From d4c5f6b933e2ba449cb1ddf39355f03affec9b53 Mon Sep 17 00:00:00 2001 From: Marco Platania Date: Thu, 2 Aug 2018 13:02:59 -0400 Subject: Cleanup ONAP installation via Heat - Remove all the parts of code related to deprecated configurations - Consolidate serv.sh scripts in a single one - Allow SO resolution via DNS (in addition to MSO) Change-Id: I6cabacdabaa3c5158ee101057738584922858fc9 Issue-ID: INT-526 Signed-off-by: Marco Platania --- boot/aaf_install.sh | 45 +------------- boot/aaf_serv.sh | 107 -------------------------------- boot/aai_install.sh | 31 +--------- boot/aai_serv.sh | 106 -------------------------------- boot/appc_install.sh | 31 +--------- boot/appc_serv.sh | 106 -------------------------------- boot/clamp_install.sh | 47 +------------- boot/clamp_serv.sh | 106 -------------------------------- boot/db_simpledemo_onap_org | 1 + boot/db_simpledemo_openecomp_org | 1 + boot/dcae2_install.sh | 10 +-- boot/dcae2_serv.sh | 129 --------------------------------------- boot/dns_install.sh | 31 +--------- boot/docker_key.txt | 1 - boot/mr_install.sh | 31 +--------- boot/mr_serv.sh | 124 ------------------------------------- boot/music_install.sh | 31 +--------- boot/music_serv.sh | 106 -------------------------------- boot/nbi_install.sh | 43 +------------ boot/nbi_serv.sh | 106 -------------------------------- boot/oof_install.sh | 47 +------------- boot/oof_serv.sh | 106 -------------------------------- boot/openo_install.sh | 45 +------------- boot/openo_serv.sh | 106 -------------------------------- boot/policy_install.sh | 31 +--------- boot/policy_serv.sh | 106 -------------------------------- boot/portal_install.sh | 32 +--------- boot/portal_serv.sh | 106 -------------------------------- boot/robot_install.sh | 46 +------------- boot/robot_serv.sh | 106 -------------------------------- boot/sdc_install.sh | 43 +------------ boot/sdc_serv.sh | 106 -------------------------------- boot/sdnc_install.sh | 31 +--------- boot/sdnc_serv.sh | 106 -------------------------------- boot/serv.sh | 106 ++++++++++++++++++++++++++++++++ boot/sms_install.sh | 45 +------------- boot/sms_serv.sh | 106 -------------------------------- boot/so_install.sh | 46 +------------- boot/so_serv.sh | 106 -------------------------------- boot/vid_install.sh | 31 +--------- boot/vid_serv.sh | 106 -------------------------------- 41 files changed, 149 insertions(+), 2607 deletions(-) delete mode 100644 boot/aaf_serv.sh delete mode 100644 boot/aai_serv.sh delete mode 100644 boot/appc_serv.sh delete mode 100644 boot/clamp_serv.sh delete mode 100644 boot/dcae2_serv.sh delete mode 100644 boot/docker_key.txt delete mode 100644 boot/mr_serv.sh delete mode 100644 boot/music_serv.sh delete mode 100644 boot/nbi_serv.sh delete mode 100644 boot/oof_serv.sh delete mode 100644 boot/openo_serv.sh delete mode 100644 boot/policy_serv.sh delete mode 100644 boot/portal_serv.sh delete mode 100644 boot/robot_serv.sh delete mode 100644 boot/sdc_serv.sh delete mode 100644 boot/sdnc_serv.sh create mode 100644 boot/serv.sh delete mode 100644 boot/sms_serv.sh delete mode 100644 boot/so_serv.sh delete mode 100644 boot/vid_serv.sh diff --git a/boot/aaf_install.sh b/boot/aaf_install.sh index c8531d55..171592ce 100644 --- a/boot/aaf_install.sh +++ b/boot/aaf_install.sh @@ -27,34 +27,6 @@ then cp /home/ubuntu/.ssh/authorized_keys /root/.ssh fi -# Set private IP in /etc/network/interfaces manually in the presence of public interface -# Some VM images don't add the private interface automatically, we have to do it during the component installation -if [[ $CLOUD_ENV == "openstack_nofloat" ]] -then - LOCAL_IP=$(cat /opt/config/local_ip_addr.txt) - CIDR=$(cat /opt/config/oam_network_cidr.txt) - BITMASK=$(echo $CIDR | cut -d"/" -f2) - - # Compute the netmask based on the network cidr - if [[ $BITMASK == "8" ]] - then - NETMASK=255.0.0.0 - elif [[ $BITMASK == "16" ]] - then - NETMASK=255.255.0.0 - elif [[ $BITMASK == "24" ]] - then - NETMASK=255.255.255.0 - fi - - echo "auto eth1" >> /etc/network/interfaces - echo "iface eth1 inet static" >> /etc/network/interfaces - echo " address $LOCAL_IP" >> /etc/network/interfaces - echo " netmask $NETMASK" >> /etc/network/interfaces - echo " mtu $MTU" >> /etc/network/interfaces - ifup eth1 -fi - # Download dependencies echo "deb http://ppa.launchpad.net/openjdk-r/ppa/ubuntu $(lsb_release -c -s) main" >> /etc/apt/sources.list.d/java.list echo "deb-src http://ppa.launchpad.net/openjdk-r/ppa/ubuntu $(lsb_release -c -s) main" >> /etc/apt/sources.list.d/java.list @@ -63,11 +35,12 @@ apt-get install --allow-unauthenticated -y apt-transport-https ca-certificates w # Download scripts from Nexus unzip -p -j /opt/boot-$ARTIFACTS_VERSION.zip aaf_vm_init.sh > /opt/aaf_vm_init.sh -unzip -p -j /opt/boot-$ARTIFACTS_VERSION.zip aaf_serv.sh > /opt/aaf_serv.sh +unzip -p -j /opt/boot-$ARTIFACTS_VERSION.zip serv.sh > /opt/aaf_serv.sh unzip -p -j /opt/boot-$ARTIFACTS_VERSION.zip imagetest.sh > /opt/imagetest.sh chmod +x /opt/imagetest.sh chmod +x /opt/aaf_vm_init.sh chmod +x /opt/aaf_serv.sh +sed -i "s|cmd=\"\"|cmd=\"./aaf_vm_init.sh\"|g" /opt/aaf_serv.sh mv /opt/aaf_serv.sh /etc/init.d update-rc.d aaf_serv.sh defaults @@ -115,8 +88,6 @@ chmod +x /opt/authz/auth/docker/dbuild.sh chmod +x /opt/authz/auth/docker/drun.sh chmod +x /opt/authz/auth/docker/dstart.sh chmod +x /opt/authz/auth/docker/dstop.sh -# d.props is not a startable shell -# chmod +x /opt/authz/auth/docker/d.props #Update maven settings cat > /usr/share/maven/conf/settings.xml << EOF @@ -527,17 +498,5 @@ EOF cd /opt/authz mvn install -Dmaven.test.skip=true -# Rename network interface in openstack Ubuntu 16.04 images. Then, reboot the VM to pick up changes -if [[ $CLOUD_ENV != "rackspace" ]] -then - sed -i "s/GRUB_CMDLINE_LINUX=.*/GRUB_CMDLINE_LINUX=\"net.ifnames=0 biosdevname=0\"/g" /etc/default/grub - grub-mkconfig -o /boot/grub/grub.cfg - sed -i "s/ens[0-9]*/eth0/g" /etc/network/interfaces.d/*.cfg - sed -i "s/ens[0-9]*/eth0/g" /etc/udev/rules.d/70-persistent-net.rules - echo 'network: {config: disabled}' >> /etc/cloud/cloud.cfg.d/99-disable-network-config.cfg - echo "APT::Periodic::Unattended-Upgrade \"0\";" >> /etc/apt/apt.conf.d/10periodic - reboot -fi - cd /opt ./aaf_vm_init.sh diff --git a/boot/aaf_serv.sh b/boot/aaf_serv.sh deleted file mode 100644 index 597969bc..00000000 --- a/boot/aaf_serv.sh +++ /dev/null @@ -1,107 +0,0 @@ -#!/bin/sh -### BEGIN INIT INFO -# Provides: -# Required-Start: $remote_fs $syslog -# Required-Stop: $remote_fs $syslog -# Default-Start: 2 3 4 5 -# Default-Stop: 0 1 6 -# Short-Description: Start daemon at boot time -# Description: Enable service provided by daemon. -### END INIT INFO - -HTTP_PROXY=$(cat /opt/config/http_proxy.txt) -HTTPS_PROXY=$(cat /opt/config/https_proxy.txt) - -if [ $HTTP_PROXY != "no_proxy" ] -then - export http_proxy=$HTTP_PROXY - export https_proxy=$HTTPS_PROXY -fi - -dir="/opt" -cmd="./aaf_vm_init.sh" -user="root" - -name=`basename $0` -pid_file="/var/run/$name.pid" -stdout_log="/var/log/$name.log" -stderr_log="/var/log/$name.err" - -get_pid() { - cat "$pid_file" -} - -is_running() { - [ -f "$pid_file" ] && ps `get_pid` > /dev/null 2>&1 -} - -case "$1" in - start) - if is_running; then - echo "Already started" - else - echo "Starting $name" - cd "$dir" - if [ -z "$user" ]; then - sudo $cmd >> "$stdout_log" 2>> "$stderr_log" & - else - sudo -u "$user" $cmd >> "$stdout_log" 2>> "$stderr_log" & - fi - echo $! > "$pid_file" - if ! is_running; then - echo "Unable to start, see $stdout_log and $stderr_log" - exit 1 - fi - fi - ;; - stop) - if is_running; then - echo -n "Stopping $name.." - kill `get_pid` - for i in {1..10} - do - if ! is_running; then - break - fi - - echo -n "." - sleep 1 - done - echo - - if is_running; then - echo "Not stopped; may still be shutting down or shutdown may have failed" - exit 1 - else - echo "Stopped" - if [ -f "$pid_file" ]; then - rm "$pid_file" - fi - fi - else - echo "Not running" - fi - ;; - restart) - $0 stop - if is_running; then - echo "Unable to stop, will not attempt to start" - exit 1 - fi - $0 start - ;; - status) - if is_running; then - echo "Running" - else - echo "Stopped" - exit 1 - fi - ;; - *) - echo "Usage: $0 {start|stop|restart|status}" - exit 1 - ;; -esac - -exit 0 diff --git a/boot/aai_install.sh b/boot/aai_install.sh index 83450e3c..b238fd6e 100644 --- a/boot/aai_install.sh +++ b/boot/aai_install.sh @@ -27,45 +27,18 @@ then cp /home/ubuntu/.ssh/authorized_keys /root/.ssh fi -# Set private IP in /etc/network/interfaces manually in the presence of public interface -# Some VM images don't add the private interface automatically, we have to do it during the component installation -if [[ $CLOUD_ENV == "openstack_nofloat" ]] -then - LOCAL_IP=$(cat /opt/config/local_ip_addr.txt) - CIDR=$(cat /opt/config/oam_network_cidr.txt) - BITMASK=$(echo $CIDR | cut -d"/" -f2) - - # Compute the netmask based on the network cidr - if [[ $BITMASK == "8" ]] - then - NETMASK=255.0.0.0 - elif [[ $BITMASK == "16" ]] - then - NETMASK=255.255.0.0 - elif [[ $BITMASK == "24" ]] - then - NETMASK=255.255.255.0 - fi - - echo "auto eth1" >> /etc/network/interfaces - echo "iface eth1 inet static" >> /etc/network/interfaces - echo " address $LOCAL_IP" >> /etc/network/interfaces - echo " netmask $NETMASK" >> /etc/network/interfaces - echo " mtu $MTU" >> /etc/network/interfaces - ifup eth1 -fi - # Download dependencies apt-get update apt-get install -y apt-transport-https ca-certificates wget git ntp ntpdate make # Download scripts from Nexus unzip -p -j /opt/boot-$ARTIFACTS_VERSION.zip aai_vm_init.sh > /opt/aai_vm_init.sh -unzip -p -j /opt/boot-$ARTIFACTS_VERSION.zip aai_serv.sh > /opt/aai_serv.sh +unzip -p -j /opt/boot-$ARTIFACTS_VERSION.zip serv.sh > /opt/aai_serv.sh unzip -p -j /opt/boot-$ARTIFACTS_VERSION.zip imagetest.sh > /opt/imagetest.sh chmod +x /opt/imagetest.sh chmod +x /opt/aai_vm_init.sh chmod +x /opt/aai_serv.sh +sed -i "s|cmd=\"\"|cmd=\"./aai_vm_init.sh\"|g" /opt/aai_serv.sh mv /opt/aai_serv.sh /etc/init.d update-rc.d aai_serv.sh defaults diff --git a/boot/aai_serv.sh b/boot/aai_serv.sh deleted file mode 100644 index 09949bb9..00000000 --- a/boot/aai_serv.sh +++ /dev/null @@ -1,106 +0,0 @@ -#!