of southbound systems and so on) which can affect \
+  the system throughput.
+
+VF_SERVER_BUSY=APPC0081E|\
+  Concurrent access to server "{0}"|\
+  APP-C currently executes a command on the specified server and cannot accept yet another request \
+  for the same one.|\
+  Try to resubmit the request at later time.
+
+VF_ILLEGAL_COMMAND=APPC0082E|\
+  Server "{0}" does not support command "{1}" in the current state "{2}"|\
+  APP-C cannot perform the requested command on the server in the current state as no state transition \
+  is defined for that.|\
+  Contact support for assistance.
+
+VF_UNDEFINED_STATE=APPC0083E|\
+  Server "{0}" cannot handle command "{1}" because of its doubtful state|\
+  The resource has undefined working state as result of abnormal termination of a previous command.|\
+  Recover the resource in whatever means is appropriate.
+
+APPC_NO_RESOURCE_FOUND=APPC0084E|\
+  No resource found with ID "{0}" in A&AI system.|\
+  APP-C is unable to resolve the VF details given the instance ID.|\
+  Check whether the resource has been deleted (terminated) before.
+
+APPC_EXPIRED_REQUEST=APPC0085E|\
+  The request "{0}" for server "{1}" has exceeded its TTL limit of "{2}" seconds|\
+  The received expired event won't be handled by APP-C instance. Normally the problem might be \
+  related to asynchronous requests arriving to APP-C instance via DMaaP channel.|\
+  Try to submit a new request if still relevant.
+
+APPC_WORKFLOW_NOT_FOUND=APPC0086E|\
+  Workflow for vnfType = "{0}" and  command = "{1}" not found.|\
+  Unable to retrive Workflow related to mention VNF type and command.|\
+  Check provided VNF and Command details are correct.
+
+APPC_INVALID_INPUT=APPC0087E|\
+  Null vnfId and command provided|\
+  Request contains Null vnfId and command|\
+  Provided non-null VNF and Command details.
+
+APPC_AUDIT_MSG=APPC0090A|\
+  Operation "{0}" for VNF type "{1}" from Source "{2}" with RequestID "{3}" \
+  was started at "{4}" and ended at "{5}" with status code "{6}"|\
+  Audit detailed msg|\
+  Audit detailed msg.
+
+AAI_CONNECTION_FAILED=APPC0106E|\
+  APP-C is unable to communicate with A&AI|\
+  Connection to A&AI at service {0} failed after all retry attempts.|\
+  The connection to the A&AI at the indicated service URL cannot be opened. \
+  All retries have been exhausted. APP-C is giving up on the connection and will?\
+  reject the operation request.|\
+  .
+
+AAI_UPDATE_FAILED=APPC0107E|\
+  APP-C is unable to update COMPONENT_ID {0} to {1} for reason {2}|\
+  The update at the end of the operation wasn't performed as a result of \
+  A&AI communication failure or its internal error.|\
+  .
+
+AAI_GET_DATA_FAILED=APPC0108E|\
+  APP-C is unable to retrieve VF/VFC {0} data for Transaction ID?{1}?as a \
+  result of A&AI communication failure or its internal error.|\
+  Operation request will be rejected by APP-C|\
+  .
+
+AAI_CONNECTION_FAILED_RETRY=APPC0105W|\
+  A&AI at identity {0} using VNF_ID {1} failed, reason={2}, retrying in {3} seconds, attempt {4} of {5}.|\
+  The connection to the A&AI could not be obtained for the indicated reason. APP-C will retry to connect \
+  to the A&AI. The?message contains the retry delay, the current attempt and the maximum number of attempts.|\
+  Correct the cause of the connection failure as indicated by the reason.?
+
+AAI_DELETE_FAILED=APPC0114E|\
+  APP-C is unable to delete COMPONENT_ID {0} for reason {1}|\
+  The deletion at the end of the operation wasn't performed as a result of \
+  A&AI communication failure or its internal error.|\
+  .
+
+VNF_CONFIGURED=APPC0118I|\
+  VNF {0} is configured|\
+  No resolution is required, this is an informational message|\
+  The VNF configuration has been completed.
+
+VNF_CONFIGURATION_STARTED=APPC0116I|\
+  VNF {0} is being configured|\
+  No resolution is required, this is an informational message|\
+  The VNF configuration has been started
+
+VNF_CONFIGURATION_FAILED=APPC0119E|\
+  VNF {0} configuration failed for reason {1}|\
+  The configuration operation wasn't performed as a result of VNF communication failure or its internal error.|\
+  .
+
+VNF_TEST_STARTED=APPC0120I|\
+  VNF {0} is being tested|\
+  No resolution is required, this is an informational message|\
+  The VNF test has been started
+
+VNF_TESTED=APPC0121I|\
+  VNF {0} was tested|\
+  No resolution is required, this is an informational message|\
+  The VNF test has been completed
+
+VNF_TEST_FAILED=APPC0122E|\
+  VNF {0} test failed for reason {1}|\
+  The test operation wasn't performed as a result of VNF communication failure or its internal error.|\
+  .
+
+STOP_SERVER_FAILED=APPC0112E|\
+  Server {0} (id {1}) failed to stop during {2} phase, reason {3}|\
+  The server stop failed for the indicated reason. Correct the cause of the failure and \
+  rerun, if applicable.|\
+  The adapter has attempted to stop the indicated server but the stop request has \
+  been failed by the provider for some reason. The reason returned by the provider is \
+  included in the message.