/bin/sh -### BEGIN INIT INFO -# Provides: -# Required-Start: $remote_fs $syslog -# Required-Stop: $remote_fs $syslog -# Default-Start: 2 3 4 5 -# Default-Stop: 0 1 6 -# Short-Description: Start daemon at boot time -# Description: Enable service provided by daemon. -### END INIT INFO -HTTP_PROXY=$(cat /opt/config/http_proxy.txt) -HTTPS_PROXY=$(cat /opt/config/https_proxy.txt) - -if [ $HTTP_PROXY != "no_proxy" ] -then - export http_proxy=$HTTP_PROXY - export https_proxy=$HTTPS_PROXY -fi - -dir="/opt" -cmd="./aai_vm_init.sh" -user="root" - -name=`basename $0` -pid_file="/var/run/$name.pid" -stdout_log="/var/log/$name.log" -stderr_log="/var/log/$name.err" - -get_pid() { - cat "$pid_file" -} - -is_running() { - [ -f "$pid_file" ] && ps `get_pid` > /dev/null 2>&1 -} - -case "$1" in - start) - if is_running; then - echo "Already started" - else - echo "Starting $name" - cd "$dir" - if [ -z "$user" ]; then - sudo $cmd >> "$stdout_log" 2>> "$stderr_log" & - else - sudo -u "$user" $cmd >> "$stdout_log" 2>> "$stderr_log" & - fi - echo $! > "$pid_file" - if ! is_running; then - echo "Unable to start, see $stdout_log and $stderr_log" - exit 1 - fi - fi - ;; - stop) - if is_running; then - echo -n "Stopping $name.." - kill `get_pid` - for i in {1..10} - do - if ! is_running; then - break - fi - - echo -n "." - sleep 1 - done - echo - - if is_running; then - echo "Not stopped; may still be shutting down or shutdown may have failed" - exit 1 - else - echo "Stopped" - if [ -f "$pid_file" ]; then - rm "$pid_file" - fi - fi - else - echo "Not running" - fi - ;; - restart) - $0 stop - if is_running; then - echo "Unable to stop, will not attempt to start" - exit 1 - fi - $0 start - ;; - status) - if is_running; then - echo "Running" - else - echo "Stopped" - exit 1 - fi - ;; - *) - echo "Usage: $0 {start|stop|restart|status}" - exit 1 - ;; -esac - -exit 0 diff --git a/boot/appc_install.sh b/boot/appc_install.sh index c66b12a6..e871bfc1 100644 --- a/boot/appc_install.sh +++ b/boot/appc_install.sh @@ -26,45 +26,18 @@ then cp /home/ubuntu/.ssh/authorized_keys /root/.ssh fi -# Set private IP in /etc/network/interfaces manually in the presence of public interface -# Some VM images don't add the private interface automatically, we have to do it during the component installation -if [[ $CLOUD_ENV == "openstack_nofloat" ]] -then - LOCAL_IP=$(cat /opt/config/local_ip_addr.txt) - CIDR=$(cat /opt/config/oam_network_cidr.txt) - BITMASK=$(echo $CIDR | cut -d"/" -f2) - - # Compute the netmask based on the network cidr - if [[ $BITMASK == "8" ]] - then - NETMASK=255.0.0.0 - elif [[ $BITMASK == "16" ]] - then - NETMASK=255.255.0.0 - elif [[ $BITMASK == "24" ]] - then - NETMASK=255.255.255.0 - fi - - echo "auto eth1" >> /etc/network/interfaces - echo "iface eth1 inet static" >> /etc/network/interfaces - echo " address $LOCAL_IP" >> /etc/network/interfaces - echo " netmask $NETMASK" >> /etc/network/interfaces - echo " mtu $MTU" >> /etc/network/interfaces - ifup eth1 -fi - # Download dependencies apt-get update apt-get install -y apt-transport-https ca-certificates wget git ntp ntpdate make # Download scripts from Nexus unzip -p -j /opt/boot-$ARTIFACTS_VERSION.zip appc_vm_init.sh > /opt/appc_vm_init.sh -unzip -p -j /opt/boot-$ARTIFACTS_VERSION.zip appc_serv.sh > /opt/appc_serv.sh +unzip -p -j /opt/boot-$ARTIFACTS_VERSION.zip serv.sh > /opt/appc_serv.sh unzip -p -j /opt/boot-$ARTIFACTS_VERSION.zip imagetest.sh > /opt/imagetest.sh chmod +x /opt/imagetest.sh chmod +x /opt/appc_vm_init.sh chmod +x /opt/appc_serv.sh +sed -i "s|cmd=\"\"|cmd=\"./appc_vm_init.sh\"|g" /opt/appc_serv.sh mv /opt/appc_serv.sh /etc/init.d update-rc.d appc_serv.sh defaults diff --git a/boot/appc_serv.sh b/boot/appc_serv.sh deleted file mode 100644 index 6947b9f6..00000000 --- a/boot/appc_serv.sh +++ /dev/null @@ -1,106 +0,0 @@ -#!/bin/sh -### BEGIN INIT INFO -# Provides: -# Required-Start: $remote_fs $syslog -# Required-Stop: $remote_fs $syslog -# Default-Start: 2 3 4 5 -# Default-Stop: 0 1 6 -# Short-Description: Start daemon at boot time -# Description: Enable service provided by daemon. -### END INIT INFO -HTTP_PROXY=$(cat /opt/config/http_proxy.txt) -HTTPS_PROXY=$(cat /opt/config/https_proxy.txt) - -if [ $HTTP_PROXY != "no_proxy" ] -then - export http_proxy=$HTTP_PROXY - export https_proxy=$HTTPS_PROXY -fi - -dir="/opt" -cmd="./appc_vm_init.sh" -user="root" - -name=`basename $0` -pid_file="/var/run/$name.pid" -stdout_log="/var/log/$name.log" -stderr_log="/var/log/$name.err" - -get_pid() { - cat "$pid_file" -} - -is_running() { - [ -f "$pid_file" ] && ps `get_pid` > /dev/null 2>&1 -} - -case "$1" in - start) - if is_running; then - echo "Already started" - else - echo "Starting $name" - cd "$dir" - if [ -z "$user" ]; then - sudo $cmd >> "$stdout_log" 2>> "$stderr_log" & - else - sudo -u "$user" $cmd >> "$stdout_log" 2>> "$stderr_log" & - fi - echo $! > "$pid_file" - if ! is_running; then - echo "Unable to start, see $stdout_log and $stderr_log" - exit 1 - fi - fi - ;; - stop) - if is_running; then - echo -n "Stopping $name.." - kill `get_pid` - for i in {1..10} - do - if ! is_running; then - break - fi - - echo -n "." - sleep 1 - done - echo - - if is_running; then - echo "Not stopped; may still be shutting down or shutdown may have failed" - exit 1 - else - echo "Stopped" - if [ -f "$pid_file" ]; then - rm "$pid_file" - fi - fi - else - echo "Not running" - fi - ;; - restart) - $0 stop - if is_running; then - echo "Unable to stop, will not attempt to start" - exit 1 - fi - $0 start - ;; - status) - if is_running; then - echo "Running" - else - echo "Stopped" - exit 1 - fi - ;; - *) - echo "Usage: $0 {start|stop|restart|status}" - exit 1 - ;; -esac - -exit 0 diff --git a/boot/clamp_install.sh b/boot/clamp_install.sh index 24e95373..ffe4d14e 100644 --- a/boot/clamp_install.sh +++ b/boot/clamp_install.sh @@ -26,45 +26,18 @@ then cp /home/ubuntu/.ssh/authorized_keys /root/.ssh fi -# Set private IP in /etc/network/interfaces manually in the presence of public interface -# Some VM images don't add the private interface automatically, we have to do it during the component installation -if [[ $CLOUD_ENV == "openstack_nofloat" ]] -then - LOCAL_IP=$(cat /opt/config/local_ip_addr.txt) - CIDR=$(cat /opt/config/oam_network_cidr.txt) - BITMASK=$(echo $CIDR | cut -d"/" -f2) - - # Compute the netmask based on the network cidr - if [[ $BITMASK == "8" ]] - then - NETMASK=255.0.0.0 - elif [[ $BITMASK == "16" ]] - then - NETMASK=255.255.0.0 - elif [[ $BITMASK == "24" ]] - then - NETMASK=255.255.255.0 - fi - - echo "auto eth1" >> /etc/network/interfaces - echo "iface eth1 inet static" >> /etc/network/interfaces - echo " address $LOCAL_IP" >> /etc/network/interfaces - echo " netmask $NETMASK" >> /etc/network/interfaces - echo " mtu $MTU" >> /etc/network/interfaces - ifup eth1 -fi - # Download dependencies apt-get update apt-get install -y apt-transport-https ca-certificates wget git ntp ntpdate make # Download scripts from Nexus unzip -p -j /opt/boot-$ARTIFACTS_VERSION.zip clamp_vm_init.sh > /opt/clamp_vm_init.sh -unzip -p -j /opt/boot-$ARTIFACTS_VERSION.zip clamp_serv.sh > /opt/clamp_serv.sh +unzip -p -j /opt/boot-$ARTIFACTS_VERSION.zip serv.sh > /opt/clamp_serv.sh unzip -p -j /opt/boot-$ARTIFACTS_VERSION.zip imagetest.sh > /opt/imagetest.sh chmod +x /opt/imagetest.sh chmod +x /opt/clamp_vm_init.sh chmod +x /opt/clamp_serv.sh +sed -i "s|cmd=\"\"|cmd=\"./clamp_vm_init.sh\"|g" /opt/clamp_serv.sh mv /opt/clamp_serv.sh /etc/init.d update-rc.d clamp_serv.sh defaults @@ -103,21 +76,7 @@ service docker restart echo "nameserver "$DNS_IP_ADDR >> /etc/resolvconf/resolv.conf.d/head resolvconf -u -# Clone Gerrit repository +# Clone Gerrit repository and run docker containers cd /opt git clone -b $GERRIT_BRANCH --single-branch $CODE_REPO - -# Rename network interface in openstack Ubuntu 16.04 images. Then, reboot the VM to pick up changes -if [[ $CLOUD_ENV != "rackspace" ]] -then - sed -i "s/GRUB_CMDLINE_LINUX=.*/GRUB_CMDLINE_LINUX=\"net.ifnames=0 biosdevname=0\"/g" /etc/default/grub - grub-mkconfig -o /boot/grub/grub.cfg - sed -i "s/ens[0-9]*/eth0/g" /etc/network/interfaces.d/*.cfg - sed -i "s/ens[0-9]*/eth0/g" /etc/udev/rules.d/70-persistent-net.rules - echo 'network: {config: disabled}' >> /etc/cloud/cloud.cfg.d/99-disable-network-config.cfg - echo "APT::Periodic::Unattended-Upgrade \"0\";" >> /etc/apt/apt.conf.d/10periodic - reboot -fi - -# Run docker containers. For openstack Ubuntu 16.04 images this will run as a service after the VM has restarted ./clamp_vm_init.sh diff --git a/boot/clamp_serv.sh b/boot/clamp_serv.sh deleted file mode 100644 index 2c3a898a..00000000 --- a/boot/clamp_serv.sh +++ /dev/null @@ -1,106 +0,0 @@ -#!/bin/sh -### BEGIN INIT INFO -# Provides: -# Required-Start: $remote_fs $syslog -# Required-Stop: $remote_fs $syslog -# Default-Start: 2 3 4 5 -# Default-Stop: 0 1 6 -# Short-Description: Start daemon at boot time -# Description: Enable service provided by daemon. -### END INIT INFO -HTTP_PROXY=$(cat /opt/config/http_proxy.txt) -HTTPS_PROXY=$(cat /opt/config/https_proxy.txt) - -if [ $HTTP_PROXY != "no_proxy" ] -then - export http_proxy=$HTTP_PROXY - export https_proxy=$HTTPS_PROXY -fi - -dir="/opt" -cmd="./clamp_vm_init.sh" -user="root" - -name=`basename $0` -pid_file="/var/run/$name.pid" -stdout_log="/var/log/$name.log" -stderr_log="/var/log/$name.err" - -get_pid() { - cat "$pid_file" -} - -is_running() { - [ -f "$pid_file" ] && ps `get_pid` > /dev/null 2>&1 -} - -case "$1" in - start) - if is_running; then - echo "Already started" - else - echo "Starting $name" - cd "$dir" - if [ -z "$user" ]; then - sudo $cmd >> "$stdout_log" 2>> "$stderr_log" & - else - sudo -u "$user" $cmd >> "$stdout_log" 2>> "$stderr_log" & - fi - echo $! > "$pid_file" - if ! is_running; then - echo "Unable to start, see $stdout_log and $stderr_log" - exit 1 - fi - fi - ;; - stop) - if is_running; then - echo -n "Stopping $name.." - kill `get_pid` - for i in {1..10} - do - if ! is_running; then - break - fi - - echo -n "." - sleep 1 - done - echo - - if is_running; then - echo "Not stopped; may still be shutting down or shutdown may have failed" - exit 1 - else - echo "Stopped" - if [ -f "$pid_file" ]; then - rm "$pid_file" - fi - fi - else - echo "Not running" - fi - ;; - restart) - $0 stop - if is_running; then - echo "Unable to stop, will not attempt to start" - exit 1 - fi - $0 start - ;; - status) - if is_running; then - echo "Running" - else - echo "Stopped" - exit 1 - fi - ;; - *) - echo "Usage: $0 {start|stop|restart|status}" - exit 1 - ;; -esac - -exit 0 diff --git a/boot/db_simpledemo_onap_org b/boot/db_simpledemo_onap_org index fe1f4312..2bb5a332 100644 --- a/boot/db_simpledemo_onap_org +++ b/boot/db_simpledemo_onap_org @@ -111,6 +111,7 @@ dcae.api.simpledemo.onap.org. IN CNAME vm1.dcae.simpledemo.onap.org. ;MSO mso.api.simpledemo.onap.org. IN CNAME vm1.mso.simpledemo.onap.org. +so.api.simpledemo.onap.org. IN CNAME vm1.mso.simpledemo.onap.org. ;Policy policy.api.simpledemo.onap.org. IN CNAME vm1.policy.simpledemo.onap.org. diff --git a/boot/db_simpledemo_openecomp_org b/boot/db_simpledemo_openecomp_org index e3fa1f62..23409d11 100644 --- a/boot/db_simpledemo_openecomp_org +++ b/boot/db_simpledemo_openecomp_org @@ -110,6 +110,7 @@ dcae.api.simpledemo.openecomp.org. IN CNAME vm1.dcae.simpledemo.openecomp.org. ;MSO mso.api.simpledemo.openecomp.org. IN CNAME vm1.mso.simpledemo.openecomp.org. +so.api.simpledemo.openecomp.org. IN CNAME vm1.mso.simpledemo.openecomp.org. ;Policy policy.api.simpledemo.openecomp.org. IN CNAME vm1.policy.simpledemo.openecomp.org. diff --git a/boot/dcae2_install.sh b/boot/dcae2_install.sh index 6446efa5..d0f5fd6e 100755 --- a/boot/dcae2_install.sh +++ b/boot/dcae2_install.sh @@ -52,11 +52,12 @@ apt-get install -y apt-transport-https ca-certificates wget git ntp ntpdate pyth # Download scripts from Nexus unzip -p -j /opt/boot-$ARTIFACTS_VERSION.zip dcae2_vm_init.sh > /opt/dcae2_vm_init.sh -unzip -p -j /opt/boot-$ARTIFACTS_VERSION.zip dcae2_serv.sh > /opt/dcae2_serv.sh +unzip -p -j /opt/boot-$ARTIFACTS_VERSION.zip serv.sh > /opt/dcae2_serv.sh unzip -p -j /opt/boot-$ARTIFACTS_VERSION.zip imagetest.sh > /opt/imagetest.sh chmod +x /opt/imagetest.sh chmod +x /opt/dcae2_vm_init.sh chmod +x /opt/dcae2_serv.sh +sed -i "s|cmd=\"\"|cmd=\"./dcae2_vm_init.sh\"|g" /opt/dcae2_serv.sh mv /opt/dcae2_serv.sh /etc/init.d update-rc.d dcae2_serv.sh defaults @@ -70,7 +71,6 @@ mkdir -p /opt/docker curl -L "https://github.com/docker/compose/releases/download/1.9.0/docker-compose-$(uname -s)-$(uname -m)" > /opt/docker/docker-compose chmod +x /opt/docker/docker-compose - # Set the MTU size of docker containers to the minimum MTU size supported by vNICs. OpenStack deployments may # need to know the external DNS IP DNS_FLAG="" @@ -103,19 +103,13 @@ echo "$(cat /opt/config/dcae_ip_addr.txt) dockerhost" >>/etc/hosts echo "nameserver $DNS_IP_ADDR" >> /etc/resolvconf/resolv.conf.d/head resolvconf -u - # prepare the configurations needed by DCAEGEN2 installer rm -rf /opt/app/config mkdir -p /opt/app/config - # private key sed -e 's/\\n/\n/g' /opt/config/priv_key | sed -e 's/^[ \t]*//g; s/[ \t]*$//g' > /opt/app/config/key chmod 777 /opt/app/config/key -# move keystone url file -#cp /opt/config/keystone_url.txt /opt/app/config/keystone_url.txt - - cd /opt ./dcae2_vm_init.sh diff --git a/boot/dcae2_serv.sh b/boot/dcae2_serv.sh deleted file mode 100644 index cfb77e45..00000000 --- a/boot/dcae2_serv.sh +++ /dev/null @@ -1,129 +0,0 @@ -#!/bin/sh -############################################################################# -# -# Copyright (c) 2017 AT&T Intellectual Property. All rights reserved. -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. -# -############################################################################# - -### BEGIN INIT INFO -# Provides: dcaegen2-bootstrap -# Required-Start: $remote_fs $syslog -# Required-Stop: $remote_fs $syslog -# Default-Start: 2 3 4 5 -# Default-Stop: 0 1 6 -# Short-Description: Start daemon at boot time -# Description: Enable service provided by daemon. -### END INIT INFO -HTTP_PROXY=$(cat /opt/config/http_proxy.txt) -HTTPS_PROXY=$(cat /opt/config/https_proxy.txt) - -if [ $HTTP_PROXY != "no_proxy" ] -then - export http_proxy=$HTTP_PROXY - export https_proxy=$HTTPS_PROXY -fi - -dir="/opt" -cmd="./dcae2_vm_init.sh" -user="root" - -name=$(basename "$0") -pid_file="/var/run/$name.pid" -stdout_log="/var/log/$name.log" -stderr_log="/var/log/$name.err" - -get_pid() { - cat "$pid_file" -} - -is_running() { - CID="$(docker ps | grep 'org.onap.dcaegen2.deployments.bootstrap')" - [ ! -z "$CID" ] -} - -case "$1" in - start) - if is_running; then - echo "Already started" - else - echo "Starting $name" - cd "$dir" - if [ -z "$user" ]; then - sudo $cmd >> "$stdout_log" 2>> "$stderr_log" & - else - sudo -u "$user" $cmd >> "$stdout_log" 2>> "$stderr_log" & - fi - echo $! > "$pid_file" - if ! is_running; then - echo "Unable to start, see $stdout_log and $stderr_log" - exit 1 - fi - fi - ;; - stop) - if is_running; then - echo -n "Stopping $name.." - kill "$(get_pid)" - CID=$(docker ps | grep 'nginx' | awk '{ print $1 }') - sudo docker stop "$CID" - - CID=$(docker ps | grep 'org.onap.dcaegen2.deployments.bootstrap' | awk '{ print $1 }') - docker exec -it "$CID" ./teardown.sh - for i in {1..10} - do - if ! is_running; then - break - fi - - echo -n "." - sleep 1 - done - echo - - if is_running; then - echo "Not stopped; may still be shutting down or shutdown may have failed" - exit 1 - else - echo "Stopped" - if [ -f "$pid_file" ]; then - rm "$pid_file" - fi - fi - else - echo "Not running" - fi - ;; - restart) - $0 stop - if is_running; then - echo "Unable to stop, will not attempt to start" - exit 1 - fi - $0 start - ;; - status) - if is_running; then - echo "Running" - else - echo "Stopped" - exit 1 - fi - ;; - *) - echo "Usage: $0 {start|stop|restart|status}" - exit 1 - ;; -esac - -exit 0 diff --git a/boot/dns_install.sh b/boot/dns_install.sh index 55b24958..1f940ac3 100644 --- a/boot/dns_install.sh +++ b/boot/dns_install.sh @@ -32,33 +32,6 @@ else OPTIONS_FILE="named.conf.options" fi -# Set private IP in /etc/network/interfaces manually in the presence of public interface -# Some VM images don't add the private interface automatically, we have to do it during the component installation -if [[ $CLOUD_ENV == "openstack_nofloat" ]] -then - LOCAL_IP=$(cat /opt/config/dns_ip_addr.txt) - CIDR=$(cat /opt/config/oam_network_cidr.txt) - BITMASK=$(echo $CIDR | cut -d"/" -f2) - - # Compute the netmask based on the network cidr - if [[ $BITMASK == "8" ]] - then - NETMASK=255.0.0.0 - elif [[ $BITMASK == "16" ]] - then - NETMASK=255.255.0.0 - elif [[ $BITMASK == "24" ]] - then - NETMASK=255.255.255.0 - fi - - echo "auto eth1" >> /etc/network/interfaces - echo "iface eth1 inet static" >> /etc/network/interfaces - echo " address $LOCAL_IP" >> /etc/network/interfaces - echo " netmask $NETMASK" >> /etc/network/interfaces - ifup eth1 -fi - # Download dependencies apt-get update apt-get install -y apt-transport-https ca-certificates wget bind9 bind9utils bind9-doc ntp ntpdate make @@ -70,12 +43,10 @@ unzip -p -j /opt/boot-$ARTIFACTS_VERSION.zip $ZONE_ONAP > /etc/bind/zones/db.sim unzip -p -j /opt/boot-$ARTIFACTS_VERSION.zip $OPTIONS_FILE > /etc/bind/named.conf.options unzip -p -j /opt/boot-$ARTIFACTS_VERSION.zip named.conf.local > /etc/bind/named.conf.local - - # Set the private IP address of each ONAP VM in the Bind configuration in OpenStack deployments if [[ $CLOUD_ENV != "rackspace" ]] then - sed -i "s/dns_forwarder/"$(cat /opt/config/dns_forwarder.txt)"/g" /etc/bind/named.conf.options + sed -i "s/dns_forwarder/"$(cat /opt/config/dns_forwarder.txt)"/g" /etc/bind/named.conf.options sed -i "s/dns_ip_addr/"$(cat /opt/config/dns_ip_addr.txt)"/g" /etc/bind/named.conf.options sed -i "s/external_dns/"$(cat /opt/config/external_dns.txt)"/g" /etc/bind/named.conf.options sed -i "s/aai1_ip_addr/"$(cat /opt/config/aai1_ip_addr.txt)"/g" /etc/bind/zones/db.simpledemo.openecomp.org diff --git a/boot/docker_key.txt b/boot/docker_key.txt deleted file mode 100644 index 9290b7c3..00000000 --- a/boot/docker_key.txt +++ /dev/null @@ -1 +0,0 @@ -58118E89F3A912897C070ADBF76221572C52609D diff --git a/boot/mr_install.sh b/boot/mr_install.sh index 152e67f8..b7573589 100644 --- a/boot/mr_install.sh +++ b/boot/mr_install.sh @@ -26,34 +26,6 @@ then cp /home/ubuntu/.ssh/authorized_keys /root/.ssh fi -# Set private IP in /etc/network/interfaces manually in the presence of public interface -# Some VM images don't add the private interface automatically, we have to do it during the component installation -if [[ $CLOUD_ENV == "openstack_nofloat" ]] -then - LOCAL_IP=$(cat /opt/config/local_ip_addr.txt) - CIDR=$(cat /opt/config/oam_network_cidr.txt) - BITMASK=$(echo $CIDR | cut -d"/" -f2) - - # Compute the netmask based on the network cidr - if [[ $BITMASK == "8" ]] - then - NETMASK=255.0.0.0 - elif [[ $BITMASK == "16" ]] - then - NETMASK=255.255.0.0 - elif [[ $BITMASK == "24" ]] - then - NETMASK=255.255.255.0 - fi - - echo "auto eth1" >> /etc/network/interfaces - echo "iface eth1 inet static" >> /etc/network/interfaces - echo " address $LOCAL_IP" >> /etc/network/interfaces - echo " netmask $NETMASK" >> /etc/network/interfaces - echo " mtu $MTU" >> /etc/network/interfaces - ifup eth1 -fi - # Download dependencies apt-get update apt-get install -y apt-transport-https ca-certificates wget make git ntp ntpdate @@ -61,11 +33,12 @@ apt-get install -y apt-transport-https ca-certificates wget make git ntp ntpdate # Download scripts from Nexus # a) scripts for message router (mr) unzip -p -j /opt/boot-$ARTIFACTS_VERSION.zip mr_vm_init.sh > /opt/mr_vm_init.sh -unzip -p -j /opt/boot-$ARTIFACTS_VERSION.zip mr_serv.sh > /opt/mr_serv.sh +unzip -p -j /opt/boot-$ARTIFACTS_VERSION.zip serv.sh > /opt/mr_serv.sh unzip -p -j /opt/boot-$ARTIFACTS_VERSION.zip imagetest.sh > /opt/imagetest.sh chmod +x /opt/imagetest.sh chmod +x /opt/mr_vm_init.sh chmod +x /opt/mr_serv.sh +sed -i "s|cmd=\"\"|cmd=\"./mr_vm_init.sh\"|g" /opt/mr_serv.sh mv /opt/mr_serv.sh /etc/init.d update-rc.d mr_serv.sh defaults diff --git a/boot/mr_serv.sh b/boot/mr_serv.sh deleted file mode 100644 index 9e324dc0..00000000 --- a/boot/mr_serv.sh +++ /dev/null @@ -1,124 +0,0 @@ - -############################################################################# -# -# Copyright © 2017 AT&T Intellectual Property. All rights reserved. -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. -# -############################################################################# - -#!/bin/sh -### BEGIN INIT INFO -# Provides: -# Required-Start: $remote_fs $syslog -# Required-Stop: $remote_fs $syslog -# Default-Start: 2 3 4 5 -# Default-Stop: 0 1 6 -# Short-Description: Start daemon at boot time -# Description: Enable service provided by daemon. -### END INIT INFO -HTTP_PROXY=$(cat /opt/config/http_proxy.txt) -HTTPS_PROXY=$(cat /opt/config/https_proxy.txt) - -if [ $HTTP_PROXY != "no_proxy" ] -then - export http_proxy=$HTTP_PROXY - export https_proxy=$HTTPS_PROXY -fi - -dir="/opt" -cmd="./mr_vm_init.sh" -user="root" - -name=`basename $0` -pid_file="/var/run/$name.pid" -stdout_log="/var/log/$name.log" -stderr_log="/var/log/$name.err" - -get_pid() { - cat "$pid_file" -} - -is_running() { - [ -f "$pid_file" ] && ps `get_pid` > /dev/null 2>&1 -} - -case "$1" in - start) - if is_running; then - echo "Already started" - else - echo "Starting $name" - cd "$dir" - if [ -z "$user" ]; then - sudo $cmd >> "$stdout_log" 2>> "$stderr_log" & - else - sudo -u "$user" $cmd >> "$stdout_log" 2>> "$stderr_log" & - fi - echo $! > "$pid_file" - if ! is_running; then - echo "Unable to start, see $stdout_log and $stderr_log" - exit 1 - fi - fi - ;; - stop) - if is_running; then - echo -n "Stopping $name.." - kill `get_pid` - for i in {1..10} - do - if ! is_running; then - break - fi - - echo -n "." - sleep 1 - done - echo - - if is_running; then - echo "Not stopped; may still be shutting down or shutdown may have failed" - exit 1 - else - echo "Stopped" - if [ -f "$pid_file" ]; then - rm "$pid_file" - fi - fi - else - echo "Not running" - fi - ;; - restart) - $0 stop - if is_running; then - echo "Unable to stop, will not attempt to start" - exit 1 - fi - $0 start - ;; - status) - if is_running; then - echo "Running" - else - echo "Stopped" - exit 1 - fi - ;; - *) - echo "Usage: $0 {start|stop|restart|status}" - exit 1 - ;; -esac - -exit 0 diff --git a/boot/music_install.sh b/boot/music_install.sh index f01e3551..84ba5629 100644 --- a/boot/music_install.sh +++ b/boot/music_install.sh @@ -26,45 +26,18 @@ then cp /home/ubuntu/.ssh/authorized_keys /root/.ssh fi -# Set private IP in /etc/network/interfaces