+
+TERMINATE_SERVER_FAILED=APPC0113E|\
+  Server {0} (id {1}) failed to terminate during {2} phase, reason {3}|\
+  The server termination failed for the indicated reason. Correct the cause of the failure and \
+  rerun, if applicable.|\
+  The adapter has attempted to terminate the indicated server but the migration request has \
+  been failed by the provider for some reason. The reason returned by the provider is \
+  included in the message.
+
+TERMINATE_STACK_FAILED=APPC0113E|\
+  Server {0} (id {1}) failed to terminate during {2} phase, reason {3}|\
+  The server termination failed for the indicated reason. Correct the cause of the failure and \
+  rerun, if applicable.|\
+  The adapter has attempted to terminate the indicated server but the migration request has \
+  been failed by the provider for some reason. The reason returned by the provider is \
+  included in the message.
+
+TERMINATING_SERVER=APPC0114I|\
+  {0} IAAS Adapter?terminate server requested|\
+  No resolution required|\
+  A graph has invoked the IAAS adapter and has requested the server to be terminated. The \
+  properties that govern the request are echoed immediately following this message.
+
+
+TERMINATING_STACK=APPC0115I|\
+  {0} IAAS Adapter?terminate stack requested|\
+  No resolution required|\
+  A graph has invoked the IAAS adapter and has requested the server to be terminated. The \
+  properties that govern the request are echoed immediately following this message.
+
+TERMINATE_SERVER=APPC0116I|\
+  Server {0} is being?terminated...|\
+  No recovery required|\
+  The processing being performed by APPC requires that the indicated server be terminated.
+
+TERMINATE_STACK=APPC0117I|\
+  Stack {0} is being?terminated...|\
+  No recovery required|\
+  The processing being performed by APPC requires that the indicated server be terminated.
+
+MIGRATE_COMPLETE=APPC0118I|\
+  Migrate {0} finished with status {1}. Start Time: {2}. End Time: {3}. Request ID: {4}. Reason:{5}...|\
+  No resolution is required, this is an informational message|\
+  APP-C Migrate Operation has completed.
+
+RESTART_COMPLETE=APPC0119I|\
+  Restart {0} finished with status {1}. Start Time: {2}. End Time: {3}. Request ID: {4}. Reason:{5}...|\
+  No resolution is required, this is an informational message|\
+  APP-C Restart Operation has completed.
+
+REBUILD_COMPLETE=APPC0120I|\
+  Rebuild {0} finished with status {1}. Start Time: {2}. End Time: {3}. Request ID: {4}. Reason:{5}...|\
+  No resolution is required, this is an informational message|\
+  APP-C Rebuild Operation has completed.
+
+CLOSE_CONTEXT_FAILED=APPC0121E|\
+  Exception {0} was caught attempting to close provider context for {1}.|\
+  Contact support for assistance|\
+  An exception was caught while trying to close the provider context. The \
+    exception may yield more information about the cause of the error.  This may be because \
+    of access security, or the server is in an invalid state, or any number of reasons.  This \
+    message should be referred to support for assistance.
+
+SNAPSHOTING_STACK=APPC0122I|\
+  Stack {0} is being?snapshoted...|\
+  No resolution is required|\
+  Stack snapshot.
+
+STACK_SNAPSHOTED==APPC0123I|\
+  Stack {0} snapshoted, snapshot ID = [{1}].|\
+  No resolution is required|\
+  Stack snapshoted successfully.
+
+
+RESTORING_STACK=APPC0124I|\
+  Stack {0} is being?restored to snapshot {1}...|\
+  No resolution is required|\
+  Stack restore.
+
+STACK_RESTORED=APPC0125I|\
+  Stack {0} is restored to snapshot {1}.|\
+  No resolution is required|\
+  Stack restored successfully.
+
+MISSING_PARAMETER_IN_REQUEST=APPC0126E|\
+  Parameter {0} is missing in svc request of {1}.|\
+  Check DG node definition to pass missing parameter's value.|\
+  Node definition in DG missing indicated parameter value or value is incorrect, \
+  check the graph definition.
+
+CANNOT_ESTABLISH_CONNECTION=APPC0127E|\
+  Cannot establish connection to server {0} port {1} with user {2}.|\
+  Check server IP, port and user credentials.|\
+  Wrong data sent in request's payload.
+
+
+APPC_METRIC_MSG=APPC0128I|\
+  Operation "{0}" for VNF type "{1}" from Source "{2}" with RequestID "{3}" on "{4}" with action "{5}" \
+  ended in {6} ms with result "{7}"|\
+  No resolution is required, this is an informational message|\
+  This message indicates that the APPC logged some operation to metric
diff --git a/appc-common/src/main/resources/org/openecomp/appc/i18n/auth.properties b/appc-common/src/main/resources/org/openecomp/appc/i18n/auth.properties
new file mode 100644
index 000000000..bdb5af244
--- /dev/null
+++ b/appc-common/src/main/resources/org/openecomp/appc/i18n/auth.properties
@@ -0,0 +1,23 @@
+###
+# ============LICENSE_START=======================================================
+# openECOMP : APP-C
+# ================================================================================
+# Copyright (C) 2017 AT&T Intellectual Property. All rights
+# 						reserved.
+# ================================================================================
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+# 
+#      http://www.apache.org/licenses/LICENSE-2.0
+# 
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# ============LICENSE_END=========================================================
+###
+
+username=admin
+password=admin