manually in the presence of public interface -# Some VM images don't add the private interface automatically, we have to do it during the component installation -if [[ $CLOUD_ENV == "openstack_nofloat" ]] -then - LOCAL_IP=$(cat /opt/config/local_ip_addr.txt) - CIDR=$(cat /opt/config/oam_network_cidr.txt) - BITMASK=$(echo $CIDR | cut -d"/" -f2) - - # Compute the netmask based on the network cidr - if [[ $BITMASK == "8" ]] - then - NETMASK=255.0.0.0 - elif [[ $BITMASK == "16" ]] - then - NETMASK=255.255.0.0 - elif [[ $BITMASK == "24" ]] - then - NETMASK=255.255.255.0 - fi - - echo "auto eth1" >> /etc/network/interfaces - echo "iface eth1 inet static" >> /etc/network/interfaces - echo " address $LOCAL_IP" >> /etc/network/interfaces - echo " netmask $NETMASK" >> /etc/network/interfaces - echo " mtu $MTU" >> /etc/network/interfaces - ifup eth1 -fi - # Download dependencies apt-get update apt-get install -y apt-transport-https ca-certificates wget git ntp ntpdate make # Download scripts from Nexus unzip -p -j /opt/boot-$ARTIFACTS_VERSION.zip music_vm_init.sh > /opt/music_vm_init.sh -unzip -p -j /opt/boot-$ARTIFACTS_VERSION.zip music_serv.sh > /opt/music_serv.sh +unzip -p -j /opt/boot-$ARTIFACTS_VERSION.zip serv.sh > /opt/music_serv.sh unzip -p -j /opt/boot-$ARTIFACTS_VERSION.zip imagetest.sh > /opt/imagetest.sh chmod +x /opt/imagetest.sh chmod +x /opt/music_vm_init.sh chmod +x /opt/music_serv.sh +sed -i "s|cmd=\"\"|cmd=\"./music_vm_init.sh\"|g" /opt/music_serv.sh mv /opt/music_serv.sh /etc/init.d update-rc.d music_serv.sh defaults diff --git a/boot/music_serv.sh b/boot/music_serv.sh deleted file mode 100644 index 11b95a12..00000000 --- a/boot/music_serv.sh +++ /dev/null @@ -1,106 +0,0 @@ -#!/bin/sh -### BEGIN INIT INFO -# Provides: -# Required-Start: $remote_fs $syslog -# Required-Stop: $remote_fs $syslog -# Default-Start: 2 3 4 5 -# Default-Stop: 0 1 6 -# Short-Description: Start daemon at boot time -# Description: Enable service provided by daemon. -### END INIT INFO -HTTP_PROXY=$(cat /opt/config/http_proxy.txt) -HTTPS_PROXY=$(cat /opt/config/https_proxy.txt) - -if [ $HTTP_PROXY != "no_proxy" ] -then - export http_proxy=$HTTP_PROXY - export https_proxy=$HTTPS_PROXY -fi - -dir="/opt" -cmd="./music_vm_init.sh" -user="root" - -name=`basename $0` -pid_file="/var/run/$name.pid" -stdout_log="/var/log/$name.log" -stderr_log="/var/log/$name.err" - -get_pid() { - cat "$pid_file" -} - -is_running() { - [ -f "$pid_file" ] && ps `get_pid` > /dev/null 2>&1 -} - -case "$1" in - start) - if is_running; then - echo "Already started" - else - echo "Starting $name" - cd "$dir" - if [ -z "$user" ]; then - sudo $cmd >> "$stdout_log" 2>> "$stderr_log" & - else - sudo -u "$user" $cmd >> "$stdout_log" 2>> "$stderr_log" & - fi - echo $! > "$pid_file" - if ! is_running; then - echo "Unable to start, see $stdout_log and $stderr_log" - exit 1 - fi - fi - ;; - stop) - if is_running; then - echo -n "Stopping $name.." - kill `get_pid` - for i in {1..10} - do - if ! is_running; then - break - fi - - echo -n "." - sleep 1 - done - echo - - if is_running; then - echo "Not stopped; may still be shutting down or shutdown may have failed" - exit 1 - else - echo "Stopped" - if [ -f "$pid_file" ]; then - rm "$pid_file" - fi - fi - else - echo "Not running" - fi - ;; - restart) - $0 stop - if is_running; then - echo "Unable to stop, will not attempt to start" - exit 1 - fi - $0 start - ;; - status) - if is_running; then - echo "Running" - else - echo "Stopped" - exit 1 - fi - ;; - *) - echo "Usage: $0 {start|stop|restart|status}" - exit 1 - ;; -esac - -exit 0 diff --git a/boot/nbi_install.sh b/boot/nbi_install.sh index e05b1115..7705a25a 100644 --- a/boot/nbi_install.sh +++ b/boot/nbi_install.sh @@ -26,44 +26,17 @@ then cp /home/ubuntu/.ssh/authorized_keys /root/.ssh fi -# Set private IP in /etc/network/interfaces manually in the presence of public interface -# Some VM images don't add the private interface automatically, we have to do it during the component installation -if [[ $CLOUD_ENV == "openstack_nofloat" ]] -then - LOCAL_IP=$(cat /opt/config/local_ip_addr.txt) - CIDR=$(cat /opt/config/oam_network_cidr.txt) - BITMASK=$(echo $CIDR | cut -d"/" -f2) - - # Compute the netmask based on the network cidr - if [[ $BITMASK == "8" ]] - then - NETMASK=255.0.0.0 - elif [[ $BITMASK == "16" ]] - then - NETMASK=255.255.0.0 - elif [[ $BITMASK == "24" ]] - then - NETMASK=255.255.255.0 - fi - - echo "auto eth1" >> /etc/network/interfaces - echo "iface eth1 inet static" >> /etc/network/interfaces - echo " address $LOCAL_IP" >> /etc/network/interfaces - echo " netmask $NETMASK" >> /etc/network/interfaces - echo " mtu $MTU" >> /etc/network/interfaces - ifup eth1 -fi - apt-get update apt-get install -y apt-transport-https ca-certificates curl git ntp ntpdate make software-properties-common # Download scripts from Nexus unzip -p -j /opt/boot-$ARTIFACTS_VERSION.zip nbi_vm_init.sh > /opt/nbi_vm_init.sh -unzip -p -j /opt/boot-$ARTIFACTS_VERSION.zip nbi_serv.sh > /opt/nbi_serv.sh +unzip -p -j /opt/boot-$ARTIFACTS_VERSION.zip serv.sh > /opt/nbi_serv.sh unzip -p -j /opt/boot-$ARTIFACTS_VERSION.zip imagetest.sh > /opt/imagetest.sh chmod +x /opt/imagetest.sh chmod +x /opt/nbi_vm_init.sh chmod +x /opt/nbi_serv.sh +sed -i "s|cmd=\"\"|cmd=\"./nbi_vm_init.sh\"|g" /opt/nbi_serv.sh mv /opt/nbi_serv.sh /etc/init.d update-rc.d nbi_serv.sh defaults @@ -105,18 +78,6 @@ service docker restart echo "nameserver "$DNS_IP_ADDR >> /etc/resolvconf/resolv.conf.d/head resolvconf -u -# Rename network interface in openstack Ubuntu 16.04 images. Then, reboot the VM to pick up changes -if [[ $CLOUD_ENV != "rackspace" ]] -then - sed -i "s/GRUB_CMDLINE_LINUX=.*/GRUB_CMDLINE_LINUX=\"net.ifnames=0 biosdevname=0\"/g" /etc/default/grub - grub-mkconfig -o /boot/grub/grub.cfg - sed -i "s/ens[0-9]*/eth0/g" /etc/network/interfaces.d/*.cfg - sed -i "s/ens[0-9]*/eth0/g" /etc/udev/rules.d/70-persistent-net.rules - echo 'network: {config: disabled}' >> /etc/cloud/cloud.cfg.d/99-disable-network-config.cfg - echo "APT::Periodic::Unattended-Upgrade \"0\";" >> /etc/apt/apt.conf.d/10periodic - reboot -fi - # Run docker containers cd /opt ./nbi_vm_init.sh diff --git a/boot/nbi_serv.sh b/boot/nbi_serv.sh deleted file mode 100644 index 9c4eea02..00000000 --- a/boot/nbi_serv.sh +++ /dev/null @@ -1,106 +0,0 @@ -#!/bin/sh -### BEGIN INIT INFO -# Provides: -# Required-Start: $remote_fs $syslog -# Required-Stop: $remote_fs $syslog -# Default-Start: 2 3 4 5 -# Default-Stop: 0 1 6 -# Short-Description: Start daemon at boot time -# Description: Enable service provided by daemon. -### END INIT INFO -HTTP_PROXY=$(cat /opt/config/http_proxy.txt) -HTTPS_PROXY=$(cat /opt/config/https_proxy.txt) - -if [ $HTTP_PROXY != "no_proxy" ] -then - export http_proxy=$HTTP_PROXY - export https_proxy=$HTTPS_PROXY -fi - -dir="/opt" -cmd="./nbi_vm_init.sh" -user="root" - -name=`basename $0` -pid_file="/var/run/$name.pid" -stdout_log="/var/log/$name.log" -stderr_log="/var/log/$name.err" - -get_pid() { - cat "$pid_file" -} - -is_running() { - [ -f "$pid_file" ] && ps `get_pid` > /dev/null 2>&1 -} - -case "$1" in - start) - if is_running; then - echo "Already started" - else - echo "Starting $name" - cd "$dir" - if [ -z "$user" ]; then - sudo $cmd >> "$stdout_log" 2>> "$stderr_log" & - else - sudo -u "$user" $cmd >> "$stdout_log" 2>> "$stderr_log" & - fi - echo $! > "$pid_file" - if ! is_running; then - echo "Unable to start, see $stdout_log and $stderr_log" - exit 1 - fi - fi - ;; - stop) - if is_running; then - echo -n "Stopping $name.." - kill `get_pid` - for i in {1..10} - do - if ! is_running; then - break - fi - - echo -n "." - sleep 1 - done - echo - - if is_running; then - echo "Not stopped; may still be shutting down or shutdown may have failed" - exit 1 - else - echo "Stopped" - if [ -f "$pid_file" ]; then - rm "$pid_file" - fi - fi - else - echo "Not running" - fi - ;; - restart) - $0 stop - if is_running; then - echo "Unable to stop, will not attempt to start" - exit 1 - fi - $0 start - ;; - status) - if is_running; then - echo "Running" - else - echo "Stopped" - exit 1 - fi - ;; - *) - echo "Usage: $0 {start|stop|restart|status}" - exit 1 - ;; -esac - -exit 0 diff --git a/boot/oof_install.sh b/boot/oof_install.sh index 338677f2..d8eda1de 100644 --- a/boot/oof_install.sh +++ b/boot/oof_install.sh @@ -26,45 +26,18 @@ then cp /home/ubuntu/.ssh/authorized_keys /root/.ssh fi -# Set private IP in /etc/network/interfaces manually in the presence of public interface -# Some VM images don't add the private interface automatically, we have to do it during the component installation -if [[ $CLOUD_ENV == "openstack_nofloat" ]] -then - LOCAL_IP=$(cat /opt/config/local_ip_addr.txt) - CIDR=$(cat /opt/config/oam_network_cidr.txt) - BITMASK=$(echo $CIDR | cut -d"/" -f2) - - # Compute the netmask based on the network cidr - if [[ $BITMASK == "8" ]] - then - NETMASK=255.0.0.0 - elif [[ $BITMASK == "16" ]] - then - NETMASK=255.255.0.0 - elif [[ $BITMASK == "24" ]] - then - NETMASK=255.255.255.0 - fi - - echo "auto eth1" >> /etc/network/interfaces - echo "iface eth1 inet static" >> /etc/network/interfaces - echo " address $LOCAL_IP" >> /etc/network/interfaces - echo " netmask $NETMASK" >> /etc/network/interfaces - echo " mtu $MTU" >> /etc/network/interfaces - ifup eth1 -fi - # Download dependencies apt-get update apt-get install -y apt-transport-https ca-certificates wget git ntp ntpdate make # Download scripts from Nexus unzip -p -j /opt/boot-$ARTIFACTS_VERSION.zip oof_vm_init.sh > /opt/oof_vm_init.sh -unzip -p -j /opt/boot-$ARTIFACTS_VERSION.zip oof_serv.sh > /opt/oof_serv.sh +unzip -p -j /opt/boot-$ARTIFACTS_VERSION.zip serv.sh > /opt/oof_serv.sh unzip -p -j /opt/boot-$ARTIFACTS_VERSION.zip imagetest.sh > /opt/imagetest.sh chmod +x /opt/imagetest.sh chmod +x /opt/oof_vm_init.sh chmod +x /opt/oof_serv.sh +sed -i "s|cmd=\"\"|cmd=\"./oof_vm_init.sh\"|g" /opt/oof_serv.sh mv /opt/oof_serv.sh /etc/init.d update-rc.d oof_serv.sh defaults @@ -103,21 +76,7 @@ service docker restart echo "nameserver "$DNS_IP_ADDR >> /etc/resolvconf/resolv.conf.d/head resolvconf -u -# Clone Gerrit repository +# Clone Gerrit repository and run docker containers cd /opt git clone -b $GERRIT_BRANCH --single-branch $CODE_REPO optf-has - -# Rename network interface in openstack Ubuntu 16.04 images. Then, reboot the VM to pick up changes -if [[ $CLOUD_ENV != "rackspace" ]] -then - sed -i "s/GRUB_CMDLINE_LINUX=.*/GRUB_CMDLINE_LINUX=\"net.ifnames=0 biosdevname=0\"/g" /etc/default/grub - grub-mkconfig -o /boot/grub/grub.cfg - sed -i "s/ens[0-9]*/eth0/g" /etc/network/interfaces.d/*.cfg - sed -i "s/ens[0-9]*/eth0/g" /etc/udev/rules.d/70-persistent-net.rules - echo 'network: {config: disabled}' >> /etc/cloud/cloud.cfg.d/99-disable-network-config.cfg - echo "APT::Periodic::Unattended-Upgrade \"0\";" >> /etc/apt/apt.conf.d/10periodic - reboot -fi - -# Run docker containers ./oof_vm_init.sh \ No newline at end of file diff --git a/boot/oof_serv.sh b/boot/oof_serv.sh deleted file mode 100644 index 4e73ac88..00000000 --- a/boot/oof_serv.sh +++ /dev/null @@ -1,106 +0,0 @@ -#!/bin/sh -### BEGIN INIT INFO -# Provides: -# Required-Start: $remote_fs $syslog -# Required-Stop: $remote_fs $syslog -# Default-Start: 2 3 4 5 -# Default-Stop: 0 1 6 -# Short-Description: Start daemon at boot time -# Description: Enable service provided by daemon. -### END INIT INFO -HTTP_PROXY=$(cat /opt/config/http_proxy.txt) -HTTPS_PROXY=$(cat /opt/config/https_proxy.txt) - -if [ $HTTP_PROXY != "no_proxy" ] -then - export http_proxy=$HTTP_PROXY - export https_proxy=$HTTPS_PROXY -fi - -dir="/opt" -cmd="./oof_vm_init.sh" -user="root" - -name=`basename $0` -pid_file="/var/run/$name.pid" -stdout_log="/var/log/$name.log" -stderr_log="/var/log/$name.err" - -get_pid() { - cat "$pid_file" -} - -is_running() { - [ -f "$pid_file" ] && ps `get_pid` > /dev/null 2>&1 -} - -case "$1" in - start) - if is_running; then - echo "Already started" - else - echo "Starting $name" - cd "$dir" - if [ -z "$user" ]; then - sudo $cmd >> "$stdout_log" 2>> "$stderr_log" & - else - sudo -u "$user" $cmd >> "$stdout_log" 2>> "$stderr_log" & - fi - echo $! > "$pid_file" - if ! is_running; then - echo "Unable to start, see $stdout_log and $stderr_log" - exit 1 - fi - fi - ;; - stop) - if is_running; then - echo -n "Stopping $name.." - kill `get_pid` - for i in {1..10} - do - if ! is_running; then - break - fi - - echo -n "." - sleep 1 - done - echo - - if is_running; then - echo "Not stopped; may still be shutting down or shutdown may have failed" - exit 1 - else - echo "Stopped" - if [ -f "$pid_file" ]; then - rm "$pid_file" - fi - fi - else - echo "Not running" - fi - ;; - restart) - $0 stop - if is_running; then - echo "Unable to stop, will not attempt to start" - exit 1 - fi - $0 start - ;; - status) - if is_running; then - echo "Running" - else - echo "Stopped" - exit 1 - fi - ;; - *) - echo "Usage: $0 {start|stop|restart|status}" - exit 1 - ;; -esac - -exit 0 diff --git a/boot/openo_install.sh b/boot/openo_install.sh index 80c77160..57e00949 100644 --- a/boot/openo_install.sh +++ b/boot/openo_install.sh @@ -26,34 +26,6 @@ then cp /home/ubuntu/.ssh/authorized_keys /root/.ssh fi -# Set private IP in /etc/network/interfaces manually in the presence of public interface -# Some VM images don't add the private interface automatically, we have to do it during the component installation -if [[ $CLOUD_ENV == "openstack_nofloat" ]] -then - LOCAL_IP=$(cat /opt/config/local_ip_addr.txt) - CIDR=$(cat /opt/config/oam_network_cidr.txt) - BITMASK=$(echo $CIDR | cut -d"/" -f2) - - # Compute the netmask based on the network cidr - if [[ $BITMASK == "8" ]] - then - NETMASK=255.0.0.0 - elif [[ $BITMASK == "16" ]] - then - NETMASK=255.255.0.0 - elif [[ $BITMASK == "24" ]] - then - NETMASK=255.255.255.0 - fi - - echo "auto eth1" >> /etc/network/interfaces - echo "iface eth1 inet static" >> /etc/network/interfaces - echo " address $LOCAL_IP" >> /etc/network/interfaces - echo " netmask $NETMASK" >> /etc/network/interfaces - echo " mtu $MTU" >> /etc/network/interfaces - ifup eth1 -fi - # Download dependencies apt-get update apt-get install -y apt-transport-https ca-certificates wget git unzip mysql-client-core-5.6 ntp ntpdate make @@ -65,7 +37,7 @@ unzip -p -j /opt/boot-$ARTIFACTS_VERSION.zip mvim_vm_init.sh > /opt/mvim_vm_init unzip -p -j /opt/boot-$ARTIFACTS_VERSION.zip vfc_vm_init.sh > /opt/vfc_vm_init.sh unzip -p -j /opt/boot-$ARTIFACTS_VERSION.zip uui_vm_init.sh > /opt/uui_vm_init.sh unzip -p -j /opt/boot-$ARTIFACTS_VERSION.zip openo_all_serv.sh > /opt/openo_all_serv.sh -unzip -p -j /opt/boot-$ARTIFACTS_VERSION.zip openo_serv.sh > /opt/openo_serv.sh +unzip -p -j /opt/boot-$ARTIFACTS_VERSION.zip serv.sh > /opt/openo_serv.sh unzip -p -j /opt/boot-$ARTIFACTS_VERSION.zip cli_install.sh > /opt/cli_install.sh unzip -p -j /opt/boot-$ARTIFACTS_VERSION.zip esr_vm_init.sh > /opt/esr_vm_init.sh unzip -p -j /opt/boot-$ARTIFACTS_VERSION.zip imagetest.sh > /opt/imagetest.sh @@ -79,6 +51,7 @@ chmod +x /opt/openo_all_serv.sh chmod +x /opt/openo_serv.sh chmod +x /opt/cli_install.sh chmod +x /opt/esr_vm_init.sh +sed -i "s|cmd=\"\"|cmd=\"./openo_all_serv.sh\"|g" /opt/openo_serv.sh mv /opt/openo_serv.sh /etc/init.d update-rc.d openo_serv.sh defaults @@ -120,19 +93,5 @@ resolvconf -u # Clone Gerrit repository and run docker containers cd /opt git clone -b $VNFSDK_BRANCH --single-branch $VNFSDK_REPO - source ./cli_install.sh - -# Rename network interface in openstack Ubuntu 16.04 images. Then, reboot the VM to pick up changes -if [[ $CLOUD_ENV != "rackspace" ]] -then - sed -i "s/GRUB_CMDLINE_LINUX=.*/GRUB_CMDLINE_LINUX=\"net.ifnames=0 biosdevname=0\"/g" /etc/default/grub - grub-mkconfig -o /boot/grub/grub.cfg - sed -i "s/ens[0-9]*/eth0/g" /etc/network/interfaces.d/*.cfg - sed -i "s/ens[0-9]*/eth0/g" /etc/udev/rules.d/70-persistent-net.rules - echo 'network: {config: disabled}' >> /etc/cloud/cloud.cfg.d/99-disable-network-config.cfg - echo "APT::Periodic::Unattended-Upgrade \"0\";" >> /etc/apt/apt.conf.d/10periodic - reboot -fi - ./openo_all_serv.sh \ No newline at end of file diff --git a/boot/openo_serv.sh b/boot/openo_serv.sh deleted file mode 100644 index 71f0245d..00000000 --- a/boot/openo_serv.sh +++ /dev/null @@ -1,106 +0,0 @@ -#!/bin/sh -### BEGIN INIT INFO -# Provides: -# Required-Start: $remote_fs $syslog -# Required-Stop: $remote_fs $syslog -# Default-Start: 2 3 4 5 -# Default-Stop: 0 1 6 -# Short-Description: Start daemon at boot time -# Description: Enable service provided by daemon. -### END INIT INFO -HTTP_PROXY=$(cat /opt/config/http_proxy.txt) -HTTPS_PROXY=$(cat /opt/config/https_proxy.txt) - -if [ $HTTP_PROXY != "no_proxy" ] -then - export http_proxy=$HTTP_PROXY - export https_proxy=$HTTPS_PROXY -fi - -dir="/opt" -cmd="./openo_all_serv.sh" -user="root" - -name=`basename $0` -pid_file="/var/run/$name.pid" -stdout_log="/var/log/$name.log" -stderr_log="/var/log/$name.err" - -get_pid() { - cat "$pid_file" -} - -is_running() { - [ -f "$pid_file" ] && ps `get_pid` > /dev/null 2>&1 -} - -case "$1" in - start) - if is_running; then - echo "Already started" - else - echo "Starting $name" - cd "$dir" - if [ -z "$user" ]; then - sudo $cmd >> "$stdout_log" 2>> "$stderr_log" & - else - sudo -u "$user" $cmd >> "$stdout_log" 2>> "$stderr_log" & - fi - echo $! > "$pid_file" - if ! is_running; then - echo "Unable to start, see $stdout_log and $stderr_log" - exit 1 - fi - fi - ;; - stop) - if is_running; then - echo -n "Stopping $name.." - kill `get_pid` - for i in {1..10} - do - if ! is_running; then - break - fi - - echo -n "." - sleep 1 - done - echo - - if is_running; then - echo "Not stopped; may still be shutting down or shutdown may have failed" - exit 1 - else - echo "Stopped" - if [ -f "$pid_file" ]; then - rm "$pid_file" - fi - fi - else - echo "Not running" - fi - ;; - restart) - $0 stop - if is_running; then - echo "Unable to stop, will not attempt to start" - exit 1 - fi - $0 start - ;; - status) - if is_running; then - echo "Running" - else - echo "Stopped" - exit 1 - fi - ;; - *) - echo "Usage: $0 {start|stop|restart|status}" - exit 1 - ;; -esac - -exit 0 diff --git a/boot/policy_install.sh b/boot/policy_install.sh index cd50487e..c77323d1 100644 --- a/boot/policy_install.sh +++ b/boot/policy_install.sh @@ -26,45 +26,18 @@ then cp /home/ubuntu/.ssh/authorized_keys /root/.ssh fi -# Set private IP in /etc/network/interfaces manually in the presence of public interface -# Some VM images don't add the private interface automatically, we have to do it during the component installation -if [[ $CLOUD_ENV == "openstack_nofloat" ]] -then - LOCAL_IP=$(cat /opt/config/local_ip_addr.txt) - CIDR=$(cat /opt/config/oam_network_cidr.txt) - BITMASK=$(echo $CIDR | cut -d"/" -f2) - - # Compute the netmask based on the network cidr - if [[ $BITMASK == "8" ]] - then - NETMASK=255.0.0.0 - elif [[ $BITMASK == "16" ]] - then - NETMASK=255.255.0.0 - elif [[ $BITMASK == "24" ]] - then - NETMASK=255.255.255.0 - fi - - echo "auto eth1" >> /etc/network/interfaces - echo "iface eth1 inet static" >> /etc/network/interfaces - echo " address $LOCAL_IP" >> /etc/network/interfaces - echo " netmask $NETMASK" >> /etc/network/interfaces - echo " mtu $MTU" >> /etc/network/interfaces - ifup eth1 -fi - # Download dependencies apt-get update apt-get install -y apt-transport-https ca-certificates wget git ntp ntpdate make # Download scripts from Nexus unzip -p -j /opt/boot-$ARTIFACTS_VERSION.zip policy_vm_init.sh > /opt/policy_vm_init.sh -unzip -p -j /opt/boot-$ARTIFACTS_VERSION.zip policy_serv.sh > /opt/policy_serv.sh +unzip -p -j /opt/boot-$ARTIFACTS_VERSION.zip serv.sh > /opt/policy_serv.sh unzip -p -j /opt/boot-$ARTIFACTS_VERSION.zip imagetest.sh > /opt/imagetest.sh chmod +x /opt/imagetest.sh chmod +x /opt/policy_vm_init.sh chmod +x /opt/policy_serv.sh +sed -i "s|cmd=\"\"|cmd=\"./policy_vm_init.sh\"|g" /opt/policy_serv.sh mv /opt/policy_serv.sh /etc/init.d update-rc.d policy_serv.sh defaults diff --git a/boot/policy_serv.sh b/boot/policy_serv.sh deleted file mode 100644 index f5e2b230..00000000 --- a/boot/policy_serv.sh +++ /dev/null @@ -1,106 +0,0 @@ -#!/bin/sh -### BEGIN INIT INFO -# Provides: -# Required-Start: $remote_fs $syslog -# Required-Stop: $remote_fs $syslog -# Default-Start: 2 3 4 5 -# Default-Stop: 0 1 6 -# Short-Description: Start daemon at boot time -# Description: Enable service provided by daemon. -### END INIT INFO -HTTP_PROXY=$(cat /opt/config/http_proxy.txt) -HTTPS_PROXY=$(cat /opt/config/https_proxy.txt) - -if [ $HTTP_PROXY != "no_proxy" ] -then - export http_proxy=$HTTP_PROXY - export https_proxy=$HTTPS_PROXY -fi - -dir="/opt" -cmd="./policy_vm_init.sh" -user="root" - -name=`basename $0` -pid_file="/var/run/$name.pid" -stdout_log="/var/log/$name.log" -stderr_log="/var/log/$name.err" - -get_pid() { - cat "$pid_file" -} - -is_running() { - [ -f "$pid_file" ] && ps `get_pid` > /dev/null 2>&1 -} - -case "$1" in - start) - if is_running; then - echo "Already started" - else - echo "Starting $name" - cd "$dir" - if [ -z "$user" ]; then - sudo $cmd >> "$stdout_log" 2>> "$stderr_log" & - else - sudo -u "$user" $cmd >> "$stdout_log" 2>> "$stderr_log" & - fi - echo $! > "$pid_file" - if ! is_running; then - echo "Unable to start, see $stdout_log and $stderr_log" - exit 1 - fi - fi - ;; - stop) - if is_running; then - echo -n "Stopping $name.." - kill `get_pid` - for i in {1..10} - do - if ! is_running; then - break - fi - - echo -n "." - sleep 1 - done - echo - - if is_running; then - echo "Not stopped; may still be shutting down or shutdown may have failed" - exit 1 - else - echo "Stopped" - if [ -f "$pid_file" ]; then - rm "$pid_file" - fi - fi - else - echo "Not running" - fi - ;; - restart) - $0 stop - if is_running; then - echo "Unable to stop, will not attempt to start" - exit 1 - fi - $0 start - ;; - status) - if is_running; then - echo "Running" - else - echo "Stopped" - exit 1 - fi - ;; - *) - echo "Usage: $0 {start|stop|restart|status}" - exit 1 - ;; -esac - -exit 0 diff --git a/boot/portal_install.sh b/boot/portal_install.sh index af96e5e4..d052d655 100644 --- a/boot/portal_install.sh +++ b/boot/portal_install.sh @@ -26,45 +26,18 @@ then cp /home/ubuntu/.ssh/authorized_keys /root/.ssh fi -# Set private IP in /etc/network/interfaces manually in the presence of public interface -# Some VM images don't add the private interface automatically, we have to do it during the component installation -if [[ $CLOUD_ENV == "openstack_nofloat" ]] -then - LOCAL_IP=$(cat /opt/config/local_ip_addr.txt) - CIDR=$(cat /opt/config/oam_network_cidr.txt) - BITMASK=$(echo $CIDR | cut -d"/" -f2) - - # Compute the netmask based on the network cidr - if [[ $BITMASK == "8" ]] - then - NETMASK=255.0.0.0 - elif [[ $BITMASK == "16" ]] - then - NETMASK=255.255.0.0 - elif [[ $BITMASK == "24" ]] - then - NETMASK=255.255.255.0 - fi - - echo "auto eth1" >> /etc/network/interfaces - echo "iface eth1 inet static" >> /etc/network/interfaces - echo " address $LOCAL_IP" >> /etc/network/interfaces - echo " netmask $NETMASK" >> /etc/network/interfaces - echo " mtu $MTU" >> /etc/network/interfaces - ifup eth1 -fi - # Download dependencies apt-get update apt-get install -y apt-transport-https ca-certificates wget git unzip mysql-client-core-5.6 ntp ntpdate make # Download scripts from Nexus unzip -p -j /opt/boot-$ARTIFACTS_VERSION.zip portal_vm_init.sh > /opt/portal_vm_init.sh -unzip -p -j /opt/boot-$ARTIFACTS_VERSION.zip portal_serv.sh > /opt/portal_serv.sh +unzip -p -j /opt/boot-$ARTIFACTS_VERSION.zip serv.sh > /opt/portal_serv.sh unzip -p -j /opt/boot-$ARTIFACTS_VERSION.zip imagetest.sh > /opt/imagetest.sh chmod +x /opt/imagetest.sh chmod +x /opt/portal_vm_init.sh chmod +x /opt/portal_serv.sh +sed -i "s|cmd=\"\"|cmd=\"./portal_vm_init.sh\"|g" /opt/portal_serv.sh mv /opt/portal_serv.sh /etc/init.d update-rc.d portal_serv.sh defaults @@ -106,5 +79,4 @@ resolvconf -u # Clone Gerrit repository and run docker containers cd /opt git clone -b $GERRIT_BRANCH --single-branch $CODE_REPO - ./portal_vm_init.sh diff --git a/boot/portal_serv.sh b/boot/portal_serv.sh deleted file mode 100644 index d27e4693..00000000 --- a/boot/portal_serv.sh +++ /dev/null @@ -1,106 +0,0 @@ -#!/bin/sh -### BEGIN INIT INFO -# Provides: -# Required-Start: $remote_fs $syslog -# Required-Stop: $remote_fs $syslog -# Default-Start: 2 3 4 5 -# Default-Stop: 0 1 6 -# Short-Description: Start daemon at boot time -# Description: Enable service provided by daemon. -### END INIT INFO -HTTP_PROXY=$(cat /opt/config/http_proxy.txt) -HTTPS_PROXY=$(cat /opt/config/https_proxy.txt) - -if [ $HTTP_PROXY != "no_proxy" ] -then - export http_proxy=$HTTP_PROXY - export https_proxy=$HTTPS_PROXY -fi - -dir="/opt" -cmd="./portal_vm_init.sh" -user="root" - -name=`basename $0` -pid_file="/var/run/$name.pid" -stdout_log="/var/log/$name.log" -stderr_log="/var/log/$name.err" - -get_pid() { - cat "$pid_file" -} - -is_running() { - [ -f "$pid_file" ] && ps `get_pid` > /dev/null 2>&1 -} - -case "$1" in - start) - if is_running; then - echo "Already started" - else - echo "Starting $name" - cd "$dir" - if [ -z "$user" ]; then - sudo $cmd >> "$stdout_log" 2>> "$stderr_log" & - else - sudo -u "$user" $cmd >> "$stdout_log" 2>> "$stderr_log" & - fi - echo $! > "$pid_file" - if ! is_running; then - echo "Unable to start, see $stdout_log and $stderr_log" - exit 1 - fi - fi - ;; - stop) - if is_running; then - echo -n "Stopping $name.." - kill `get_pid` - for i in {1..10} - do - if ! is_running; then - break - fi - - echo -n "." - sleep 1 - done - echo - - if is_running; then - echo "Not stopped; may still be shutting down or shutdown may have failed" - exit 1 - else - echo "Stopped" - if [ -f "$pid_file" ]; then - rm "$pid_file" - fi - fi - else - echo "Not running" - fi - ;; - restart) - $0 stop - if is_running; then - echo "Unable to stop, will not attempt to start" - exit 1 - fi - $0 start - ;; - status) - if is_running; then - echo "Running" - else - echo "Stopped" - exit 1 - fi - ;; - *) - echo "Usage: $0 {start|stop|restart|status}" - exit 1 - ;; -esac - -exit 0 diff --git a/boot/robot_install.sh b/boot/robot_install.sh index a41cf886..7896ecde 100644 --- a/boot/robot_install.sh +++ b/boot/robot_install.sh @@ -27,42 +27,15 @@ then cp /home/ubuntu/.ssh/authorized_keys /root/.ssh fi -# Set private IP in /etc/network/interfaces manually in the presence of public interface -# Some VM images don't add the private interface automatically, we have to do it during the component installation -if [[ $CLOUD_ENV == "openstack_nofloat" ]] -then - LOCAL_IP=$(cat /opt/config/local_ip_addr.txt) - CIDR=$(cat /opt/config/oam_network_cidr.txt) - BITMASK=$(echo $CIDR | cut -d"/" -f2) - - # Compute the netmask based on the network cidr - if [[ $BITMASK == "8" ]] - then - NETMASK=255.0.0.0 - elif [[ $BITMASK == "16" ]] - then - NETMASK=255.255.0.0 - elif [[ $BITMASK == "24" ]] - then - NETMASK=255.255.255.0 - fi - - echo "auto eth1" >> /etc/network/interfaces - echo "iface eth1 inet static" >> /etc/network/interfaces - echo " address $LOCAL_IP" >> /etc/network/interfaces - echo " netmask $NETMASK" >> /etc/network/interfaces - echo " mtu $MTU" >> /etc/network/interfaces - ifup eth1 -fi - apt-get update apt-get install -y apt-transport-https ca-certificates wget git ntp ntpdate make # Download scripts from Nexus unzip -p -j /opt/boot-$ARTIFACTS_VERSION.zip robot_vm_init.sh > /opt/robot_vm_init.sh chmod +x /opt/robot_vm_init.sh -unzip -p -j /opt/boot-$ARTIFACTS_VERSION.zip robot_serv.sh > /opt/robot_serv.sh +unzip -p -j /opt/boot-$ARTIFACTS_VERSION.zip serv.sh > /opt/robot_serv.sh chmod +x /opt/robot_serv.sh +sed -i "s|cmd=\"\"|cmd=\"./robot_vm_init.sh\"|g" /opt/robot_serv.sh unzip -p -j /opt/boot-$ARTIFACTS_VERSION.zip imagetest.sh > /opt/imagetest.sh chmod +x /opt/imagetest.sh @@ -112,18 +85,5 @@ service docker restart echo "nameserver "$DNS_IP_ADDR >> /etc/resolvconf/resolv.conf.d/head resolvconf -u - -# Rename network interface in openstack Ubuntu 16.04 images. Then, reboot the VM to pick up changes -if [[ $CLOUD_ENV != "rackspace" ]] -then - sed -i "s/GRUB_CMDLINE_LINUX=.*/GRUB_CMDLINE_LINUX=\"net.ifnames=0 biosdevname=0\"/g" /etc/default/grub - grub-mkconfig -o /boot/grub/grub.cfg - sed -i "s/ens[0-9]*/eth0/g" /etc/network/interfaces.d/*.cfg - sed -i "s/ens[0-9]*/eth0/g" /etc/udev/rules.d/70-persistent-net.rules - echo 'network: {config: disabled}' >> /etc/cloud/cloud.cfg.d/99-disable-network-config.cfg - echo "APT::Periodic::Unattended-Upgrade \"0\";" >> /etc/apt/apt.conf.d/10periodic - reboot -fi - -# Run docker containers. For openstack Ubuntu 16.04 images this will run as a service after the VM has restarted +# Run docker containers. ./robot_vm_init.sh diff --git a/boot/robot_serv.sh b/boot/robot_serv.sh deleted file mode 100644 index 75934f4e..00000000 --- a/boot/robot_serv.sh +++ /dev/null @@ -1,106 +0,0 @@ -#!/bin/sh -### BEGIN INIT INFO -# Provides: onap-testsuite -# Required-Start: $remote_fs $syslog -# Required-Stop: $remote_fs $syslog -# Default-Start: 2 3 4 5 -# Default-Stop: 0 1 6 -# Short-Description: Start daemon at boot time -# Description: Enable service provided by daemon. -### END INIT INFO -HTTP_PROXY=$(cat /opt/config/http_proxy.txt) -HTTPS_PROXY=$(cat /opt/config/https_proxy.txt) - -if [ $HTTP_PROXY != "no_proxy" ] -then - export http_proxy=$HTTP_PROXY - export https_proxy=$HTTPS_PROXY -fi - -dir="/opt" -cmd="./robot_vm_init.sh" -user="root" - -name=`basename $0` -pid_file="/var/run/$name.pid" -stdout_log="/var/log/$name.log" -stderr_log="/var/log/$name.err" - -get_pid() { - cat "$pid_file" -} - -is_running() { - [ -f "$pid_file" ] && ps `get_pid` > /dev/null 2>&1 -} - -case "$1" in - start) - if is_running; then - echo "Already started" - else - echo "Starting $name" - cd "$dir" - if [ -z "$user" ]; then - sudo $cmd >> "$stdout_log" 2>> "$stderr_log" & - else - sudo -u "$user" $cmd >> "$stdout_log" 2>> "$stderr_log" & - fi - echo $! > "$pid_file" - if ! is_running; then - echo "Unable to start, see $stdout_log and $stderr_log" - exit 1 - fi - fi - ;; - stop) - if is_running; then - echo -n "Stopping $name.." - kill `get_pid` - for i in {1..10} - do - if ! is_running; then - break - fi - - echo -n "." - sleep 1 - done - echo - - if is_running; then - echo "Not stopped; may still be shutting down or shutdown may have failed" - exit 1 - else - echo "Stopped" - if [ -f "$pid_file" ]; then - rm "$pid_file" - fi - fi - else - echo "Not running" - fi - ;; - restart) - $0 stop - if is_running; then - echo "Unable to stop, will not attempt to start" - exit 1 - fi - $0 start - ;; - status) - if is_running; then - echo "Running" - else - echo "Stopped" - exit 1 - fi - ;; - *) - echo "Usage: $0 {start|stop|restart|status}" - exit 1 - ;; -esac - -exit 0 diff --git a/boot/sdc_install.sh b/boot/sdc_install.sh index fd0ae900..55963734 100644 --- a/boot/sdc_install.sh +++ b/boot/sdc_install.sh @@ -26,45 +26,18 @@ then cp /home/ubuntu/.ssh/authorized_keys /root/.ssh fi -# Set private IP in /etc/network/interfaces manually in the presence of public interface -# Some VM images don't add the private interface automatically, we have to do it during the component installation -if [[ $CLOUD_ENV == "openstack_nofloat" ]] -then - LOCAL_IP=$(cat /opt/config/local_ip_addr.txt) - CIDR=$(cat /opt/config/oam_network_cidr.txt) - BITMASK=$(echo $CIDR | cut -d"/" -f2) - - # Compute the netmask based on the network cidr - if [[ $BITMASK == "8" ]] - then - NETMASK=255.0.0.0 - elif [[ $BITMASK == "16" ]] - then - NETMASK=255.255.0.0 - elif [[ $BITMASK == "24" ]] - then - NETMASK=255.255.255.0 - fi - - echo "auto eth1" >> /etc/network/interfaces - echo "iface eth1 inet static" >> /etc/network/interfaces - echo " address $LOCAL_IP" >> /etc/network/interfaces - echo " netmask $NETMASK" >> /etc/network/interfaces - echo " mtu $MTU" >> /etc/network/interfaces - ifup eth1 -fi - # Download dependencies apt-get update apt-get install -y apt-transport-https ca-certificates wget git ntp ntpdate make # Download scripts from Nexus unzip -p -j /opt/boot-$ARTIFACTS_VERSION.zip sdc_vm_init.sh > /opt/sdc_vm_init.sh -unzip -p -j /opt/boot-$ARTIFACTS_VERSION.zip sdc_serv.sh > /opt/sdc_serv.sh +unzip -p -j /opt/boot-$ARTIFACTS_VERSION.zip serv.sh > /opt/sdc_serv.sh unzip -p -j /opt/boot-$ARTIFACTS_VERSION.zip sdc_wfd_vm_init.sh > /opt/sdc_wfd_vm_init.sh chmod +x /opt/sdc_vm_init.sh chmod +x /opt/sdc_serv.sh chmod +x /opt/sdc_wfd_vm_init.sh +sed -i "s|cmd=\"\"|cmd=\"./sdc_vm_init.sh\"|g" /opt/sdc_serv.sh mv /opt/sdc_serv.sh /etc/init.d update-rc.d sdc_serv.sh defaults @@ -139,18 +112,6 @@ alias rund='/data/scripts/docker_run.sh' alias health='/data/scripts/docker_health.sh' EOF -# Rename network interface in openstack Ubuntu 16.04 images. Then, reboot the VM to pick up changes -if [[ $CLOUD_ENV != "rackspace" ]] -then - sed -i "s/GRUB_CMDLINE_LINUX=.*/GRUB_CMDLINE_LINUX=\"net.ifnames=0 biosdevname=0\"/g" /etc/default/grub - grub-mkconfig -o /boot/grub/grub.cfg - sed -i "s/ens[0-9]*/eth0/g" /etc/network/interfaces.d/*.cfg - sed -i "s/ens[0-9]*/eth0/g" /etc/udev/rules.d/70-persistent-net.rules - echo 'network: {config: disabled}' >> /etc/cloud/cloud.cfg.d/99-disable-network-config.cfg - echo "APT::Periodic::Unattended-Upgrade \"0\";" >> /etc/apt/apt.conf.d/10periodic - reboot -fi - # Run docker containers. For openstack Ubuntu 16.04 images this will run as a service after the VM has restarted ./sdc_vm_init.sh ./sdc_wfd_vm_init.sh diff --git a/boot/sdc_serv.sh b/boot/sdc_serv.sh deleted file mode 100644 index 8083cb7e..00000000 --- a/boot/sdc_serv.sh +++ /dev/null @@ -1,106 +0,0 @@ -#!/bin/sh -### BEGIN INIT INFO -# Provides: -# Required-Start: $remote_fs $syslog -# Required-Stop: $remote_fs $syslog -# Default-Start: 2 3 4 5 -# Default-Stop: 0 1 6 -# Short-Description: Start daemon at boot time -# Description: Enable service provided by daemon. -### END INIT INFO -HTTP_PROXY=$(cat /opt/config/http_proxy.txt) -HTTPS_PROXY=$(cat /opt/config/https_proxy.txt) - -if [ $HTTP_PROXY != "no_proxy" ] -then - export http_proxy=$HTTP_PROXY - export https_proxy=$HTTPS_PROXY -fi - -dir="/opt" -cmd="./sdc_vm_init.sh" -user="root" - -name=`basename $0` -pid_file="/var/run/$name.pid" -stdout_log="/var/log/$name.log" -stderr_log="/var/log/$name.err" - -get_pid() { - cat "$pid_file" -} - -is_running() { - [ -f "$pid_file" ] && ps `get_pid` > /dev/null 2>&1 -} - -case "$1" in - start) - if is_running; then - echo "Already started" - else - echo "Starting $name" - cd "$dir" - if [ -z "$user" ]; then - sudo $cmd >> "$stdout_log" 2>> "$stderr_log" & - else - sudo -u "$user" $cmd >> "$stdout_log" 2>> "$stderr_log" & - fi - echo $! > "$pid_file" - if ! is_running; then - echo "Unable to start, see $stdout_log and $stderr_log" - exit 1 - fi - fi - ;; - stop) - if is_running; then - echo -n "Stopping $name.." - kill `get_pid` - for i in {1..10} - do - if ! is_running; then - break - fi - - echo -n "." - sleep 1 - done - echo - - if is_running; then - echo "Not stopped; may still be shutting down or shutdown may have failed" - exit 1 - else - echo "Stopped" - if [ -f "$pid_file" ]; then - rm "$pid_file" - fi - fi - else - echo "Not running" - fi - ;; - restart) - $0 stop - if is_running; then - echo "Unable to stop, will not attempt to start" - exit 1 - fi - $0 start - ;; - status) - if is_running; then - echo "Running" - else - echo "Stopped" - exit 1 - fi - ;; - *) - echo "Usage: $0 {start|stop|restart|status}" - exit 1 - ;; -esac - -exit 0 diff --git a/boot/sdnc_install.sh b/boot/sdnc_install.sh index e7333cd7..2c82eea5 100644 --- a/boot/sdnc_install.sh +++ b/boot/sdnc_install.sh @@ -26,45 +26,18 @@ then cp /home/ubuntu/.ssh/authorized_keys /root/.ssh fi -# Set private IP in /etc/network/interfaces manually in the presence of public interface -# Some VM images don't add the private interface automatically, we have to do it during the component installation -if [[ $CLOUD_ENV == "openstack_nofloat" ]] -then - LOCAL_IP=$(cat /opt/config/local_ip_addr.txt) - CIDR=$(cat /opt/config/oam_network_cidr.txt) - BITMASK=$(echo $CIDR | cut -d"/" -f2) - - # Compute the netmask based on the network cidr - if [[ $BITMASK == "8" ]] - then - NETMASK=255.0.0.0 - elif [[ $BITMASK == "16" ]] - then - NETMASK=255.255.0.0 - elif [[ $BITMASK == "24" ]] - then - NETMASK=255.255.255.0 - fi - - echo "auto eth1" >> /etc/network/interfaces - echo "iface eth1 inet static" >> /etc/network/interfaces - echo " address $LOCAL_IP" >> /etc/network/interfaces - echo " netmask $NETMASK" >> /etc/network/interfaces - echo " mtu $MTU" >> /etc/network/interfaces - ifup eth1 -fi - # Download dependencies apt-get update apt-get install -y apt-transport-https ca-certificates wget git ntp ntpdate make jq # Download scripts from Nexus unzip -p -j /opt/boot-$ARTIFACTS_VERSION.zip sdnc_vm_init.sh > /opt/sdnc_vm_init.sh -unzip -p -j /opt/boot-$ARTIFACTS_VERSION.zip sdnc_serv.sh > /opt/sdnc_serv.sh +unzip -p -j /opt/boot-$ARTIFACTS_VERSION.zip serv.sh > /opt/sdnc_serv.sh unzip -p -j /opt/boot-$ARTIFACTS_VERSION.zip imagetest.sh > /opt/imagetest.sh chmod +x /opt/imagetest.sh chmod +x /opt/sdnc_vm_init.sh chmod +x /opt/sdnc_serv.sh +sed -i "s|cmd=\"\"|cmd=\"./sdnc_vm_init.sh\"|g" /opt/sdnc_serv.sh mv /opt/sdnc_serv.sh /etc/init.d update-rc.d sdnc_serv.sh defaults diff --git a/boot/sdnc_serv.sh b/boot/sdnc_serv.sh deleted file mode 100644 index e5bb37ea..00000000 --- a/boot/sdnc_serv.sh +++ /dev/null @@ -1,106 +0,0 @@ -#!/bin/sh -### BEGIN INIT INFO -# Provides: -# Required-Start: $remote_fs $syslog -# Required-Stop: $remote_fs $syslog -# Default-Start: 2 3 4 5 -# Default-Stop: 0 1 6 -# Short-Description: Start daemon at boot time -# Description: Enable service provided by daemon. -### END INIT INFO -HTTP_PROXY=$(cat /opt/config/http_proxy.txt) -HTTPS_PROXY=$(cat /opt/config/https_proxy.txt) - -if [ $HTTP_PROXY != "no_proxy" ] -then - export http_proxy=$HTTP_PROXY - export https_proxy=$HTTPS_PROXY -fi - -dir="/opt" -cmd="./sdnc_vm_init.sh" -user="root" - -name=`basename $0` -pid_file="/var/run/$name.pid" -stdout_log="/var/log/$name.log" -stderr_log="/var/log/$name.err" - -get_pid() { - cat "$pid_file" -} - -is_running() { - [ -f "$pid_file" ] && ps `get_pid` > /dev/null 2>&1 -} - -case "$1" in - start) - if is_running; then - echo "Already started" - else - echo "Starting $name" - cd "$dir" - if [ -z "$user" ]; then - sudo $cmd >> "$stdout_log" 2>> "$stderr_log" & - else - sudo -u "$user" $cmd >> "$stdout_log" 2>> "$stderr_log" & - fi - echo $! > "$pid_file" - if ! is_running; then - echo "Unable to start, see $stdout_log and $stderr_log" - exit 1 - fi - fi - ;; - stop) - if is_running; then - echo -n "Stopping $name.." - kill `get_pid` - for i in {1..10} - do - if ! is_running; then - break - fi - - echo -n "." - sleep 1 - done - echo - - if is_running; then - echo "Not stopped; may still be shutting down or shutdown may have failed" - exit 1 - else - echo "Stopped" - if [ -f "$pid_file" ]; then - rm "$pid_file" - fi - fi - else - echo "Not running" - fi - ;; - restart) - $0 stop - if is_running; then - echo "Unable to stop, will not attempt to start" - exit 1 - fi - $0 start - ;; - status) - if is_running; then - echo "Running" - else - echo "Stopped" - exit 1 - fi - ;; - *) - echo "Usage: $0 {start|stop|restart|status}" - exit 1 - ;; -esac - -exit 0 diff --git a/boot/serv.sh b/boot/serv.sh new file mode 100644 index 00000000..d34bd19e --- /dev/null +++ b/boot/serv.sh @@ -0,0 +1,106 @@ +#!/bin/sh +### BEGIN INIT INFO +# Provides: +# Required-Start: $remote_fs $syslog +# Required-Stop: $remote_fs $syslog +# Default-Start: 2 3 4 5 +# Default-Stop: 0 1 6 +# Short-Description: Start daemon at boot time +# Description: Enable service provided by daemon. +### END INIT INFO +HTTP_PROXY=$(cat /opt/config/http_proxy.txt) +HTTPS_PROXY=$(cat /opt/config/https_proxy.txt) + +if [ $HTTP_PROXY != "no_proxy" ] +then + export http_proxy=$HTTP_PROXY + export https_proxy=$HTTPS_PROXY +fi + +dir="/opt" +cmd="" +user="root" + +name=`basename $0` +pid_file="/var/run/$name.pid" +stdout_log="/var/log/$name.log" +stderr_log="/var/log/$name.err" + +get_pid() { + cat "$pid_file" +} + +is_running() { + [ -f "$pid_file" ] && ps `get_pid` > /dev/null 2>&1 +} + +case "$1" in + start) + if is_running; then + echo "Already started" + else + echo "Starting $name" + cd "$dir" + if [ -z "$user" ]; then + sudo $cmd >> "$stdout_log" 2>> "$stderr_log" & + else + sudo -u "$user" $cmd >> "$stdout_log" 2>> "$stderr_log" & + fi + echo $! > "$pid_file" + if ! is_running; then + echo "Unable to start, see $stdout_log and $stderr_log" + exit 1 + fi + fi + ;; + stop) + if is_running; then + echo -n "Stopping $name.." + kill `get_pid` + for i in {1..10} + do + if ! is_running; then + break + fi + + echo -n "." + sleep 1 + done + echo + + if is_running; then + echo "Not stopped; may still be shutting down or shutdown may have failed" + exit 1 + else + echo "Stopped" + if [ -f "$pid_file" ]; then + rm "$pid_file" + fi + fi + else + echo "Not running" + fi + ;; + restart) + $0 stop + if is_running; then + echo "Unable to stop, will not attempt to start" + exit 1 + fi + $0 start + ;; + status) + if is_running; then + echo "Running" + else + echo "Stopped" + exit 1 + fi + ;; + *) + echo "Usage: $0 {start|stop|restart|status}" + exit 1 + ;; +esac + +exit 0 diff --git a/boot/sms_install.sh b/boot/sms_install.sh index 9bcf19f2..bdd3a630 100644 --- a/boot/sms_install.sh +++ b/boot/sms_install.sh @@ -26,45 +26,18 @@ then cp /home/ubuntu/.ssh/authorized_keys /root/.ssh fi -# Set private IP in /etc/network/interfaces manually in the presence of public interface -# Some VM images don't add the private interface automatically, we have to do it during the component installation -if [[ $CLOUD_ENV == "openstack_nofloat" ]] -then - LOCAL_IP=$(cat /opt/config/local_ip_addr.txt) - CIDR=$(cat /opt/config/oam_network_cidr.txt) - BITMASK=$(echo $CIDR | cut -d"/" -f2) - - # Compute the netmask based on the network cidr - if [[ $BITMASK == "8" ]] - then - NETMASK=255.0.0.0 - elif [[ $BITMASK == "16" ]] - then - NETMASK=255.255.0.0 - elif [[ $BITMASK == "24" ]] - then - NETMASK=255.255.255.0 - fi - - echo "auto eth1" >> /etc/network/interfaces - echo "iface eth1 inet static" >> /etc/network/interfaces - echo " address $LOCAL_IP" >> /etc/network/interfaces - echo " netmask $NETMASK" >> /etc/network/interfaces - echo " mtu $MTU" >> /etc/network/interfaces - ifup eth1 -fi - # Download dependencies apt-get update apt-get install -y apt-transport-https ca-certificates wget git ntp ntpdate make # Download scripts from Nexus unzip -p -j /opt/boot-$ARTIFACTS_VERSION.zip sms_vm_init.sh > /opt/sms_vm_init.sh -unzip -p -j /opt/boot-$ARTIFACTS_VERSION.zip sms_serv.sh > /opt/sms_serv.sh +unzip -p -j /opt/boot-$ARTIFACTS_VERSION.zip serv.sh > /opt/sms_serv.sh unzip -p -j /opt/boot-$ARTIFACTS_VERSION.zip imagetest.sh > /opt/imagetest.sh chmod +x /opt/imagetest.sh chmod +x /opt/sms_vm_init.sh chmod +x /opt/sms_serv.sh +sed -i "s|cmd=\"\"|cmd=\"./sms_vm_init.sh\"|g" /opt/sms_serv.sh mv /opt/sms_serv.sh /etc/init.d update-rc.d sms_serv.sh defaults @@ -106,18 +79,4 @@ resolvconf -u # Clone Gerrit repository and run docker containers cd /opt git clone -b $GERRIT_BRANCH --single-branch $CODE_REPO - -# Rename network interface in openstack Ubuntu 16.04 images. Then, reboot the VM to pick up changes -if [[ $CLOUD_ENV != "rackspace" ]] -then - sed -i "s/GRUB_CMDLINE_LINUX=.*/GRUB_CMDLINE_LINUX=\"net.ifnames=0 biosdevname=0\"/g" /etc/default/grub - grub-mkconfig -o /boot/grub/grub.cfg - sed -i "s/ens[0-9]*/eth0/g" /etc/network/interfaces.d/*.cfg - sed -i "s/ens[0-9]*/eth0/g" /etc/udev/rules.d/70-persistent-net.rules - echo 'network: {config: disabled}' >> /etc/cloud/cloud.cfg.d/99-disable-network-config.cfg - echo "APT::Periodic::Unattended-Upgrade \"0\";" >> /etc/apt/apt.conf.d/10periodic - reboot -fi - -# Run docker containers. For openstack Ubuntu 16.04 images this will run as a service after the VM has restarted ./sms_vm_init.sh \ No newline at end of file diff --git a/boot/sms_serv.sh b/boot/sms_serv.sh deleted file mode 100644 index 06310db7..00000000 --- a/boot/sms_serv.sh +++ /dev/null @@ -1,106 +0,0 @@ -#!/bin/sh -### BEGIN INIT INFO -# Provides: -# Required-Start: $remote_fs $syslog -# Required-Stop: $remote_fs $syslog -# Default-Start: 2 3 4 5 -# Default-Stop: 0 1 6 -# Short-Description: Start daemon at boot time -# Description: Enable service provided by daemon. -### END INIT INFO -HTTP_PROXY=$(cat /opt/config/http_proxy.txt) -HTTPS_PROXY=$(cat /opt/config/https_proxy.txt) - -if [ $HTTP_PROXY != "no_proxy" ] -then - export http_proxy=$HTTP_PROXY - export https_proxy=$HTTPS_PROXY -fi - -dir="/opt" -cmd="./sms_vm_init.sh" -user="root" - -name=`basename $0` -pid_file="/var/run/$name.pid" -stdout_log="/var/log/$name.log" -stderr_log="/var/log/$name.err" - -get_pid() { - cat "$pid_file" -} - -is_running() { - [ -f "$pid_file" ] && ps `get_pid` > /dev/null 2>&1 -} - -case "$1" in - start) - if is_running; then - echo "Already started" - else - echo "Starting $name" - cd "$dir" - if [ -z "$user" ]; then - sudo $cmd >> "$stdout_log" 2>> "$stderr_log" & - else - sudo -u "$user" $cmd >> "$stdout_log" 2>> "$stderr_log" & - fi - echo $! > "$pid_file" - if ! is_running; then - echo "Unable to start, see $stdout_log and $stderr_log" - exit 1 - fi - fi - ;; - stop) - if is_running; then - echo -n "Stopping $name.." - kill `get_pid` - for i in {1..10} - do - if ! is_running; then - break - fi - - echo -n "." - sleep 1 - done - echo - - if is_running; then - echo "Not stopped; may still be shutting down or shutdown may have failed" - exit 1 - else - echo "Stopped" - if [ -f "$pid_file" ]; then - rm "$pid_file" - fi - fi - else - echo "Not running" - fi - ;; - restart) - $0 stop - if is_running; then - echo "Unable to stop, will not attempt to start" - exit 1 - fi - $0 start - ;; - status) - if is_running; then - echo "Running" - else - echo "Stopped" - exit 1 - fi - ;; - *) - echo "Usage: $0 {start|stop|restart|status}" - exit 1 - ;; -esac - -exit 0 diff --git a/boot/so_install.sh b/boot/so_install.sh index f3700dc0..e47a73f2 100644 --- a/boot/so_install.sh +++ b/boot/so_install.sh @@ -27,45 +27,18 @@ then cp /home/ubuntu/.ssh/authorized_keys /root/.ssh fi -# Set private IP in /etc/network/interfaces manually in the presence of public interface -# Some VM images don't add the private interface automatically, we have to do it during the component installation -if [[ $CLOUD_ENV == "openstack_nofloat" ]] -then - LOCAL_IP=$(cat /opt/config/local_ip_addr.txt) - CIDR=$(cat /opt/config/oam_network_cidr.txt) - BITMASK=$(echo $CIDR | cut -d"/" -f2) - - # Compute the netmask based on the network cidr - if [[ $BITMASK == "8" ]] - then - NETMASK=255.0.0.0 - elif [[ $BITMASK == "16" ]] - then - NETMASK=255.255.0.0 - elif [[ $BITMASK == "24" ]] - then - NETMASK=255.255.255.0 - fi - - echo "auto eth1" >> /etc/network/interfaces - echo "iface eth1 inet static" >> /etc/network/interfaces - echo " address $LOCAL_IP" >> /etc/network/interfaces - echo " netmask $NETMASK" >> /etc/network/interfaces - echo " mtu $MTU" >> /etc/network/interfaces - ifup eth1 -fi - # Download dependencies apt-get update apt-get install -y apt-transport-https ca-certificates wget git ntp ntpdate make # Download scripts from Nexus unzip -p -j /opt/boot-$ARTIFACTS_VERSION.zip so_vm_init.sh > /opt/so_vm_init.sh -unzip -p -j /opt/boot-$ARTIFACTS_VERSION.zip so_serv.sh > /opt/so_serv.sh +unzip -p -j /opt/boot-$ARTIFACTS_VERSION.zip serv.sh > /opt/so_serv.sh unzip -p -j /opt/boot-$ARTIFACTS_VERSION.zip imagetest.sh > /opt/imagetest.sh chmod +x /opt/imagetest.sh chmod +x /opt/so_vm_init.sh chmod +x /opt/so_serv.sh +sed -i "s|cmd=\"\"|cmd=\"./so_vm_init.sh\"|g" /opt/so_serv.sh mv /opt/so_serv.sh /etc/init.d update-rc.d so_serv.sh defaults @@ -104,23 +77,10 @@ service docker restart echo "nameserver "$DNS_IP_ADDR >> /etc/resolvconf/resolv.conf.d/head resolvconf -u -# Clone Gerrit repository +# Clone Gerrit repository and run docker containers. cd /opt git clone -b $GERRIT_BRANCH --single-branch $CODE_REPO test_lab SO_ENCRYPTION_KEY=$(cat /opt/test_lab/encryption.key) echo -n "$OPENSTACK_API_KEY" | openssl aes-128-ecb -e -K $SO_ENCRYPTION_KEY -nosalt | xxd -c 256 -p > /opt/config/api_key.txt -# Rename network interface in openstack Ubuntu 16.04 images. Then, reboot the VM to pick up changes -if [[ $CLOUD_ENV != "rackspace" ]] -then - sed -i "s/GRUB_CMDLINE_LINUX=.*/GRUB_CMDLINE_LINUX=\"net.ifnames=0 biosdevname=0\"/g" /etc/default/grub - grub-mkconfig -o /boot/grub/grub.cfg - sed -i "s/ens[0-9]*/eth0/g" /etc/network/interfaces.d/*.cfg - sed -i "s/ens[0-9]*/eth0/g" /etc/udev/rules.d/70-persistent-net.rules - echo 'network: {config: disabled}' >> /etc/cloud/cloud.cfg.d/99-disable-network-config.cfg - echo "APT::Periodic::Unattended-Upgrade \"0\";" >> /etc/apt/apt.conf.d/10periodic - reboot -fi - -# Run docker containers. For openstack Ubuntu 16.04 images this will run as a service after the VM has restarted ./so_vm_init.sh diff --git a/boot/so_serv.sh b/boot/so_serv.sh deleted file mode 100644 index 48e7259e..00000000 --- a/boot/so_serv.sh +++ /dev/null @@ -1,106 +0,0 @@ -#!/bin/sh -### BEGIN INIT INFO -# Provides: -# Required-Start: $remote_fs $syslog -# Required-Stop: $remote_fs $syslog -# Default-Start: 2 3 4 5 -# Default-Stop: 0 1 6 -# Short-Description: Start daemon at boot time -# Description: Enable service provided by daemon. -### END INIT INFO -HTTP_PROXY=$(cat /opt/config/http_proxy.txt) -HTTPS_PROXY=$(cat /opt/config/https_proxy.txt) - -if [ $HTTP_PROXY != "no_proxy" ] -then - export http_proxy=$HTTP_PROXY - export https_proxy=$HTTPS_PROXY -fi - -dir="/opt" -cmd="./so_vm_init.sh" -user="root" - -name=`basename $0` -pid_file="/var/run/$name.pid" -stdout_log="/var/log/$name.log" -stderr_log="/var/log/$name.err" - -get_pid() { - cat "$pid_file" -} - -is_running() { - [ -f "$pid_file" ] && ps `get_pid` > /dev/null 2>&1 -} - -case "$1" in - start) - if is_running; then - echo "Already started" - else - echo "Starting $name" - cd "$dir" - if [ -z "$user" ]; then - sudo $cmd >> "$stdout_log" 2>> "$stderr_log" & - else - sudo -u "$user" $cmd >> "$stdout_log" 2>> "$stderr_log" & - fi - echo $! > "$pid_file" - if ! is_running; then - echo "Unable to start, see $stdout_log and $stderr_log" - exit 1 - fi - fi - ;; - stop) - if is_running; then - echo -n "Stopping $name.." - kill `get_pid` - for i in {1..10} - do - if ! is_running; then - break - fi - - echo -n "." - sleep 1 - done - echo - - if is_running; then - echo "Not stopped; may still be shutting down or shutdown may have failed" - exit 1 - else - echo "Stopped" - if [ -f "$pid_file" ]; then - rm "$pid_file" - fi - fi - else - echo "Not running" - fi - ;; - restart) - $0 stop - if is_running; then - echo "Unable to stop, will not attempt to start" - exit 1 - fi - $0 start - ;; - status) - if is_running; then - echo "Running" - else - echo "Stopped" - exit 1 - fi - ;; - *) - echo "Usage: $0 {start|stop|restart|status}" - exit 1 - ;; -esac - -exit 0 diff --git a/boot/vid_install.sh b/boot/vid_install.sh index 7da62238..2f36e9f0 100644 --- a/boot/vid_install.sh +++ b/boot/vid_install.sh @@ -26,45 +26,18 @@ then cp /home/ubuntu/.ssh/authorized_keys /root/.ssh fi -# Set private IP in /etc/network/interfaces manually in the presence of public interface -# Some VM images don't add the private interface automatically, we have to do it during the component installation -if [[ $CLOUD_ENV == "openstack_nofloat" ]] -then - LOCAL_IP=$(cat /opt/config/local_ip_addr.txt) - CIDR=$(cat /opt/config/oam_network_cidr.txt) - BITMASK=$(echo $CIDR | cut -d"/" -f2) - - # Compute the netmask based on the network cidr - if [[ $BITMASK == "8" ]] - then - NETMASK=255.0.0.0 - elif [[ $BITMASK == "16" ]] - then - NETMASK=255.255.0.0 - elif [[ $BITMASK == "24" ]] - then - NETMASK=255.255.255.0 - fi - - echo "auto eth1" >> /etc/network/interfaces - echo "iface eth1 inet static" >> /etc/network/interfaces - echo " address $LOCAL_IP" >> /etc/network/interfaces - echo " netmask $NETMASK" >> /etc/network/interfaces - echo " mtu $MTU" >> /etc/network/interfaces - ifup eth1 -fi - # Download dependencies apt-get update apt-get install -y apt-transport-https ca-certificates wget git ntp ntpdate make # Download scripts from Nexus unzip -p -j /opt/boot-$ARTIFACTS_VERSION.zip vid_vm_init.sh > /opt/vid_vm_init.sh -unzip -p -j /opt/boot-$ARTIFACTS_VERSION.zip vid_serv.sh > /opt/vid_serv.sh +unzip -p -j /opt/boot-$ARTIFACTS_VERSION.zip serv.sh > /opt/vid_serv.sh unzip -p -j /opt/boot-$ARTIFACTS_VERSION.zip imagetest.sh > /opt/imagetest.sh chmod +x /opt/imagetest.sh chmod +x /opt/vid_vm_init.sh chmod +x /opt/vid_serv.sh +sed -i "s|cmd=\"\"|cmd=\"./vid_vm_init.sh\"|g" /opt/vid_serv.sh mv /opt/vid_serv.sh /etc/init.d update-rc.d vid_serv.sh defaults diff --git a/boot/vid_serv.sh b/boot/vid_serv.sh deleted file mode 100644 index 8e92d204..00000000 --- a/boot/vid_serv.sh +++ /dev/null @@ -1,106 +0,0 @@ -#!/bin/sh -### BEGIN INIT INFO -# Provides: -# Required-Start: $remote_fs $syslog -# Required-Stop: $remote_fs $syslog -# Default-Start: 2 3 4 5 -# Default-Stop: 0 1 6 -# Short-Description: Start daemon at boot time -# Description: Enable service provided by daemon. -### END INIT INFO -HTTP_PROXY=$(cat /opt/config/http_proxy.txt) -HTTPS_PROXY=$(cat /opt/config/https_proxy.txt) - -if [ $HTTP_PROXY != "no_proxy" ] -then - export http_proxy=$HTTP_PROXY - export https_proxy=$HTTPS_PROXY -fi - -dir="/opt" -cmd="./vid_vm_init.sh" -user="root" - -name=`basename $0` -pid_file="/var/run/$name.pid" -stdout_log="/var/log/$name.log" -stderr_log="/var/log/$name.err" - -get_pid() { - cat "$pid_file" -} - -is_running() { - [ -f "$pid_file" ] && ps `get_pid` > /dev/null 2>&1 -} - -case "$1" in - start) - if is_running; then - echo "Already started" - else - echo "Starting $name" - cd "$dir" - if [ -z "$user" ]; then - sudo $cmd >> "$stdout_log" 2>> "$stderr_log" & - else - sudo -u "$user" $cmd >> "$stdout_log" 2>> "$stderr_log" & - fi - echo $! > "$pid_file" - if ! is_running; then - echo "Unable to start, see $stdout_log and $stderr_log" - exit 1 - fi - fi - ;; - stop) - if is_running; then - echo -n "Stopping $name.." - kill `get_pid` - for i in {1..10} - do - if ! is_running; then - break - fi - - echo -n "." - sleep 1 - done - echo - - if is_running; then - echo "Not stopped; may still be shutting down or shutdown may have failed" - exit 1 - else - echo "Stopped" - if [ -f "$pid_file" ]; then - rm "$pid_file" - fi - fi - else - echo "Not running" - fi - ;; - restart) - $0 stop - if is_running; then - echo "Unable to stop, will not attempt to start" - exit 1 - fi - $0 start - ;; - status) - if is_running; then - echo "Running" - else - echo "Stopped" - exit 1 - fi - ;; - *) - echo "Usage: $0 {start|stop|restart|status}" - exit 1 - ;; -esac - -exit 0 -- cgit 1.2.3-korg